linux/drivers/gpu/drm/renesas/shmobile/shmob_drm_drv.c

298 lines
7.1 KiB
C
Raw Permalink Normal View History

// SPDX-License-Identifier: GPL-2.0+
/*
* shmob_drm_drv.c -- SH Mobile DRM driver
*
* Copyright (C) 2012 Renesas Electronics Corporation
*
* Laurent Pinchart (laurent.pinchart@ideasonboard.com)
*/
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/mm.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/pm.h>
#include <linux/pm_runtime.h>
#include <linux/slab.h>
#include <drm/clients/drm_client_setup.h>
#include <drm/drm_atomic_helper.h>
#include <drm/drm_drv.h>
#include <drm/drm_fbdev_dma.h>
#include <drm/drm_fourcc.h>
drm/gem: rename GEM CMA helpers to GEM DMA helpers Rename "GEM CMA" helpers to "GEM DMA" helpers - considering the hierarchy of APIs (mm/cma -> dma -> gem dma) calling them "GEM DMA" seems to be more applicable. Besides that, commit e57924d4ae80 ("drm/doc: Task to rename CMA helpers") requests to rename the CMA helpers and implies that people seem to be confused about the naming. In order to do this renaming the following script was used: ``` #!/bin/bash DIRS="drivers/gpu include/drm Documentation/gpu" REGEX_SYM_UPPER="[0-9A-Z_\-]" REGEX_SYM_LOWER="[0-9a-z_\-]" REGEX_GREP_UPPER="(${REGEX_SYM_UPPER}*)(GEM)_CMA_(${REGEX_SYM_UPPER}*)" REGEX_GREP_LOWER="(${REGEX_SYM_LOWER}*)(gem)_cma_(${REGEX_SYM_LOWER}*)" REGEX_SED_UPPER="s/${REGEX_GREP_UPPER}/\1\2_DMA_\3/g" REGEX_SED_LOWER="s/${REGEX_GREP_LOWER}/\1\2_dma_\3/g" # Find all upper case 'CMA' symbols and replace them with 'DMA'. for ff in $(grep -REHl "${REGEX_GREP_UPPER}" $DIRS) do sed -i -E "$REGEX_SED_UPPER" $ff done # Find all lower case 'cma' symbols and replace them with 'dma'. for ff in $(grep -REHl "${REGEX_GREP_LOWER}" $DIRS) do sed -i -E "$REGEX_SED_LOWER" $ff done # Replace all occurrences of 'CMA' / 'cma' in comments and # documentation files with 'DMA' / 'dma'. for ff in $(grep -RiHl " cma " $DIRS) do sed -i -E "s/ cma / dma /g" $ff sed -i -E "s/ CMA / DMA /g" $ff done # Rename all 'cma_obj's to 'dma_obj'. for ff in $(grep -RiHl "cma_obj" $DIRS) do sed -i -E "s/cma_obj/dma_obj/g" $ff done ``` Only a few more manual modifications were needed, e.g. reverting the following modifications in some DRM Kconfig files - select CMA if HAVE_DMA_CONTIGUOUS + select DMA if HAVE_DMA_CONTIGUOUS as well as manually picking the occurrences of 'CMA'/'cma' in comments and documentation which relate to "GEM CMA", but not "FB CMA". Also drivers/gpu/drm/Makefile was fixed up manually after renaming drm_gem_cma_helper.c to drm_gem_dma_helper.c. This patch is compile-time tested building a x86_64 kernel with `make allyesconfig && make drivers/gpu/drm`. Acked-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Danilo Krummrich <dakr@redhat.com> Reviewed-by: Liviu Dudau <liviu.dudau@arm.com> #drivers/gpu/drm/arm Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220802000405.949236-4-dakr@redhat.com
2022-08-02 02:04:03 +02:00
#include <drm/drm_gem_dma_helper.h>
#include <drm/drm_modeset_helper.h>
#include <drm/drm_module.h>
