public-mirrors/linux
1
0
Fork 0
mirror of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git synced 2025-08-05 16:54:27 +00:00
Code Issues Projects Releases Packages Wiki Activity Actions
linux/drivers/net/dsa/xrs700x/xrs700x_i2c.c

161 lines
3.5 KiB
C
Raw Permalink Normal View History

net: dsa: add Arrow SpeedChips XRS700x driver Add a driver with initial support for the Arrow SpeedChips XRS7000 series of gigabit Ethernet switch chips which are typically used in critical networking applications. The switches have up to three RGMII ports and one RMII port. Management to the switches can be performed over i2c or mdio. Support for advanced features such as PTP and HSR/PRP (IEC 62439-3 Clause 5 & 4) is not included in this patch and may be added at a later date. Signed-off-by: George McCollister <george.mccollister@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-14 13:57:33 -06:00
// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (C) 2020 NovaTech LLC
* George McCollister <george.mccollister@gmail.com>
*/
#include <linux/bits.h>
#include <linux/i2c.h>
#include <linux/module.h>
#include "xrs700x.h"
#include "xrs700x_reg.h"
net: dsa: xrs700x: Correctly address device over I2C On read, master should send 31 MSB of the register (only even values are ever used), followed by a 1 to indicate read. Then, reading two bytes, the device will output the register's value. On write, master sends 31 MSB of the register, followed by a 0 to indicate write, followed by two bytes containing the register value. Flexibilis' documentation (version 1.3) specifies the opposite polarity (#read/write), but the scope indicates that it is, in fact, read/#write. Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com> Reviewed-by: George McCollister <george.mccollister@gmail.com> Link: https://lore.kernel.org/r/20210202191645.439-1-tobias@waldekranz.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-02 20:16:45 +01:00
struct xrs700x_i2c_cmd {
__be32 reg;
__be16 val;
} __packed;
net: dsa: add Arrow SpeedChips XRS700x driver Add a driver with initial support for the Arrow SpeedChips XRS7000 series of gigabit Ethernet switch chips which are typically used in critical networking applications. The switches have up to three RGMII ports and one RMII port. Management to the switches can be performed over i2c or mdio. Support for advanced features such as PTP and HSR/PRP (IEC 62439-3 Clause 5 & 4) is not included in this patch and may be added at a later date. Signed-off-by: George McCollister <george.mccollister@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-14 13:57:33 -06:00
static int xrs700x_i2c_reg_read(void *context, unsigned int reg,
unsigned int *val)
{
struct device *dev = context;
struct i2c_client *i2c = to_i2c_client(dev);
net: dsa: xrs700x: Correctly address device over I2C On read, master should send 31 MSB of the register (only even values are ever used), followed by a 1 to indicate read. Then, reading two bytes, the device will output the register's value. On write, master sends 31 MSB of the register, followed by a 0 to indicate write, followed by two bytes containing the register value. Flexibilis' documentation (version 1.3) specifies the opposite polarity (#read/write), but the scope indicates that it is, in fact, read/#write. Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com> Reviewed-by: George McCollister <george.mccollister@gmail.com> Link: https://lore.kernel.org/r/20210202191645.439-1-tobias@waldekranz.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-02 20:16:45 +01:00
struct xrs700x_i2c_cmd cmd;
net: dsa: add Arrow SpeedChips XRS700x driver Add a driver with initial support for the Arrow SpeedChips XRS7000 series of gigabit Ethernet switch chips which are typically used in critical networking applications. The switches have up to three RGMII ports and one RMII port. Management to the switches can be performed over i2c or mdio. Support for advanced features such as PTP and HSR/PRP (IEC 62439-3 Clause 5 & 4) is not included in this patch and may be added at a later date. Signed-off-by: George McCollister <george.mccollister@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-14 13:57:33 -06:00
int ret;
net: dsa: xrs700x: Correctly address device over I2C On read, master should send 31 MSB of the register (only even values are ever used), followed by a 1 to indicate read. Then, reading two bytes, the device will output the register's value. On write, master sends 31 MSB of the register, followed by a 0 to indicate write, followed by two bytes containing the register value. Flexibilis' documentation (version 1.3) specifies the opposite polarity (#read/write), but the scope indicates that it is, in fact, read/#write. Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com> Reviewed-by: George McCollister <george.mccollister@gmail.com> Link: https://lore.kernel.org/r/20210202191645.439-1-tobias@waldekranz.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-02 20:16:45 +01:00
