linux/drivers/net/wireless/intel/iwlwifi/mld/mld.c

772 lines
20 KiB
C
Raw Permalink Normal View History

wifi: iwlwifi: add iwlmld sub-driver iwlwifi is the driver of all Intel wifi devices since 2008. Since then, the hardware has changed a lot, but the firmware API has changed even more. The need to keep one driver that supports all those different APIs led us to introduce a new architecture circa 2012 which allowed us to keep the same interface to the hardware (DMAs, Tx queues, etc...) with a new layer to implement the mid-layer between mac80211 and the firmware. The first component is called the 'transport' and the latter is called 'operation_mode' a.k.a op_mode. In 2013 we took advantage of the new architecture to introduce iwlmvm which allowed us to implement the, then, new firmware API. This op_mode supports 7260 and up, those devices supports support at least VHT. Since then, wifi evolved and so did the firmware. It became much bigger and took a lot of functionality from the driver. It became increasingly hard to keep the same op_mode for the newest devices and we experienced frequent regressions on older devices. In order to avoid those regressions and keep the code maintainable, we decided it was about time to start a new op_mode. iwlmld is a new op_mode that supports BE200 or newer if the firmware being used is 97.ucode or newer. If the user has an older devices or BE200 with .96.ucode, iwlmvm will be loaded. Of course, this op_mode selection is seamless. All the features supported in iwlmvm are supported in iwlmld besides a few seldom used use cases: injection and Hotspot 2.0. Those are under work. A few points about the implementation: * iwlmld doesn't have any mutexes, it relies on the wiphy_lock * iwlmld is more "resource oriented": stations, links and interfaces are allocated and freed only after all the relevant flows are completed. * Firmware notifications' sizes are validated in a more structured way. We would love to see this new op_mode merged in 6.15. The firmware for this new driver (.97.ucode) is not yet publicly available but it'll be sent very soon. People eager to get an early version of this firmware can contact Emmanuel at: emmanuel.grumbach@intel.com I've listed the people who directly contributed code, but many others from various teams have contributed in other ways. Co-developed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Co-developed-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Avraham Stern <avraham.stern@intel.com> Co-developed-by: Daniel Gabay <daniel.gabay@intel.com> Signed-off-by: Daniel Gabay <daniel.gabay@intel.com> Co-developed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Co-developed-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com> Signed-off-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com> Co-developed-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com> Signed-off-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com> Co-developed-by: Benjamin Berg <benjamin.berg@intel.com> Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Co-developed-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://lore.kernel.org/linux-wireless/20250216094321.537988-1-miriam.rachel.korenblit@intel.com/ [fix Kconfig, fix api/phy.h includes, SPDX tag and coding style issues, duplicated includes per 0-day robot] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-02-16 11:42:40 +02:00
// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause
/*
* Copyright (C) 2024-2025 Intel Corporation
*/
#include <linux/rtnetlink.h>
wifi: iwlwifi: add iwlmld sub-driver iwlwifi is the driver of all Intel wifi devices since 2008. Since then, the hardware has changed a lot, but the firmware API has changed even more. The need to keep one driver that supports all those different APIs led us to introduce a new architecture circa 2012 which allowed us to keep the same interface to the hardware (DMAs, Tx queues, etc...) with a new layer to implement the mid-layer between mac80211 and the firmware. The first component is called the 'transport' and the latter is called 'operation_mode' a.k.a op_mode. In 2013 we took advantage of the new architecture to introduce iwlmvm which allowed us to implement the, then, new firmware API. This op_mode supports 7260 and up, those devices supports support at least VHT. Since then, wifi evolved and so did the firmware. It became much bigger and took a lot of functionality from the driver. It became increasingly hard to keep the same op_mode for the newest devices and we experienced frequent regressions on older devices. In order to avoid those regressions and keep the code maintainable, we decided it was about time to start a new op_mode. iwlmld is a new op_mode that supports BE200 or newer if the firmware being used is 97.ucode or newer. If the user has an older devices or BE200 with .96.ucode, iwlmvm will be loaded. Of course, this op_mode selection is seamless. All the features supported in iwlmvm are supported in iwlmld besides a few seldom used use cases: injection and Hotspot 2.0. Those are under work. A few points about the implementation: * iwlmld doesn't have any mutexes, it relies on the wiphy_lock * iwlmld is more "resource oriented": stations, links and interfaces are allocated and freed only after all the relevant flows are completed. * Firmware notifications' sizes are validated in a more structured way. We would love to see this new op_mode merged in 6.15. The firmware for this new driver (.97.ucode) is not yet publicly available but it'll be sent very soon. People eager to get an early version of this firmware can contact Emmanuel at: emmanuel.grumbach@intel.com I've listed the people who directly contributed code, but many others from various teams have contributed in other ways. Co-developed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Co-developed-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Avraham Stern <avraham.stern@intel.com> Co-developed-by: Daniel Gabay <daniel.gabay@intel.com> Signed-off-by: Daniel Gabay <daniel.gabay@intel.com> Co-developed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Co-developed-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com> Signed-off-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com> Co-developed-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com> Signed-off-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com> Co-developed-by: Benjamin Berg <benjamin.berg@intel.com> Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Co-developed-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://lore.kernel.org/linux-wireless/20250216094321.537988-1-miriam.rachel.korenblit@intel.com/ [fix Kconfig, fix api/phy.h includes, SPDX tag and coding style issues, duplicated includes per 0-day robot] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-02-16 11:42:40 +02:00
#include <net/mac80211.h>
#include "fw/api/rx.h"
#include "fw/api/datapath.h"
#include "fw/api/commands.h"
#include "fw/api/offload.h"
#include "fw/api/coex.h"
#include "fw/dbg.h"
#include "fw/uefi.h"
#include "mld.h"
#include "mlo.h"
#include "mac80211.h"
#include "led.h"
#include "scan.h"
#include "tx.h"
#include "sta.h"
#include "regulatory.h"
#include "thermal.h"
#include "low_latency.h"
#include "hcmd.h"
#include "fw/api/location.h"
#include "iwl-nvm-parse.h"
wifi: iwlwifi: add iwlmld sub-driver iwlwifi is the driver of all Intel wifi devices since 2008. Since then, the hardware has changed a lot, but the firmware API has changed even more. The need to keep one driver that supports all those different APIs led us to introduce a new architecture circa 2012 which allowed us to keep the same interface to the hardware (DMAs, Tx queues, etc...) with a new layer to implement the mid-layer between mac80211 and the firmware. The first component is called the 'transport' and the latter is called 'operation_mode' a.k.a op_mode. In 2013 we took advantage of the new architecture to introduce iwlmvm which allowed us to implement the, then, new firmware API. This op_mode supports 7260 and up, those devices supports support at least VHT. Since then, wifi evolved and so did the firmware. It became much bigger and took a lot of functionality from the driver. It became increasingly hard to keep the same op_mode for the newest devices and we experienced frequent regressions on older devices. In order to avoid those regressions and keep the code maintainable, we decided it was about time to start a new op_mode. iwlmld is a new op_mode that supports BE200 or newer if the firmware being used is 97.ucode or newer. If the user has an older devices or BE200 with .96.ucode, iwlmvm will be loaded. Of course, this op_mode selection is seamless. All the features supported in iwlmvm are supported in iwlmld besides a few seldom used use cases: injection and Hotspot 2.0. Those are under work. A few points about the implementation: * iwlmld doesn't have any mutexes, it relies on the wiphy_lock * iwlmld is more "resource oriented": stations, links and interfaces are allocated and freed only after all the relevant flows are completed. * Firmware notifications' sizes are validated in a more structured way. We would love to see this new op_mode merged in 6.15. The firmware for this new driver (.97.ucode) is not yet publicly available but it'll be sent very soon. People eager to get an early version of this firmware can contact Emmanuel at: emmanuel.grumbach@intel.com I've listed the people who directly contributed code, but many others from various teams have contributed in other ways. Co-developed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Co-developed-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Avraham Stern <avraham.stern@intel.com> Co-developed-by: Daniel Gabay <daniel.gabay@intel.com> Signed-off-by: Daniel Gabay <daniel.gabay@intel.com> Co-developed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Co-developed-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com> Signed-off-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com> Co-developed-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com> Signed-off-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com> Co-developed-by: Benjamin Berg <benjamin.berg@intel.com> Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Co-developed-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://lore.kernel.org/linux-wireless/20250216094321.537988-1-miriam.rachel.korenblit@intel.com/ [fix Kconfig, fix api/phy.h includes, SPDX tag and coding style issues, duplicated includes per 0-day robot] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-02-16 11:42:40 +02:00
#define DRV_DESCRIPTION "Intel(R) MLD wireless driver for Linux"
MODULE_DESCRIPTION(DRV_DESCRIPTION);
MODULE_LICENSE("GPL");
MODULE_IMPORT_NS("IWLWIFI");
static const struct iwl_op_mode_ops iwl_mld_ops;
static int __init iwl_mld_init(void)
{
int ret = iwl_opmode_register("iwlmld", &iwl_mld_ops);
if (ret)
pr_err("Unable to register MLD op_mode: %d\n", ret);
return ret;
}
module_init(iwl_mld_init);
static void __exit iwl_mld_exit(void)
{
iwl_opmode_deregister("iwlmld");
}
module_exit(iwl_mld_exit);
static void iwl_mld_hw_set_regulatory(struct iwl_mld *mld)
{
struct wiphy *wiphy = mld->wiphy;
wiphy->regulatory_flags |= REGULATORY_WIPHY_SELF_MANAGED;
wiphy->regulatory_flags |= REGULATORY_ENABLE_RELAX_NO_IR;
}
wifi: iwlwifi: add iwlmld sub-driver iwlwifi is the driver of all Intel wifi devices since 2008. Since then, the hardware has changed a lot, but the firmware API has changed even more. The need to keep one driver that supports all those different APIs led us to introduce a new architecture circa 2012 which allowed us to keep the same interface to the hardware (DMAs, Tx queues, etc...) with a new layer to implement the mid-layer between mac80211 and the firmware. The first component is called the 'transport' and the latter is called 'operation_mode' a.k.a op_mode. In 2013 we took advantage of the new architecture to introduce iwlmvm which allowed us to implement the, then, new firmware API. This op_mode supports 7260 and up, those devices supports support at least VHT. Since then, wifi evolved and so did the firmware. It became much bigger and took a lot of functionality from the driver. It became increasingly hard to keep the same op_mode for the newest devices and we experienced frequent regressions on older devices. In order to avoid those regressions and keep the code maintainable, we decided it was about time to start a new op_mode. iwlmld is a new op_mode that supports BE200 or newer if the firmware being used is 97.ucode or newer. If the user has an older devices or BE200 with .96.ucode, iwlmvm will be loaded. Of course, this op_mode selection is seamless. All the features supported in iwlmvm are supported in iwlmld besides a few seldom used use cases: injection and Hotspot 2.0. Those are under work. A few points about the implementation: * iwlmld doesn't have any mutexes, it relies on the wiphy_lock * iwlmld is more "resource oriented": stations, links and interfaces are allocated and freed only after all the relevant flows are completed. * Firmware notifications' sizes are validated in a more structured way. We would love to see this new op_mode merged in 6.15. The firmware for this new driver (.97.ucode) is not yet publicly available but it'll be sent very soon. People eager to get an early version of this firmware can contact Emmanuel at: emmanuel.grumbach@intel.com I've listed the people who directly contributed code, but many others from various teams have contributed in other ways. Co-developed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Co-developed-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Avraham Stern <avraham.stern@intel.com> Co-developed-by: Daniel Gabay <daniel.gabay@intel.com> Signed-off-by: Daniel Gabay <daniel.gabay@intel.com> Co-developed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Co-developed-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com> Signed-off-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com> Co-developed-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com> Signed-off-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com> Co-developed-by: Benjamin Berg <benjamin.berg@intel.com> Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Co-developed-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://lore.kernel.org/linux-wireless/20250216094321.537988-1-miriam.rachel.korenblit@intel.com/ [fix Kconfig, fix api/phy.h includes, SPDX tag and coding style issues, duplicated includes per 0-day robot] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-02-16 11:42:40 +02:00
