linux/lib/tests/Makefile

52 lines
2.4 KiB
Makefile
Raw Permalink Normal View History

# SPDX-License-Identifier: GPL-2.0
#
# Makefile for tests of kernel library functions.
# KUnit tests
CFLAGS_bitfield_kunit.o := $(DISABLE_STRUCTLEAK_PLUGIN)
obj-$(CONFIG_BITFIELD_KUNIT) += bitfield_kunit.o
obj-$(CONFIG_BITS_TEST) += test_bits.o
Networking changes for 6.15. Core & protocols ---------------- - Continue Netlink conversions to per-namespace RTNL lock (IPv4 routing, routing rules, routing next hops, ARP ioctls). - Continue extending the use of netdev instance locks. As a driver opt-in protect queue operations and (in due course) ethtool operations with the instance lock and not RTNL lock. - Support collecting TCP timestamps (data submitted, sent, acked) in BPF, allowing for transparent (to the application) and lower overhead tracking of TCP RPC performance. - Tweak existing networking Rx zero-copy infra to support zero-copy Rx via io_uring. - Optimize MPTCP performance in single subflow mode by 29%. - Enable GRO on packets which went thru XDP CPU redirect (were queued for processing on a different CPU). Improving TCP stream performance up to 2x. - Improve performance of contended connect() by 200% by searching for an available 4-tuple under RCU rather than a spin lock. Bring an additional 229% improvement by tweaking hash distribution. - Avoid unconditionally touching sk_tsflags on RX, improving performance under UDP flood by as much as 10%. - Avoid skb_clone() dance in ping_rcv() to improve performance under ping flood. - Avoid FIB lookup in netfilter if socket is available, 20% perf win. - Rework network device creation (in-kernel) API to more clearly identify network namespaces and their roles. There are up to 4 namespace roles but we used to have just 2 netns pointer arguments, interpreted differently based on context. - Use sysfs_break_active_protection() instead of trylock to avoid deadlocks between unregistering objects and sysfs access. - Add a new sysctl and sockopt for capping max retransmit timeout in TCP. - Support masking port and DSCP in routing rule matches. - Support dumping IPv4 multicast addresses with RTM_GETMULTICAST. - Support specifying at what time packet should be sent on AF_XDP sockets. - Expose TCP ULP diagnostic info (for TLS and MPTCP) to non-admin users. - Add Netlink YAML spec for WiFi (nl80211) and conntrack. - Introduce EXPORT_IPV6_MOD() and EXPORT_IPV6_MOD_GPL() for symbols which only need to be exported when IPv6 support is built as a module. - Age FDB entries based on Rx not Tx traffic in VxLAN, similar to normal bridging. - Allow users to specify source port range for GENEVE tunnels. - netconsole: allow attaching kernel release, CPU ID and task name to messages as metadata Driver API ---------- - Continue rework / fixing of Energy Efficient Ethernet (EEE) across the SW layers. Delegate the responsibilities to phylink where possible. Improve its handling in phylib. - Support symmetric OR-XOR RSS hashing algorithm. - Support tracking and preserving IRQ affinity by NAPI itself. - Support loopback mode speed selection for interface selftests. Device drivers -------------- - Remove the IBM LCS driver for s390. - Remove the sb1000 cable modem driver. - Add support for SFP module access over SMBus. - Add MCTP transport driver for MCTP-over-USB. - Enable XDP metadata support in multiple drivers. - Ethernet high-speed NICs: - Broadcom (bnxt): - add PCIe TLP Processing Hints (TPH) support for new AMD platforms - support dumping RoCE queue state for debug - opt into instance locking - Intel (100G, ice, idpf): - ice: rework MSI-X IRQ management and distribution - ice: support for E830 devices - iavf: add support for Rx timestamping - iavf: opt into instance locking - nVidia/Mellanox: - mlx4: use page pool memory allocator for Rx - mlx5: support for one PTP device per hardware clock - mlx5: support for 