linux/drivers/infiniband/sw/rxe/rxe_task.c

296 lines
7.2 KiB
C
Raw Permalink Normal View History

// SPDX-License-Identifier: GPL-2.0 OR Linux-OpenIB
Soft RoCE driver Soft RoCE (RXE) - The software RoCE driver ib_rxe implements the RDMA transport and registers to the RDMA core device as a kernel verbs provider. It also implements the packet IO layer. On the other hand ib_rxe registers to the Linux netdev stack as a udp encapsulating protocol, in that case RDMA, for sending and receiving packets over any Ethernet device. This yields a RDMA transport over the UDP/Ethernet network layer forming a RoCEv2 compatible device. The configuration procedure of the Soft RoCE drivers requires binding to any existing Ethernet network device. This is done with /sys interface. A userspace Soft RoCE library (librxe) provides user applications the ability to run with Soft RoCE devices. The use of rxe verbs ins user space requires the inclusion of librxe as a device specifics plug-in to libibverbs. librxe is packaged separately. Architecture: +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ +---------------------------------------------------------------+ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Soft RoCE resources: [1[ https://github.com/SoftRoCE/librxe-dev librxe - source code in Github [2] https://github.com/SoftRoCE/rxe-dev/wiki/rxe-dev:-Home - Soft RoCE Wiki page [3] https://github.com/SoftRoCE/librxe-dev - Soft RoCE userspace library Signed-off-by: Kamal Heib <kamalh@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Reviewed-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-16 16:45:23 +03:00
/*
* Copyright (c) 2016 Mellanox Technologies Ltd. All rights reserved.
* Copyright (c) 2015 System Fabric Works, Inc. All rights reserved.
*/
#include "rxe.h"
Soft RoCE driver Soft RoCE (RXE) - The software RoCE driver ib_rxe implements the RDMA transport and registers to the RDMA core device as a kernel verbs provider. It also implements the packet IO layer. On the other hand ib_rxe registers to the Linux netdev stack as a udp encapsulating protocol, in that case RDMA, for sending and receiving packets over any Ethernet device. This yields a RDMA transport over the UDP/Ethernet network layer forming a RoCEv2 compatible device. The configuration procedure of the Soft RoCE drivers requires binding to any existing Ethernet network device. This is done with /sys interface. A userspace Soft RoCE library (librxe) provides user applications the ability to run with Soft RoCE devices. The use of rxe verbs ins user space requires the inclusion of librxe as a device specifics plug-in to libibverbs. librxe is packaged separately. Architecture: +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ +---------------------------------------------------------------+ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Soft RoCE resources: [1[ https://github.com/SoftRoCE/librxe-dev librxe - source code in Github [2] https://github.com/SoftRoCE/rxe-dev/wiki/rxe-dev:-Home - Soft RoCE Wiki page [3] https://github.com/SoftRoCE/librxe-dev - Soft RoCE userspace library Signed-off-by: Kamal Heib <kamalh@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Reviewed-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-16 16:45:23 +03:00
static struct workqueue_struct *rxe_wq;
int rxe_alloc_wq(void)
{
rxe_wq = alloc_workqueue("rxe_wq", WQ_UNBOUND, WQ_MAX_ACTIVE);
if (!rxe_wq)
return -ENOMEM;
return 0;
}
void rxe_destroy_wq(void)
{
destroy_workqueue(rxe_wq);
}
/* Check if task is idle i.e. not running, not scheduled in
* work queue and not draining. If so move to busy to
* reserve a slot in do_task() by setting to busy and taking
* a qp reference to cover the gap from now until the task finishes.
* state will move out of busy if task returns a non zero value
* in do_task(). If state is already busy it is raised to armed
* to indicate to do_task that additional pass should be made
* over the task.
* Context: caller should hold task->lock.
* Returns: true if state transitioned from idle to busy else false.
*/
static bool __reserve_if_idle(struct rxe_task *task)
{
WARN_ON(rxe_read(task->qp) <= 0);
if (task->state == TASK_STATE_IDLE) {
rxe_get(task->qp);
task->state = TASK_STATE_BUSY;
task->num_sched++;
return true;
}
if (task->state == TASK_STATE_BUSY)
task->state = TASK_STATE_ARMED;
return false;
}
/* check if task is idle or drained and not currently
* scheduled in the work queue. This routine is
* called by rxe_cleanup_task or rxe_disable_task to
* see if the queue is empty.
* Context: caller should hold task->lock.
* Returns true if done else false.