VISIBLE_IF_IWLWIFI_KUNIT
void iwl_construct_mld(struct iwl_mld *mld, struct iwl_trans *trans,
const struct iwl_rf_cfg *cfg, const struct iwl_fw *fw,
wifi: iwlwifi: add iwlmld sub-driver iwlwifi is the driver of all Intel wifi devices since 2008. Since then, the hardware has changed a lot, but the firmware API has changed even more. The need to keep one driver that supports all those different APIs led us to introduce a new architecture circa 2012 which allowed us to keep the same interface to the hardware (DMAs, Tx queues, etc...) with a new layer to implement the mid-layer between mac80211 and the firmware. The first component is called the 'transport' and the latter is called 'operation_mode' a.k.a op_mode. In 2013 we took advantage of the new architecture to introduce iwlmvm which allowed us to implement the, then, new firmware API. This op_mode supports 7260 and up, those devices supports support at least VHT. Since then, wifi evolved and so did the firmware. It became much bigger and took a lot of functionality from the driver. It became increasingly hard to keep the same op_mode for the newest devices and we experienced frequent regressions on older devices. In order to avoid those regressions and keep the code maintainable, we decided it was about time to start a new op_mode. iwlmld is a new op_mode that supports BE200 or newer if the firmware being used is 97.ucode or newer. If the user has an older devices or BE200 with .96.ucode, iwlmvm will be loaded. Of course, this op_mode selection is seamless. All the features supported in iwlmvm are supported in iwlmld besides a few seldom used use cases: injection and Hotspot 2.0. Those are under work. A few points about the implementation: * iwlmld doesn't have any mutexes, it relies on the wiphy_lock * iwlmld is more "resource oriented": stations, links and interfaces are allocated and freed only after all the relevant flows are completed. * Firmware notifications' sizes are validated in a more structured way. We would love to see this new op_mode merged in 6.15. The firmware for this new driver (.97.ucode) is not yet publicly available but it'll be sent very soon. People eager to get an early version of this firmware can contact Emmanuel at: emmanuel.grumbach@intel.com I've listed the people who directly contributed code, but many others from various teams have contributed in other ways. Co-developed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Co-developed-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Avraham Stern <avraham.stern@intel.com> Co-developed-by: Daniel Gabay <daniel.gabay@intel.com> Signed-off-by: Daniel Gabay <daniel.gabay@intel.com> Co-developed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Co-developed-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com> Signed-off-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com> Co-developed-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com> Signed-off-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com> Co-developed-by: Benjamin Berg <benjamin.berg@intel.com> Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Co-developed-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://lore.kernel.org/linux-wireless/20250216094321.537988-1-miriam.rachel.korenblit@intel.com/ [fix Kconfig, fix api/phy.h includes, SPDX tag and coding style issues, duplicated includes per 0-day robot] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-02-16 11:42:40 +02:00
struct ieee80211_hw *hw, struct dentry *dbgfs_dir)
{
mld->dev = trans->dev;
mld->trans = trans;
mld->cfg = cfg;
mld->fw = fw;
mld->hw = hw;
mld->wiphy = hw->wiphy;
mld->debugfs_dir = dbgfs_dir;
iwl_notification_wait_init(&mld->notif_wait);
/* Setup async RX handling */
spin_lock_init(&mld->async_handlers_lock);
INIT_LIST_HEAD(&mld->async_handlers_list);
wifi: iwlwifi: add iwlmld sub-driver iwlwifi is the driver of all Intel wifi devices since 2008. Since then, the hardware has changed a lot, but the firmware API has changed even more. The need to keep one driver that supports all those different APIs led us to introduce a new architecture circa 2012 which allowed us to keep the same interface to the hardware (DMAs, Tx queues, etc...) with a new layer to implement the mid-layer between mac80211 and the firmware. The first component is called the 'transport' and the latter is called 'operation_mode' a.k.a op_mode. In 2013 we took advantage of the new architecture to introduce iwlmvm which allowed us to implement the, then, new firmware API. This op_mode supports 7260 and up, those devices supports support at least VHT. Since then, wifi evolved and so did the firmware. It became much bigger and took a lot of functionality from the driver. It became increasingly hard to keep the same op_mode for the newest devices and we experienced frequent regressions on older devices. In order to avoid those regressions and keep the code maintainable, we decided it was about time to start a new op_mode. iwlmld is a new op_mode that supports BE200 or newer if the firmware being used is 97.ucode or newer. If the user has an older devices or BE200 with .96.ucode, iwlmvm will be loaded. Of course, this op_mode selection is seamless. All the features supported in iwlmvm are supported in iwlmld besides a few seldom used use cases: injection and Hotspot 2.0. Those are under work. A few points about the implementation: * iwlmld doesn't have any mutexes, it relies on the wiphy_lock * iwlmld is more "resource oriented": stations, links and interfaces are allocated and freed only after all the relevant flows are completed. * Firmware notifications' sizes are validated in a more structured way. We would love to see this new op_mode merged in 6.15. The firmware for this new driver (.97.ucode) is not yet publicly available but it'll be sent very soon. People eager to get an early version of this firmware can contact Emmanuel at: emmanuel.grumbach@intel.com I've listed the people who directly contributed code, but many others from various teams have contributed in other ways. Co-developed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Co-developed-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Avraham Stern <avraham.stern@intel.com> Co-developed-by: Daniel Gabay <daniel.gabay@intel.com> Signed-off-by: Daniel Gabay <daniel.gabay@intel.com> Co-developed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Co-developed-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com> Signed-off-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com> Co-developed-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com> Signed-off-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com> Co-developed-by: Benjamin Berg <benjamin.berg@intel.com> Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Co-developed-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://lore.kernel.org/linux-wireless/20250216094321.537988-1-miriam.rachel.korenblit@intel.com/ [fix Kconfig, fix api/phy.h includes, SPDX tag and coding style issues, duplicated includes per 0-day robot] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-02-16 11:42:40 +02:00
wiphy_work_init(&mld->async_handlers_wk,
iwl_mld_async_handlers_wk);
/* Dynamic Queue Allocation */
spin_lock_init(&mld->add_txqs_lock);
INIT_LIST_HEAD(&mld->txqs_to_add);
wiphy_work_init(&mld->add_txqs_wk, iwl_mld_add_txqs_wk);
/* Setup RX queues sync wait queue */
init_waitqueue_head(&mld->rxq_sync.waitq);
}
EXPORT_SYMBOL_IF_IWLWIFI_KUNIT(iwl_construct_mld);
static void __acquires(&mld->wiphy->mtx)
iwl_mld_fwrt_dump_start(void *ctx)
{
struct iwl_mld *mld = ctx;
wiphy_lock(mld->wiphy);
}
static void __releases(&mld->wiphy->mtx)
iwl_mld_fwrt_dump_end(void *ctx)
{
struct iwl_mld *mld = ctx;
wiphy_unlock(mld->wiphy);
}
static bool iwl_mld_d3_debug_enable(void *ctx)
{
return IWL_MLD_D3_DEBUG;
}
static int iwl_mld_fwrt_send_hcmd(void *ctx, struct iwl_host_cmd *host_cmd)
{
struct iwl_mld *mld = (struct iwl_mld *)ctx;
int ret;
wiphy_lock(mld->wiphy);
ret = iwl_mld_send_cmd(mld, host_cmd);
wiphy_unlock(mld->wiphy);
return ret;
}
static const struct iwl_fw_runtime_ops iwl_mld_fwrt_ops = {
.dump_start = iwl_mld_fwrt_dump_start,
.dump_end = iwl_mld_fwrt_dump_end,
.send_hcmd = iwl_mld_fwrt_send_hcmd,
.d3_debug_enable = iwl_mld_d3_debug_enable,
};
static void
iwl_mld_construct_fw_runtime(struct iwl_mld *mld, struct iwl_trans *trans,
const struct iwl_fw *fw,
struct dentry *debugfs_dir)
{
iwl_fw_runtime_init(&mld->fwrt, trans, fw, &iwl_mld_fwrt_ops, mld,
NULL, NULL, debugfs_dir);
iwl_fw_set_current_image(&mld->fwrt, IWL_UCODE_REGULAR);
}
/* Please keep this array *SORTED* by hex value.
* Access is done through binary search
*/
static const struct iwl_hcmd_names iwl_mld_legacy_names[] = {
HCMD_NAME(UCODE_ALIVE_NTFY),
HCMD_NAME(INIT_COMPLETE_NOTIF),
HCMD_NAME(PHY_CONTEXT_CMD),
HCMD_NAME(SCAN_CFG_CMD),
HCMD_NAME(SCAN_REQ_UMAC),
HCMD_NAME(SCAN_ABORT_UMAC),
HCMD_NAME(SCAN_COMPLETE_UMAC),
HCMD_NAME(TX_CMD),
HCMD_NAME(TXPATH_FLUSH),
HCMD_NAME(LEDS_CMD),
HCMD_NAME(WNM_80211V_TIMING_MEASUREMENT_NOTIFICATION),
HCMD_NAME(WNM_80211V_TIMING_MEASUREMENT_CONFIRM_NOTIFICATION),
HCMD_NAME(SCAN_OFFLOAD_UPDATE_PROFILES_CMD),
HCMD_NAME(POWER_TABLE_CMD),
HCMD_NAME(PSM_UAPSD_AP_MISBEHAVING_NOTIFICATION),
HCMD_NAME(BEACON_NOTIFICATION),
HCMD_NAME(BEACON_TEMPLATE_CMD),
HCMD_NAME(TX_ANT_CONFIGURATION_CMD),
HCMD_NAME(REDUCE_TX_POWER_CMD),
HCMD_NAME(MISSED_BEACONS_NOTIFICATION),
HCMD_NAME(MAC_PM_POWER_TABLE),
HCMD_NAME(MFUART_LOAD_NOTIFICATION),
HCMD_NAME(RSS_CONFIG_CMD),
HCMD_NAME(SCAN_ITERATION_COMPLETE_UMAC),
HCMD_NAME(REPLY_RX_MPDU_CMD),
HCMD_NAME(BA_NOTIF),
HCMD_NAME(MCC_UPDATE_CMD),
HCMD_NAME(MCC_CHUB_UPDATE_CMD),
HCMD_NAME(MCAST_FILTER_CMD),
HCMD_NAME(REPLY_BEACON_FILTERING_CMD),
HCMD_NAME(PROT_OFFLOAD_CONFIG_CMD),
HCMD_NAME(MATCH_FOUND_NOTIFICATION),
HCMD_NAME(WOWLAN_PATTERNS),
HCMD_NAME(WOWLAN_CONFIGURATION),
HCMD_NAME(WOWLAN_TSC_RSC_PARAM),
HCMD_NAME(WOWLAN_KEK_KCK_MATERIAL),
HCMD_NAME(DEBUG_HOST_COMMAND),
HCMD_NAME(LDBG_CONFIG_CMD),
};
/* Please keep this array *SORTED* by hex value.
* Access is done through binary search
*/
static const struct iwl_hcmd_names iwl_mld_system_names[] = {
HCMD_NAME(SHARED_MEM_CFG_CMD),
HCMD_NAME(SOC_CONFIGURATION_CMD),
HCMD_NAME(INIT_EXTENDED_CFG_CMD),
HCMD_NAME(FW_ERROR_RECOVERY_CMD),
HCMD_NAME(RFI_CONFIG_CMD),
wifi: iwlwifi: add iwlmld sub-driver iwlwifi is the driver of all Intel wifi devices since 2008. Since then, the hardware has changed a lot, but the firmware API has changed even more. The need to keep one driver that supports all those different APIs led us to introduce a new architecture circa 2012 which allowed us to keep the same interface to the hardware (DMAs, Tx queues, etc...) with a new layer to implement the mid-layer between mac80211 and the firmware. The first component is called the 'transport' and the latter is called 'operation_mode' a.k.a op_mode. In 2013 we took advantage of the new architecture to introduce iwlmvm which allowed us to implement the, then, new firmware API. This op_mode supports 7260 and up, those devices supports support at least VHT. Since then, wifi evolved and so did the firmware. It became much bigger and took a lot of functionality from the driver. It became increasingly hard to keep the same op_mode for the newest devices and we experienced frequent regressions on older devices. In order to avoid those regressions and keep the code maintainable, we decided it was about time to start a new op_mode. iwlmld is a new op_mode that supports BE200 or newer if the firmware being used is 97.ucode or newer. If the user has an older devices or BE200 with .96.ucode, iwlmvm will be loaded. Of course, this op_mode selection is seamless. All the features supported in iwlmvm are supported in iwlmld besides a few seldom used use cases: injection and Hotspot 2.0. Those are under work. A few points about the implementation: * iwlmld doesn't have any mutexes, it relies on the wiphy_lock * iwlmld is more "resource oriented": stations, links and interfaces are allocated and freed only after all the relevant flows are completed. * Firmware notifications' sizes are validated in a more structured way. We would love to see this new op_mode merged in 6.15. The firmware for this new driver (.97.ucode) is not yet publicly available but it'll be sent very soon. People eager to get an early version of this firmware can contact Emmanuel at: emmanuel.grumbach@intel.com I've listed the people who directly contributed code, but many others from various teams have contributed in other ways. Co-developed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Co-developed-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Avraham Stern <avraham.stern@intel.com> Co-developed-by: Daniel Gabay <daniel.gabay@intel.com> Signed-off-by: Daniel Gabay <daniel.gabay@intel.com> Co-developed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Co-developed-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com> Signed-off-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com> Co-developed-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com> Signed-off-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com> Co-developed-by: Benjamin Berg <benjamin.berg@intel.com> Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Co-developed-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://lore.kernel.org/linux-wireless/20250216094321.537988-1-miriam.rachel.korenblit@intel.com/ [fix Kconfig, fix api/phy.h includes, SPDX tag and coding style issues, duplicated includes per 0-day robot] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-02-16 11:42:40 +02:00
HCMD_NAME(RFI_GET_FREQ_TABLE_CMD),
HCMD_NAME(SYSTEM_STATISTICS_CMD),
HCMD_NAME(SYSTEM_STATISTICS_END_NOTIF),
};
/* Please keep this array *SORTED* by hex value.
* Access is done through binary search
*/
static const struct iwl_hcmd_names iwl_mld_reg_and_nvm_names[] = {
HCMD_NAME(LARI_CONFIG_CHANGE),
HCMD_NAME(NVM_GET_INFO),
HCMD_NAME(TAS_CONFIG),
HCMD_NAME(SAR_OFFSET_MAPPING_TABLE_CMD),
HCMD_NAME(MCC_ALLOWED_AP_TYPE_CMD),
};
/* Please keep this array *SORTED* by hex value.
