linux/arch/s390/include/asm/pai.h

83 lines
2 KiB
C
Raw Permalink Normal View History

s390/pai: add support for cryptography counters PMU device driver perf_pai_crypto supports Processor Activity Instrumentation (PAI), available with IBM z16: - maps a full page to lowcore address 0x1500. - uses CR0 bit 13 to turn PAI crypto counting on and off. - creates a sample with raw data on each context switch out when at context switch some mapped counters have a value of nonzero. This device driver only supports CPU wide context, no task context is allowed. Support for counting: - one or more counters can be specified using perf stat -e pai_crypto/xxx/ where xxx stands for the counter event name. Multiple invocation of this command is possible. The counter names are listed in /sys/devices/pai_crypto/events directory. - one special counters can be specified using perf stat -e pai_crypto/CRYPTO_ALL/ which returns the sum of all incremented crypto counters. - one event pai_crypto/CRYPTO_ALL/ is reserved for sampling. No multiple invocations are possible. The event collects data at context switch out and saves them in the ring buffer. Add qpaci assembly instruction to query supported memory mapped crypto counters. It returns the number of counters (no holes allowed in that range). The PAI crypto counter events are system wide and can not be executed in parallel. Therefore some restrictions documented in function paicrypt_busy apply. In particular event CRYPTO_ALL for sampling must run exclusive. Only counting events can run in parallel. PAI crypto counter events can not be created when a CPU hot plug add is processed. This means a CPU hot plug add does not get the necessary PAI event to record PAI cryptography counter increments on the newly added CPU. CPU hot plug remove removes the event and terminates the counting of PAI counters immediately. Co-developed-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Reviewed-by: Juergen Christ <jchrist@linux.ibm.com> Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Link: https://lore.kernel.org/r/20220504062351.2954280-3-tmricht@linux.ibm.com Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2022-05-04 08:23:51 +02:00
/* SPDX-License-Identifier: GPL-2.0 */
/*
* Processor Activity Instrumentation support for cryptography counters
*
* Copyright IBM Corp. 2022
* Author(s): Thomas Richter <tmricht@linux.ibm.com>
*/
#ifndef _ASM_S390_PAI_H
#define _ASM_S390_PAI_H
#include <linux/jump_label.h>
#include <asm/lowcore.h>
#include <asm/ptrace.h>
#include <asm/asm.h>
s390/pai: add support for cryptography counters PMU device driver perf_pai_crypto supports Processor Activity Instrumentation (PAI), available with IBM z16: - maps a full page to lowcore address 0x1500. - uses CR0 bit 13 to turn PAI crypto counting on and off. - creates a sample with raw data on each context switch out when at context switch some mapped counters have a value of nonzero. This device driver only supports CPU wide context, no task context is allowed. Support for counting: - one or more counters can be specified using perf stat -e pai_crypto/xxx/ where xxx stands for the counter event name. Multiple invocation of this command is possible. The counter names are listed in /sys/devices/pai_crypto/events directory. - one special counters can be specified using perf stat -e pai_crypto/CRYPTO_ALL/ which returns the sum of all incremented crypto counters. - one event pai_crypto/CRYPTO_ALL/ is reserved for sampling. No multiple invocations are possible. The event collects data at context switch out and saves them in the ring buffer. Add qpaci assembly instruction to query supported memory mapped crypto counters. It returns the number of counters (no holes allowed in that range). The PAI crypto counter events are system wide and can not be executed in parallel. Therefore some restrictions documented in function paicrypt_busy apply. In particular event CRYPTO_ALL for sampling must run exclusive. Only counting events can run in parallel. PAI crypto counter events can not be created when a CPU hot plug add is processed. This means a CPU hot plug add does not get the necessary PAI event to record PAI cryptography counter increments on the newly added CPU. CPU hot plug remove removes the event and terminates the counting of PAI counters immediately. Co-developed-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Reviewed-by: Juergen Christ <jchrist@linux.ibm.com> Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Link: https://lore.kernel.org/r/20220504062351.2954280-3-tmricht@linux.ibm.com Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2022-05-04 08:23:51 +02:00
struct qpaci_info_block {
u64 header;
struct {
u64 : 8;
u64 num_cc : 8; /* # of supported crypto counters */
