linux/drivers/net/wireless/intel/iwlwifi/mld/scan.h

174 lines
5.3 KiB
C
Raw Permalink Normal View History

wifi: iwlwifi: add iwlmld sub-driver iwlwifi is the driver of all Intel wifi devices since 2008. Since then, the hardware has changed a lot, but the firmware API has changed even more. The need to keep one driver that supports all those different APIs led us to introduce a new architecture circa 2012 which allowed us to keep the same interface to the hardware (DMAs, Tx queues, etc...) with a new layer to implement the mid-layer between mac80211 and the firmware. The first component is called the 'transport' and the latter is called 'operation_mode' a.k.a op_mode. In 2013 we took advantage of the new architecture to introduce iwlmvm which allowed us to implement the, then, new firmware API. This op_mode supports 7260 and up, those devices supports support at least VHT. Since then, wifi evolved and so did the firmware. It became much bigger and took a lot of functionality from the driver. It became increasingly hard to keep the same op_mode for the newest devices and we experienced frequent regressions on older devices. In order to avoid those regressions and keep the code maintainable, we decided it was about time to start a new op_mode. iwlmld is a new op_mode that supports BE200 or newer if the firmware being used is 97.ucode or newer. If the user has an older devices or BE200 with .96.ucode, iwlmvm will be loaded. Of course, this op_mode selection is seamless. All the features supported in iwlmvm are supported in iwlmld besides a few seldom used use cases: injection and Hotspot 2.0. Those are under work. A few points about the implementation: * iwlmld doesn't have any mutexes, it relies on the wiphy_lock * iwlmld is more "resource oriented": stations, links and interfaces are allocated and freed only after all the relevant flows are completed. * Firmware notifications' sizes are validated in a more structured way. We would love to see this new op_mode merged in 6.15. The firmware for this new driver (.97.ucode) is not yet publicly available but it'll be sent very soon. People eager to get an early version of this firmware can contact Emmanuel at: emmanuel.grumbach@intel.com I've listed the people who directly contributed code, but many others from various teams have contributed in other ways. Co-developed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Co-developed-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Avraham Stern <avraham.stern@intel.com> Co-developed-by: Daniel Gabay <daniel.gabay@intel.com> Signed-off-by: Daniel Gabay <daniel.gabay@intel.com> Co-developed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Co-developed-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com> Signed-off-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com> Co-developed-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com> Signed-off-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com> Co-developed-by: Benjamin Berg <benjamin.berg@intel.com> Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Co-developed-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://lore.kernel.org/linux-wireless/20250216094321.537988-1-miriam.rachel.korenblit@intel.com/ [fix Kconfig, fix api/phy.h includes, SPDX tag and coding style issues, duplicated includes per 0-day robot] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-02-16 11:42:40 +02:00
/* SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause */
/*
* Copyright (C) 2024-2025 Intel Corporation
*/
#ifndef __iwl_mld_scan_h__
#define __iwl_mld_scan_h__
int iwl_mld_alloc_scan_cmd(struct iwl_mld *mld);
int iwl_mld_regular_scan_start(struct iwl_mld *mld, struct ieee80211_vif *vif,
struct cfg80211_scan_request *req,
struct ieee80211_scan_ies *ies);
void iwl_mld_int_mlo_scan(struct iwl_mld *mld, struct ieee80211_vif *vif);
void iwl_mld_handle_scan_iter_complete_notif(struct iwl_mld *mld,
struct iwl_rx_packet *pkt);
int iwl_mld_scan_stop(struct iwl_mld *mld, int type, bool notify);
int iwl_mld_sched_scan_start(struct iwl_mld *mld,
struct ieee80211_vif *vif,
struct cfg80211_sched_scan_request *req,
struct ieee80211_scan_ies *ies,
int type);
void iwl_mld_handle_match_found_notif(struct iwl_mld *mld,
struct iwl_rx_packet *pkt);
void iwl_mld_handle_scan_complete_notif(struct iwl_mld *mld,
struct iwl_rx_packet *pkt);