cmd.reg = cpu_to_be32(reg | 1);
net: dsa: add Arrow SpeedChips XRS700x driver Add a driver with initial support for the Arrow SpeedChips XRS7000 series of gigabit Ethernet switch chips which are typically used in critical networking applications. The switches have up to three RGMII ports and one RMII port. Management to the switches can be performed over i2c or mdio. Support for advanced features such as PTP and HSR/PRP (IEC 62439-3 Clause 5 & 4) is not included in this patch and may be added at a later date. Signed-off-by: George McCollister <george.mccollister@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-14 13:57:33 -06:00
net: dsa: xrs700x: Correctly address device over I2C On read, master should send 31 MSB of the register (only even values are ever used), followed by a 1 to indicate read. Then, reading two bytes, the device will output the register's value. On write, master sends 31 MSB of the register, followed by a 0 to indicate write, followed by two bytes containing the register value. Flexibilis' documentation (version 1.3) specifies the opposite polarity (#read/write), but the scope indicates that it is, in fact, read/#write. Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com> Reviewed-by: George McCollister <george.mccollister@gmail.com> Link: https://lore.kernel.org/r/20210202191645.439-1-tobias@waldekranz.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-02 20:16:45 +01:00
ret = i2c_master_send(i2c, (char *)&cmd.reg, sizeof(cmd.reg));
net: dsa: add Arrow SpeedChips XRS700x driver Add a driver with initial support for the Arrow SpeedChips XRS7000 series of gigabit Ethernet switch chips which are typically used in critical networking applications. The switches have up to three RGMII ports and one RMII port. Management to the switches can be performed over i2c or mdio. Support for advanced features such as PTP and HSR/PRP (IEC 62439-3 Clause 5 & 4) is not included in this patch and may be added at a later date. Signed-off-by: George McCollister <george.mccollister@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-14 13:57:33 -06:00
if (ret < 0) {
dev_err(dev, "xrs i2c_master_send returned %d\n", ret);
return ret;
}
net: dsa: xrs700x: Correctly address device over I2C On read, master should send 31 MSB of the register (only even values are ever used), followed by a 1 to indicate read. Then, reading two bytes, the device will output the register's value. On write, master sends 31 MSB of the register, followed by a 0 to indicate write, followed by two bytes containing the register value. Flexibilis' documentation (version 1.3) specifies the opposite polarity (#read/write), but the scope indicates that it is, in fact, read/#write. Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com> Reviewed-by: George McCollister <george.mccollister@gmail.com> Link: https://lore.kernel.org/r/20210202191645.439-1-tobias@waldekranz.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-02 20:16:45 +01:00
ret = i2c_master_recv(i2c, (char *)&cmd.val, sizeof(cmd.val));
net: dsa: add Arrow SpeedChips XRS700x driver Add a driver with initial support for the Arrow SpeedChips XRS7000 series of gigabit Ethernet switch chips which are typically used in critical networking applications. The switches have up to three RGMII ports and one RMII port. Management to the switches can be performed over i2c or mdio. Support for advanced features such as PTP and HSR/PRP (IEC 62439-3 Clause 5 & 4) is not included in this patch and may be added at a later date. Signed-off-by: George McCollister <george.mccollister@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-14 13:57:33 -06:00
if (ret < 0) {
dev_err(dev, "xrs i2c_master_recv returned %d\n", ret);
return ret;
}
net: dsa: xrs700x: Correctly address device over I2C On read, master should send 31 MSB of the register (only even values are ever used), followed by a 1 to indicate read. Then, reading two bytes, the device will output the register's value. On write, master sends 31 MSB of the register, followed by a 0 to indicate write, followed by two bytes containing the register value. Flexibilis' documentation (version 1.3) specifies the opposite polarity (#read/write), but the scope indicates that it is, in fact, read/#write. Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com> Reviewed-by: George McCollister <george.mccollister@gmail.com> Link: https://lore.kernel.org/r/20210202191645.439-1-tobias@waldekranz.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-02 20:16:45 +01:00
