linux/sound/soc/sof/sof-audio.c

980 lines
26 KiB
C
Raw Permalink Normal View History

// SPDX-License-Identifier: (GPL-2.0-only OR BSD-3-Clause)
//
// This file is provided under a dual BSD/GPLv2 license. When using or
// redistributing this file, you may do so under either license.
//
// Copyright(c) 2019 Intel Corporation
//
// Author: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
//
#include <linux/bitfield.h>
#include <trace/events/sof.h>
#include "sof-audio.h"
#include "ops.h"
static bool is_virtual_widget(struct snd_sof_dev *sdev, struct snd_soc_dapm_widget *widget,
const char *func)
{
switch (widget->id) {
case snd_soc_dapm_out_drv:
case snd_soc_dapm_output:
case snd_soc_dapm_input:
dev_dbg(sdev->dev, "%s: %s is a virtual widget\n", func, widget->name);
return true;
default:
return false;
}
}
static void sof_reset_route_setup_status(struct snd_sof_dev *sdev, struct snd_sof_widget *widget)
{
const struct sof_ipc_tplg_ops *tplg_ops = sof_ipc_get_ops(sdev, tplg);
struct snd_sof_route *sroute;
list_for_each_entry(sroute, &sdev->route_list, list)
if (sroute->src_widget == widget || sroute->sink_widget == widget) {
if (sroute->setup && tplg_ops && tplg_ops->route_free)
tplg_ops->route_free(sdev, sroute);
sroute->setup = false;
}
}
static int sof_widget_free_unlocked(struct snd_sof_dev *sdev,
struct snd_sof_widget *swidget)
{
const struct sof_ipc_tplg_ops *tplg_ops = sof_ipc_get_ops(sdev, tplg);
struct snd_sof_pipeline *spipe = swidget->spipe;
int err = 0;
int ret;
if (!swidget->private)
return 0;
trace_sof_widget_free(swidget);
/* only free when use_count is 0 */
if (--swidget->use_count)
return 0;
/* reset route setup status for all routes that contain this widget */
sof_reset_route_setup_status(sdev, swidget);
/* free DAI config and continue to free widget even if it fails */
if (WIDGET_IS_DAI(swidget->id)) {
struct snd_sof_dai_config_data data;
unsigned int flags = SOF_DAI_CONFIG_FLAGS_HW_FREE;
data.dai_data = DMA_CHAN_INVALID;
if (tplg_ops && tplg_ops->dai_config) {
err = tplg_ops->dai_config(sdev, swidget, flags, &data);
if (err < 0)
dev_err(sdev->dev, "failed to free config for widget %s\n",
swidget->widget->name);
}
}
/* continue to disable core even if IPC fails */
if (tplg_ops && tplg_ops->widget_free) {
ret = tplg_ops->widget_free(sdev, swidget);
if (ret < 0 && !err)
err = ret;
}
/*
* decrement ref count for cores associated with all modules in the pipeline and clear
* the complete flag
*/
if (swidget->id == snd_soc_dapm_scheduler) {
int i;
for_each_set_bit(i, &spipe->core_mask, sdev->num_cores) {
ret = snd_sof_dsp_core_put(sdev, i);
if (ret < 0) {
dev_err(sdev->dev, "failed to disable target core: %d for pipeline %s\n",
i, swidget->widget->name);
if (!err)
err = ret;
}
}
swidget->spipe->complete = 0;
}
/*
* free the scheduler widget (same as pipe_widget) associated with the current swidget.
* skip for static pipelines
*/
if (swidget->spipe && swidget->dynamic_pipeline_widget &&
swidget->id != snd_soc_dapm_scheduler) {
ret = sof_widget_free_unlocked(sdev, swidget->spipe->pipe_widget);
if (ret < 0 && !err)
err = ret;
}
if (!err)
dev_dbg(sdev->dev, "widget %s freed\n", swidget->widget->name);
return err;
}
int sof_widget_free(struct snd_sof_dev *sdev, struct snd_sof_widget *swidget)
{
int ret;
mutex_lock(&swidget->setup_mutex);
ret = sof_widget_free_unlocked(sdev, swidget);
mutex_unlock(&swidget->setup_mutex);
return ret;
}
EXPORT_SYMBOL(sof_widget_free);
static int sof_widget_setup_unlocked(struct snd_sof_dev *sdev,
struct snd_sof_widget *swidget)
{
const struct sof_ipc_tplg_ops *tplg_ops = sof_ipc_get_ops(sdev, tplg);
struct snd_sof_pipeline *spipe = swidget->spipe;
bool use_count_decremented = false;
int ret;
int i;
/* skip if there is no private data */
if (!swidget->private)
return 0;
trace_sof_widget_setup(swidget);
/* widget already set up */
if (++swidget->use_count > 1)
return 0;
/*
* The scheduler widget for a pipeline is not part of the connected DAPM
* widget list and it needs to be set up before the widgets in the pipeline
* are set up. The use_count for the scheduler widget is incremented for every
* widget in a given pipeline to ensure that it is freed only after the last
* widget in the pipeline is freed. Skip setting up scheduler widget for static pipelines.
*/
if (swidget->dynamic_pipeline_widget && swidget->id != snd_soc_dapm_scheduler) {
if (!swidget->spipe || !swidget->spipe->pipe_widget) {
dev_err(sdev->dev, "No pipeline set for %s\n", swidget->widget->name);
ret = -EINVAL;
goto use_count_dec;
}
ret = sof_widget_setup_unlocked(sdev, swidget->spipe->pipe_widget);
if (ret < 0)
goto use_count_dec;
}
/* update ref count for cores associated with all modules in the pipeline */
if (swidget->id == snd_soc_dapm_scheduler) {
for_each_set_bit(i, &spipe->core_mask, sdev->num_cores) {
ret = snd_sof_dsp_core_get(sdev, i);
if (ret < 0) {
dev_err(sdev->dev, "failed to enable target core %d for pipeline %s\n",
i, swidget->widget->name);
goto pipe_widget_free;
}
}
}
/* setup widget in the DSP */
if (tplg_ops && tplg_ops->widget_setup) {
ret = tplg_ops->widget_setup(sdev, swidget);
if (ret < 0)
goto pipe_widget_free;
}
/* send config for DAI components */
if (WIDGET_IS_DAI(swidget->id)) {
unsigned int flags = SOF_DAI_CONFIG_FLAGS_HW_PARAMS;
/*
* The config flags saved during BE DAI hw_params will be used for IPC3. IPC4 does
* not use the flags argument.
