linux/drivers/net/dsa/mv88e6xxx/phy.c

282 lines
6.4 KiB
C
Raw Permalink Normal View History

// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Marvell 88e6xxx Ethernet switch PHY and PPU support
*
* Copyright (c) 2008 Marvell Semiconductor
*
* Copyright (c) 2017 Andrew Lunn <andrew@lunn.ch>
*/
#include <linux/mdio.h>
#include <linux/module.h>
#include "chip.h"
#include "phy.h"
int mv88e6165_phy_read(struct mv88e6xxx_chip *chip, struct mii_bus *bus,
int addr, int reg, u16 *val)
{
return mv88e6xxx_read(chip, addr, reg, val);
}
int mv88e6165_phy_write(struct mv88e6xxx_chip *chip, struct mii_bus *bus,
int addr, int reg, u16 val)
{
return mv88e6xxx_write(chip, addr, reg, val);
}
int mv88e6xxx_phy_read(struct mv88e6xxx_chip *chip, int phy, int reg, u16 *val)
{
int addr = phy; /* PHY devices addresses start at 0x0 */
struct mii_bus *bus;
bus = mv88e6xxx_default_mdio_bus(chip);
if (!bus)
return -EOPNOTSUPP;
if (!chip->info->ops->phy_read)
return -EOPNOTSUPP;
return chip->info->ops->phy_read(chip, bus, addr, reg, val);
}
int mv88e6xxx_phy_write(struct mv88e6xxx_chip *chip, int phy, int reg, u16 val)
{
int addr = phy; /* PHY devices addresses start at 0x0 */
struct mii_bus *bus;
bus = mv88e6xxx_default_mdio_bus(chip);
if (!bus)
return -EOPNOTSUPP;
if (!chip->info->ops->phy_write)
return -EOPNOTSUPP;
return chip->info->ops->phy_write(chip, bus, addr, reg, val);
}
int mv88e6xxx_phy_read_c45(struct mv88e6xxx_chip *chip, int phy, int devad,
int reg, u16 *val)
{
int addr = phy; /* PHY devices addresses start at 0x0 */
struct mii_bus *bus;
bus = mv88e6xxx_default_mdio_bus(chip);
if (!bus)
return -EOPNOTSUPP;
if (!chip->info->ops->phy_read_c45)
return -EOPNOTSUPP;
return chip->info->ops->phy_read_c45(chip, bus, addr, devad, reg, val);
}
int mv88e6xxx_phy_write_c45(struct mv88e6xxx_chip *chip, int phy, int devad,
int reg, u16 val)
{
int addr = phy; /* PHY devices addresses start at 0x0 */
struct mii_bus *bus;
bus = mv88e6xxx_default_mdio_bus(chip);
if (!bus)
return -EOPNOTSUPP;
if (!chip->info->ops->phy_write_c45)
return -EOPNOTSUPP;
return chip->info->ops->phy_write_c45(chip, bus, addr, devad, reg, val);
}
static int mv88e6xxx_phy_page_get(struct mv88e6xxx_chip *chip, int phy, u8 page)
{
return mv88e6xxx_phy_write(chip, phy, MV88E6XXX_PHY_PAGE, page);
}
static void mv88e6xxx_phy_page_put(struct mv88e6xxx_chip *chip, int phy)
{
int err;
/* Restore PHY page Copper 0x0 for access via the registered
* MDIO bus
*/
err = mv88e6xxx_phy_write(chip, phy, MV88E6XXX_PHY_PAGE,
MV88E6XXX_PHY_PAGE_COPPER);
if (unlikely(err)) {
dev_err(chip->dev,
"failed to restore PHY %d page Copper (%d)\n",
phy, err);
}
}
int mv88e6xxx_phy_page_read(struct mv88e6xxx_chip *chip, int phy,
u8 page, int reg, u16 *val)
{
int err;
/* There is no paging for registers 22 */
if (reg == MV88E6XXX_PHY_PAGE)
return -EINVAL;
err = mv88e6xxx_phy_page_get(chip, phy, page);
if (!err) {
err = mv88e6xxx_phy_read(chip, phy, reg, val);
mv88e6xxx_phy_page_put(chip, phy);
}
return err;
}
int mv88e6xxx_phy_page_write(struct mv88e6xxx_chip *chip, int phy,
u8 page, int reg, u16 val)
{
int err;
/* There is no paging for registers 22 */
if (reg == MV88E6XXX_PHY_PAGE)
return -EINVAL;
err = mv88e6xxx_phy_page_get(chip, phy, page);
if (!err) {
err = mv88e6xxx_phy_write(chip, phy, MV88E6XXX_PHY_PAGE, page);
if (!err)
err = mv88e6xxx_phy_write(chip, phy, reg, val);
mv88e6xxx_phy_page_put(chip, phy);
}
return err;
}
static int mv88e6xxx_phy_ppu_disable(struct mv88e6xxx_chip *chip)
{
if (!chip->info->ops->ppu_disable)
return 0;
return chip->info->ops->ppu_disable(chip);
}
static int mv88e6xxx_phy_ppu_enable(struct mv88e6xxx_chip *chip)
{
if (!chip->info->ops->ppu_enable)
return 0;
return chip->info->ops->ppu_enable(chip);
}
static void mv88e6xxx_phy_ppu_reenable_work(struct work_struct *ugly)
{
struct mv88e6xxx_chip *chip;
chip = container_of(ugly, struct mv88e6xxx_chip, ppu_work);
mv88e6xxx_reg_lock(chip);
if (mutex_trylock(&chip->ppu_mutex)) {
if (mv88e6xxx_phy_ppu_enable(chip) == 0)
chip->ppu_disabled = 0;
mutex_unlock(&chip->ppu_mutex);
}
mv88e6xxx_reg_unlock(chip);
}
