linux/drivers/net/wireless/ath/ath12k/wow.c

1029 lines
26 KiB
C
Raw Permalink Normal View History

// SPDX-License-Identifier: BSD-3-Clause-Clear
/*
* Copyright (c) 2020 The Linux Foundation. All rights reserved.
* Copyright (c) 2022-2025 Qualcomm Innovation Center, Inc. All rights reserved.
*/
#include <linux/delay.h>
#include <linux/inetdevice.h>
#include <net/addrconf.h>
#include <net/if_inet6.h>
#include <net/ipv6.h>
#include "mac.h"
#include <net/mac80211.h>
#include "core.h"
#include "hif.h"
#include "debug.h"
#include "wmi.h"
#include "wow.h"
static const struct wiphy_wowlan_support ath12k_wowlan_support = {
.flags = WIPHY_WOWLAN_DISCONNECT |
WIPHY_WOWLAN_MAGIC_PKT |
WIPHY_WOWLAN_SUPPORTS_GTK_REKEY |
WIPHY_WOWLAN_GTK_REKEY_FAILURE,
.pattern_min_len = WOW_MIN_PATTERN_SIZE,
.pattern_max_len = WOW_MAX_PATTERN_SIZE,
.max_pkt_offset = WOW_MAX_PKT_OFFSET,
};
wifi: ath12k: prepare vif data structure for MLO handling To prepare the driver for MLO support, split the driver vif data structure to scale for multiple links. This requires changing the use of arvif to per link and not per hw which can now comprise of multiple links. Also since most configurations from mac80211 are done per link, do refactoring of the driver functions to apply these configurations at link level. Split ath12k_vif which is the driver private of ieee80211_vif to store link specific information as ath12k_link_vif. For default use cases the ath12k vif will have a preallocated link vif called deflink which will be used by non ML and the first link vif of ML vif. With MLO support to be added, remaining link vifs will be allocated during channel assignment where vdev create/start happens. These link vifs will be freed during interface down. Current ath12k_vif(arvif) structure +---------------+ +---------------+ +---------------+ | ieee80211_vif | | ieee80211_vif | | ieee80211_vif | | private data | | private data | | private data | | | | | | | | ath12k_vif | | ath12k_vif | | ath12k_vif | | (arvif) | | (arvif) | | (arvif) | | | | | | | | +----------+ | | +----------+ | | +----------+ | | |*ar (2GHz)| | | |*ar (5GHz)| | | |*ar (2GHz)| | | +----------+ | | +----------+ | | +----------+ | | | | | | | +---------------+ +---------------+ +---------------+ The new ath12k_vif (ahvif) containing ath12k_link_vif(s) (arvif) (deflink is preallocated member which is always the first link if ieee80211_vif is MLD and is the only link otherwise): +---------------------------------+ | ieee80211_vif | | private data | | | | ath12k_vif(ahvif) | | | | +-------------------------------+ | |ath12k_link_vif deflink (arvif)| | | +---------------+ | | | | *ar(2GHz) | | | +-------------------------------+ | +-------------------------------+ | | ath12k_link_vif *link (arvif)| | | +---------------+ | | | | *ar(5GHz) | | | +-------------------------------+ | +-------------------------------+ | | ath12k_link_vif *link (arvif)| | | +---------------+ | | | | *ar(6GHz) | | | +-------------------------------+ | | +---------------------------------+ To refactor existing ath12k_vif to make use of link vifs, following changes are made: 1. ath12k_vif now called by variable name ahvif storing multiple arvifs (struct ah12k_link_vif) and also has a back pointer to ieee80211_vif. 2. In this patch set, only deflink is used to be on par with the existing code. When MLO support is added the link id will be used to fetch the arvif. 3. For mac80211 ops which doesn't use specific link_id, the config or info is common for the vif, hence apply the config to all link vifs. The links_map in the ahvif, will be used to identify all the link vifs that are setup. 4. Change ath12k_vif_to_arvif() as ath12k_vif_to_ahvif() to fetch the hw level vif. The link vif can be fetched from ahvif->link[], or the deflink can be accessed via ahvif->deflink. API to access link vif (arvif) by passing link_id can be introduced with MLO Support. 5. The ieee80211_vif can be accessed from ahvif using ath12k_ahvif_to_vif(). The locking continues to use wiphy_lock() for protecting access to most data in struct ath12k&co, there are no changes in that regard. Though struct ath12k_vif::link[] is protected with RCU. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Co-developed-by: Rameshkumar Sundaram <quic_ramess@quicinc.com> Signed-off-by: Rameshkumar Sundaram <quic_ramess@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20241015171416.518022-2-kvalo@kernel.org Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
2024-10-15 20:14:06 +03:00
static inline bool ath12k_wow_is_p2p_vdev(struct ath12k_vif *ahvif)
{
wifi: ath12k: prepare vif data structure for MLO handling To prepare the driver for MLO support, split the driver vif data structure to scale for multiple links. This requires changing the use of arvif to per link and not per hw which can now comprise of multiple links. Also since most configurations from mac80211 are done per link, do refactoring of the driver functions to apply these configurations at link level. Split ath12k_vif which is the driver private of ieee80211_vif to store link specific information as ath12k_link_vif. For default use cases the ath12k vif will have a preallocated link vif called deflink which will be used by non ML and the first link vif of ML vif. With MLO support to be added, remaining link vifs will be allocated during channel assignment where vdev create/start happens. These link vifs will be freed during interface down. Current ath12k_vif(arvif) structure +---------------+ +---------------+ +---------------+ | ieee80211_vif | | ieee80211_vif | | ieee80211_vif | | private data | | private data | | private data | | | | | | | | ath12k_vif | | ath12k_vif | | ath12k_vif | | (arvif) | | (arvif) | | (arvif) | | | | | | | | +----------+ | | +----------+ | | +----------+ | | |*ar (2GHz)| | | |*ar (5GHz)| | | |*ar (2GHz)| | | +----------+ | | +----------+ | | +----------+ | | | | | | | +---------------+ +---------------+ +---------------+ The new ath12k_vif (ahvif) containing ath12k_link_vif(s) (arvif) (deflink is preallocated member which is always the first link if ieee80211_vif is MLD and is the only link otherwise): +---------------------------------+ | ieee80211_vif | | private data | | | | ath12k_vif(ahvif) | | | | +-------------------------------+ | |ath12k_link_vif deflink (arvif)| | | +---------------+ | | | | *ar(2GHz) | | | +-------------------------------+ | +-------------------------------+ | | ath12k_link_vif *link (arvif)| | | +---------------+ | | | | *ar(5GHz) | | | +-------------------------------+ | +-------------------------------+ | | ath12k_link_vif *link (arvif)| | | +---------------+ | | | | *ar(6GHz) | | | +-------------------------------+ | | +---------------------------------+ To refactor existing ath12k_vif to make use of link vifs, following changes are made: 1. ath12k_vif now called by variable name ahvif storing multiple arvifs (struct ah12k_link_vif) and also has a back pointer to ieee80211_vif. 2. In this patch set, only deflink is used to be on par with the existing code. When MLO support is added the link id will be used to fetch the arvif. 3. For mac80211 ops which doesn't use specific link_id, the config or info is common for the vif, hence apply the config to all link vifs. The links_map in the ahvif, will be used to identify all the link vifs that are setup. 4. Change ath12k_vif_to_arvif() as ath12k_vif_to_ahvif() to fetch the hw level vif. The link vif can be fetched from ahvif->link[], or the deflink can be accessed via ahvif->deflink. API to access link vif (arvif) by passing link_id can be introduced with MLO Support. 5. The ieee80211_vif can be accessed from ahvif using ath12k_ahvif_to_vif(). The locking continues to use wiphy_lock() for protecting access to most data in struct ath12k&co, there are no changes in that regard. Though struct ath12k_vif::link[] is protected with RCU. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Co-developed-by: Rameshkumar Sundaram <quic_ramess@quicinc.com> Signed-off-by: Rameshkumar Sundaram <quic_ramess@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20241015171416.518022-2-kvalo@kernel.org Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
2024-10-15 20:14:06 +03:00
return (ahvif->vdev_subtype == WMI_VDEV_SUBTYPE_P2P_DEVICE ||
ahvif->vdev_subtype == WMI_VDEV_SUBTYPE_P2P_CLIENT ||
ahvif->vdev_subtype == WMI_VDEV_SUBTYPE_P2P_GO);
}
int ath12k_wow_enable(struct ath12k *ar)
{
struct ath12k_base *ab = ar->ab;
int i, ret;
clear_bit(ATH12K_FLAG_HTC_SUSPEND_COMPLETE, &ab->dev_flags);
/* The firmware might be busy and it can not enter WoW immediately.
* In that case firmware notifies host with
* ATH12K_HTC_MSG_NACK_SUSPEND message, asking host to try again
* later. Per the firmware team there could be up to 10 loops.
*/
for (i = 0; i < ATH12K_WOW_RETRY_NUM; i++) {
reinit_completion(&ab->htc_suspend);
ret = ath12k_wmi_wow_enable(ar);
if (ret) {
ath12k_warn(ab, "failed to issue wow enable: %d\n", ret);
return ret;
}
ret = wait_for_completion_timeout(&ab->htc_suspend, 3 * HZ);
if (ret == 0) {
ath12k_warn(ab,
"timed out while waiting for htc suspend completion\n");
return -ETIMEDOUT;
}
if (test_bit(ATH12K_FLAG_HTC_SUSPEND_COMPLETE, &ab->dev_flags))
/* success, suspend complete received */
return 0;
ath12k_warn(ab, "htc suspend not complete, retrying (try %d)\n",
i);
msleep(ATH12K_WOW_RETRY_WAIT_MS);
}
ath12k_warn(ab, "htc suspend not complete, failing after %d tries\n", i);
return -ETIMEDOUT;
}
int ath12k_wow_wakeup(struct ath12k *ar)
{
struct ath12k_base *ab = ar->ab;
int ret;
reinit_completion(&ab->wow.wakeup_completed);
ret = ath12k_wmi_wow_host_wakeup_ind(ar);
if (ret) {
ath12k_warn(ab, "failed to send wow wakeup indication: %d\n",
ret);
return ret;
}
ret = wait_for_completion_timeout(&ab->wow.wakeup_completed, 3 * HZ);
if (ret == 0) {
ath12k_warn(ab, "timed out while waiting for wow wakeup completion\n");
return -ETIMEDOUT;
}
return 0;
}
wifi: ath12k: prepare vif data structure for MLO handling To prepare the driver for MLO support, split the driver vif data structure to scale for multiple links. This requires changing the use of arvif to per link and not per hw which can now comprise of multiple links. Also since most configurations from mac80211 are done per link, do refactoring of the driver functions to apply these configurations at link level. Split ath12k_vif which is the driver private of ieee80211_vif to store link specific information as ath12k_link_vif. For default use cases the ath12k vif will have a preallocated link vif called deflink which will be used by non ML and the first link vif of ML vif. With MLO support to be added, remaining link vifs will be allocated during channel assignment where vdev create/start happens. These link vifs will be freed during interface down. Current ath12k_vif(arvif) structure +---------------+ +---------------+ +---------------+ | ieee80211_vif | | ieee80211_vif | | ieee80211_vif | | private data | | private data | | private data | | | | | | | | ath12k_vif | | ath12k_vif | | ath12k_vif | | (arvif) | | (arvif) | | (arvif) | | | | | | | | +----------+ | | +----------+ | | +----------+ | | |*ar (2GHz)| | | |*ar (5GHz)| | | |*ar (2GHz)| | | +----------+ | | +----------+ | | +----------+ | | | | | | | +---------------+ +---------------+ +---------------+ The new ath12k_vif (ahvif) containing ath12k_link_vif(s) (arvif) (deflink is preallocated member which is always the first link if ieee80211_vif is MLD and is the only link otherwise): +---------------------------------+ | ieee80211_vif | | private data | | | | ath12k_vif(ahvif) | | | | +-------------------------------+ | |ath12k_link_vif deflink (arvif)| | | +---------------+ | | | | *ar(2GHz) | | | +-------------------------------+ | +-------------------------------+ | | ath12k_link_vif *link (arvif)| | | +---------------+ | | | | *ar(5GHz) | | | +-------------------------------+ | +-------------------------------+ | | ath12k_link_vif *link (arvif)| | | +---------------+ | | | | *ar(6GHz) | | | +-------------------------------+ | | +---------------------------------+ To refactor existing ath12k_vif to make use of link vifs, following changes are made: 1. ath12k_vif now called by variable name ahvif storing multiple arvifs (struct ah12k_link_vif) and also has a back pointer to ieee80211_vif. 2. In this patch set, only deflink is used to be on par with the existing code. When MLO support is added the link id will be used to fetch the arvif. 3. For mac80211 ops which doesn't use specific link_id, the config or info is common for the vif, hence apply the config to all link vifs. The links_map in the ahvif, will be used to identify all the link vifs that are setup. 4. Change ath12k_vif_to_arvif() as ath12k_vif_to_ahvif() to fetch the hw level vif. The link vif can be fetched from ahvif->link[], or the deflink can be accessed via ahvif->deflink. API to access link vif (arvif) by passing link_id can be introduced with MLO Support. 5. The ieee80211_vif can be accessed from ahvif using ath12k_ahvif_to_vif(). The locking continues to use wiphy_lock() for protecting access to most data in struct ath12k&co, there are no changes in that regard. Though struct ath12k_vif::link[] is protected with RCU. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Co-developed-by: Rameshkumar Sundaram <quic_ramess@quicinc.com> Signed-off-by: Rameshkumar Sundaram <quic_ramess@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20241015171416.518022-2-kvalo@kernel.org Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
2024-10-15 20:14:06 +03:00
static int ath12k_wow_vif_cleanup(struct ath12k_link_vif *arvif)
{
struct ath12k *ar = arvif->ar;
int i, ret;
for (i = 0; i < WOW_EVENT_MAX; i++) {
ret = ath12k_wmi_wow_add_wakeup_event(ar, arvif->vdev_id, i, 0);
if (ret) {
ath12k_warn(ar->ab, "failed to issue wow wakeup for event %s on vdev %i: %d\n",
wow_wakeup_event(i), arvif->vdev_id, ret);
return ret;
}
}
for (i = 0; i < ar->wow.max_num_patterns; i++) {
ret = ath12k_wmi_wow_del_pattern(ar, arvif->vdev_id, i);
if (ret) {
ath12k_warn(ar->ab, "failed to delete wow pattern %d for vdev %i: %d\n",
i, arvif->vdev_id, ret);
return ret;
}
}
return 0;
}
static int ath12k_wow_cleanup(struct ath12k *ar)
{
wifi: ath12k: prepare vif data structure for MLO handling To prepare the driver for MLO support, split the driver vif data structure to scale for multiple links. This requires changing the use of arvif to per link and not per hw which can now comprise of multiple links. Also since most configurations from mac80211 are done per link, do refactoring of the driver functions to apply these configurations at link level. Split ath12k_vif which is the driver private of ieee80211_vif to store link specific information as ath12k_link_vif. For default use cases the ath12k vif will have a preallocated link vif called deflink which will be used by non ML and the first link vif of ML vif. With MLO support to be added, remaining link vifs will be allocated during channel assignment where vdev create/start happens. These link vifs will be freed during interface down. Current ath12k_vif(arvif) structure +---------------+ +---------------+ +---------------+ | ieee80211_vif | | ieee80211_vif | | ieee80211_vif | | private data | | private data | | private data | | | | | | | | ath12k_vif | | ath12k_vif | | ath12k_vif | | (arvif) | | (arvif) | | (arvif) | | | | | | | | +----------+ | | +----------+ | | +----------+ | | |*ar (2GHz)| | | |*ar (5GHz)| | | |*ar (2GHz)| | | +----------+ | | +----------+ | | +----------+ | | | | | | | +---------------+ +---------------+ +---------------+ The new ath12k_vif (ahvif) containing ath12k_link_vif(s) (arvif) (deflink is preallocated member which is always the first link if ieee80211_vif is MLD and is the only link otherwise): +---------------------------------+ | ieee80211_vif | | private data | | | | ath12k_vif(ahvif) | | | | +-------------------------------+ | |ath12k_link_vif deflink (arvif)| | | +---------------+ | | | | *ar(2GHz) | | | +-------------------------------+ | +-------------------------------+ | | ath12k_link_vif *link (arvif)| | | +---------------+ | | | | *ar(5GHz) | | | +-------------------------------+ | +-------------------------------+ | | ath12k_link_vif *link (arvif)| | | +---------------+ | | | | *ar(6GHz) | | | +-------------------------------+ | | +---------------------------------+ To refactor existing ath12k_vif to make use of link vifs, following changes are made: 1. ath12k_vif now called by variable name ahvif storing multiple arvifs (struct ah12k_link_vif) and also has a back pointer to ieee80211_vif. 2. In this patch set, only deflink is used to be on par with the existing code. When MLO support is added the link id will be used to fetch the arvif. 3. For mac80211 ops which doesn't use specific link_id, the config or info is common for the vif, hence apply the config to all link vifs. The links_map in the ahvif, will be used to identify all the link vifs that are setup. 4. Change ath12k_vif_to_arvif() as ath12k_vif_to_ahvif() to fetch the hw level vif. The link vif can be fetched from ahvif->link[], or the deflink can be accessed via ahvif->deflink. API to access link vif (arvif) by passing link_id can be introduced with MLO Support. 5. The ieee80211_vif can be accessed from ahvif using ath12k_ahvif_to_vif(). The locking continues to use wiphy_lock() for protecting access to most data in struct ath12k&co, there are no changes in that regard. Though struct ath12k_vif::link[] is protected with RCU. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Co-developed-by: Rameshkumar Sundaram <quic_ramess@quicinc.com> Signed-off-by: Rameshkumar Sundaram <quic_ramess@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20241015171416.518022-2-kvalo@kernel.org Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
2024-10-15 20:14:06 +03:00
struct ath12k_link_vif *arvif;
int ret;
lockdep_assert_wiphy(ath12k_ar_to_hw(ar)->wiphy);
list_for_each_entry(arvif, &ar->arvifs, list) {
ret = ath12k_wow_vif_cleanup(arvif);
if (ret) {
ath12k_warn(ar->ab, "failed to clean wow wakeups on vdev %i: %d\n",
arvif->vdev_id, ret);
return ret;
}
}
return 0;
}
/* Convert a 802.3 format to a 802.11 format.