*val = be16_to_cpu(cmd.val);
net: dsa: add Arrow SpeedChips XRS700x driver Add a driver with initial support for the Arrow SpeedChips XRS7000 series of gigabit Ethernet switch chips which are typically used in critical networking applications. The switches have up to three RGMII ports and one RMII port. Management to the switches can be performed over i2c or mdio. Support for advanced features such as PTP and HSR/PRP (IEC 62439-3 Clause 5 & 4) is not included in this patch and may be added at a later date. Signed-off-by: George McCollister <george.mccollister@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-14 13:57:33 -06:00
return 0;
}
static int xrs700x_i2c_reg_write(void *context, unsigned int reg,
unsigned int val)
{
struct device *dev = context;
struct i2c_client *i2c = to_i2c_client(dev);
net: dsa: xrs700x: Correctly address device over I2C On read, master should send 31 MSB of the register (only even values are ever used), followed by a 1 to indicate read. Then, reading two bytes, the device will output the register's value. On write, master sends 31 MSB of the register, followed by a 0 to indicate write, followed by two bytes containing the register value. Flexibilis' documentation (version 1.3) specifies the opposite polarity (#read/write), but the scope indicates that it is, in fact, read/#write. Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com> Reviewed-by: George McCollister <george.mccollister@gmail.com> Link: https://lore.kernel.org/r/20210202191645.439-1-tobias@waldekranz.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-02 20:16:45 +01:00
struct xrs700x_i2c_cmd cmd;
net: dsa: add Arrow SpeedChips XRS700x driver Add a driver with initial support for the Arrow SpeedChips XRS7000 series of gigabit Ethernet switch chips which are typically used in critical networking applications. The switches have up to three RGMII ports and one RMII port. Management to the switches can be performed over i2c or mdio. Support for advanced features such as PTP and HSR/PRP (IEC 62439-3 Clause 5 & 4) is not included in this patch and may be added at a later date. Signed-off-by: George McCollister <george.mccollister@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-14 13:57:33 -06:00
int ret;
net: dsa: xrs700x: Correctly address device over I2C On read, master should send 31 MSB of the register (only even values are ever used), followed by a 1 to indicate read. Then, reading two bytes, the device will output the register's value. On write, master sends 31 MSB of the register, followed by a 0 to indicate write, followed by two bytes containing the register value. Flexibilis' documentation (version 1.3) specifies the opposite polarity (#read/write), but the scope indicates that it is, in fact, read/#write. Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com> Reviewed-by: George McCollister <george.mccollister@gmail.com> Link: https://lore.kernel.org/r/20210202191645.439-1-tobias@waldekranz.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-02 20:16:45 +01:00
cmd.reg = cpu_to_be32(reg);
cmd.val = cpu_to_be16(val);
net: dsa: add Arrow SpeedChips XRS700x driver Add a driver with initial support for the Arrow SpeedChips XRS7000 series of gigabit Ethernet switch chips which are typically used in critical networking applications. The switches have up to three RGMII ports and one RMII port. Management to the switches can be performed over i2c or mdio. Support for advanced features such as PTP and HSR/PRP (IEC 62439-3 Clause 5 & 4) is not included in this patch and may be added at a later date. Signed-off-by: George McCollister <george.mccollister@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-14 13:57:33 -06:00
net: dsa: xrs700x: Correctly address device over I2C On read, master should send 31 MSB of the register (only even values are ever used), followed by a 1 to indicate read. Then, reading two bytes, the device will output the register's value. On write, master sends 31 MSB of the register, followed by a 0 to indicate write, followed by two bytes containing the register value. Flexibilis' documentation (version 1.3) specifies the opposite polarity (#read/write), but the scope indicates that it is, in fact, read/#write. Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com> Reviewed-by: George McCollister <george.mccollister@gmail.com> Link: https://lore.kernel.org/r/20210202191645.439-1-tobias@waldekranz.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-02 20:16:45 +01:00
ret = i2c_master_send(i2c, (char *)&cmd, sizeof(cmd));