*/
if (tplg_ops && tplg_ops->dai_config) {
ret = tplg_ops->dai_config(sdev, swidget, flags, NULL);
if (ret < 0)
goto widget_free;
}
}
/* restore kcontrols for widget */
if (tplg_ops && tplg_ops->control && tplg_ops->control->widget_kcontrol_setup) {
ret = tplg_ops->control->widget_kcontrol_setup(sdev, swidget);
if (ret < 0)
goto widget_free;
}
dev_dbg(sdev->dev, "widget %s setup complete\n", swidget->widget->name);
return 0;
widget_free:
/* widget use_count will be decremented by sof_widget_free() */
sof_widget_free_unlocked(sdev, swidget);
use_count_decremented = true;
pipe_widget_free:
if (swidget->id != snd_soc_dapm_scheduler) {
sof_widget_free_unlocked(sdev, swidget->spipe->pipe_widget);
} else {
int j;
/* decrement ref count for all cores that were updated previously */
for_each_set_bit(j, &spipe->core_mask, sdev->num_cores) {
if (j >= i)
break;
snd_sof_dsp_core_put(sdev, j);
}
}
use_count_dec:
if (!use_count_decremented)
swidget->use_count--;
return ret;
}
int sof_widget_setup(struct snd_sof_dev *sdev, struct snd_sof_widget *swidget)
{
int ret;
mutex_lock(&swidget->setup_mutex);
ret = sof_widget_setup_unlocked(sdev, swidget);
mutex_unlock(&swidget->setup_mutex);
return ret;
}
EXPORT_SYMBOL(sof_widget_setup);
int sof_route_setup(struct snd_sof_dev *sdev, struct snd_soc_dapm_widget *wsource,
struct snd_soc_dapm_widget *wsink)
{
const struct sof_ipc_tplg_ops *tplg_ops = sof_ipc_get_ops(sdev, tplg);
struct snd_sof_widget *src_widget = wsource->dobj.private;
struct snd_sof_widget *sink_widget = wsink->dobj.private;
struct snd_sof_route *sroute;
bool route_found = false;
/* ignore routes involving virtual widgets in topology */
if (is_virtual_widget(sdev, src_widget->widget, __func__) ||
is_virtual_widget(sdev, sink_widget->widget, __func__))
return 0;
/* find route matching source and sink widgets */
list_for_each_entry(sroute, &sdev->route_list, list)
if (sroute->src_widget == src_widget && sroute->sink_widget == sink_widget) {
route_found = true;
break;
}
if (!route_found) {
dev_err(sdev->dev, "error: cannot find SOF route for source %s -> %s sink\n",
wsource->name, wsink->name);
return -EINVAL;
}
/* nothing to do if route is already set up */
if (sroute->setup)
return 0;
if (tplg_ops && tplg_ops->route_setup) {
int ret = tplg_ops->route_setup(sdev, sroute);
if (ret < 0)
return ret;
}
sroute->setup = true;
return 0;
}
static int sof_setup_pipeline_connections(struct snd_sof_dev *sdev,
struct snd_soc_dapm_widget_list *list, int dir)
{
const struct sof_ipc_tplg_ops *tplg_ops = sof_ipc_get_ops(sdev, tplg);
struct snd_soc_dapm_widget *widget;
struct snd_sof_route *sroute;
struct snd_soc_dapm_path *p;
int ret = 0;
int i;
/*
* Set up connections between widgets in the sink/source paths based on direction.
* Some non-SOF widgets exist in topology either for compatibility or for the
* purpose of connecting a pipeline from a host to a DAI in order to receive the DAPM
* events. But they are not handled by the firmware. So ignore them.
*/
if (dir == SNDRV_PCM_STREAM_PLAYBACK) {
for_each_dapm_widgets(list, i, widget) {
if (!widget->dobj.private)
continue;
snd_soc_dapm_widget_for_each_sink_path(widget, p) {
if (!widget_in_list(list, p->sink))
continue;
if (p->sink->dobj.private) {
ret = sof_route_setup(sdev, widget, p->sink);
if (ret < 0)
return ret;
}
}
}
} else {
for_each_dapm_widgets(list, i, widget) {
if (!widget->dobj.private)
continue;
snd_soc_dapm_widget_for_each_source_path(widget, p) {
if (!widget_in_list(list, p->source))
continue;
if (p->source->dobj.private) {
ret = sof_route_setup(sdev, p->source, widget);
if (ret < 0)
return ret;
}
}
}
}
/*
* The above loop handles connections between widgets that belong to the DAPM widget list.
* This is not sufficient to handle loopback cases between pipelines configured with
* different directions, e.g. a sidetone or an amplifier feedback connected to a speaker
* protection module.
*/
list_for_each_entry(sroute, &sdev->route_list, list) {
bool src_widget_in_dapm_list, sink_widget_in_dapm_list;
struct snd_sof_widget *swidget;
if (sroute->setup)
continue;
src_widget_in_dapm_list = widget_in_list(list, sroute->src_widget->widget);
sink_widget_in_dapm_list = widget_in_list(list, sroute->sink_widget->widget);
/*
* if both source and sink are in the DAPM list, the route must already have been
* set up above. And if neither are in the DAPM list, the route shouldn't be
* handled now.
*/
if (src_widget_in_dapm_list == sink_widget_in_dapm_list)
continue;
/*
* At this point either the source widget or the sink widget is in the DAPM list
* with a route that might need to be set up. Check the use_count of the widget
* that is not in the DAPM list to confirm if it is in use currently before setting
* up the route.
*/
if (src_widget_in_dapm_list)
swidget = sroute->sink_widget;
else
swidget = sroute->src_widget;
mutex_lock(&swidget->setup_mutex);
if (!swidget->use_count) {
mutex_unlock(&swidget->setup_mutex);
continue;
}
if (tplg_ops && tplg_ops->route_setup) {
/*
* this route will get freed when either the source widget or the sink
* widget is freed during hw_free
*/
ret = tplg_ops->route_setup(sdev, sroute);
if (!ret)
sroute->setup = true;
}
mutex_unlock(&swidget->setup_mutex);
if (ret < 0)
return ret;
}
return 0;
}
ASoC: SOF: Add a prepare op to IPC topology widget ops In order to set up a pipeline with IPC4, the total memory usage for the pipeline needs to be calculated based on the list of connected widgets. Add a new ipc_prepare() op to struct sof_ipc_tplg_widget_ops that will be used to calculate the memory usage for each widget in the pipelines associated with a PCM and prepare the widget for getting set up in the DSP. The prepare step will be used to allocate memory for the IPC payload, assign instance ID and update the config data for the widget based on the runtime PCM params. Once prepared, the setup step is used to send the IPC to create the widget in the DSP. Add an ipc_unprepare() op to unprepare the widget i.e free the memory allocated during prepare, free the instance ID etc. This should be invoked after the widget is freed. A new flag "prepared" is added to struct snd_sof_widget to track the prepared status of widgets. Also, IPC4 requires the platform_params and the runtime PCM params in order to prepare a widget for set up. So modify the signature of sof_pcm_setup_connected_widgets() and sof_widget_list_setup() to accept these as arguments. Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://lore.kernel.org/r/20220426171743.171061-12-ranjani.sridharan@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-04-26 10:17:43 -07:00
static void
sof_unprepare_widgets_in_path(struct snd_sof_dev *sdev, struct snd_soc_dapm_widget *widget,
struct snd_soc_dapm_widget_list *list)
ASoC: SOF: Add a prepare op to IPC topology widget ops In order to set up a pipeline with IPC4, the total memory usage for the pipeline needs to be calculated based on the list of connected widgets. Add a new ipc_prepare() op to struct sof_ipc_tplg_widget_ops that will be used to calculate the memory usage for each widget in the pipelines associated with a PCM and prepare the widget for getting set up in the DSP. The prepare step will be used to allocate memory for the IPC payload, assign instance ID and update the config data for the widget based on the runtime PCM params. Once prepared, the setup step is used to send the IPC to create the widget in the DSP. Add an ipc_unprepare() op to unprepare the widget i.e free the memory allocated during prepare, free the instance ID etc. This should be invoked after the widget is freed. A new flag "prepared" is added to struct snd_sof_widget to track the prepared status of widgets. Also, IPC4 requires the platform_params and the runtime PCM params in order to prepare a widget for set up. So modify the signature of sof_pcm_setup_connected_widgets() and sof_widget_list_setup() to accept these as arguments. Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://lore.kernel.org/r/20220426171743.171061-12-ranjani.sridharan@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-04-26 10:17:43 -07:00
{
const struct sof_ipc_tplg_ops *tplg_ops = sof_ipc_get_ops(sdev, tplg);
ASoC: SOF: Add a prepare op to IPC topology widget ops In order to set up a pipeline with IPC4, the total memory usage for the pipeline needs to be calculated based on the list of connected widgets. Add a new ipc_prepare() op to struct sof_ipc_tplg_widget_ops that will be used to calculate the memory usage for each widget in the pipelines associated with a PCM and prepare the widget for getting set up in the DSP. The prepare step will be used to allocate memory for the IPC payload, assign instance ID and update the config data for the widget based on the runtime PCM params. Once prepared, the setup step is used to send the IPC to create the widget in the DSP. Add an ipc_unprepare() op to unprepare the widget i.e free the memory allocated during prepare, free the instance ID etc. This should be invoked after the widget is freed. A new flag "prepared" is added to struct snd_sof_widget to track the prepared status of widgets. Also, IPC4 requires the platform_params and the runtime PCM params in order to prepare a widget for set up. So modify the signature of sof_pcm_setup_connected_widgets() and sof_widget_list_setup() to accept these as arguments. Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://lore.kernel.org/r/20220426171743.171061-12-ranjani.sridharan@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-04-26 10:17:43 -07:00
struct snd_sof_widget *swidget = widget->dobj.private;
const struct sof_ipc_tplg_widget_ops *widget_ops;
