linux/drivers/net/wireless/intel/iwlwifi/mld/tests/utils.h

141 lines
4.3 KiB
C
Raw Permalink Normal View History

wifi: iwlwifi: add iwlmld sub-driver iwlwifi is the driver of all Intel wifi devices since 2008. Since then, the hardware has changed a lot, but the firmware API has changed even more. The need to keep one driver that supports all those different APIs led us to introduce a new architecture circa 2012 which allowed us to keep the same interface to the hardware (DMAs, Tx queues, etc...) with a new layer to implement the mid-layer between mac80211 and the firmware. The first component is called the 'transport' and the latter is called 'operation_mode' a.k.a op_mode. In 2013 we took advantage of the new architecture to introduce iwlmvm which allowed us to implement the, then, new firmware API. This op_mode supports 7260 and up, those devices supports support at least VHT. Since then, wifi evolved and so did the firmware. It became much bigger and took a lot of functionality from the driver. It became increasingly hard to keep the same op_mode for the newest devices and we experienced frequent regressions on older devices. In order to avoid those regressions and keep the code maintainable, we decided it was about time to start a new op_mode. iwlmld is a new op_mode that supports BE200 or newer if the firmware being used is 97.ucode or newer. If the user has an older devices or BE200 with .96.ucode, iwlmvm will be loaded. Of course, this op_mode selection is seamless. All the features supported in iwlmvm are supported in iwlmld besides a few seldom used use cases: injection and Hotspot 2.0. Those are under work. A few points about the implementation: * iwlmld doesn't have any mutexes, it relies on the wiphy_lock * iwlmld is more "resource oriented": stations, links and interfaces are allocated and freed only after all the relevant flows are completed. * Firmware notifications' sizes are validated in a more structured way. We would love to see this new op_mode merged in 6.15. The firmware for this new driver (.97.ucode) is not yet publicly available but it'll be sent very soon. People eager to get an early version of this firmware can contact Emmanuel at: emmanuel.grumbach@intel.com I've listed the people who directly contributed code, but many others from various teams have contributed in other ways. Co-developed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Co-developed-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Avraham Stern <avraham.stern@intel.com> Co-developed-by: Daniel Gabay <daniel.gabay@intel.com> Signed-off-by: Daniel Gabay <daniel.gabay@intel.com> Co-developed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Co-developed-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com> Signed-off-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com> Co-developed-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com> Signed-off-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com> Co-developed-by: Benjamin Berg <benjamin.berg@intel.com> Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Co-developed-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://lore.kernel.org/linux-wireless/20250216094321.537988-1-miriam.rachel.korenblit@intel.com/ [fix Kconfig, fix api/phy.h includes, SPDX tag and coding style issues, duplicated includes per 0-day robot] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-02-16 11:42:40 +02:00
/* SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause */
/*
* Copyright (C) 2024-2025 Intel Corporation
*/
#ifndef __iwl_mld_kunit_utils_h__
#define __iwl_mld_kunit_utils_h__
#include <net/mac80211.h>
#include <kunit/test-bug.h>
struct iwl_mld;
int iwlmld_kunit_test_init(struct kunit *test);
struct iwl_mld_kunit_link {
const struct cfg80211_chan_def *chandef;
u8 id;
};
wifi: iwlwifi: add iwlmld sub-driver iwlwifi is the driver of all Intel wifi devices since 2008. Since then, the hardware has changed a lot, but the firmware API has changed even more. The need to keep one driver that supports all those different APIs led us to introduce a new architecture circa 2012 which allowed us to keep the same interface to the hardware (DMAs, Tx queues, etc...) with a new layer to implement the mid-layer between mac80211 and the firmware. The first component is called the 'transport' and the latter is called 'operation_mode' a.k.a op_mode. In 2013 we took advantage of the new architecture to introduce iwlmvm which allowed us to implement the, then, new firmware API. This op_mode supports 7260 and up, those devices supports support at least VHT. Since then, wifi evolved and so did the firmware. It became much bigger and took a