net: dsa: add Arrow SpeedChips XRS700x driver Add a driver with initial support for the Arrow SpeedChips XRS7000 series of gigabit Ethernet switch chips which are typically used in critical networking applications. The switches have up to three RGMII ports and one RMII port. Management to the switches can be performed over i2c or mdio. Support for advanced features such as PTP and HSR/PRP (IEC 62439-3 Clause 5 & 4) is not included in this patch and may be added at a later date. Signed-off-by: George McCollister <george.mccollister@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-14 13:57:33 -06:00
if (ret < 0) {
dev_err(dev, "xrs i2c_master_send returned %d\n", ret);
return ret;
}
return 0;
}
static const struct regmap_config xrs700x_i2c_regmap_config = {
.val_bits = 16,
.reg_stride = 2,
.reg_bits = 32,
.pad_bits = 0,
.write_flag_mask = 0,
.read_flag_mask = 0,
.reg_read = xrs700x_i2c_reg_read,
.reg_write = xrs700x_i2c_reg_write,
.max_register = 0,
.cache_type = REGCACHE_NONE,
.reg_format_endian = REGMAP_ENDIAN_BIG,
.val_format_endian = REGMAP_ENDIAN_BIG
};
net: dsa: xrs700x: Convert to i2c's .probe_new() The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-22 20:54:58 -08:00
static int xrs700x_i2c_probe(struct i2c_client *i2c)
net: dsa: add Arrow SpeedChips XRS700x driver Add a driver with initial support for the Arrow SpeedChips XRS7000 series of gigabit Ethernet switch chips which are typically used in critical networking applications. The switches have up to three RGMII ports and one RMII port. Management to the switches can be performed over i2c or mdio. Support for advanced features such as PTP and HSR/PRP (IEC 62439-3 Clause 5 & 4) is not included in this patch and may be added at a later date. Signed-off-by: George McCollister <george.mccollister@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-14 13:57:33 -06:00
{
struct xrs700x *priv;
int ret;
priv = xrs700x_switch_alloc(&i2c->dev, i2c);
if (!priv)
return -ENOMEM;
priv->regmap = devm_regmap_init(&i2c->dev, NULL, &i2c->dev,
&xrs700x_i2c_regmap_config);
if (IS_ERR(priv->regmap)) {
ret = PTR_ERR(priv->regmap);
dev_err(&i2c->dev, "Failed to initialize regmap: %d\n", ret);
return ret;
}
i2c_set_clientdata(i2c, priv);
ret = xrs700x_switch_register(priv);
/* Main DSA driver may not be started yet. */
if (ret)
return ret;
return 0;
}
i2c: Make remove callback return void The value returned by an i2c driver's remove function is mostly ignored. (Only an error message is printed if the value is non-zero that the error is ignored.) So change the prototype of the remove function to return no value. This way driver authors are not tempted to assume that passing an error to the upper layer is a good idea. All drivers are adapted accordingly. There is no intended change of behaviour, all callbacks were prepared to return 0 before. Reviewed-by: Peter Senna Tschudin <peter.senna@gmail.com> Reviewed-by: Jeremy Kerr <jk@codeconstruct.com.au> Reviewed-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Crt Mori <cmo@melexis.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Marek Behún <kabel@kernel.org> # for leds-turris-omnia Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Petr Machata <petrm@nvidia.com> # for mlxsw Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com> # for surface3_power Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> # for bmc150-accel-i2c + kxcjk-1013 Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> # for media/* + staging/media/* Acked-by: Miguel Ojeda <ojeda@kernel.org> # for auxdisplay/ht16k33 + auxdisplay/lcd2s Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # for versaclock5 Reviewed-by: Ajay Gupta <ajayg@nvidia.com> # for ucsi_ccg Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # for iio Acked-by: Peter Rosin <peda@axentia.se> # for i2c-mux-*, max9860 Acked-by: Adrien Grassein <adrien.grassein@gmail.com> # for lontium-lt8912b Reviewed-by: Jean Delvare <jdelvare@suse.de> # for hwmon, i2c-core and i2c/muxes Acked-by: Corey Minyard <cminyard@mvista.com> # for IPMI Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> # for drivers/power Acked-by: Krzysztof Hałasa <khalasa@piap.pl> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-08-15 10:02:30 +02:00
static void xrs700x_i2c_remove(struct i2c_client *i2c)
net: dsa: add Arrow SpeedChips XRS700x driver Add a driver with initial support for the Arrow SpeedChips XRS7000 series of gigabit Ethernet switch chips which are typically used in critical networking applications. The switches have up to three RGMII ports and one RMII port. Management to the switches can be performed over i2c or mdio. Support for advanced features such as PTP and HSR/PRP (IEC 62439-3 Clause 5 & 4) is not included in this patch and may be added at a later date. Signed-off-by: George McCollister <george.mccollister@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-14 13:57:33 -06:00