*/
static bool __is_done(struct rxe_task *task)
{
if (work_pending(&task->work))
return false;
if (task->state == TASK_STATE_IDLE ||
task->state == TASK_STATE_DRAINED) {
return true;
}
return false;
}
/* a locked version of __is_done */
static bool is_done(struct rxe_task *task)
{
unsigned long flags;
int done;
spin_lock_irqsave(&task->lock, flags);
done = __is_done(task);
spin_unlock_irqrestore(&task->lock, flags);
return done;
}
/* do_task is a wrapper for the three tasks (requester,
* completer, responder) and calls them in a loop until
* they return a non-zero value. It is called indirectly
* when rxe_sched_task schedules the task. They must
* call __reserve_if_idle to move the task to busy before
* calling or scheduling. The task can also be moved to
* drained or invalid by calls to rxe_cleanup_task or
* rxe_disable_task. In that case tasks which get here
* are not executed but just flushed. The tasks are
* designed to look to see if there is work to do and
* then do part of it before returning here with a return
* value of zero until all the work has been consumed then
* it returns a non-zero value.
* The number of times the task can be run is limited by
* max iterations so one task cannot hold the cpu forever.
* If the limit is hit and work remains the task is rescheduled.
Soft RoCE driver Soft RoCE (RXE) - The software RoCE driver ib_rxe implements the RDMA transport and registers to the RDMA core device as a kernel verbs provider. It also implements the packet IO layer. On the other hand ib_rxe registers to the Linux netdev stack as a udp encapsulating protocol, in that case RDMA, for sending and receiving packets over any Ethernet device. This yields a RDMA transport over the UDP/Ethernet network layer forming a RoCEv2 compatible device. The configuration procedure of the Soft RoCE drivers requires binding to any existing Ethernet network device. This is done with /sys interface. A userspace Soft RoCE library (librxe) provides user applications the ability to run with Soft RoCE devices. The use of rxe verbs ins user space requires the inclusion of librxe as a device specifics plug-in to libibverbs. librxe is packaged separately. Architecture: +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ +---------------------------------------------------------------+ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Soft RoCE resources: [1[ https://github.com/SoftRoCE/librxe-dev librxe - source code in Github [2] https://github.com/SoftRoCE/rxe-dev/wiki/rxe-dev:-Home - Soft RoCE Wiki page [3] https://github.com/SoftRoCE/librxe-dev - Soft RoCE userspace library Signed-off-by: Kamal Heib <kamalh@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Reviewed-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-16 16:45:23 +03:00
*/
static void do_task(struct rxe_task *task)
Soft RoCE driver Soft RoCE (RXE) - The software RoCE driver ib_rxe implements the RDMA transport and registers to the RDMA core device as a kernel verbs provider. It also implements the packet IO layer. On the other hand ib_rxe registers to the Linux netdev stack as a udp encapsulating protocol, in that case RDMA, for sending and receiving packets over any Ethernet device. This yields a RDMA transport over the UDP/Ethernet network layer forming a RoCEv2 compatible device. The configuration procedure of the Soft RoCE drivers requires binding to any existing Ethernet network device. This is done with /sys interface. A userspace Soft RoCE library (librxe) provides user applications the ability to run with Soft RoCE devices. The use of rxe verbs ins user space requires the inclusion of librxe as a device specifics plug-in to libibverbs. librxe is packaged separately. Architecture: +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ +---------------------------------------------------------------+ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Soft RoCE resources: [1[ https://github.com/SoftRoCE/librxe-dev librxe - source code in Github [2] https://github.com/SoftRoCE/rxe-dev/wiki/rxe-dev:-Home - Soft RoCE Wiki page [3] https://github.com/SoftRoCE/librxe-dev - Soft RoCE userspace library Signed-off-by: Kamal Heib <kamalh@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Reviewed-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-16 16:45:23 +03:00
{
unsigned int iterations;
unsigned long flags;
int resched = 0;
int cont;
int ret;
Soft RoCE driver Soft RoCE (RXE) - The software RoCE driver ib_rxe implements the RDMA transport and registers to the RDMA core device as a kernel verbs provider. It also implements the packet IO layer. On the other hand ib_rxe registers to the Linux netdev stack as a udp encapsulating protocol, in that case RDMA, for sending and receiving packets over any Ethernet device. This yields a RDMA transport over the UDP/Ethernet network layer forming a RoCEv2 compatible device. The configuration procedure of the Soft RoCE drivers requires binding to any existing Ethernet network device. This is done with /sys interface. A userspace Soft RoCE library (librxe) provides user applications the ability to run with Soft RoCE devices. The use of rxe verbs ins user space requires the inclusion of librxe as a device specifics plug-in to libibverbs. librxe is packaged separately. Architecture: +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ +---------------------------------------------------------------+ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Soft RoCE resources: [1[ https://github.com/SoftRoCE/librxe-dev librxe - source code in Github [2] https://github.com/SoftRoCE/rxe-dev/wiki/rxe-dev:-Home - Soft RoCE Wiki page [3] https://github.com/SoftRoCE/librxe-dev - Soft RoCE userspace library Signed-off-by: Kamal Heib <kamalh@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Reviewed-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-16 16:45:23 +03:00
WARN_ON(rxe_read(task->qp) <= 0);