ASoC: SOF: Add a prepare op to IPC topology widget ops In order to set up a pipeline with IPC4, the total memory usage for the pipeline needs to be calculated based on the list of connected widgets. Add a new ipc_prepare() op to struct sof_ipc_tplg_widget_ops that will be used to calculate the memory usage for each widget in the pipelines associated with a PCM and prepare the widget for getting set up in the DSP. The prepare step will be used to allocate memory for the IPC payload, assign instance ID and update the config data for the widget based on the runtime PCM params. Once prepared, the setup step is used to send the IPC to create the widget in the DSP. Add an ipc_unprepare() op to unprepare the widget i.e free the memory allocated during prepare, free the instance ID etc. This should be invoked after the widget is freed. A new flag "prepared" is added to struct snd_sof_widget to track the prepared status of widgets. Also, IPC4 requires the platform_params and the runtime PCM params in order to prepare a widget for set up. So modify the signature of sof_pcm_setup_connected_widgets() and sof_widget_list_setup() to accept these as arguments. Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://lore.kernel.org/r/20220426171743.171061-12-ranjani.sridharan@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-04-26 10:17:43 -07:00
struct snd_soc_dapm_path *p;
if (is_virtual_widget(sdev, widget, __func__))
return;
/* skip if the widget is in use or if it is already unprepared */
if (!swidget || !swidget->prepared || swidget->use_count > 0)
goto sink_unprepare;
widget_ops = tplg_ops ? tplg_ops->widget : NULL;
if (widget_ops && widget_ops[widget->id].ipc_unprepare)
/* unprepare the source widget */
widget_ops[widget->id].ipc_unprepare(swidget);
ASoC: SOF: Add a prepare op to IPC topology widget ops In order to set up a pipeline with IPC4, the total memory usage for the pipeline needs to be calculated based on the list of connected widgets. Add a new ipc_prepare() op to struct sof_ipc_tplg_widget_ops that will be used to calculate the memory usage for each widget in the pipelines associated with a PCM and prepare the widget for getting set up in the DSP. The prepare step will be used to allocate memory for the IPC payload, assign instance ID and update the config data for the widget based on the runtime PCM params. Once prepared, the setup step is used to send the IPC to create the widget in the DSP. Add an ipc_unprepare() op to unprepare the widget i.e free the memory allocated during prepare, free the instance ID etc. This should be invoked after the widget is freed. A new flag "prepared" is added to struct snd_sof_widget to track the prepared status of widgets. Also, IPC4 requires the platform_params and the runtime PCM params in order to prepare a widget for set up. So modify the signature of sof_pcm_setup_connected_widgets() and sof_widget_list_setup() to accept these as arguments. Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://lore.kernel.org/r/20220426171743.171061-12-ranjani.sridharan@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-04-26 10:17:43 -07:00
swidget->prepared = false;
sink_unprepare:
ASoC: SOF: Add a prepare op to IPC topology widget ops In order to set up a pipeline with IPC4, the total memory usage for the pipeline needs to be calculated based on the list of connected widgets. Add a new ipc_prepare() op to struct sof_ipc_tplg_widget_ops that will be used to calculate the memory usage for each widget in the pipelines associated with a PCM and prepare the widget for getting set up in the DSP. The prepare step will be used to allocate memory for the IPC payload, assign instance ID and update the config data for the widget based on the runtime PCM params. Once prepared, the setup step is used to send the IPC to create the widget in the DSP. Add an ipc_unprepare() op to unprepare the widget i.e free the memory allocated during prepare, free the instance ID etc. This should be invoked after the widget is freed. A new flag "prepared" is added to struct snd_sof_widget to track the prepared status of widgets. Also, IPC4 requires the platform_params and the runtime PCM params in order to prepare a widget for set up. So modify the signature of sof_pcm_setup_connected_widgets() and sof_widget_list_setup() to accept these as arguments. Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://lore.kernel.org/r/20220426171743.171061-12-ranjani.sridharan@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-04-26 10:17:43 -07:00
/* unprepare all widgets in the sink paths */
snd_soc_dapm_widget_for_each_sink_path(widget, p) {
if (!widget_in_list(list, p->sink))
continue;
ASoC: SOF: Add a prepare op to IPC topology widget ops In order to set up a pipeline with IPC4, the total memory usage for the pipeline needs to be calculated based on the list of connected widgets. Add a new ipc_prepare() op to struct sof_ipc_tplg_widget_ops that will be used to calculate the memory usage for each widget in the pipelines associated with a PCM and prepare the widget for getting set up in the DSP. The prepare step will be used to allocate memory for the IPC payload, assign instance ID and update the config data for the widget based on the runtime PCM params. Once prepared, the setup step is used to send the IPC to create the widget in the DSP. Add an ipc_unprepare() op to unprepare the widget i.e free the memory allocated during prepare, free the instance ID etc. This should be invoked after the widget is freed. A new flag "prepared" is added to struct snd_sof_widget to track the prepared status of widgets. Also, IPC4 requires the platform_params and the runtime PCM params in order to prepare a widget for set up. So modify the signature of sof_pcm_setup_connected_widgets() and sof_widget_list_setup() to accept these as arguments. Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://lore.kernel.org/r/20220426171743.171061-12-ranjani.sridharan@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-04-26 10:17:43 -07:00
if (!p->walking && p->sink->dobj.private) {
p->walking = true;
sof_unprepare_widgets_in_path(sdev, p->sink, list);
ASoC: SOF: Add a prepare op to IPC topology widget ops In order to set up a pipeline with IPC4, the total memory usage for the pipeline needs to be calculated based on the list of connected widgets. Add a new ipc_prepare() op to struct sof_ipc_tplg_widget_ops that will be used to calculate the memory usage for each widget in the pipelines associated with a PCM and prepare the widget for getting set up in the DSP. The prepare step will be used to allocate memory for the IPC payload, assign instance ID and update the config data for the widget based on the runtime PCM params. Once prepared, the setup step is used to send the IPC to create the widget in the DSP. Add an ipc_unprepare() op to unprepare the widget i.e free the memory allocated during prepare, free the instance ID etc. This should be invoked after the widget is freed. A new flag "prepared" is added to struct snd_sof_widget to track the prepared status of widgets. Also, IPC4 requires the platform_params and the runtime PCM params in order to prepare a widget for set up. So modify the signature of sof_pcm_setup_connected_widgets() and sof_widget_list_setup() to accept these as arguments. Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://lore.kernel.org/r/20220426171743.171061-12-ranjani.sridharan@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-04-26 10:17:43 -07:00
p->walking = false;
}
}
}
static int
sof_prepare_widgets_in_path(struct snd_sof_dev *sdev, struct snd_soc_dapm_widget *widget,
struct snd_pcm_hw_params *fe_params,
struct snd_sof_platform_stream_params *platform_params,
struct snd_pcm_hw_params *pipeline_params, int dir,
struct snd_soc_dapm_widget_list *list)
ASoC: SOF: Add a prepare op to IPC topology widget ops In order to set up a pipeline with IPC4, the total memory usage for the pipeline needs to be calculated based on the list of connected widgets. Add a new ipc_prepare() op to struct sof_ipc_tplg_widget_ops that will be used to calculate the memory usage for each widget in the pipelines associated with a PCM and prepare the widget for getting set up in the DSP. The prepare step will be used to allocate memory for the IPC payload, assign instance ID and update the config data for the widget based on the runtime PCM params. Once prepared, the setup step is used to send the IPC to create the widget in the DSP. Add an ipc_unprepare() op to unprepare the widget i.e free the memory allocated during prepare, free the instance ID etc. This should be invoked after the widget is freed. A new flag "prepared" is added to struct snd_sof_widget to track the prepared status of widgets. Also, IPC4 requires the platform_params and the runtime PCM params in order to prepare a widget for set up. So modify the signature of sof_pcm_setup_connected_widgets() and sof_widget_list_setup() to accept these as arguments. Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://lore.kernel.org/r/20220426171743.171061-12-ranjani.sridharan@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-04-26 10:17:43 -07:00
{
const struct sof_ipc_tplg_ops *tplg_ops = sof_ipc_get_ops(sdev, tplg);