int iwl_mld_mac80211_get_survey(struct ieee80211_hw *hw, int idx,
struct survey_info *survey);
void iwl_mld_handle_channel_survey_notif(struct iwl_mld *mld,
struct iwl_rx_packet *pkt);
wifi: iwlwifi: add iwlmld sub-driver iwlwifi is the driver of all Intel wifi devices since 2008. Since then, the hardware has changed a lot, but the firmware API has changed even more. The need to keep one driver that supports all those different APIs led us to introduce a new architecture circa 2012 which allowed us to keep the same interface to the hardware (DMAs, Tx queues, etc...) with a new layer to implement the mid-layer between mac80211 and the firmware. The first component is called the 'transport' and the latter is called 'operation_mode' a.k.a op_mode. In 2013 we took advantage of the new architecture to introduce iwlmvm which allowed us to implement the, then, new firmware API. This op_mode supports 7260 and up, those devices supports support at least VHT. Since then, wifi evolved and so did the firmware. It became much bigger and took a lot of functionality from the driver. It became increasingly hard to keep the same op_mode for the newest devices and we experienced frequent regressions on older devices. In order to avoid those regressions and keep the code maintainable, we decided it was about time to start a new op_mode. iwlmld is a new op_mode that supports BE200 or newer if the firmware being used is 97.ucode or newer. If the user has an older devices or BE200 with .96.ucode, iwlmvm will be loaded. Of course, this op_mode selection is seamless. All the features supported in iwlmvm are supported in iwlmld besides a few seldom used use cases: injection and Hotspot 2.0. Those are under work. A few points about the implementation: * iwlmld doesn't have any mutexes, it relies on the wiphy_lock * iwlmld is more "resource oriented": stations, links and interfaces are allocated and freed only after all the relevant flows are completed. * Firmware notifications' sizes are validated in a more structured way. We would love to see this new op_mode merged in 6.15. The firmware for this new driver (.97.ucode) is not yet publicly available but it'll be sent very soon. People eager to get an early version of this firmware can contact Emmanuel at: emmanuel.grumbach@intel.com I've listed the people who directly contributed code, but many others from various teams have contributed in other ways. Co-developed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Co-developed-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Avraham Stern <avraham.stern@intel.com> Co-developed-by: Daniel Gabay <daniel.gabay@intel.com> Signed-off-by: Daniel Gabay <daniel.gabay@intel.com> Co-developed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Co-developed-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com> Signed-off-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com> Co-developed-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com> Signed-off-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com> Co-developed-by: Benjamin Berg <benjamin.berg@intel.com> Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Co-developed-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://lore.kernel.org/linux-wireless/20250216094321.537988-1-miriam.rachel.korenblit@intel.com/ [fix Kconfig, fix api/phy.h includes, SPDX tag and coding style issues, duplicated includes per 0-day robot] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-02-16 11:42:40 +02:00
#define WFA_TPC_IE_LEN 9
static inline int iwl_mld_scan_max_template_size(void)
{
#define MAC_HDR_LEN 24
#define DS_IE_LEN 3
#define SSID_IE_LEN 2
/* driver create the 802.11 header, WFA TPC IE, DS parameter and SSID IE */
#define DRIVER_TOTAL_IES_LEN \
(MAC_HDR_LEN + WFA_TPC_IE_LEN + DS_IE_LEN + SSID_IE_LEN)
BUILD_BUG_ON(SCAN_OFFLOAD_PROBE_REQ_SIZE < DRIVER_TOTAL_IES_LEN);
return SCAN_OFFLOAD_PROBE_REQ_SIZE - DRIVER_TOTAL_IES_LEN;
}
void iwl_mld_report_scan_aborted(struct iwl_mld *mld);
enum iwl_mld_scan_status {
IWL_MLD_SCAN_NONE = 0,
IWL_MLD_SCAN_REGULAR = BIT(0),
IWL_MLD_SCAN_SCHED = BIT(1),
IWL_MLD_SCAN_NETDETECT = BIT(2),
IWL_MLD_SCAN_INT_MLO = BIT(3),
};
/* enum iwl_mld_pass_all_sched_results_states - Defines the states for
* handling/passing scheduled scan results to mac80211
* @SCHED_SCAN_PASS_ALL_STATE_DISABLED: Don't pass all scan results, only when
* a match found.