s390/pai: Add support for PAI Extension 1 NNPA counters PMU device driver perf_paiext supports Processor Activity Instrumentation Extension (PAIE1), available with IBM z16: - maps a 512 byte block to lowcore address 0x1508 called PAIE1 control block. - maps a 1024 byte block at PAIE1 control block entry with index 2. - uses control register bit 14 to enable PAIE1 control block lookup. - turn PAIE1 nnpa counting on and off by setting bit 63 in PAIE1 control block entry with index 2. - creates a sample with raw data on each context switch out when at context switch some mapped counters have a value of nonzero. This device driver only supports CPU wide context, no task context is allowed. Support for counting: - one or more counters can be specified using perf stat -e pai_ext/xxx/ where xxx stands for the counter event name. Multiple invocation of this command is possible. The counter names are listed in /sys/devices/pai_ext/events directory. - one special counters can be specified using perf stat -e pai_ext/NNPA_ALL/ which returns the sum of all incremented nnpa counters. - multiple counting events can run in parallel. Support for Sampling: - one event pai_ext/NNPA_ALL/ is reserved for sampling. The event collects data at context switch out and saves them in the ring buffer. - no multiple invocations are possible. The PAIE1 nnpa counter events are system wide. No task context is supported. Therefore some restrictions documented in function paiext_busy() apply. Extend qpaci assembly instruction to query supported memory mapped nnpa counters. It returns the number of counters (no holes allowed in that range). PAIE1 nnpa counter events can not be created when a CPU hot plug add is processed. This means a CPU hot plug add does not get the necessary PAIE1 event to record PAIE1 nnpa counter increments on the newly added CPU. CPU hot plug remove removes the event and terminates the counting of PAIE1 counters immediately. Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Reviewed-by: Sumanth Korikkar <sumanthk@linux.ibm.com> Reviewed-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-06-30 11:53:48 +02:00
u64 : 9;
u64 num_nnpa : 7; /* # of supported NNPA counters */
u64 : 32;
s390/pai: add support for cryptography counters PMU device driver perf_pai_crypto supports Processor Activity Instrumentation (PAI), available with IBM z16: - maps a full page to lowcore address 0x1500. - uses CR0 bit 13 to turn PAI crypto counting on and off. - creates a sample with raw data on each context switch out when at context switch some mapped counters have a value of nonzero. This device driver only supports CPU wide context, no task context is allowed. Support for counting: - one or more counters can be specified using perf stat -e pai_crypto/xxx/ where xxx stands for the counter event name. Multiple invocation of this command is possible. The counter names are listed in /sys/devices/pai_crypto/events directory. - one special counters can be specified using perf stat -e pai_crypto/CRYPTO_ALL/ which returns the sum of all incremented crypto counters. - one event pai_crypto/CRYPTO_ALL/ is reserved for sampling. No multiple invocations are possible. The event collects data at context switch out and saves them in the ring buffer. Add qpaci assembly instruction to query supported memory mapped crypto counters. It returns the number of counters (no holes allowed in that range). The PAI crypto counter events are system wide and can not be executed in parallel. Therefore some restrictions documented in function paicrypt_busy apply. In particular event CRYPTO_ALL for sampling must run exclusive. Only counting events can run in parallel. PAI crypto counter events can not be created when a CPU hot plug add is processed. This means a CPU hot plug add does not get the necessary PAI event to record PAI cryptography counter increments on the newly added CPU. CPU hot plug remove removes the event and terminates the counting of PAI counters immediately. Co-developed-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Reviewed-by: Juergen Christ <jchrist@linux.ibm.com> Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Link: https://lore.kernel.org/r/20220504062351.2954280-3-tmricht@linux.ibm.com Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2022-05-04 08:23:51 +02:00
};
};
static inline int qpaci(struct qpaci_info_block *info)
{
/* Size of info (in double words minus one) */
size_t size = sizeof(*info) / sizeof(u64) - 1;
int cc;
asm volatile(
" lgr 0,%[size]\n"
" .insn s,0xb28f0000,%[info]\n"
" lgr %[size],0\n"
CC_IPM(cc)
: CC_OUT(cc, cc), [info] "=Q" (*info), [size] "+&d" (size)