lot of functionality from the driver. It became increasingly hard to keep the same op_mode for the newest devices and we experienced frequent regressions on older devices. In order to avoid those regressions and keep the code maintainable, we decided it was about time to start a new op_mode. iwlmld is a new op_mode that supports BE200 or newer if the firmware being used is 97.ucode or newer. If the user has an older devices or BE200 with .96.ucode, iwlmvm will be loaded. Of course, this op_mode selection is seamless. All the features supported in iwlmvm are supported in iwlmld besides a few seldom used use cases: injection and Hotspot 2.0. Those are under work. A few points about the implementation: * iwlmld doesn't have any mutexes, it relies on the wiphy_lock * iwlmld is more "resource oriented": stations, links and interfaces are allocated and freed only after all the relevant flows are completed. * Firmware notifications' sizes are validated in a more structured way. We would love to see this new op_mode merged in 6.15. The firmware for this new driver (.97.ucode) is not yet publicly available but it'll be sent very soon. People eager to get an early version of this firmware can contact Emmanuel at: emmanuel.grumbach@intel.com I've listed the people who directly contributed code, but many others from various teams have contributed in other ways. Co-developed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Co-developed-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Avraham Stern <avraham.stern@intel.com> Co-developed-by: Daniel Gabay <daniel.gabay@intel.com> Signed-off-by: Daniel Gabay <daniel.gabay@intel.com> Co-developed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Co-developed-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com> Signed-off-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com> Co-developed-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com> Signed-off-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com> Co-developed-by: Benjamin Berg <benjamin.berg@intel.com> Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Co-developed-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://lore.kernel.org/linux-wireless/20250216094321.537988-1-miriam.rachel.korenblit@intel.com/ [fix Kconfig, fix api/phy.h includes, SPDX tag and coding style issues, duplicated includes per 0-day robot] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-02-16 11:42:40 +02:00
enum nl80211_iftype;
struct ieee80211_vif *iwlmld_kunit_add_vif(bool mlo, enum nl80211_iftype type);
struct ieee80211_bss_conf *
iwlmld_kunit_add_link(struct ieee80211_vif *vif, int link_id);
#define KUNIT_ALLOC_AND_ASSERT_SIZE(test, ptr, size) \
do { \
(ptr) = kunit_kzalloc((test), (size), GFP_KERNEL); \
KUNIT_ASSERT_NOT_NULL((test), (ptr)); \
} while (0)
#define KUNIT_ALLOC_AND_ASSERT(test, ptr) \
KUNIT_ALLOC_AND_ASSERT_SIZE(test, ptr, sizeof(*(ptr)))
#define CHANNEL(_name, _band, _freq) \
static struct ieee80211_channel _name = { \
.band = (_band), \
.center_freq = (_freq), \
.hw_value = (_freq), \
}
CHANNEL(chan_2ghz, NL80211_BAND_2GHZ, 2412);
CHANNEL(chan_2ghz_11, NL80211_BAND_2GHZ, 2462);
wifi: iwlwifi: add iwlmld sub-driver iwlwifi is the driver of all Intel wifi devices since 2008. Since then, the hardware has changed a lot, but the firmware API has changed even more. The need to keep one driver that supports all those different APIs led us to introduce a new architecture circa 2012 which allowed us to keep the same interface to the hardware (DMAs, Tx queues, etc...) with a new layer to implement the mid-layer between mac80211 and the firmware. The first component is called the 'transport' and the latter is called 'operation_mode' a.k.a op_mode. In 2013 we took advantage of the new architecture to introduce iwlmvm which allowed us to implement the, then, new firmware API. This op_mode supports 7260 and up, those devices supports support at least VHT. Since then, wifi evolved and so did the firmware. It became much bigger and took a lot of functionality from the driver. It became increasingly hard to keep the same op_mode for the newest devices and we experienced frequent regressions on older devices. In order to avoid those regressions and keep the code maintainable, we decided it was about time to start a new op_mode. iwlmld is a new op_mode that supports BE200 or newer if the firmware being used is 97.ucode or newer. If the user has an older devices or BE200 with .96.ucode, iwlmvm will be loaded. Of course, this op_mode selection is seamless. All the features supported in iwlmvm are supported in iwlmld besides a few seldom used use cases: injection and Hotspot 2.0. Those