* @SCHED_SCAN_PASS_ALL_STATE_ENABLED: Pass all scan results is enabled
* (no filtering).
* @SCHED_SCAN_PASS_ALL_STATE_FOUND: A scan result is found, pass it on the
* next scan iteration complete notification.
*/
enum iwl_mld_pass_all_sched_results_states {
SCHED_SCAN_PASS_ALL_STATE_DISABLED,
SCHED_SCAN_PASS_ALL_STATE_ENABLED,
SCHED_SCAN_PASS_ALL_STATE_FOUND,
};
/**
* enum iwl_mld_traffic_load - Levels of traffic load
*
* @IWL_MLD_TRAFFIC_LOW: low traffic load
* @IWL_MLD_TRAFFIC_MEDIUM: medium traffic load
* @IWL_MLD_TRAFFIC_HIGH: high traffic load
*/
enum iwl_mld_traffic_load {
IWL_MLD_TRAFFIC_LOW,
IWL_MLD_TRAFFIC_MEDIUM,
IWL_MLD_TRAFFIC_HIGH,
};
/**
* struct iwl_mld_scan - Scan data
* @status: scan status, a combination of %enum iwl_mld_scan_status,
* reflects the %scan.uid_status array.
* @uid_status: array to track the scan status per uid.
* @start_tsf: start time of last scan in TSF of the link that requested
* the scan.
* @last_ebs_failed: true if the last EBS (Energy Based Scan) failed.
* @pass_all_sched_res: see %enum iwl_mld_pass_all_sched_results_states.
* @fw_link_id: the current (regular) scan fw link id, used by scan
* complete notif.
* @traffic_load: traffic load related data
* @traffic_load.last_stats_ts_usec: The timestamp of the last statistics
* notification, used to calculate the elapsed time between two
* notifications and determine the traffic load
* @traffic_load.status: The current traffic load status, see
* &enum iwl_mld_traffic_load
* @cmd_size: size of %cmd.
* @cmd: pointer to scan cmd buffer (allocated once in op mode start).
* @last_6ghz_passive_jiffies: stores the last 6GHz passive scan time
* in jiffies.
* @last_start_time_jiffies: stores the last start time in jiffies
* (interface up/reset/resume).
* @last_mlo_scan_time: start time of the last MLO scan in nanoseconds since
* boot.
wifi: iwlwifi: add iwlmld sub-driver iwlwifi is the driver of all Intel wifi devices since 2008. Since then, the hardware has changed a lot, but the firmware API has changed even more. The need to keep one driver that supports all those different APIs led us to introduce a new architecture circa 2012 which allowed us to keep the same interface to the hardware (DMAs, Tx queues, etc...) with a new layer to implement the mid-layer between mac80211 and the firmware. The first component is called the 'transport' and the latter is called 'operation_mode' a.k.a op_mode. In 2013 we took advantage of the new architecture to introduce iwlmvm which allowed us to implement the, then, new firmware API. This op_mode supports 7260 and up, those devices supports support at least VHT. Since then, wifi evolved and so did the firmware. It became much bigger and took a lot of functionality from the driver. It became increasingly hard to keep the same op_mode for the newest devices and we experienced frequent regressions on older devices. In order to avoid those regressions and keep the code maintainable, we decided it was about time to start a new op_mode. iwlmld is a new op_mode that supports BE200 or newer if the firmware being used is 97.ucode or newer. If the user has an older devices or BE200 with .96.ucode, iwlmvm will be loaded. Of course, this op_mode selection is seamless. All the features supported in iwlmvm are supported in iwlmld besides a few seldom used use cases: injection and Hotspot 2.0. Those are under work. A few points about the implementation: * iwlmld doesn't have any mutexes, it relies on the wiphy_lock * iwlmld is more "resource oriented": stations, links and interfaces are allocated and freed only after all the relevant flows are completed. * Firmware notifications' sizes are validated in a more structured way. We would love to see this new op_mode merged in 6.15. The firmware for this new driver (.97.ucode) is not yet publicly available but it'll be sent very soon. People eager to get an early version of this firmware can contact Emmanuel at: emmanuel.grumbach@intel.com I've listed the people who directly contributed code, but many others from various teams have contributed in other ways. Co-developed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Co-developed-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Avraham Stern <avraham.stern@intel.com> Co-developed-by: Daniel Gabay <daniel.gabay@intel.com> Signed-off-by: Daniel Gabay <daniel.gabay@intel.com> Co-developed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Co-developed-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com> Signed-off-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com> Co-developed-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com> Signed-off-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com> Co-developed-by: Benjamin Berg <benjamin.berg@intel.com> Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Co-developed-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://lore.kernel.org/linux-wireless/20250216094321.537988-1-miriam.rachel.korenblit@intel.com/ [fix Kconfig, fix api/phy.h includes, SPDX tag and coding style issues, duplicated includes per 0-day robot] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-02-16 11:42:40 +02:00