Soft RoCE driver Soft RoCE (RXE) - The software RoCE driver ib_rxe implements the RDMA transport and registers to the RDMA core device as a kernel verbs provider. It also implements the packet IO layer. On the other hand ib_rxe registers to the Linux netdev stack as a udp encapsulating protocol, in that case RDMA, for sending and receiving packets over any Ethernet device. This yields a RDMA transport over the UDP/Ethernet network layer forming a RoCEv2 compatible device. The configuration procedure of the Soft RoCE drivers requires binding to any existing Ethernet network device. This is done with /sys interface. A userspace Soft RoCE library (librxe) provides user applications the ability to run with Soft RoCE devices. The use of rxe verbs ins user space requires the inclusion of librxe as a device specifics plug-in to libibverbs. librxe is packaged separately. Architecture: +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ +---------------------------------------------------------------+ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Soft RoCE resources: [1[ https://github.com/SoftRoCE/librxe-dev librxe - source code in Github [2] https://github.com/SoftRoCE/rxe-dev/wiki/rxe-dev:-Home - Soft RoCE Wiki page [3] https://github.com/SoftRoCE/librxe-dev - Soft RoCE userspace library Signed-off-by: Kamal Heib <kamalh@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Reviewed-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-16 16:45:23 +03:00
spin_lock_irqsave(&task->lock, flags);
if (task->state >= TASK_STATE_DRAINED) {
rxe_put(task->qp);
task->num_done++;
spin_unlock_irqrestore(&task->lock, flags);
Soft RoCE driver Soft RoCE (RXE) - The software RoCE driver ib_rxe implements the RDMA transport and registers to the RDMA core device as a kernel verbs provider. It also implements the packet IO layer. On the other hand ib_rxe registers to the Linux netdev stack as a udp encapsulating protocol, in that case RDMA, for sending and receiving packets over any Ethernet device. This yields a RDMA transport over the UDP/Ethernet network layer forming a RoCEv2 compatible device. The configuration procedure of the Soft RoCE drivers requires binding to any existing Ethernet network device. This is done with /sys interface. A userspace Soft RoCE library (librxe) provides user applications the ability to run with Soft RoCE devices. The use of rxe verbs ins user space requires the inclusion of librxe as a device specifics plug-in to libibverbs. librxe is packaged separately. Architecture: +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ +---------------------------------------------------------------+ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Soft RoCE resources: [1[ https://github.com/SoftRoCE/librxe-dev librxe - source code in Github [2] https://github.com/SoftRoCE/rxe-dev/wiki/rxe-dev:-Home - Soft RoCE Wiki page [3] https://github.com/SoftRoCE/librxe-dev - Soft RoCE userspace library Signed-off-by: Kamal Heib <kamalh@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Reviewed-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-16 16:45:23 +03:00
return;
}
spin_unlock_irqrestore(&task->lock, flags);
Soft RoCE driver Soft RoCE (RXE) - The software RoCE driver ib_rxe implements the RDMA transport and registers to the RDMA core device as a kernel verbs provider. It also implements the packet IO layer. On the other hand ib_rxe registers to the Linux netdev stack as a udp encapsulating protocol, in that case RDMA, for sending and receiving packets over any Ethernet device. This yields a RDMA transport over the UDP/Ethernet network layer forming a RoCEv2 compatible device. The configuration procedure of the Soft RoCE drivers requires binding to any existing Ethernet network device. This is done with /sys interface. A userspace Soft RoCE library (librxe) provides user applications the ability to run with Soft RoCE devices. The use of rxe verbs ins user space requires the inclusion of librxe as a device specifics plug-in to libibverbs. librxe is packaged separately. Architecture: +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ +---------------------------------------------------------------+ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Soft RoCE resources: [1[ https://github.com/SoftRoCE/librxe-dev librxe - source code in Github [2] https://github.com/SoftRoCE/rxe-dev/wiki/rxe-dev:-Home - Soft RoCE Wiki page [3] https://github.com/SoftRoCE/librxe-dev - Soft RoCE userspace library Signed-off-by: Kamal Heib <kamalh@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Reviewed-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-16 16:45:23 +03:00
do {
iterations = RXE_MAX_ITERATIONS;
Soft RoCE driver Soft RoCE (RXE) - The software RoCE driver ib_rxe implements the RDMA transport and registers to the RDMA core device as a kernel verbs provider. It also implements the packet IO layer. On the other hand ib_rxe registers to the Linux netdev stack as a udp encapsulating protocol, in that case RDMA, for sending and receiving packets over any Ethernet device. This yields a RDMA transport over the UDP/Ethernet network layer forming a RoCEv2 compatible device. The configuration procedure of the Soft RoCE drivers requires binding to any existing Ethernet network device. This is done with /sys interface. A userspace Soft RoCE library (librxe) provides user applications the ability to run with Soft RoCE devices. The use of rxe verbs ins user space requires the inclusion of librxe as a device specifics plug-in to libibverbs. librxe is packaged separately. Architecture: +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ +---------------------------------------------------------------+ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Soft RoCE resources: [1[ https://github.com/SoftRoCE/librxe-dev librxe - source code in Github [2] https://github.com/SoftRoCE/rxe-dev/wiki/rxe-dev:-Home - Soft RoCE Wiki page [3] https://github.com/SoftRoCE/librxe-dev - Soft RoCE userspace library Signed-off-by: Kamal Heib <kamalh@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Reviewed-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-16 16:45:23 +03:00
cont = 0;
do {
ret = task->func(task->qp);
} while (ret == 0 && iterations-- > 0);
spin_lock_irqsave(&task->lock, flags);
/* we're not done yet but we ran out of iterations.
