linux/drivers/pci/endpoint/pci-epf-core.c

// SPDX-License-Identifier: GPL-2.0
/*
 * PCI Endpoint *Function* (EPF) library
 *
 * Copyright (C) 2017 Texas Instruments
 * Author: Kishon Vijay Abraham I <kishon@ti.com>
 */

#include <linux/device.h>
#include <linux/dma-mapping.h>
#include <linux/slab.h>
#include <linux/module.h>

#include <linux/pci-epc.h>
#include <linux/pci-epf.h>
#include <linux/pci-ep-cfs.h>

static DEFINE_MUTEX(pci_epf_mutex);

static const struct bus_type pci_epf_bus_type;
static const struct device_type pci_epf_type;

/**
 * pci_epf_unbind() - Notify the function driver that the binding between the
 *		      EPF device and EPC device has been lost
 * @epf: the EPF device which has lost the binding with the EPC device
 *
 * Invoke to notify the function driver that the binding between the EPF device
 * and EPC device has been lost.
 */
void pci_epf_unbind(struct pci_epf *epf)
{
	struct pci_epf *epf_vf;

	if (!epf->driver) {
		dev_WARN(&epf->dev, "epf device not bound to driver\n");
		return;
	}

	mutex_lock(&epf->lock);
	list_for_each_entry(epf_vf, &epf->pci_vepf, list) {
		if (epf_vf->is_bound)
			epf_vf->driver->ops->unbind(epf_vf);
	}
	if (epf->is_bound)
		epf->driver->ops->unbind(epf);
	mutex_unlock(&epf->lock);
	module_put(epf->driver->owner);
}
EXPORT_SYMBOL_GPL(pci_epf_unbind);

/**
 * pci_epf_bind() - Notify the function driver that the EPF device has been
 *		    bound to a EPC device
 * @epf: the EPF device which has been bound to the EPC device
 *
 * Invoke to notify the function driver that it has been bound to a EPC device
 */
int pci_epf_bind(struct pci_epf *epf)
{
	struct device *dev = &epf->dev;
	struct pci_epf *epf_vf;
	u8 func_no, vfunc_no;
	struct pci_epc *epc;
	int ret;

	if (!epf->driver) {
		dev_WARN(dev, "epf device not bound to driver\n");
		return -EINVAL;
	}

	if (!try_module_get(epf->driver->owner))
		return -EAGAIN;

	mutex_lock(&epf->lock);
	list_for_each_entry(epf_vf, &epf->pci_vepf, list) {
		vfunc_no = epf_vf->vfunc_no;

		if (vfunc_no < 1) {
			dev_err(dev, "Invalid virtual function number\n");
			ret = -EINVAL;
			goto ret;
		}

		epc = epf->epc;
		func_no = epf->func_no;
		if (!IS_ERR_OR_NULL(epc)) {
			if (!epc->max_vfs) {
				dev_err(dev, "No support for virt function\n");
				ret = -EINVAL;
				goto ret;
			}

			if (vfunc_no > epc->max_vfs[func_no]) {
				dev_err(dev, "PF%d: Exceeds max vfunc number\n",
					func_no);
				ret = -EINVAL;
				goto ret;
			}
		}

		epc = epf->sec_epc;
		func_no = epf->sec_epc_func_no;
		if (!IS_ERR_OR_NULL(epc)) {
			if (!epc->max_vfs) {
				dev_err(dev, "No support for virt function\n");
				ret = -EINVAL;
				goto ret;
			}

			if (vfunc_no > epc->max_vfs[func_no]) {
				dev_err(dev, "PF%d: Exceeds max vfunc number\n",
					func_no);
				ret = -EINVAL;
				goto ret;
			}
		}

		epf_vf->func_no = epf->func_no;
		epf_vf->sec_epc_func_no = epf->sec_epc_func_no;
		epf_vf->epc = epf->epc;
		epf_vf->sec_epc = epf->sec_epc;
		ret = epf_vf->driver->ops->bind(epf_vf);
		if (ret)
			goto ret;
		epf_vf->is_bound = true;
	}

	ret = epf->driver->ops->bind(epf);
	if (ret)
		goto ret;
	epf->is_bound = true;

	mutex_unlock(&epf->lock);
	return 0;

ret:
	mutex_unlock(&epf->lock);
	pci_epf_unbind(epf);

	return ret;
}
EXPORT_SYMBOL_GPL(pci_epf_bind);