s390/pai: add support for cryptography counters PMU device driver perf_pai_crypto supports Processor Activity Instrumentation (PAI), available with IBM z16: - maps a full page to lowcore address 0x1500. - uses CR0 bit 13 to turn PAI crypto counting on and off. - creates a sample with raw data on each context switch out when at context switch some mapped counters have a value of nonzero. This device driver only supports CPU wide context, no task context is allowed. Support for counting: - one or more counters can be specified using perf stat -e pai_crypto/xxx/ where xxx stands for the counter event name. Multiple invocation of this command is possible. The counter names are listed in /sys/devices/pai_crypto/events directory. - one special counters can be specified using perf stat -e pai_crypto/CRYPTO_ALL/ which returns the sum of all incremented crypto counters. - one event pai_crypto/CRYPTO_ALL/ is reserved for sampling. No multiple invocations are possible. The event collects data at context switch out and saves them in the ring buffer. Add qpaci assembly instruction to query supported memory mapped crypto counters. It returns the number of counters (no holes allowed in that range). The PAI crypto counter events are system wide and can not be executed in parallel. Therefore some restrictions documented in function paicrypt_busy apply. In particular event CRYPTO_ALL for sampling must run exclusive. Only counting events can run in parallel. PAI crypto counter events can not be created when a CPU hot plug add is processed. This means a CPU hot plug add does not get the necessary PAI event to record PAI cryptography counter increments on the newly added CPU. CPU hot plug remove removes the event and terminates the counting of PAI counters immediately. Co-developed-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Reviewed-by: Juergen Christ <jchrist@linux.ibm.com> Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Link: https://lore.kernel.org/r/20220504062351.2954280-3-tmricht@linux.ibm.com Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2022-05-04 08:23:51 +02:00
:
: CC_CLOBBER_LIST("0", "memory"));
return CC_TRANSFORM(cc) ? (size + 1) * sizeof(u64) : 0;
s390/pai: add support for cryptography counters PMU device driver perf_pai_crypto supports Processor Activity Instrumentation (PAI), available with IBM z16: - maps a full page to lowcore address 0x1500. - uses CR0 bit 13 to turn PAI crypto counting on and off. - creates a sample with raw data on each context switch out when at context switch some mapped counters have a value of nonzero. This device driver only supports CPU wide context, no task context is allowed. Support for counting: - one or more counters can be specified using perf stat -e pai_crypto/xxx/ where xxx stands for the counter event name. Multiple invocation of this command is possible. The counter names are listed in /sys/devices/pai_crypto/events directory. - one special counters can be specified using perf stat -e pai_crypto/CRYPTO_ALL/ which returns the sum of all incremented crypto counters. - one event pai_crypto/CRYPTO_ALL/ is reserved for sampling. No multiple invocations are possible. The event collects data at context switch out and saves them in the ring buffer. Add qpaci assembly instruction to query supported memory mapped crypto counters. It returns the number of counters (no holes allowed in that range). The PAI crypto counter events are system wide and can not be executed in parallel. Therefore some restrictions documented in function paicrypt_busy apply. In particular event CRYPTO_ALL for sampling must run exclusive. Only counting events can run in parallel. PAI crypto counter events can not be created when a CPU hot plug add is processed. This means a CPU hot plug add does not get the necessary PAI event to record PAI cryptography counter increments on the newly added CPU. CPU hot plug remove removes the event and terminates the counting of PAI counters immediately. Co-developed-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Reviewed-by: Juergen Christ <jchrist@linux.ibm.com> Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Link: https://lore.kernel.org/r/20220504062351.2954280-3-tmricht@linux.ibm.com Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2022-05-04 08:23:51 +02:00
}
#define PAI_CRYPTO_BASE 0x1000 /* First event number */
#define PAI_CRYPTO_MAXCTR 256 /* Max # of event counters */
#define PAI_CRYPTO_KERNEL_OFFSET 2048
s390/pai: Add support for PAI Extension 1 NNPA counters PMU device driver perf_paiext supports Processor Activity Instrumentation Extension (PAIE1), available with IBM z16: - maps a 512 byte block to lowcore address 0x1508 called PAIE1 control block. - maps a 1024 byte block at PAIE1 control block entry with index 2. - uses control register bit 14 to enable PAIE1 control block lookup. - turn PAIE1 nnpa counting on and off by setting bit 63 in PAIE1 control block entry with index 2. - creates a sample with raw data on each context switch out when at context switch some mapped counters have a value of nonzero. This device driver only supports CPU wide context, no task context is allowed. Support for counting: - one or more counters can be specified using perf stat -e pai_ext/xxx/ where xxx stands for the counter event name. Multiple invocation of this command is possible. The counter names are listed