are under work. A few points about the implementation: * iwlmld doesn't have any mutexes, it relies on the wiphy_lock * iwlmld is more "resource oriented": stations, links and interfaces are allocated and freed only after all the relevant flows are completed. * Firmware notifications' sizes are validated in a more structured way. We would love to see this new op_mode merged in 6.15. The firmware for this new driver (.97.ucode) is not yet publicly available but it'll be sent very soon. People eager to get an early version of this firmware can contact Emmanuel at: emmanuel.grumbach@intel.com I've listed the people who directly contributed code, but many others from various teams have contributed in other ways. Co-developed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Co-developed-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Avraham Stern <avraham.stern@intel.com> Co-developed-by: Daniel Gabay <daniel.gabay@intel.com> Signed-off-by: Daniel Gabay <daniel.gabay@intel.com> Co-developed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Co-developed-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com> Signed-off-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com> Co-developed-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com> Signed-off-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com> Co-developed-by: Benjamin Berg <benjamin.berg@intel.com> Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Co-developed-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://lore.kernel.org/linux-wireless/20250216094321.537988-1-miriam.rachel.korenblit@intel.com/ [fix Kconfig, fix api/phy.h includes, SPDX tag and coding style issues, duplicated includes per 0-day robot] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-02-16 11:42:40 +02:00
CHANNEL(chan_5ghz, NL80211_BAND_5GHZ, 5200);
CHANNEL(chan_5ghz_120, NL80211_BAND_5GHZ, 5600);
wifi: iwlwifi: add iwlmld sub-driver iwlwifi is the driver of all Intel wifi devices since 2008. Since then, the hardware has changed a lot, but the firmware API has changed even more. The need to keep one driver that supports all those different APIs led us to introduce a new architecture circa 2012 which allowed us to keep the same interface to the hardware (DMAs, Tx queues, etc...) with a new layer to implement the mid-layer between mac80211 and the firmware. The first component is called the 'transport' and the latter is called 'operation_mode' a.k.a op_mode. In 2013 we took advantage of the new architecture to introduce iwlmvm which allowed us to implement the, then, new firmware API. This op_mode supports 7260 and up, those devices supports support at least VHT. Since then, wifi evolved and so did the firmware. It became much bigger and took a lot of functionality from the driver. It became increasingly hard to keep the same op_mode for the newest devices and we experienced frequent regressions on older devices. In order to avoid those regressions and keep the code maintainable, we decided it was about time to start a new op_mode. iwlmld is a new op_mode that supports BE200 or newer if the firmware being used is 97.ucode or newer. If the user has an older devices or BE200 with .96.ucode, iwlmvm will be loaded. Of course, this op_mode selection is seamless. All the features supported in iwlmvm are supported in iwlmld besides a few seldom used use cases: injection and Hotspot 2.0. Those are under work. A few points about the implementation: * iwlmld doesn't have any mutexes, it relies on the wiphy_lock * iwlmld is more "resource oriented": stations, links and interfaces are allocated and freed only after all the relevant flows are completed. * Firmware notifications' sizes are validated in a more structured way. We would love to see this new op_mode merged in 6.15. The firmware for this new driver (.97.ucode) is not yet publicly available but it'll be sent very soon. People eager to get an early version of this firmware can contact Emmanuel at: emmanuel.grumbach@intel.com I've listed the people who directly contributed code, but many others from various teams have contributed in other ways. Co-developed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Co-developed-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Avraham Stern <avraham.stern@intel.com> Co-developed-by: Daniel Gabay <daniel.gabay@intel.com> Signed-off-by: Daniel Gabay <daniel.gabay@intel.com> Co-developed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Co-developed-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com> Signed-off-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com> Co-developed-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com> Signed-off-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com> Co-developed-by: Benjamin Berg <benjamin.berg@intel.com> Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Co-developed-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://lore.kernel.org/linux-wireless/20250216094321.537988-1-miriam.rachel.korenblit@intel.com/ [fix Kconfig, fix api/phy.h includes, SPDX tag and coding style issues, duplicated includes per 0-day robot] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-02-16 11:42:40 +02:00