*/
struct iwl_mld_scan {
/* Add here fields that need clean up on restart */
struct_group(zeroed_on_hw_restart,
unsigned int status;
u32 uid_status[IWL_MAX_UMAC_SCANS];
u64 start_tsf;
bool last_ebs_failed;
enum iwl_mld_pass_all_sched_results_states pass_all_sched_res;
u8 fw_link_id;
struct {
u32 last_stats_ts_usec;
enum iwl_mld_traffic_load status;
} traffic_load;
);
/* And here fields that survive a fw restart */
size_t cmd_size;
void *cmd;
unsigned long last_6ghz_passive_jiffies;
unsigned long last_start_time_jiffies;
u64 last_mlo_scan_time;
wifi: iwlwifi: add iwlmld sub-driver iwlwifi is the driver of all Intel wifi devices since 2008. Since then, the hardware has changed a lot, but the firmware API has changed even more. The need to keep one driver that supports all those different APIs led us to introduce a new architecture circa 2012 which allowed us to keep the same interface to the hardware (DMAs, Tx queues, etc...) with a new layer to implement the mid-layer between mac80211 and the firmware. The first component is called the 'transport' and the latter is called 'operation_mode' a.k.a op_mode. In 2013 we took advantage of the new architecture to introduce iwlmvm which allowed us to implement the, then, new firmware API. This op_mode supports 7260 and up, those devices supports support at least VHT. Since then, wifi evolved and so did the firmware. It became much bigger and took a lot of functionality from the driver. It became increasingly hard to keep the same op_mode for the newest devices and we experienced frequent regressions on older devices. In order to avoid those regressions and keep the code maintainable, we decided it was about time to start a new op_mode. iwlmld is a new op_mode that supports BE200 or newer if the firmware being used is 97.ucode or newer. If the user has an older devices or BE200 with .96.ucode, iwlmvm will be loaded. Of course, this op_mode selection is seamless. All the features supported in iwlmvm are supported in iwlmld besides a few seldom used use cases: injection and Hotspot 2.0. Those are under work. A few points about the implementation: * iwlmld doesn't have any mutexes, it relies on the wiphy_lock * iwlmld is more "resource oriented": stations, links and interfaces are allocated and freed only after all the relevant flows are completed. * Firmware notifications' sizes are validated in a more structured way. We would love to see this new op_mode merged in 6.15. The firmware for this new driver (.97.ucode) is not yet publicly available but it'll be sent very soon. People eager to get an early version of this firmware can contact Emmanuel at: emmanuel.grumbach@intel.com I've listed the people who directly contributed code, but many others from various teams have contributed in other ways. Co-developed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Co-developed-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Avraham Stern <avraham.stern@intel.com> Co-developed-by: Daniel Gabay <daniel.gabay@intel.com> Signed-off-by: Daniel Gabay <daniel.gabay@intel.com> Co-developed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Co-developed-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com> Signed-off-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com> Co-developed-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com> Signed-off-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com> Co-developed-by: Benjamin Berg <benjamin.berg@intel.com> Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Co-developed-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://lore.kernel.org/linux-wireless/20250216094321.537988-1-miriam.rachel.korenblit@intel.com/ [fix Kconfig, fix api/phy.h includes, SPDX tag and coding style issues, duplicated includes per 0-day robot] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-02-16 11:42:40 +02:00
};
/**
* struct iwl_mld_survey_channel - per-channel survey information
*
* Driver version of &struct survey_info with just the data we want to report.
