ARM: dts: qcom: Add SDX65 platform and MTP board support
Add basic devicetree support for SDX65 platform and MTP board from
Qualcomm. The SDX65 platform features an ARM Cortex A7 CPU which forms
the Application Processor Sub System (APSS) along with standard Qualcomm
peripherals like GCC, TLMM, BLSP, QPIC, and BAM etc... Also, there
exists the networking parts such as IPA, MHI, PCIE-EP, EMAC, and Modem
etc..
This commit adds basic devicetree support that includes GCC, RPMh clock, INTC
and Debug UART.
Signed-off-by: Vamsi Krishna Lanka <quic_vamslank@quicinc.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1635552125-16407-3-git-send-email-quic_vamslank@quicinc.com
2021-10-29 17:02:04 -07:00
|
|
|
// SPDX-License-Identifier: BSD-3-Clause
|
|
|
|
/*
|
|
|
|
* SDX65 SoC device tree source
|
|
|
|
*
|
|
|
|
* Copyright (c) 2021 Qualcomm Innovation Center, Inc. All rights reserved.
|
|
|
|
*
|
|
|
|
*/
|
|
|
|
|
|
|
|
#include <dt-bindings/clock/qcom,gcc-sdx65.h>
|
|
|
|
#include <dt-bindings/clock/qcom,rpmh.h>
|
2023-05-18 23:17:51 +05:30
|
|
|
#include <dt-bindings/gpio/gpio.h>
|
ARM: dts: qcom: Add SDX65 platform and MTP board support
Add basic devicetree support for SDX65 platform and MTP board from
Qualcomm. The SDX65 platform features an ARM Cortex A7 CPU which forms
the Application Processor Sub System (APSS) along with standard Qualcomm
peripherals like GCC, TLMM, BLSP, QPIC, and BAM etc... Also, there
exists the networking parts such as IPA, MHI, PCIE-EP, EMAC, and Modem
etc..
This commit adds basic devicetree support that includes GCC, RPMh clock, INTC
and Debug UART.
Signed-off-by: Vamsi Krishna Lanka <quic_vamslank@quicinc.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1635552125-16407-3-git-send-email-quic_vamslank@quicinc.com
2021-10-29 17:02:04 -07:00
|
|
|
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
2022-03-16 11:47:25 +05:30
|
|
|
#include <dt-bindings/power/qcom-rpmpd.h>
|
ARM: dts: qcom: Add SDX65 platform and MTP board support
Add basic devicetree support for SDX65 platform and MTP board from
Qualcomm. The SDX65 platform features an ARM Cortex A7 CPU which forms
the Application Processor Sub System (APSS) along with standard Qualcomm
peripherals like GCC, TLMM, BLSP, QPIC, and BAM etc... Also, there
exists the networking parts such as IPA, MHI, PCIE-EP, EMAC, and Modem
etc..
This commit adds basic devicetree support that includes GCC, RPMh clock, INTC
and Debug UART.
Signed-off-by: Vamsi Krishna Lanka <quic_vamslank@quicinc.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1635552125-16407-3-git-send-email-quic_vamslank@quicinc.com
2021-10-29 17:02:04 -07:00
|
|
|
#include <dt-bindings/soc/qcom,rpmh-rsc.h>
|
2023-03-27 14:56:04 -05:00
|
|
|
#include <dt-bindings/interconnect/qcom,sdx65.h>
|
ARM: dts: qcom: Add SDX65 platform and MTP board support
Add basic devicetree support for SDX65 platform and MTP board from
Qualcomm. The SDX65 platform features an ARM Cortex A7 CPU which forms
the Application Processor Sub System (APSS) along with standard Qualcomm
peripherals like GCC, TLMM, BLSP, QPIC, and BAM etc... Also, there
exists the networking parts such as IPA, MHI, PCIE-EP, EMAC, and Modem
etc..
This commit adds basic devicetree support that includes GCC, RPMh clock, INTC
and Debug UART.