CHANNEL(chan_6ghz, NL80211_BAND_6GHZ, 6115);
CHANNEL(chan_6ghz_221, NL80211_BAND_6GHZ, 7055);
wifi: iwlwifi: add iwlmld sub-driver iwlwifi is the driver of all Intel wifi devices since 2008. Since then, the hardware has changed a lot, but the firmware API has changed even more. The need to keep one driver that supports all those different APIs led us to introduce a new architecture circa 2012 which allowed us to keep the same interface to the hardware (DMAs, Tx queues, etc...) with a new layer to implement the mid-layer between mac80211 and the firmware. The first component is called the 'transport' and the latter is called 'operation_mode' a.k.a op_mode. In 2013 we took advantage of the new architecture to introduce iwlmvm which allowed us to implement the, then, new firmware API. This op_mode supports 7260 and up, those devices supports support at least VHT. Since then, wifi evolved and so did the firmware. It became much bigger and took a lot of functionality from the driver. It became increasingly hard to keep the same op_mode for the newest devices and we experienced frequent regressions on older devices. In order to avoid those regressions and keep the code maintainable, we decided it was about time to start a new op_mode. iwlmld is a new op_mode that supports BE200 or newer if the firmware being used is 97.ucode or newer. If the user has an older devices or BE200 with .96.ucode, iwlmvm will be loaded. Of course, this op_mode selection is seamless. All the features supported in iwlmvm are supported in iwlmld besides a few seldom used use cases: injection and Hotspot 2.0. Those are under work. A few points about the implementation: * iwlmld doesn't have any mutexes, it relies on the wiphy_lock * iwlmld is more "resource oriented": stations, links and interfaces are allocated and freed only after all the relevant flows are completed. * Firmware notifications' sizes are validated in a more structured way. We would love to see this new op_mode merged in 6.15. The firmware for this new driver (.97.ucode) is not yet publicly available but it'll be sent very soon. People eager to get an early version of this firmware can contact Emmanuel at: emmanuel.grumbach@intel.com I've listed the people who directly contributed code, but many others from various teams have contributed in other ways. Co-developed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Co-developed-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Avraham Stern <avraham.stern@intel.com> Co-developed-by: Daniel Gabay <daniel.gabay@intel.com> Signed-off-by: Daniel Gabay <daniel.gabay@intel.com> Co-developed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Co-developed-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com> Signed-off-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com> Co-developed-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com> Signed-off-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com> Co-developed-by: Benjamin Berg <benjamin.berg@intel.com> Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Co-developed-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://lore.kernel.org/linux-wireless/20250216094321.537988-1-miriam.rachel.korenblit@intel.com/ [fix Kconfig, fix api/phy.h includes, SPDX tag and coding style issues, duplicated includes per 0-day robot] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-02-16 11:42:40 +02:00
/* Feel free to add more */
#undef CHANNEL
#define CHANDEF_LIST \
CHANDEF(chandef_2ghz_20mhz, chan_2ghz, 2412, \
NL80211_CHAN_WIDTH_20) \
CHANDEF(chandef_2ghz_40mhz, chan_2ghz, 2422, \
NL80211_CHAN_WIDTH_40) \
CHANDEF(chandef_2ghz_11_20mhz, chan_2ghz_11, 2462, \
NL80211_CHAN_WIDTH_20) \
CHANDEF(chandef_5ghz_20mhz, chan_5ghz, 5200, \
NL80211_CHAN_WIDTH_20) \
CHANDEF(chandef_5ghz_40mhz, chan_5ghz, 5210, \
NL80211_CHAN_WIDTH_40) \
CHANDEF(chandef_5ghz_80mhz, chan_5ghz, 5210, \
NL80211_CHAN_WIDTH_80) \
CHANDEF(chandef_5ghz_160mhz, chan_5ghz, 5250, \
NL80211_CHAN_WIDTH_160) \
CHANDEF(chandef_5ghz_120_40mhz, chan_5ghz_120, 5610, \
NL80211_CHAN_WIDTH_40) \
CHANDEF(chandef_6ghz_20mhz, chan_6ghz, 6115, \
NL80211_CHAN_WIDTH_20) \