* +------------+-----------+--------+----------------+
* 802.3: |dest mac(6B)|src mac(6B)|type(2B)| body... |
* +------------+-----------+--------+----------------+
* |__ |_______ |____________ |________
* | | | |
* +--+------------+----+-----------+---------------+-----------+
* 802.11: |4B|dest mac(6B)| 6B |src mac(6B)| 8B |type(2B)| body... |
* +--+------------+----+-----------+---------------+-----------+
*/
static void
ath12k_wow_convert_8023_to_80211(struct ath12k *ar,
const struct cfg80211_pkt_pattern *eth_pattern,
struct ath12k_pkt_pattern *i80211_pattern)
{
size_t r1042_eth_ofs = offsetof(struct rfc1042_hdr, eth_type);
size_t a1_ofs = offsetof(struct ieee80211_hdr_3addr, addr1);
size_t a3_ofs = offsetof(struct ieee80211_hdr_3addr, addr3);
size_t i80211_hdr_len = sizeof(struct ieee80211_hdr_3addr);
size_t prot_ofs = offsetof(struct ethhdr, h_proto);
size_t src_ofs = offsetof(struct ethhdr, h_source);
u8 eth_bytemask[WOW_MAX_PATTERN_SIZE] = {};
const u8 *eth_pat = eth_pattern->pattern;
size_t eth_pat_len = eth_pattern->pattern_len;
size_t eth_pkt_ofs = eth_pattern->pkt_offset;
u8 *bytemask = i80211_pattern->bytemask;
u8 *pat = i80211_pattern->pattern;
size_t pat_len = 0;
size_t pkt_ofs = 0;
size_t delta;
int i;
/* convert bitmask to bytemask */
for (i = 0; i < eth_pat_len; i++)
if (eth_pattern->mask[i / 8] & BIT(i % 8))
eth_bytemask[i] = 0xff;
if (eth_pkt_ofs < ETH_ALEN) {
pkt_ofs = eth_pkt_ofs + a1_ofs;
wifi: ath12k: fix build vs old compiler gcc 11.4.1-3 warns about memcpy() with overlapping pointers: drivers/net/wireless/ath/ath12k/wow.c: In function ‘ath12k_wow_convert_8023_to_80211.constprop’: ./include/linux/fortify-string.h:114:33: error: ‘__builtin_memcpy’ accessing 18446744073709551611 or more bytes at offsets 0 and 0 overlaps 9223372036854775799 bytes at offset -9223372036854775804 [-Werror=restrict] 114 | #define __underlying_memcpy __builtin_memcpy | ^ ./include/linux/fortify-string.h:637:9: note: in expansion of macro ‘__underlying_memcpy’ 637 | __underlying_##op(p, q, __fortify_size); \ | ^~~~~~~~~~~~~ ./include/linux/fortify-string.h:682:26: note: in expansion of macro ‘__fortify_memcpy_chk’ 682 | #define memcpy(p, q, s) __fortify_memcpy_chk(p, q, s, \ | ^~~~~~~~~~~~~~~~~~~~ drivers/net/wireless/ath/ath12k/wow.c:190:25: note: in expansion of macro ‘memcpy’ 190 | memcpy(pat, eth_pat, eth_pat_len); | ^~~~~~ ./include/linux/fortify-string.h:114:33: error: ‘__builtin_memcpy’ accessing 18446744073709551605 or more bytes at offsets 0 and 0 overlaps 9223372036854775787 bytes at offset -9223372036854775798 [-Werror=restrict] 114 | #define __underlying_memcpy __builtin_memcpy | ^ ./include/linux/fortify-string.h:637:9: note: in expansion of macro ‘__underlying_memcpy’ 637 | __underlying_##op(p, q, __fortify_size); \ | ^~~~~~~~~~~~~ ./include/linux/fortify-string.h:682:26: note: in expansion of macro ‘__fortify_memcpy_chk’ 682 | #define memcpy(p, q, s) __fortify_memcpy_chk(p, q, s, \ | ^~~~~~~~~~~~~~~~~~~~ drivers/net/wireless/ath/ath12k/wow.c:232:25: note: in expansion of macro ‘memcpy’ 232 | memcpy(pat, eth_pat, eth_pat_len); | ^~~~~~ The sum of size_t operands can overflow SIZE_MAX, triggering the warning. Address the issue using the suitable helper. Fixes: 4a3c212eee0e ("wifi: ath12k: add basic WoW functionalities") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Kees Cook <kees@kernel.org> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Link: https://patch.msgid.link/3175f87d7227e395b330fd88fb840c1645084ea7.1721127979.git.pabeni@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-07-16 13:06:39 +02:00
if (size_add(eth_pkt_ofs, eth_pat_len) < ETH_ALEN) {
memcpy(pat, eth_pat, eth_pat_len);
memcpy(bytemask, eth_bytemask, eth_pat_len);
pat_len = eth_pat_len;
} else if (size_add(eth_pkt_ofs, eth_pat_len) < prot_ofs) {
memcpy(pat, eth_pat, ETH_ALEN - eth_pkt_ofs);
memcpy(bytemask, eth_bytemask, ETH_ALEN - eth_pkt_ofs);
delta = eth_pkt_ofs + eth_pat_len - src_ofs;
memcpy(pat + a3_ofs - pkt_ofs,
eth_pat + ETH_ALEN - eth_pkt_ofs,
delta);
memcpy(bytemask + a3_ofs - pkt_ofs,
eth_bytemask + ETH_ALEN - eth_pkt_ofs,
delta);
pat_len = a3_ofs - pkt_ofs + delta;
} else {
memcpy(pat, eth_pat, ETH_ALEN - eth_pkt_ofs);
memcpy(bytemask, eth_bytemask, ETH_ALEN - eth_pkt_ofs);
memcpy(pat + a3_ofs - pkt_ofs,
eth_pat + ETH_ALEN - eth_pkt_ofs,
ETH_ALEN);
memcpy(bytemask + a3_ofs - pkt_ofs,
eth_bytemask + ETH_ALEN - eth_pkt_ofs,
ETH_ALEN);
delta = eth_pkt_ofs + eth_pat_len - prot_ofs;
memcpy(pat + i80211_hdr_len + r1042_eth_ofs - pkt_ofs,
eth_pat + prot_ofs - eth_pkt_ofs,
delta);
memcpy(bytemask + i80211_hdr_len + r1042_eth_ofs - pkt_ofs,
eth_bytemask + prot_ofs - eth_pkt_ofs,
delta);
pat_len = i80211_hdr_len + r1042_eth_ofs - pkt_ofs + delta;
}
} else if (eth_pkt_ofs < prot_ofs) {
pkt_ofs = eth_pkt_ofs - ETH_ALEN + a3_ofs;
wifi: ath12k: fix build vs old compiler gcc 11.4.1-3 warns about memcpy() with overlapping pointers: drivers/net/wireless/ath/ath12k/wow.c: In function ‘ath12k_wow_convert_8023_to_80211.constprop’: ./include/linux/fortify-string.h:114:33: error: ‘__builtin_memcpy’ accessing 18446744073709551611 or more bytes at offsets 0 and 0 overlaps 9223372036854775799 bytes at offset -9223372036854775804 [-Werror=restrict] 114 | #define __underlying_memcpy __builtin_memcpy | ^ ./include/linux/fortify-string.h:637:9: note: in expansion of macro ‘__underlying_memcpy’ 637 | __underlying_##op(p, q, __fortify_size); \ | ^~~~~~~~~~~~~ ./include/linux/fortify-string.h:682:26: note: in expansion of macro ‘__fortify_memcpy_chk’ 682 | #define memcpy(p, q, s) __fortify_memcpy_chk(p, q, s, \ | ^~~~~~~~~~~~~~~~~~~~ drivers/net/wireless/ath/ath12k/wow.c:190:25: note: in expansion of macro ‘memcpy’ 190 | memcpy(pat, eth_pat, eth_pat_len); | ^~~~~~ ./include/linux/fortify-string.h:114:33: error: ‘__builtin_memcpy’ accessing 18446744073709551605 or more bytes at offsets 0 and 0 overlaps 9223372036854775787 bytes at offset -9223372036854775798 [-Werror=restrict] 114 | #define __underlying_memcpy __builtin_memcpy | ^ ./include/linux/fortify-string.h:637:9: note: in expansion of macro ‘__underlying_memcpy’ 637 | __underlying_##op(p, q, __fortify_size); \ | ^~~~~~~~~~~~~ ./include/linux/fortify-string.h:682:26: note: in expansion of macro ‘__fortify_memcpy_chk’ 682 | #define memcpy(p, q, s) __fortify_memcpy_chk(p, q, s, \ | ^~~~~~~~~~~~~~~~~~~~ drivers/net/wireless/ath/ath12k/wow.c:232:25: note: in expansion of macro ‘memcpy’ 232 | memcpy(pat, eth_pat, eth_pat_len); | ^~~~~~ The sum of size_t operands can overflow SIZE_MAX, triggering the warning. Address the issue using the suitable helper. Fixes: 4a3c212eee0e ("wifi: ath12k: add basic WoW functionalities") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Kees Cook <kees@kernel.org> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Link: https://patch.msgid.link/3175f87d7227e395b330fd88fb840c1645084ea7.1721127979.git.pabeni@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-07-16 13:06:39 +02:00
if (size_add(eth_pkt_ofs, eth_pat_len) < prot_ofs) {
memcpy(pat, eth_pat, eth_pat_len);
memcpy(bytemask, eth_bytemask, eth_pat_len);
pat_len = eth_pat_len;
} else {
memcpy(pat, eth_pat, prot_ofs - eth_pkt_ofs);
memcpy(bytemask, eth_bytemask, prot_ofs - eth_pkt_ofs);
delta = eth_pkt_ofs + eth_pat_len - prot_ofs;
memcpy(pat + i80211_hdr_len + r1042_eth_ofs - pkt_ofs,
eth_pat + prot_ofs - eth_pkt_ofs,
delta);
memcpy(bytemask + i80211_hdr_len + r1042_eth_ofs - pkt_ofs,
eth_bytemask + prot_ofs - eth_pkt_ofs,
delta);
pat_len = i80211_hdr_len + r1042_eth_ofs - pkt_ofs + delta;
}
} else {
pkt_ofs = eth_pkt_ofs - prot_ofs + i80211_hdr_len + r1042_eth_ofs;
memcpy(pat, eth_pat, eth_pat_len);
memcpy(bytemask, eth_bytemask, eth_pat_len);
pat_len = eth_pat_len;
}
i80211_pattern->pattern_len = pat_len;
i80211_pattern->pkt_offset = pkt_ofs;
}
static int
ath12k_wow_pno_check_and_convert(struct ath12k *ar, u32 vdev_id,
const struct cfg80211_sched_scan_request *nd_config,
struct wmi_pno_scan_req_arg *pno)
{
int i, j;
u8 ssid_len;
pno->enable = 1;
pno->vdev_id = vdev_id;
pno->uc_networks_count = nd_config->n_match_sets;
if (!pno->uc_networks_count ||
pno->uc_networks_count > WMI_PNO_MAX_SUPP_NETWORKS)
return -EINVAL;
if (nd_config->n_channels > WMI_PNO_MAX_NETW_CHANNELS_EX)
return -EINVAL;
/* Filling per profile params */
for (i = 0; i < pno->uc_networks_count; i++) {
ssid_len = nd_config->match_sets[i].ssid.ssid_len;
if (ssid_len == 0 || ssid_len > 32)
return -EINVAL;
pno->a_networks[i].ssid.ssid_len = ssid_len;
memcpy(pno->a_networks[i].ssid.ssid,
nd_config->match_sets[i].ssid.ssid,
ssid_len);
pno->a_networks[i].authentication = 0;
pno->a_networks[i].encryption = 0;
pno->a_networks[i].bcast_nw_type = 0;
/* Copying list of valid channel into request */
pno->a_networks[i].channel_count = nd_config->n_channels;
pno->a_networks[i].rssi_threshold = nd_config->match_sets[i].rssi_thold;
for (j = 0; j < nd_config->n_channels; j++) {
pno->a_networks[i].channels[j] =
nd_config->channels[j]->center_freq;
}
}
/* set scan to passive if no SSIDs are specified in the request */
if (nd_config->n_ssids == 0)
pno->do_passive_scan = true;
else
pno->do_passive_scan = false;
for (i = 0; i < nd_config->n_ssids; i++) {
for (j = 0; j < pno->uc_networks_count; j++) {
if (pno->a_networks[j].ssid.ssid_len ==
nd_config->ssids[i].ssid_len &&
!memcmp(pno->a_networks[j].ssid.ssid,
nd_config->ssids[i].ssid,
pno->a_networks[j].ssid.ssid_len)) {
pno->a_networks[j].bcast_nw_type = BCAST_HIDDEN;
break;
}
}
}
if (nd_config->n_scan_plans == 2) {
pno->fast_scan_period = nd_config->scan_plans[0].interval * MSEC_PER_SEC;
pno->fast_scan_max_cycles = nd_config->scan_plans[0].iterations;
pno->slow_scan_period =
nd_config->scan_plans[1].interval * MSEC_PER_SEC;
} else if (nd_config->n_scan_plans == 1) {
pno->fast_scan_period = nd_config->scan_plans[0].interval * MSEC_PER_SEC;
pno->fast_scan_max_cycles = 1;
pno->slow_scan_period = nd_config->scan_plans[0].interval * MSEC_PER_SEC;
} else {
ath12k_warn(ar->ab, "Invalid number of PNO scan plans: %d",
nd_config->n_scan_plans);
}
if (nd_config->flags & NL80211_SCAN_FLAG_RANDOM_ADDR) {
/* enable mac randomization */
pno->enable_pno_scan_randomization = 1;
memcpy(pno->mac_addr, nd_config->mac_addr, ETH_ALEN);
memcpy(pno->mac_addr_mask, nd_config->mac_addr_mask, ETH_ALEN);
}
pno->delay_start_time = nd_config->delay;
/* Current FW does not support min-max range for dwell time */
pno->active_max_time = WMI_ACTIVE_MAX_CHANNEL_TIME;
pno->passive_max_time = WMI_PASSIVE_MAX_CHANNEL_TIME;
return 0;
}
wifi: ath12k: prepare vif data structure for MLO handling To prepare the driver for MLO support, split the driver vif data structure to scale for multiple links. This requires changing the use of arvif to per link and not per hw which can now comprise of multiple links. Also since most configurations from mac80211 are done per link, do refactoring of the driver functions to apply these configurations at link level. Split ath12k_vif which is the driver private of ieee80211_vif to store link specific information as ath12k_link_vif. For default use cases the ath12k vif will have a preallocated link vif called deflink which will be used by non ML and the first link vif of ML vif. With MLO support to be added, remaining link vifs will be allocated during channel assignment where vdev create/start happens. These link vifs will be freed during interface down. Current ath12k_vif(arvif) structure +---------------+ +---------------+ +---------------+ | ieee80211_vif | | ieee80211_vif | | ieee80211_vif | | private data | | private data | | private data | | | | | | | | ath12k_vif | | ath12k_vif | | ath12k_vif | | (arvif) | | (arvif) | | (arvif) | | | | | | | | +----------+ | | +----------+ | | +----------+ | | |*ar (2GHz)| | | |*ar (5GHz)| | | |*ar (2GHz)| | | +----------+ | | +----------+ | | +----------+ | | | | | | | +---------------+ +---------------+ +---------------+ The new ath12k_vif (ahvif) containing ath12k_link_vif(s) (arvif) (deflink is preallocated member which is always the first link if ieee80211_vif is MLD and is the only link otherwise): +---------------------------------+ | ieee80211_vif | | private data | | | | ath12k_vif(ahvif) | | | | +-------------------------------+ | |ath12k_link_vif deflink (arvif)| | | +---------------+ | | | | *ar(2GHz) | | | +-------------------------------+ | +-------------------------------+ | | ath12k_link_vif *link (arvif)| | | +---------------+ | | | | *ar(5GHz) | | | +-------------------------------+ | +-------------------------------+ | | ath12k_link_vif *link (arvif)| | | +---------------+ | | | | *ar(6GHz) | | | +-------------------------------+ | | +---------------------------------+ To refactor existing ath12k_vif to make use of link vifs, following changes are made: 1. ath12k_vif now called by variable name ahvif storing multiple arvifs (struct ah12k_link_vif) and also has a back pointer to ieee80211_vif. 2. In this patch set, only deflink is used to be on par with the existing code. When MLO support is added the link id will be used to fetch the arvif. 3. For mac80211 ops which doesn't use specific link_id, the config or info is common for the vif, hence apply the config to all link vifs. The links_map in the ahvif, will be used to identify all the link vifs that are setup. 4. Change ath12k_vif_to_arvif() as ath12k_vif_to_ahvif() to fetch the hw level vif. The link vif can be fetched from ahvif->link[], or the deflink can be accessed via ahvif->deflink. API to access link vif (arvif) by passing link_id can be introduced with MLO Support. 5. The ieee80211_vif can be accessed from ahvif using ath12k_ahvif_to_vif(). The locking continues to use wiphy_lock() for protecting access to most data in struct ath12k&co, there are no changes in that regard. Though struct ath12k_vif::link[] is protected with RCU. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Co-developed-by: Rameshkumar Sundaram <quic_ramess@quicinc.com> Signed-off-by: Rameshkumar Sundaram <quic_ramess@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20241015171416.518022-2-kvalo@kernel.org Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
2024-10-15 20:14:06 +03:00
static int ath12k_wow_vif_set_wakeups(struct ath12k_link_vif *arvif,
struct cfg80211_wowlan *wowlan)
{
const struct cfg80211_pkt_pattern *patterns = wowlan->patterns;
struct ath12k *ar = arvif->ar;
unsigned long wow_mask = 0;
int pattern_id = 0;
wifi: ath12k: fix reusing outside iterator in ath12k_wow_vif_set_wakeups() Smatch throws below warning: drivers/net/wireless/ath/ath12k/wow.c:434 ath12k_wow_vif_set_wakeups() warn: reusing outside iterator: 'i' drivers/net/wireless/ath/ath12k/wow.c 411 default: 412 break; 413 } 414 415 for (i = 0; i < wowlan->n_patterns; i++) { ^^^^^^^^^^^^^^^^^^^^^^ Here we loop until ->n_patterns 416 const struct cfg80211_pkt_pattern *eth_pattern = &patterns[i]; 417 struct ath12k_pkt_pattern new_pattern = {}; 418 419 if (WARN_ON(eth_pattern->pattern_len > WOW_MAX_PATTERN_SIZE)) 420 return -EINVAL; 421 422 if (ar->ab->wow.wmi_conf_rx_decap_mode == 423 ATH12K_HW_TXRX_NATIVE_WIFI) { 424 ath12k_wow_convert_8023_to_80211(ar, eth_pattern, 425 &new_pattern); 426 427 if (WARN_ON(new_pattern.pattern_len > WOW_MAX_PATTERN_SIZE)) 428 return -EINVAL; 429 } else { 430 memcpy(new_pattern.pattern, eth_pattern->pattern, 431 eth_pattern->pattern_len); 432 433 /* convert bitmask to bytemask */ --> 434 for (i = 0; i < eth_pattern->pattern_len; i++) 435 if (eth_pattern->mask[i / 8] & BIT(i % 8)) 436 new_pattern.bytemask[i] = 0xff; This loop re-uses i and the loop ends with i == eth_pattern->pattern_len. This looks like a bug. Change to use a new iterator 'j' for the inner loop to fix it. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 Fixes: 4a3c212eee0e ("wifi: ath12k: add basic WoW functionalities") Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Closes: https://lore.kernel.org/all/d4975b95-9c43-45af-a0ab-80253f18c7f2@stanley.mountain/ Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Link: https://patch.msgid.link/20240722033332.6273-1-quic_bqiang@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-07-22 11:33:32 +08:00
