linux/drivers/net/wireless/ath/ath12k/dp_tx.h

42 lines
1.5 KiB
C
Raw Permalink Normal View History

wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices ath12k is a new mac80211 driver for Qualcomm Wi-Fi 7 devices, first supporting QCN9274 and WCN7850 PCI devices. QCN9274 supports both AP and station; WCN7850 supports only station mode. Monitor mode is not (yet) supported. Only PCI bus devices are supported. ath12k is forked from an earlier version of ath11k. It was simpler to have a "clean start" for the new generation and not try to share the code with ath11k. This makes maintenance easier and avoids major changes in ath11k, which would have significantly increased the risk of regressions in existing setups. ath12k uses le32 and cpu_to_le32() macros to handle endian conversions, instead of using the firmware byte swap feature utilized by ath11k. There is only one kernel module, named ath12k.ko. Currently ath12k only supports HE mode (IEEE 802.11ax) or older, but work is ongoing to add EHT mode (IEEE 802.11be) support. The size of the driver is ~41 kLOC and 45 files. To make the review easier, this initial version of ath12k does not support Device Tree, debugfs or any other extra features. Those will be added later, after ath12k is accepted to upstream. The driver is build tested by Intel's kernel test robot with both GCC and Clang. Sparse reports no warnings. The driver is mostly free of checkpatch warnings, albeit few of the warnings are omitted on purpose, list of them here: https://github.com/qca/qca-swiss-army-knife/blob/master/tools/scripts/ath12k/ath12k-check#L52 The driver has had multiple authors who are listed in alphabetical order below. Co-developed-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Signed-off-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Co-developed-by: Baochen Qiang <quic_bqiang@quicinc.com> Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Co-developed-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Signed-off-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Co-developed-by: Carl Huang <quic_cjhuang@quicinc.com> Signed-off-by: Carl Huang <quic_cjhuang@quicinc.com> Co-developed-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Co-developed-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Co-developed-by: P Praneesh <quic_ppranees@quicinc.com> Signed-off-by: P Praneesh <quic_ppranees@quicinc.com> Co-developed-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Co-developed-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Signed-off-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Co-developed-by: Sriram R <quic_srirrama@quicinc.com> Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Co-developed-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Signed-off-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Co-developed-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
2022-11-28 17:09:53 +02:00
/* SPDX-License-Identifier: BSD-3-Clause-Clear */
/*
* Copyright (c) 2018-2021 The Linux Foundation. All rights reserved.
wifi: ath12k: Add support for MLO Multicast handling in driver For MLO netdevice, the broadcast frame should be transmitted with the same sequence number on all the links. Per IEEE 802.11be-2024 section 10.3.2.14.2 "Transmitter requirements", An AP MLD shall use SNS11 in Table 10-5 (Transmitter sequence number spaces) maintained by the MLD to determine the sequence number of a group addressed data frame that is transmitted by an AP affiliated with the AP MLD so that the same group addressed Data frame transmitted over multiple links by the AP MLD uses the same sequence number for transmission on each link. Currently the MLO multicast handling is done in the mac80211 layer. Enable support for handling MLO Multicast in the driver to update the hardware descriptors in a custom way to handle the multicast frames. Firmware expects the MLO multicast frames to the submitted to the hardware with special vdev_id (actual vdev_id + 128) to recognize it as a host inspected frame to avoid using the reinjected path and it also uses the multicast global sequence number (GSN) provided by the host in the HTT metadata to process and transmit it with the same sequence number. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Balamurugan Mahalingam <quic_bmahalin@quicinc.com> Reviewed-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com> Link: https://patch.msgid.link/20250203212647.2694566-3-quic_bmahalin@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-02-03 13:26:47 -08:00
* Copyright (c) 2021-2022, 2024-2025 Qualcomm Innovation Center, Inc. All rights reserved.
wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices ath12k is a new mac80211 driver for Qualcomm Wi-Fi 7 devices, first supporting QCN9274 and WCN7850 PCI devices. QCN9274 supports both AP and station; WCN7850 supports only station mode. Monitor mode is not (yet) supported. Only PCI bus devices are supported. ath12k is forked from an earlier version of ath11k. It was simpler to have a "clean start" for the new generation and not try to share the code with ath11k. This makes maintenance easier and avoids major changes in ath11k, which would have significantly increased the risk of regressions in existing setups. ath12k uses le32 and cpu_to_le32() macros to handle endian conversions, instead of using the firmware byte swap feature utilized by ath11k. There is only one kernel module, named ath12k.ko. Currently ath12k only supports HE mode (IEEE 802.11ax) or older, but work is ongoing to add EHT mode (IEEE 802.11be) support. The size of the driver is ~41 kLOC and 45 files. To make the review easier, this initial version of ath12k does not support Device Tree, debugfs or any other extra features. Those will be added later, after ath12k is accepted to upstream. The driver is build tested by Intel's kernel test robot with both GCC and Clang. Sparse reports no warnings. The driver is mostly free of checkpatch warnings, albeit few of the warnings are omitted on purpose, list of them here: https://github.com/qca/qca-swiss-army-knife/blob/master/tools/scripts/ath12k/ath12k-check#L52 The driver has had multiple authors who are listed in alphabetical order below. Co-developed-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Signed-off-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Co-developed-by: Baochen Qiang <quic_bqiang@quicinc.com> Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Co-developed-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Signed-off-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Co-developed-by: Carl Huang <quic_cjhuang@quicinc.com> Signed-off-by: Carl Huang <quic_cjhuang@quicinc.com> Co-developed-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Co-developed-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Co-developed-by: P Praneesh <quic_ppranees@quicinc.com> Signed-off-by: P Praneesh <quic_ppranees@quicinc.com> Co-developed-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Co-developed-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Signed-off-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Co-developed-by: Sriram R <quic_srirrama@quicinc.com> Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Co-developed-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Signed-off-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Co-developed-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
2022-11-28 17:09:53 +02:00
*/
#ifndef ATH12K_DP_TX_H
#define ATH12K_DP_TX_H
#include "core.h"
#include "hal_tx.h"
struct ath12k_dp_htt_wbm_tx_status {
bool acked;
s8 ack_rssi;
wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices ath12k is a new mac80211 driver for Qualcomm Wi-Fi 7 devices, first supporting QCN9274 and WCN7850 PCI devices. QCN9274 supports both AP and station; WCN7850 supports only station mode. Monitor mode is not (yet) supported. Only PCI bus devices are supported. ath12k is forked from an earlier version of ath11k. It was simpler to have a "clean start" for the new generation and not try to share the code with ath11k. This makes maintenance easier and avoids major changes in ath11k, which would have significantly increased the risk of regressions in existing setups. ath12k uses le32 and cpu_to_le32() macros to handle endian conversions, instead of using the firmware byte swap feature utilized by ath11k. There is only one kernel module, named ath12k.ko. Currently ath12k only supports HE mode (IEEE 802.11ax) or older, but work is ongoing to add EHT mode (IEEE 802.11be) support. The size of the driver is ~41 kLOC and 45 files. To make the review easier, this initial version of ath12k does not support Device Tree, debugfs or any other extra features. Those will be added later, after ath12k is accepted to upstream. The driver is build tested by Intel's kernel test robot with both GCC and Clang. Sparse reports no warnings. The driver is mostly free of checkpatch warnings, albeit few of the warnings are omitted on purpose, list of them here: https://github.com/qca/qca-swiss-army-knife/blob/master/tools/scripts/ath12k/ath12k-check#L52 The driver has had multiple authors who are listed in alphabetical order below. Co-developed-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Signed-off-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Co-developed-by: Baochen Qiang <quic_bqiang@quicinc.com> Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Co-developed-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Signed-off-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Co-developed-by: Carl Huang <quic_cjhuang@quicinc.com> Signed-off-by: Carl Huang <quic_cjhuang@quicinc.com> Co-developed-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Co-developed-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Co-developed-by: P Praneesh <quic_ppranees@quicinc.com> Signed-off-by: P Praneesh <quic_ppranees@quicinc.com> Co-developed-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Co-developed-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Signed-off-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Co-developed-by: Sriram R <quic_srirrama@quicinc.com> Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Co-developed-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Signed-off-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Co-developed-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
2022-11-28 17:09:53 +02:00
};
int ath12k_dp_tx_htt_h2t_ver_req_msg(struct ath12k_base *ab);
wifi: ath12k: prepare vif data structure for MLO handling To prepare the driver for MLO support, split the driver vif data structure to scale for multiple links. This requires changing the use of arvif to per link and not per hw which can now comprise of multiple links. Also since most configurations from mac80211 are done per link, do refactoring of the driver functions to apply these configurations at link level. Split ath12k_vif which is the driver private of ieee80211_vif to store link specific information as ath12k_link_vif. For default use cases the ath12k vif will have a preallocated link vif called deflink which will be used by non ML and the first link vif of ML vif. With MLO support to be added, remaining link vifs will be allocated during channel assignment where vdev create/start happens. These link vifs will be freed during interface down. Current ath12k_vif(arvif) structure +---------------+ +---------------+ +---------------+ | ieee80211_vif | | ieee80211_vif | | ieee80211_vif | | private data | | private data | | private data | | | | | | | | ath12k_vif | | ath12k_vif | | ath12k_vif | | (arvif) | | (arvif) | | (arvif) | | | | | | | | +----------+ | | +----------+ | | +----------+ | | |*ar (2GHz)| | | |*ar (5GHz)| | | |*ar (2GHz)| | | +----------+ | | +----------+ | | +----------+ | | | | | | | +---------------+ +---------------+ +---------------+ The new ath12k_vif (ahvif) containing ath12k_link_vif(s) (arvif) (deflink is preallocated member which is always the first link if ieee80211_vif is MLD and is the only link otherwise): +---------------------------------+ | ieee80211_vif | | private data | | | | ath12k_vif(ahvif) | | | | +-------------------------------+ | |ath12k_link_vif deflink (arvif)| | | +---------------+ | | | | *ar(2GHz) | | | +-------------------------------+ | +-------------------------------+ | | ath12k_link_vif *link (arvif)| | | +---------------+ | | | | *ar(5GHz) | | | +-------------------------------+ | +-------------------------------+ | | ath12k_link_vif *link (arvif)| | | +---------------+ | | | | *ar(6GHz) | | | +-------------------------------+ | | +---------------------------------+ To refactor existing ath12k_vif to make use of link vifs, following changes are made: 1. ath12k_vif now called by variable name ahvif storing multiple arvifs (struct ah12k_link_vif) and also has a back pointer to ieee80211_vif. 2. In this patch set, only deflink is used to be on par with the existing code. When MLO support is added the link id will be used to fetch the arvif. 3. For mac80211 ops which doesn't use specific link_id, the config or info is common for the vif, hence apply the config to all link vifs. The links_map in the ahvif, will be used to identify all the link vifs that are setup. 4. Change ath12k_vif_to_arvif() as ath12k_vif_to_ahvif() to fetch the hw level vif. The link vif can be fetched from ahvif->link[], or the deflink can be accessed via ahvif->deflink. API to access link vif (arvif) by passing link_id can be introduced with MLO Support. 5. The ieee80211_vif can be accessed from ahvif using ath12k_ahvif_to_vif(). The locking continues to use wiphy_lock() for protecting access to most data in struct ath12k&co, there are no changes in that regard. Though struct ath12k_vif::link[] is protected with RCU. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Co-developed-by: Rameshkumar Sundaram <quic_ramess@quicinc.com> Signed-off-by: Rameshkumar Sundaram <quic_ramess@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20241015171416.518022-2-kvalo@kernel.org Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
2024-10-15 20:14:06 +03:00
int ath12k_dp_tx(struct ath12k *ar, struct ath12k_link_vif *arvif,