* Access is done through binary search
*/
static const struct iwl_hcmd_names iwl_mld_debug_names[] = {
HCMD_NAME(HOST_EVENT_CFG),
HCMD_NAME(DBGC_SUSPEND_RESUME),
};
/* Please keep this array *SORTED* by hex value.
* Access is done through binary search
*/
static const struct iwl_hcmd_names iwl_mld_mac_conf_names[] = {
HCMD_NAME(LOW_LATENCY_CMD),
HCMD_NAME(SESSION_PROTECTION_CMD),
HCMD_NAME(MAC_CONFIG_CMD),
HCMD_NAME(LINK_CONFIG_CMD),
HCMD_NAME(STA_CONFIG_CMD),
HCMD_NAME(AUX_STA_CMD),
HCMD_NAME(STA_REMOVE_CMD),
HCMD_NAME(ROC_CMD),
HCMD_NAME(MISSED_BEACONS_NOTIF),
HCMD_NAME(EMLSR_TRANS_FAIL_NOTIF),
HCMD_NAME(ROC_NOTIF),
HCMD_NAME(CHANNEL_SWITCH_ERROR_NOTIF),
HCMD_NAME(SESSION_PROTECTION_NOTIF),
HCMD_NAME(PROBE_RESPONSE_DATA_NOTIF),
HCMD_NAME(CHANNEL_SWITCH_START_NOTIF),
};
/* Please keep this array *SORTED* by hex value.
* Access is done through binary search
*/
static const struct iwl_hcmd_names iwl_mld_data_path_names[] = {
HCMD_NAME(TRIGGER_RX_QUEUES_NOTIF_CMD),
HCMD_NAME(WNM_PLATFORM_PTM_REQUEST_CMD),
HCMD_NAME(WNM_80211V_TIMING_MEASUREMENT_CONFIG_CMD),
HCMD_NAME(RFH_QUEUE_CONFIG_CMD),
HCMD_NAME(TLC_MNG_CONFIG_CMD),
HCMD_NAME(RX_BAID_ALLOCATION_CONFIG_CMD),
HCMD_NAME(SCD_QUEUE_CONFIG_CMD),
HCMD_NAME(ESR_MODE_NOTIF),
HCMD_NAME(MONITOR_NOTIF),
HCMD_NAME(TLC_MNG_UPDATE_NOTIF),
HCMD_NAME(BEACON_FILTER_IN_NOTIF),
wifi: iwlwifi: add iwlmld sub-driver iwlwifi is the driver of all Intel wifi devices since 2008. Since then, the hardware has changed a lot, but the firmware API has changed even more. The need to keep one driver that supports all those different APIs led us to introduce a new architecture circa 2012 which allowed us to keep the same interface to the hardware (DMAs, Tx queues, etc...) with a new layer to implement the mid-layer between mac80211 and the firmware. The first component is called the 'transport' and the latter is called 'operation_mode' a.k.a op_mode. In 2013 we took advantage of the new architecture to introduce iwlmvm which allowed us to implement the, then, new firmware API. This op_mode supports 7260 and up, those devices supports support at least VHT. Since then, wifi evolved and so did the firmware. It became much bigger and took a lot of functionality from the driver. It became increasingly hard to keep the same op_mode for the newest devices and we experienced frequent regressions on older devices. In order to avoid those regressions and keep the code maintainable, we decided it was about time to start a new op_mode. iwlmld is a new op_mode that supports BE200 or newer if the firmware being used is 97.ucode or newer. If the user has an older devices or BE200 with .96.ucode, iwlmvm will be loaded. Of course, this op_mode selection is seamless. All the features supported in iwlmvm are supported in iwlmld besides a few seldom used use cases: injection and Hotspot 2.0. Those are under work. A few points about the implementation: * iwlmld doesn't have any mutexes, it relies on the wiphy_lock * iwlmld is more "resource oriented": stations, links and interfaces are allocated and freed only after all the relevant flows are completed. * Firmware notifications' sizes are validated in a more structured way. We would love to see this new op_mode merged in 6.15. The firmware for this new driver (.97.ucode) is not yet publicly available but it'll be sent very soon. People eager to get an early version of this firmware can contact Emmanuel at: emmanuel.grumbach@intel.com I've listed the people who directly contributed code, but many others from various teams have contributed in other ways. Co-developed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Co-developed-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Avraham Stern <avraham.stern@intel.com> Co-developed-by: Daniel Gabay <daniel.gabay@intel.com> Signed-off-by: Daniel Gabay <daniel.gabay@intel.com> Co-developed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Co-developed-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com> Signed-off-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com> Co-developed-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com> Signed-off-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com> Co-developed-by: Benjamin Berg <benjamin.berg@intel.com> Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Co-developed-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://lore.kernel.org/linux-wireless/20250216094321.537988-1-miriam.rachel.korenblit@intel.com/ [fix Kconfig, fix api/phy.h includes, SPDX tag and coding style issues, duplicated includes per 0-day robot] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-02-16 11:42:40 +02:00
HCMD_NAME(MU_GROUP_MGMT_NOTIF),
};
/* Please keep this array *SORTED* by hex value.
* Access is done through binary search
*/
static const struct iwl_hcmd_names iwl_mld_scan_names[] = {
HCMD_NAME(CHANNEL_SURVEY_NOTIF),
};
wifi: iwlwifi: add iwlmld sub-driver iwlwifi is the driver of all Intel wifi devices since 2008. Since then, the hardware has changed a lot, but the firmware API has changed even more. The need to keep one driver that supports all those different APIs led us to introduce a new architecture circa 2012 which allowed us to keep the same interface to the hardware (DMAs, Tx queues, etc...) with a new layer to implement the mid-layer between mac80211 and the firmware. The first component is called the 'transport' and the latter is called 'operation_mode' a.k.a op_mode. In 2013 we took advantage of the new architecture to introduce iwlmvm which allowed us to implement the, then, new firmware API. This op_mode supports 7260 and up, those devices supports support at least VHT. Since then, wifi evolved and so did the firmware. It became much bigger and took a lot of functionality from the driver. It became increasingly hard to keep the same op_mode for the newest devices and we experienced frequent regressions on older devices. In order to avoid those regressions and keep the code maintainable, we decided it was about time to start a new op_mode. iwlmld is a new op_mode that supports BE200 or newer if the firmware being used is 97.ucode or newer. If the user has an older devices or BE200 with .96.ucode, iwlmvm will be loaded. Of course, this op_mode selection is seamless. All the features supported in iwlmvm are supported in iwlmld besides a few seldom used use cases: injection and Hotspot 2.0. Those are under work. A few points about the implementation: * iwlmld doesn't have any mutexes, it relies on the wiphy_lock * iwlmld is more "resource oriented": stations, links and interfaces are allocated and freed only after all the relevant flows are completed. * Firmware notifications' sizes are validated in a more structured way. We would love to see this new op_mode merged in 6.15. The firmware for this new driver (.97.ucode) is not yet publicly available but it'll be sent very soon. People eager to get an early version of this firmware can contact Emmanuel at: emmanuel.grumbach@intel.com I've listed the people who directly contributed code, but many others from various teams have contributed in other ways. Co-developed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Co-developed-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Avraham Stern <avraham.stern@intel.com> Co-developed-by: Daniel Gabay <daniel.gabay@intel.com> Signed-off-by: Daniel Gabay <daniel.gabay@intel.com> Co-developed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Co-developed-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com> Signed-off-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com> Co-developed-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com> Signed-off-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com> Co-developed-by: Benjamin Berg <benjamin.berg@intel.com> Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Co-developed-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://lore.kernel.org/linux-wireless/20250216094321.537988-1-miriam.rachel.korenblit@intel.com/ [fix Kconfig, fix api/phy.h includes, SPDX tag and coding style issues, duplicated includes per 0-day robot] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-02-16 11:42:40 +02:00
/* Please keep this array *SORTED* by hex value.
* Access is done through binary search
*/
static const struct iwl_hcmd_names iwl_mld_location_names[] = {
HCMD_NAME(TOF_RANGE_REQ_CMD),
HCMD_NAME(TOF_RANGE_RESPONSE_NOTIF),
};
/* Please keep this array *SORTED* by hex value.
* Access is done through binary search
*/
static const struct iwl_hcmd_names iwl_mld_phy_names[] = {
HCMD_NAME(CMD_DTS_MEASUREMENT_TRIGGER_WIDE),
HCMD_NAME(CTDP_CONFIG_CMD),
HCMD_NAME(TEMP_REPORTING_THRESHOLDS_CMD),
HCMD_NAME(PER_CHAIN_LIMIT_OFFSET_CMD),
HCMD_NAME(CT_KILL_NOTIFICATION),
HCMD_NAME(DTS_MEASUREMENT_NOTIF_WIDE),
};
/* Please keep this array *SORTED* by hex value.
* Access is done through binary search
*/
static const struct iwl_hcmd_names iwl_mld_statistics_names[] = {
HCMD_NAME(STATISTICS_OPER_NOTIF),
HCMD_NAME(STATISTICS_OPER_PART1_NOTIF),
};
/* Please keep this array *SORTED* by hex value.
* Access is done through binary search
*/
static const struct iwl_hcmd_names iwl_mld_prot_offload_names[] = {
HCMD_NAME(WOWLAN_WAKE_PKT_NOTIFICATION),
HCMD_NAME(WOWLAN_INFO_NOTIFICATION),
HCMD_NAME(D3_END_NOTIFICATION),
wifi: iwlwifi: add iwlmld sub-driver iwlwifi is the driver of all Intel wifi devices since 2008. Since then, the hardware has changed a lot, but the firmware API has changed even more. The need to keep one driver that supports all those different APIs led us to introduce a new architecture circa 2012 which allowed us to keep the same interface to the hardware (DMAs, Tx queues, etc...) with a new layer to implement the mid-layer between mac80211 and the firmware. The first component is called the 'transport' and the latter is called 'operation_mode' a.k.a op_mode. In 2013 we took advantage of the new architecture to introduce iwlmvm which allowed us to implement the, then, new firmware API. This op_mode supports 7260 and up, those devices supports support at least VHT. Since then, wifi evolved and so did the firmware. It became much bigger and took a lot of functionality from the driver. It became increasingly hard to keep the same op_mode for the newest devices and we experienced frequent regressions on older devices. In order to avoid those regressions and keep the code maintainable, we decided it was about time to start a new op_mode. iwlmld is a new op_mode that supports BE200 or newer if the firmware being used is 97.ucode or newer. If the user has an older devices or BE200 with .96.ucode, iwlmvm will be loaded. Of course, this op_mode selection is seamless. All the features supported in iwlmvm are supported in iwlmld besides a few seldom used use cases: injection and Hotspot 2.0. Those are under work. A few points about the implementation: * iwlmld doesn't have any mutexes, it relies on the wiphy_lock * iwlmld is more "resource oriented": stations, links and interfaces are allocated and freed only after all the relevant flows are completed. * Firmware notifications' sizes are validated in a more structured way. We would love to see this new op_mode merged in 6.15. The firmware for this new driver (.97.ucode) is not yet publicly available but it'll be sent very soon. People eager to get an early version of this firmware can contact Emmanuel at: emmanuel.grumbach@intel.com I've listed the people who directly contributed code, but many others from various teams have contributed in other ways. Co-developed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Co-developed-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Avraham Stern <avraham.stern@intel.com> Co-developed-by: Daniel Gabay <daniel.gabay@intel.com> Signed-off-by: Daniel Gabay <daniel.gabay@intel.com> Co-developed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Co-developed-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com> Signed-off-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com> Co-developed-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com> Signed-off-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com> Co-developed-by: Benjamin Berg <benjamin.berg@intel.com> Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Co-developed-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://lore.kernel.org/linux-wireless/20250216094321.537988-1-miriam.rachel.korenblit@intel.com/ [fix Kconfig, fix api/phy.h includes, SPDX tag and coding style issues, duplicated includes per 0-day robot] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-02-16 11:42:40 +02:00
};
/* Please keep this array *SORTED* by hex value.