/**
 * pci_epf_add_vepf() - associate virtual EP function to physical EP function
 * @epf_pf: the physical EP function to which the virtual EP function should be
 *   associated
 * @epf_vf: the virtual EP function to be added
 *
 * A physical endpoint function can be associated with multiple virtual
 * endpoint functions. Invoke pci_epf_add_epf() to add a virtual PCI endpoint
 * function to a physical PCI endpoint function.
 */
int pci_epf_add_vepf(struct pci_epf *epf_pf, struct pci_epf *epf_vf)
{
	u32 vfunc_no;

	if (IS_ERR_OR_NULL(epf_pf) || IS_ERR_OR_NULL(epf_vf))
		return -EINVAL;

	if (epf_pf->epc || epf_vf->epc || epf_vf->epf_pf)
		return -EBUSY;

	if (epf_pf->sec_epc || epf_vf->sec_epc)
		return -EBUSY;

	mutex_lock(&epf_pf->lock);
	vfunc_no = find_first_zero_bit(&epf_pf->vfunction_num_map,
				       BITS_PER_LONG);
	if (vfunc_no >= BITS_PER_LONG) {
		mutex_unlock(&epf_pf->lock);
		return -EINVAL;
	}

	set_bit(vfunc_no, &epf_pf->vfunction_num_map);
	epf_vf->vfunc_no = vfunc_no;

	epf_vf->epf_pf = epf_pf;
	epf_vf->is_vf = true;

	list_add_tail(&epf_vf->list, &epf_pf->pci_vepf);
	mutex_unlock(&epf_pf->lock);

	return 0;
}
EXPORT_SYMBOL_GPL(pci_epf_add_vepf);

/**
 * pci_epf_remove_vepf() - remove virtual EP function from physical EP function
 * @epf_pf: the physical EP function from which the virtual EP function should
 *   be removed
 * @epf_vf: the virtual EP function to be removed
 *
 * Invoke to remove a virtual endpoint function from the physical endpoint
 * function.
 */
void pci_epf_remove_vepf(struct pci_epf *epf_pf, struct pci_epf *epf_vf)
{
	if (IS_ERR_OR_NULL(epf_pf) || IS_ERR_OR_NULL(epf_vf))
		return;

	mutex_lock(&epf_pf->lock);
	clear_bit(epf_vf->vfunc_no, &epf_pf->vfunction_num_map);
	epf_vf->epf_pf = NULL;
	list_del(&epf_vf->list);
	mutex_unlock(&epf_pf->lock);
}
EXPORT_SYMBOL_GPL(pci_epf_remove_vepf);

/**
 * pci_epf_free_space() - free the allocated PCI EPF register space
 * @epf: the EPF device from whom to free the memory
 * @addr: the virtual address of the PCI EPF register space
 * @bar: the BAR number corresponding to the register space
 * @type: Identifies if the allocated space is for primary EPC or secondary EPC
 *
 * Invoke to free the allocated PCI EPF register space.
 */
void pci_epf_free_space(struct pci_epf *epf, void *addr, enum pci_barno bar,
			enum pci_epc_interface_type type)
{
	struct device *dev;
	struct pci_epf_bar *epf_bar;
	struct pci_epc *epc;

	if (!addr)
		return;

	if (type == PRIMARY_INTERFACE) {
		epc = epf->epc;
		epf_bar = epf->bar;
	} else {
		epc = epf->sec_epc;
		epf_bar = epf->sec_epc_bar;
	}

	dev = epc->dev.parent;
	dma_free_coherent(dev, epf_bar[bar].aligned_size, addr,
			  epf_bar[bar].phys_addr);

	epf_bar[bar].phys_addr = 0;
	epf_bar[bar].addr = NULL;
	epf_bar[bar].size = 0;
	epf_bar[bar].aligned_size = 0;
	epf_bar[bar].barno = 0;
	epf_bar[bar].flags = 0;
}
EXPORT_SYMBOL_GPL(pci_epf_free_space);