treewide: setup_timer() -> timer_setup() This converts all remaining cases of the old setup_timer() API into using timer_setup(), where the callback argument is the structure already holding the struct timer_list. These should have no behavioral changes, since they just change which pointer is passed into the callback with the same available pointers after conversion. It handles the following examples, in addition to some other variations. Casting from unsigned long: void my_callback(unsigned long data) { struct something *ptr = (struct something *)data; ... } ... setup_timer(&ptr->my_timer, my_callback, ptr); and forced object casts: void my_callback(struct something *ptr) { ... } ... setup_timer(&ptr->my_timer, my_callback, (unsigned long)ptr); become: void my_callback(struct timer_list *t) { struct something *ptr = from_timer(ptr, t, my_timer); ... } ... timer_setup(&ptr->my_timer, my_callback, 0); Direct function assignments: void my_callback(unsigned long data) { struct something *ptr = (struct something *)data; ... } ... ptr->my_timer.function = my_callback; have a temporary cast added, along with converting the args: void my_callback(struct timer_list *t) { struct something *ptr = from_timer(ptr, t, my_timer); ... } ... ptr->my_timer.function = (TIMER_FUNC_TYPE)my_callback; And finally, callbacks without a data assignment: void my_callback(unsigned long data) { ... } ... setup_timer(&ptr->my_timer, my_callback, 0); have their argument renamed to verify they're unused during conversion: void my_callback(struct timer_list *unused) { ... } ... timer_setup(&ptr->my_timer, my_callback, 0); The conversion is done with the following Coccinelle script: spatch --very-quiet --all-includes --include-headers \ -I ./arch/x86/include -I ./arch/x86/include/generated \ -I ./include -I ./arch/x86/include/uapi \ -I ./arch/x86/include/generated/uapi -I ./include/uapi \ -I ./include/generated/uapi --include ./include/linux/kconfig.h \ --dir . \ --cocci-file ~/src/data/timer_setup.cocci @fix_address_of@ expression e; @@ setup_timer( -&(e) +&e , ...) // Update any raw setup_timer() usages that have a NULL callback, but // would otherwise match change_timer_function_usage, since the latter // will update all function assignments done in the face of a NULL // function initialization in setup_timer(). @change_timer_function_usage_NULL@ expression _E; identifier _timer; type _cast_data; @@ ( -setup_timer(&_E->_timer, NULL, _E); +timer_setup(&_E->_timer, NULL, 0); | -setup_timer(&_E->_timer, NULL, (_cast_data)_E); +timer_setup(&_E->_timer, NULL, 0); | -setup_timer(&_E._timer, NULL, &_E); +timer_setup(&_E._timer, NULL, 0); | -setup_timer(&_E._timer, NULL, (_cast_data)&_E); +timer_setup(&_E._timer, NULL, 0); ) @change_timer_function_usage@ expression _E; identifier _timer; struct timer_list _stl; identifier _callback; type _cast_func, _cast_data; @@ ( -setup_timer(&_E->_timer, _callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, &_callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, _callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, &_callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)_callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)&_callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)_callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)&_callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E._timer, _callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, _callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, &_callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, &_callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)_callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)_callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)&_callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)&_callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | _E->_timer@_stl.function = _callback; | _E->_timer@_stl.function = &_callback; | _E->_timer@_stl.function = (_cast_func)_callback; | _E->_timer@_stl.function = (_cast_func)&_callback; | _E._timer@_stl.function = _callback; | _E._timer@_stl.function = &_callback; | _E._timer@_stl.function = (_cast_func)_callback; | _E._timer@_stl.function = (_cast_func)&_callback; ) // callback(unsigned long arg) @change_callback_handle_cast depends on change_timer_function_usage@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _origtype; identifier _origarg; type _handletype; identifier _handle; @@ void _callback( -_origtype _origarg +struct timer_list *t ) { ( ... when != _origarg _handletype *_handle = -(_handletype *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg | ... when != _origarg _handletype *_handle = -(void *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg | ... when != _origarg _handletype *_handle; ... when != _handle _handle = -(_handletype *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg | ... when != _origarg _handletype *_handle; ... when != _handle _handle = -(void *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg ) } // callback(unsigned long arg) without existing variable @change_callback_handle_cast_no_arg depends on change_timer_function_usage && !change_callback_handle_cast@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _origtype; identifier _origarg; type _handletype; @@ void _callback( -_origtype _origarg +struct timer_list *t ) { + _handletype *_origarg = from_timer(_origarg, t, _timer); + ... when != _origarg - (_handletype *)_origarg + _origarg ... when != _origarg } // Avoid already converted callbacks. @match_callback_converted depends on change_timer_function_usage && !change_callback_handle_cast && !change_callback_handle_cast_no_arg@ identifier change_timer_function_usage._callback; identifier t; @@ void _callback(struct timer_list *t) { ... } // callback(struct something *handle) @change_callback_handle_arg depends on change_timer_function_usage && !match_callback_converted && !change_callback_handle_cast && !change_callback_handle_cast_no_arg@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _handletype; identifier _handle; @@ void _callback( -_handletype *_handle +struct timer_list *t ) { + _handletype *_handle = from_timer(_handle, t, _timer); ... } // If change_callback_handle_arg ran on an empty function, remove // the added handler. @unchange_callback_handle_arg depends on change_timer_function_usage && change_callback_handle_arg@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _handletype; identifier _handle; identifier t; @@ void _callback(struct timer_list *t) { - _handletype *_handle = from_timer(_handle, t, _timer); } // We only want to refactor the setup_timer() data argument if we've found // the matching callback. This undoes changes in change_timer_function_usage. @unchange_timer_function_usage depends on change_timer_function_usage && !change_callback_handle_cast && !change_callback_handle_cast_no_arg && !change_callback_handle_arg@ expression change_timer_function_usage._E; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type change_timer_function_usage._cast_data; @@ ( -timer_setup(&_E->_timer, _callback, 0); +setup_timer(&_E->_timer, _callback, (_cast_data)_E); | -timer_setup(&_E._timer, _callback, 0); +setup_timer(&_E._timer, _callback, (_cast_data)&_E); ) // If we fixed a callback from a .function assignment, fix the // assignment cast now. @change_timer_function_assignment depends on change_timer_function_usage && (change_callback_handle_cast || change_callback_handle_cast_no_arg || change_callback_handle_arg)@ expression change_timer_function_usage._E; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type _cast_func; typedef TIMER_FUNC_TYPE; @@ ( _E->_timer.function = -_callback +(TIMER_FUNC_TYPE)_callback ; | _E->_timer.function = -&_callback +(TIMER_FUNC_TYPE)_callback ; | _E->_timer.function = -(_cast_func)_callback; +(TIMER_FUNC_TYPE)_callback ; | _E->_timer.function = -(_cast_func)&_callback +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -_callback +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -&_callback; +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -(_cast_func)_callback +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -(_cast_func)&_callback +(TIMER_FUNC_TYPE)_callback ; ) // Sometimes timer functions are called directly. Replace matched args. @change_timer_function_calls depends on change_timer_function_usage && (change_callback_handle_cast || change_callback_handle_cast_no_arg || change_callback_handle_arg)@ expression _E; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type _cast_data; @@ _callback( ( -(_cast_data)_E +&_E->_timer | -(_cast_data)&_E +&_E._timer | -_E +&_E->_timer ) ) // If a timer has been configured without a data argument, it can be // converted without regard to the callback argument, since it is unused. @match_timer_function_unused_data@ expression _E; identifier _timer; identifier _callback; @@ ( -setup_timer(&_E->_timer, _callback, 0); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, _callback, 0L); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, _callback, 