CHANDEF(chandef_6ghz_40mhz, chan_6ghz, 6125, \
NL80211_CHAN_WIDTH_40) \
CHANDEF(chandef_6ghz_80mhz, chan_6ghz, 6145, \
NL80211_CHAN_WIDTH_80) \
CHANDEF(chandef_6ghz_160mhz, chan_6ghz, 6185, \
NL80211_CHAN_WIDTH_160) \
CHANDEF(chandef_6ghz_320mhz, chan_6ghz, 6105, \
NL80211_CHAN_WIDTH_320) \
CHANDEF(chandef_6ghz_221_160mhz, chan_6ghz_221, 6985, \
NL80211_CHAN_WIDTH_160) \
/* Feel free to add more */
wifi: iwlwifi: add iwlmld sub-driver iwlwifi is the driver of all Intel wifi devices since 2008. Since then, the hardware has changed a lot, but the firmware API has changed even more. The need to keep one driver that supports all those different APIs led us to introduce a new architecture circa 2012 which allowed us to keep the same interface to the hardware (DMAs, Tx queues, etc...) with a new layer to implement the mid-layer between mac80211 and the firmware. The first component is called the 'transport' and the latter is called 'operation_mode' a.k.a op_mode. In 2013 we took advantage of the new architecture to introduce iwlmvm which allowed us to implement the, then, new firmware API. This op_mode supports 7260 and up, those devices supports support at least VHT. Since then, wifi evolved and so did the firmware. It became much bigger and took a lot of functionality from the driver. It became increasingly hard to keep the same op_mode for the newest devices and we experienced frequent regressions on older devices. In order to avoid those regressions and keep the code maintainable, we decided it was about time to start a new op_mode. iwlmld is a new op_mode that supports BE200 or newer if the firmware being used is 97.ucode or newer. If the user has an older devices or BE200 with .96.ucode, iwlmvm will be loaded. Of course, this op_mode selection is seamless. All the features supported in iwlmvm are supported in iwlmld besides a few seldom used use cases: injection and Hotspot 2.0. Those are under work. A few points about the implementation: * iwlmld doesn't have any mutexes, it relies on the wiphy_lock * iwlmld is more "resource oriented": stations, links and interfaces are allocated and freed only after all the relevant flows are completed. * Firmware notifications' sizes are validated in a more structured way. We would love to see this new op_mode merged in 6.15. The firmware for this new driver (.97.ucode) is not yet publicly available but it'll be sent very soon. People eager to get an early version of this firmware can contact Emmanuel at: emmanuel.grumbach@intel.com I've listed the people who directly contributed code, but many others from various teams have contributed in other ways. Co-developed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Co-developed-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Avraham Stern <avraham.stern@intel.com> Co-developed-by: Daniel Gabay <daniel.gabay@intel.com> Signed-off-by: Daniel Gabay <daniel.gabay@intel.com> Co-developed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Co-developed-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com> Signed-off-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com> Co-developed-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com> Signed-off-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com> Co-developed-by: Benjamin Berg <benjamin.berg@intel.com> Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Co-developed-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://lore.kernel.org/linux-wireless/20250216094321.537988-1-miriam.rachel.korenblit@intel.com/ [fix Kconfig, fix api/phy.h includes, SPDX tag and coding style issues, duplicated includes per 0-day robot] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-02-16 11:42:40 +02:00
#define CHANDEF(_name, _channel, _freq1, _width) \
__maybe_unused static const struct cfg80211_chan_def _name = { \
.chan = &(_channel), \
.center_freq1 = (_freq1), \
.width = (_width), \
};
CHANDEF_LIST
#undef CHANDEF
wifi: iwlwifi: add iwlmld sub-driver iwlwifi is the driver of all Intel wifi devices since 2008. Since then, the hardware has changed a lot, but the firmware API has changed even more. The need to keep one driver that supports all those different APIs led us to introduce a new architecture circa 2012 which allowed us to keep the same interface to the hardware (DMAs, Tx queues, etc...) with a new layer to implement the mid-layer between mac80211 and the firmware. The first component is called the 'transport' and the latter is called 'operation_mode' a.k.a op_mode. In 2013 we took advantage of the new architecture to introduce iwlmvm which allowed us to implement the, then, new firmware API. This op_mode supports 7260 and