* Access is done through binary search
*/
static const struct iwl_hcmd_names iwl_mld_coex_names[] = {
HCMD_NAME(PROFILE_NOTIF),
};
VISIBLE_IF_IWLWIFI_KUNIT
const struct iwl_hcmd_arr iwl_mld_groups[] = {
[LEGACY_GROUP] = HCMD_ARR(iwl_mld_legacy_names),
[LONG_GROUP] = HCMD_ARR(iwl_mld_legacy_names),
[SYSTEM_GROUP] = HCMD_ARR(iwl_mld_system_names),
[MAC_CONF_GROUP] = HCMD_ARR(iwl_mld_mac_conf_names),
[DATA_PATH_GROUP] = HCMD_ARR(iwl_mld_data_path_names),
[SCAN_GROUP] = HCMD_ARR(iwl_mld_scan_names),
wifi: iwlwifi: add iwlmld sub-driver iwlwifi is the driver of all Intel wifi devices since 2008. Since then, the hardware has changed a lot, but the firmware API has changed even more. The need to keep one driver that supports all those different APIs led us to introduce a new architecture circa 2012 which allowed us to keep the same interface to the hardware (DMAs, Tx queues, etc...) with a new layer to implement the mid-layer between mac80211 and the firmware. The first component is called the 'transport' and the latter is called 'operation_mode' a.k.a op_mode. In 2013 we took advantage of the new architecture to introduce iwlmvm which allowed us to implement the, then, new firmware API. This op_mode supports 7260 and up, those devices supports support at least VHT. Since then, wifi evolved and so did the firmware. It became much bigger and took a lot of functionality from the driver. It became increasingly hard to keep the same op_mode for the newest devices and we experienced frequent regressions on older devices. In order to avoid those regressions and keep the code maintainable, we decided it was about time to start a new op_mode. iwlmld is a new op_mode that supports BE200 or newer if the firmware being used is 97.ucode or newer. If the user has an older devices or BE200 with .96.ucode, iwlmvm will be loaded. Of course, this op_mode selection is seamless. All the features supported in iwlmvm are supported in iwlmld besides a few seldom used use cases: injection and Hotspot 2.0. Those are under work. A few points about the implementation: * iwlmld doesn't have any mutexes, it relies on the wiphy_lock * iwlmld is more "resource oriented": stations, links and interfaces are allocated and freed only after all the relevant flows are completed. * Firmware notifications' sizes are validated in a more structured way. We would love to see this new op_mode merged in 6.15. The firmware for this new driver (.97.ucode) is not yet publicly available but it'll be sent very soon. People eager to get an early version of this firmware can contact Emmanuel at: emmanuel.grumbach@intel.com I've listed the people who directly contributed code, but many others from various teams have contributed in other ways. Co-developed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Co-developed-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Avraham Stern <avraham.stern@intel.com> Co-developed-by: Daniel Gabay <daniel.gabay@intel.com> Signed-off-by: Daniel Gabay <daniel.gabay@intel.com> Co-developed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Co-developed-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com> Signed-off-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com> Co-developed-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com> Signed-off-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com> Co-developed-by: Benjamin Berg <benjamin.berg@intel.com> Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Co-developed-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://lore.kernel.org/linux-wireless/20250216094321.537988-1-miriam.rachel.korenblit@intel.com/ [fix Kconfig, fix api/phy.h includes, SPDX tag and coding style issues, duplicated includes per 0-day robot] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-02-16 11:42:40 +02:00
[LOCATION_GROUP] = HCMD_ARR(iwl_mld_location_names),
[REGULATORY_AND_NVM_GROUP] = HCMD_ARR(iwl_mld_reg_and_nvm_names),
[DEBUG_GROUP] = HCMD_ARR(iwl_mld_debug_names),
[PHY_OPS_GROUP] = HCMD_ARR(iwl_mld_phy_names),
[STATISTICS_GROUP] = HCMD_ARR(iwl_mld_statistics_names),
[PROT_OFFLOAD_GROUP] = HCMD_ARR(iwl_mld_prot_offload_names),
[BT_COEX_GROUP] = HCMD_ARR(iwl_mld_coex_names),
};
EXPORT_SYMBOL_IF_IWLWIFI_KUNIT(iwl_mld_groups);
#if IS_ENABLED(CONFIG_IWLWIFI_KUNIT_TESTS)
const unsigned int global_iwl_mld_goups_size = ARRAY_SIZE(iwl_mld_groups);
EXPORT_SYMBOL_IF_IWLWIFI_KUNIT(global_iwl_mld_goups_size);
#endif
static void
iwl_mld_configure_trans(struct iwl_op_mode *op_mode)
{
struct iwl_mld *mld = IWL_OP_MODE_GET_MLD(op_mode);
wifi: iwlwifi: add iwlmld sub-driver iwlwifi is the driver of all Intel wifi devices since 2008. Since then, the hardware has changed a lot, but the firmware API has changed even more. The need to keep one driver that supports all those different APIs led us to introduce a new architecture circa 2012 which allowed us to keep the same interface to the hardware (DMAs, Tx queues, etc...) with a new layer to implement the mid-layer between mac80211 and the firmware. The first component is called the 'transport' and the latter is called 'operation_mode' a.k.a op_mode. In 2013 we took advantage of the new architecture to introduce iwlmvm which allowed us to implement the, then, new firmware API. This op_mode supports 7260 and up, those devices supports support at least VHT. Since then, wifi evolved and so did the firmware. It became much bigger and took a lot of functionality from the driver. It became increasingly hard to keep the same op_mode for the newest devices and we experienced frequent regressions on older devices. In order to avoid those regressions and keep the code maintainable, we decided it was about time to start a new op_mode. iwlmld is a new op_mode that supports BE200 or newer if the firmware being used is 97.ucode or newer. If the user has an older devices or BE200 with .96.ucode, iwlmvm will be loaded. Of course, this op_mode selection is seamless. All the features supported in iwlmvm are supported in iwlmld besides a few seldom used use cases: injection and Hotspot 2.0. Those are under work. A few points about the implementation: * iwlmld doesn't have any mutexes, it relies on the wiphy_lock * iwlmld is more "resource oriented": stations, links and interfaces are allocated and freed only after all the relevant flows are completed. * Firmware notifications' sizes are validated in a more structured way. We would love to see this new op_mode merged in 6.15. The firmware for this new driver (.97.ucode) is not yet publicly available but it'll be sent very soon. People eager to get an early version of this firmware can contact Emmanuel at: emmanuel.grumbach@intel.com I've listed the people who directly contributed code, but many others from various teams have contributed in other ways. Co-developed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Co-developed-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Avraham Stern <avraham.stern@intel.com> Co-developed-by: Daniel Gabay <daniel.gabay@intel.com> Signed-off-by: Daniel Gabay <daniel.gabay@intel.com> Co-developed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Co-developed-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com> Signed-off-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com> Co-developed-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com> Signed-off-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com> Co-developed-by: Benjamin Berg <benjamin.berg@intel.com> Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Co-developed-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://lore.kernel.org/linux-wireless/20250216094321.537988-1-miriam.rachel.korenblit@intel.com/ [fix Kconfig, fix api/phy.h includes, SPDX tag and coding style issues, duplicated includes per 0-day robot] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-02-16 11:42:40 +02:00
static const u8 no_reclaim_cmds[] = {TX_CMD};
struct iwl_trans *trans = mld->trans;
u32 eckv_value;
wifi: iwlwifi: add iwlmld sub-driver iwlwifi is the driver of all Intel wifi devices since 2008. Since then, the hardware has changed a lot, but the firmware API has changed even more. The need to keep one driver that supports all those different APIs led us to introduce a new architecture circa 2012 which allowed us to keep the same interface to the hardware (DMAs, Tx queues, etc...) with a new layer to implement the mid-layer between mac80211 and the firmware. The first component is called the 'transport' and the latter is called 'operation_mode' a.k.a op_mode. In 2013 we took advantage of the new architecture to introduce iwlmvm which allowed us to implement the, then, new firmware API. This op_mode supports 7260 and up, those devices supports support at least VHT. Since then, wifi evolved and so did the firmware. It became much bigger and took a lot of functionality from the driver. It became increasingly hard to keep the same op_mode for the newest devices and we experienced frequent regressions on older devices. In order to avoid those regressions and keep the code maintainable, we decided it was about time to start a new op_mode. iwlmld is a new op_mode that supports BE200 or newer if the firmware being used is 97.ucode or newer. If the user has an older devices or BE200 with .96.ucode, iwlmvm will be loaded. Of course, this op_mode selection is seamless. All the features supported in iwlmvm are supported in iwlmld besides a few seldom used use cases: injection and Hotspot 2.0. Those are under work. A few points about the implementation: * iwlmld doesn't have any mutexes, it relies on the wiphy_lock * iwlmld is more "resource oriented": stations, links and interfaces are allocated and freed only after all the relevant flows are completed. * Firmware notifications' sizes are validated in a more structured way. We would love to see this new op_mode merged in 6.15. The firmware for this new driver (.97.ucode) is not yet publicly available but it'll be sent very soon. People eager to get an early version of this firmware can contact Emmanuel at: emmanuel.grumbach@intel.com I've listed the people who directly contributed code, but many others from various teams have contributed in other ways. Co-developed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Co-developed-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Avraham Stern <avraham.stern@intel.com> Co-developed-by: Daniel Gabay <daniel.gabay@intel.com> Signed-off-by: Daniel Gabay <daniel.gabay@intel.com> Co-developed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Co-developed-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com> Signed-off-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com> Co-developed-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com> Signed-off-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com> Co-developed-by: Benjamin Berg <benjamin.berg@intel.com> Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Co-developed-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://lore.kernel.org/linux-wireless/20250216094321.537988-1-miriam.rachel.korenblit@intel.com/ [fix Kconfig, fix api/phy.h includes, SPDX tag and coding style issues, duplicated includes per 0-day robot] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-02-16 11:42:40 +02:00
iwl_bios_setup_step(trans, &mld->fwrt);
iwl_uefi_get_step_table(trans);
if (iwl_bios_get_eckv(&mld->fwrt, &eckv_value))
IWL_DEBUG_RADIO(mld, "ECKV table doesn't exist in BIOS\n");
else
trans->conf.ext_32khz_clock_valid = !!eckv_value;
trans->conf.rx_buf_size = iwl_amsdu_size_to_rxb_size();
trans->conf.command_groups = iwl_mld_groups;
trans->conf.command_groups_size = ARRAY_SIZE(iwl_mld_groups);
trans->conf.fw_reset_handshake = true;
trans->conf.queue_alloc_cmd_ver =
iwl_fw_lookup_cmd_ver(mld->fw, WIDE_ID(DATA_PATH_GROUP,
SCD_QUEUE_CONFIG_CMD),
0);
trans->conf.cb_data_offs = offsetof(struct ieee80211_tx_info,
driver_data[2]);
BUILD_BUG_ON(sizeof(no_reclaim_cmds) >
sizeof(trans->conf.no_reclaim_cmds));
memcpy(trans->conf.no_reclaim_cmds, no_reclaim_cmds,
sizeof(no_reclaim_cmds));
trans->conf.n_no_reclaim_cmds = ARRAY_SIZE(no_reclaim_cmds);
trans->conf.rx_mpdu_cmd = REPLY_RX_MPDU_CMD;
trans->conf.rx_mpdu_cmd_hdr_size = sizeof(struct iwl_rx_mpdu_desc);
trans->conf.wide_cmd_header = true;
iwl_trans_op_mode_enter(trans, op_mode);
wifi: iwlwifi: add iwlmld sub-driver iwlwifi is the driver of all Intel wifi devices since 2008. Since then, the hardware has changed a lot, but the firmware API has changed even more. The need to keep one driver that supports all those different APIs led us to introduce a new architecture circa 2012 which allowed us to keep the same interface to the hardware (DMAs, Tx queues, etc...) with a new layer to implement the mid-layer between mac80211 and the firmware. The first component is called the 'transport' and the latter is called 'operation_mode' a.k.a op_mode. In 2013 we took advantage of the new architecture to introduce iwlmvm which allowed us to implement the, then, new firmware API. This op_mode supports 7260 and up, those devices supports support at least VHT. Since then, wifi evolved and so did the firmware. It became much bigger and took a lot of functionality from the driver. It became increasingly hard to keep the same op_mode for the newest devices and we experienced frequent regressions on older devices. In order to avoid those regressions and keep the code maintainable, we decided it was about time to start a new op_mode. iwlmld is a new op_mode that supports BE200 or newer if the firmware being used is 97.ucode or newer. If the user has an older devices or BE200 with .96.ucode, iwlmvm will be loaded. Of course, this op_mode selection is seamless. All the features supported in iwlmvm are supported in iwlmld besides a few seldom used use cases: injection and Hotspot 2.0. Those are under work. A few points about the implementation: * iwlmld doesn't have any mutexes, it relies on the wiphy_lock * iwlmld is more "resource oriented": stations, links and interfaces are allocated and freed only after all the relevant flows are completed. * Firmware notifications' sizes are validated in a more structured way. We would love to see this new op_mode merged in 6.15. The firmware for this new driver (.97.ucode) is not yet publicly available but it'll be sent very soon. People eager to get an early version of this firmware can contact Emmanuel at: emmanuel.grumbach@intel.com I've listed the people who directly contributed code, but many others from various teams have contributed in other ways. Co-developed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Co-developed-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Avraham Stern <avraham.stern@intel.com> Co-developed-by: Daniel Gabay <daniel.gabay@intel.com> Signed-off-by: Daniel Gabay <daniel.gabay@intel.com> Co-developed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Co-developed-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com> Signed-off-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com> Co-developed-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com> Signed-off-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com> Co-developed-by: Benjamin Berg <benjamin.berg@intel.com> Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Co-developed-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://lore.kernel.org/linux-wireless/20250216094321.537988-1-miriam.rachel.korenblit@intel.com/ [fix Kconfig, fix api/phy.h includes, SPDX tag and coding style issues, duplicated includes per 0-day robot] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-02-16 11:42:40 +02:00
}
/*
*****************************************************
* op mode ops functions
*****************************************************
*/
#define NUM_FW_LOAD_RETRIES 3
static struct iwl_op_mode *
iwl_op_mode_mld_start(struct iwl_trans *trans, const struct iwl_rf_cfg *cfg,
wifi: iwlwifi: add iwlmld sub-driver iwlwifi is the driver of all Intel wifi devices since 2008. Since then, the hardware has changed a lot, but the firmware API has changed even more. The need to keep one driver that supports all those different APIs led us to introduce a new architecture circa 2012 which allowed us to keep the same interface to the hardware (DMAs, Tx queues, etc...) with a new layer to implement the mid-layer between mac80211 and the firmware. The first component is called the 'transport' and the latter is called 'operation_mode' a.k.a op_mode. In 2013 we took advantage of the new architecture to introduce iwlmvm which allowed us to implement the, then, new firmware API. This op_mode supports 7260 and up, those devices supports support at least VHT. Since then, wifi evolved and so did the firmware. It became much bigger and took a lot of functionality from the driver. It became increasingly hard to keep the same op_mode for the newest devices and we experienced frequent regressions on older devices. In order to avoid those regressions and keep the code maintainable, we decided it was about time to start a new op_mode. iwlmld is a new op_mode that supports BE200 or newer if the firmware being used is 97.ucode or newer. If the user has an older devices or BE200 with .96.ucode, iwlmvm will be loaded. Of course, this op_mode selection is seamless. All the features supported in iwlmvm are supported in iwlmld besides a few seldom used use cases: injection and Hotspot 2.0. Those are under work. A few points about the implementation: * iwlmld doesn't have any mutexes, it relies on the wiphy_lock * iwlmld is more "resource oriented": stations, links and interfaces are allocated and freed only after all the relevant flows are completed. * Firmware notifications' sizes are validated in a more structured way. We would love to see this new op_mode merged in 6.15. The firmware for this new driver (.97.ucode) is not yet publicly available but it'll be sent very soon. People eager to get an early version of this firmware can contact Emmanuel at: emmanuel.grumbach@intel.com I've listed the people who directly contributed code, but many others from various teams have contributed in other ways. Co-developed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Co-developed-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Avraham Stern <avraham.stern@intel.com> Co-developed-by: Daniel Gabay <daniel.gabay@intel.com> Signed-off-by: Daniel Gabay <daniel.gabay@intel.com> Co-developed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Co-developed-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com> Signed-off-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com> Co-developed-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com> Signed-off-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com> Co-developed-by: Benjamin Berg <benjamin.berg@intel.com> Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Co-developed-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://lore.kernel.org/linux-wireless/20250216094321.537988-1-miriam.rachel.korenblit@intel.com/ [fix Kconfig, fix api/phy.h includes, SPDX tag and coding style issues, duplicated includes per 0-day robot] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-02-16 11:42:40 +02:00