200Gbps per-lane link modes - mlx5: move IPSec policy check after decryption - AMD/Solarflare: - support FW flashing via devlink - Cisco (enic): - use page pool memory allocator for Rx - enable 32, 64 byte CQEs - get max rx/tx ring size from the device - Meta (fbnic): - support flow steering and RSS configuration - report queue stats - support TCP segmentation - support IRQ coalescing - support ring size configuration - Marvell/Cavium: - support AF_XDP - Wangxun: - support for PTP clock and timestamping - Huawei (hibmcge): - checksum offload - add more statistics - Ethernet virtual: - VirtIO net: - aggressively suppress Tx completions, improve perf by 96% with 1 CPU and 55% with 2 CPUs - expose NAPI to IRQ mapping and persist NAPI settings - Google (gve): - support XDP in DQO RDA Queue Format - opt into instance locking - Microsoft vNIC: - support BIG TCP - Ethernet NICs consumer, and embedded: - Synopsys (stmmac): - cleanup Tx and Tx clock setting and other link-focused cleanups - enable SGMII and 2500BASEX mode switching for Intel platforms - support Sophgo SG2044 - Broadcom switches (b53): - support for BCM53101 - TI: - iep: add perout configuration support - icssg: support XDP - Cadence (macb): - implement BQL - Xilinx (axinet): - support dynamic IRQ moderation and changing coalescing at runtime - implement BQL - report standard stats - MediaTek: - support phylink managed EEE - Intel: - igc: don't restart the interface on every XDP program change - RealTek (r8169): - support reading registers of internal PHYs directly - increase max jumbo packet size on RTL8125/RTL8126 - Airoha: - support for RISC-V NPU packet processing unit - enable scatter-gather and support MTU up to 9kB - Tehuti (tn40xx): - support cards with TN4010 MAC and an Aquantia AQR105 PHY - Ethernet PHYs: - support for TJA1102S, TJA1121 - dp83tg720: add randomized polling intervals for link detection - dp83822: support changing the transmit amplitude voltage - support for LEDs on 88q2xxx - CAN: - canxl: support Remote Request Substitution bit access - flexcan: add S32G2/S32G3 SoC - WiFi: - remove cooked monitor support - strict mode for better AP testing - basic EPCS support - OMI RX bandwidth reduction support - batman-adv: add support for jumbo frames - WiFi drivers: - RealTek (rtw88): - support RTL8814AE and RTL8814AU - RealTek (rtw89): - switch using wiphy_lock and wiphy_work - add BB context to manipulate two PHY as preparation of MLO - improve BT-coexistence mechanism to play A2DP smoothly - Intel (iwlwifi): - add new iwlmld sub-driver for latest HW/FW combinations - MediaTek (mt76): - preparation for mt7996 Multi-Link Operation (MLO) support - Qualcomm/Atheros (ath12k): - continued work on MLO - Silabs (wfx): - Wake-on-WLAN support - Bluetooth: - add support for skb TX SND/COMPLETION timestamping - hci_core: enable buffer flow control for SCO/eSCO - coredump: log devcd dumps into the monitor - Bluetooth drivers: - intel: add support to configure TX power - nxp: handle bootloader error during cmd5 and cmd7 Signed-off-by: Jakub Kicinski <kuba@kernel.org> -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEE6jPA+I1ugmIBA4hXMUZtbf5SIrsFAmfkLC8ACgkQMUZtbf5S Irsb5g/+L7oKOf0ALbaV9kxFsoz8AymZfAW9i/27F07omGJGpks8oX6j6rQLgIRO OQOFcp7XEdDh1+jh82gHVuPrw2/6lchLtW8ARtzdiQKFr5DRjrsbtua6GRc8iBqA DIRCBFoV2HuMkF39Vr09HMa9AZAT7QR2RLsRGpSq8E8Z8xxKz0X7oujs10PFpMTE IVKhTrVrk+NDot/IU2hzVpnpup+0ld+T2/ZaBklJGcU8uDffImsqNepHRyCG5UC3 xz74Ju23MAj24Gct+og0yFUooF+lUltKyVm0FYCDCY3bASTwgY01NR3kEH/0NQvM cywLzd/ngHm/SMD2ggVAHkjZUieiIVHdaZ53dgjDeBOQoVP6p0dgUK7EumXX8Mx4 8ReR2UiGoYRPaq9c4o+IjG4K027MwVK2p+mF1a6MLa+20XcyMbev8FIRbbHtC/V4 z5/FsOAxcuICWkA1hU9bODrrGzIqemmdRgKG8sGuTJCt/kYGAn72/TCATGNSaCJ0 00n2jN1aepa7wtywHJ5MhVzxN9iQX7+geUHXz0BI+lK4e1Pmk+vjGksymb9ai2fk eQAUV9ekub6q68/J16scD7XeOUM37bTLiMBQeIF8UtZBOJscKiS71zn9QP9Twwxv P2pm01RDZUI+z5ZX3hc12Pm1vjRHaAh9S1JpAw/pTOVlQ+mAJEM= =XY0S -----END PGP SIGNATURE----- Merge tag 'net-next-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core & protocols: - Continue Netlink conversions to per-namespace RTNL lock (IPv4 routing, routing rules, routing next hops, ARP ioctls) - Continue extending the use of netdev instance locks. As a driver opt-in protect queue operations and (in due course) ethtool operations with the instance lock and not RTNL lock. - Support collecting TCP timestamps (data submitted, sent, acked) in BPF, allowing for transparent (to the application) and lower overhead tracking of TCP RPC performance. - Tweak existing networking Rx zero-copy infra to support zero-copy Rx via io_uring. - Optimize MPTCP performance in single subflow mode by 29%. - Enable GRO on packets which went thru XDP CPU redirect (were queued for processing on a different CPU). Improving TCP stream performance up to 2x. - Improve performance of contended connect() by 200% by searching for an available 4-tuple under RCU rather than a spin lock. Bring an additional 229% improvement by tweaking hash distribution. - Avoid unconditionally touching sk_tsflags on RX, improving performance under UDP flood by as much as 10%. - Avoid skb_clone() dance in ping_rcv() to improve performance under ping flood. - Avoid FIB lookup in netfilter if socket is available, 20% perf win. - Rework network device creation (in-kernel) API to more clearly identify network namespaces and their roles. There are up to 4 namespace roles but we used to have just 2 netns pointer arguments, interpreted differently based on context. - Use sysfs_break_active_protection() instead of trylock to avoid deadlocks between unregistering objects and sysfs access. - Add a new sysctl and sockopt for capping max retransmit timeout in TCP. - Support masking port and DSCP in routing rule matches. - Support dumping IPv4 multicast addresses with RTM_GETMULTICAST. - Support specifying at what time packet should be sent on AF_XDP sockets. - Expose TCP ULP diagnostic info (for TLS and MPTCP) to non-admin users. - Add Netlink YAML spec for WiFi (nl80211) and conntrack. - Introduce EXPORT_IPV6_MOD() and EXPORT_IPV6_MOD_GPL() for symbols which only need to be exported when IPv6 support is built as a module. - Age FDB entries based on Rx not Tx traffic in VxLAN, similar to normal bridging. - Allow users to specify source port range for GENEVE tunnels. - netconsole: allow attaching kernel release, CPU ID and task name to messages as metadata Driver API: - Continue rework / fixing of Energy Efficient Ethernet (EEE) across the SW layers. Delegate the responsibilities to phylink where possible. Improve its handling in phylib. - Support symmetric OR-XOR RSS hashing algorithm. - Support tracking and preserving IRQ affinity by NAPI itself. - Support loopback mode speed selection for interface selftests. Device drivers: - Remove the IBM LCS driver for s390 - Remove the sb1000 cable modem driver - Add support for SFP module access over SMBus - Add MCTP transport driver for MCTP-over-USB - Enable XDP metadata support in multiple drivers - Ethernet high-speed NICs: - Broadcom (bnxt): - add PCIe TLP Processing Hints (TPH) support for new AMD platforms - support dumping RoCE queue state for debug - opt into instance locking - Intel (100G, ice, idpf): - ice: rework MSI-X IRQ management and distribution - ice: support for E830 devices - iavf: add support for Rx timestamping - iavf: opt into instance locking - nVidia/Mellanox: - mlx4: use page pool memory allocator for Rx - mlx5: support for one PTP device per hardware clock - mlx5: support for 200Gbps per-lane link modes - mlx5: move IPSec policy check after decryption - AMD/Solarflare: - support FW flashing via devlink - Cisco (enic): - use page pool memory allocator for Rx - enable 32, 64 byte CQEs - get max rx/tx ring size from the device - Meta (fbnic): - support flow steering and RSS