drm: Split out drm_probe_helper.h Having the probe helper stuff (which pretty much everyone needs) in the drm_crtc_helper.h file (which atomic drivers should never need) is confusing. Split them out. To make sure I actually achieved the goal here I went through all drivers. And indeed, all atomic drivers are now free of drm_crtc_helper.h includes. v2: Make it compile. There was so much compile fail on arm drivers that I figured I'll better not include any of the acks on v1. v3: Massive rebase because i915 has lost a lot of drmP.h includes, but not all: Through drm_crtc_helper.h > drm_modeset_helper.h -> drmP.h there was still one, which this patch largely removes. Which means rolling out lots more includes all over. This will also conflict with ongoing drmP.h cleanup by others I expect. v3: Rebase on top of atomic bochs. v4: Review from Laurent for bridge/rcar/omap/shmob/core bits: - (re)move some of the added includes, use the better include files in other places (all suggested from Laurent adopted unchanged). - sort alphabetically v5: Actually try to sort them, and while at it, sort all the ones I touch. v6: Rebase onto i915 changes. v7: Rebase once more. Acked-by: Harry Wentland <harry.wentland@amd.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Acked-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Acked-by: Jani Nikula <jani.nikula@intel.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com> Acked-by: CK Hu <ck.hu@mediatek.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Liviu Dudau <liviu.dudau@arm.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: linux-arm-kernel@lists.infradead.org Cc: virtualization@lists.linux-foundation.org Cc: etnaviv@lists.freedesktop.org Cc: linux-samsung-soc@vger.kernel.org Cc: intel-gfx@lists.freedesktop.org Cc: linux-mediatek@lists.infradead.org Cc: linux-amlogic@lists.infradead.org Cc: linux-arm-msm@vger.kernel.org Cc: freedreno@lists.freedesktop.org Cc: nouveau@lists.freedesktop.org Cc: spice-devel@lists.freedesktop.org Cc: amd-gfx@lists.freedesktop.org Cc: linux-renesas-soc@vger.kernel.org Cc: linux-rockchip@lists.infradead.org Cc: linux-stm32@st-md-mailman.stormreply.com Cc: linux-tegra@vger.kernel.org Cc: xen-devel@lists.xen.org Link: https://patchwork.freedesktop.org/patch/msgid/20190117210334.13234-1-daniel.vetter@ffwll.ch
2019-01-17 22:03:34 +01:00
#include <drm/drm_probe_helper.h>
#include <drm/drm_vblank.h>
#include "shmob_drm_drv.h"
#include "shmob_drm_kms.h"
#include "shmob_drm_plane.h"
#include "shmob_drm_regs.h"
/* -----------------------------------------------------------------------------
* Hardware initialization
*/
static int shmob_drm_setup_clocks(struct shmob_drm_device *sdev,
enum shmob_drm_clk_source clksrc)
{
struct clk *clk;
char *clkname;
switch (clksrc) {
case SHMOB_DRM_CLK_BUS:
clkname = "fck";
sdev->lddckr = LDDCKR_ICKSEL_BUS;
break;
case SHMOB_DRM_CLK_PERIPHERAL:
clkname = "media";
sdev->lddckr = LDDCKR_ICKSEL_MIPI;
break;
case SHMOB_DRM_CLK_EXTERNAL:
clkname = "lclk";
sdev->lddckr = LDDCKR_ICKSEL_HDMI;
break;
default:
return -EINVAL;
}
clk = devm_clk_get(sdev->dev, clkname);
if (IS_ERR(clk)) {
dev_err(sdev->dev, "cannot get dot clock %s\n", clkname);
return PTR_ERR(clk);
}
sdev->clock = clk;
return 0;
}
/* -----------------------------------------------------------------------------
* DRM operations
*/
static irqreturn_t shmob_drm_irq(int irq, void *arg)
{
struct drm_device *dev = arg;
struct shmob_drm_device *sdev = to_shmob_device(dev);
unsigned long flags;
u32 status;
/* Acknowledge interrupts. Putting interrupt enable and interrupt flag
* bits in the same register is really brain-dead design and requires
* taking a spinlock.