0UL); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E._timer, _callback, 0); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, _callback, 0L); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, _callback, 0UL); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_timer, _callback, 0); +timer_setup(&_timer, _callback, 0); | -setup_timer(&_timer, _callback, 0L); +timer_setup(&_timer, _callback, 0); | -setup_timer(&_timer, _callback, 0UL); +timer_setup(&_timer, _callback, 0); | -setup_timer(_timer, _callback, 0); +timer_setup(_timer, _callback, 0); | -setup_timer(_timer, _callback, 0L); +timer_setup(_timer, _callback, 0); | -setup_timer(_timer, _callback, 0UL); +timer_setup(_timer, _callback, 0); ) @change_callback_unused_data depends on match_timer_function_unused_data@ identifier match_timer_function_unused_data._callback; type _origtype; identifier _origarg; @@ void _callback( -_origtype _origarg +struct timer_list *unused ) { ... when != _origarg } Signed-off-by: Kees Cook <keescook@chromium.org>
2017-10-16 14:43:17 -07:00
static void mv88e6xxx_phy_ppu_reenable_timer(struct timer_list *t)
{
struct mv88e6xxx_chip *chip = timer_container_of(chip, t, ppu_timer);
schedule_work(&chip->ppu_work);
}
static int mv88e6xxx_phy_ppu_access_get(struct mv88e6xxx_chip *chip)
{
int ret;
mutex_lock(&chip->ppu_mutex);
/* If the PHY polling unit is enabled, disable it so that
* we can access the PHY registers. If it was already
* disabled, cancel the timer that is going to re-enable
* it.
*/
if (!chip->ppu_disabled) {
ret = mv88e6xxx_phy_ppu_disable(chip);
if (ret < 0) {
mutex_unlock(&chip->ppu_mutex);
return ret;
}
chip->ppu_disabled = 1;
} else {
timer_delete(&chip->ppu_timer);
ret = 0;
}
return ret;
}
static void mv88e6xxx_phy_ppu_access_put(struct mv88e6xxx_chip *chip)
{
/* Schedule a timer to re-enable the PHY polling unit. */
mod_timer(&chip->ppu_timer, jiffies + msecs_to_jiffies(10));
mutex_unlock(&chip->ppu_mutex);
}
static void mv88e6xxx_phy_ppu_state_init(struct mv88e6xxx_chip *chip)
{
mutex_init(&chip->ppu_mutex);
INIT_WORK(&chip->ppu_work, mv88e6xxx_phy_ppu_reenable_work);
treewide: setup_timer() -> timer_setup() This converts all remaining cases of the old setup_timer() API into using timer_setup(), where the callback argument is the structure already holding the struct timer_list. These should have no behavioral changes, since they just change which pointer is passed into the callback with the same available pointers after conversion. It handles the following examples, in addition to some other variations. Casting from unsigned long: void my_callback(unsigned long data) { struct something *ptr = (struct something *)data; ... } ... setup_timer(&ptr->my_timer, my_callback, ptr); and forced object casts: void my_callback(struct something *ptr) { ... } ... setup_timer(&ptr->my_timer, my_callback, (unsigned long)ptr); become: void my_callback(struct timer_list *t) { struct something *ptr = from_timer(ptr, t, my_timer); ... } ... timer_setup(&ptr->my_timer, my_callback, 0); Direct function assignments: void my_callback(unsigned long data) { struct something *ptr = (struct something *)data; ... } ... ptr->my_timer.function = my_callback; have a temporary cast added, along with converting the args: void my_callback(struct timer_list *t) { struct something *ptr = from_timer(ptr, t, my_timer); ... } ... ptr->my_timer.function = (TIMER_FUNC_TYPE)my_callback; And finally, callbacks without a data assignment: void my_callback(unsigned long data) { ... } ... setup_timer(&ptr->my_timer, my_callback, 0); have their argument renamed to verify they're unused during conversion: void my_callback(struct timer_list *unused) { ... } ... timer_setup(&ptr->my_timer, my_callback, 0); The conversion is done with the following Coccinelle script: spatch --very-quiet --all-includes --include-headers \ -I ./arch/x86/include -I ./arch/x86/include/generated \ -I ./include -I ./arch/x86/include/uapi \ -I ./arch/x86/include/generated/uapi -I ./include/uapi \ -I ./include/generated/uapi --include ./include/linux/kconfig.h \ --dir . \ --cocci-file ~/src/data/timer_setup.cocci @fix_address_of@ expression e; @@ setup_timer( -&(e) +&e , ...) // Update any raw setup_timer() usages that have a NULL callback, but // would otherwise match change_timer_function_usage, since the latter // will update all function assignments done in the face of a NULL // function initialization in setup_timer(). @change_timer_function_usage_NULL@ expression _E; identifier _timer; type _cast_data; @@ ( -setup_timer(&_E->_timer, NULL, _E); +timer_setup(&_E->_timer, NULL, 0); | -setup_timer(&_E->_timer, NULL, (_cast_data)_E); +timer_setup(&_E->_timer, NULL, 0); | -setup_timer(&_E._timer, NULL, &_E); +timer_setup(&_E._timer, NULL, 0); | -setup_timer(&_E._timer, NULL, (_cast_data)&_E); +timer_setup(&_E._timer, NULL, 0); ) @change_timer_function_usage@ expression _E; identifier _timer; struct timer_list _stl; identifier _callback; type _cast_func, _cast_data; @@ ( -setup_timer(&_E->_timer, _callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, &_callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, _callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, &_callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)_callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)&_callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)_callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)&_callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E._timer, _callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, _callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, &_callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, &_callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)_callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)_callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)&_callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)&_callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | _E->_timer@_stl.function = _callback; | _E->_timer@_stl.function = &_callback; | _E->_timer@_stl.function = (_cast_func)_callback; | _E->_timer@_stl.function = (_cast_func)&_callback; | _E._timer@_stl.function = _callback; | _E._timer@_stl.function = &_callback; | _E._timer@_stl.function = (_cast_func)_callback; | _E._timer@_stl.function = (_cast_func)&_callback; ) // callback(unsigned long arg) @change_callback_handle_cast depends on change_timer_function_usage@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _origtype; identifier _origarg; type _handletype; identifier _handle; @@ void _callback( -_origtype _origarg +struct timer_list *t ) { ( ... when != _origarg _handletype *_handle = -(_handletype *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg | ... when != _origarg _handletype *_handle = -(void *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg | ... when != _origarg _handletype *_handle; ... when != _handle _handle = -(_handletype *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg | ... when != _origarg _handletype *_handle; ... when != _handle _handle = -(void *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg ) } // callback(unsigned long arg) without existing variable @change_callback_handle_cast_no_arg depends on change_timer_function_usage && !change_callback_handle_cast@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _origtype; identifier _origarg; type _handletype; @@ void _callback( -_origtype _origarg +struct timer_list *t ) { + _handletype *_origarg = from_timer(_origarg, t, _timer); + ... when != _origarg - (_handletype *)_origarg + _origarg ... when != _origarg } // Avoid already converted callbacks. @match_callback_converted depends on change_timer_function_usage && !change_callback_handle_cast && !change_callback_handle_cast_no_arg@ identifier change_timer_function_usage._callback; identifier t; @@ void _callback(struct timer_list *t) { ... } // callback(struct something *handle) @change_callback_handle_arg depends on change_timer_function_usage && !match_callback_converted && !change_callback_handle_cast && !change_callback_handle_cast_no_arg@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _handletype; identifier _handle; @@ void _callback( -_handletype *_handle +struct timer_list *t ) { + _handletype *_handle = from_timer(_handle, t, _timer); ... } // If change_callback_handle_arg ran on an empty function, remove // the added handler. @unchange_callback_handle_arg depends on change_timer_function_usage && change_callback_handle_arg@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _handletype; identifier _handle; identifier t; @@ void _callback(struct timer_list *t) { - _handletype *_handle = from_timer(_handle, t, _timer); } // We only want to refactor the setup_timer() data argument