configuration - report queue stats - support TCP segmentation - support IRQ coalescing - support ring size configuration - Marvell/Cavium: - support AF_XDP - Wangxun: - support for PTP clock and timestamping - Huawei (hibmcge): - checksum offload - add more statistics - Ethernet virtual: - VirtIO net: - aggressively suppress Tx completions, improve perf by 96% with 1 CPU and 55% with 2 CPUs - expose NAPI to IRQ mapping and persist NAPI settings - Google (gve): - support XDP in DQO RDA Queue Format - opt into instance locking - Microsoft vNIC: - support BIG TCP - Ethernet NICs consumer, and embedded: - Synopsys (stmmac): - cleanup Tx and Tx clock setting and other link-focused cleanups - enable SGMII and 2500BASEX mode switching for Intel platforms - support Sophgo SG2044 - Broadcom switches (b53): - support for BCM53101 - TI: - iep: add perout configuration support - icssg: support XDP - Cadence (macb): - implement BQL - Xilinx (axinet): - support dynamic IRQ moderation and changing coalescing at runtime - implement BQL - report standard stats - MediaTek: - support phylink managed EEE - Intel: - igc: don't restart the interface on every XDP program change - RealTek (r8169): - support reading registers of internal PHYs directly - increase max jumbo packet size on RTL8125/RTL8126 - Airoha: - support for RISC-V NPU packet processing unit - enable scatter-gather and support MTU up to 9kB - Tehuti (tn40xx): - support cards with TN4010 MAC and an Aquantia AQR105 PHY - Ethernet PHYs: - support for TJA1102S, TJA1121 - dp83tg720: add randomized polling intervals for link detection - dp83822: support changing the transmit amplitude voltage - support for LEDs on 88q2xxx - CAN: - canxl: support Remote Request Substitution bit access - flexcan: add S32G2/S32G3 SoC - WiFi: - remove cooked monitor support - strict mode for better AP testing - basic EPCS support - OMI RX bandwidth reduction support - batman-adv: add support for jumbo frames - WiFi drivers: - RealTek (rtw88): - support RTL8814AE and RTL8814AU - RealTek (rtw89): - switch using wiphy_lock and wiphy_work - add BB context to manipulate two PHY as preparation of MLO - improve BT-coexistence mechanism to play A2DP smoothly - Intel (iwlwifi): - add new iwlmld sub-driver for latest HW/FW combinations - MediaTek (mt76): - preparation for mt7996 Multi-Link Operation (MLO) support - Qualcomm/Atheros (ath12k): - continued work on MLO - Silabs (wfx): - Wake-on-WLAN support - Bluetooth: - add support for skb TX SND/COMPLETION timestamping - hci_core: enable buffer flow control for SCO/eSCO - coredump: log devcd dumps into the monitor - Bluetooth drivers: - intel: add support to configure TX power - nxp: handle bootloader error during cmd5 and cmd7" * tag 'net-next-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1681 commits) unix: fix up for "apparmor: add fine grained af_unix mediation" mctp: Fix incorrect tx flow invalidation condition in mctp-i2c net: usb: asix: ax88772: Increase phy_name size net: phy: Introduce PHY_ID_SIZE — minimum size for PHY ID string net: libwx: fix Tx L4 checksum net: libwx: fix Tx descriptor content for some tunnel packets atm: Fix NULL pointer dereference net: tn40xx: add pci-id of the aqr105-based Tehuti TN4010 cards net: tn40xx: prepare tn40xx driver to find phy of the TN9510 card net: tn40xx: create swnode for mdio and aqr105 phy and add to mdiobus net: phy: aquantia: add essential functions to aqr105 driver net: phy: aquantia: search for firmware-name in fwnode net: phy: aquantia: add probe function to aqr105 for firmware loading net: phy: Add swnode support to mdiobus_scan gve: add XDP DROP and PASS support for DQ gve: update XDP allocation path support RX buffer posting gve: merge packet buffer size fields gve: update GQ RX to use buf_size gve: introduce config-based allocation for XDP gve: remove xdp_xsk_done and xdp_xsk_wakeup statistics ...