{
struct xrs700x *priv = i2c_get_clientdata(i2c);
net: dsa: xrs700x: be compatible with masters which unregister on shutdown Since commit 2f1e8ea726e9 ("net: dsa: link interfaces with the DSA master to get rid of lockdep warnings"), DSA gained a requirement which it did not fulfill, which is to unlink itself from the DSA master at shutdown time. Since the Arrow SpeedChips XRS700x driver was introduced after the bad commit, it has never worked with DSA masters which decide to unregister their net_device on shutdown, effectively hanging the reboot process. To fix that, we need to call dsa_switch_shutdown. These devices can be connected by I2C or by MDIO, and if I search for I2C or MDIO bus drivers that implement their ->shutdown by redirecting it to ->remove I don't see any, however this does not mean it would not be possible. To be compatible with that pattern, it is necessary to implement an "if this then not that" scheme, to avoid ->remove and ->shutdown from being called both for the same struct device. Fixes: ee00b24f32eb ("net: dsa: add Arrow SpeedChips XRS700x driver") Link: https://lore.kernel.org/netdev/20210909095324.12978-1-LinoSanfilippo@gmx.de/ Reported-by: Lino Sanfilippo <LinoSanfilippo@gmx.de> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: George McCollister <george.mccollister@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-17 16:34:36 +03:00
if (!priv)
i2c: Make remove callback return void The value returned by an i2c driver's remove function is mostly ignored. (Only an error message is printed if the value is non-zero that the error is ignored.) So change the prototype of the remove function to return no value. This way driver authors are not tempted to assume that passing an error to the upper layer is a good idea. All drivers are adapted accordingly. There is no intended change of behaviour, all callbacks were prepared to return 0 before. Reviewed-by: Peter Senna Tschudin <peter.senna@gmail.com> Reviewed-by: Jeremy Kerr <jk@codeconstruct.com.au> Reviewed-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Crt Mori <cmo@melexis.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Marek Behún <kabel@kernel.org> # for leds-turris-omnia Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Petr Machata <petrm@nvidia.com> # for mlxsw Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com> # for surface3_power Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> # for bmc150-accel-i2c + kxcjk-1013 Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> # for media/* + staging/media/* Acked-by: Miguel Ojeda <ojeda@kernel.org> # for auxdisplay/ht16k33 + auxdisplay/lcd2s Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # for versaclock5 Reviewed-by: Ajay Gupta <ajayg@nvidia.com> # for ucsi_ccg Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # for iio Acked-by: Peter Rosin <peda@axentia.se> # for i2c-mux-*, max9860 Acked-by: Adrien Grassein <adrien.grassein@gmail.com> # for lontium-lt8912b Reviewed-by: Jean Delvare <jdelvare@suse.de> # for hwmon, i2c-core and i2c/muxes Acked-by: Corey Minyard <cminyard@mvista.com> # for IPMI Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> # for drivers/power Acked-by: Krzysztof Hałasa <khalasa@piap.pl> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-08-15 10:02:30 +02:00
return;
net: dsa: xrs700x: be compatible with masters which unregister on shutdown Since commit 2f1e8ea726e9 ("net: dsa: link interfaces with the DSA master to get rid of lockdep warnings"), DSA gained a requirement which it did not fulfill, which is to unlink itself from the DSA master at shutdown time. Since the Arrow SpeedChips XRS700x driver was introduced after the bad commit, it has never worked with DSA masters which decide to unregister their net_device on shutdown, effectively hanging the reboot process. To fix that, we need to call dsa_switch_shutdown. These devices can be connected by I2C or by MDIO, and if I search for I2C or MDIO bus drivers that implement their ->shutdown by redirecting it to ->remove I don't see any, however this does not mean it would not be possible. To be compatible with that pattern, it is necessary to implement an "if this then not that" scheme, to avoid ->remove and ->shutdown from being called both for the same struct device. Fixes: ee00b24f32eb ("net: dsa: add Arrow SpeedChips XRS700x driver") Link: https://lore.kernel.org/netdev/20210909095324.12978-1-LinoSanfilippo@gmx.de/ Reported-by: Lino Sanfilippo <LinoSanfilippo@gmx.de> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: George McCollister <george.mccollister@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-17 16:34:36 +03:00