if we've found // the matching callback. This undoes changes in change_timer_function_usage. @unchange_timer_function_usage depends on change_timer_function_usage && !change_callback_handle_cast && !change_callback_handle_cast_no_arg && !change_callback_handle_arg@ expression change_timer_function_usage._E; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type change_timer_function_usage._cast_data; @@ ( -timer_setup(&_E->_timer, _callback, 0); +setup_timer(&_E->_timer, _callback, (_cast_data)_E); | -timer_setup(&_E._timer, _callback, 0); +setup_timer(&_E._timer, _callback, (_cast_data)&_E); ) // If we fixed a callback from a .function assignment, fix the // assignment cast now. @change_timer_function_assignment depends on change_timer_function_usage && (change_callback_handle_cast || change_callback_handle_cast_no_arg || change_callback_handle_arg)@ expression change_timer_function_usage._E; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type _cast_func; typedef TIMER_FUNC_TYPE; @@ ( _E->_timer.function = -_callback +(TIMER_FUNC_TYPE)_callback ; | _E->_timer.function = -&_callback +(TIMER_FUNC_TYPE)_callback ; | _E->_timer.function = -(_cast_func)_callback; +(TIMER_FUNC_TYPE)_callback ; | _E->_timer.function = -(_cast_func)&_callback +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -_callback +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -&_callback; +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -(_cast_func)_callback +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -(_cast_func)&_callback +(TIMER_FUNC_TYPE)_callback ; ) // Sometimes timer functions are called directly. Replace matched args. @change_timer_function_calls depends on change_timer_function_usage && (change_callback_handle_cast || change_callback_handle_cast_no_arg || change_callback_handle_arg)@ expression _E; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type _cast_data; @@ _callback( ( -(_cast_data)_E +&_E->_timer | -(_cast_data)&_E +&_E._timer | -_E +&_E->_timer ) ) // If a timer has been configured without a data argument, it can be // converted without regard to the callback argument, since it is unused. @match_timer_function_unused_data@ expression _E; identifier _timer; identifier _callback; @@ ( -setup_timer(&_E->_timer, _callback, 0); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, _callback, 0L); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, _callback, 0UL); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E._timer, _callback, 0); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, _callback, 0L); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, _callback, 0UL); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_timer, _callback, 0); +timer_setup(&_timer, _callback, 0); | -setup_timer(&_timer, _callback, 0L); +timer_setup(&_timer, _callback, 0); | -setup_timer(&_timer, _callback, 0UL); +timer_setup(&_timer, _callback, 0); | -setup_timer(_timer, _callback, 0); +timer_setup(_timer, _callback, 0); | -setup_timer(_timer, _callback, 0L); +timer_setup(_timer, _callback, 0); | -setup_timer(_timer, _callback, 0UL); +timer_setup(_timer, _callback, 0); ) @change_callback_unused_data depends on match_timer_function_unused_data@ identifier match_timer_function_unused_data._callback; type _origtype; identifier _origarg; @@ void _callback( -_origtype _origarg +struct timer_list *unused ) { ... when != _origarg } Signed-off-by: Kees Cook <keescook@chromium.org>
2017-10-16 14:43:17 -07:00
timer_setup(&chip->ppu_timer, mv88e6xxx_phy_ppu_reenable_timer, 0);
}
static void mv88e6xxx_phy_ppu_state_destroy(struct mv88e6xxx_chip *chip)
{
net: dsa: mv88e6xxx: propperly shutdown PPU re-enable timer on destroy The mv88e6xxx has an internal PPU that polls PHY state. If we want to access the internal PHYs, we need to disable the PPU first. Because that is a slow operation, a 10ms timer is used to re-enable it, canceled with every access, so bulk operations effectively only disable it once and re-enable it some 10ms after the last access. If a PHY is accessed and then the mv88e6xxx module is removed before the 10ms are up, the PPU re-enable ends up accessing a dangling pointer. This especially affects probing during bootup. The MDIO bus and PHY registration may succeed, but registration with the DSA framework may fail later on (e.g. because the CPU port depends on another, very slow device that