* yield the cpu and reschedule the task
*/
if (!ret) {
task->state = TASK_STATE_IDLE;
resched = 1;
goto exit;
}
Soft RoCE driver Soft RoCE (RXE) - The software RoCE driver ib_rxe implements the RDMA transport and registers to the RDMA core device as a kernel verbs provider. It also implements the packet IO layer. On the other hand ib_rxe registers to the Linux netdev stack as a udp encapsulating protocol, in that case RDMA, for sending and receiving packets over any Ethernet device. This yields a RDMA transport over the UDP/Ethernet network layer forming a RoCEv2 compatible device. The configuration procedure of the Soft RoCE drivers requires binding to any existing Ethernet network device. This is done with /sys interface. A userspace Soft RoCE library (librxe) provides user applications the ability to run with Soft RoCE devices. The use of rxe verbs ins user space requires the inclusion of librxe as a device specifics plug-in to libibverbs. librxe is packaged separately. Architecture: +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ +---------------------------------------------------------------+ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Soft RoCE resources: [1[ https://github.com/SoftRoCE/librxe-dev librxe - source code in Github [2] https://github.com/SoftRoCE/rxe-dev/wiki/rxe-dev:-Home - Soft RoCE Wiki page [3] https://github.com/SoftRoCE/librxe-dev - Soft RoCE userspace library Signed-off-by: Kamal Heib <kamalh@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Reviewed-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-16 16:45:23 +03:00
switch (task->state) {
case TASK_STATE_BUSY:
task->state = TASK_STATE_IDLE;
Soft RoCE driver Soft RoCE (RXE) - The software RoCE driver ib_rxe implements the RDMA transport and registers to the RDMA core device as a kernel verbs provider. It also implements the packet IO layer. On the other hand ib_rxe registers to the Linux netdev stack as a udp encapsulating protocol, in that case RDMA, for sending and receiving packets over any Ethernet device. This yields a RDMA transport over the UDP/Ethernet network layer forming a RoCEv2 compatible device. The configuration procedure of the Soft RoCE drivers requires binding to any existing Ethernet network device. This is done with /sys interface. A userspace Soft RoCE library (librxe) provides user applications the ability to run with Soft RoCE devices. The use of rxe verbs ins user space requires the inclusion of librxe as a device specifics plug-in to libibverbs. librxe is packaged separately. Architecture: +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ +---------------------------------------------------------------+ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Soft RoCE resources: [1[ https://github.com/SoftRoCE/librxe-dev librxe - source code in Github [2] https://github.com/SoftRoCE/rxe-dev/wiki/rxe-dev:-Home - Soft RoCE Wiki page [3] https://github.com/SoftRoCE/librxe-dev - Soft RoCE userspace library Signed-off-by: Kamal Heib <kamalh@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Reviewed-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-16 16:45:23 +03:00
break;
/* someone tried to schedule the task while we
* were running, keep going
Soft RoCE driver Soft RoCE (RXE) - The software RoCE driver ib_rxe implements the RDMA transport and registers to the RDMA core device as a kernel verbs provider. It also implements the packet IO layer. On the other hand ib_rxe registers to the Linux netdev stack as a udp encapsulating protocol, in that case RDMA, for sending and receiving packets over any Ethernet device. This yields a RDMA transport over the UDP/Ethernet network layer forming a RoCEv2 compatible device. The configuration procedure of the Soft RoCE drivers requires binding to any existing Ethernet network device. This is done with /sys interface. A userspace Soft RoCE library (librxe) provides user applications the ability to run with Soft RoCE devices. The use of rxe verbs ins user space requires the inclusion of librxe as a device specifics plug-in to libibverbs. librxe is packaged separately. Architecture: +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ +---------------------------------------------------------------+ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Soft RoCE resources: [1[ https://github.com/SoftRoCE/librxe-dev librxe - source code in Github [2] https://github.com/SoftRoCE/rxe-dev/wiki/rxe-dev:-Home - Soft RoCE Wiki page [3] https://github.com/SoftRoCE/librxe-dev - Soft RoCE userspace library Signed-off-by: Kamal Heib <kamalh@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Reviewed-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-16 16:45:23 +03:00
*/
case TASK_STATE_ARMED:
task->state = TASK_STATE_BUSY;
cont = 1;
break;
case TASK_STATE_DRAINING:
task->state = TASK_STATE_DRAINED;
break;