in /sys/devices/pai_ext/events directory. - one special counters can be specified using perf stat -e pai_ext/NNPA_ALL/ which returns the sum of all incremented nnpa counters. - multiple counting events can run in parallel. Support for Sampling: - one event pai_ext/NNPA_ALL/ is reserved for sampling. The event collects data at context switch out and saves them in the ring buffer. - no multiple invocations are possible. The PAIE1 nnpa counter events are system wide. No task context is supported. Therefore some restrictions documented in function paiext_busy() apply. Extend qpaci assembly instruction to query supported memory mapped nnpa counters. It returns the number of counters (no holes allowed in that range). PAIE1 nnpa counter events can not be created when a CPU hot plug add is processed. This means a CPU hot plug add does not get the necessary PAIE1 event to record PAIE1 nnpa counter increments on the newly added CPU. CPU hot plug remove removes the event and terminates the counting of PAIE1 counters immediately. Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Reviewed-by: Sumanth Korikkar <sumanthk@linux.ibm.com> Reviewed-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-06-30 11:53:48 +02:00
#define PAI_NNPA_BASE 0x1800 /* First event number */
#define PAI_NNPA_MAXCTR 128 /* Max # of event counters */
s390/pai: add support for cryptography counters PMU device driver perf_pai_crypto supports Processor Activity Instrumentation (PAI), available with IBM z16: - maps a full page to lowcore address 0x1500. - uses CR0 bit 13 to turn PAI crypto counting on and off. - creates a sample with raw data on each context switch out when at context switch some mapped counters have a value of nonzero. This device driver only supports CPU wide context, no task context is allowed. Support for counting: - one or more counters can be specified using perf stat -e pai_crypto/xxx/ where xxx stands for the counter event name. Multiple invocation of this command is possible. The counter names are listed in /sys/devices/pai_crypto/events directory. - one special counters can be specified using perf stat -e pai_crypto/CRYPTO_ALL/ which returns the sum of all incremented crypto counters. - one event pai_crypto/CRYPTO_ALL/ is reserved for sampling. No multiple invocations are possible. The event collects data at context switch out and saves them in the ring buffer. Add qpaci assembly instruction to query supported memory mapped crypto counters. It returns the number of counters (no holes allowed in that range). The PAI crypto counter events are system wide and can not be executed in parallel. Therefore some restrictions documented in function paicrypt_busy apply. In particular event CRYPTO_ALL for sampling must run exclusive. Only counting events can run in parallel. PAI crypto counter events can not be created when a CPU hot plug add is processed. This means a CPU hot plug add does not get the necessary PAI event to record PAI cryptography counter increments on the newly added CPU. CPU hot plug remove removes the event and terminates the counting of PAI counters immediately. Co-developed-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Reviewed-by: Juergen Christ <jchrist@linux.ibm.com> Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Link: https://lore.kernel.org/r/20220504062351.2954280-3-tmricht@linux.ibm.com Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2022-05-04 08:23:51 +02:00
DECLARE_STATIC_KEY_FALSE(pai_key);
static __always_inline void pai_kernel_enter(struct pt_regs *regs)
{
if (!IS_ENABLED(CONFIG_PERF_EVENTS))
return;
if (!static_branch_unlikely(&pai_key))
return;
if (!get_lowcore()->ccd)
s390/pai: add support for cryptography counters PMU device driver perf_pai_crypto supports Processor Activity Instrumentation (PAI), available with IBM z16: - maps a full page to lowcore address 0x1500. - uses CR0 bit 13 to turn PAI crypto counting on and off. - creates a sample with raw data on each context switch out when at context switch some mapped counters have a value of nonzero. This device driver only supports CPU wide context, no task context is allowed. Support for counting: - one or more counters can be specified using perf stat -e pai_crypto/xxx/ where xxx stands for the counter event name. Multiple invocation of this command is possible. The counter names are listed in /sys/devices/pai_crypto/events directory. - one special counters can be specified using perf stat -e pai_crypto/CRYPTO_ALL/ which returns the sum of all incremented crypto counters. - one event pai_crypto/CRYPTO_ALL/ is reserved for sampling. No multiple invocations are possible. The event collects data at context switch out and saves them in the ring buffer. Add qpaci assembly instruction to query supported memory mapped crypto counters. It returns the number of counters (no holes allowed in that range). The PAI crypto counter events are system wide and can