const struct iwl_fw *fw, struct dentry *dbgfs_dir)
{
struct ieee80211_hw *hw;
struct iwl_op_mode *op_mode;
struct iwl_mld *mld;
int ret;
/* Allocate and initialize a new hardware device */
hw = ieee80211_alloc_hw(sizeof(struct iwl_op_mode) +
sizeof(struct iwl_mld),
&iwl_mld_hw_ops);
if (!hw)
return ERR_PTR(-ENOMEM);
op_mode = hw->priv;
op_mode->ops = &iwl_mld_ops;
mld = IWL_OP_MODE_GET_MLD(op_mode);
iwl_construct_mld(mld, trans, cfg, fw, hw, dbgfs_dir);
/* we'll verify later it matches between commands */
mld->fw_rates_ver_3 = iwl_fw_lookup_cmd_ver(mld->fw, TX_CMD, 0) >= 11;
wifi: iwlwifi: add iwlmld sub-driver iwlwifi is the driver of all Intel wifi devices since 2008. Since then, the hardware has changed a lot, but the firmware API has changed even more. The need to keep one driver that supports all those different APIs led us to introduce a new architecture circa 2012 which allowed us to keep the same interface to the hardware (DMAs, Tx queues, etc...) with a new layer to implement the mid-layer between mac80211 and the firmware. The first component is called the 'transport' and the latter is called 'operation_mode' a.k.a op_mode. In 2013 we took advantage of the new architecture to introduce iwlmvm which allowed us to implement the, then, new firmware API. This op_mode supports 7260 and up, those devices supports support at least VHT. Since then, wifi evolved and so did the firmware. It became much bigger and took a lot of functionality from the driver. It became increasingly hard to keep the same op_mode for the newest devices and we experienced frequent regressions on older devices. In order to avoid those regressions and keep the code maintainable, we decided it was about time to start a new op_mode. iwlmld is a new op_mode that supports BE200 or newer if the firmware being used is 97.ucode or newer. If the user has an older devices or BE200 with .96.ucode, iwlmvm will be loaded. Of course, this op_mode selection is seamless. All the features supported in iwlmvm are supported in iwlmld besides a few seldom used use cases: injection and Hotspot 2.0. Those are under work. A few points about the implementation: * iwlmld doesn't have any mutexes, it relies on the wiphy_lock * iwlmld is more "resource oriented": stations, links and interfaces are allocated and freed only after all the relevant flows are completed. * Firmware notifications' sizes are validated in a more structured way. We would love to see this new op_mode merged in 6.15. The firmware for this new driver (.97.ucode) is not yet publicly available but it'll be sent very soon. People eager to get an early version of this firmware can contact Emmanuel at: emmanuel.grumbach@intel.com I've listed the people who directly contributed code, but many others from various teams have contributed in other ways. Co-developed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Co-developed-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Avraham Stern <avraham.stern@intel.com> Co-developed-by: Daniel Gabay <daniel.gabay@intel.com> Signed-off-by: Daniel Gabay <daniel.gabay@intel.com> Co-developed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Co-developed-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com> Signed-off-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com> Co-developed-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com> Signed-off-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com> Co-developed-by: Benjamin Berg <benjamin.berg@intel.com> Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Co-developed-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://lore.kernel.org/linux-wireless/20250216094321.537988-1-miriam.rachel.korenblit@intel.com/ [fix Kconfig, fix api/phy.h includes, SPDX tag and coding style issues, duplicated includes per 0-day robot] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-02-16 11:42:40 +02:00
iwl_mld_construct_fw_runtime(mld, trans, fw, dbgfs_dir);
iwl_mld_get_bios_tables(mld);
iwl_uefi_get_sgom_table(trans, &mld->fwrt);
mld->bios_enable_puncturing = iwl_uefi_get_puncturing(&mld->fwrt);
iwl_mld_hw_set_regulatory(mld);
wifi: iwlwifi: add iwlmld sub-driver iwlwifi is the driver of all Intel wifi devices since 2008. Since then, the hardware has changed a lot, but the firmware API has changed even more. The need to keep one driver that supports all those different APIs led us to introduce a new architecture circa 2012 which allowed us to keep the same interface to the hardware (DMAs, Tx queues, etc...) with a new layer to implement the mid-layer between mac80211 and the firmware. The first component is called the 'transport' and the latter is called 'operation_mode' a.k.a op_mode. In 2013 we took advantage of the new architecture to introduce iwlmvm which allowed us to implement the, then, new firmware API. This op_mode supports 7260 and up, those devices supports support at least VHT. Since then, wifi evolved and so did the firmware. It became much bigger and took a lot of functionality from the driver. It became increasingly hard to keep the same op_mode for the newest devices and we experienced frequent regressions on older devices. In order to avoid those regressions and keep the code maintainable, we decided it was about time to start a new op_mode. iwlmld is a new op_mode that supports BE200 or newer if the firmware being used is 97.ucode or newer. If the user has an older devices or BE200 with .96.ucode, iwlmvm will be loaded. Of course, this op_mode selection is seamless. All the features supported in iwlmvm are supported in iwlmld besides a few seldom used use cases: injection and Hotspot 2.0. Those are under work. A few points about the implementation: * iwlmld doesn't have any mutexes, it relies on the wiphy_lock * iwlmld is more "resource oriented": stations, links and interfaces are allocated and freed only after all the relevant flows are completed. * Firmware notifications' sizes are validated in a more structured way. We would love to see this new op_mode merged in 6.15. The firmware for this new driver (.97.ucode) is not yet publicly available but it'll be sent very soon. People eager to get an early version of this firmware can contact Emmanuel at: emmanuel.grumbach@intel.com I've listed the people who directly contributed code, but many others from various teams have contributed in other ways. Co-developed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Co-developed-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Avraham Stern <avraham.stern@intel.com> Co-developed-by: Daniel Gabay <daniel.gabay@intel.com> Signed-off-by: Daniel Gabay <daniel.gabay@intel.com> Co-developed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Co-developed-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com> Signed-off-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com> Co-developed-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com> Signed-off-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com> Co-developed-by: Benjamin Berg <benjamin.berg@intel.com> Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Co-developed-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://lore.kernel.org/linux-wireless/20250216094321.537988-1-miriam.rachel.korenblit@intel.com/ [fix Kconfig, fix api/phy.h includes, SPDX tag and coding style issues, duplicated includes per 0-day robot] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-02-16 11:42:40 +02:00
/* Configure transport layer with the opmode specific params */
iwl_mld_configure_trans(op_mode);
/* needed for regulatory init */
rtnl_lock();
wifi: iwlwifi: add iwlmld sub-driver iwlwifi is the driver of all Intel wifi devices since 2008. Since then, the hardware has changed a lot, but the firmware API has changed even more. The need to keep one driver that supports all those different APIs led us to introduce a new architecture circa 2012 which allowed us to keep the same interface to the hardware (DMAs, Tx queues, etc...) with a new layer to implement the mid-layer between mac80211 and the firmware. The first component is called the 'transport' and the latter is called 'operation_mode' a.k.a op_mode. In 2013 we took advantage of the new architecture to introduce iwlmvm which allowed us to implement the, then, new firmware API. This op_mode supports 7260 and up, those devices supports support at least VHT. Since then, wifi evolved and so did the firmware. It became much bigger and took a lot of functionality from the driver. It became increasingly hard to keep the same op_mode for the newest devices and we experienced frequent regressions on older devices. In order to avoid those regressions and keep the code maintainable, we decided it was about time to start a new op_mode. iwlmld is a new op_mode that supports BE200 or newer if the firmware being used is 97.ucode or newer. If the user has an older devices or BE200 with .96.ucode, iwlmvm will be loaded. Of course, this op_mode selection is seamless. All the features supported in iwlmvm are supported in iwlmld besides a few seldom used use cases: injection and Hotspot 2.0. Those are under work. A few points about the implementation: * iwlmld doesn't have any mutexes, it relies on the wiphy_lock * iwlmld is more "resource oriented": stations, links and interfaces are allocated and freed only after all the relevant flows are completed. * Firmware notifications' sizes are validated in a more structured way. We would love to see this new op_mode merged in 6.15. The firmware for this new driver (.97.ucode) is not yet publicly available but it'll be sent very soon. People eager to get an early version of this firmware can contact Emmanuel at: emmanuel.grumbach@intel.com I've listed the people who directly contributed code, but many others from various teams have contributed in other ways. Co-developed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Co-developed-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Avraham Stern <avraham.stern@intel.com> Co-developed-by: Daniel Gabay <daniel.gabay@intel.com> Signed-off-by: Daniel Gabay <daniel.gabay@intel.com> Co-developed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Co-developed-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com> Signed-off-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com> Co-developed-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com> Signed-off-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com> Co-developed-by: Benjamin Berg <benjamin.berg@intel.com> Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Co-developed-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://lore.kernel.org/linux-wireless/20250216094321.537988-1-miriam.rachel.korenblit@intel.com/ [fix Kconfig, fix api/phy.h includes, SPDX tag and coding style issues, duplicated includes per 0-day robot] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-02-16 11:42:40 +02:00
/* Needed for sending commands */
wiphy_lock(mld->wiphy);
for (int i = 0; i < NUM_FW_LOAD_RETRIES; i++) {
ret = iwl_mld_load_fw(mld);
if (!ret)
break;
}
if (!ret) {
mld->nvm_data = iwl_get_nvm(mld->trans, mld->fw, 0, 0);
if (IS_ERR(mld->nvm_data)) {
IWL_ERR(mld, "Failed to read NVM: %d\n", ret);
ret = PTR_ERR(mld->nvm_data);
}
}
wifi: iwlwifi: add iwlmld sub-driver iwlwifi is the driver of all Intel wifi devices since 2008. Since then, the hardware has changed a lot, but the firmware API has changed even more. The need to keep one driver that supports all those different APIs led us to introduce a new architecture circa 2012 which allowed us to keep the same interface to the hardware (DMAs, Tx queues, etc...) with a new layer to implement the mid-layer between mac80211 and the firmware. The first component is called the 'transport' and the latter is called 'operation_mode' a.k.a op_mode. In 2013 we took advantage of the new architecture to introduce iwlmvm which allowed us to implement the, then, new firmware API. This op_mode supports 7260 and up, those devices supports support at least VHT. Since then, wifi evolved and so did the firmware. It became much bigger and took a lot of functionality from the driver. It became increasingly hard to keep the same op_mode for the newest devices and we experienced frequent regressions on older devices. In order to avoid those regressions and keep the code maintainable, we decided it was about time to start a new op_mode. iwlmld is a new op_mode that supports BE200 or newer if the firmware being used is 97.ucode or newer. If the user has an older devices or BE200 with .96.ucode, iwlmvm will be loaded. Of course, this op_mode selection is seamless. All the features supported in iwlmvm are supported in iwlmld besides a few seldom used use cases: injection and Hotspot 2.0. Those are under work. A few points about the implementation: * iwlmld doesn't have any mutexes, it relies on the wiphy_lock * iwlmld is more "resource oriented": stations, links and interfaces are allocated and freed only after all the relevant flows are completed. * Firmware notifications' sizes are validated in a more structured way. We would love to see this new op_mode merged in 6.15. The firmware for this new driver (.97.ucode) is not yet publicly available but it'll be sent very soon. People eager to get an early version of this firmware can contact Emmanuel at: emmanuel.grumbach@intel.com I've listed the people who directly contributed code, but many others from various teams have contributed in other ways. Co-developed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Co-developed-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Avraham Stern <avraham.stern@intel.com> Co-developed-by: Daniel Gabay <daniel.gabay@intel.com> Signed-off-by: Daniel Gabay <daniel.gabay@intel.com> Co-developed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Co-developed-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com> Signed-off-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com> Co-developed-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com> Signed-off-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com> Co-developed-by: Benjamin Berg <benjamin.berg@intel.com> Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Co-developed-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://lore.kernel.org/linux-wireless/20250216094321.537988-1-miriam.rachel.korenblit@intel.com/ [fix Kconfig, fix api/phy.h includes, SPDX tag and coding style issues, duplicated includes per 0-day robot] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-02-16 11:42:40 +02:00
if (ret) {
wiphy_unlock(mld->wiphy);
rtnl_unlock();
goto err;
wifi: iwlwifi: add iwlmld sub-driver iwlwifi is the driver of all Intel wifi devices since 2008. Since then, the hardware has changed a lot, but the firmware API has changed even more. The need to keep one driver that supports all those different APIs led us to introduce a new architecture circa 2012 which allowed us to keep the same interface to the hardware (DMAs, Tx queues, etc...) with a new layer to implement the mid-layer between mac80211 and the firmware. The first component is called the 'transport' and the latter is called 'operation_mode' a.k.a op_mode. In 2013 we took advantage of the new architecture to introduce iwlmvm which allowed us to implement the, then, new firmware API. This op_mode supports 7260 and up, those devices supports support at least VHT. Since then, wifi evolved and so did the firmware. It became much bigger and took a lot of functionality from the driver. It became increasingly hard to keep the same op_mode for the newest devices and we experienced frequent regressions on older devices. In order to avoid those regressions and keep the code maintainable, we decided it was about time to start a new op_mode. iwlmld is a new op_mode that supports BE200 or newer if the firmware being used is 97.ucode or newer. If the user has an older devices or BE200 with .96.ucode, iwlmvm will be loaded. Of course, this op_mode selection is seamless. All the features supported in iwlmvm are supported in iwlmld besides a few seldom used use cases: injection and Hotspot 2.0. Those are under work. A few points about the implementation: * iwlmld doesn't have any mutexes, it relies on the wiphy_lock * iwlmld is more "resource oriented": stations, links and interfaces are allocated and freed only after all the relevant flows are completed. * Firmware notifications' sizes are validated in a more structured way. We would love to see this new op_mode merged in 6.15. The firmware for this new driver (.97.ucode) is not yet publicly available but it'll be sent very soon. People eager to get an early version of this firmware can contact Emmanuel at: emmanuel.grumbach@intel.com I've listed the people who directly contributed code, but many others from various teams have contributed in other ways. Co-developed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Co-developed-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Avraham Stern <avraham.stern@intel.com> Co-developed-by: Daniel Gabay <daniel.gabay@intel.com> Signed-off-by: Daniel Gabay <daniel.gabay@intel.com> Co-developed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Co-developed-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com> Signed-off-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com> Co-developed-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com> Signed-off-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com> Co-developed-by: Benjamin Berg <benjamin.berg@intel.com> Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Co-developed-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://lore.kernel.org/linux-wireless/20250216094321.537988-1-miriam.rachel.korenblit@intel.com/ [fix Kconfig, fix api/phy.h includes, SPDX tag and coding style issues, duplicated includes per 0-day robot] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-02-16 11:42:40 +02:00
}
/* We are about to stop the FW. Notifications may require an
* operational FW, so handle them all here before we stop.