Signed-off-by: Vamsi Krishna Lanka <quic_vamslank@quicinc.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1635552125-16407-3-git-send-email-quic_vamslank@quicinc.com
2021-10-29 17:02:04 -07:00
|
|
|
|
|
|
|
/ {
|
|
|
|
#address-cells = <1>;
|
|
|
|
#size-cells = <1>;
|
|
|
|
qcom,msm-id = <458 0x10000>, <483 0x10000>, <509 0x10000>;
|
|
|
|
interrupt-parent = <&intc>;
|
|
|
|
|
|
|
|
memory {
|
|
|
|
device_type = "memory";
|
|
|
|
reg = <0 0>;
|
|
|
|
};
|
|
|
|
|
|
|
|
clocks {
|
|
|
|
xo_board: xo-board {
|
|
|
|
compatible = "fixed-clock";
|
|
|
|
clock-frequency = <76800000>;
|
|
|
|
clock-output-names = "xo_board";
|
|
|
|
#clock-cells = <0>;
|
|
|
|
};
|
|
|
|
|
|
|
|
sleep_clk: sleep-clk {
|
|
|
|
compatible = "fixed-clock";
|
|
|
|
clock-frequency = <32764>;
|
|
|
|
clock-output-names = "sleep_clk";
|
|
|
|
#clock-cells = <0>;
|
|
|
|
};
|
2022-05-02 10:08:04 -07:00
|
|
|
|
|
|
|
nand_clk_dummy: nand-clk-dummy {
|
|
|
|
compatible = "fixed-clock";
|
|
|
|
clock-frequency = <32764>;
|
|
|
|
#clock-cells = <0>;
|
|
|
|
};
|
ARM: dts: qcom: Add SDX65 platform and MTP board support
Add basic devicetree support for SDX65 platform and MTP board from
Qualcomm. The SDX65 platform features an ARM Cortex A7 CPU which forms
the Application Processor Sub System (APSS) along with standard Qualcomm
peripherals like GCC, TLMM, BLSP, QPIC, and BAM etc... Also, there
exists the networking parts such as IPA, MHI, PCIE-EP, EMAC, and Modem
etc..
This commit adds basic devicetree support that includes GCC, RPMh clock, INTC
and Debug UART.
Signed-off-by: Vamsi Krishna Lanka <quic_vamslank@quicinc.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1635552125-16407-3-git-send-email-quic_vamslank@quicinc.com
2021-10-29 17:02:04 -07:00
|
|
|
};
|
|
|
|
|
|
|
|
cpus {
|
|
|
|
#address-cells = <1>;
|
|
|
|
#size-cells = <0>;
|
|
|
|
|
|
|
|
cpu0: cpu@0 {
|
|
|
|
device_type = "cpu";
|
|
|
|
compatible = "arm,cortex-a7";
|
|
|
|
reg = <0x0>;
|
|
|
|
enable-method = "psci";
|
2022-06-01 16:15:02 +05:30
|
|
|
clocks = <&apcs>;
|
|
|
|
power-domains = <&rpmhpd SDX65_CX_AO>;
|
2025-04-10 10:47:28 -05:00
|
|
|
power-domain-names = "perf";
|
2022-06-01 16:15:02 +05:30
|
|
|
operating-points-v2 = <&cpu_opp_table>;
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
2023-01-09 12:22:18 +01:00
|
|
|
firmware {
|
|
|
|
scm {
|
|
|
|
compatible = "qcom,scm-sdx65", "qcom,scm";
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
|
|
|
mc_virt: interconnect-mc-virt {
|
|
|
|
compatible = "qcom,sdx65-mc-virt";
|
|
|
|
#interconnect-cells = <1>;
|
|
|
|
qcom,bcm-voters = <&apps_bcm_voter>;
|
|
|
|
};
|
|
|
|
|
|
|
|
cpu_opp_table: opp-table-cpu {
|
2022-06-01 16:15:02 +05:30
|
|
|
compatible = "operating-points-v2";
|
|
|
|
opp-shared;
|
|
|
|
|
|
|
|
opp-345600000 {
|
|
|
|
opp-hz = /bits/ 64 <345600000>;
|
|
|
|
required-opps = <&rpmhpd_opp_low_svs>;
|
|
|
|
};
|
|
|
|
|
|
|
|
opp-576000000 {
|
|
|
|
opp-hz = /bits/ 64 <576000000>;
|
|
|
|
required-opps = <&rpmhpd_opp_svs>;
|
|
|
|
};
|
|
|
|
|
|
|
|
opp-1094400000 {
|
|
|
|
opp-hz = /bits/ 64 <1094400000>;
|
|
|
|
required-opps = <&rpmhpd_opp_nom>;
|
|
|
|
};
|
|
|
|
|
|
|
|
opp-1497600000 {
|
|
|
|
opp-hz = /bits/ 64 <1497600000>;
|
|
|
|
required-opps = <&rpmhpd_opp_turbo>;
|
ARM: dts: qcom: Add SDX65 platform and MTP board support
Add basic devicetree support for SDX65 platform and MTP board from
Qualcomm. The SDX65 platform features an ARM Cortex A7 CPU which forms
the Application Processor Sub System (APSS) along with standard Qualcomm
peripherals like GCC, TLMM, BLSP, QPIC, and BAM etc... Also, there
exists the networking parts such as IPA, MHI, PCIE-EP, EMAC, and Modem
etc..