net: dsa: add Arrow SpeedChips XRS700x driver Add a driver with initial support for the Arrow SpeedChips XRS7000 series of gigabit Ethernet switch chips which are typically used in critical networking applications. The switches have up to three RGMII ports and one RMII port. Management to the switches can be performed over i2c or mdio. Support for advanced features such as PTP and HSR/PRP (IEC 62439-3 Clause 5 & 4) is not included in this patch and may be added at a later date. Signed-off-by: George McCollister <george.mccollister@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-14 13:57:33 -06:00
xrs700x_switch_remove(priv);
}
net: dsa: xrs700x: be compatible with masters which unregister on shutdown Since commit 2f1e8ea726e9 ("net: dsa: link interfaces with the DSA master to get rid of lockdep warnings"), DSA gained a requirement which it did not fulfill, which is to unlink itself from the DSA master at shutdown time. Since the Arrow SpeedChips XRS700x driver was introduced after the bad commit, it has never worked with DSA masters which decide to unregister their net_device on shutdown, effectively hanging the reboot process. To fix that, we need to call dsa_switch_shutdown. These devices can be connected by I2C or by MDIO, and if I search for I2C or MDIO bus drivers that implement their ->shutdown by redirecting it to ->remove I don't see any, however this does not mean it would not be possible. To be compatible with that pattern, it is necessary to implement an "if this then not that" scheme, to avoid ->remove and ->shutdown from being called both for the same struct device. Fixes: ee00b24f32eb ("net: dsa: add Arrow SpeedChips XRS700x driver") Link: https://lore.kernel.org/netdev/20210909095324.12978-1-LinoSanfilippo@gmx.de/ Reported-by: Lino Sanfilippo <LinoSanfilippo@gmx.de> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: George McCollister <george.mccollister@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-17 16:34:36 +03:00
static void xrs700x_i2c_shutdown(struct i2c_client *i2c)
{
struct xrs700x *priv = i2c_get_clientdata(i2c);
if (!priv)
return;
xrs700x_switch_shutdown(priv);
i2c_set_clientdata(i2c, NULL);
}
net: dsa: add Arrow SpeedChips XRS700x driver Add a driver with initial support for the Arrow SpeedChips XRS7000 series of gigabit Ethernet switch chips which are typically used in critical networking applications. The switches have up to three RGMII ports and one RMII port. Management to the switches can be performed over i2c or mdio. Support for advanced features such as PTP and HSR/PRP (IEC 62439-3 Clause 5 & 4) is not included in this patch and may be added at a later date. Signed-off-by: George McCollister <george.mccollister@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-14 13:57:33 -06:00
static const struct i2c_device_id xrs700x_i2c_id[] = {
net: Drop explicit initialization of struct i2c_device_id::driver_data to 0 These drivers don't use the driver_data member of struct i2c_device_id, so don't explicitly initialize this member. This prepares putting driver_data in an anonymous union which requires either no initialization or named designators. But it's also a nice cleanup on its own. While add it, also remove commas after the sentinel entries. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com> Reviewed-by: Petr Machata <petrm@nvidia.com> # For mlxsw Reviewed-by: Kory Maincent <Kory.maincent@bootlin.com> Reviewed-by: Jeremy Kerr <jk@codeconstruct.com.au> # for mctp-i2c Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de> Acked-by: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://patch.msgid.link/20240625083853.2205977-2-u.kleine-koenig@baylibre.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-06-25 10:38:53 +02:00
{ "xrs700x-switch" },
{}
net: dsa: add Arrow SpeedChips XRS700x driver Add a driver with initial support for the Arrow SpeedChips XRS7000 series of gigabit Ethernet switch chips which are typically used in critical networking applications. The switches have up to three RGMII ports and one RMII port. Management to the switches can be performed over i2c or mdio. Support for advanced features such as PTP and HSR/PRP (IEC 62439-3 Clause 5 & 4) is not included in this patch and may be added at a later date. Signed-off-by: George McCollister <george.mccollister@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-14 13:57:33 -06:00
};
MODULE_DEVICE_TABLE(i2c, xrs700x_i2c_id);