/**
 * pci_epf_alloc_space() - allocate memory for the PCI EPF register space
 * @epf: the EPF device to whom allocate the memory
 * @size: the size of the memory that has to be allocated
 * @bar: the BAR number corresponding to the allocated register space
 * @epc_features: the features provided by the EPC specific to this EPF
 * @type: Identifies if the allocation is for primary EPC or secondary EPC
 *
 * Invoke to allocate memory for the PCI EPF register space.
 * Flag PCI_BASE_ADDRESS_MEM_TYPE_64 will automatically get set if the BAR
 * can only be a 64-bit BAR, or if the requested size is larger than 2 GB.
 */
void *pci_epf_alloc_space(struct pci_epf *epf, size_t size, enum pci_barno bar,
			  const struct pci_epc_features *epc_features,
			  enum pci_epc_interface_type type)
{
	u64 bar_fixed_size = epc_features->bar[bar].fixed_size;
	size_t aligned_size, align = epc_features->align;
	struct pci_epf_bar *epf_bar;
	dma_addr_t phys_addr;
	struct pci_epc *epc;
	struct device *dev;
	void *space;

	if (size < 128)
		size = 128;

	/* According to PCIe base spec, min size for a resizable BAR is 1 MB. */
	if (epc_features->bar[bar].type == BAR_RESIZABLE && size < SZ_1M)
		size = SZ_1M;

	if (epc_features->bar[bar].type == BAR_FIXED && bar_fixed_size) {
		if (size > bar_fixed_size) {
			dev_err(&epf->dev,
				"requested BAR size is larger than fixed size\n");
			return NULL;
		}
		size = bar_fixed_size;
	} else {
		/* BAR size must be power of two */
		size = roundup_pow_of_two(size);
	}

	/*
	 * Allocate enough memory to accommodate the iATU alignment
	 * requirement.  In most cases, this will be the same as .size but
	 * it might be different if, for example, the fixed size of a BAR
	 * is smaller than align.
	 */
	aligned_size = align ? ALIGN(size, align) : size;

	if (type == PRIMARY_INTERFACE) {
		epc = epf->epc;
		epf_bar = epf->bar;
	} else {
		epc = epf->sec_epc;
		epf_bar = epf->sec_epc_bar;
	}

	dev = epc->dev.parent;
	space = dma_alloc_coherent(dev, aligned_size, &phys_addr, GFP_KERNEL);
	if (!space) {
		dev_err(dev, "failed to allocate mem space\n");
		return NULL;
	}

	epf_bar[bar].phys_addr = phys_addr;
	epf_bar[bar].addr = space;
	epf_bar[bar].size = size;
	epf_bar[bar].aligned_size = aligned_size;
	epf_bar[bar].barno = bar;
	if (upper_32_bits(size) || epc_features->bar[bar].only_64bit)
		epf_bar[bar].flags |= PCI_BASE_ADDRESS_MEM_TYPE_64;
	else
		epf_bar[bar].flags |= PCI_BASE_ADDRESS_MEM_TYPE_32;

	return space;
}
EXPORT_SYMBOL_GPL(pci_epf_alloc_space);

static void pci_epf_remove_cfs(struct pci_epf_driver *driver)
{
	struct config_group *group, *tmp;

	if (!IS_ENABLED(CONFIG_PCI_ENDPOINT_CONFIGFS))
		return;

	mutex_lock(&pci_epf_mutex);
	list_for_each_entry_safe(group, tmp, &driver->epf_group, group_entry)
		pci_ep_cfs_remove_epf_group(group);
	WARN_ON(!list_empty(&driver->epf_group));
	mutex_unlock(&pci_epf_mutex);
}