*/
spin_lock_irqsave(&sdev->irq_lock, flags);
status = lcdc_read(sdev, LDINTR);
lcdc_write(sdev, LDINTR, status ^ LDINTR_STATUS_MASK);
spin_unlock_irqrestore(&sdev->irq_lock, flags);
if (status & LDINTR_VES) {
drm_crtc_handle_vblank(&sdev->crtc.base);
shmob_drm_crtc_finish_page_flip(&sdev->crtc);
}
return IRQ_HANDLED;
}
drm/gem: rename GEM CMA helpers to GEM DMA helpers Rename "GEM CMA" helpers to "GEM DMA" helpers - considering the hierarchy of APIs (mm/cma -> dma -> gem dma) calling them "GEM DMA" seems to be more applicable. Besides that, commit e57924d4ae80 ("drm/doc: Task to rename CMA helpers") requests to rename the CMA helpers and implies that people seem to be confused about the naming. In order to do this renaming the following script was used: ``` #!/bin/bash DIRS="drivers/gpu include/drm Documentation/gpu" REGEX_SYM_UPPER="[0-9A-Z_\-]" REGEX_SYM_LOWER="[0-9a-z_\-]" REGEX_GREP_UPPER="(${REGEX_SYM_UPPER}*)(GEM)_CMA_(${REGEX_SYM_UPPER}*)" REGEX_GREP_LOWER="(${REGEX_SYM_LOWER}*)(gem)_cma_(${REGEX_SYM_LOWER}*)" REGEX_SED_UPPER="s/${REGEX_GREP_UPPER}/\1\2_DMA_\3/g" REGEX_SED_LOWER="s/${REGEX_GREP_LOWER}/\1\2_dma_\3/g" # Find all upper case 'CMA' symbols and replace them with 'DMA'. for ff in $(grep -REHl "${REGEX_GREP_UPPER}" $DIRS) do sed -i -E "$REGEX_SED_UPPER" $ff done # Find all lower case 'cma' symbols and replace them with 'dma'. for ff in $(grep -REHl "${REGEX_GREP_LOWER}" $DIRS) do sed -i -E "$REGEX_SED_LOWER" $ff done # Replace all occurrences of 'CMA' / 'cma' in comments and # documentation files with 'DMA' / 'dma'. for ff in $(grep -RiHl " cma " $DIRS) do sed -i -E "s/ cma / dma /g" $ff sed -i -E "s/ CMA / DMA /g" $ff done # Rename all 'cma_obj's to 'dma_obj'. for ff in $(grep -RiHl "cma_obj" $DIRS) do sed -i -E "s/cma_obj/dma_obj/g" $ff done ``` Only a few more manual modifications were needed, e.g. reverting the following modifications in some DRM Kconfig files - select CMA if HAVE_DMA_CONTIGUOUS + select DMA if HAVE_DMA_CONTIGUOUS as well as manually picking the occurrences of 'CMA'/'cma' in comments and documentation which relate to "GEM CMA", but not "FB CMA". Also drivers/gpu/drm/Makefile was fixed up manually after renaming drm_gem_cma_helper.c to drm_gem_dma_helper.c. This patch is compile-time tested building a x86_64 kernel with `make allyesconfig && make drivers/gpu/drm`. Acked-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Danilo Krummrich <dakr@redhat.com> Reviewed-by: Liviu Dudau <liviu.dudau@arm.com> #drivers/gpu/drm/arm Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220802000405.949236-4-dakr@redhat.com
2022-08-02 02:04:03 +02:00
DEFINE_DRM_GEM_DMA_FOPS(shmob_drm_fops);
drm/<drivers>: Constify struct drm_driver Only the following drivers aren't converted: - amdgpu, because of the driver_feature mangling due to virt support. Subsequent patch will address this. - nouveau, because DRIVER_ATOMIC uapi is still not the default on the platforms where it's supported (i.e. again driver_feature mangling) - vc4, again because of driver_feature mangling - qxl, because the ioctl table is somewhere else and moving that is maybe a bit too much, hence the num_ioctls assignment prevents a const driver structure. - arcpgu, because that is stuck behind a pending tiny-fication series from me. - legacy drivers, because legacy requires non-const drm_driver. Note that for armada I also went ahead and made the ioctl array const. Only cc'ing the driver people who've not been converted (everyone else is way too much). v2: Fix one misplaced const static, should be static const (0day) v3: - Improve commit message (Sam) Acked-by: Sam Ravnborg <sam@ravnborg.org> Cc: kernel test robot <lkp@intel.com> Acked-by: Maxime Ripard <mripard@kernel.org> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Dave Airlie <airlied@redhat.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: virtualization@lists.linux-foundation.org Cc: Harry Wentland <harry.wentland@amd.com> Cc: Leo Li <sunpeng.li@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: Eric Anholt <eric@anholt.net> Cc: Maxime Ripard <mripard@kernel.org> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: nouveau@lists.freedesktop.org Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201104100425.1922351-5-daniel.vetter@ffwll.ch
2020-11-04 11:04:24 +01:00
static const struct drm_driver shmob_drm_driver = {
.driver_features = DRIVER_GEM | DRIVER_MODESET | DRIVER_ATOMIC,