int ret, i, j;
/* Setup requested WOW features */
wifi: ath12k: prepare vif data structure for MLO handling To prepare the driver for MLO support, split the driver vif data structure to scale for multiple links. This requires changing the use of arvif to per link and not per hw which can now comprise of multiple links. Also since most configurations from mac80211 are done per link, do refactoring of the driver functions to apply these configurations at link level. Split ath12k_vif which is the driver private of ieee80211_vif to store link specific information as ath12k_link_vif. For default use cases the ath12k vif will have a preallocated link vif called deflink which will be used by non ML and the first link vif of ML vif. With MLO support to be added, remaining link vifs will be allocated during channel assignment where vdev create/start happens. These link vifs will be freed during interface down. Current ath12k_vif(arvif) structure +---------------+ +---------------+ +---------------+ | ieee80211_vif | | ieee80211_vif | | ieee80211_vif | | private data | | private data | | private data | | | | | | | | ath12k_vif | | ath12k_vif | | ath12k_vif | | (arvif) | | (arvif) | | (arvif) | | | | | | | | +----------+ | | +----------+ | | +----------+ | | |*ar (2GHz)| | | |*ar (5GHz)| | | |*ar (2GHz)| | | +----------+ | | +----------+ | | +----------+ | | | | | | | +---------------+ +---------------+ +---------------+ The new ath12k_vif (ahvif) containing ath12k_link_vif(s) (arvif) (deflink is preallocated member which is always the first link if ieee80211_vif is MLD and is the only link otherwise): +---------------------------------+ | ieee80211_vif | | private data | | | | ath12k_vif(ahvif) | | | | +-------------------------------+ | |ath12k_link_vif deflink (arvif)| | | +---------------+ | | | | *ar(2GHz) | | | +-------------------------------+ | +-------------------------------+ | | ath12k_link_vif *link (arvif)| | | +---------------+ | | | | *ar(5GHz) | | | +-------------------------------+ | +-------------------------------+ | | ath12k_link_vif *link (arvif)| | | +---------------+ | | | | *ar(6GHz) | | | +-------------------------------+ | | +---------------------------------+ To refactor existing ath12k_vif to make use of link vifs, following changes are made: 1. ath12k_vif now called by variable name ahvif storing multiple arvifs (struct ah12k_link_vif) and also has a back pointer to ieee80211_vif. 2. In this patch set, only deflink is used to be on par with the existing code. When MLO support is added the link id will be used to fetch the arvif. 3. For mac80211 ops which doesn't use specific link_id, the config or info is common for the vif, hence apply the config to all link vifs. The links_map in the ahvif, will be used to identify all the link vifs that are setup. 4. Change ath12k_vif_to_arvif() as ath12k_vif_to_ahvif() to fetch the hw level vif. The link vif can be fetched from ahvif->link[], or the deflink can be accessed via ahvif->deflink. API to access link vif (arvif) by passing link_id can be introduced with MLO Support. 5. The ieee80211_vif can be accessed from ahvif using ath12k_ahvif_to_vif(). The locking continues to use wiphy_lock() for protecting access to most data in struct ath12k&co, there are no changes in that regard. Though struct ath12k_vif::link[] is protected with RCU. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Co-developed-by: Rameshkumar Sundaram <quic_ramess@quicinc.com> Signed-off-by: Rameshkumar Sundaram <quic_ramess@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20241015171416.518022-2-kvalo@kernel.org Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
2024-10-15 20:14:06 +03:00
switch (arvif->ahvif->vdev_type) {
case WMI_VDEV_TYPE_IBSS:
__set_bit(WOW_BEACON_EVENT, &wow_mask);
fallthrough;
case WMI_VDEV_TYPE_AP:
__set_bit(WOW_DEAUTH_RECVD_EVENT, &wow_mask);
__set_bit(WOW_DISASSOC_RECVD_EVENT, &wow_mask);
__set_bit(WOW_PROBE_REQ_WPS_IE_EVENT, &wow_mask);
__set_bit(WOW_AUTH_REQ_EVENT, &wow_mask);
__set_bit(WOW_ASSOC_REQ_EVENT, &wow_mask);
__set_bit(WOW_HTT_EVENT, &wow_mask);
__set_bit(WOW_RA_MATCH_EVENT, &wow_mask);
break;
case WMI_VDEV_TYPE_STA:
if (wowlan->disconnect) {
__set_bit(WOW_DEAUTH_RECVD_EVENT, &wow_mask);
__set_bit(WOW_DISASSOC_RECVD_EVENT, &wow_mask);
__set_bit(WOW_BMISS_EVENT, &wow_mask);
__set_bit(WOW_CSA_IE_EVENT, &wow_mask);
}
if (wowlan->magic_pkt)
__set_bit(WOW_MAGIC_PKT_RECVD_EVENT, &wow_mask);
if (wowlan->nd_config) {
struct wmi_pno_scan_req_arg *pno;
int ret;
pno = kzalloc(sizeof(*pno), GFP_KERNEL);
if (!pno)
return -ENOMEM;
ar->nlo_enabled = true;
ret = ath12k_wow_pno_check_and_convert(ar, arvif->vdev_id,
wowlan->nd_config, pno);
if (!ret) {
ath12k_wmi_wow_config_pno(ar, arvif->vdev_id, pno);
__set_bit(WOW_NLO_DETECTED_EVENT, &wow_mask);
}
kfree(pno);
}
break;
default:
break;
}
for (i = 0; i < wowlan->n_patterns; i++) {
const struct cfg80211_pkt_pattern *eth_pattern = &patterns[i];
struct ath12k_pkt_pattern new_pattern = {};
if (WARN_ON(eth_pattern->pattern_len > WOW_MAX_PATTERN_SIZE))
return -EINVAL;
if (ar->ab->wow.wmi_conf_rx_decap_mode ==
ATH12K_HW_TXRX_NATIVE_WIFI) {
ath12k_wow_convert_8023_to_80211(ar, eth_pattern,
&new_pattern);
if (WARN_ON(new_pattern.pattern_len > WOW_MAX_PATTERN_SIZE))
return -EINVAL;
} else {
memcpy(new_pattern.pattern, eth_pattern->pattern,
eth_pattern->pattern_len);
/* convert bitmask to bytemask */
wifi: ath12k: fix reusing outside iterator in ath12k_wow_vif_set_wakeups() Smatch throws below warning: drivers/net/wireless/ath/ath12k/wow.c:434 ath12k_wow_vif_set_wakeups() warn: reusing outside iterator: 'i' drivers/net/wireless/ath/ath12k/wow.c 411 default: 412 break; 413 } 414 415 for (i = 0; i < wowlan->n_patterns; i++) { ^^^^^^^^^^^^^^^^^^^^^^ Here we loop until ->n_patterns 416 const struct cfg80211_pkt_pattern *eth_pattern = &patterns[i]; 417 struct ath12k_pkt_pattern new_pattern = {}; 418 419 if (WARN_ON(eth_pattern->pattern_len > WOW_MAX_PATTERN_SIZE)) 420 return -EINVAL; 421 422 if (ar->ab->wow.wmi_conf_rx_decap_mode == 423 ATH12K_HW_TXRX_NATIVE_WIFI) { 424 ath12k_wow_convert_8023_to_80211(ar, eth_pattern, 425 &new_pattern); 426 427 if (WARN_ON(new_pattern.pattern_len > WOW_MAX_PATTERN_SIZE)) 428 return -EINVAL; 429 } else { 430 memcpy(new_pattern.pattern, eth_pattern->pattern, 431 eth_pattern->pattern_len); 432 433 /* convert bitmask to bytemask */ --> 434 for (i = 0; i < eth_pattern->pattern_len; i++) 435 if (eth_pattern->mask[i / 8] & BIT(i % 8)) 436 new_pattern.bytemask[i] = 0xff; This loop re-uses i and the loop ends with i == eth_pattern->pattern_len. This looks like a bug. Change to use a new iterator 'j' for the inner loop to fix it. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 Fixes: 4a3c212eee0e ("wifi: ath12k: add basic WoW functionalities") Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Closes: https://lore.kernel.org/all/d4975b95-9c43-45af-a0ab-80253f18c7f2@stanley.mountain/ Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Link: https://patch.msgid.link/20240722033332.6273-1-quic_bqiang@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-07-22 11:33:32 +08:00
for (j = 0; j < eth_pattern->pattern_len; j++)
if (eth_pattern->mask[j / 8] & BIT(j % 8))
new_pattern.bytemask[j] = 0xff;
new_pattern.pattern_len = eth_pattern->pattern_len;
new_pattern.pkt_offset = eth_pattern->pkt_offset;
}
ret = ath12k_wmi_wow_add_pattern(ar, arvif->vdev_id,
pattern_id,
new_pattern.pattern,
new_pattern.bytemask,
new_pattern.pattern_len,
new_pattern.pkt_offset);
if (ret) {
ath12k_warn(ar->ab, "failed to add pattern %i to vdev %i: %d\n",
pattern_id,
arvif->vdev_id, ret);
return ret;
}
pattern_id++;
__set_bit(WOW_PATTERN_MATCH_EVENT, &wow_mask);
}
for (i = 0; i < WOW_EVENT_MAX; i++) {
if (!test_bit(i, &wow_mask))
continue;
ret = ath12k_wmi_wow_add_wakeup_event(ar, arvif->vdev_id, i, 1);
if (ret) {
ath12k_warn(ar->ab, "failed to enable wakeup event %s on vdev %i: %d\n",
wow_wakeup_event(i), arvif->vdev_id, ret);
return ret;
}
}
return 0;
}
static int ath12k_wow_set_wakeups(struct ath12k *ar,
struct cfg80211_wowlan *wowlan)
{
wifi: ath12k: prepare vif data structure for MLO handling To prepare the driver for MLO support, split the driver vif data structure to scale for multiple links. This requires changing the use of arvif to per link and not per hw which can now comprise of multiple links. Also since most configurations from mac80211 are done per link, do refactoring of the driver functions to apply these configurations at link level. Split ath12k_vif which is the driver private of ieee80211_vif to store link specific information as ath12k_link_vif. For default use cases the ath12k vif will have a preallocated link vif called deflink which will be used by non ML and the first link vif of ML vif. With MLO support to be added, remaining link vifs will be allocated during channel assignment where vdev create/start happens. These link vifs will be freed during interface down. Current ath12k_vif(arvif) structure +---------------+ +---------------+ +---------------+ | ieee80211_vif | | ieee80211_vif | | ieee80211_vif | | private data | | private data | | private data | | | | | | | | ath12k_vif | | ath12k_vif | | ath12k_vif | | (arvif) | | (arvif) | | (arvif) | | | | | | | | +----------+ | | +----------+ | | +----------+ | | |*ar (2GHz)| | | |*ar (5GHz)| | | |*ar (2GHz)| | | +----------+ | | +----------+ | | +----------+ | | | | | | | +---------------+ +---------------+ +---------------+ The new ath12k_vif (ahvif) containing ath12k_link_vif(s) (arvif) (deflink is preallocated member which is always the first link if ieee80211_vif is MLD and is the only link otherwise): +---------------------------------+ | ieee80211_vif | | private data | | | | ath12k_vif(ahvif) | | | | +-------------------------------+ | |ath12k_link_vif deflink (arvif)| | | +---------------+ | | | | *ar(2GHz) | | | +-------------------------------+ | +-------------------------------+ | | ath12k_link_vif *link (arvif)| | | +---------------+ | | | | *ar(5GHz) | | | +-------------------------------+ | +-------------------------------+ | | ath12k_link_vif *link (arvif)| | | +---------------+ | | | | *ar(6GHz) | | | +-------------------------------+ | | +---------------------------------+ To refactor existing ath12k_vif to make use of link vifs, following changes are made: 1. ath12k_vif now called by variable name ahvif storing multiple arvifs (struct ah12k_link_vif) and also has a back pointer to ieee80211_vif. 2. In this patch set, only deflink is used to be on par with the existing code. When MLO support is added the link id will be used to fetch the arvif. 3. For mac80211 ops which doesn't use specific link_id, the config or info is common for the vif, hence apply the config to all link vifs. The links_map in the ahvif, will be used to identify all the link vifs that are setup. 4. Change ath12k_vif_to_arvif() as ath12k_vif_to_ahvif() to fetch the hw level vif. The link vif can be fetched from ahvif->link[], or the deflink can be accessed via ahvif->deflink. API to access link vif (arvif) by passing link_id can be introduced with MLO Support. 5. The ieee80211_vif can be accessed from ahvif using ath12k_ahvif_to_vif(). The locking continues to use wiphy_lock() for protecting access to most data in struct ath12k&co, there are no changes in that regard. Though struct ath12k_vif::link[] is protected with RCU. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Co-developed-by: Rameshkumar Sundaram <quic_ramess@quicinc.com> Signed-off-by: Rameshkumar Sundaram <quic_ramess@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20241015171416.518022-2-kvalo@kernel.org Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
2024-10-15 20:14:06 +03:00
struct ath12k_link_vif *arvif;
int ret;
lockdep_assert_wiphy(ath12k_ar_to_hw(ar)->wiphy);
list_for_each_entry(arvif, &ar->arvifs, list) {
wifi: ath12k: prepare vif data structure for MLO handling To prepare the driver for MLO support, split the driver vif data structure to scale for multiple links. This requires changing the use of arvif to per link and not per hw which can now comprise of multiple links. Also since most configurations from mac80211 are done per link, do refactoring of the driver functions to apply these configurations at link level. Split ath12k_vif which is the driver private of ieee80211_vif to store link specific information as ath12k_link_vif. For default use cases the ath12k vif will have a preallocated link vif called deflink which will be used by non ML and the first link vif of ML vif. With MLO support to be added, remaining link vifs will be allocated during channel assignment where vdev create/start happens. These link vifs will be freed during interface down. Current ath12k_vif(arvif) structure +---------------+ +---------------+ +---------------+ | ieee80211_vif | | ieee80211_vif | | ieee80211_vif | | private data | | private data | | private data | | | | | | | | ath12k_vif | | ath12k_vif | | ath12k_vif | | (arvif) | | (arvif) | | (arvif) | | | | | | | | +----------+ | | +----------+ | | +----------+ | | |*ar (2GHz)| | | |*ar (5GHz)| | | |*ar (2GHz)| | | +----------+ | | +----------+ | | +----------+ | | | | | | | +---------------+ +---------------+ +---------------+ The new ath12k_vif (ahvif) containing ath12k_link_vif(s) (arvif) (deflink is preallocated member which is always the first link if ieee80211_vif is MLD and is the only link otherwise): +---------------------------------+ | ieee80211_vif | | private data | | | | ath12k_vif(ahvif) | | | | +-------------------------------+ | |ath12k_link_vif deflink (arvif)| | | +---------------+ | | | | *ar(2GHz) | | | +-------------------------------+ | +-------------------------------+ | | ath12k_link_vif *link (arvif)| | | +---------------+ | | | | *ar(5GHz) | | | +-------------------------------+ | +-------------------------------+ | | ath12k_link_vif *link (arvif)| | | +---------------+ | | | | *ar(6GHz) | | | +-------------------------------+ | | +---------------------------------+ To refactor existing ath12k_vif to make use of link vifs, following changes are made: 1. ath12k_vif now called by variable name ahvif storing multiple arvifs (struct ah12k_link_vif) and also has a back pointer to ieee80211_vif. 2. In this patch set, only deflink is used to be on par with the existing code. When MLO support is added the link id will be used to fetch the arvif. 3. For mac80211 ops which doesn't use specific link_id, the config or info is common for the vif, hence apply the config to all link vifs. The links_map in the ahvif, will be used to identify all the link vifs that are setup. 4. Change ath12k_vif_to_arvif() as ath12k_vif_to_ahvif() to fetch the hw level vif. The link vif can be fetched from ahvif->link[], or the deflink can be accessed via ahvif->deflink. API to access link vif (arvif) by passing link_id can be introduced with MLO Support. 5. The ieee80211_vif can be accessed from ahvif using ath12k_ahvif_to_vif(). The locking continues to use wiphy_lock() for protecting access to most data in struct ath12k&co, there are no changes in that regard. Though struct ath12k_vif::link[] is protected with RCU. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Co-developed-by: Rameshkumar Sundaram <quic_ramess@quicinc.com> Signed-off-by: Rameshkumar Sundaram <quic_ramess@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20241015171416.518022-2-kvalo@kernel.org Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