wifi: ath12k: Add support for link specific datapath stats Add support to record the number of frames enqueued, hardware descriptor type, encapsulation/encryption types used, frames dropped and completed. This is useful for understanding the datapath performance and tune the peak throughput. The link specific stats can be viewed through the below debugfs file cat /sys/kernel/debug/ieee80211/phy0/netdev:wlan1/link_stats link[0] Tx Unicast Frames Enqueued = 9 link[0] Tx Broadcast Frames Enqueued = 78689 link[0] Tx Frames Completed = 78698 link[0] Tx Frames Dropped = 0 link[0] Tx Frame descriptor Encap Type = raw:0 native wifi:78698 ethernet:0 link[0] Tx Frame descriptor Encrypt Type = 0:78698 1:0 2:0 3:0 4:0 5:0 6:0 7:0 8:0 9:0 10:0 11:0 link[0] Tx Frame descriptor Type = buffer:78698 extension:0 ------------------------------------------------------ link[1] Tx Unicast Frames Enqueued = 0 link[1] Tx Broadcast Frames Enqueued = 78689 link[1] Tx Frames Completed = 78689 link[1] Tx Frames Dropped = 0 link[1] Tx Frame descriptor Encap Type = raw:0 native wifi:78689 ethernet:0 link[1] Tx Frame descriptor Encrypt Type = 0:78689 1:0 2:0 3:0 4:0 5:0 6:0 7:0 8:0 9:0 10:0 11:0 link[1] Tx Frame descriptor Type = buffer:78689 extension:0 ------------------------------------------------------ Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Balamurugan Mahalingam <quic_bmahalin@quicinc.com> Link: https://patch.msgid.link/20250409155125.299380-1-quic_bmahalin@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-04-09 08:51:25 -07:00
struct sk_buff *skb, bool gsn_valid, int mcbc_gsn,
bool is_mcast);
wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices ath12k is a new mac80211 driver for Qualcomm Wi-Fi 7 devices, first supporting QCN9274 and WCN7850 PCI devices. QCN9274 supports both AP and station; WCN7850 supports only station mode. Monitor mode is not (yet) supported. Only PCI bus devices are supported. ath12k is forked from an earlier version of ath11k. It was simpler to have a "clean start" for the new generation and not try to share the code with ath11k. This makes maintenance easier and avoids major changes in ath11k, which would have significantly increased the risk of regressions in existing setups. ath12k uses le32 and cpu_to_le32() macros to handle endian conversions, instead of using the firmware byte swap feature utilized by ath11k. There is only one kernel module, named ath12k.ko. Currently ath12k only supports HE mode (IEEE 802.11ax) or older, but work is ongoing to add EHT mode (IEEE 802.11be) support. The size of the driver is ~41 kLOC and 45 files. To make the review easier, this initial version of ath12k does not support Device Tree, debugfs or any other extra features. Those will be added later, after ath12k is accepted to upstream. The driver is build tested by Intel's kernel test robot with both GCC and Clang. Sparse reports no warnings. The driver is mostly free of checkpatch warnings, albeit few of the warnings are omitted on purpose, list of them here: https://github.com/qca/qca-swiss-army-knife/blob/master/tools/scripts/ath12k/ath12k-check#L52 The driver has had multiple authors who are listed in alphabetical order below. Co-developed-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Signed-off-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Co-developed-by: Baochen Qiang <quic_bqiang@quicinc.com> Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Co-developed-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Signed-off-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Co-developed-by: Carl Huang <quic_cjhuang@quicinc.com> Signed-off-by: Carl Huang <quic_cjhuang@quicinc.com> Co-developed-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Co-developed-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Co-developed-by: P Praneesh <quic_ppranees@quicinc.com> Signed-off-by: P Praneesh <quic_ppranees@quicinc.com> Co-developed-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Co-developed-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Signed-off-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Co-developed-by: Sriram R <quic_srirrama@quicinc.com> Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Co-developed-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Signed-off-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Co-developed-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
2022-11-28 17:09:53 +02:00
void ath12k_dp_tx_completion_handler(struct ath12k_base *ab, int ring_id);
int ath12k_dp_tx_htt_h2t_ppdu_stats_req(struct ath12k *ar, u32 mask);
int
ath12k_dp_tx_htt_h2t_ext_stats_req(struct ath12k *ar, u8 type,
struct htt_ext_stats_cfg_params *cfg_params,
u64 cookie);
int ath12k_dp_tx_htt_rx_monitor_mode_ring_config(struct ath12k *ar, bool reset);
int ath12k_dp_tx_htt_rx_filter_setup(struct ath12k_base *ab, u32 ring_id,
int mac_id, enum hal_ring_type ring_type,
int rx_buf_size,
struct htt_rx_ring_tlv_filter *tlv_filter);
void ath12k_dp_tx_put_bank_profile(struct ath12k_dp *dp, u8 bank_id);
int ath12k_dp_tx_htt_tx_filter_setup(struct ath12k_base *ab, u32 ring_id,
int mac_id, enum hal_ring_type ring_type,
int tx_buf_size,
struct htt_tx_ring_tlv_filter *htt_tlv_filter);
int ath12k_dp_tx_htt_monitor_mode_ring_config(struct ath12k *ar, bool reset);
#endif