up, those devices supports support at least VHT. Since then, wifi evolved and so did the firmware. It became much bigger and took a lot of functionality from the driver. It became increasingly hard to keep the same op_mode for the newest devices and we experienced frequent regressions on older devices. In order to avoid those regressions and keep the code maintainable, we decided it was about time to start a new op_mode. iwlmld is a new op_mode that supports BE200 or newer if the firmware being used is 97.ucode or newer. If the user has an older devices or BE200 with .96.ucode, iwlmvm will be loaded. Of course, this op_mode selection is seamless. All the features supported in iwlmvm are supported in iwlmld besides a few seldom used use cases: injection and Hotspot 2.0. Those are under work. A few points about the implementation: * iwlmld doesn't have any mutexes, it relies on the wiphy_lock * iwlmld is more "resource oriented": stations, links and interfaces are allocated and freed only after all the relevant flows are completed. * Firmware notifications' sizes are validated in a more structured way. We would love to see this new op_mode merged in 6.15. The firmware for this new driver (.97.ucode) is not yet publicly available but it'll be sent very soon. People eager to get an early version of this firmware can contact Emmanuel at: emmanuel.grumbach@intel.com I've listed the people who directly contributed code, but many others from various teams have contributed in other ways. Co-developed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Co-developed-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Avraham Stern <avraham.stern@intel.com> Co-developed-by: Daniel Gabay <daniel.gabay@intel.com> Signed-off-by: Daniel Gabay <daniel.gabay@intel.com> Co-developed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Co-developed-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com> Signed-off-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com> Co-developed-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com> Signed-off-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com> Co-developed-by: Benjamin Berg <benjamin.berg@intel.com> Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Co-developed-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://lore.kernel.org/linux-wireless/20250216094321.537988-1-miriam.rachel.korenblit@intel.com/ [fix Kconfig, fix api/phy.h includes, SPDX tag and coding style issues, duplicated includes per 0-day robot] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-02-16 11:42:40 +02:00
struct ieee80211_chanctx_conf *
iwlmld_kunit_add_chanctx(const struct cfg80211_chan_def *def);
wifi: iwlwifi: add iwlmld sub-driver iwlwifi is the driver of all Intel wifi devices since 2008. Since then, the hardware has changed a lot, but the firmware API has changed even more. The need to keep one driver that supports all those different APIs led us to introduce a new architecture circa 2012 which allowed us to keep the same interface to the hardware (DMAs, Tx queues, etc...) with a new layer to implement the mid-layer between mac80211 and the firmware. The first component is called the 'transport' and the latter is called 'operation_mode' a.k.a op_mode. In 2013 we took advantage of the new architecture to introduce iwlmvm which allowed us to implement the, then, new firmware API. This op_mode supports 7260 and up, those devices supports support at least VHT. Since then, wifi evolved and so did the firmware. It became much bigger and took a lot of functionality from the driver. It became increasingly hard to keep the same op_mode for the newest devices and we experienced frequent regressions on older devices. In order to avoid those regressions and keep the code maintainable, we decided it was about time to start a new op_mode. iwlmld is a new op_mode that supports BE200 or newer if the firmware being used is 97.ucode or newer. If the user has an older devices or BE200 with .96.ucode, iwlmvm will be loaded. Of course, this op_mode selection is seamless. All the features supported in iwlmvm are supported in iwlmld besides a few seldom used use cases: injection and Hotspot 2.0. Those are under work. A few points about the implementation: * iwlmld doesn't have any mutexes, it relies on the wiphy_lock * iwlmld is more "resource oriented": stations, links and interfaces are allocated and freed only after all the relevant flows are completed. * Firmware notifications' sizes are validated in a more structured way. We would love to see this new op_mode merged in 6.15. The firmware for this new driver (.97.ucode) is not yet publicly available but it'll be sent