ASoC: SOF: Add a prepare op to IPC topology widget ops In order to set up a pipeline with IPC4, the total memory usage for the pipeline needs to be calculated based on the list of connected widgets. Add a new ipc_prepare() op to struct sof_ipc_tplg_widget_ops that will be used to calculate the memory usage for each widget in the pipelines associated with a PCM and prepare the widget for getting set up in the DSP. The prepare step will be used to allocate memory for the IPC payload, assign instance ID and update the config data for the widget based on the runtime PCM params. Once prepared, the setup step is used to send the IPC to create the widget in the DSP. Add an ipc_unprepare() op to unprepare the widget i.e free the memory allocated during prepare, free the instance ID etc. This should be invoked after the widget is freed. A new flag "prepared" is added to struct snd_sof_widget to track the prepared status of widgets. Also, IPC4 requires the platform_params and the runtime PCM params in order to prepare a widget for set up. So modify the signature of sof_pcm_setup_connected_widgets() and sof_widget_list_setup() to accept these as arguments. Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://lore.kernel.org/r/20220426171743.171061-12-ranjani.sridharan@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-04-26 10:17:43 -07:00
struct snd_sof_widget *swidget = widget->dobj.private;
const struct sof_ipc_tplg_widget_ops *widget_ops;
ASoC: SOF: Add a prepare op to IPC topology widget ops In order to set up a pipeline with IPC4, the total memory usage for the pipeline needs to be calculated based on the list of connected widgets. Add a new ipc_prepare() op to struct sof_ipc_tplg_widget_ops that will be used to calculate the memory usage for each widget in the pipelines associated with a PCM and prepare the widget for getting set up in the DSP. The prepare step will be used to allocate memory for the IPC payload, assign instance ID and update the config data for the widget based on the runtime PCM params. Once prepared, the setup step is used to send the IPC to create the widget in the DSP. Add an ipc_unprepare() op to unprepare the widget i.e free the memory allocated during prepare, free the instance ID etc. This should be invoked after the widget is freed. A new flag "prepared" is added to struct snd_sof_widget to track the prepared status of widgets. Also, IPC4 requires the platform_params and the runtime PCM params in order to prepare a widget for set up. So modify the signature of sof_pcm_setup_connected_widgets() and sof_widget_list_setup() to accept these as arguments. Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://lore.kernel.org/r/20220426171743.171061-12-ranjani.sridharan@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-04-26 10:17:43 -07:00
struct snd_soc_dapm_path *p;
int ret;
if (is_virtual_widget(sdev, widget, __func__))
return 0;
widget_ops = tplg_ops ? tplg_ops->widget : NULL;
if (!widget_ops)
return 0;
if (!swidget || !widget_ops[widget->id].ipc_prepare || swidget->prepared)
ASoC: SOF: Add a prepare op to IPC topology widget ops In order to set up a pipeline with IPC4, the total memory usage for the pipeline needs to be calculated based on the list of connected widgets. Add a new ipc_prepare() op to struct sof_ipc_tplg_widget_ops that will be used to calculate the memory usage for each widget in the pipelines associated with a PCM and prepare the widget for getting set up in the DSP. The prepare step will be used to allocate memory for the IPC payload, assign instance ID and update the config data for the widget based on the runtime PCM params. Once prepared, the setup step is used to send the IPC to create the widget in the DSP. Add an ipc_unprepare() op to unprepare the widget i.e free the memory allocated during prepare, free the instance ID etc. This should be invoked after the widget is freed. A new flag "prepared" is added to struct snd_sof_widget to track the prepared status of widgets. Also, IPC4 requires the platform_params and the runtime PCM params in order to prepare a widget for set up. So modify the signature of sof_pcm_setup_connected_widgets() and sof_widget_list_setup() to accept these as arguments. Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://lore.kernel.org/r/20220426171743.171061-12-ranjani.sridharan@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-04-26 10:17:43 -07:00
goto sink_prepare;
/* prepare the source widget */
ret = widget_ops[widget->id].ipc_prepare(swidget, fe_params, platform_params,
pipeline_params, dir);
if (ret < 0) {
dev_err(sdev->dev, "failed to prepare widget %s\n", widget->name);
return ret;
}
swidget->prepared = true;
sink_prepare:
/* prepare all widgets in the sink paths */
snd_soc_dapm_widget_for_each_sink_path(widget, p) {
if (!widget_in_list(list, p->sink))
continue;
ASoC: SOF: Add a prepare op to IPC topology widget ops In order to set up a pipeline with IPC4, the total memory usage for the pipeline needs to be calculated based on the list of connected widgets. Add a new ipc_prepare() op to struct sof_ipc_tplg_widget_ops that will be used to calculate the memory usage for each widget in the pipelines associated with a PCM and prepare the widget for getting set up in the DSP. The prepare step will be used to allocate memory for the IPC payload, assign instance ID and update the config data for the widget based on the runtime PCM params. Once prepared, the setup step is used to send the IPC to create the widget in the DSP. Add an ipc_unprepare() op to unprepare the widget i.e free the memory allocated during prepare, free the instance ID etc. This should be invoked after the widget is freed. A new flag "prepared" is added to struct snd_sof_widget to track the prepared status of widgets. Also, IPC4 requires the platform_params and the runtime PCM params in order to prepare a widget for set up. So modify the signature of sof_pcm_setup_connected_widgets() and sof_widget_list_setup() to accept these as arguments. Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://lore.kernel.org/r/20220426171743.171061-12-ranjani.sridharan@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-04-26 10:17:43 -07:00
if (!p->walking && p->sink->dobj.private) {
p->walking = true;
ret = sof_prepare_widgets_in_path(sdev, p->sink, fe_params,
platform_params, pipeline_params, dir,
list);
ASoC: SOF: Add a prepare op to IPC topology widget ops In order to set up a pipeline with IPC4, the total memory usage for the pipeline needs to be calculated based on the list of connected widgets. Add a new ipc_prepare() op to struct sof_ipc_tplg_widget_ops that will be used to calculate the memory usage for each widget in the pipelines associated with a PCM and prepare the widget for getting set up in the DSP. The prepare step will be used to allocate memory for the IPC payload, assign instance ID and update the config data for the widget based on the runtime PCM params. Once prepared, the setup step is used to send the IPC to create the widget in the DSP. Add an ipc_unprepare() op to unprepare the widget i.e free the memory allocated during prepare, free the instance ID etc. This should be invoked after the widget is freed. A new flag "prepared" is added to struct snd_sof_widget to track the prepared status of widgets. Also, IPC4 requires the platform_params and the runtime PCM params in order to prepare a widget for set up. So modify the signature of sof_pcm_setup_connected_widgets() and sof_widget_list_setup() to accept these as arguments. Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://lore.kernel.org/r/20220426171743.171061-12-ranjani.sridharan@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-04-26 10:17:43 -07:00
p->walking = false;
if (ret < 0) {
/* unprepare the source widget */
if (widget_ops[widget->id].ipc_unprepare &&
swidget && swidget->prepared && swidget->use_count == 0) {
ASoC: SOF: Add a prepare op to IPC topology widget ops In order to set up a pipeline with IPC4, the total memory usage for the pipeline needs to be calculated based on the list of connected widgets. Add a new ipc_prepare() op to struct sof_ipc_tplg_widget_ops that will be used to calculate the memory usage for each widget in the pipelines associated with a PCM and prepare the widget for getting set up in the DSP. The prepare step will be used to allocate memory for the IPC payload, assign instance ID and update the config data for the widget based on the runtime PCM params. Once prepared, the setup step is used to send the IPC to create the widget in the DSP. Add an ipc_unprepare() op to unprepare the widget i.e free the memory allocated during prepare, free the instance ID etc. This should be invoked after the widget is freed. A new flag "prepared" is added to struct snd_sof_widget to track the prepared status of widgets. Also, IPC4 requires the platform_params and the runtime PCM params in order to prepare a widget for set up. So modify the signature of sof_pcm_setup_connected_widgets() and sof_widget_list_setup() to accept these as arguments. Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://lore.kernel.org/r/20220426171743.171061-12-ranjani.sridharan@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-04-26 10:17:43 -07:00
widget_ops[widget->id].ipc_unprepare(swidget);
swidget->prepared = false;
}
return ret;
}
}
}
return 0;
}
/*
* free all widgets in the sink path starting from the source widget
* (DAI type for capture, AIF type for playback)
*/
static int sof_free_widgets_in_path(struct snd_sof_dev *sdev, struct snd_soc_dapm_widget *widget,
int dir, struct snd_sof_pcm *spcm)
{
struct snd_soc_dapm_widget_list *list = spcm->stream[dir].list;
struct snd_soc_dapm_path *p;
int err;
int ret = 0;
if (is_virtual_widget(sdev, widget, __func__))
return 0;
if (widget->dobj.private) {
err = sof_widget_free(sdev, widget->dobj.private);
if (err < 0)
ret = err;
}
/* free all widgets in the sink paths even in case of error to keep use counts balanced */
snd_soc_dapm_widget_for_each_sink_path(widget, p) {
if (!p->walking) {
if (!widget_in_list(list, p->sink))
continue;
p->walking = true;
err = sof_free_widgets_in_path(sdev, p->sink, dir, spcm);
if (err < 0)
ret = err;
p->walking = false;
}
}
return ret;
}
/*
* set up all widgets in the sink path starting from the source widget
* (DAI type for capture, AIF type for playback).