2024-10-15 20:14:06 +03:00
if (ath12k_wow_is_p2p_vdev(arvif->ahvif))
continue;
ret = ath12k_wow_vif_set_wakeups(arvif, wowlan);
if (ret) {
ath12k_warn(ar->ab, "failed to set wow wakeups on vdev %i: %d\n",
arvif->vdev_id, ret);
return ret;
}
}
return 0;
}
static int ath12k_wow_vdev_clean_nlo(struct ath12k *ar, u32 vdev_id)
{
struct wmi_pno_scan_req_arg *pno;
int ret;
if (!ar->nlo_enabled)
return 0;
pno = kzalloc(sizeof(*pno), GFP_KERNEL);
if (!pno)
return -ENOMEM;
pno->enable = 0;
ret = ath12k_wmi_wow_config_pno(ar, vdev_id, pno);
if (ret) {
ath12k_warn(ar->ab, "failed to disable PNO: %d", ret);
goto out;
}
ar->nlo_enabled = false;
out:
kfree(pno);
return ret;
}
wifi: ath12k: prepare vif data structure for MLO handling To prepare the driver for MLO support, split the driver vif data structure to scale for multiple links. This requires changing the use of arvif to per link and not per hw which can now comprise of multiple links. Also since most configurations from mac80211 are done per link, do refactoring of the driver functions to apply these configurations at link level. Split ath12k_vif which is the driver private of ieee80211_vif to store link specific information as ath12k_link_vif. For default use cases the ath12k vif will have a preallocated link vif called deflink which will be used by non ML and the first link vif of ML vif. With MLO support to be added, remaining link vifs will be allocated during channel assignment where vdev create/start happens. These link vifs will be freed during interface down. Current ath12k_vif(arvif) structure +---------------+ +---------------+ +---------------+ | ieee80211_vif | | ieee80211_vif | | ieee80211_vif | | private data | | private data | | private data | | | | | | | | ath12k_vif | | ath12k_vif | | ath12k_vif | | (arvif) | | (arvif) | | (arvif) | | | | | | | | +----------+ | | +----------+ | | +----------+ | | |*ar (2GHz)| | | |*ar (5GHz)| | | |*ar (2GHz)| | | +----------+ | | +----------+ | | +----------+ | | | | | | | +---------------+ +---------------+ +---------------+ The new ath12k_vif (ahvif) containing ath12k_link_vif(s) (arvif) (deflink is preallocated member which is always the first link if ieee80211_vif is MLD and is the only link otherwise): +---------------------------------+ | ieee80211_vif | | private data | | | | ath12k_vif(ahvif) | | | | +-------------------------------+ | |ath12k_link_vif deflink (arvif)| | | +---------------+ | | | | *ar(2GHz) | | | +-------------------------------+ | +-------------------------------+ | | ath12k_link_vif *link (arvif)| | | +---------------+ | | | | *ar(5GHz) | | | +-------------------------------+ | +-------------------------------+ | | ath12k_link_vif *link (arvif)| | | +---------------+ | | | | *ar(6GHz) | | | +-------------------------------+ | | +---------------------------------+ To refactor existing ath12k_vif to make use of link vifs, following changes are made: 1. ath12k_vif now called by variable name ahvif storing multiple arvifs (struct ah12k_link_vif) and also has a back pointer to ieee80211_vif. 2. In this patch set, only deflink is used to be on par with the existing code. When MLO support is added the link id will be used to fetch the arvif. 3. For mac80211 ops which doesn't use specific link_id, the config or info is common for the vif, hence apply the config to all link vifs. The links_map in the ahvif, will be used to identify all the link vifs that are setup. 4. Change ath12k_vif_to_arvif() as ath12k_vif_to_ahvif() to fetch the hw level vif. The link vif can be fetched from ahvif->link[], or the deflink can be accessed via ahvif->deflink. API to access link vif (arvif) by passing link_id can be introduced with MLO Support. 5. The ieee80211_vif can be accessed from ahvif using ath12k_ahvif_to_vif(). The locking continues to use wiphy_lock() for protecting access to most data in struct ath12k&co, there are no changes in that regard. Though struct ath12k_vif::link[] is protected with RCU. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Co-developed-by: Rameshkumar Sundaram <quic_ramess@quicinc.com> Signed-off-by: Rameshkumar Sundaram <quic_ramess@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20241015171416.518022-2-kvalo@kernel.org Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
2024-10-15 20:14:06 +03:00
static int ath12k_wow_vif_clean_nlo(struct ath12k_link_vif *arvif)
{
struct ath12k *ar = arvif->ar;
wifi: ath12k: prepare vif data structure for MLO handling To prepare the driver for MLO support, split the driver vif data structure to scale for multiple links. This requires changing the use of arvif to per link and not per hw which can now comprise of multiple links. Also since most configurations from mac80211 are done per link, do refactoring of the driver functions to apply these configurations at link level. Split ath12k_vif which is the driver private of ieee80211_vif to store link specific information as ath12k_link_vif. For default use cases the ath12k vif will have a preallocated link vif called deflink which will be used by non ML and the first link vif of ML vif. With MLO support to be added, remaining link vifs will be allocated during channel assignment where vdev create/start happens. These link vifs will be freed during interface down. Current ath12k_vif(arvif) structure +---------------+ +---------------+ +---------------+ | ieee80211_vif | | ieee80211_vif | | ieee80211_vif | | private data | | private data | | private data | | | | | | | | ath12k_vif | | ath12k_vif | | ath12k_vif | | (arvif) | | (arvif) | | (arvif) | | | | | | | | +----------+ | | +----------+ | | +----------+ | | |*ar (2GHz)| | | |*ar (5GHz)| | | |*ar (2GHz)| | | +----------+ | | +----------+ | | +----------+ | | | | | | | +---------------+ +---------------+ +---------------+ The new ath12k_vif (ahvif) containing ath12k_link_vif(s) (arvif) (deflink is preallocated member which is always the first link if ieee80211_vif is MLD and is the only link otherwise): +---------------------------------+ | ieee80211_vif | | private data | | | | ath12k_vif(ahvif) | | | | +-------------------------------+ | |ath12k_link_vif deflink (arvif)| | | +---------------+ | | | | *ar(2GHz) | | | +-------------------------------+ | +-------------------------------+ | | ath12k_link_vif *link (arvif)| | | +---------------+ | | | | *ar(5GHz) | | | +-------------------------------+ | +-------------------------------+ | | ath12k_link_vif *link (arvif)| | | +---------------+ | | | | *ar(6GHz) | | | +-------------------------------+ | | +---------------------------------+ To refactor existing ath12k_vif to make use of link vifs, following changes are made: 1. ath12k_vif now called by variable name ahvif storing multiple arvifs (struct ah12k_link_vif) and also has a back pointer to ieee80211_vif. 2. In this patch set, only deflink is used to be on par with the existing code. When MLO support is added the link id will be used to fetch the arvif. 3. For mac80211 ops which doesn't use specific link_id, the config or info is common for the vif, hence apply the config to all link vifs. The links_map in the ahvif, will be used to identify all the link vifs that are setup. 4. Change ath12k_vif_to_arvif() as ath12k_vif_to_ahvif() to fetch the hw level vif. The link vif can be fetched from ahvif->link[], or the deflink can be accessed via ahvif->deflink. API to access link vif (arvif) by passing link_id can be introduced with MLO Support. 5. The ieee80211_vif can be accessed from ahvif using ath12k_ahvif_to_vif(). The locking continues to use wiphy_lock() for protecting access to most data in struct ath12k&co, there are no changes in that regard. Though struct ath12k_vif::link[] is protected with RCU. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Co-developed-by: Rameshkumar Sundaram <quic_ramess@quicinc.com> Signed-off-by: Rameshkumar Sundaram <quic_ramess@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20241015171416.518022-2-kvalo@kernel.org Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
2024-10-15 20:14:06 +03:00
switch (arvif->ahvif->vdev_type) {
case WMI_VDEV_TYPE_STA:
return ath12k_wow_vdev_clean_nlo(ar, arvif->vdev_id);
default:
return 0;
}
}
static int ath12k_wow_nlo_cleanup(struct ath12k *ar)
{
wifi: ath12k: prepare vif data structure for MLO handling To prepare the driver for MLO support, split the driver vif data structure to scale for multiple links. This requires changing the use of arvif to per link and not per hw which can now comprise of multiple links. Also since most configurations from mac80211 are done per link, do refactoring of the driver functions to apply these configurations at link level. Split ath12k_vif which is the driver private of ieee80211_vif to store link specific information as ath12k_link_vif. For default use cases the ath12k vif will have a preallocated link vif called deflink which will be used by non ML and the first link vif of ML vif. With MLO support to be added, remaining link vifs will be allocated during channel assignment where vdev create/start happens. These link vifs will be freed during interface down. Current ath12k_vif(arvif) structure +---------------+ +---------------+ +---------------+ | ieee80211_vif | | ieee80211_vif | | ieee80211_vif | | private data | | private data | | private data | | | | | | | | ath12k_vif | | ath12k_vif | | ath12k_vif | | (arvif) | | (arvif) | | (arvif) | | | | | | | | +----------+ | | +----------+ | | +----------+ | | |*ar (2GHz)| | | |*ar (5GHz)| | | |*ar (2GHz)| | | +----------+ | | +----------+ | | +----------+ | | | | | | | +---------------+ +---------------+ +---------------+ The new ath12k_vif (ahvif) containing ath12k_link_vif(s) (arvif) (deflink is preallocated member which is always the first link if ieee80211_vif is MLD and is the only link otherwise): +---------------------------------+ | ieee80211_vif | | private data | | | | ath12k_vif(ahvif) | | | | +-------------------------------+ | |ath12k_link_vif deflink (arvif)| | | +---------------+ | | | | *ar(2GHz) | | | +-------------------------------+ | +-------------------------------+ | | ath12k_link_vif *link (arvif)| | | +---------------+ | | | | *ar(5GHz) | | | +-------------------------------+ | +-------------------------------+ | | ath12k_link_vif *link (arvif)| | | +---------------+ | | | | *ar(6GHz) | | | +-------------------------------+ | | +---------------------------------+ To refactor existing ath12k_vif to make use of link vifs, following changes are made: 1. ath12k_vif now called by variable name ahvif storing multiple arvifs (struct ah12k_link_vif) and also has a back pointer to ieee80211_vif. 2. In this patch set, only deflink is used to be on par with the existing code. When MLO support is added the link id will be used to fetch the arvif. 3. For mac80211 ops which doesn't use specific link_id, the config or info is common for the vif, hence apply the config to all link vifs. The links_map in the ahvif, will be used to identify all the link vifs that are setup. 4. Change ath12k_vif_to_arvif() as ath12k_vif_to_ahvif() to fetch the hw level vif. The link vif can be fetched from ahvif->link[], or the deflink can be accessed via ahvif->deflink. API to access link vif (arvif) by passing link_id can be introduced with MLO Support. 5. The ieee80211_vif can be accessed from ahvif using ath12k_ahvif_to_vif(). The locking continues to use wiphy_lock() for protecting access to most data in struct ath12k&co, there are no changes in that regard. Though struct ath12k_vif::link[] is protected with RCU. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Co-developed-by: Rameshkumar Sundaram <quic_ramess@quicinc.com> Signed-off-by: Rameshkumar Sundaram <quic_ramess@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20241015171416.518022-2-kvalo@kernel.org Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
2024-10-15 20:14:06 +03:00
struct ath12k_link_vif *arvif;
int ret;
lockdep_assert_wiphy(ath12k_ar_to_hw(ar)->wiphy);
list_for_each_entry(arvif, &ar->arvifs, list) {
wifi: ath12k: prepare vif data structure for MLO handling To prepare the driver for MLO support, split the driver vif data structure to scale for multiple links. This requires changing the use of arvif to per link and not per hw which can now comprise of multiple links. Also since most configurations from mac80211 are done per link, do refactoring of the driver functions to apply these configurations at link level. Split ath12k_vif which is the driver private of ieee80211_vif to store link specific information as ath12k_link_vif. For default use cases the ath12k vif will have a preallocated link vif called deflink which will be used by non ML and the first link vif of ML vif. With MLO support to be added, remaining link vifs will be allocated during channel assignment where vdev create/start happens. These link vifs will be freed during interface down. Current ath12k_vif(arvif) structure +---------------+ +---------------+ +---------------+ | ieee80211_vif | | ieee80211_vif | | ieee80211_vif | | private data | | private data | | private data | | | | | | | | ath12k_vif | | ath12k_vif | | ath12k_vif | | (arvif) | | (arvif) | | (arvif) | | | | | | | | +----------+ | | +----------+ | | +----------+ | | |*ar (2GHz)| | | |*ar (5GHz)| | | |*ar (2GHz)| | | +----------+ | | +----------+ | | +----------+ | | | | | | | +---------------+ +---------------+ +---------------+ The new ath12k_vif (ahvif) containing ath12k_link_vif(s) (arvif) (deflink is preallocated member which is always the first link if ieee80211_vif is MLD and is the only link otherwise): +---------------------------------+ | ieee80211_vif | | private data | | | | ath12k_vif(ahvif) | | | | +-------------------------------+ | |ath12k_link_vif deflink (arvif)| | | +---------------+ | | | | *ar(2GHz) | | | +-------------------------------+ | +-------------------------------+ | | ath12k_link_vif *link (arvif)| | | +---------------+ | | | | *ar(5GHz) | | | +-------------------------------+ | +-------------------------------+ | | ath12k_link_vif *link (arvif)| | | +---------------+ | | | | *ar(6GHz) | | | +-------------------------------+ | | +---------------------------------+ To refactor existing ath12k_vif to make use of link vifs, following changes are made: 1. ath12k_vif now called by variable name ahvif storing multiple arvifs (struct ah12k_link_vif) and also has a back pointer to ieee80211_vif. 2. In this patch set, only deflink is used to be on par with the existing code. When MLO support is added the link id will be used to fetch the arvif. 3. For mac80211 ops which doesn't use specific link_id, the config or info is common for the vif, hence apply the config to all link vifs. The links_map in the ahvif, will be used to identify all the link vifs that are setup. 4. Change ath12k_vif_to_arvif() as ath12k_vif_to_ahvif() to fetch the hw level vif. The link vif can be fetched from ahvif->link[], or the deflink can be accessed via ahvif->deflink. API to access link vif (arvif) by passing link_id can be introduced with MLO Support. 5. The ieee80211_vif can be accessed from ahvif using ath12k_ahvif_to_vif(). The locking continues to use wiphy_lock() for protecting access to most data in struct ath12k&co, there are no changes in that regard. Though struct ath12k_vif::link[] is protected with RCU. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Co-developed-by: Rameshkumar Sundaram <quic_ramess@quicinc.com> Signed-off-by: Rameshkumar Sundaram <quic_ramess@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20241015171416.518022-2-kvalo@kernel.org Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