2025-03-26 21:48:21 -07:00
obj-$(CONFIG_BLACKHOLE_DEV_KUNIT_TEST) += blackhole_dev_kunit.o
obj-$(CONFIG_CHECKSUM_KUNIT) += checksum_kunit.o
obj-$(CONFIG_CMDLINE_KUNIT_TEST) += cmdline_kunit.o
obj-$(CONFIG_CPUMASK_KUNIT_TEST) += cpumask_kunit.o
CFLAGS_fortify_kunit.o += $(call cc-disable-warning, unsequenced)
CFLAGS_fortify_kunit.o += $(call cc-disable-warning, stringop-overread)
CFLAGS_fortify_kunit.o += $(call cc-disable-warning, stringop-truncation)
CFLAGS_fortify_kunit.o += $(DISABLE_STRUCTLEAK_PLUGIN)
obj-$(CONFIG_FORTIFY_KUNIT_TEST) += fortify_kunit.o
CFLAGS_test_fprobe.o += $(CC_FLAGS_FTRACE)
obj-$(CONFIG_FPROBE_SANITY_TEST) += test_fprobe.o
obj-$(CONFIG_HASHTABLE_KUNIT_TEST) += hashtable_test.o
obj-$(CONFIG_HASH_KUNIT_TEST) += test_hash.o
obj-$(CONFIG_TEST_IOV_ITER) += kunit_iov_iter.o
obj-$(CONFIG_IS_SIGNED_TYPE_KUNIT_TEST) += is_signed_type_kunit.o
obj-$(CONFIG_KPROBES_SANITY_TEST) += test_kprobes.o
obj-$(CONFIG_LIST_KUNIT_TEST) += list-test.o
obj-$(CONFIG_KFIFO_KUNIT_TEST) += kfifo_kunit.o
obj-$(CONFIG_TEST_LIST_SORT) += test_list_sort.o
obj-$(CONFIG_LINEAR_RANGES_TEST) += test_linear_ranges.o
linux_kselftest-kunit-6.15-rc1 kunit tool: - Changes to kunit tool to use qboot on QEMU x86_64, and build GDB scripts. - Fixes kunit tool bug in parsing test plan. - Adds test to kunit tool to check parsing late test plan. kunit: - Clarifies kunit_skip() argument name. - Adds Kunit check for the longest symbol length. - Changes qemu_configs for sparc to use Zilog console. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEPZKym/RZuOCGeA/kCwJExA0NQxwFAmfkvDYACgkQCwJExA0N Qxwljg//ZRoF/Jncvlb0vapnOIYywHbJEPRVTKfNurRjhb7stAX7CpLKXing4Gtq ewy3UXRaAZKg1BvugDYWoUsDDD5o7jx6y9rOMOWM+aAHPzYgxY6gbIzyUVolNZg/ 50/ANMhT0bvME8KBB2k2l6p1NAblzOpH3zH35CCDL/40eVodwMPrhq0V5AqccOaE C5Bn+tDiviS6Icw+b/mVUw8fvmoJSTSKvdjaSeRAqThJN3KtqBVyX383++A1zNqy Y6tItu9wG06FDjuQ1miOlSMwhgMEYK4TS4GwbX4PUucR8ETaZNUXVviMRou7vMEa GGOdtsBG3CBgFNtO2VK1qJLWbJesw2G9+w2oIZ2KQKtyfoF7nDMj+DBO2QD/T+GB u2g/xlSDJ5PTzZBMVKENDMy+C9Q+ux8Y2PsQ0fTCdpYgadytKYBFA23EAiZaMdKa d1AweNvFS5gi8WkpS8SyMjs0D5pZnKMgHQqOIfRFjCi0HXsGE9RJfkOjLOzRnaOc zldLAgDcrhtdG8Xin08bux5UuCoqg/e/RJiXF+xQLLJkE7cltN/CuWMrHX4kija+ 8xmJtj4Oe0p7JCwnIaXjLAQDuFfxHYHM9wM0nKm+YpVJLPSWqSXk4+xtQEOlvZhN DJW61ez+pYVCmXuIZ/bgeRzpwXJMfALmI3kn+UtCYwqdTt6Xhp8= =h8xS -----END PGP SIGNATURE----- Merge tag 'linux_kselftest-kunit-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull kunit updates from Shuah Khan: "kunit tool: - Changes to kunit tool to use qboot on QEMU x86_64, and build GDB scripts - Fixes kunit tool bug in parsing test plan - Adds test to kunit tool to check parsing late test plan kunit: - Clarifies kunit_skip() argument name - Adds Kunit check for the longest symbol length - Changes qemu_configs for sparc to use Zilog console" * tag 'linux_kselftest-kunit-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: kunit: tool: add test to check parsing late test plan kunit: tool: Fix bug in parsing test plan Kunit to check the longest symbol length kunit: Clarify kunit_skip() argument name kunit: tool: Build GDB scripts kunit: qemu_configs: sparc: use Zilog console kunit: tool: Use qboot on QEMU x86_64
2025-03-27 19:06:07 -07:00
CFLAGS_longest_symbol_kunit.o += $(call cc-disable-warning, missing-prototypes)