/**
 * pci_epf_unregister_driver() - unregister the PCI EPF driver
 * @driver: the PCI EPF driver that has to be unregistered
 *
 * Invoke to unregister the PCI EPF driver.
 */
void pci_epf_unregister_driver(struct pci_epf_driver *driver)
{
	pci_epf_remove_cfs(driver);
	driver_unregister(&driver->driver);
}
EXPORT_SYMBOL_GPL(pci_epf_unregister_driver);

static int pci_epf_add_cfs(struct pci_epf_driver *driver)
{
	struct config_group *group;
	const struct pci_epf_device_id *id;

	if (!IS_ENABLED(CONFIG_PCI_ENDPOINT_CONFIGFS))
		return 0;

	INIT_LIST_HEAD(&driver->epf_group);

	id = driver->id_table;
	while (id->name[0]) {
		group = pci_ep_cfs_add_epf_group(id->name);
		if (IS_ERR(group)) {
			pci_epf_remove_cfs(driver);
			return PTR_ERR(group);
		}

		mutex_lock(&pci_epf_mutex);
		list_add_tail(&group->group_entry, &driver->epf_group);
		mutex_unlock(&pci_epf_mutex);
		id++;
	}

	return 0;
}

/**
 * __pci_epf_register_driver() - register a new PCI EPF driver
 * @driver: structure representing PCI EPF driver
 * @owner: the owner of the module that registers the PCI EPF driver
 *
 * Invoke to register a new PCI EPF driver.
 */
int __pci_epf_register_driver(struct pci_epf_driver *driver,
			      struct module *owner)
{
	int ret;

	if (!driver->ops)
		return -EINVAL;

	if (!driver->ops->bind || !driver->ops->unbind)
		return -EINVAL;

	driver->driver.bus = &pci_epf_bus_type;
	driver->driver.owner = owner;

	ret = driver_register(&driver->driver);
	if (ret)
		return ret;

	pci_epf_add_cfs(driver);

	return 0;
}
EXPORT_SYMBOL_GPL(__pci_epf_register_driver);

/**
 * pci_epf_destroy() - destroy the created PCI EPF device
 * @epf: the PCI EPF device that has to be destroyed.
 *
 * Invoke to destroy the PCI EPF device created by invoking pci_epf_create().
 */
void pci_epf_destroy(struct pci_epf *epf)
{
	device_unregister(&epf->dev);
}
EXPORT_SYMBOL_GPL(pci_epf_destroy);

/**
 * pci_epf_create() - create a new PCI EPF device
 * @name: the name of the PCI EPF device. This name will be used to bind the
 *	  EPF device to a EPF driver
 *
 * Invoke to create a new PCI EPF device by providing the name of the function
 * device.
 */
struct pci_epf *pci_epf_create(const char *name)
{
	int ret;
	struct pci_epf *epf;
	struct device *dev;
	int len;

	epf = kzalloc(sizeof(*epf), GFP_KERNEL);
	if (!epf)
		return ERR_PTR(-ENOMEM);

	len = strchrnul(name, '.') - name;
	epf->name = kstrndup(name, len, GFP_KERNEL);
	if (!epf->name) {
		kfree(epf);
		return ERR_PTR(-ENOMEM);
	}

	/* VFs are numbered starting with 1. So set BIT(0) by default */
	epf->vfunction_num_map = 1;
	INIT_LIST_HEAD(&epf->pci_vepf);

	dev = &epf->dev;
	device_initialize(dev);
	dev->bus = &pci_epf_bus_type;
	dev->type = &pci_epf_type;
	mutex_init(&epf->lock);

	ret = dev_set_name(dev, "%s", name);
	if (ret) {
		put_device(dev);
		return ERR_PTR(ret);
	}

	ret = device_add(dev);
	if (ret) {
		put_device(dev);
		return ERR_PTR(ret);
	}

	return epf;
}
EXPORT_SYMBOL_GPL(pci_epf_create);