Soft RoCE driver Soft RoCE (RXE) - The software RoCE driver ib_rxe implements the RDMA transport and registers to the RDMA core device as a kernel verbs provider. It also implements the packet IO layer. On the other hand ib_rxe registers to the Linux netdev stack as a udp encapsulating protocol, in that case RDMA, for sending and receiving packets over any Ethernet device. This yields a RDMA transport over the UDP/Ethernet network layer forming a RoCEv2 compatible device. The configuration procedure of the Soft RoCE drivers requires binding to any existing Ethernet network device. This is done with /sys interface. A userspace Soft RoCE library (librxe) provides user applications the ability to run with Soft RoCE devices. The use of rxe verbs ins user space requires the inclusion of librxe as a device specifics plug-in to libibverbs. librxe is packaged separately. Architecture: +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ +---------------------------------------------------------------+ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Soft RoCE resources: [1[ https://github.com/SoftRoCE/librxe-dev librxe - source code in Github [2] https://github.com/SoftRoCE/rxe-dev/wiki/rxe-dev:-Home - Soft RoCE Wiki page [3] https://github.com/SoftRoCE/librxe-dev - Soft RoCE userspace library Signed-off-by: Kamal Heib <kamalh@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Reviewed-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-16 16:45:23 +03:00
default:
WARN_ON(1);
rxe_dbg_qp(task->qp, "unexpected task state = %d\n",
task->state);
task->state = TASK_STATE_IDLE;
}
exit:
if (!cont) {
task->num_done++;
if (WARN_ON(task->num_done != task->num_sched))
rxe_dbg_qp(
task->qp,
"%ld tasks scheduled, %ld tasks done\n",
task->num_sched, task->num_done);
Soft RoCE driver Soft RoCE (RXE) - The software RoCE driver ib_rxe implements the RDMA transport and registers to the RDMA core device as a kernel verbs provider. It also implements the packet IO layer. On the other hand ib_rxe registers to the Linux netdev stack as a udp encapsulating protocol, in that case RDMA, for sending and receiving packets over any Ethernet device. This yields a RDMA transport over the UDP/Ethernet network layer forming a RoCEv2 compatible device. The configuration procedure of the Soft RoCE drivers requires binding to any existing Ethernet network device. This is done with /sys interface. A userspace Soft RoCE library (librxe) provides user applications the ability to run with Soft RoCE devices. The use of rxe verbs ins user space requires the inclusion of librxe as a device specifics plug-in to libibverbs. librxe is packaged separately. Architecture: +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ +---------------------------------------------------------------+ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Soft RoCE resources: [1[ https://github.com/SoftRoCE/librxe-dev librxe - source code in Github [2] https://github.com/SoftRoCE/rxe-dev/wiki/rxe-dev:-Home - Soft RoCE Wiki page [3] https://github.com/SoftRoCE/librxe-dev - Soft RoCE userspace library Signed-off-by: Kamal Heib <kamalh@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Reviewed-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-16 16:45:23 +03:00
}
spin_unlock_irqrestore(&task->lock, flags);
Soft RoCE driver Soft RoCE (RXE) - The software RoCE driver ib_rxe implements the RDMA transport and registers to the RDMA core device as a kernel verbs provider. It also implements the packet IO layer. On the other hand ib_rxe registers to the Linux netdev stack as a udp encapsulating protocol, in that case RDMA, for sending and receiving packets over any Ethernet device. This yields a RDMA transport over the UDP/Ethernet network layer forming a RoCEv2 compatible device. The configuration procedure of the Soft RoCE drivers requires binding to any existing Ethernet network device. This is done with /sys interface. A userspace Soft RoCE library (librxe) provides user applications the ability to run with Soft RoCE devices. The use of rxe verbs ins user space requires the inclusion of librxe as a device specifics plug-in to libibverbs. librxe is packaged separately. Architecture: +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ +---------------------------------------------------------------+ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Soft RoCE resources: [1[ https://github.com/SoftRoCE/librxe-dev librxe - source code in Github [2] https://github.com/SoftRoCE/rxe-dev/wiki/rxe-dev:-Home - Soft RoCE Wiki page [3] https://github.com/SoftRoCE/librxe-dev - Soft RoCE userspace library Signed-off-by: Kamal Heib <kamalh@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Reviewed-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-16 16:45:23 +03:00
} while (cont);
task->ret = ret;
if (resched)
rxe_sched_task(task);
rxe_put(task->qp);