2024-10-15 20:14:06 +03:00
if (ath12k_wow_is_p2p_vdev(arvif->ahvif))
continue;
ret = ath12k_wow_vif_clean_nlo(arvif);
if (ret) {
ath12k_warn(ar->ab, "failed to clean nlo settings on vdev %i: %d\n",
arvif->vdev_id, ret);
return ret;
}
}
return 0;
}
static int ath12k_wow_set_hw_filter(struct ath12k *ar)
{
struct wmi_hw_data_filter_arg arg;
wifi: ath12k: prepare vif data structure for MLO handling To prepare the driver for MLO support, split the driver vif data structure to scale for multiple links. This requires changing the use of arvif to per link and not per hw which can now comprise of multiple links. Also since most configurations from mac80211 are done per link, do refactoring of the driver functions to apply these configurations at link level. Split ath12k_vif which is the driver private of ieee80211_vif to store link specific information as ath12k_link_vif. For default use cases the ath12k vif will have a preallocated link vif called deflink which will be used by non ML and the first link vif of ML vif. With MLO support to be added, remaining link vifs will be allocated during channel assignment where vdev create/start happens. These link vifs will be freed during interface down. Current ath12k_vif(arvif) structure +---------------+ +---------------+ +---------------+ | ieee80211_vif | | ieee80211_vif | | ieee80211_vif | | private data | | private data | | private data | | | | | | | | ath12k_vif | | ath12k_vif | | ath12k_vif | | (arvif) | | (arvif) | | (arvif) | | | | | | | | +----------+ | | +----------+ | | +----------+ | | |*ar (2GHz)| | | |*ar (5GHz)| | | |*ar (2GHz)| | | +----------+ | | +----------+ | | +----------+ | | | | | | | +---------------+ +---------------+ +---------------+ The new ath12k_vif (ahvif) containing ath12k_link_vif(s) (arvif) (deflink is preallocated member which is always the first link if ieee80211_vif is MLD and is the only link otherwise): +---------------------------------+ | ieee80211_vif | | private data | | | | ath12k_vif(ahvif) | | | | +-------------------------------+ | |ath12k_link_vif deflink (arvif)| | | +---------------+ | | | | *ar(2GHz) | | | +-------------------------------+ | +-------------------------------+ | | ath12k_link_vif *link (arvif)| | | +---------------+ | | | | *ar(5GHz) | | | +-------------------------------+ | +-------------------------------+ | | ath12k_link_vif *link (arvif)| | | +---------------+ | | | | *ar(6GHz) | | | +-------------------------------+ | | +---------------------------------+ To refactor existing ath12k_vif to make use of link vifs, following changes are made: 1. ath12k_vif now called by variable name ahvif storing multiple arvifs (struct ah12k_link_vif) and also has a back pointer to ieee80211_vif. 2. In this patch set, only deflink is used to be on par with the existing code. When MLO support is added the link id will be used to fetch the arvif. 3. For mac80211 ops which doesn't use specific link_id, the config or info is common for the vif, hence apply the config to all link vifs. The links_map in the ahvif, will be used to identify all the link vifs that are setup. 4. Change ath12k_vif_to_arvif() as ath12k_vif_to_ahvif() to fetch the hw level vif. The link vif can be fetched from ahvif->link[], or the deflink can be accessed via ahvif->deflink. API to access link vif (arvif) by passing link_id can be introduced with MLO Support. 5. The ieee80211_vif can be accessed from ahvif using ath12k_ahvif_to_vif(). The locking continues to use wiphy_lock() for protecting access to most data in struct ath12k&co, there are no changes in that regard. Though struct ath12k_vif::link[] is protected with RCU. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Co-developed-by: Rameshkumar Sundaram <quic_ramess@quicinc.com> Signed-off-by: Rameshkumar Sundaram <quic_ramess@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20241015171416.518022-2-kvalo@kernel.org Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
2024-10-15 20:14:06 +03:00
struct ath12k_link_vif *arvif;
int ret;
lockdep_assert_wiphy(ath12k_ar_to_hw(ar)->wiphy);
list_for_each_entry(arvif, &ar->arvifs, list) {
wifi: ath12k: prepare vif data structure for MLO handling To prepare the driver for MLO support, split the driver vif data structure to scale for multiple links. This requires changing the use of arvif to per link and not per hw which can now comprise of multiple links. Also since most configurations from mac80211 are done per link, do refactoring of the driver functions to apply these configurations at link level. Split ath12k_vif which is the driver private of ieee80211_vif to store link specific information as ath12k_link_vif. For default use cases the ath12k vif will have a preallocated link vif called deflink which will be used by non ML and the first link vif of ML vif. With MLO support to be added, remaining link vifs will be allocated during channel assignment where vdev create/start happens. These link vifs will be freed during interface down. Current ath12k_vif(arvif) structure +---------------+ +---------------+ +---------------+ | ieee80211_vif | | ieee80211_vif | | ieee80211_vif | | private data | | private data | | private data | | | | | | | | ath12k_vif | | ath12k_vif | | ath12k_vif | | (arvif) | | (arvif) | | (arvif) | | | | | | | | +----------+ | | +----------+ | | +----------+ | | |*ar (2GHz)| | | |*ar (5GHz)| | | |*ar (2GHz)| | | +----------+ | | +----------+ | | +----------+ | | | | | | | +---------------+ +---------------+ +---------------+ The new ath12k_vif (ahvif) containing ath12k_link_vif(s) (arvif) (deflink is preallocated member which is always the first link if ieee80211_vif is MLD and is the only link otherwise): +---------------------------------+ | ieee80211_vif | | private data | | | | ath12k_vif(ahvif) | | | | +-------------------------------+ | |ath12k_link_vif deflink (arvif)| | | +---------------+ | | | | *ar(2GHz) | | | +-------------------------------+ | +-------------------------------+ | | ath12k_link_vif *link (arvif)| | | +---------------+ | | | | *ar(5GHz) | | | +-------------------------------+ | +-------------------------------+ | | ath12k_link_vif *link (arvif)| | | +---------------+ | | | | *ar(6GHz) | | | +-------------------------------+ | | +---------------------------------+ To refactor existing ath12k_vif to make use of link vifs, following changes are made: 1. ath12k_vif now called by variable name ahvif storing multiple arvifs (struct ah12k_link_vif) and also has a back pointer to ieee80211_vif. 2. In this patch set, only deflink is used to be on par with the existing code. When MLO support is added the link id will be used to fetch the arvif. 3. For mac80211 ops which doesn't use specific link_id, the config or info is common for the vif, hence apply the config to all link vifs. The links_map in the ahvif, will be used to identify all the link vifs that are setup. 4. Change ath12k_vif_to_arvif() as ath12k_vif_to_ahvif() to fetch the hw level vif. The link vif can be fetched from ahvif->link[], or the deflink can be accessed via ahvif->deflink. API to access link vif (arvif) by passing link_id can be introduced with MLO Support. 5. The ieee80211_vif can be accessed from ahvif using ath12k_ahvif_to_vif(). The locking continues to use wiphy_lock() for protecting access to most data in struct ath12k&co, there are no changes in that regard. Though struct ath12k_vif::link[] is protected with RCU. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Co-developed-by: Rameshkumar Sundaram <quic_ramess@quicinc.com> Signed-off-by: Rameshkumar Sundaram <quic_ramess@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20241015171416.518022-2-kvalo@kernel.org Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
2024-10-15 20:14:06 +03:00
if (arvif->ahvif->vdev_type != WMI_VDEV_TYPE_STA)
continue;
arg.vdev_id = arvif->vdev_id;
arg.enable = true;
arg.hw_filter_bitmap = WMI_HW_DATA_FILTER_DROP_NON_ICMPV6_MC;
ret = ath12k_wmi_hw_data_filter_cmd(ar, &arg);
if (ret) {
ath12k_warn(ar->ab, "failed to set hw data filter on vdev %i: %d\n",
arvif->vdev_id, ret);
return ret;
}
}
return 0;
}
static int ath12k_wow_clear_hw_filter(struct ath12k *ar)
{
struct wmi_hw_data_filter_arg arg;
wifi: ath12k: prepare vif data structure for MLO handling To prepare the driver for MLO support, split the driver vif data structure to scale for multiple links. This requires changing the use of arvif to per link and not per hw which can now comprise of multiple links. Also since most configurations from mac80211 are done per link, do refactoring of the driver functions to apply these configurations at link level. Split ath12k_vif which is the driver private of ieee80211_vif to store link specific information as ath12k_link_vif. For default use cases the ath12k vif will have a preallocated link vif called deflink which will be used by non ML and the first link vif of ML vif. With MLO support to be added, remaining link vifs will be allocated during channel assignment where vdev create/start happens. These link vifs will be freed during interface down. Current ath12k_vif(arvif) structure +---------------+ +---------------+ +---------------+ | ieee80211_vif | | ieee80211_vif | | ieee80211_vif | | private data | | private data | | private data | | | | | | | | ath12k_vif | | ath12k_vif | | ath12k_vif | | (arvif) | | (arvif) | | (arvif) | | | | | | | | +----------+ | | +----------+ | | +----------+ | | |*ar (2GHz)| | | |*ar (5GHz)| | | |*ar (2GHz)| | | +----------+ | | +----------+ | | +----------+ | | | | | | | +---------------+ +---------------+ +---------------+ The new ath12k_vif (ahvif) containing ath12k_link_vif(s) (arvif) (deflink is preallocated member which is always the first link if ieee80211_vif is MLD and is the only link otherwise): +---------------------------------+ | ieee80211_vif | | private data | | | | ath12k_vif(ahvif) | | | | +-------------------------------+ | |ath12k_link_vif deflink (arvif)| | | +---------------+ | | | | *ar(2GHz) | | | +-------------------------------+ | +-------------------------------+ | | ath12k_link_vif *link (arvif)| | | +---------------+ | | | | *ar(5GHz) | | | +-------------------------------+ | +-------------------------------+ | | ath12k_link_vif *link (arvif)| | | +---------------+ | | | | *ar(6GHz) | | | +-------------------------------+ | | +---------------------------------+ To refactor existing ath12k_vif to make use of link vifs, following changes are made: 1. ath12k_vif now called by variable name ahvif storing multiple arvifs (struct ah12k_link_vif) and also has a back pointer to ieee80211_vif. 2. In this patch set, only deflink is used to be on par with the existing code. When MLO support is added the link id will be used to fetch the arvif. 3. For mac80211 ops which doesn't use specific link_id, the config or info is common for the vif, hence apply the config to all link vifs. The links_map in the ahvif, will be used to identify all the link vifs that are setup. 4. Change ath12k_vif_to_arvif() as ath12k_vif_to_ahvif() to fetch the hw level vif. The link vif can be fetched from ahvif->link[], or the deflink can be accessed via ahvif->deflink. API to access link vif (arvif) by passing link_id can be introduced with MLO Support. 5. The ieee80211_vif can be accessed from ahvif using ath12k_ahvif_to_vif(). The locking continues to use wiphy_lock() for protecting access to most data in struct ath12k&co, there are no changes in that regard. Though struct ath12k_vif::link[] is protected with RCU. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Co-developed-by: Rameshkumar Sundaram <quic_ramess@quicinc.com> Signed-off-by: Rameshkumar Sundaram <quic_ramess@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20241015171416.518022-2-kvalo@kernel.org Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
2024-10-15 20:14:06 +03:00
struct ath12k_link_vif *arvif;
int ret;
lockdep_assert_wiphy(ath12k_ar_to_hw(ar)->wiphy);
list_for_each_entry(arvif, &ar->arvifs, list) {
wifi: ath12k: prepare vif data structure for MLO handling To prepare the driver for MLO support, split the driver vif data structure to scale for multiple links. This requires changing the use of arvif to per link and not per hw which can now comprise of multiple links. Also since most configurations from mac80211 are done per link, do refactoring of the driver functions to apply these configurations at link level. Split ath12k_vif which is the driver private of ieee80211_vif to store link specific information as ath12k_link_vif. For default use cases the ath12k vif will have a preallocated link vif called deflink which will be used by non ML and the first link vif of ML vif. With MLO support to be added, remaining link vifs will be allocated during channel assignment where vdev create/start happens. These link vifs will be freed during interface down. Current ath12k_vif(arvif) structure +---------------+ +---------------+ +---------------+ | ieee80211_vif | | ieee80211_vif | | ieee80211_vif | | private data | | private data | | private data | | | | | | | | ath12k_vif | | ath12k_vif | | ath12k_vif | | (arvif) | | (arvif) | | (arvif) | | | | | | | | +----------+ | | +----------+ | | +----------+ | | |*ar (2GHz)| | | |*ar (5GHz)| | | |*ar (2GHz)| | | +----------+ | | +----------+ | | +----------+ | | | | | | | +---------------+ +---------------+ +---------------+ The new ath12k_vif (ahvif) containing ath12k_link_vif(s) (arvif) (deflink is preallocated member which is always the first link if ieee80211_vif is MLD and is the only link otherwise): +---------------------------------+ | ieee80211_vif | | private data | | | | ath12k_vif(ahvif) | | | | +-------------------------------+ | |ath12k_link_vif deflink (arvif)| | | +---------------+ | | | | *ar(2GHz) | | | +-------------------------------+ | +-------------------------------+ | | ath12k_link_vif *link (arvif)| | | +---------------+ | | | | *ar(5GHz) | | | +-------------------------------+ | +-------------------------------+ | | ath12k_link_vif *link (arvif)| | | +---------------+ | | | | *ar(6GHz) | | | +-------------------------------+ | | +---------------------------------+ To refactor existing ath12k_vif to make use of link vifs, following changes are made: 1. ath12k_vif now called by variable name ahvif storing multiple arvifs (struct ah12k_link_vif) and also has a back pointer to ieee80211_vif. 2. In this patch set, only deflink is used to be on par with the existing code. When MLO support is added the link id will be used to fetch the arvif. 3. For mac80211 ops which doesn't use specific link_id, the config or info is common for the vif, hence apply the config to all link vifs. The links_map in the ahvif, will be used to identify all the link vifs that are setup. 4. Change ath12k_vif_to_arvif() as ath12k_vif_to_ahvif() to fetch the hw level vif. The link vif can be fetched from ahvif->link[], or the deflink can be accessed via ahvif->deflink. API to access link vif (arvif) by passing link_id can be introduced with MLO Support. 5. The ieee80211_vif can be accessed from ahvif using ath12k_ahvif_to_vif(). The locking continues to use wiphy_lock() for protecting access to most data in struct ath12k&co, there are no changes in that regard. Though struct ath12k_vif::link[] is protected with RCU. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Co-developed-by: Rameshkumar Sundaram <quic_ramess@quicinc.com> Signed-off-by: Rameshkumar Sundaram <quic_ramess@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20241015171416.518022-2-kvalo@kernel.org Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
