linux/arch/arm/boot/dts/ti/omap/omap4-panda-a4.dts

// SPDX-License-Identifier: GPL-2.0-only
/*
 * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
 */
/dts-v1/;

#include "omap443x.dtsi"
#include "omap4-panda-common.dtsi"

/ {
	model = "TI OMAP4 PandaBoard (A4)";
	compatible = "ti,omap4-panda-a4", "ti,omap4-panda", "ti,omap4430", "ti,omap4";
};

/* Pandaboard Rev A4+ have external pullups on SCL & SDA */
&dss_hdmi_pins {
	pinctrl-single,pins = <
		OMAP4_IOPAD(0x09a, PIN_INPUT | MUX_MODE0)		/* hdmi_cec.hdmi_cec */
		OMAP4_IOPAD(0x09c, PIN_INPUT | MUX_MODE0)		/* hdmi_scl.hdmi_scl */
		OMAP4_IOPAD(0x09e, PIN_INPUT | MUX_MODE0)		/* hdmi_sda.hdmi_sda */
		>;
};
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500 Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 2019-06-04 10:11:33 +02:00			`// SPDX-License-Identifier: GPL-2.0-only`
ARM: dts: omap4-panda: Add pinmux configuration for HDMI Add the pinmux configuration for HDMI and TPD12S015A. Configure the gpios for the TPD12S015A and SDA, SCL and CEC for HDMI. Signed-off-by: Ricardo Neri <ricardo.neri@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> 2012-11-05 15:14:14 +02:00			`/*`
Replace HTTP links with HTTPS ones: OMAP DEVICE TREE SUPPORT Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w\|/)`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de> Signed-off-by: Tony Lindgren <tony@atomide.com> 2020-07-08 11:34:51 +02:00			`* Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/`
ARM: dts: omap4-panda: Add pinmux configuration for HDMI Add the pinmux configuration for HDMI and TPD12S015A. Configure the gpios for the TPD12S015A and SDA, SCL and CEC for HDMI. Signed-off-by: Ricardo Neri <ricardo.neri@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> 2012-11-05 15:14:14 +02:00			`*/`
ARM: dts: omap4-panda: move generic sections to panda-common PandaBoard, PandaBoard-A4 revisions use OMAP4430. PandaBoard-ES version of the board uses OMAP4460. Move the original panda dts file into a common dtsi used by all panda variants. This allows us to introduce SoC variation for PandaBoard ES without impacting other PandaBoard versions that are supported. As part of this change, since OMAP4460 adds on to OMAP4430, add omap4.dtsi to omap4460.dtsi. Signed-off-by: Nishanth Menon <nm@ti.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Jon Hunter <jon-hunter@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Shawn Guo <shawn.guo@linaro.org> Cc: Keerthy <j-keerthy@ti.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org> 2013-03-19 12:53:07 -05:00			`/dts-v1/;`

ARM: dts: OMAP2+: Use #include for all device trees Replace /include/ by #include for OMAP2+ DT, in order to use the C pre-processor, making use of #define features possible. Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org> 2013-05-31 14:32:55 +02:00			`#include "omap443x.dtsi"`
			`#include "omap4-panda-common.dtsi"`
ARM: dts: omap4-panda: Add pinmux configuration for HDMI Add the pinmux configuration for HDMI and TPD12S015A. Configure the gpios for the TPD12S015A and SDA, SCL and CEC for HDMI. Signed-off-by: Ricardo Neri <ricardo.neri@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> 2012-11-05 15:14:14 +02:00
ARM: dts: omap4-panda-a4: Add missing model and compatible properties When moving the model and compatible properties out of the common Pandaboard files and in to the specific boards, the omap4-panda-a4 file wasn't updated as well and so has lacked a model and compatible entry ever since. Fixes: a1a57abaaf82 ("ARM: dts: omap4-panda: Fix model and SoC family details") Signed-off-by: Tom Rini <trini@konsulko.com> Link: https://lore.kernel.org/r/20250123174901.1182176-2-trini@konsulko.com Signed-off-by: Kevin Hilman <khilman@baylibre.com> 2025-01-23 11:49:01 -06:00			`/ {`
			`model = "TI OMAP4 PandaBoard (A4)";`
			`compatible = "ti,omap4-panda-a4", "ti,omap4-panda", "ti,omap4430", "ti,omap4";`
			`};`

ARM: dts: omap4-panda: Add pinmux configuration for HDMI Add the pinmux configuration for HDMI and TPD12S015A. Configure the gpios for the TPD12S015A and SDA, SCL and CEC for HDMI. Signed-off-by: Ricardo Neri <ricardo.neri@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> 2012-11-05 15:14:14 +02:00			`/* Pandaboard Rev A4+ have external pullups on SCL & SDA */`
			`&dss_hdmi_pins {`
			`pinctrl-single,pins = <`
ARM: dts: omap4: enable CEC pin for Pandaboard A4 and ES The CEC pin was always pulled up, making it impossible to use it. Change to PIN_INPUT so it can be used by the new CEC support. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com> 2017-05-16 08:10:07 -07:00			`OMAP4_IOPAD(0x09a, PIN_INPUT \| MUX_MODE0) /* hdmi_cec.hdmi_cec */`
ARM: dts: omap4-panda-a4: Use OMAP4_IOPAD pinmux macro Use the pinmux IOPAD macros to define the register as an offset from the padconf physical address instead of the offset from padconf base. This makes the DTS easier to read since matches the addresses listed in the Technical Reference Manual. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Tony Lindgren <tony@atomide.com> 2015-11-13 01:54:09 -03:00			`OMAP4_IOPAD(0x09c, PIN_INPUT \| MUX_MODE0) /* hdmi_scl.hdmi_scl */`
			`OMAP4_IOPAD(0x09e, PIN_INPUT \| MUX_MODE0) /* hdmi_sda.hdmi_sda */`
ARM: dts: omap4-panda: Add pinmux configuration for HDMI Add the pinmux configuration for HDMI and TPD12S015A. Configure the gpios for the TPD12S015A and SDA, SCL and CEC for HDMI. Signed-off-by: Ricardo Neri <ricardo.neri@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> 2012-11-05 15:14:14 +02:00			`>;`
			`};`