This commit adds basic devicetree support that includes GCC, RPMh clock, INTC
and Debug UART.
Signed-off-by: Vamsi Krishna Lanka <quic_vamslank@quicinc.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1635552125-16407-3-git-send-email-quic_vamslank@quicinc.com
2021-10-29 17:02:04 -07:00
|
|
|
};
|
|
|
|
};
|
|
|
|
|
|
|
|
psci {
|
|
|
|
compatible = "arm,psci-1.0";
|
|
|
|
method = "smc";
|
|
|
|
};
|
|
|
|
|
|
|
|
reserved_memory: reserved-memory {
|
|
|
|
#address-cells = <1>;
|
|
|
|
#size-cells = <1>;
|
|
|
|
ranges;
|
|
|
|
|
2022-04-11 15:20:09 +05:30
|
|
|
tz_heap_mem: memory@8fcad000 {
|
|
|
|
no-map;
|
|
|
|
reg = <0x8fcad000 0x40000>;
|
|
|
|
};
|
|
|
|
|
|
|
|
secdata_mem: memory@8fcfd000 {
|
|
|
|
no-map;
|
|
|
|
reg = <0x8fcfd000 0x1000>;
|
|
|
|
};
|
|
|
|
|
|
|
|
hyp_mem: memory@8fd00000 {
|
|
|
|
no-map;
|
|
|
|
reg = <0x8fd00000 0x80000>;
|
|
|
|
};
|
|
|
|
|
|
|
|
access_control_mem: memory@8fd80000 {
|
|
|
|
no-map;
|
|
|
|
reg = <0x8fd80000 0x80000>;
|
|
|
|
};
|
|
|
|
|
|
|
|
aop_mem: memory@8fe00000 {
|
|
|
|
no-map;
|
|
|
|
reg = <0x8fe00000 0x20000>;
|
|
|
|
};
|
|
|
|
|
|
|
|
smem_mem: memory@8fe20000 {
|
2022-05-02 14:07:45 +05:30
|
|
|
compatible = "qcom,smem";
|
2022-04-11 15:20:09 +05:30
|
|
|
reg = <0x8fe20000 0xc0000>;
|
2022-05-02 14:07:45 +05:30
|
|
|
hwlocks = <&tcsr_mutex 3>;
|
|
|
|
no-map;
|
2022-04-11 15:20:09 +05:30
|
|
|
};
|
|
|
|
|
ARM: dts: qcom: Add SDX65 platform and MTP board support
Add basic devicetree support for SDX65 platform and MTP board from
Qualcomm. The SDX65 platform features an ARM Cortex A7 CPU which forms
the Application Processor Sub System (APSS) along with standard Qualcomm
peripherals like GCC, TLMM, BLSP, QPIC, and BAM etc... Also, there
exists the networking parts such as IPA, MHI, PCIE-EP, EMAC, and Modem
etc..
This commit adds basic devicetree support that includes GCC, RPMh clock, INTC
and Debug UART.
Signed-off-by: Vamsi Krishna Lanka <quic_vamslank@quicinc.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1635552125-16407-3-git-send-email-quic_vamslank@quicinc.com
2021-10-29 17:02:04 -07:00
|
|
|
cmd_db: reserved-memory@8fee0000 {
|
|
|
|
compatible = "qcom,cmd-db";
|
|
|
|
reg = <0x8fee0000 0x20000>;
|
|
|
|
no-map;
|
|
|
|
};
|
2022-04-11 15:20:09 +05:30
|
|
|
|
|
|
|
tz_mem: memory@8ff00000 {
|
|
|
|
no-map;
|
|
|
|
reg = <0x8ff00000 0x100000>;
|
|
|
|
};
|
|
|
|
|
|
|
|
tz_apps_mem: memory@90000000 {
|
|
|
|
no-map;
|
|
|
|
reg = <0x90000000 0x500000>;
|
|
|
|
};
|
|
|
|
|
|
|
|
llcc_tcm_mem: memory@15800000 {
|
|
|
|
no-map;
|
|
|
|
reg = <0x15800000 0x800000>;
|
|
|
|
};
|
ARM: dts: qcom: Add SDX65 platform and MTP board support
Add basic devicetree support for SDX65 platform and MTP board from
Qualcomm. The SDX65 platform features an ARM Cortex A7 CPU which forms
the Application Processor Sub System (APSS) along with standard Qualcomm
peripherals like GCC, TLMM, BLSP, QPIC, and BAM etc... Also, there
exists the networking parts such as IPA, MHI, PCIE-EP, EMAC, and Modem
etc..