Soft RoCE driver Soft RoCE (RXE) - The software RoCE driver ib_rxe implements the RDMA transport and registers to the RDMA core device as a kernel verbs provider. It also implements the packet IO layer. On the other hand ib_rxe registers to the Linux netdev stack as a udp encapsulating protocol, in that case RDMA, for sending and receiving packets over any Ethernet device. This yields a RDMA transport over the UDP/Ethernet network layer forming a RoCEv2 compatible device. The configuration procedure of the Soft RoCE drivers requires binding to any existing Ethernet network device. This is done with /sys interface. A userspace Soft RoCE library (librxe) provides user applications the ability to run with Soft RoCE devices. The use of rxe verbs ins user space requires the inclusion of librxe as a device specifics plug-in to libibverbs. librxe is packaged separately. Architecture: +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ +---------------------------------------------------------------+ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Soft RoCE resources: [1[ https://github.com/SoftRoCE/librxe-dev librxe - source code in Github [2] https://github.com/SoftRoCE/rxe-dev/wiki/rxe-dev:-Home - Soft RoCE Wiki page [3] https://github.com/SoftRoCE/librxe-dev - Soft RoCE userspace library Signed-off-by: Kamal Heib <kamalh@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Reviewed-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-16 16:45:23 +03:00
}
/* wrapper around do_task to fix argument for work queue */
static void do_work(struct work_struct *work)
{
do_task(container_of(work, struct rxe_task, work));
}
int rxe_init_task(struct rxe_task *task, struct rxe_qp *qp,
int (*func)(struct rxe_qp *))
Soft RoCE driver Soft RoCE (RXE) - The software RoCE driver ib_rxe implements the RDMA transport and registers to the RDMA core device as a kernel verbs provider. It also implements the packet IO layer. On the other hand ib_rxe registers to the Linux netdev stack as a udp encapsulating protocol, in that case RDMA, for sending and receiving packets over any Ethernet device. This yields a RDMA transport over the UDP/Ethernet network layer forming a RoCEv2 compatible device. The configuration procedure of the Soft RoCE drivers requires binding to any existing Ethernet network device. This is done with /sys interface. A userspace Soft RoCE library (librxe) provides user applications the ability to run with Soft RoCE devices. The use of rxe verbs ins user space requires the inclusion of librxe as a device specifics plug-in to libibverbs. librxe is packaged separately. Architecture: +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ +---------------------------------------------------------------+ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Soft RoCE resources: [1[ https://github.com/SoftRoCE/librxe-dev librxe - source code in Github [2] https://github.com/SoftRoCE/rxe-dev/wiki/rxe-dev:-Home - Soft RoCE Wiki page [3] https://github.com/SoftRoCE/librxe-dev - Soft RoCE userspace library Signed-off-by: Kamal Heib <kamalh@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Reviewed-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-16 16:45:23 +03:00
{
WARN_ON(rxe_read(qp) <= 0);
task->qp = qp;
task->func = func;
task->state = TASK_STATE_IDLE;
spin_lock_init(&task->lock);
INIT_WORK(&task->work, do_work);
Soft RoCE driver Soft RoCE (RXE) - The software RoCE driver ib_rxe implements the RDMA transport and registers to the RDMA core device as a kernel verbs provider. It also implements the packet IO layer. On the other hand ib_rxe registers to the Linux netdev stack as a udp encapsulating protocol, in that case RDMA, for sending and receiving packets over any Ethernet device. This yields a RDMA transport over the UDP/Ethernet network layer forming a RoCEv2 compatible device. The configuration procedure of the Soft RoCE drivers requires binding to any existing Ethernet network device. This is done with /sys interface. A userspace Soft RoCE library (librxe) provides user applications the ability to run with Soft RoCE devices. The use of rxe verbs ins user space requires the inclusion of librxe as a device specifics plug-in to libibverbs. librxe is packaged separately. Architecture: +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ +---------------------------------------------------------------+ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Soft RoCE resources: [1[ https://github.com/SoftRoCE/librxe-dev librxe - source code in Github [2] https://github.com/SoftRoCE/rxe-dev/wiki/rxe-dev:-Home - Soft RoCE Wiki page [3] https://github.com/SoftRoCE/librxe-dev - Soft RoCE userspace library Signed-off-by: Kamal Heib <kamalh@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Reviewed-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-16 16:45:23 +03:00
return 0;
}
/* rxe_cleanup_task is only called from rxe_do_qp_cleanup in
* process context. The qp is already completed with no
* remaining references. Once the queue is drained the
* task is moved to invalid and returns. The qp cleanup
* code then calls the task functions directly without
* using the task struct to drain any late arriving packets
* or work requests.