drm/gem: rename GEM CMA helpers to GEM DMA helpers Rename "GEM CMA" helpers to "GEM DMA" helpers - considering the hierarchy of APIs (mm/cma -> dma -> gem dma) calling them "GEM DMA" seems to be more applicable. Besides that, commit e57924d4ae80 ("drm/doc: Task to rename CMA helpers") requests to rename the CMA helpers and implies that people seem to be confused about the naming. In order to do this renaming the following script was used: ``` #!/bin/bash DIRS="drivers/gpu include/drm Documentation/gpu" REGEX_SYM_UPPER="[0-9A-Z_\-]" REGEX_SYM_LOWER="[0-9a-z_\-]" REGEX_GREP_UPPER="(${REGEX_SYM_UPPER}*)(GEM)_CMA_(${REGEX_SYM_UPPER}*)" REGEX_GREP_LOWER="(${REGEX_SYM_LOWER}*)(gem)_cma_(${REGEX_SYM_LOWER}*)" REGEX_SED_UPPER="s/${REGEX_GREP_UPPER}/\1\2_DMA_\3/g" REGEX_SED_LOWER="s/${REGEX_GREP_LOWER}/\1\2_dma_\3/g" # Find all upper case 'CMA' symbols and replace them with 'DMA'. for ff in $(grep -REHl "${REGEX_GREP_UPPER}" $DIRS) do sed -i -E "$REGEX_SED_UPPER" $ff done # Find all lower case 'cma' symbols and replace them with 'dma'. for ff in $(grep -REHl "${REGEX_GREP_LOWER}" $DIRS) do sed -i -E "$REGEX_SED_LOWER" $ff done # Replace all occurrences of 'CMA' / 'cma' in comments and # documentation files with 'DMA' / 'dma'. for ff in $(grep -RiHl " cma " $DIRS) do sed -i -E "s/ cma / dma /g" $ff sed -i -E "s/ CMA / DMA /g" $ff done # Rename all 'cma_obj's to 'dma_obj'. for ff in $(grep -RiHl "cma_obj" $DIRS) do sed -i -E "s/cma_obj/dma_obj/g" $ff done ``` Only a few more manual modifications were needed, e.g. reverting the following modifications in some DRM Kconfig files - select CMA if HAVE_DMA_CONTIGUOUS + select DMA if HAVE_DMA_CONTIGUOUS as well as manually picking the occurrences of 'CMA'/'cma' in comments and documentation which relate to "GEM CMA", but not "FB CMA". Also drivers/gpu/drm/Makefile was fixed up manually after renaming drm_gem_cma_helper.c to drm_gem_dma_helper.c. This patch is compile-time tested building a x86_64 kernel with `make allyesconfig && make drivers/gpu/drm`. Acked-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Danilo Krummrich <dakr@redhat.com> Reviewed-by: Liviu Dudau <liviu.dudau@arm.com> #drivers/gpu/drm/arm Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220802000405.949236-4-dakr@redhat.com
2022-08-02 02:04:03 +02:00
DRM_GEM_DMA_DRIVER_OPS,
DRM_FBDEV_DMA_DRIVER_OPS,
.fops = &shmob_drm_fops,
.name = "shmob-drm",
.desc = "Renesas SH Mobile DRM",
.major = 1,
.minor = 0,
};
/* -----------------------------------------------------------------------------
* Power management
*/
static int shmob_drm_pm_suspend(struct device *dev)
{
struct shmob_drm_device *sdev = dev_get_drvdata(dev);
return drm_mode_config_helper_suspend(&sdev->ddev);
}
static int shmob_drm_pm_resume(struct device *dev)
{
struct shmob_drm_device *sdev = dev_get_drvdata(dev);
return drm_mode_config_helper_resume(&sdev->ddev);
}
static int shmob_drm_pm_runtime_suspend(struct device *dev)
{
struct shmob_drm_device *sdev = dev_get_drvdata(dev);
if (sdev->clock)
clk_disable_unprepare(sdev->clock);
return 0;
}
static int shmob_drm_pm_runtime_resume(struct device *dev)
{
struct shmob_drm_device *sdev = dev_get_drvdata(dev);
int ret;
if (sdev->clock) {
ret = clk_prepare_enable(sdev->clock);
if (ret < 0)
return ret;
}
return 0;
}
static const struct dev_pm_ops shmob_drm_pm_ops = {
SYSTEM_SLEEP_PM_OPS(shmob_drm_pm_suspend, shmob_drm_pm_resume)
RUNTIME_PM_OPS(shmob_drm_pm_runtime_suspend,
shmob_drm_pm_runtime_resume, NULL)
};
/* -----------------------------------------------------------------------------
* Platform driver
*/
static void shmob_drm_remove(struct platform_device *pdev)
{
struct shmob_drm_device *sdev = platform_get_drvdata(pdev);
struct drm_device *ddev = &sdev->ddev;
drm_dev_unregister(ddev);
drm_atomic_helper_shutdown(ddev);
drm_kms_helper_poll_fini(ddev);
}
static void shmob_drm_shutdown(struct platform_device *pdev)
{
struct shmob_drm_device *sdev = platform_get_drvdata(pdev);
drm_atomic_helper_shutdown(&sdev->ddev);
}
static int shmob_drm_probe(struct platform_device *pdev)
{
struct shmob_drm_platform_data *pdata = pdev->dev.platform_data;
const struct shmob_drm_config *config;
struct shmob_drm_device *sdev;
struct drm_device *ddev;
int ret;
config = of_device_get_match_data(&pdev->dev);
if (!config && !pdata) {
dev_err(&pdev->dev, "no platform data\n");
return -EINVAL;
}
/*
* Allocate and initialize the DRM device, driver private data, I/O
* resources and clocks.