2024-10-15 20:14:06 +03:00
if (arvif->ahvif->vdev_type != WMI_VDEV_TYPE_STA)
continue;
arg.vdev_id = arvif->vdev_id;
arg.enable = false;
arg.hw_filter_bitmap = 0;
ret = ath12k_wmi_hw_data_filter_cmd(ar, &arg);
if (ret) {
ath12k_warn(ar->ab, "failed to clear hw data filter on vdev %i: %d\n",
arvif->vdev_id, ret);
return ret;
}
}
return 0;
}
static void ath12k_wow_generate_ns_mc_addr(struct ath12k_base *ab,
struct wmi_arp_ns_offload_arg *offload)
{
int i;
for (i = 0; i < offload->ipv6_count; i++) {
offload->self_ipv6_addr[i][0] = 0xff;
offload->self_ipv6_addr[i][1] = 0x02;
offload->self_ipv6_addr[i][11] = 0x01;
offload->self_ipv6_addr[i][12] = 0xff;
offload->self_ipv6_addr[i][13] =
offload->ipv6_addr[i][13];
offload->self_ipv6_addr[i][14] =
offload->ipv6_addr[i][14];
offload->self_ipv6_addr[i][15] =
offload->ipv6_addr[i][15];
ath12k_dbg(ab, ATH12K_DBG_WOW, "NS solicited addr %pI6\n",
offload->self_ipv6_addr[i]);
}
}
wifi: ath12k: prepare vif data structure for MLO handling To prepare the driver for MLO support, split the driver vif data structure to scale for multiple links. This requires changing the use of arvif to per link and not per hw which can now comprise of multiple links. Also since most configurations from mac80211 are done per link, do refactoring of the driver functions to apply these configurations at link level. Split ath12k_vif which is the driver private of ieee80211_vif to store link specific information as ath12k_link_vif. For default use cases the ath12k vif will have a preallocated link vif called deflink which will be used by non ML and the first link vif of ML vif. With MLO support to be added, remaining link vifs will be allocated during channel assignment where vdev create/start happens. These link vifs will be freed during interface down. Current ath12k_vif(arvif) structure +---------------+ +---------------+ +---------------+ | ieee80211_vif | | ieee80211_vif | | ieee80211_vif | | private data | | private data | | private data | | | | | | | | ath12k_vif | | ath12k_vif | | ath12k_vif | | (arvif) | | (arvif) | | (arvif) | | | | | | | | +----------+ | | +----------+ | | +----------+ | | |*ar (2GHz)| | | |*ar (5GHz)| | | |*ar (2GHz)| | | +----------+ | | +----------+ | | +----------+ | | | | | | | +---------------+ +---------------+ +---------------+ The new ath12k_vif (ahvif) containing ath12k_link_vif(s) (arvif) (deflink is preallocated member which is always the first link if ieee80211_vif is MLD and is the only link otherwise): +---------------------------------+ | ieee80211_vif | | private data | | | | ath12k_vif(ahvif) | | | | +-------------------------------+ | |ath12k_link_vif deflink (arvif)| | | +---------------+ | | | | *ar(2GHz) | | | +-------------------------------+ | +-------------------------------+ | | ath12k_link_vif *link (arvif)| | | +---------------+ | | | | *ar(5GHz) | | | +-------------------------------+ | +-------------------------------+ | | ath12k_link_vif *link (arvif)| | | +---------------+ | | | | *ar(6GHz) | | | +-------------------------------+ | | +---------------------------------+ To refactor existing ath12k_vif to make use of link vifs, following changes are made: 1. ath12k_vif now called by variable name ahvif storing multiple arvifs (struct ah12k_link_vif) and also has a back pointer to ieee80211_vif. 2. In this patch set, only deflink is used to be on par with the existing code. When MLO support is added the link id will be used to fetch the arvif. 3. For mac80211 ops which doesn't use specific link_id, the config or info is common for the vif, hence apply the config to all link vifs. The links_map in the ahvif, will be used to identify all the link vifs that are setup. 4. Change ath12k_vif_to_arvif() as ath12k_vif_to_ahvif() to fetch the hw level vif. The link vif can be fetched from ahvif->link[], or the deflink can be accessed via ahvif->deflink. API to access link vif (arvif) by passing link_id can be introduced with MLO Support. 5. The ieee80211_vif can be accessed from ahvif using ath12k_ahvif_to_vif(). The locking continues to use wiphy_lock() for protecting access to most data in struct ath12k&co, there are no changes in that regard. Though struct ath12k_vif::link[] is protected with RCU. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Co-developed-by: Rameshkumar Sundaram <quic_ramess@quicinc.com> Signed-off-by: Rameshkumar Sundaram <quic_ramess@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20241015171416.518022-2-kvalo@kernel.org Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
2024-10-15 20:14:06 +03:00
static void ath12k_wow_prepare_ns_offload(struct ath12k_link_vif *arvif,
struct wmi_arp_ns_offload_arg *offload)
{
wifi: ath12k: prepare vif data structure for MLO handling To prepare the driver for MLO support, split the driver vif data structure to scale for multiple links. This requires changing the use of arvif to per link and not per hw which can now comprise of multiple links. Also since most configurations from mac80211 are done per link, do refactoring of the driver functions to apply these configurations at link level. Split ath12k_vif which is the driver private of ieee80211_vif to store link specific information as ath12k_link_vif. For default use cases the ath12k vif will have a preallocated link vif called deflink which will be used by non ML and the first link vif of ML vif. With MLO support to be added, remaining link vifs will be allocated during channel assignment where vdev create/start happens. These link vifs will be freed during interface down. Current ath12k_vif(arvif) structure +---------------+ +---------------+ +---------------+ | ieee80211_vif | | ieee80211_vif | | ieee80211_vif | | private data | | private data | | private data | | | | | | | | ath12k_vif | | ath12k_vif | | ath12k_vif | | (arvif) | | (arvif) | | (arvif) | | | | | | | | +----------+ | | +----------+ | | +----------+ | | |*ar (2GHz)| | | |*ar (5GHz)| | | |*ar (2GHz)| | | +----------+ | | +----------+ | | +----------+ | | | | | | | +---------------+ +---------------+ +---------------+ The new ath12k_vif (ahvif) containing ath12k_link_vif(s) (arvif) (deflink is preallocated member which is always the first link if ieee80211_vif is MLD and is the only link otherwise): +---------------------------------+ | ieee80211_vif | | private data | | | | ath12k_vif(ahvif) | | | | +-------------------------------+ | |ath12k_link_vif deflink (arvif)| | | +---------------+ | | | | *ar(2GHz) | | | +-------------------------------+ | +-------------------------------+ | | ath12k_link_vif *link (arvif)| | | +---------------+ | | | | *ar(5GHz) | | | +-------------------------------+ | +-------------------------------+ | | ath12k_link_vif *link (arvif)| | | +---------------+ | | | | *ar(6GHz) | | | +-------------------------------+ | | +---------------------------------+ To refactor existing ath12k_vif to make use of link vifs, following changes are made: 1. ath12k_vif now called by variable name ahvif storing multiple arvifs (struct ah12k_link_vif) and also has a back pointer to ieee80211_vif. 2. In this patch set, only deflink is used to be on par with the existing code. When MLO support is added the link id will be used to fetch the arvif. 3. For mac80211 ops which doesn't use specific link_id, the config or info is common for the vif, hence apply the config to all link vifs. The links_map in the ahvif, will be used to identify all the link vifs that are setup. 4. Change ath12k_vif_to_arvif() as ath12k_vif_to_ahvif() to fetch the hw level vif. The link vif can be fetched from ahvif->link[], or the deflink can be accessed via ahvif->deflink. API to access link vif (arvif) by passing link_id can be introduced with MLO Support. 5. The ieee80211_vif can be accessed from ahvif using ath12k_ahvif_to_vif(). The locking continues to use wiphy_lock() for protecting access to most data in struct ath12k&co, there are no changes in that regard. Though struct ath12k_vif::link[] is protected with RCU. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Co-developed-by: Rameshkumar Sundaram <quic_ramess@quicinc.com> Signed-off-by: Rameshkumar Sundaram <quic_ramess@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20241015171416.518022-2-kvalo@kernel.org Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
2024-10-15 20:14:06 +03:00
struct net_device *ndev = ieee80211_vif_to_wdev(arvif->ahvif->vif)->netdev;
struct ath12k_base *ab = arvif->ar->ab;
struct inet6_ifaddr *ifa6;
struct ifacaddr6 *ifaca6;
struct inet6_dev *idev;
u32 count = 0, scope;
if (!ndev)
return;
idev = in6_dev_get(ndev);
if (!idev)
return;
ath12k_dbg(ab, ATH12K_DBG_WOW, "wow prepare ns offload\n");
read_lock_bh(&idev->lock);
/* get unicast address */
list_for_each_entry(ifa6, &idev->addr_list, if_list) {
if (count >= WMI_IPV6_MAX_COUNT)
goto unlock;
if (ifa6->flags & IFA_F_DADFAILED)
continue;
scope = ipv6_addr_src_scope(&ifa6->addr);
if (scope != IPV6_ADDR_SCOPE_LINKLOCAL &&
scope != IPV6_ADDR_SCOPE_GLOBAL) {
ath12k_dbg(ab, ATH12K_DBG_WOW,
"Unsupported ipv6 scope: %d\n", scope);
continue;
}
memcpy(offload->ipv6_addr[count], &ifa6->addr.s6_addr,
sizeof(ifa6->addr.s6_addr));
offload->ipv6_type[count] = WMI_IPV6_UC_TYPE;
ath12k_dbg(ab, ATH12K_DBG_WOW, "mac count %d ipv6 uc %pI6 scope %d\n",
count, offload->ipv6_addr[count],
scope);
count++;
}
/* get anycast address */
rcu_read_lock();
for (ifaca6 = rcu_dereference(idev->ac_list); ifaca6;
ifaca6 = rcu_dereference(ifaca6->aca_next)) {
if (count >= WMI_IPV6_MAX_COUNT) {
rcu_read_unlock();
goto unlock;
}
scope = ipv6_addr_src_scope(&ifaca6->aca_addr);
if (scope != IPV6_ADDR_SCOPE_LINKLOCAL &&
scope != IPV6_ADDR_SCOPE_GLOBAL) {
ath12k_dbg(ab, ATH12K_DBG_WOW,
"Unsupported ipv scope: %d\n", scope);
continue;
}
memcpy(offload->ipv6_addr[count], &ifaca6->aca_addr,
sizeof(ifaca6->aca_addr));
offload->ipv6_type[count] = WMI_IPV6_AC_TYPE;
ath12k_dbg(ab, ATH12K_DBG_WOW, "mac count %d ipv6 ac %pI6 scope %d\n",
count, offload->ipv6_addr[count],
scope);
count++;
}
rcu_read_unlock();
unlock:
read_unlock_bh(&idev->lock);
in6_dev_put(idev);
offload->ipv6_count = count;
ath12k_wow_generate_ns_mc_addr(ab, offload);
}
wifi: ath12k: prepare vif data structure for MLO handling To prepare the driver for MLO support, split the driver vif data structure to scale for multiple links. This requires changing the use of arvif to per link and not per hw which can now comprise of multiple links. Also since most configurations from mac80211 are done per link, do refactoring of the driver functions to apply these configurations at link level. Split ath12k_vif which is the driver private of ieee80211_vif to store link specific information as ath12k_link_vif. For default use cases the ath12k vif will have a preallocated link vif called deflink which will be used by non ML and the first link vif of ML vif. With MLO support to be added, remaining link vifs will be allocated during channel assignment where vdev create/start happens. These link vifs will be freed during interface down. Current ath12k_vif(arvif) structure +---------------+ +---------------+ +---------------+ | ieee80211_vif | | ieee80211_vif | | ieee80211_vif | | private data | | private data | | private data | | | | | | | | ath12k_vif | | ath12k_vif | | ath12k_vif | | (arvif) | | (arvif) | | (arvif) | | | | | | | | +----------+ | | +----------+ | | +----------+ | | |*ar (2GHz)| | | |*ar (5GHz)| | | |*ar (2GHz)| | | +----------+ | | +----------+ | | +----------+ | | | | | | | +---------------+ +---------------+ +---------------+ The new ath12k_vif (ahvif) containing ath12k_link_vif(s) (arvif) (deflink is preallocated member which is always the first link if ieee80211_vif is MLD and is the only link otherwise): +---------------------------------+ | ieee80211_vif | | private data | | | | ath12k_vif(ahvif) | | | | +-------------------------------+ | |ath12k_link_vif deflink (arvif)| | | +---------------+ | | | | *ar(2GHz) | | | +-------------------------------+ | +-------------------------------+ | | ath12k_link_vif *link (arvif)| | | +---------------+ | | | | *ar(5GHz) | | | +-------------------------------+ | +-------------------------------+ | | ath12k_link_vif *link (arvif)| | | +---------------+ | | | | *ar(6GHz) | | | +-------------------------------+ | | +---------------------------------+ To refactor existing ath12k_vif to make use of link vifs, following changes are made: 1. ath12k_vif now called by variable name ahvif storing multiple arvifs (struct ah12k_link_vif) and also has a back pointer to ieee80211_vif. 2. In this patch set, only deflink is used to be on par with the existing code. When MLO support is added the link id will be used to fetch the arvif. 3. For mac80211 ops which doesn't use specific link_id, the config or info is common for the vif, hence apply the config to all link vifs. The links_map in the ahvif, will be used to identify all the link vifs that are setup. 4. Change ath12k_vif_to_arvif() as ath12k_vif_to_ahvif() to fetch the hw level vif. The link vif can be fetched from ahvif->link[], or the deflink can be accessed via ahvif->deflink. API to access link vif (arvif) by passing link_id can be introduced with MLO Support. 5. The ieee80211_vif can be accessed from ahvif using ath12k_ahvif_to_vif(). The locking continues to use wiphy_lock() for protecting access to most data in struct ath12k&co, there are no changes in that regard. Though struct ath12k_vif::link[] is protected with RCU. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Co-developed-by: Rameshkumar Sundaram <quic_ramess@quicinc.com> Signed-off-by: Rameshkumar Sundaram <quic_ramess@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20241015171416.518022-2-kvalo@kernel.org Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
2024-10-15 20:14:06 +03:00
static void ath12k_wow_prepare_arp_offload(struct ath12k_link_vif *arvif,
struct wmi_arp_ns_offload_arg *offload)
{