isn't done probing yet, returning -EPROBE_DEFER). In this case, probe() fails, but the MDIO subsystem may already have accessed the MIDO bus or PHYs, arming the timer. This is fixed as follows: - If probe fails after mv88e6xxx_phy_init(), make sure we also call mv88e6xxx_phy_destroy() before returning - In mv88e6xxx_remove(), make sure we do the teardown in the correct order, calling mv88e6xxx_phy_destroy() after unregistering the switch device. - In mv88e6xxx_phy_destroy(), destroy both the timer and the work item that the timer might schedule, synchronously waiting in case one of the callbacks already fired and destroying the timer first, before waiting for the work item. - Access to the PPU is guarded by a mutex, the worker acquires it with a mutex_trylock(), not proceeding with the expensive shutdown if that fails. We grab the mutex in mv88e6xxx_phy_destroy() to make sure the slow PPU shutdown is already done or won't even enter, when we wait for the work item. Fixes: 2e5f032095ff ("dsa: add support for the Marvell 88E6131 switch chip") Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Link: https://patch.msgid.link/20250401135705.92760-1-david.oberhollenzer@sigma-star.at Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-01 15:56:37 +02:00
mutex_lock(&chip->ppu_mutex);
timer_delete_sync(&chip->ppu_timer);
net: dsa: mv88e6xxx: propperly shutdown PPU re-enable timer on destroy The mv88e6xxx has an internal PPU that polls PHY state. If we want to access the internal PHYs, we need to disable the PPU first. Because that is a slow operation, a 10ms timer is used to re-enable it, canceled with every access, so bulk operations effectively only disable it once and re-enable it some 10ms after the last access. If a PHY is accessed and then the mv88e6xxx module is removed before the 10ms are up, the PPU re-enable ends up accessing a dangling pointer. This especially affects probing during bootup. The MDIO bus and PHY registration may succeed, but registration with the DSA framework may fail later on (e.g. because the CPU port depends on another, very slow device that isn't done probing yet, returning -EPROBE_DEFER). In this case, probe() fails, but the MDIO subsystem may already have accessed the MIDO bus or PHYs, arming the timer. This is fixed as follows: - If probe fails after mv88e6xxx_phy_init(), make sure we also call mv88e6xxx_phy_destroy() before returning - In mv88e6xxx_remove(), make sure we do the teardown in the correct order, calling mv88e6xxx_phy_destroy() after unregistering the switch device. - In mv88e6xxx_phy_destroy(), destroy both the timer and the work item that the timer might schedule, synchronously waiting in case one of the callbacks already fired and destroying the timer first, before waiting for the work item. - Access to the PPU is guarded by a mutex, the worker acquires it with a mutex_trylock(), not proceeding with the expensive shutdown if that fails. We grab the mutex in mv88e6xxx_phy_destroy() to make sure the slow PPU shutdown is already done or won't even enter, when we wait for the work item. Fixes: 2e5f032095ff ("dsa: add support for the Marvell 88E6131 switch chip") Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Link: https://patch.msgid.link/20250401135705.92760-1-david.oberhollenzer@sigma-star.at Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-01 15:56:37 +02:00
cancel_work_sync(&chip->ppu_work);
mutex_unlock(&chip->ppu_mutex);
}
int mv88e6185_phy_ppu_read(struct mv88e6xxx_chip *chip, struct mii_bus *bus,
int addr, int reg, u16 *val)
{
int err;
err = mv88e6xxx_phy_ppu_access_get(chip);
if (!err) {
err = mv88e6xxx_read(chip, addr, reg, val);
mv88e6xxx_phy_ppu_access_put(chip);
}
return err;
}
int mv88e6185_phy_ppu_write(struct mv88e6xxx_chip *chip, struct mii_bus *bus,
int addr, int reg, u16 val)
{
int err;
err = mv88e6xxx_phy_ppu_access_get(chip);
if (!err) {
err = mv88e6xxx_write(chip, addr, reg, val);
mv88e6xxx_phy_ppu_access_put(chip);
}
return err;
}
void mv88e6xxx_phy_init(struct mv88e6xxx_chip *chip)
{
if (chip->info->ops->ppu_enable && chip->info->ops->ppu_disable)
mv88e6xxx_phy_ppu_state_init(chip);
}
void mv88e6xxx_phy_destroy(struct mv88e6xxx_chip *chip)
{
if (chip->info->ops->ppu_enable && chip->info->ops->ppu_disable)
mv88e6xxx_phy_ppu_state_destroy(chip);
}
int mv88e6xxx_phy_setup(struct mv88e6xxx_chip *chip)
{
return mv88e6xxx_phy_ppu_enable(chip);
}