not be executed in parallel. Therefore some restrictions documented in function paicrypt_busy apply. In particular event CRYPTO_ALL for sampling must run exclusive. Only counting events can run in parallel. PAI crypto counter events can not be created when a CPU hot plug add is processed. This means a CPU hot plug add does not get the necessary PAI event to record PAI cryptography counter increments on the newly added CPU. CPU hot plug remove removes the event and terminates the counting of PAI counters immediately. Co-developed-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Reviewed-by: Juergen Christ <jchrist@linux.ibm.com> Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Link: https://lore.kernel.org/r/20220504062351.2954280-3-tmricht@linux.ibm.com Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2022-05-04 08:23:51 +02:00
return;
if (!user_mode(regs))
return;
WRITE_ONCE(get_lowcore()->ccd, get_lowcore()->ccd | PAI_CRYPTO_KERNEL_OFFSET);
s390/pai: add support for cryptography counters PMU device driver perf_pai_crypto supports Processor Activity Instrumentation (PAI), available with IBM z16: - maps a full page to lowcore address 0x1500. - uses CR0 bit 13 to turn PAI crypto counting on and off. - creates a sample with raw data on each context switch out when at context switch some mapped counters have a value of nonzero. This device driver only supports CPU wide context, no task context is allowed. Support for counting: - one or more counters can be specified using perf stat -e pai_crypto/xxx/ where xxx stands for the counter event name. Multiple invocation of this command is possible. The counter names are listed in /sys/devices/pai_crypto/events directory. - one special counters can be specified using perf stat -e pai_crypto/CRYPTO_ALL/ which returns the sum of all incremented crypto counters. - one event pai_crypto/CRYPTO_ALL/ is reserved for sampling. No multiple invocations are possible. The event collects data at context switch out and saves them in the ring buffer. Add qpaci assembly instruction to query supported memory mapped crypto counters. It returns the number of counters (no holes allowed in that range). The PAI crypto counter events are system wide and can not be executed in parallel. Therefore some restrictions documented in function paicrypt_busy apply. In particular event CRYPTO_ALL for sampling must run exclusive. Only counting events can run in parallel. PAI crypto counter events can not be created when a CPU hot plug add is processed. This means a CPU hot plug add does not get the necessary PAI event to record PAI cryptography counter increments on the newly added CPU. CPU hot plug remove removes the event and terminates the counting of PAI counters immediately. Co-developed-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Reviewed-by: Juergen Christ <jchrist@linux.ibm.com> Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Link: https://lore.kernel.org/r/20220504062351.2954280-3-tmricht@linux.ibm.com Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2022-05-04 08:23:51 +02:00
}
static __always_inline void pai_kernel_exit(struct pt_regs *regs)
{
if (!IS_ENABLED(CONFIG_PERF_EVENTS))
return;
if (!static_branch_unlikely(&pai_key))
return;
if (!get_lowcore()->ccd)
s390/pai: add support for cryptography counters PMU device driver perf_pai_crypto supports Processor Activity Instrumentation (PAI), available with IBM z16: - maps a full page to lowcore address 0x1500. - uses CR0 bit 13 to turn PAI crypto counting on and off. - creates a sample with raw data on each context switch out when at context switch some mapped counters have a value of nonzero. This device driver only supports CPU wide context, no task context is allowed. Support for counting: - one or more counters can be specified using perf stat -e pai_crypto/xxx/ where xxx stands for the counter event name. Multiple invocation of this command is possible. The counter names are listed in /sys/devices/pai_crypto/events directory. - one special counters can be specified using perf stat -e pai_crypto/CRYPTO_ALL/ which returns the sum of all incremented crypto counters. - one event pai_crypto/CRYPTO_ALL/ is reserved for sampling. No multiple invocations are possible. The event collects data at context switch out and saves them in the ring buffer. Add qpaci assembly instruction to query supported memory mapped crypto counters. It returns the number of counters (no holes allowed in that range). The PAI crypto counter events are system wide and can not be executed in parallel. Therefore some restrictions documented in function paicrypt_busy apply. In particular event CRYPTO_ALL for sampling must run exclusive. Only counting events can run in parallel. PAI crypto counter events can not be created when a CPU hot plug add is processed. This means a CPU hot plug add does not get the necessary PAI event to record PAI cryptography counter increments on the newly added CPU. CPU hot plug remove removes the event and terminates the counting of PAI counters immediately. Co-developed-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Reviewed-by: Juergen Christ <jchrist@linux.ibm.com> Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Link: https://lore.kernel.org/r/20220504062351.2954280-3-tmricht@linux.ibm.com Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2022-05-04 08:23:51 +02:00