* The error path in this function ensures that all successfully set up widgets getting freed.
*/
static int sof_set_up_widgets_in_path(struct snd_sof_dev *sdev, struct snd_soc_dapm_widget *widget,
int dir, struct snd_sof_pcm *spcm)
{
struct snd_sof_pcm_stream_pipeline_list *pipeline_list = &spcm->stream[dir].pipeline_list;
struct snd_soc_dapm_widget_list *list = spcm->stream[dir].list;
struct snd_sof_widget *swidget = widget->dobj.private;
struct snd_sof_pipeline *spipe;
struct snd_soc_dapm_path *p;
int ret;
if (is_virtual_widget(sdev, widget, __func__))
return 0;
if (swidget) {
int i;
ret = sof_widget_setup(sdev, widget->dobj.private);
if (ret < 0)
return ret;
/* skip populating the pipe_widgets array if it is NULL */
if (!pipeline_list->pipelines)
goto sink_setup;
/*
* Add the widget's pipe_widget to the list of pipelines to be triggered if not
* already in the list. This will result in the pipelines getting added in the
* order source to sink.
*/
for (i = 0; i < pipeline_list->count; i++) {
spipe = pipeline_list->pipelines[i];
if (spipe == swidget->spipe)
break;
}
if (i == pipeline_list->count) {
pipeline_list->count++;
pipeline_list->pipelines[i] = swidget->spipe;
}
}
sink_setup:
snd_soc_dapm_widget_for_each_sink_path(widget, p) {
if (!p->walking) {
if (!widget_in_list(list, p->sink))
continue;
p->walking = true;
ret = sof_set_up_widgets_in_path(sdev, p->sink, dir, spcm);
p->walking = false;
if (ret < 0) {
if (swidget)
sof_widget_free(sdev, swidget);
return ret;
}
}
}
return 0;
}
static int
sof_walk_widgets_in_order(struct snd_sof_dev *sdev, struct snd_sof_pcm *spcm,
ASoC: SOF: Add a prepare op to IPC topology widget ops In order to set up a pipeline with IPC4, the total memory usage for the pipeline needs to be calculated based on the list of connected widgets. Add a new ipc_prepare() op to struct sof_ipc_tplg_widget_ops that will be used to calculate the memory usage for each widget in the pipelines associated with a PCM and prepare the widget for getting set up in the DSP. The prepare step will be used to allocate memory for the IPC payload, assign instance ID and update the config data for the widget based on the runtime PCM params. Once prepared, the setup step is used to send the IPC to create the widget in the DSP. Add an ipc_unprepare() op to unprepare the widget i.e free the memory allocated during prepare, free the instance ID etc. This should be invoked after the widget is freed. A new flag "prepared" is added to struct snd_sof_widget to track the prepared status of widgets. Also, IPC4 requires the platform_params and the runtime PCM params in order to prepare a widget for set up. So modify the signature of sof_pcm_setup_connected_widgets() and sof_widget_list_setup() to accept these as arguments. Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://lore.kernel.org/r/20220426171743.171061-12-ranjani.sridharan@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-04-26 10:17:43 -07:00
struct snd_pcm_hw_params *fe_params,
struct snd_sof_platform_stream_params *platform_params, int dir,
enum sof_widget_op op)
{
struct snd_soc_dapm_widget_list *list = spcm->stream[dir].list;
struct snd_soc_dapm_widget *widget;
ASoC: SOF: Add a prepare op to IPC topology widget ops In order to set up a pipeline with IPC4, the total memory usage for the pipeline needs to be calculated based on the list of connected widgets. Add a new ipc_prepare() op to struct sof_ipc_tplg_widget_ops that will be used to calculate the memory usage for each widget in the pipelines associated with a PCM and prepare the widget for getting set up in the DSP. The prepare step will be used to allocate memory for the IPC payload, assign instance ID and update the config data for the widget based on the runtime PCM params. Once prepared, the setup step is used to send the IPC to create the widget in the DSP. Add an ipc_unprepare() op to unprepare the widget i.e free the memory allocated during prepare, free the instance ID etc. This should be invoked after the widget is freed. A new flag "prepared" is added to struct snd_sof_widget to track the prepared status of widgets. Also, IPC4 requires the platform_params and the runtime PCM params in order to prepare a widget for set up. So modify the signature of sof_pcm_setup_connected_widgets() and sof_widget_list_setup() to accept these as arguments. Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://lore.kernel.org/r/20220426171743.171061-12-ranjani.sridharan@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-04-26 10:17:43 -07:00
char *str;
int ret = 0;
int i;
if (!list)
return 0;
for_each_dapm_widgets(list, i, widget) {
if (is_virtual_widget(sdev, widget, __func__))
continue;
/* starting widget for playback is AIF type */
if (dir == SNDRV_PCM_STREAM_PLAYBACK && widget->id != snd_soc_dapm_aif_in)
continue;
/* starting widget for capture is DAI type */
if (dir == SNDRV_PCM_STREAM_CAPTURE && widget->id != snd_soc_dapm_dai_out)
continue;
switch (op) {
case SOF_WIDGET_SETUP:
ret = sof_set_up_widgets_in_path(sdev, widget, dir, spcm);
ASoC: SOF: Add a prepare op to IPC topology widget ops In order to set up a pipeline with IPC4, the total memory usage for the pipeline needs to be calculated based on the list of connected widgets. Add a new ipc_prepare() op to struct sof_ipc_tplg_widget_ops that will be used to calculate the memory usage for each widget in the pipelines associated with a PCM and prepare the widget for getting set up in the DSP. The prepare step will be used to allocate memory for the IPC payload, assign instance ID and update the config data for the widget based on the runtime PCM params. Once prepared, the setup step is used to send the IPC to create the widget in the DSP. Add an ipc_unprepare() op to unprepare the widget i.e free the memory allocated during prepare, free the instance ID etc. This should be invoked after the widget is freed. A new flag "prepared" is added to struct snd_sof_widget to track the prepared status of widgets. Also, IPC4 requires the platform_params and the runtime PCM params in order to prepare a widget for set up. So modify the signature of sof_pcm_setup_connected_widgets() and sof_widget_list_setup() to accept these as arguments. Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://lore.kernel.org/r/20220426171743.171061-12-ranjani.sridharan@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-04-26 10:17:43 -07:00
str = "set up";
break;
case SOF_WIDGET_FREE:
ret = sof_free_widgets_in_path(sdev, widget, dir, spcm);
ASoC: SOF: Add a prepare op to IPC topology widget ops In order to set up a pipeline with IPC4, the total memory usage for the pipeline needs to be calculated based on the list of connected widgets. Add a new ipc_prepare() op to struct sof_ipc_tplg_widget_ops that will be used to calculate the memory usage for each widget in the pipelines associated with a PCM and prepare the widget for getting set up in the DSP. The prepare step will be used to allocate memory for the IPC payload, assign instance ID and update the config data for the widget based on the runtime PCM params. Once prepared, the setup step is used to send the IPC to create the widget in the DSP. Add an ipc_unprepare() op to unprepare the widget i.e free the memory allocated during prepare, free the instance ID etc. This should be invoked after the widget is freed. A new flag "prepared" is added to struct snd_sof_widget to track the prepared status of widgets. Also, IPC4 requires the platform_params and the runtime PCM params in order to prepare a widget for set up. So modify the signature of sof_pcm_setup_connected_widgets() and sof_widget_list_setup() to accept these as arguments. Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://lore.kernel.org/r/20220426171743.171061-12-ranjani.sridharan@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-04-26 10:17:43 -07:00
str = "free";
break;
case SOF_WIDGET_PREPARE:
{
struct snd_pcm_hw_params pipeline_params;
str = "prepare";
/*
* When walking the list of connected widgets, the pipeline_params for each
* widget is modified by the source widget in the path. Use a local
* copy of the runtime params as the pipeline_params so that the runtime
* params does not get overwritten.