obj-$(CONFIG_LONGEST_SYM_KUNIT_TEST) += longest_symbol_kunit.o
obj-$(CONFIG_MEMCPY_KUNIT_TEST) += memcpy_kunit.o
CFLAGS_overflow_kunit.o = $(call cc-disable-warning, tautological-constant-out-of-range-compare)
obj-$(CONFIG_OVERFLOW_KUNIT_TEST) += overflow_kunit.o
obj-$(CONFIG_PRINTF_KUNIT_TEST) += printf_kunit.o
obj-$(CONFIG_RANDSTRUCT_KUNIT_TEST) += randstruct_kunit.o
obj-$(CONFIG_SCANF_KUNIT_TEST) += scanf_kunit.o
obj-$(CONFIG_SEQ_BUF_KUNIT_TEST) += seq_buf_kunit.o
obj-$(CONFIG_SIPHASH_KUNIT_TEST) += siphash_kunit.o
obj-$(CONFIG_SLUB_KUNIT_TEST) += slub_kunit.o
obj-$(CONFIG_TEST_SORT) += test_sort.o
CFLAGS_stackinit_kunit.o += $(call cc-disable-warning, switch-unreachable)
obj-$(CONFIG_STACKINIT_KUNIT_TEST) += stackinit_kunit.o
obj-$(CONFIG_STRING_KUNIT_TEST) += string_kunit.o
obj-$(CONFIG_STRING_HELPERS_KUNIT_TEST) += string_helpers_kunit.o
obj-$(CONFIG_USERCOPY_KUNIT_TEST) += usercopy_kunit.o
obj-$(CONFIG_UTIL_MACROS_KUNIT) += util_macros_kunit.o
obj-$(CONFIG_RATELIMIT_KUNIT_TEST) += test_ratelimit.o
selftests: add new kallsyms selftests We lack find_symbol() selftests, so add one. This let's us stress test improvements easily on find_symbol() or optimizations. It also inherently allows us to test the limits of kallsyms on Linux today. We test a pathalogical use case for kallsyms by introducing modules which are automatically written for us with a larger number of symbols. We have 4 kallsyms test modules: A: has KALLSYSMS_NUMSYMS exported symbols B: uses one of A's symbols C: adds KALLSYMS_SCALE_FACTOR * KALLSYSMS_NUMSYMS exported D: adds 2 * the symbols than C By using anything much larger than KALLSYSMS_NUMSYMS as 10,000 and KALLSYMS_SCALE_FACTOR of 8 we segfault today. So we're capped at around 160000 symbols somehow today. We can inpsect that issue at our leasure later, but for now the real value to this test is that this will easily allow us to test improvements on find_symbol(). We want to enable this test on allyesmodconfig builds so we can't use this combination, so instead just use a safe value for now and be informative on the Kconfig symbol documentation about where our thresholds are for testers. We default then to KALLSYSMS_NUMSYMS of just 100 and KALLSYMS_SCALE_FACTOR of 8. On x86_64 we can use perf, for other architectures we just use 'time' and allow for customizations. For example a future enhancements could be done for parisc to check for unaligned accesses which triggers a special special exception handler assembler code inside the kernel. The negative impact on performance is so large on parisc that it keeps track of its accesses on /proc/cpuinfo as UAH: IRQ: CPU0 CPU1 3: 1332 0 SuperIO ttyS0 7: 1270013 0 SuperIO pata_ns87415 64: 320023012 320021431 CPU timer 65: 17080507 20624423 CPU IPI UAH: 10948640 58104 Unaligned access handler traps While at it, this tidies up lib/ test modules to allow us to have a new directory for them. The amount of test modules under lib/ is insane. This should also hopefully showcase how to start doing basic self module writing code, which may be more useful for more complex cases later in the future. Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2024-10-21 12:11:44 -07:00
obj-$(CONFIG_TEST_RUNTIME_MODULE) += module/