return;
if (!user_mode(regs))
return;
WRITE_ONCE(get_lowcore()->ccd, get_lowcore()->ccd & ~PAI_CRYPTO_KERNEL_OFFSET);
s390/pai: add support for cryptography counters PMU device driver perf_pai_crypto supports Processor Activity Instrumentation (PAI), available with IBM z16: - maps a full page to lowcore address 0x1500. - uses CR0 bit 13 to turn PAI crypto counting on and off. - creates a sample with raw data on each context switch out when at context switch some mapped counters have a value of nonzero. This device driver only supports CPU wide context, no task context is allowed. Support for counting: - one or more counters can be specified using perf stat -e pai_crypto/xxx/ where xxx stands for the counter event name. Multiple invocation of this command is possible. The counter names are listed in /sys/devices/pai_crypto/events directory. - one special counters can be specified using perf stat -e pai_crypto/CRYPTO_ALL/ which returns the sum of all incremented crypto counters. - one event pai_crypto/CRYPTO_ALL/ is reserved for sampling. No multiple invocations are possible. The event collects data at context switch out and saves them in the ring buffer. Add qpaci assembly instruction to query supported memory mapped crypto counters. It returns the number of counters (no holes allowed in that range). The PAI crypto counter events are system wide and can not be executed in parallel. Therefore some restrictions documented in function paicrypt_busy apply. In particular event CRYPTO_ALL for sampling must run exclusive. Only counting events can run in parallel. PAI crypto counter events can not be created when a CPU hot plug add is processed. This means a CPU hot plug add does not get the necessary PAI event to record PAI cryptography counter increments on the newly added CPU. CPU hot plug remove removes the event and terminates the counting of PAI counters immediately. Co-developed-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Reviewed-by: Juergen Christ <jchrist@linux.ibm.com> Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Link: https://lore.kernel.org/r/20220504062351.2954280-3-tmricht@linux.ibm.com Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2022-05-04 08:23:51 +02:00
}
#define PAI_SAVE_AREA(x) ((x)->hw.event_base)
#define PAI_CPU_MASK(x) ((x)->hw.addr_filters)
#define PAI_SWLIST(x) (&(x)->hw.tp_list)
s390/pai: add support for cryptography counters PMU device driver perf_pai_crypto supports Processor Activity Instrumentation (PAI), available with IBM z16: - maps a full page to lowcore address 0x1500. - uses CR0 bit 13 to turn PAI crypto counting on and off. - creates a sample with raw data on each context switch out when at context switch some mapped counters have a value of nonzero. This device driver only supports CPU wide context, no task context is allowed. Support for counting: - one or more counters can be specified using perf stat -e pai_crypto/xxx/ where xxx stands for the counter event name. Multiple invocation of this command is possible. The counter names are listed in /sys/devices/pai_crypto/events directory. - one special counters can be specified using perf stat -e pai_crypto/CRYPTO_ALL/ which returns the sum of all incremented crypto counters. - one event pai_crypto/CRYPTO_ALL/ is reserved for sampling. No multiple invocations are possible. The event collects data at context switch out and saves them in the ring buffer. Add qpaci assembly instruction to query supported memory mapped crypto counters. It returns the number of counters (no holes allowed in that range). The PAI crypto counter events are system wide and can not be executed in parallel. Therefore some restrictions documented in function paicrypt_busy apply. In particular event CRYPTO_ALL for sampling must run exclusive. Only counting events can run in parallel. PAI crypto counter events can not be created when a CPU hot plug add is processed. This means a CPU hot plug add does not get the necessary PAI event to record PAI cryptography counter increments on the newly added CPU. CPU hot plug remove removes the event and terminates the counting of PAI counters immediately. Co-developed-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Reviewed-by: Juergen Christ <jchrist@linux.ibm.com> Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Link: https://lore.kernel.org/r/20220504062351.2954280-3-tmricht@linux.ibm.com Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2022-05-04 08:23:51 +02:00
#endif