very soon. People eager to get an early version of this firmware can contact Emmanuel at: emmanuel.grumbach@intel.com I've listed the people who directly contributed code, but many others from various teams have contributed in other ways. Co-developed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Co-developed-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Avraham Stern <avraham.stern@intel.com> Co-developed-by: Daniel Gabay <daniel.gabay@intel.com> Signed-off-by: Daniel Gabay <daniel.gabay@intel.com> Co-developed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Co-developed-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com> Signed-off-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com> Co-developed-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com> Signed-off-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com> Co-developed-by: Benjamin Berg <benjamin.berg@intel.com> Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Co-developed-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://lore.kernel.org/linux-wireless/20250216094321.537988-1-miriam.rachel.korenblit@intel.com/ [fix Kconfig, fix api/phy.h includes, SPDX tag and coding style issues, duplicated includes per 0-day robot] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-02-16 11:42:40 +02:00
void iwlmld_kunit_assign_chanctx_to_link(struct ieee80211_vif *vif,
struct ieee80211_bss_conf *link,
struct ieee80211_chanctx_conf *ctx);
/* Allocate a sta, initialize it and move it to the wanted state */
struct ieee80211_sta *iwlmld_kunit_setup_sta(struct ieee80211_vif *vif,
enum ieee80211_sta_state state,
int link_id);
struct ieee80211_vif *
iwlmld_kunit_setup_mlo_assoc(u16 valid_links,
struct iwl_mld_kunit_link *assoc_link);
struct ieee80211_vif *
iwlmld_kunit_setup_non_mlo_assoc(struct iwl_mld_kunit_link *assoc_link);
wifi: iwlwifi: add iwlmld sub-driver iwlwifi is the driver of all Intel wifi devices since 2008. Since then, the hardware has changed a lot, but the firmware API has changed even more. The need to keep one driver that supports all those different APIs led us to introduce a new architecture circa 2012 which allowed us to keep the same interface to the hardware (DMAs, Tx queues, etc...) with a new layer to implement the mid-layer between mac80211 and the firmware. The first component is called the 'transport' and the latter is called 'operation_mode' a.k.a op_mode. In 2013 we took advantage of the new architecture to introduce iwlmvm which allowed us to implement the, then, new firmware API. This op_mode supports 7260 and up, those devices supports support at least VHT. Since then, wifi evolved and so did the firmware. It became much bigger and took a lot of functionality from the driver. It became increasingly hard to keep the same op_mode for the newest devices and we experienced frequent regressions on older devices. In order to avoid those regressions and keep the code maintainable, we decided it was about time to start a new op_mode. iwlmld is a new op_mode that supports BE200 or newer if the firmware being used is 97.ucode or newer. If the user has an older devices or BE200 with .96.ucode, iwlmvm will be loaded. Of course, this op_mode selection is seamless. All the features supported in iwlmvm are supported in iwlmld besides a few seldom used use cases: injection and Hotspot 2.0. Those are under work. A few points about the implementation: * iwlmld doesn't have any mutexes, it relies on the wiphy_lock * iwlmld is more "resource oriented": stations, links and interfaces are allocated and freed only after all the relevant flows are completed. * Firmware notifications' sizes are validated in a more structured way. We would love to see this new op_mode merged in 6.15. The firmware for this new driver (.97.ucode) is not yet publicly available but it'll be sent very soon. People eager to get an early version of this firmware can contact Emmanuel at: emmanuel.grumbach@intel.com I've listed the people who directly contributed code, but many others from various teams have contributed in other ways. Co-developed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Co-developed-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Avraham Stern <avraham.stern@intel.com> Co-developed-by: Daniel Gabay <daniel.gabay@intel.com> Signed-off-by: Daniel Gabay <daniel.gabay@intel.com> Co-developed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Co-developed-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com> Signed-off-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com> Co-developed-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com> Signed-off-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com> Co-developed-by: Benjamin Berg <benjamin.berg@intel.com> Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Co-developed-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://lore.kernel.org/linux-wireless/20250216094321.537988-1-miriam.rachel.korenblit@intel.com/ [fix Kconfig, fix api/phy.h includes, SPDX tag and coding style issues, duplicated includes per 0-day robot] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-02-16 11:42:40 +02:00