wifi: ath12k: prepare vif data structure for MLO handling To prepare the driver for MLO support, split the driver vif data structure to scale for multiple links. This requires changing the use of arvif to per link and not per hw which can now comprise of multiple links. Also since most configurations from mac80211 are done per link, do refactoring of the driver functions to apply these configurations at link level. Split ath12k_vif which is the driver private of ieee80211_vif to store link specific information as ath12k_link_vif. For default use cases the ath12k vif will have a preallocated link vif called deflink which will be used by non ML and the first link vif of ML vif. With MLO support to be added, remaining link vifs will be allocated during channel assignment where vdev create/start happens. These link vifs will be freed during interface down. Current ath12k_vif(arvif) structure +---------------+ +---------------+ +---------------+ | ieee80211_vif | | ieee80211_vif | | ieee80211_vif | | private data | | private data | | private data | | | | | | | | ath12k_vif | | ath12k_vif | | ath12k_vif | | (arvif) | | (arvif) | | (arvif) | | | | | | | | +----------+ | | +----------+ | | +----------+ | | |*ar (2GHz)| | | |*ar (5GHz)| | | |*ar (2GHz)| | | +----------+ | | +----------+ | | +----------+ | | | | | | | +---------------+ +---------------+ +---------------+ The new ath12k_vif (ahvif) containing ath12k_link_vif(s) (arvif) (deflink is preallocated member which is always the first link if ieee80211_vif is MLD and is the only link otherwise): +---------------------------------+ | ieee80211_vif | | private data | | | | ath12k_vif(ahvif) | | | | +-------------------------------+ | |ath12k_link_vif deflink (arvif)| | | +---------------+ | | | | *ar(2GHz) | | | +-------------------------------+ | +-------------------------------+ | | ath12k_link_vif *link (arvif)| | | +---------------+ | | | | *ar(5GHz) | | | +-------------------------------+ | +-------------------------------+ | | ath12k_link_vif *link (arvif)| | | +---------------+ | | | | *ar(6GHz) | | | +-------------------------------+ | | +---------------------------------+ To refactor existing ath12k_vif to make use of link vifs, following changes are made: 1. ath12k_vif now called by variable name ahvif storing multiple arvifs (struct ah12k_link_vif) and also has a back pointer to ieee80211_vif. 2. In this patch set, only deflink is used to be on par with the existing code. When MLO support is added the link id will be used to fetch the arvif. 3. For mac80211 ops which doesn't use specific link_id, the config or info is common for the vif, hence apply the config to all link vifs. The links_map in the ahvif, will be used to identify all the link vifs that are setup. 4. Change ath12k_vif_to_arvif() as ath12k_vif_to_ahvif() to fetch the hw level vif. The link vif can be fetched from ahvif->link[], or the deflink can be accessed via ahvif->deflink. API to access link vif (arvif) by passing link_id can be introduced with MLO Support. 5. The ieee80211_vif can be accessed from ahvif using ath12k_ahvif_to_vif(). The locking continues to use wiphy_lock() for protecting access to most data in struct ath12k&co, there are no changes in that regard. Though struct ath12k_vif::link[] is protected with RCU. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Co-developed-by: Rameshkumar Sundaram <quic_ramess@quicinc.com> Signed-off-by: Rameshkumar Sundaram <quic_ramess@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20241015171416.518022-2-kvalo@kernel.org Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
2024-10-15 20:14:06 +03:00
struct ieee80211_vif *vif = arvif->ahvif->vif;
struct ieee80211_vif_cfg vif_cfg = vif->cfg;
struct ath12k_base *ab = arvif->ar->ab;
u32 ipv4_cnt;
ath12k_dbg(ab, ATH12K_DBG_WOW, "wow prepare arp offload\n");
ipv4_cnt = min(vif_cfg.arp_addr_cnt, WMI_IPV4_MAX_COUNT);
memcpy(offload->ipv4_addr, vif_cfg.arp_addr_list, ipv4_cnt * sizeof(u32));
offload->ipv4_count = ipv4_cnt;
ath12k_dbg(ab, ATH12K_DBG_WOW,
"wow arp_addr_cnt %d vif->addr %pM, offload_addr %pI4\n",
vif_cfg.arp_addr_cnt, vif->addr, offload->ipv4_addr);
}
static int ath12k_wow_arp_ns_offload(struct ath12k *ar, bool enable)
{
struct wmi_arp_ns_offload_arg *offload;
wifi: ath12k: prepare vif data structure for MLO handling To prepare the driver for MLO support, split the driver vif data structure to scale for multiple links. This requires changing the use of arvif to per link and not per hw which can now comprise of multiple links. Also since most configurations from mac80211 are done per link, do refactoring of the driver functions to apply these configurations at link level. Split ath12k_vif which is the driver private of ieee80211_vif to store link specific information as ath12k_link_vif. For default use cases the ath12k vif will have a preallocated link vif called deflink which will be used by non ML and the first link vif of ML vif. With MLO support to be added, remaining link vifs will be allocated during channel assignment where vdev create/start happens. These link vifs will be freed during interface down. Current ath12k_vif(arvif) structure +---------------+ +---------------+ +---------------+ | ieee80211_vif | | ieee80211_vif | | ieee80211_vif | | private data | | private data | | private data | | | | | | | | ath12k_vif | | ath12k_vif | | ath12k_vif | | (arvif) | | (arvif) | | (arvif) | | | | | | | | +----------+ | | +----------+ | | +----------+ | | |*ar (2GHz)| | | |*ar (5GHz)| | | |*ar (2GHz)| | | +----------+ | | +----------+ | | +----------+ | | | | | | | +---------------+ +---------------+ +---------------+ The new ath12k_vif (ahvif) containing ath12k_link_vif(s) (arvif) (deflink is preallocated member which is always the first link if ieee80211_vif is MLD and is the only link otherwise): +---------------------------------+ | ieee80211_vif | | private data | | | | ath12k_vif(ahvif) | | | | +-------------------------------+ | |ath12k_link_vif deflink (arvif)| | | +---------------+ | | | | *ar(2GHz) | | | +-------------------------------+ | +-------------------------------+ | | ath12k_link_vif *link (arvif)| | | +---------------+ | | | | *ar(5GHz) | | | +-------------------------------+ | +-------------------------------+ | | ath12k_link_vif *link (arvif)| | | +---------------+ | | | | *ar(6GHz) | | | +-------------------------------+ | | +---------------------------------+ To refactor existing ath12k_vif to make use of link vifs, following changes are made: 1. ath12k_vif now called by variable name ahvif storing multiple arvifs (struct ah12k_link_vif) and also has a back pointer to ieee80211_vif. 2. In this patch set, only deflink is used to be on par with the existing code. When MLO support is added the link id will be used to fetch the arvif. 3. For mac80211 ops which doesn't use specific link_id, the config or info is common for the vif, hence apply the config to all link vifs. The links_map in the ahvif, will be used to identify all the link vifs that are setup. 4. Change ath12k_vif_to_arvif() as ath12k_vif_to_ahvif() to fetch the hw level vif. The link vif can be fetched from ahvif->link[], or the deflink can be accessed via ahvif->deflink. API to access link vif (arvif) by passing link_id can be introduced with MLO Support. 5. The ieee80211_vif can be accessed from ahvif using ath12k_ahvif_to_vif(). The locking continues to use wiphy_lock() for protecting access to most data in struct ath12k&co, there are no changes in that regard. Though struct ath12k_vif::link[] is protected with RCU. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Co-developed-by: Rameshkumar Sundaram <quic_ramess@quicinc.com> Signed-off-by: Rameshkumar Sundaram <quic_ramess@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20241015171416.518022-2-kvalo@kernel.org Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
2024-10-15 20:14:06 +03:00
struct ath12k_link_vif *arvif;
struct ath12k_vif *ahvif;
int ret;
lockdep_assert_wiphy(ath12k_ar_to_hw(ar)->wiphy);
offload = kmalloc(sizeof(*offload), GFP_KERNEL);
if (!offload)
return -ENOMEM;
list_for_each_entry(arvif, &ar->arvifs, list) {
wifi: ath12k: prepare vif data structure for MLO handling To prepare the driver for MLO support, split the driver vif data structure to scale for multiple links. This requires changing the use of arvif to per link and not per hw which can now comprise of multiple links. Also since most configurations from mac80211 are done per link, do refactoring of the driver functions to apply these configurations at link level. Split ath12k_vif which is the driver private of ieee80211_vif to store link specific information as ath12k_link_vif. For default use cases the ath12k vif will have a preallocated link vif called deflink which will be used by non ML and the first link vif of ML vif. With MLO support to be added, remaining link vifs will be allocated during channel assignment where vdev create/start happens. These link vifs will be freed during interface down. Current ath12k_vif(arvif) structure +---------------+ +---------------+ +---------------+ | ieee80211_vif | | ieee80211_vif | | ieee80211_vif | | private data | | private data | | private data | | | | | | | | ath12k_vif | | ath12k_vif | | ath12k_vif | | (arvif) | | (arvif) | | (arvif) | | | | | | | | +----------+ | | +----------+ | | +----------+ | | |*ar (2GHz)| | | |*ar (5GHz)| | | |*ar (2GHz)| | | +----------+ | | +----------+ | | +----------+ | | | | | | | +---------------+ +---------------+ +---------------+ The new ath12k_vif (ahvif) containing ath12k_link_vif(s) (arvif) (deflink is preallocated member which is always the first link if ieee80211_vif is MLD and is the only link otherwise): +---------------------------------+ | ieee80211_vif | | private data | | | | ath12k_vif(ahvif) | | | | +-------------------------------+ | |ath12k_link_vif deflink (arvif)| | | +---------------+ | | | | *ar(2GHz) | | | +-------------------------------+ | +-------------------------------+ | | ath12k_link_vif *link (arvif)| | | +---------------+ | | | | *ar(5GHz) | | | +-------------------------------+ | +-------------------------------+ | | ath12k_link_vif *link (arvif)| | | +---------------+ | | | | *ar(6GHz) | | | +-------------------------------+ | | +---------------------------------+ To refactor existing ath12k_vif to make use of link vifs, following changes are made: 1. ath12k_vif now called by variable name ahvif storing multiple arvifs (struct ah12k_link_vif) and also has a back pointer to ieee80211_vif. 2. In this patch set, only deflink is used to be on par with the existing code. When MLO support is added the link id will be used to fetch the arvif. 3. For mac80211 ops which doesn't use specific link_id, the config or info is common for the vif, hence apply the config to all link vifs. The links_map in the ahvif, will be used to identify all the link vifs that are setup. 4. Change ath12k_vif_to_arvif() as ath12k_vif_to_ahvif() to fetch the hw level vif. The link vif can be fetched from ahvif->link[], or the deflink can be accessed via ahvif->deflink. API to access link vif (arvif) by passing link_id can be introduced with MLO Support. 5. The ieee80211_vif can be accessed from ahvif using ath12k_ahvif_to_vif(). The locking continues to use wiphy_lock() for protecting access to most data in struct ath12k&co, there are no changes in that regard. Though struct ath12k_vif::link[] is protected with RCU. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Co-developed-by: Rameshkumar Sundaram <quic_ramess@quicinc.com> Signed-off-by: Rameshkumar Sundaram <quic_ramess@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20241015171416.518022-2-kvalo@kernel.org Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
2024-10-15 20:14:06 +03:00
ahvif = arvif->ahvif;
if (ahvif->vdev_type != WMI_VDEV_TYPE_STA)
continue;
memset(offload, 0, sizeof(*offload));
wifi: ath12k: prepare vif data structure for MLO handling To prepare the driver for MLO support, split the driver vif data structure to scale for multiple links. This requires changing the use of arvif to per link and not per hw which can now comprise of multiple links. Also since most configurations from mac80211 are done per link, do refactoring of the driver functions to apply these configurations at link level. Split ath12k_vif which is the driver private of ieee80211_vif to store link specific information as ath12k_link_vif. For default use cases the ath12k vif will have a preallocated link vif called deflink which will be used by non ML and the first link vif of ML vif. With MLO support to be added, remaining link vifs will be allocated during channel assignment where vdev create/start happens. These link vifs will be freed during interface down. Current ath12k_vif(arvif) structure +---------------+ +---------------+ +---------------+ | ieee80211_vif | | ieee80211_vif | | ieee80211_vif | | private data | | private data | | private data | | | | | | | | ath12k_vif | | ath12k_vif | | ath12k_vif | | (arvif) | | (arvif) | | (arvif) | | | | | | | | +----------+ | | +----------+ | | +----------+ | | |*ar (2GHz)| | | |*ar (5GHz)| | | |*ar (2GHz)| | | +----------+ | | +----------+ | | +----------+ | | | | | | | +---------------+ +---------------+ +---------------+ The new ath12k_vif (ahvif) containing ath12k_link_vif(s) (arvif) (deflink is preallocated member which is always the first link if ieee80211_vif is MLD and is the only link otherwise): +---------------------------------+ | ieee80211_vif | | private data | | | | ath12k_vif(ahvif) | | | | +-------------------------------+ | |ath12k_link_vif deflink (arvif)| | | +---------------+ | | | | *ar(2GHz) | | | +-------------------------------+ | +-------------------------------+ | | ath12k_link_vif *link (arvif)| | | +---------------+ | | | | *ar(5GHz) | | | +-------------------------------+ | +-------------------------------+ | | ath12k_link_vif *link (arvif)| | | +---------------+ | | | | *ar(6GHz) | | | +-------------------------------+ | | +---------------------------------+ To refactor existing ath12k_vif to make use of link vifs, following changes are made: 1. ath12k_vif now called by variable name ahvif storing multiple arvifs (struct ah12k_link_vif) and also has a back pointer to ieee80211_vif. 2. In this patch set, only deflink is used to be on par with the existing code. When MLO support is added the link id will be used to fetch the arvif. 3. For mac80211 ops which doesn't use specific link_id, the config or info is common for the vif, hence apply the config to all link vifs. The links_map in the ahvif, will be used to identify all the link vifs that are setup. 4. Change ath12k_vif_to_arvif() as ath12k_vif_to_ahvif() to fetch the hw level vif. The link vif can be fetched from ahvif->link[], or the deflink can be accessed via ahvif->deflink. API to access link vif (arvif) by passing link_id can be introduced with MLO Support. 5. The ieee80211_vif can be accessed from ahvif using ath12k_ahvif_to_vif(). The locking continues to use wiphy_lock() for protecting access to most data in struct ath12k&co, there are no changes in that regard. Though struct ath12k_vif::link[] is protected with RCU. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Co-developed-by: Rameshkumar Sundaram <quic_ramess@quicinc.com> Signed-off-by: Rameshkumar Sundaram <quic_ramess@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20241015171416.518022-2-kvalo@kernel.org Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
2024-10-15 20:14:06 +03:00
memcpy(offload->mac_addr, ahvif->vif->addr, ETH_ALEN);
ath12k_wow_prepare_ns_offload(arvif, offload);
ath12k_wow_prepare_arp_offload(arvif, offload);
ret = ath12k_wmi_arp_ns_offload(ar, arvif, offload, enable);
if (ret) {
ath12k_warn(ar->ab, "failed to set arp ns offload vdev %i: enable %d, ret %d\n",
arvif->vdev_id, enable, ret);
return ret;
}
}
kfree(offload);
return 0;
}
static int ath12k_gtk_rekey_offload(struct ath12k *ar, bool enable)
{