*/
memcpy(&pipeline_params, fe_params, sizeof(*fe_params));
ret = sof_prepare_widgets_in_path(sdev, widget, fe_params, platform_params,
&pipeline_params, dir, list);
ASoC: SOF: Add a prepare op to IPC topology widget ops In order to set up a pipeline with IPC4, the total memory usage for the pipeline needs to be calculated based on the list of connected widgets. Add a new ipc_prepare() op to struct sof_ipc_tplg_widget_ops that will be used to calculate the memory usage for each widget in the pipelines associated with a PCM and prepare the widget for getting set up in the DSP. The prepare step will be used to allocate memory for the IPC payload, assign instance ID and update the config data for the widget based on the runtime PCM params. Once prepared, the setup step is used to send the IPC to create the widget in the DSP. Add an ipc_unprepare() op to unprepare the widget i.e free the memory allocated during prepare, free the instance ID etc. This should be invoked after the widget is freed. A new flag "prepared" is added to struct snd_sof_widget to track the prepared status of widgets. Also, IPC4 requires the platform_params and the runtime PCM params in order to prepare a widget for set up. So modify the signature of sof_pcm_setup_connected_widgets() and sof_widget_list_setup() to accept these as arguments. Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://lore.kernel.org/r/20220426171743.171061-12-ranjani.sridharan@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-04-26 10:17:43 -07:00
break;
}
case SOF_WIDGET_UNPREPARE:
sof_unprepare_widgets_in_path(sdev, widget, list);
break;
default:
dev_err(sdev->dev, "Invalid widget op %d\n", op);
return -EINVAL;
}
if (ret < 0) {
ASoC: SOF: Add a prepare op to IPC topology widget ops In order to set up a pipeline with IPC4, the total memory usage for the pipeline needs to be calculated based on the list of connected widgets. Add a new ipc_prepare() op to struct sof_ipc_tplg_widget_ops that will be used to calculate the memory usage for each widget in the pipelines associated with a PCM and prepare the widget for getting set up in the DSP. The prepare step will be used to allocate memory for the IPC payload, assign instance ID and update the config data for the widget based on the runtime PCM params. Once prepared, the setup step is used to send the IPC to create the widget in the DSP. Add an ipc_unprepare() op to unprepare the widget i.e free the memory allocated during prepare, free the instance ID etc. This should be invoked after the widget is freed. A new flag "prepared" is added to struct snd_sof_widget to track the prepared status of widgets. Also, IPC4 requires the platform_params and the runtime PCM params in order to prepare a widget for set up. So modify the signature of sof_pcm_setup_connected_widgets() and sof_widget_list_setup() to accept these as arguments. Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://lore.kernel.org/r/20220426171743.171061-12-ranjani.sridharan@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-04-26 10:17:43 -07:00
dev_err(sdev->dev, "Failed to %s connected widgets\n", str);
return ret;
}
}
return 0;
}
ASoC: SOF: Add a prepare op to IPC topology widget ops In order to set up a pipeline with IPC4, the total memory usage for the pipeline needs to be calculated based on the list of connected widgets. Add a new ipc_prepare() op to struct sof_ipc_tplg_widget_ops that will be used to calculate the memory usage for each widget in the pipelines associated with a PCM and prepare the widget for getting set up in the DSP. The prepare step will be used to allocate memory for the IPC payload, assign instance ID and update the config data for the widget based on the runtime PCM params. Once prepared, the setup step is used to send the IPC to create the widget in the DSP. Add an ipc_unprepare() op to unprepare the widget i.e free the memory allocated during prepare, free the instance ID etc. This should be invoked after the widget is freed. A new flag "prepared" is added to struct snd_sof_widget to track the prepared status of widgets. Also, IPC4 requires the platform_params and the runtime PCM params in order to prepare a widget for set up. So modify the signature of sof_pcm_setup_connected_widgets() and sof_widget_list_setup() to accept these as arguments. Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://lore.kernel.org/r/20220426171743.171061-12-ranjani.sridharan@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-04-26 10:17:43 -07:00
int sof_widget_list_setup(struct snd_sof_dev *sdev, struct snd_sof_pcm *spcm,
struct snd_pcm_hw_params *fe_params,
struct snd_sof_platform_stream_params *platform_params,
int dir)
{
const struct sof_ipc_tplg_ops *tplg_ops = sof_ipc_get_ops(sdev, tplg);
struct snd_soc_dapm_widget_list *list = spcm->stream[dir].list;
struct snd_soc_dapm_widget *widget;
int i, ret;
/* nothing to set up */
if (!list)
return 0;
ASoC: SOF: Add a prepare op to IPC topology widget ops In order to set up a pipeline with IPC4, the total memory usage for the pipeline needs to be calculated based on the list of connected widgets. Add a new ipc_prepare() op to struct sof_ipc_tplg_widget_ops that will be used to calculate the memory usage for each widget in the pipelines associated with a PCM and prepare the widget for getting set up in the DSP. The prepare step will be used to allocate memory for the IPC payload, assign instance ID and update the config data for the widget based on the runtime PCM params. Once prepared, the setup step is used to send the IPC to create the widget in the DSP. Add an ipc_unprepare() op to unprepare the widget i.e free the memory allocated during prepare, free the instance ID etc. This should be invoked after the widget is freed. A new flag "prepared" is added to struct snd_sof_widget to track the prepared status of widgets. Also, IPC4 requires the platform_params and the runtime PCM params in order to prepare a widget for set up. So modify the signature of sof_pcm_setup_connected_widgets() and sof_widget_list_setup() to accept these as arguments. Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://lore.kernel.org/r/20220426171743.171061-12-ranjani.sridharan@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-04-26 10:17:43 -07:00
/*
* Prepare widgets for set up. The prepare step is used to allocate memory, assign
* instance ID and pick the widget configuration based on the runtime PCM params.