net: dsa: xrs700x: fix unused warning for of_device_id Fix unused variable warning that occurs when CONFIG_OF isn't defined by adding __maybe_unused. >> drivers/net/dsa/xrs700x/xrs700x_i2c.c:127:34: warning: unused variable 'xrs700x_i2c_dt_ids' [-Wunused-const-variable] static const struct of_device_id xrs700x_i2c_dt_ids[] = { Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: George McCollister <george.mccollister@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-09 15:12:55 -06:00
static const struct of_device_id __maybe_unused xrs700x_i2c_dt_ids[] = {
net: dsa: add Arrow SpeedChips XRS700x driver Add a driver with initial support for the Arrow SpeedChips XRS7000 series of gigabit Ethernet switch chips which are typically used in critical networking applications. The switches have up to three RGMII ports and one RMII port. Management to the switches can be performed over i2c or mdio. Support for advanced features such as PTP and HSR/PRP (IEC 62439-3 Clause 5 & 4) is not included in this patch and may be added at a later date. Signed-off-by: George McCollister <george.mccollister@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-14 13:57:33 -06:00
{ .compatible = "arrow,xrs7003e", .data = &xrs7003e_info },
{ .compatible = "arrow,xrs7003f", .data = &xrs7003f_info },
{ .compatible = "arrow,xrs7004e", .data = &xrs7004e_info },
{ .compatible = "arrow,xrs7004f", .data = &xrs7004f_info },
{},
};
MODULE_DEVICE_TABLE(of, xrs700x_i2c_dt_ids);
static struct i2c_driver xrs700x_i2c_driver = {
.driver = {
.name = "xrs700x-i2c",
.of_match_table = of_match_ptr(xrs700x_i2c_dt_ids),
},
net: dsa: Switch i2c drivers back to use .probe() After commit b8a1a4cd5a98 ("i2c: Provide a temporary .probe_new() call-back type"), all drivers being converted to .probe_new() and then 03c835f498b5 ("i2c: Switch .probe() to not take an id parameter") convert back to (the new) .probe() to be able to eventually drop .probe_new() from struct i2c_driver. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-05-30 08:39:36 +02:00
.probe = xrs700x_i2c_probe,
net: dsa: add Arrow SpeedChips XRS700x driver Add a driver with initial support for the Arrow SpeedChips XRS7000 series of gigabit Ethernet switch chips which are typically used in critical networking applications. The switches have up to three RGMII ports and one RMII port. Management to the switches can be performed over i2c or mdio. Support for advanced features such as PTP and HSR/PRP (IEC 62439-3 Clause 5 & 4) is not included in this patch and may be added at a later date. Signed-off-by: George McCollister <george.mccollister@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-14 13:57:33 -06:00
.remove = xrs700x_i2c_remove,
net: dsa: xrs700x: be compatible with masters which unregister on shutdown Since commit 2f1e8ea726e9 ("net: dsa: link interfaces with the DSA master to get rid of lockdep warnings"), DSA gained a requirement which it did not fulfill, which is to unlink itself from the DSA master at shutdown time. Since the Arrow SpeedChips XRS700x driver was introduced after the bad commit, it has never worked with DSA masters which decide to unregister their net_device on shutdown, effectively hanging the reboot process. To fix that, we need to call dsa_switch_shutdown. These devices can be connected by I2C or by MDIO, and if I search for I2C or MDIO bus drivers that implement their ->shutdown by redirecting it to ->remove I don't see any, however this does not mean it would not be possible. To be compatible with that pattern, it is necessary to implement an "if this then not that" scheme, to avoid ->remove and ->shutdown from being called both for the same struct device. Fixes: ee00b24f32eb ("net: dsa: add Arrow SpeedChips XRS700x driver") Link: https://lore.kernel.org/netdev/20210909095324.12978-1-LinoSanfilippo@gmx.de/ Reported-by: Lino Sanfilippo <LinoSanfilippo@gmx.de> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: George McCollister <george.mccollister@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-17 16:34:36 +03:00
.shutdown = xrs700x_i2c_shutdown,
net: dsa: add Arrow SpeedChips XRS700x driver Add a driver with initial support for the Arrow SpeedChips XRS7000 series of gigabit Ethernet switch chips which are typically used in critical networking applications. The switches have up to three RGMII ports and one RMII port. Management to the switches can be performed over i2c or mdio. Support for advanced features such as PTP and HSR/PRP (IEC 62439-3 Clause 5 & 4) is not included in this patch and may be added at a later date. Signed-off-by: George McCollister <george.mccollister@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-14 13:57:33 -06:00
.id_table = xrs700x_i2c_id,
};
module_i2c_driver(xrs700x_i2c_driver);
MODULE_AUTHOR("George McCollister <george.mccollister@gmail.com>");
MODULE_DESCRIPTION("Arrow SpeedChips XRS700x DSA I2C driver");
MODULE_LICENSE("GPL v2");
Reference in a new issue Copy permalink