*
* @time: time in ms the radio was on the channel
* @time_busy: time in ms the channel was sensed busy
* @noise: channel noise in dBm
*/
struct iwl_mld_survey_channel {
u32 time;
u32 time_busy;
s8 noise;
};
/**
* struct iwl_mld_survey - survey information
*
* Survey information for all available channels.
*
* @bands: per-band array for per-channel survey data, points into @channels
* @n_channels: Number of @channels entries that are allocated
* @channels: per-channel information
*/
struct iwl_mld_survey {
struct iwl_mld_survey_channel *bands[NUM_NL80211_BANDS];
int n_channels;
struct iwl_mld_survey_channel channels[] __counted_by(n_channels);
};
wifi: iwlwifi: add iwlmld sub-driver iwlwifi is the driver of all Intel wifi devices since 2008. Since then, the hardware has changed a lot, but the firmware API has changed even more. The need to keep one driver that supports all those different APIs led us to introduce a new architecture circa 2012 which allowed us to keep the same interface to the hardware (DMAs, Tx queues, etc...) with a new layer to implement the mid-layer between mac80211 and the firmware. The first component is called the 'transport' and the latter is called 'operation_mode' a.k.a op_mode. In 2013 we took advantage of the new architecture to introduce iwlmvm which allowed us to implement the, then, new firmware API. This op_mode supports 7260 and up, those devices supports support at least VHT. Since then, wifi evolved and so did the firmware. It became much bigger and took a lot of functionality from the driver. It became increasingly hard to keep the same op_mode for the newest devices and we experienced frequent regressions on older devices. In order to avoid those regressions and keep the code maintainable, we decided it was about time to start a new op_mode. iwlmld is a new op_mode that supports BE200 or newer if the firmware being used is 97.ucode or newer. If the user has an older devices or BE200 with .96.ucode, iwlmvm will be loaded. Of course, this op_mode selection is seamless. All the features supported in iwlmvm are supported in iwlmld besides a few seldom used use cases: injection and Hotspot 2.0. Those are under work. A few points about the implementation: * iwlmld doesn't have any mutexes, it relies on the wiphy_lock * iwlmld is more "resource oriented": stations, links and interfaces are allocated and freed only after all the relevant flows are completed. * Firmware notifications' sizes are validated in a more structured way. We would love to see this new op_mode merged in 6.15. The firmware for this new driver (.97.ucode) is not yet publicly available but it'll be sent very soon. People eager to get an early version of this firmware can contact Emmanuel at: emmanuel.grumbach@intel.com I've listed the people who directly contributed code, but many others from various teams have contributed in other ways. Co-developed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Co-developed-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Avraham Stern <avraham.stern@intel.com> Co-developed-by: Daniel Gabay <daniel.gabay@intel.com> Signed-off-by: Daniel Gabay <daniel.gabay@intel.com> Co-developed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Co-developed-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com> Signed-off-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com> Co-developed-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com> Signed-off-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com> Co-developed-by: Benjamin Berg <benjamin.berg@intel.com> Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Co-developed-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://lore.kernel.org/linux-wireless/20250216094321.537988-1-miriam.rachel.korenblit@intel.com/ [fix Kconfig, fix api/phy.h includes, SPDX tag and coding style issues, duplicated includes per 0-day robot] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-02-16 11:42:40 +02:00
#endif /* __iwl_mld_scan_h__ */