*/
wiphy_work_flush(mld->wiphy, &mld->async_handlers_wk);
wifi: iwlwifi: add iwlmld sub-driver iwlwifi is the driver of all Intel wifi devices since 2008. Since then, the hardware has changed a lot, but the firmware API has changed even more. The need to keep one driver that supports all those different APIs led us to introduce a new architecture circa 2012 which allowed us to keep the same interface to the hardware (DMAs, Tx queues, etc...) with a new layer to implement the mid-layer between mac80211 and the firmware. The first component is called the 'transport' and the latter is called 'operation_mode' a.k.a op_mode. In 2013 we took advantage of the new architecture to introduce iwlmvm which allowed us to implement the, then, new firmware API. This op_mode supports 7260 and up, those devices supports support at least VHT. Since then, wifi evolved and so did the firmware. It became much bigger and took a lot of functionality from the driver. It became increasingly hard to keep the same op_mode for the newest devices and we experienced frequent regressions on older devices. In order to avoid those regressions and keep the code maintainable, we decided it was about time to start a new op_mode. iwlmld is a new op_mode that supports BE200 or newer if the firmware being used is 97.ucode or newer. If the user has an older devices or BE200 with .96.ucode, iwlmvm will be loaded. Of course, this op_mode selection is seamless. All the features supported in iwlmvm are supported in iwlmld besides a few seldom used use cases: injection and Hotspot 2.0. Those are under work. A few points about the implementation: * iwlmld doesn't have any mutexes, it relies on the wiphy_lock * iwlmld is more "resource oriented": stations, links and interfaces are allocated and freed only after all the relevant flows are completed. * Firmware notifications' sizes are validated in a more structured way. We would love to see this new op_mode merged in 6.15. The firmware for this new driver (.97.ucode) is not yet publicly available but it'll be sent very soon. People eager to get an early version of this firmware can contact Emmanuel at: emmanuel.grumbach@intel.com I've listed the people who directly contributed code, but many others from various teams have contributed in other ways. Co-developed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Co-developed-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Avraham Stern <avraham.stern@intel.com> Co-developed-by: Daniel Gabay <daniel.gabay@intel.com> Signed-off-by: Daniel Gabay <daniel.gabay@intel.com> Co-developed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Co-developed-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com> Signed-off-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com> Co-developed-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com> Signed-off-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com> Co-developed-by: Benjamin Berg <benjamin.berg@intel.com> Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Co-developed-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://lore.kernel.org/linux-wireless/20250216094321.537988-1-miriam.rachel.korenblit@intel.com/ [fix Kconfig, fix api/phy.h includes, SPDX tag and coding style issues, duplicated includes per 0-day robot] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-02-16 11:42:40 +02:00
iwl_mld_stop_fw(mld);
wiphy_unlock(mld->wiphy);
rtnl_unlock();
wifi: iwlwifi: add iwlmld sub-driver iwlwifi is the driver of all Intel wifi devices since 2008. Since then, the hardware has changed a lot, but the firmware API has changed even more. The need to keep one driver that supports all those different APIs led us to introduce a new architecture circa 2012 which allowed us to keep the same interface to the hardware (DMAs, Tx queues, etc...) with a new layer to implement the mid-layer between mac80211 and the firmware. The first component is called the 'transport' and the latter is called 'operation_mode' a.k.a op_mode. In 2013 we took advantage of the new architecture to introduce iwlmvm which allowed us to implement the, then, new firmware API. This op_mode supports 7260 and up, those devices supports support at least VHT. Since then, wifi evolved and so did the firmware. It became much bigger and took a lot of functionality from the driver. It became increasingly hard to keep the same op_mode for the newest devices and we experienced frequent regressions on older devices. In order to avoid those regressions and keep the code maintainable, we decided it was about time to start a new op_mode. iwlmld is a new op_mode that supports BE200 or newer if the firmware being used is 97.ucode or newer. If the user has an older devices or BE200 with .96.ucode, iwlmvm will be loaded. Of course, this op_mode selection is seamless. All the features supported in iwlmvm are supported in iwlmld besides a few seldom used use cases: injection and Hotspot 2.0. Those are under work. A few points about the implementation: * iwlmld doesn't have any mutexes, it relies on the wiphy_lock * iwlmld is more "resource oriented": stations, links and interfaces are allocated and freed only after all the relevant flows are completed. * Firmware notifications' sizes are validated in a more structured way. We would love to see this new op_mode merged in 6.15. The firmware for this new driver (.97.ucode) is not yet publicly available but it'll be sent very soon. People eager to get an early version of this firmware can contact Emmanuel at: emmanuel.grumbach@intel.com I've listed the people who directly contributed code, but many others from various teams have contributed in other ways. Co-developed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Co-developed-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Avraham Stern <avraham.stern@intel.com> Co-developed-by: Daniel Gabay <daniel.gabay@intel.com> Signed-off-by: Daniel Gabay <daniel.gabay@intel.com> Co-developed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Co-developed-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com> Signed-off-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com> Co-developed-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com> Signed-off-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com> Co-developed-by: Benjamin Berg <benjamin.berg@intel.com> Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Co-developed-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://lore.kernel.org/linux-wireless/20250216094321.537988-1-miriam.rachel.korenblit@intel.com/ [fix Kconfig, fix api/phy.h includes, SPDX tag and coding style issues, duplicated includes per 0-day robot] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-02-16 11:42:40 +02:00
ret = iwl_mld_leds_init(mld);
if (ret)
goto free_nvm;
ret = iwl_mld_alloc_scan_cmd(mld);
if (ret)
goto leds_exit;
ret = iwl_mld_low_latency_init(mld);
if (ret)
goto free_scan_cmd;
ret = iwl_mld_register_hw(mld);
if (ret)
goto low_latency_free;
iwl_mld_toggle_tx_ant(mld, &mld->mgmt_tx_ant);
iwl_mld_add_debugfs_files(mld, dbgfs_dir);
iwl_mld_thermal_initialize(mld);
iwl_mld_ptp_init(mld);
return op_mode;
low_latency_free:
iwl_mld_low_latency_free(mld);
free_scan_cmd:
kfree(mld->scan.cmd);
leds_exit:
iwl_mld_leds_exit(mld);
free_nvm:
kfree(mld->nvm_data);
err:
iwl_trans_op_mode_leave(mld->trans);
wifi: iwlwifi: add iwlmld sub-driver iwlwifi is the driver of all Intel wifi devices since 2008. Since then, the hardware has changed a lot, but the firmware API has changed even more. The need to keep one driver that supports all those different APIs led us to introduce a new architecture circa 2012 which allowed us to keep the same interface to the hardware (DMAs, Tx queues, etc...) with a new layer to implement the mid-layer between mac80211 and the firmware. The first component is called the 'transport' and the latter is called 'operation_mode' a.k.a op_mode. In 2013 we took advantage of the new architecture to introduce iwlmvm which allowed us to implement the, then, new firmware API. This op_mode supports 7260 and up, those devices supports support at least VHT. Since then, wifi evolved and so did the firmware. It became much bigger and took a lot of functionality from the driver. It became increasingly hard to keep the same op_mode for the newest devices and we experienced frequent regressions on older devices. In order to avoid those regressions and keep the code maintainable, we decided it was about time to start a new op_mode. iwlmld is a new op_mode that supports BE200 or newer if the firmware being used is 97.ucode or newer. If the user has an older devices or BE200 with .96.ucode, iwlmvm will be loaded. Of course, this op_mode selection is seamless. All the features supported in iwlmvm are supported in iwlmld besides a few seldom used use cases: injection and Hotspot 2.0. Those are under work. A few points about the implementation: * iwlmld doesn't have any mutexes, it relies on the wiphy_lock * iwlmld is more "resource oriented": stations, links and interfaces are allocated and freed only after all the relevant flows are completed. * Firmware notifications' sizes are validated in a more structured way. We would love to see this new op_mode merged in 6.15. The firmware for this new driver (.97.ucode) is not yet publicly available but it'll be sent very soon. People eager to get an early version of this firmware can contact Emmanuel at: emmanuel.grumbach@intel.com I've listed the people who directly contributed code, but many others from various teams have contributed in other ways. Co-developed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Co-developed-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Avraham Stern <avraham.stern@intel.com> Co-developed-by: Daniel Gabay <daniel.gabay@intel.com> Signed-off-by: Daniel Gabay <daniel.gabay@intel.com> Co-developed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Co-developed-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com> Signed-off-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com> Co-developed-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com> Signed-off-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com> Co-developed-by: Benjamin Berg <benjamin.berg@intel.com> Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Co-developed-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://lore.kernel.org/linux-wireless/20250216094321.537988-1-miriam.rachel.korenblit@intel.com/ [fix Kconfig, fix api/phy.h includes, SPDX tag and coding style issues, duplicated includes per 0-day robot] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-02-16 11:42:40 +02:00
ieee80211_free_hw(mld->hw);
return ERR_PTR(ret);
}
static void
iwl_op_mode_mld_stop(struct iwl_op_mode *op_mode)
{
struct iwl_mld *mld = IWL_OP_MODE_GET_MLD(op_mode);
iwl_mld_ptp_remove(mld);
iwl_mld_leds_exit(mld);
iwl_mld_thermal_exit(mld);
wiphy_lock(mld->wiphy);