*/
Soft RoCE driver Soft RoCE (RXE) - The software RoCE driver ib_rxe implements the RDMA transport and registers to the RDMA core device as a kernel verbs provider. It also implements the packet IO layer. On the other hand ib_rxe registers to the Linux netdev stack as a udp encapsulating protocol, in that case RDMA, for sending and receiving packets over any Ethernet device. This yields a RDMA transport over the UDP/Ethernet network layer forming a RoCEv2 compatible device. The configuration procedure of the Soft RoCE drivers requires binding to any existing Ethernet network device. This is done with /sys interface. A userspace Soft RoCE library (librxe) provides user applications the ability to run with Soft RoCE devices. The use of rxe verbs ins user space requires the inclusion of librxe as a device specifics plug-in to libibverbs. librxe is packaged separately. Architecture: +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ +---------------------------------------------------------------+ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Soft RoCE resources: [1[ https://github.com/SoftRoCE/librxe-dev librxe - source code in Github [2] https://github.com/SoftRoCE/rxe-dev/wiki/rxe-dev:-Home - Soft RoCE Wiki page [3] https://github.com/SoftRoCE/librxe-dev - Soft RoCE userspace library Signed-off-by: Kamal Heib <kamalh@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Reviewed-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-16 16:45:23 +03:00
void rxe_cleanup_task(struct rxe_task *task)
{
unsigned long flags;
spin_lock_irqsave(&task->lock, flags);
if (!__is_done(task) && task->state < TASK_STATE_DRAINED) {
task->state = TASK_STATE_DRAINING;
} else {
task->state = TASK_STATE_INVALID;
spin_unlock_irqrestore(&task->lock, flags);
return;
}
spin_unlock_irqrestore(&task->lock, flags);
/* now the task cannot be scheduled or run just wait
* for the previously scheduled tasks to finish.
*/
while (!is_done(task))
cond_resched();
spin_lock_irqsave(&task->lock, flags);
task->state = TASK_STATE_INVALID;
spin_unlock_irqrestore(&task->lock, flags);
Soft RoCE driver Soft RoCE (RXE) - The software RoCE driver ib_rxe implements the RDMA transport and registers to the RDMA core device as a kernel verbs provider. It also implements the packet IO layer. On the other hand ib_rxe registers to the Linux netdev stack as a udp encapsulating protocol, in that case RDMA, for sending and receiving packets over any Ethernet device. This yields a RDMA transport over the UDP/Ethernet network layer forming a RoCEv2 compatible device. The configuration procedure of the Soft RoCE drivers requires binding to any existing Ethernet network device. This is done with /sys interface. A userspace Soft RoCE library (librxe) provides user applications the ability to run with Soft RoCE devices. The use of rxe verbs ins user space requires the inclusion of librxe as a device specifics plug-in to libibverbs. librxe is packaged separately. Architecture: +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ +---------------------------------------------------------------+ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Soft RoCE resources: [1[ https://github.com/SoftRoCE/librxe-dev librxe - source code in Github [2] https://github.com/SoftRoCE/rxe-dev/wiki/rxe-dev:-Home - Soft RoCE Wiki page [3] https://github.com/SoftRoCE/librxe-dev - Soft RoCE userspace library Signed-off-by: Kamal Heib <kamalh@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Reviewed-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-16 16:45:23 +03:00
}
/* schedule the task to run later as a work queue entry.
* the queue_work call can be called holding
* the lock.
*/
void rxe_sched_task(struct rxe_task *task)
{
unsigned long flags;
WARN_ON(rxe_read(task->qp) <= 0);
spin_lock_irqsave(&task->lock, flags);
if (__reserve_if_idle(task))
queue_work(rxe_wq, &task->work);
spin_unlock_irqrestore(&task->lock, flags);
Soft RoCE driver Soft RoCE (RXE) - The software RoCE driver ib_rxe implements the RDMA transport and registers to the RDMA core device as a kernel verbs provider. It also implements the packet IO layer. On the other hand ib_rxe registers to the Linux netdev stack as a udp encapsulating protocol, in that case RDMA, for sending and receiving packets over any Ethernet device. This yields a RDMA transport over the UDP/Ethernet network layer forming a RoCEv2 compatible device. The configuration procedure of the Soft RoCE drivers requires binding to any existing Ethernet network device. This is done with /sys interface. A userspace Soft RoCE library (librxe) provides user applications the ability to run with Soft RoCE devices. The use of rxe verbs ins user space requires the inclusion of librxe as a device specifics plug-in to libibverbs. librxe is packaged separately. Architecture: +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ +---------------------------------------------------------------+ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Soft RoCE resources: [1[ https://github.com/SoftRoCE/librxe-dev librxe - source code in Github [2] https://github.com/SoftRoCE/rxe-dev/wiki/rxe-dev:-Home - Soft RoCE Wiki page [3] https://github.com/SoftRoCE/librxe-dev - Soft RoCE userspace library Signed-off-by: Kamal Heib <kamalh@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Reviewed-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-16 16:45:23 +03:00
}
/* rxe_disable/enable_task are only called from
* rxe_modify_qp in process context. Task is moved
* to the drained state by do_task.