*/
ret = sof_walk_widgets_in_order(sdev, spcm, fe_params, platform_params,
ASoC: SOF: Add a prepare op to IPC topology widget ops In order to set up a pipeline with IPC4, the total memory usage for the pipeline needs to be calculated based on the list of connected widgets. Add a new ipc_prepare() op to struct sof_ipc_tplg_widget_ops that will be used to calculate the memory usage for each widget in the pipelines associated with a PCM and prepare the widget for getting set up in the DSP. The prepare step will be used to allocate memory for the IPC payload, assign instance ID and update the config data for the widget based on the runtime PCM params. Once prepared, the setup step is used to send the IPC to create the widget in the DSP. Add an ipc_unprepare() op to unprepare the widget i.e free the memory allocated during prepare, free the instance ID etc. This should be invoked after the widget is freed. A new flag "prepared" is added to struct snd_sof_widget to track the prepared status of widgets. Also, IPC4 requires the platform_params and the runtime PCM params in order to prepare a widget for set up. So modify the signature of sof_pcm_setup_connected_widgets() and sof_widget_list_setup() to accept these as arguments. Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://lore.kernel.org/r/20220426171743.171061-12-ranjani.sridharan@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-04-26 10:17:43 -07:00
dir, SOF_WIDGET_PREPARE);
if (ret < 0)
return ret;
ASoC: SOF: Add a prepare op to IPC topology widget ops In order to set up a pipeline with IPC4, the total memory usage for the pipeline needs to be calculated based on the list of connected widgets. Add a new ipc_prepare() op to struct sof_ipc_tplg_widget_ops that will be used to calculate the memory usage for each widget in the pipelines associated with a PCM and prepare the widget for getting set up in the DSP. The prepare step will be used to allocate memory for the IPC payload, assign instance ID and update the config data for the widget based on the runtime PCM params. Once prepared, the setup step is used to send the IPC to create the widget in the DSP. Add an ipc_unprepare() op to unprepare the widget i.e free the memory allocated during prepare, free the instance ID etc. This should be invoked after the widget is freed. A new flag "prepared" is added to struct snd_sof_widget to track the prepared status of widgets. Also, IPC4 requires the platform_params and the runtime PCM params in order to prepare a widget for set up. So modify the signature of sof_pcm_setup_connected_widgets() and sof_widget_list_setup() to accept these as arguments. Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://lore.kernel.org/r/20220426171743.171061-12-ranjani.sridharan@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-04-26 10:17:43 -07:00
/* Set up is used to send the IPC to the DSP to create the widget */
ret = sof_walk_widgets_in_order(sdev, spcm, fe_params, platform_params,
ASoC: SOF: Add a prepare op to IPC topology widget ops In order to set up a pipeline with IPC4, the total memory usage for the pipeline needs to be calculated based on the list of connected widgets. Add a new ipc_prepare() op to struct sof_ipc_tplg_widget_ops that will be used to calculate the memory usage for each widget in the pipelines associated with a PCM and prepare the widget for getting set up in the DSP. The prepare step will be used to allocate memory for the IPC payload, assign instance ID and update the config data for the widget based on the runtime PCM params. Once prepared, the setup step is used to send the IPC to create the widget in the DSP. Add an ipc_unprepare() op to unprepare the widget i.e free the memory allocated during prepare, free the instance ID etc. This should be invoked after the widget is freed. A new flag "prepared" is added to struct snd_sof_widget to track the prepared status of widgets. Also, IPC4 requires the platform_params and the runtime PCM params in order to prepare a widget for set up. So modify the signature of sof_pcm_setup_connected_widgets() and sof_widget_list_setup() to accept these as arguments. Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://lore.kernel.org/r/20220426171743.171061-12-ranjani.sridharan@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-04-26 10:17:43 -07:00
dir, SOF_WIDGET_SETUP);
if (ret < 0) {
sof_walk_widgets_in_order(sdev, spcm, fe_params, platform_params,
dir, SOF_WIDGET_UNPREPARE);
ASoC: SOF: Add a prepare op to IPC topology widget ops In order to set up a pipeline with IPC4, the total memory usage for the pipeline needs to be calculated based on the list of connected widgets. Add a new ipc_prepare() op to struct sof_ipc_tplg_widget_ops that will be used to calculate the memory usage for each widget in the pipelines associated with a PCM and prepare the widget for getting set up in the DSP. The prepare step will be used to allocate memory for the IPC payload, assign instance ID and update the config data for the widget based on the runtime PCM params. Once prepared, the setup step is used to send the IPC to create the widget in the DSP. Add an ipc_unprepare() op to unprepare the widget i.e free the memory allocated during prepare, free the instance ID etc. This should be invoked after the widget is freed. A new flag "prepared" is added to struct snd_sof_widget to track the prepared status of widgets. Also, IPC4 requires the platform_params and the runtime PCM params in order to prepare a widget for set up. So modify the signature of sof_pcm_setup_connected_widgets() and sof_widget_list_setup() to accept these as arguments. Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://lore.kernel.org/r/20220426171743.171061-12-ranjani.sridharan@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-04-26 10:17:43 -07:00
return ret;
}
/*
* error in setting pipeline connections will result in route status being reset for
* routes that were successfully set up when the widgets are freed.
*/
ret = sof_setup_pipeline_connections(sdev, list, dir);
if (ret < 0)
goto widget_free;
/* complete pipelines */
for_each_dapm_widgets(list, i, widget) {
struct snd_sof_widget *swidget = widget->dobj.private;
struct snd_sof_widget *pipe_widget;
struct snd_sof_pipeline *spipe;
if (!swidget || sdev->dspless_mode_selected)
continue;
spipe = swidget->spipe;
if (!spipe) {
dev_err(sdev->dev, "no pipeline found for %s\n",
swidget->widget->name);
ret = -EINVAL;
goto widget_free;
}
pipe_widget = spipe->pipe_widget;
if (!pipe_widget) {
dev_err(sdev->dev, "error: no pipeline widget found for %s\n",
swidget->widget->name);
ret = -EINVAL;
goto widget_free;
}
if (spipe->complete)
continue;
if (tplg_ops && tplg_ops->pipeline_complete) {
spipe->complete = tplg_ops->pipeline_complete(sdev, pipe_widget);
if (spipe->complete < 0) {
ret = spipe->complete;
goto widget_free;
}
}
}
return 0;
widget_free:
sof_walk_widgets_in_order(sdev, spcm, fe_params, platform_params, dir,
ASoC: SOF: Add a prepare op to IPC topology widget ops In order to set up a pipeline with IPC4, the total memory usage for the pipeline needs to be calculated based on the list of connected widgets. Add a new ipc_prepare() op to struct sof_ipc_tplg_widget_ops that will be used to calculate the memory usage for each widget in the pipelines associated with a PCM and prepare the widget for getting set up in the DSP. The prepare step will be used to allocate memory for the IPC payload, assign instance ID and update the config data for the widget based on the runtime PCM params. Once prepared, the setup step is used to send the IPC to create the widget in the DSP. Add an ipc_unprepare() op to unprepare the widget i.e free the memory allocated during prepare, free the instance ID etc. This should be invoked after the widget is freed. A new flag "prepared" is added to struct snd_sof_widget to track the prepared status of widgets. Also, IPC4 requires the platform_params and the runtime PCM params in order to prepare a widget for set up. So modify the signature of sof_pcm_setup_connected_widgets() and sof_widget_list_setup() to accept these as arguments. Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://lore.kernel.org/r/20220426171743.171061-12-ranjani.sridharan@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-04-26 10:17:43 -07:00