wifi: ath12k: prepare vif data structure for MLO handling To prepare the driver for MLO support, split the driver vif data structure to scale for multiple links. This requires changing the use of arvif to per link and not per hw which can now comprise of multiple links. Also since most configurations from mac80211 are done per link, do refactoring of the driver functions to apply these configurations at link level. Split ath12k_vif which is the driver private of ieee80211_vif to store link specific information as ath12k_link_vif. For default use cases the ath12k vif will have a preallocated link vif called deflink which will be used by non ML and the first link vif of ML vif. With MLO support to be added, remaining link vifs will be allocated during channel assignment where vdev create/start happens. These link vifs will be freed during interface down. Current ath12k_vif(arvif) structure +---------------+ +---------------+ +---------------+ | ieee80211_vif | | ieee80211_vif | | ieee80211_vif | | private data | | private data | | private data | | | | | | | | ath12k_vif | | ath12k_vif | | ath12k_vif | | (arvif) | | (arvif) | | (arvif) | | | | | | | | +----------+ | | +----------+ | | +----------+ | | |*ar (2GHz)| | | |*ar (5GHz)| | | |*ar (2GHz)| | | +----------+ | | +----------+ | | +----------+ | | | | | | | +---------------+ +---------------+ +---------------+ The new ath12k_vif (ahvif) containing ath12k_link_vif(s) (arvif) (deflink is preallocated member which is always the first link if ieee80211_vif is MLD and is the only link otherwise): +---------------------------------+ | ieee80211_vif | | private data | | | | ath12k_vif(ahvif) | | | | +-------------------------------+ | |ath12k_link_vif deflink (arvif)| | | +---------------+ | | | | *ar(2GHz) | | | +-------------------------------+ | +-------------------------------+ | | ath12k_link_vif *link (arvif)| | | +---------------+ | | | | *ar(5GHz) | | | +-------------------------------+ | +-------------------------------+ | | ath12k_link_vif *link (arvif)| | | +---------------+ | | | | *ar(6GHz) | | | +-------------------------------+ | | +---------------------------------+ To refactor existing ath12k_vif to make use of link vifs, following changes are made: 1. ath12k_vif now called by variable name ahvif storing multiple arvifs (struct ah12k_link_vif) and also has a back pointer to ieee80211_vif. 2. In this patch set, only deflink is used to be on par with the existing code. When MLO support is added the link id will be used to fetch the arvif. 3. For mac80211 ops which doesn't use specific link_id, the config or info is common for the vif, hence apply the config to all link vifs. The links_map in the ahvif, will be used to identify all the link vifs that are setup. 4. Change ath12k_vif_to_arvif() as ath12k_vif_to_ahvif() to fetch the hw level vif. The link vif can be fetched from ahvif->link[], or the deflink can be accessed via ahvif->deflink. API to access link vif (arvif) by passing link_id can be introduced with MLO Support. 5. The ieee80211_vif can be accessed from ahvif using ath12k_ahvif_to_vif(). The locking continues to use wiphy_lock() for protecting access to most data in struct ath12k&co, there are no changes in that regard. Though struct ath12k_vif::link[] is protected with RCU. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Co-developed-by: Rameshkumar Sundaram <quic_ramess@quicinc.com> Signed-off-by: Rameshkumar Sundaram <quic_ramess@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20241015171416.518022-2-kvalo@kernel.org Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
2024-10-15 20:14:06 +03:00
struct ath12k_link_vif *arvif;
int ret;
lockdep_assert_wiphy(ath12k_ar_to_hw(ar)->wiphy);
list_for_each_entry(arvif, &ar->arvifs, list) {
wifi: ath12k: prepare vif data structure for MLO handling To prepare the driver for MLO support, split the driver vif data structure to scale for multiple links. This requires changing the use of arvif to per link and not per hw which can now comprise of multiple links. Also since most configurations from mac80211 are done per link, do refactoring of the driver functions to apply these configurations at link level. Split ath12k_vif which is the driver private of ieee80211_vif to store link specific information as ath12k_link_vif. For default use cases the ath12k vif will have a preallocated link vif called deflink which will be used by non ML and the first link vif of ML vif. With MLO support to be added, remaining link vifs will be allocated during channel assignment where vdev create/start happens. These link vifs will be freed during interface down. Current ath12k_vif(arvif) structure +---------------+ +---------------+ +---------------+ | ieee80211_vif | | ieee80211_vif | | ieee80211_vif | | private data | | private data | | private data | | | | | | | | ath12k_vif | | ath12k_vif | | ath12k_vif | | (arvif) | | (arvif) | | (arvif) | | | | | | | | +----------+ | | +----------+ | | +----------+ | | |*ar (2GHz)| | | |*ar (5GHz)| | | |*ar (2GHz)| | | +----------+ | | +----------+ | | +----------+ | | | | | | | +---------------+ +---------------+ +---------------+ The new ath12k_vif (ahvif) containing ath12k_link_vif(s) (arvif) (deflink is preallocated member which is always the first link if ieee80211_vif is MLD and is the only link otherwise): +---------------------------------+ | ieee80211_vif | | private data | | | | ath12k_vif(ahvif) | | | | +-------------------------------+ | |ath12k_link_vif deflink (arvif)| | | +---------------+ | | | | *ar(2GHz) | | | +-------------------------------+ | +-------------------------------+ | | ath12k_link_vif *link (arvif)| | | +---------------+ | | | | *ar(5GHz) | | | +-------------------------------+ | +-------------------------------+ | | ath12k_link_vif *link (arvif)| | | +---------------+ | | | | *ar(6GHz) | | | +-------------------------------+ | | +---------------------------------+ To refactor existing ath12k_vif to make use of link vifs, following changes are made: 1. ath12k_vif now called by variable name ahvif storing multiple arvifs (struct ah12k_link_vif) and also has a back pointer to ieee80211_vif. 2. In this patch set, only deflink is used to be on par with the existing code. When MLO support is added the link id will be used to fetch the arvif. 3. For mac80211 ops which doesn't use specific link_id, the config or info is common for the vif, hence apply the config to all link vifs. The links_map in the ahvif, will be used to identify all the link vifs that are setup. 4. Change ath12k_vif_to_arvif() as ath12k_vif_to_ahvif() to fetch the hw level vif. The link vif can be fetched from ahvif->link[], or the deflink can be accessed via ahvif->deflink. API to access link vif (arvif) by passing link_id can be introduced with MLO Support. 5. The ieee80211_vif can be accessed from ahvif using ath12k_ahvif_to_vif(). The locking continues to use wiphy_lock() for protecting access to most data in struct ath12k&co, there are no changes in that regard. Though struct ath12k_vif::link[] is protected with RCU. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Co-developed-by: Rameshkumar Sundaram <quic_ramess@quicinc.com> Signed-off-by: Rameshkumar Sundaram <quic_ramess@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20241015171416.518022-2-kvalo@kernel.org Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
2024-10-15 20:14:06 +03:00
if (arvif->ahvif->vdev_type != WMI_VDEV_TYPE_STA ||
!arvif->is_up ||
!arvif->rekey_data.enable_offload)
continue;
/* get rekey info before disable rekey offload */
if (!enable) {
ret = ath12k_wmi_gtk_rekey_getinfo(ar, arvif);
if (ret) {
ath12k_warn(ar->ab, "failed to request rekey info vdev %i, ret %d\n",
arvif->vdev_id, ret);
return ret;
}
}
ret = ath12k_wmi_gtk_rekey_offload(ar, arvif, enable);
if (ret) {
ath12k_warn(ar->ab, "failed to offload gtk reky vdev %i: enable %d, ret %d\n",
arvif->vdev_id, enable, ret);
return ret;
}
}
return 0;
}
static int ath12k_wow_protocol_offload(struct ath12k *ar, bool enable)
{
int ret;
ret = ath12k_wow_arp_ns_offload(ar, enable);
if (ret) {
ath12k_warn(ar->ab, "failed to offload ARP and NS %d %d\n",
enable, ret);
return ret;
}
ret = ath12k_gtk_rekey_offload(ar, enable);
if (ret) {
ath12k_warn(ar->ab, "failed to offload gtk rekey %d %d\n",
enable, ret);
return ret;
}
return 0;
}
static int ath12k_wow_set_keepalive(struct ath12k *ar,
enum wmi_sta_keepalive_method method,
u32 interval)
{
wifi: ath12k: prepare vif data structure for MLO handling To prepare the driver for MLO support, split the driver vif data structure to scale for multiple links. This requires changing the use of arvif to per link and not per hw which can now comprise of multiple links. Also since most configurations from mac80211 are done per link, do refactoring of the driver functions to apply these configurations at link level. Split ath12k_vif which is the driver private of ieee80211_vif to store link specific information as ath12k_link_vif. For default use cases the ath12k vif will have a preallocated link vif called deflink which will be used by non ML and the first link vif of ML vif. With MLO support to be added, remaining link vifs will be allocated during channel assignment where vdev create/start happens. These link vifs will be freed during interface down. Current ath12k_vif(arvif) structure +---------------+ +---------------+ +---------------+ | ieee80211_vif | | ieee80211_vif | | ieee80211_vif | | private data | | private data | | private data | | | | | | | | ath12k_vif | | ath12k_vif | | ath12k_vif | | (arvif) | | (arvif) | | (arvif) | | | | | | | | +----------+ | | +----------+ | | +----------+ | | |*ar (2GHz)| | | |*ar (5GHz)| | | |*ar (2GHz)| | | +----------+ | | +----------+ | | +----------+ | | | | | | | +---------------+ +---------------+ +---------------+ The new ath12k_vif (ahvif) containing ath12k_link_vif(s) (arvif) (deflink is preallocated member which is always the first link if ieee80211_vif is MLD and is the only link otherwise): +---------------------------------+ | ieee80211_vif | | private data | | | | ath12k_vif(ahvif) | | | | +-------------------------------+ | |ath12k_link_vif deflink (arvif)| | | +---------------+ | | | | *ar(2GHz) | | | +-------------------------------+ | +-------------------------------+ | | ath12k_link_vif *link (arvif)| | | +---------------+ | | | | *ar(5GHz) | | | +-------------------------------+ | +-------------------------------+ | | ath12k_link_vif *link (arvif)| | | +---------------+ | | | | *ar(6GHz) | | | +-------------------------------+ | | +---------------------------------+ To refactor existing ath12k_vif to make use of link vifs, following changes are made: 1. ath12k_vif now called by variable name ahvif storing multiple arvifs (struct ah12k_link_vif) and also has a back pointer to ieee80211_vif. 2. In this patch set, only deflink is used to be on par with the existing code. When MLO support is added the link id will be used to fetch the arvif. 3. For mac80211 ops which doesn't use specific link_id, the config or info is common for the vif, hence apply the config to all link vifs. The links_map in the ahvif, will be used to identify all the link vifs that are setup. 4. Change ath12k_vif_to_arvif() as ath12k_vif_to_ahvif() to fetch the hw level vif. The link vif can be fetched from ahvif->link[], or the deflink can be accessed via ahvif->deflink. API to access link vif (arvif) by passing link_id can be introduced with MLO Support. 5. The ieee80211_vif can be accessed from ahvif using ath12k_ahvif_to_vif(). The locking continues to use wiphy_lock() for protecting access to most data in struct ath12k&co, there are no changes in that regard. Though struct ath12k_vif::link[] is protected with RCU. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Co-developed-by: Rameshkumar Sundaram <quic_ramess@quicinc.com> Signed-off-by: Rameshkumar Sundaram <quic_ramess@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20241015171416.518022-2-kvalo@kernel.org Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
2024-10-15 20:14:06 +03:00
struct ath12k_link_vif *arvif;
int ret;
lockdep_assert_wiphy(ath12k_ar_to_hw(ar)->wiphy);
list_for_each_entry(arvif, &ar->arvifs, list) {
ret = ath12k_mac_vif_set_keepalive(arvif, method, interval);
if (ret)
return ret;
}
return 0;
}
int ath12k_wow_op_suspend(struct ieee80211_hw *hw,
struct cfg80211_wowlan *wowlan)
{
struct ath12k_hw *ah = ath12k_hw_to_ah(hw);
struct ath12k *ar = ath12k_ah_to_ar(ah, 0);
int ret;
lockdep_assert_wiphy(hw->wiphy);
ret = ath12k_wow_cleanup(ar);
if (ret) {
ath12k_warn(ar->ab, "failed to clear wow wakeup events: %d\n",
ret);
goto exit;
}
ret = ath12k_wow_set_wakeups(ar, wowlan);
if (ret) {
ath12k_warn(ar->ab, "failed to set wow wakeup events: %d\n",
ret);
goto cleanup;
}
ret = ath12k_wow_protocol_offload(ar, true);
if (ret) {
ath12k_warn(ar->ab, "failed to set wow protocol offload events: %d\n",
ret);
goto cleanup;
}
ret = ath12k_mac_wait_tx_complete(ar);
if (ret) {
ath12k_warn(ar->ab, "failed to wait tx complete: %d\n", ret);
goto cleanup;
}
ret = ath12k_wow_set_hw_filter(ar);
if (ret) {
ath12k_warn(ar->ab, "failed to set hw filter: %d\n",
ret);
goto cleanup;
}
ret = ath12k_wow_set_keepalive(ar,
WMI_STA_KEEPALIVE_METHOD_NULL_FRAME,
WMI_STA_KEEPALIVE_INTERVAL_DEFAULT);
if (ret) {
ath12k_warn(ar->ab, "failed to enable wow keepalive: %d\n", ret);
goto cleanup;
}
ret = ath12k_wow_enable(ar);
if (ret) {
ath12k_warn(ar->ab, "failed to start wow: %d\n", ret);
goto cleanup;
}
ath12k_hif_irq_disable(ar->ab);
ath12k_hif_ce_irq_disable(ar->ab);
ret = ath12k_hif_suspend(ar->ab);
if (ret) {
ath12k_warn(ar->ab, "failed to suspend hif: %d\n", ret);
goto wakeup;
}
goto exit;
wakeup:
ath12k_wow_wakeup(ar);
cleanup:
ath12k_wow_cleanup(ar);
exit:
return ret ? 1 : 0;
}
void ath12k_wow_op_set_wakeup(struct ieee80211_hw *hw, bool enabled)
{
struct ath12k_hw *ah = ath12k_hw_to_ah(hw);
struct ath12k *ar = ath12k_ah_to_ar(ah, 0);
lockdep_assert_wiphy(hw->wiphy);
device_set_wakeup_enable(ar->ab->dev, enabled);
}
int ath12k_wow_op_resume(struct ieee80211_hw *hw)
{
struct ath12k_hw *ah = ath12k_hw_to_ah(hw);
struct ath12k *ar = ath12k_ah_to_ar(ah, 0);
int ret;
lockdep_assert_wiphy(hw->wiphy);
ret = ath12k_hif_resume(ar->ab);
if (ret) {
ath12k_warn(ar->ab, "failed to resume hif: %d\n", ret);
goto exit;
}
ath12k_hif_ce_irq_enable(ar->ab);
ath12k_hif_irq_enable(ar->ab);
ret = ath12k_wow_wakeup(ar);
if (ret) {
ath12k_warn(ar->ab, "failed to wakeup from wow: %d\n", ret);
goto exit;
}
ret = ath12k_wow_nlo_cleanup(ar);
if (ret) {
ath12k_warn(ar->ab, "failed to cleanup nlo: %d\n", ret);
goto exit;
}
ret = ath12k_wow_clear_hw_filter(ar);
if (ret) {
ath12k_warn(ar->ab, "failed to clear hw filter: %d\n", ret);
goto exit;
}
ret = ath12k_wow_protocol_offload(ar, false);
if (ret) {
ath12k_warn(ar->ab, "failed to clear wow protocol offload events: %d\n",
ret);
goto exit;
}
ret = ath12k_wow_set_keepalive(ar,
WMI_STA_KEEPALIVE_METHOD_NULL_FRAME,
WMI_STA_KEEPALIVE_INTERVAL_DISABLE);
if (ret) {
ath12k_warn(ar->ab, "failed to disable wow keepalive: %d\n", ret);
goto exit;
}
exit:
if (ret) {
switch (ah->state) {
case ATH12K_HW_STATE_ON:
ah->state = ATH12K_HW_STATE_RESTARTING;
ret = 1;
break;
case ATH12K_HW_STATE_OFF:
case ATH12K_HW_STATE_RESTARTING:
case ATH12K_HW_STATE_RESTARTED:
case ATH12K_HW_STATE_WEDGED:
case ATH12K_HW_STATE_TM:
ath12k_warn(ar->ab, "encountered unexpected device state %d on resume, cannot recover\n",
ah->state);
ret = -EIO;
break;
}
}
return ret;
}
int ath12k_wow_init(struct ath12k *ar)
{
if (!test_bit(WMI_TLV_SERVICE_WOW, ar->wmi->wmi_ab->svc_map))
return 0;
ar->wow.wowlan_support = ath12k_wowlan_support;
if (ar->ab->wow.wmi_conf_rx_decap_mode == ATH12K_HW_TXRX_NATIVE_WIFI) {
ar->wow.wowlan_support.pattern_max_len -= WOW_MAX_REDUCE;
ar->wow.wowlan_support.max_pkt_offset -= WOW_MAX_REDUCE;
}
if (test_bit(WMI_TLV_SERVICE_NLO, ar->wmi->wmi_ab->svc_map)) {
ar->wow.wowlan_support.flags |= WIPHY_WOWLAN_NET_DETECT;
ar->wow.wowlan_support.max_nd_match_sets = WMI_PNO_MAX_SUPP_NETWORKS;
}
ar->wow.max_num_patterns = ATH12K_WOW_PATTERNS;
ar->wow.wowlan_support.n_patterns = ar->wow.max_num_patterns;
ar->ah->hw->wiphy->wowlan = &ar->wow.wowlan_support;
device_set_wakeup_capable(ar->ab->dev, true);
return 0;
}