*/
sdev = devm_drm_dev_alloc(&pdev->dev, &shmob_drm_driver,
struct shmob_drm_device, ddev);
if (IS_ERR(sdev))
return PTR_ERR(sdev);
ddev = &sdev->ddev;
sdev->dev = &pdev->dev;
if (config) {
sdev->config = *config;
} else {
sdev->pdata = pdata;
sdev->config.clk_source = pdata->clk_source;
sdev->config.clk_div = pdata->iface.clk_div;
}
spin_lock_init(&sdev->irq_lock);
platform_set_drvdata(pdev, sdev);
sdev->mmio = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(sdev->mmio))
return PTR_ERR(sdev->mmio);
ret = shmob_drm_setup_clocks(sdev, sdev->config.clk_source);
if (ret < 0)
return ret;
ret = devm_pm_runtime_enable(&pdev->dev);
if (ret)
return ret;
ret = drm_vblank_init(ddev, 1);
if (ret < 0) {
dev_err(&pdev->dev, "failed to initialize vblank\n");
return ret;
}
ret = shmob_drm_modeset_init(sdev);
if (ret < 0)
return dev_err_probe(&pdev->dev, ret,
"failed to initialize mode setting\n");
ret = platform_get_irq(pdev, 0);
if (ret < 0)
goto err_modeset_cleanup;
sdev->irq = ret;
ret = devm_request_irq(&pdev->dev, sdev->irq, shmob_drm_irq, 0,
ddev->driver->name, ddev);
if (ret < 0) {
dev_err(&pdev->dev, "failed to install IRQ handler\n");
goto err_modeset_cleanup;
}
/*
* Register the DRM device with the core and the connectors with
* sysfs.
*/
ret = drm_dev_register(ddev, 0);
if (ret < 0)
goto err_modeset_cleanup;
drm_client_setup_with_fourcc(ddev, DRM_FORMAT_RGB565);
return 0;
err_modeset_cleanup:
drm_kms_helper_poll_fini(ddev);
return ret;
}
static const struct shmob_drm_config shmob_arm_config = {
.clk_source = SHMOB_DRM_CLK_BUS,
.clk_div = 5,
};
static const struct of_device_id shmob_drm_of_table[] __maybe_unused = {
{ .compatible = "renesas,r8a7740-lcdc", .data = &shmob_arm_config, },
{ .compatible = "renesas,sh73a0-lcdc", .data = &shmob_arm_config, },
{ /* sentinel */ }
};
static struct platform_driver shmob_drm_platform_driver = {
.probe = shmob_drm_probe,
.remove = shmob_drm_remove,
.shutdown = shmob_drm_shutdown,
.driver = {
.name = "shmob-drm",
.of_match_table = of_match_ptr(shmob_drm_of_table),
.pm = &shmob_drm_pm_ops,
},
};
drm_module_platform_driver(shmob_drm_platform_driver);
MODULE_AUTHOR("Laurent Pinchart <laurent.pinchart@ideasonboard.com>");
MODULE_DESCRIPTION("Renesas SH Mobile DRM Driver");
MODULE_LICENSE("GPL");