SOF_WIDGET_FREE);
sof_walk_widgets_in_order(sdev, spcm, NULL, NULL, dir, SOF_WIDGET_UNPREPARE);
return ret;
}
int sof_widget_list_free(struct snd_sof_dev *sdev, struct snd_sof_pcm *spcm, int dir)
{
struct snd_sof_pcm_stream_pipeline_list *pipeline_list = &spcm->stream[dir].pipeline_list;
struct snd_soc_dapm_widget_list *list = spcm->stream[dir].list;
int ret;
/* nothing to free */
if (!list)
return 0;
ASoC: SOF: Add a prepare op to IPC topology widget ops In order to set up a pipeline with IPC4, the total memory usage for the pipeline needs to be calculated based on the list of connected widgets. Add a new ipc_prepare() op to struct sof_ipc_tplg_widget_ops that will be used to calculate the memory usage for each widget in the pipelines associated with a PCM and prepare the widget for getting set up in the DSP. The prepare step will be used to allocate memory for the IPC payload, assign instance ID and update the config data for the widget based on the runtime PCM params. Once prepared, the setup step is used to send the IPC to create the widget in the DSP. Add an ipc_unprepare() op to unprepare the widget i.e free the memory allocated during prepare, free the instance ID etc. This should be invoked after the widget is freed. A new flag "prepared" is added to struct snd_sof_widget to track the prepared status of widgets. Also, IPC4 requires the platform_params and the runtime PCM params in order to prepare a widget for set up. So modify the signature of sof_pcm_setup_connected_widgets() and sof_widget_list_setup() to accept these as arguments. Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://lore.kernel.org/r/20220426171743.171061-12-ranjani.sridharan@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-04-26 10:17:43 -07:00
/* send IPC to free widget in the DSP */
ret = sof_walk_widgets_in_order(sdev, spcm, NULL, NULL, dir, SOF_WIDGET_FREE);
ASoC: SOF: Add a prepare op to IPC topology widget ops In order to set up a pipeline with IPC4, the total memory usage for the pipeline needs to be calculated based on the list of connected widgets. Add a new ipc_prepare() op to struct sof_ipc_tplg_widget_ops that will be used to calculate the memory usage for each widget in the pipelines associated with a PCM and prepare the widget for getting set up in the DSP. The prepare step will be used to allocate memory for the IPC payload, assign instance ID and update the config data for the widget based on the runtime PCM params. Once prepared, the setup step is used to send the IPC to create the widget in the DSP. Add an ipc_unprepare() op to unprepare the widget i.e free the memory allocated during prepare, free the instance ID etc. This should be invoked after the widget is freed. A new flag "prepared" is added to struct snd_sof_widget to track the prepared status of widgets. Also, IPC4 requires the platform_params and the runtime PCM params in order to prepare a widget for set up. So modify the signature of sof_pcm_setup_connected_widgets() and sof_widget_list_setup() to accept these as arguments. Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://lore.kernel.org/r/20220426171743.171061-12-ranjani.sridharan@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-04-26 10:17:43 -07:00
/* unprepare the widget */
sof_walk_widgets_in_order(sdev, spcm, NULL, NULL, dir, SOF_WIDGET_UNPREPARE);
snd_soc_dapm_dai_free_widgets(&list);
spcm->stream[dir].list = NULL;
pipeline_list->count = 0;
return ret;
}
/*
* helper to determine if there are only D0i3 compatible
* streams active
*/
bool snd_sof_dsp_only_d0i3_compatible_stream_active(struct snd_sof_dev *sdev)
{
struct snd_pcm_substream *substream;
struct snd_sof_pcm *spcm;
bool d0i3_compatible_active = false;
int dir;
list_for_each_entry(spcm, &sdev->pcm_list, list) {
for_each_pcm_streams(dir) {
substream = spcm->stream[dir].substream;
if (!substream || !substream->runtime)
continue;
/*
* substream->runtime being not NULL indicates
* that the stream is open. No need to check the
* stream state.
*/
if (!spcm->stream[dir].d0i3_compatible)
return false;
d0i3_compatible_active = true;
}
}
return d0i3_compatible_active;
}
EXPORT_SYMBOL(snd_sof_dsp_only_d0i3_compatible_stream_active);
bool snd_sof_stream_suspend_ignored(struct snd_sof_dev *sdev)
{
struct snd_sof_pcm *spcm;
list_for_each_entry(spcm, &sdev->pcm_list, list) {
if (spcm->stream[SNDRV_PCM_STREAM_PLAYBACK].suspend_ignored ||
spcm->stream[SNDRV_PCM_STREAM_CAPTURE].suspend_ignored)
return true;
}
return false;
}
/*
* Generic object lookup APIs.
*/
struct snd_sof_pcm *snd_sof_find_spcm_name(struct snd_soc_component *scomp,
const char *name)
{
struct snd_sof_dev *sdev = snd_soc_component_get_drvdata(scomp);
struct snd_sof_pcm *spcm;
list_for_each_entry(spcm, &sdev->pcm_list, list) {
/* match with PCM dai name */
if (strcmp(spcm->pcm.dai_name, name) == 0)
return spcm;
/* match with playback caps name if set */
if (*spcm->pcm.caps[0].name &&
!strcmp(spcm->pcm.caps[0].name, name))
return spcm;
/* match with capture caps name if set */
if (*spcm->pcm.caps[1].name &&
!strcmp(spcm->pcm.caps[1].name, name))
return spcm;
}
return NULL;
}
struct snd_sof_pcm *snd_sof_find_spcm_comp(struct snd_soc_component *scomp,
unsigned int comp_id,
int *direction)
{
struct snd_sof_dev *sdev = snd_soc_component_get_drvdata(scomp);
struct snd_sof_pcm *spcm;
int dir;
list_for_each_entry(spcm, &sdev->pcm_list, list) {
for_each_pcm_streams(dir) {
if (spcm->stream[dir].comp_id == comp_id) {
*direction = dir;
return spcm;
}
}
}
return NULL;
}
struct snd_sof_widget *snd_sof_find_swidget(struct snd_soc_component *scomp,
const char *name)
{
struct snd_sof_dev *sdev = snd_soc_component_get_drvdata(scomp);
struct snd_sof_widget *swidget;
list_for_each_entry(swidget, &sdev->widget_list, list) {
if (strcmp(name, swidget->widget->name) == 0)
return swidget;
}
return NULL;
}
/* find widget by stream name and direction */
struct snd_sof_widget *
snd_sof_find_swidget_sname(struct snd_soc_component *scomp,
const char *pcm_name, int dir)
{
struct snd_sof_dev *sdev = snd_soc_component_get_drvdata(scomp);
struct snd_sof_widget *swidget;
enum snd_soc_dapm_type type;
if (dir == SNDRV_PCM_STREAM_PLAYBACK)
type = snd_soc_dapm_aif_in;
else
type = snd_soc_dapm_aif_out;
list_for_each_entry(swidget, &sdev->widget_list, list) {
if (!strcmp(pcm_name, swidget->widget->sname) &&
swidget->id == type)
return swidget;
}
return NULL;
}
struct snd_sof_dai *snd_sof_find_dai(struct snd_soc_component *scomp,
const char *name)
{
struct snd_sof_dev *sdev = snd_soc_component_get_drvdata(scomp);
struct snd_sof_dai *dai;
list_for_each_entry(dai, &sdev->dai_list, list) {
if (dai->name && (strcmp(name, dai->name) == 0))
return dai;
}
return NULL;
}
static int sof_dai_get_param(struct snd_soc_pcm_runtime *rtd, int param_type)
{
struct snd_soc_component *component =
snd_soc_rtdcom_lookup(rtd, SOF_AUDIO_PCM_DRV_NAME);
struct snd_sof_dai *dai =
snd_sof_find_dai(component, (char *)rtd->dai_link->name);
struct snd_sof_dev *sdev = snd_soc_component_get_drvdata(component);
const struct sof_ipc_tplg_ops *tplg_ops = sof_ipc_get_ops(sdev, tplg);
/* use the tplg configured mclk if existed */
if (!dai)
return 0;
if (tplg_ops && tplg_ops->dai_get_param)
return tplg_ops->dai_get_param(sdev, dai, param_type);
return 0;
}
/*
* Helper to get SSP MCLK from a pcm_runtime.
* Return 0 if not exist.
*/
int sof_dai_get_mclk(struct snd_soc_pcm_runtime *rtd)
{
return sof_dai_get_param(rtd, SOF_DAI_PARAM_INTEL_SSP_MCLK);
}
EXPORT_SYMBOL(sof_dai_get_mclk);
/*
* Helper to get SSP BCLK from a pcm_runtime.
* Return 0 if not exist.
*/
int sof_dai_get_bclk(struct snd_soc_pcm_runtime *rtd)
{
return sof_dai_get_param(rtd, SOF_DAI_PARAM_INTEL_SSP_BCLK);
}
EXPORT_SYMBOL(sof_dai_get_bclk);
/*
* Helper to get SSP TDM slot number from a pcm_runtime.
* Return 0 if not exist.
*/
int sof_dai_get_tdm_slots(struct snd_soc_pcm_runtime *rtd)
{
return sof_dai_get_param(rtd, SOF_DAI_PARAM_INTEL_SSP_TDM_SLOTS);
}
EXPORT_SYMBOL(sof_dai_get_tdm_slots);