/**
 * pci_epf_align_inbound_addr() - Align the given address based on the BAR
 *				  alignment requirement
 * @epf: the EPF device
 * @addr: inbound address to be aligned
 * @bar: the BAR number corresponding to the given addr
 * @base: base address matching the @bar alignment requirement
 * @off: offset to be added to the @base address
 *
 * Helper function to align input @addr based on BAR's alignment requirement.
 * The aligned base address and offset are returned via @base and @off.
 *
 * NOTE: The pci_epf_alloc_space() function already accounts for alignment.
 * This API is primarily intended for use with other memory regions not
 * allocated by pci_epf_alloc_space(), such as peripheral register spaces or
 * the message address of a platform MSI controller.
 *
 * Return: 0 on success, errno otherwise.
 */
int pci_epf_align_inbound_addr(struct pci_epf *epf, enum pci_barno bar,
			       u64 addr, dma_addr_t *base, size_t *off)
{
	/*
	 * Most EP controllers require the BAR start address to be aligned to
	 * the BAR size, because they mask off the lower bits.
	 *
	 * Alignment to BAR size also works for controllers that support
	 * unaligned addresses.
	 */
	u64 align = epf->bar[bar].size;

	*base = round_down(addr, align);
	*off = addr & (align - 1);

	return 0;
}
EXPORT_SYMBOL_GPL(pci_epf_align_inbound_addr);

static void pci_epf_dev_release(struct device *dev)
{
	struct pci_epf *epf = to_pci_epf(dev);

	kfree(epf->name);
	kfree(epf);
}

static const struct device_type pci_epf_type = {
	.release	= pci_epf_dev_release,
};

static const struct pci_epf_device_id *
pci_epf_match_id(const struct pci_epf_device_id *id, const struct pci_epf *epf)
{
	while (id->name[0]) {
		if (strcmp(epf->name, id->name) == 0)
			return id;
		id++;
	}

	return NULL;
}

static int pci_epf_device_match(struct device *dev, const struct device_driver *drv)
{
	struct pci_epf *epf = to_pci_epf(dev);
	const struct pci_epf_driver *driver = to_pci_epf_driver(drv);

	if (driver->id_table)
		return !!pci_epf_match_id(driver->id_table, epf);

	return !strcmp(epf->name, drv->name);
}

static int pci_epf_device_probe(struct device *dev)
{
	struct pci_epf *epf = to_pci_epf(dev);
	struct pci_epf_driver *driver = to_pci_epf_driver(dev->driver);

	if (!driver->probe)
		return -ENODEV;

	epf->driver = driver;

	return driver->probe(epf, pci_epf_match_id(driver->id_table, epf));
}

static void pci_epf_device_remove(struct device *dev)
{
	struct pci_epf *epf = to_pci_epf(dev);
	struct pci_epf_driver *driver = to_pci_epf_driver(dev->driver);

	if (driver->remove)
		driver->remove(epf);
	epf->driver = NULL;
}

static const struct bus_type pci_epf_bus_type = {
	.name		= "pci-epf",
	.match		= pci_epf_device_match,
	.probe		= pci_epf_device_probe,
	.remove		= pci_epf_device_remove,
};

static int __init pci_epf_init(void)
{
	int ret;

	ret = bus_register(&pci_epf_bus_type);
	if (ret) {
		pr_err("failed to register pci epf bus --> %d\n", ret);
		return ret;
	}

	return 0;
}
module_init(pci_epf_init);

static void __exit pci_epf_exit(void)
{
	bus_unregister(&pci_epf_bus_type);
}
module_exit(pci_epf_exit);

MODULE_DESCRIPTION("PCI EPF Library");
MODULE_AUTHOR("Kishon Vijay Abraham I <kishon@ti.com>");