*/
Soft RoCE driver Soft RoCE (RXE) - The software RoCE driver ib_rxe implements the RDMA transport and registers to the RDMA core device as a kernel verbs provider. It also implements the packet IO layer. On the other hand ib_rxe registers to the Linux netdev stack as a udp encapsulating protocol, in that case RDMA, for sending and receiving packets over any Ethernet device. This yields a RDMA transport over the UDP/Ethernet network layer forming a RoCEv2 compatible device. The configuration procedure of the Soft RoCE drivers requires binding to any existing Ethernet network device. This is done with /sys interface. A userspace Soft RoCE library (librxe) provides user applications the ability to run with Soft RoCE devices. The use of rxe verbs ins user space requires the inclusion of librxe as a device specifics plug-in to libibverbs. librxe is packaged separately. Architecture: +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ +---------------------------------------------------------------+ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Soft RoCE resources: [1[ https://github.com/SoftRoCE/librxe-dev librxe - source code in Github [2] https://github.com/SoftRoCE/rxe-dev/wiki/rxe-dev:-Home - Soft RoCE Wiki page [3] https://github.com/SoftRoCE/librxe-dev - Soft RoCE userspace library Signed-off-by: Kamal Heib <kamalh@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Reviewed-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-16 16:45:23 +03:00
void rxe_disable_task(struct rxe_task *task)
{
unsigned long flags;
WARN_ON(rxe_read(task->qp) <= 0);
spin_lock_irqsave(&task->lock, flags);
if (!__is_done(task) && task->state < TASK_STATE_DRAINED) {
task->state = TASK_STATE_DRAINING;
} else {
task->state = TASK_STATE_DRAINED;
spin_unlock_irqrestore(&task->lock, flags);
return;
}
spin_unlock_irqrestore(&task->lock, flags);
while (!is_done(task))
cond_resched();
spin_lock_irqsave(&task->lock, flags);
task->state = TASK_STATE_DRAINED;
spin_unlock_irqrestore(&task->lock, flags);
Soft RoCE driver Soft RoCE (RXE) - The software RoCE driver ib_rxe implements the RDMA transport and registers to the RDMA core device as a kernel verbs provider. It also implements the packet IO layer. On the other hand ib_rxe registers to the Linux netdev stack as a udp encapsulating protocol, in that case RDMA, for sending and receiving packets over any Ethernet device. This yields a RDMA transport over the UDP/Ethernet network layer forming a RoCEv2 compatible device. The configuration procedure of the Soft RoCE drivers requires binding to any existing Ethernet network device. This is done with /sys interface. A userspace Soft RoCE library (librxe) provides user applications the ability to run with Soft RoCE devices. The use of rxe verbs ins user space requires the inclusion of librxe as a device specifics plug-in to libibverbs. librxe is packaged separately. Architecture: +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ +---------------------------------------------------------------+ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Soft RoCE resources: [1[ https://github.com/SoftRoCE/librxe-dev librxe - source code in Github [2] https://github.com/SoftRoCE/rxe-dev/wiki/rxe-dev:-Home - Soft RoCE Wiki page [3] https://github.com/SoftRoCE/librxe-dev - Soft RoCE userspace library Signed-off-by: Kamal Heib <kamalh@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Reviewed-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-16 16:45:23 +03:00
}
void rxe_enable_task(struct rxe_task *task)
{
unsigned long flags;
WARN_ON(rxe_read(task->qp) <= 0);
spin_lock_irqsave(&task->lock, flags);
if (task->state == TASK_STATE_INVALID) {
spin_unlock_irqrestore(&task->lock, flags);
return;
}
task->state = TASK_STATE_IDLE;
spin_unlock_irqrestore(&task->lock, flags);
Soft RoCE driver Soft RoCE (RXE) - The software RoCE driver ib_rxe implements the RDMA transport and registers to the RDMA core device as a kernel verbs provider. It also implements the packet IO layer. On the other hand ib_rxe registers to the Linux netdev stack as a udp encapsulating protocol, in that case RDMA, for sending and receiving packets over any Ethernet device. This yields a RDMA transport over the UDP/Ethernet network layer forming a RoCEv2 compatible device. The configuration procedure of the Soft RoCE drivers requires binding to any existing Ethernet network device. This is done with /sys interface. A userspace Soft RoCE library (librxe) provides user applications the ability to run with Soft RoCE devices. The use of rxe verbs ins user space requires the inclusion of librxe as a device specifics plug-in to libibverbs. librxe is packaged separately. Architecture: +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ +---------------------------------------------------------------+ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +-----------------------------------------------------------+ | Application | +-----------------------------------------------------------+ +-----------------------------------+ | libibverbs | User +-----------------------------------+ +----------------+ +----------------+ | librxe | | HW RoCE lib | +----------------+ +----------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +--------------+ +------------+ | Sockets | | RDMA ULP | +--------------+ +------------+ +--------------+ +---------------------+ | TCP/IP | | ib_core | +--------------+ +---------------------+ +------------+ +----------------+ Kernel | ib_rxe | | HW RoCE driver | +------------+ +----------------+ +------------------------------------+ | NIC driver | +------------------------------------+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Soft RoCE resources: [1[ https://github.com/SoftRoCE/librxe-dev librxe - source code in Github [2] https://github.com/SoftRoCE/rxe-dev/wiki/rxe-dev:-Home - Soft RoCE Wiki page [3] https://github.com/SoftRoCE/librxe-dev - Soft RoCE userspace library Signed-off-by: Kamal Heib <kamalh@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Reviewed-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-16 16:45:23 +03:00
}