struct iwl_rx_packet *
_iwl_mld_kunit_create_pkt(const void *notif, size_t notif_sz);
#define iwl_mld_kunit_create_pkt(_notif) \
_iwl_mld_kunit_create_pkt(&(_notif), sizeof(_notif))
struct ieee80211_vif *
iwlmld_kunit_assoc_emlsr(struct iwl_mld_kunit_link *link1,
struct iwl_mld_kunit_link *link2);
wifi: iwlwifi: add iwlmld sub-driver iwlwifi is the driver of all Intel wifi devices since 2008. Since then, the hardware has changed a lot, but the firmware API has changed even more. The need to keep one driver that supports all those different APIs led us to introduce a new architecture circa 2012 which allowed us to keep the same interface to the hardware (DMAs, Tx queues, etc...) with a new layer to implement the mid-layer between mac80211 and the firmware. The first component is called the 'transport' and the latter is called 'operation_mode' a.k.a op_mode. In 2013 we took advantage of the new architecture to introduce iwlmvm which allowed us to implement the, then, new firmware API. This op_mode supports 7260 and up, those devices supports support at least VHT. Since then, wifi evolved and so did the firmware. It became much bigger and took a lot of functionality from the driver. It became increasingly hard to keep the same op_mode for the newest devices and we experienced frequent regressions on older devices. In order to avoid those regressions and keep the code maintainable, we decided it was about time to start a new op_mode. iwlmld is a new op_mode that supports BE200 or newer if the firmware being used is 97.ucode or newer. If the user has an older devices or BE200 with .96.ucode, iwlmvm will be loaded. Of course, this op_mode selection is seamless. All the features supported in iwlmvm are supported in iwlmld besides a few seldom used use cases: injection and Hotspot 2.0. Those are under work. A few points about the implementation: * iwlmld doesn't have any mutexes, it relies on the wiphy_lock * iwlmld is more "resource oriented": stations, links and interfaces are allocated and freed only after all the relevant flows are completed. * Firmware notifications' sizes are validated in a more structured way. We would love to see this new op_mode merged in 6.15. The firmware for this new driver (.97.ucode) is not yet publicly available but it'll be sent very soon. People eager to get an early version of this firmware can contact Emmanuel at: emmanuel.grumbach@intel.com I've listed the people who directly contributed code, but many others from various teams have contributed in other ways. Co-developed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Co-developed-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Avraham Stern <avraham.stern@intel.com> Co-developed-by: Daniel Gabay <daniel.gabay@intel.com> Signed-off-by: Daniel Gabay <daniel.gabay@intel.com> Co-developed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Co-developed-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com> Signed-off-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com> Co-developed-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com> Signed-off-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com> Co-developed-by: Benjamin Berg <benjamin.berg@intel.com> Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Co-developed-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://lore.kernel.org/linux-wireless/20250216094321.537988-1-miriam.rachel.korenblit@intel.com/ [fix Kconfig, fix api/phy.h includes, SPDX tag and coding style issues, duplicated includes per 0-day robot] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-02-16 11:42:40 +02:00
struct element *iwlmld_kunit_gen_element(u8 id, const void *data, size_t len);
/**
* iwlmld_kunit_get_phy_of_link - Get the phy of a link
*
* @vif: The vif to get the phy from.
* @link_id: The id of the link to get the phy for.
*
* given a vif and link id, return the phy pointer of that link.
* This assumes that the link exists, and that it had a chanctx
* assigned.
* If this is not the case, the test will fail.
*
* Return: phy pointer.
*/
struct iwl_mld_phy *iwlmld_kunit_get_phy_of_link(struct ieee80211_vif *vif,
u8 link_id);
#endif /* __iwl_mld_kunit_utils_h__ */