wifi: iwlwifi: add iwlmld sub-driver iwlwifi is the driver of all Intel wifi devices since 2008. Since then, the hardware has changed a lot, but the firmware API has changed even more. The need to keep one driver that supports all those different APIs led us to introduce a new architecture circa 2012 which allowed us to keep the same interface to the hardware (DMAs, Tx queues, etc...) with a new layer to implement the mid-layer between mac80211 and the firmware. The first component is called the 'transport' and the latter is called 'operation_mode' a.k.a op_mode. In 2013 we took advantage of the new architecture to introduce iwlmvm which allowed us to implement the, then, new firmware API. This op_mode supports 7260 and up, those devices supports support at least VHT. Since then, wifi evolved and so did the firmware. It became much bigger and took a lot of functionality from the driver. It became increasingly hard to keep the same op_mode for the newest devices and we experienced frequent regressions on older devices. In order to avoid those regressions and keep the code maintainable, we decided it was about time to start a new op_mode. iwlmld is a new op_mode that supports BE200 or newer if the firmware being used is 97.ucode or newer. If the user has an older devices or BE200 with .96.ucode, iwlmvm will be loaded. Of course, this op_mode selection is seamless. All the features supported in iwlmvm are supported in iwlmld besides a few seldom used use cases: injection and Hotspot 2.0. Those are under work. A few points about the implementation: * iwlmld doesn't have any mutexes, it relies on the wiphy_lock * iwlmld is more "resource oriented": stations, links and interfaces are allocated and freed only after all the relevant flows are completed. * Firmware notifications' sizes are validated in a more structured way. We would love to see this new op_mode merged in 6.15. The firmware for this new driver (.97.ucode) is not yet publicly available but it'll be sent very soon. People eager to get an early version of this firmware can contact Emmanuel at: emmanuel.grumbach@intel.com I've listed the people who directly contributed code, but many others from various teams have contributed in other ways. Co-developed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Co-developed-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Avraham Stern <avraham.stern@intel.com> Co-developed-by: Daniel Gabay <daniel.gabay@intel.com> Signed-off-by: Daniel Gabay <daniel.gabay@intel.com> Co-developed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Co-developed-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com> Signed-off-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com> Co-developed-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com> Signed-off-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com> Co-developed-by: Benjamin Berg <benjamin.berg@intel.com> Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Co-developed-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://lore.kernel.org/linux-wireless/20250216094321.537988-1-miriam.rachel.korenblit@intel.com/ [fix Kconfig, fix api/phy.h includes, SPDX tag and coding style issues, duplicated includes per 0-day robot] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-02-16 11:42:40 +02:00
iwl_mld_low_latency_stop(mld);
iwl_mld_deinit_time_sync(mld);
wiphy_unlock(mld->wiphy);
ieee80211_unregister_hw(mld->hw);
iwl_fw_runtime_free(&mld->fwrt);
iwl_mld_low_latency_free(mld);
iwl_trans_op_mode_leave(mld->trans);
kfree(mld->nvm_data);
kfree(mld->scan.cmd);
kfree(mld->channel_survey);
wifi: iwlwifi: add iwlmld sub-driver iwlwifi is the driver of all Intel wifi devices since 2008. Since then, the hardware has changed a lot, but the firmware API has changed even more. The need to keep one driver that supports all those different APIs led us to introduce a new architecture circa 2012 which allowed us to keep the same interface to the hardware (DMAs, Tx queues, etc...) with a new layer to implement the mid-layer between mac80211 and the firmware. The first component is called the 'transport' and the latter is called 'operation_mode' a.k.a op_mode. In 2013 we took advantage of the new architecture to introduce iwlmvm which allowed us to implement the, then, new firmware API. This op_mode supports 7260 and up, those devices supports support at least VHT. Since then, wifi evolved and so did the firmware. It became much bigger and took a lot of functionality from the driver. It became increasingly hard to keep the same op_mode for the newest devices and we experienced frequent regressions on older devices. In order to avoid those regressions and keep the code maintainable, we decided it was about time to start a new op_mode. iwlmld is a new op_mode that supports BE200 or newer if the firmware being used is 97.ucode or newer. If the user has an older devices or BE200 with .96.ucode, iwlmvm will be loaded. Of course, this op_mode selection is seamless. All the features supported in iwlmvm are supported in iwlmld besides a few seldom used use cases: injection and Hotspot 2.0. Those are under work. A few points about the implementation: * iwlmld doesn't have any mutexes, it relies on the wiphy_lock * iwlmld is more "resource oriented": stations, links and interfaces are allocated and freed only after all the relevant flows are completed. * Firmware notifications' sizes are validated in a more structured way. We would love to see this new op_mode merged in 6.15. The firmware for this new driver (.97.ucode) is not yet publicly available but it'll be sent very soon. People eager to get an early version of this firmware can contact Emmanuel at: emmanuel.grumbach@intel.com I've listed the people who directly contributed code, but many others from various teams have contributed in other ways. Co-developed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Co-developed-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Avraham Stern <avraham.stern@intel.com> Co-developed-by: Daniel Gabay <daniel.gabay@intel.com> Signed-off-by: Daniel Gabay <daniel.gabay@intel.com> Co-developed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Co-developed-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com> Signed-off-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com> Co-developed-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com> Signed-off-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com> Co-developed-by: Benjamin Berg <benjamin.berg@intel.com> Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Co-developed-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://lore.kernel.org/linux-wireless/20250216094321.537988-1-miriam.rachel.korenblit@intel.com/ [fix Kconfig, fix api/phy.h includes, SPDX tag and coding style issues, duplicated includes per 0-day robot] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-02-16 11:42:40 +02:00
kfree(mld->error_recovery_buf);
kfree(mld->mcast_filter_cmd);
ieee80211_free_hw(mld->hw);
}
static void iwl_mld_queue_state_change(struct iwl_op_mode *op_mode,
int hw_queue, bool queue_full)
{
struct iwl_mld *mld = IWL_OP_MODE_GET_MLD(op_mode);
struct ieee80211_txq *txq;
struct iwl_mld_sta *mld_sta;
struct iwl_mld_txq *mld_txq;
rcu_read_lock();
txq = rcu_dereference(mld->fw_id_to_txq[hw_queue]);
if (!txq) {
rcu_read_unlock();
if (queue_full) {
/* An internal queue is not expected to become full */
IWL_WARN(mld,
"Internal hw_queue %d is full! stopping all queues\n",
hw_queue);
/* Stop all queues, as an internal queue is not
* mapped to a mac80211 one
*/
ieee80211_stop_queues(mld->hw);
} else {
ieee80211_wake_queues(mld->hw);
}
return;
}
mld_txq = iwl_mld_txq_from_mac80211(txq);
mld_sta = txq->sta ? iwl_mld_sta_from_mac80211(txq->sta) : NULL;
mld_txq->status.stop_full = queue_full;
if (!queue_full && mld_sta &&
mld_sta->sta_state != IEEE80211_STA_NOTEXIST) {
local_bh_disable();
iwl_mld_tx_from_txq(mld, txq);
local_bh_enable();
}
rcu_read_unlock();
}
static void
iwl_mld_queue_full(struct iwl_op_mode *op_mode, int hw_queue)
{
iwl_mld_queue_state_change(op_mode, hw_queue, true);
}
static void
iwl_mld_queue_not_full(struct iwl_op_mode *op_mode, int hw_queue)
{
iwl_mld_queue_state_change(op_mode, hw_queue, false);
}
static bool
iwl_mld_set_hw_rfkill_state(struct iwl_op_mode *op_mode, bool state)
{
struct iwl_mld *mld = IWL_OP_MODE_GET_MLD(op_mode);
iwl_mld_set_hwkill(mld, state);
return false;
}
static void
iwl_mld_free_skb(struct iwl_op_mode *op_mode, struct sk_buff *skb)
{
struct iwl_mld *mld = IWL_OP_MODE_GET_MLD(op_mode);
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
iwl_trans_free_tx_cmd(mld->trans, info->driver_data[1]);
ieee80211_free_txskb(mld->hw, skb);
}
static void iwl_mld_read_error_recovery_buffer(struct iwl_mld *mld)
{
u32 src_size = mld->fw->ucode_capa.error_log_size;
u32 src_addr = mld->fw->ucode_capa.error_log_addr;
u8 *recovery_buf;
int ret;
/* no recovery buffer size defined in a TLV */
if (!src_size)
return;
recovery_buf = kzalloc(src_size, GFP_ATOMIC);
if (!recovery_buf)
return;
ret = iwl_trans_read_mem_bytes(mld->trans, src_addr,
recovery_buf, src_size);
if (ret) {
IWL_ERR(mld, "Failed to read error recovery buffer (%d)\n",
ret);
kfree(recovery_buf);
return;
}
mld->error_recovery_buf = recovery_buf;
}
static void iwl_mld_restart_nic(struct iwl_mld *mld)
{
iwl_mld_read_error_recovery_buffer(mld);
mld->fwrt.trans->dbg.restart_required = false;
ieee80211_restart_hw(mld->hw);
}
static void
iwl_mld_nic_error(struct iwl_op_mode *op_mode,
enum iwl_fw_error_type type)
{
struct iwl_mld *mld = IWL_OP_MODE_GET_MLD(op_mode);
bool trans_dead = iwl_trans_is_dead(mld->trans);
wifi: iwlwifi: add iwlmld sub-driver iwlwifi is the driver of all Intel wifi devices since 2008. Since then, the hardware has changed a lot, but the firmware API has changed even more. The need to keep one driver that supports all those different APIs led us to introduce a new architecture circa 2012 which allowed us to keep the same interface to the hardware (DMAs, Tx queues, etc...) with a new layer to implement the mid-layer between mac80211 and the firmware. The first component is called the 'transport' and the latter is called 'operation_mode' a.k.a op_mode. In 2013 we took advantage of the new architecture to introduce iwlmvm which allowed us to implement the, then, new firmware API. This op_mode supports 7260 and up, those devices supports support at least VHT. Since then, wifi evolved and so did the firmware. It became much bigger and took a lot of functionality from the driver. It became increasingly hard to keep the same op_mode for the newest devices and we experienced frequent regressions on older devices. In order to avoid those regressions and keep the code maintainable, we decided it was about time to start a new op_mode. iwlmld is a new op_mode that supports BE200 or newer if the firmware being used is 97.ucode or newer. If the user has an older devices or BE200 with .96.ucode, iwlmvm will be loaded. Of course, this op_mode selection is seamless. All the features supported in iwlmvm are supported in iwlmld besides a few seldom used use cases: injection and Hotspot 2.0. Those are under work. A few points about the implementation: * iwlmld doesn't have any mutexes, it relies on the wiphy_lock * iwlmld is more "resource oriented": stations, links and interfaces are allocated and freed only after all the relevant flows are completed. * Firmware notifications' sizes are validated in a more structured way. We would love to see this new op_mode merged in 6.15. The firmware for this new driver (.97.ucode) is not yet publicly available but it'll be sent very soon. People eager to get an early version of this firmware can contact Emmanuel at: emmanuel.grumbach@intel.com I've listed the people who directly contributed code, but many others from various teams have contributed in other ways. Co-developed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Co-developed-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Avraham Stern <avraham.stern@intel.com> Co-developed-by: Daniel Gabay <daniel.gabay@intel.com> Signed-off-by: Daniel Gabay <daniel.gabay@intel.com> Co-developed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Co-developed-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com> Signed-off-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com> Co-developed-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com> Signed-off-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com> Co-developed-by: Benjamin Berg <benjamin.berg@intel.com> Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Co-developed-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://lore.kernel.org/linux-wireless/20250216094321.537988-1-miriam.rachel.korenblit@intel.com/ [fix Kconfig, fix api/phy.h includes, SPDX tag and coding style issues, duplicated includes per 0-day robot] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-02-16 11:42:40 +02:00
if (type == IWL_ERR_TYPE_CMD_QUEUE_FULL)
IWL_ERR(mld, "Command queue full!\n");
else if (!trans_dead && !mld->fw_status.do_not_dump_once)
iwl_fwrt_dump_error_logs(&mld->fwrt);
mld->fw_status.do_not_dump_once = false;
/* It is necessary to abort any os scan here because mac80211 requires
* having the scan cleared before restarting.
* We'll reset the scan_status to NONE in restart cleanup in
* the next drv_start() call from mac80211. If ieee80211_hw_restart
* isn't called scan status will stay busy.
*/
iwl_mld_report_scan_aborted(mld);
/*
* This should be first thing before trying to collect any
* data to avoid endless loops if any HW error happens while
* collecting debug data.
* It might not actually be true that we'll restart, but the
* setting doesn't matter if we're going to be unbound either.
*/
if (type != IWL_ERR_TYPE_RESET_HS_TIMEOUT &&
mld->fw_status.running)
wifi: iwlwifi: add iwlmld sub-driver iwlwifi is the driver of all Intel wifi devices since 2008. Since then, the hardware has changed a lot, but the firmware API has changed even more. The need to keep one driver that supports all those different APIs led us to introduce a new architecture circa 2012 which allowed us to keep the same interface to the hardware (DMAs, Tx queues, etc...) with a new layer to implement the mid-layer between mac80211 and the firmware. The first component is called the 'transport' and the latter is called 'operation_mode' a.k.a op_mode. In 2013 we took advantage of the new architecture to introduce iwlmvm which allowed us to implement the, then, new firmware API. This op_mode supports 7260 and up, those devices supports support at least VHT. Since then, wifi evolved and so did the firmware. It became much bigger and took a lot of functionality from the driver. It became increasingly hard to keep the same op_mode for the newest devices and we experienced frequent regressions on older devices. In order to avoid those regressions and keep the code maintainable, we decided it was about time to start a new op_mode. iwlmld is a new op_mode that supports BE200 or newer if the firmware being used is 97.ucode or newer. If the user has an older devices or BE200 with .96.ucode, iwlmvm will be loaded. Of course, this op_mode selection is seamless. All the features supported in iwlmvm are supported in iwlmld besides a few seldom used use cases: injection and Hotspot 2.0. Those are under work. A few points about the implementation: * iwlmld doesn't have any mutexes, it relies on the wiphy_lock * iwlmld is more "resource oriented": stations, links and interfaces are allocated and freed only after all the relevant flows are completed. * Firmware notifications' sizes are validated in a more structured way. We would love to see this new op_mode merged in 6.15. The firmware for this new driver (.97.ucode) is not yet publicly available but it'll be sent very soon. People eager to get an early version of this firmware can contact Emmanuel at: emmanuel.grumbach@intel.com I've listed the people who directly contributed code, but many others from various teams have contributed in other ways. Co-developed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Co-developed-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Avraham Stern <avraham.stern@intel.com> Co-developed-by: Daniel Gabay <daniel.gabay@intel.com> Signed-off-by: Daniel Gabay <daniel.gabay@intel.com> Co-developed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Co-developed-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com> Signed-off-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com> Co-developed-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com> Signed-off-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com> Co-developed-by: Benjamin Berg <benjamin.berg@intel.com> Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Co-developed-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://lore.kernel.org/linux-wireless/20250216094321.537988-1-miriam.rachel.korenblit@intel.com/ [fix Kconfig, fix api/phy.h includes, SPDX tag and coding style issues, duplicated includes per 0-day robot] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-02-16 11:42:40 +02:00
mld->fw_status.in_hw_restart = true;
}
static void iwl_mld_dump_error(struct iwl_op_mode *op_mode,
struct iwl_fw_error_dump_mode *mode)
{
struct iwl_mld *mld = IWL_OP_MODE_GET_MLD(op_mode);
/* if we come in from opmode we have the mutex held */
if (mode->context == IWL_ERR_CONTEXT_FROM_OPMODE) {
lockdep_assert_wiphy(mld->wiphy);
iwl_fw_error_collect(&mld->fwrt);
} else {
wiphy_lock(mld->wiphy);
if (mode->context != IWL_ERR_CONTEXT_ABORT)
iwl_fw_error_collect(&mld->fwrt);
wiphy_unlock(mld->wiphy);
}
}
static bool iwl_mld_sw_reset(struct iwl_op_mode *op_mode,
enum iwl_fw_error_type type)
{
struct iwl_mld *mld = IWL_OP_MODE_GET_MLD(op_mode);
/* SW reset can happen for TOP error w/o NIC error, so
* also abort scan here and set in_hw_restart, when we
* had a NIC error both were already done.
*/
iwl_mld_report_scan_aborted(mld);
mld->fw_status.in_hw_restart = true;
wifi: iwlwifi: add iwlmld sub-driver iwlwifi is the driver of all Intel wifi devices since 2008. Since then, the hardware has changed a lot, but the firmware API has changed even more. The need to keep one driver that supports all those different APIs led us to introduce a new architecture circa 2012 which allowed us to keep the same interface to the hardware (DMAs, Tx queues, etc...) with a new layer to implement the mid-layer between mac80211 and the firmware. The first component is called the 'transport' and the latter is called 'operation_mode' a.k.a op_mode. In 2013 we took advantage of the new architecture to introduce iwlmvm which allowed us to implement the, then, new firmware API. This op_mode supports 7260 and up, those devices supports support at least VHT. Since then, wifi evolved and so did the firmware. It became much bigger and took a lot of functionality from the driver. It became increasingly hard to keep the same op_mode for the newest devices and we experienced frequent regressions on older devices. In order to avoid those regressions and keep the code maintainable, we decided it was about time to start a new op_mode. iwlmld is a new op_mode that supports BE200 or newer if the firmware being used is 97.ucode or newer. If the user has an older devices or BE200 with .96.ucode, iwlmvm will be loaded. Of course, this op_mode selection is seamless. All the features supported in iwlmvm are supported in iwlmld besides a few seldom used use cases: injection and Hotspot 2.0. Those are under work. A few points about the implementation: * iwlmld doesn't have any mutexes, it relies on the wiphy_lock * iwlmld is more "resource oriented": stations, links and interfaces are allocated and freed only after all the relevant flows are completed. * Firmware notifications' sizes are validated in a more structured way. We would love to see this new op_mode merged in 6.15. The firmware for this new driver (.97.ucode) is not yet publicly available but it'll be sent very soon. People eager to get an early version of this firmware can contact Emmanuel at: emmanuel.grumbach@intel.com I've listed the people who directly contributed code, but many others from various teams have contributed in other ways. Co-developed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Co-developed-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Avraham Stern <avraham.stern@intel.com> Co-developed-by: Daniel Gabay <daniel.gabay@intel.com> Signed-off-by: Daniel Gabay <daniel.gabay@intel.com> Co-developed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Co-developed-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com> Signed-off-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com> Co-developed-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com> Signed-off-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com> Co-developed-by: Benjamin Berg <benjamin.berg@intel.com> Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Co-developed-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://lore.kernel.org/linux-wireless/20250216094321.537988-1-miriam.rachel.korenblit@intel.com/ [fix Kconfig, fix api/phy.h includes, SPDX tag and coding style issues, duplicated includes per 0-day robot] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-02-16 11:42:40 +02:00
/* Do restart only in the following conditions are met:
* - we consider the FW as running
* - The trigger that brought us here is defined as one that requires
* a restart (in the debug TLVs)
*/
if (!mld->fw_status.running || !mld->fwrt.trans->dbg.restart_required)
return false;
iwl_mld_restart_nic(mld);
return true;
}
static void
iwl_mld_time_point(struct iwl_op_mode *op_mode,
enum iwl_fw_ini_time_point tp_id,
union iwl_dbg_tlv_tp_data *tp_data)
{
struct iwl_mld *mld = IWL_OP_MODE_GET_MLD(op_mode);
iwl_dbg_tlv_time_point(&mld->fwrt, tp_id, tp_data);
}
#ifdef CONFIG_PM_SLEEP
static void iwl_mld_device_powered_off(struct iwl_op_mode *op_mode)
{
struct iwl_mld *mld = IWL_OP_MODE_GET_MLD(op_mode);
wiphy_lock(mld->wiphy);
iwl_mld_stop_fw(mld);
mld->fw_status.in_d3 = false;
wiphy_unlock(mld->wiphy);
}
#else
static void iwl_mld_device_powered_off(struct iwl_op_mode *op_mode)
{}
#endif
static void iwl_mld_dump(struct iwl_op_mode *op_mode)
{
struct iwl_mld *mld = IWL_OP_MODE_GET_MLD(op_mode);
struct iwl_fw_runtime *fwrt = &mld->fwrt;
if (!iwl_trans_fw_running(fwrt->trans))
return;
iwl_dbg_tlv_time_point(fwrt, IWL_FW_INI_TIME_POINT_USER_TRIGGER, NULL);
}
wifi: iwlwifi: add iwlmld sub-driver iwlwifi is the driver of all Intel wifi devices since 2008. Since then, the hardware has changed a lot, but the firmware API has changed even more. The need to keep one driver that supports all those different APIs led us to introduce a new architecture circa 2012 which allowed us to keep the same interface to the hardware (DMAs, Tx queues, etc...) with a new layer to implement the mid-layer between mac80211 and the firmware. The first component is called the 'transport' and the latter is called 'operation_mode' a.k.a op_mode. In 2013 we took advantage of the new architecture to introduce iwlmvm which allowed us to implement the, then, new firmware API. This op_mode supports 7260 and up, those devices supports support at least VHT. Since then, wifi evolved and so did the firmware. It became much bigger and took a lot of functionality from the driver. It became increasingly hard to keep the same op_mode for the newest devices and we experienced frequent regressions on older devices. In order to avoid those regressions and keep the code maintainable, we decided it was about time to start a new op_mode. iwlmld is a new op_mode that supports BE200 or newer if the firmware being used is 97.ucode or newer. If the user has an older devices or BE200 with .96.ucode, iwlmvm will be loaded. Of course, this op_mode selection is seamless. All the features supported in iwlmvm are supported in iwlmld besides a few seldom used use cases: injection and Hotspot 2.0. Those are under work. A few points about the implementation: * iwlmld doesn't have any mutexes, it relies on the wiphy_lock * iwlmld is more "resource oriented": stations, links and interfaces are allocated and freed only after all the relevant flows are completed. * Firmware notifications' sizes are validated in a more structured way. We would love to see this new op_mode merged in 6.15. The firmware for this new driver (.97.ucode) is not yet publicly available but it'll be sent very soon. People eager to get an early version of this firmware can contact Emmanuel at: emmanuel.grumbach@intel.com I've listed the people who directly contributed code, but many others from various teams have contributed in other ways. Co-developed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Co-developed-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Avraham Stern <avraham.stern@intel.com> Co-developed-by: Daniel Gabay <daniel.gabay@intel.com> Signed-off-by: Daniel Gabay <daniel.gabay@intel.com> Co-developed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Co-developed-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com> Signed-off-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com> Co-developed-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com> Signed-off-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com> Co-developed-by: Benjamin Berg <benjamin.berg@intel.com> Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Co-developed-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://lore.kernel.org/linux-wireless/20250216094321.537988-1-miriam.rachel.korenblit@intel.com/ [fix Kconfig, fix api/phy.h includes, SPDX tag and coding style issues, duplicated includes per 0-day robot] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-02-16 11:42:40 +02:00
static const struct iwl_op_mode_ops iwl_mld_ops = {
.start = iwl_op_mode_mld_start,
.stop = iwl_op_mode_mld_stop,
.rx = iwl_mld_rx,
.rx_rss = iwl_mld_rx_rss,
.queue_full = iwl_mld_queue_full,
.queue_not_full = iwl_mld_queue_not_full,
.hw_rf_kill = iwl_mld_set_hw_rfkill_state,
.free_skb = iwl_mld_free_skb,
.nic_error = iwl_mld_nic_error,
.dump_error = iwl_mld_dump_error,
.sw_reset = iwl_mld_sw_reset,
.time_point = iwl_mld_time_point,
.device_powered_off = pm_sleep_ptr(iwl_mld_device_powered_off),
.dump = iwl_mld_dump,
wifi: iwlwifi: add iwlmld sub-driver iwlwifi is the driver of all Intel wifi devices since 2008. Since then, the hardware has changed a lot, but the firmware API has changed even more. The need to keep one driver that supports all those different APIs led us to introduce a new architecture circa 2012 which allowed us to keep the same interface to the hardware (DMAs, Tx queues, etc...) with a new layer to implement the mid-layer between mac80211 and the firmware. The first component is called the 'transport' and the latter is called 'operation_mode' a.k.a op_mode. In 2013 we took advantage of the new architecture to introduce iwlmvm which allowed us to implement the, then, new firmware API. This op_mode supports 7260 and up, those devices supports support at least VHT. Since then, wifi evolved and so did the firmware. It became much bigger and took a lot of functionality from the driver. It became increasingly hard to keep the same op_mode for the newest devices and we experienced frequent regressions on older devices. In order to avoid those regressions and keep the code maintainable, we decided it was about time to start a new op_mode. iwlmld is a new op_mode that supports BE200 or newer if the firmware being used is 97.ucode or newer. If the user has an older devices or BE200 with .96.ucode, iwlmvm will be loaded. Of course, this op_mode selection is seamless. All the features supported in iwlmvm are supported in iwlmld besides a few seldom used use cases: injection and Hotspot 2.0. Those are under work. A few points about the implementation: * iwlmld doesn't have any mutexes, it relies on the wiphy_lock * iwlmld is more "resource oriented": stations, links and interfaces are allocated and freed only after all the relevant flows are completed. * Firmware notifications' sizes are validated in a more structured way. We would love to see this new op_mode merged in 6.15. The firmware for this new driver (.97.ucode) is not yet publicly available but it'll be sent very soon. People eager to get an early version of this firmware can contact Emmanuel at: emmanuel.grumbach@intel.com I've listed the people who directly contributed code, but many others from various teams have contributed in other ways. Co-developed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Co-developed-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Avraham Stern <avraham.stern@intel.com> Co-developed-by: Daniel Gabay <daniel.gabay@intel.com> Signed-off-by: Daniel Gabay <daniel.gabay@intel.com> Co-developed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Co-developed-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com> Signed-off-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com> Co-developed-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com> Signed-off-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com> Co-developed-by: Benjamin Berg <benjamin.berg@intel.com> Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Co-developed-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://lore.kernel.org/linux-wireless/20250216094321.537988-1-miriam.rachel.korenblit@intel.com/ [fix Kconfig, fix api/phy.h includes, SPDX tag and coding style issues, duplicated includes per 0-day robot] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-02-16 11:42:40 +02:00
};
struct iwl_mld_mod_params iwlmld_mod_params = {
.power_scheme = IWL_POWER_SCHEME_BPS,
};
module_param_named(power_scheme, iwlmld_mod_params.power_scheme, int, 0444);
MODULE_PARM_DESC(power_scheme,
"power management scheme: 1-active, 2-balanced, default: 2");