This commit adds basic devicetree support that includes GCC, RPMh clock, INTC
and Debug UART.
Signed-off-by: Vamsi Krishna Lanka <quic_vamslank@quicinc.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1635552125-16407-3-git-send-email-quic_vamslank@quicinc.com
2021-10-29 17:02:04 -07:00
|
|
|
};
|
|
|
|
|
2022-06-01 16:15:03 +05:30
|
|
|
smp2p-mpss {
|
|
|
|
compatible = "qcom,smp2p";
|
|
|
|
qcom,smem = <435>, <428>;
|
|
|
|
interrupts = <GIC_SPI 113 IRQ_TYPE_EDGE_RISING>;
|
|
|
|
mboxes = <&apcs 14>;
|
|
|
|
qcom,local-pid = <0>;
|
|
|
|
qcom,remote-pid = <1>;
|
|
|
|
|
|
|
|
modem_smp2p_out: master-kernel {
|
|
|
|
qcom,entry-name = "master-kernel";
|
|
|
|
#qcom,smem-state-cells = <1>;
|
|
|
|
};
|
|
|
|
|
|
|
|
modem_smp2p_in: slave-kernel {
|
|
|
|
qcom,entry-name = "slave-kernel";
|
|
|
|
interrupt-controller;
|
|
|
|
#interrupt-cells = <2>;
|
|
|
|
};
|
|
|
|
|
|
|
|
ipa_smp2p_out: ipa-ap-to-modem {
|
|
|
|
qcom,entry-name = "ipa";
|
|
|
|
#qcom,smem-state-cells = <1>;
|
|
|
|
};
|
|
|
|
|
|
|
|
ipa_smp2p_in: ipa-modem-to-ap {
|
|
|
|
qcom,entry-name = "ipa";
|
|
|
|
interrupt-controller;
|
|
|
|
#interrupt-cells = <2>;
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
ARM: dts: qcom: Add SDX65 platform and MTP board support
Add basic devicetree support for SDX65 platform and MTP board from
Qualcomm. The SDX65 platform features an ARM Cortex A7 CPU which forms
the Application Processor Sub System (APSS) along with standard Qualcomm
peripherals like GCC, TLMM, BLSP, QPIC, and BAM etc... Also, there
exists the networking parts such as IPA, MHI, PCIE-EP, EMAC, and Modem
etc..
This commit adds basic devicetree support that includes GCC, RPMh clock, INTC
and Debug UART.
Signed-off-by: Vamsi Krishna Lanka <quic_vamslank@quicinc.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1635552125-16407-3-git-send-email-quic_vamslank@quicinc.com
2021-10-29 17:02:04 -07:00
|
|
|
soc: soc {
|
|
|
|
#address-cells = <1>;
|
|
|
|
#size-cells = <1>;
|
|
|
|
ranges;
|
|
|
|
compatible = "simple-bus";
|
|
|
|
|
|
|
|
gcc: clock-controller@100000 {
|
|
|
|
compatible = "qcom,gcc-sdx65";
|
|
|
|
reg = <0x00100000 0x001f7400>;
|
2023-09-24 20:31:02 +02:00
|
|
|
clocks = <&rpmhcc RPMH_CXO_CLK>,
|
|
|
|
<&rpmhcc RPMH_CXO_CLK_A>,
|
|
|
|
<&sleep_clk>,
|
|
|
|
<&pcie_phy>,
|
|
|
|
<0>;
|
|
|
|
clock-names = "bi_tcxo",
|
|
|
|
"bi_tcxo_ao",
|
|
|
|
"sleep_clk",
|
|
|
|
"pcie_pipe_clk",
|
|
|
|
"usb3_phy_wrapper_gcc_usb30_pipe_clk";
|
2022-05-02 14:36:34 +05:30
|
|
|
#power-domain-cells = <1>;
|
ARM: dts: qcom: Add SDX65 platform and MTP board support
Add basic devicetree support for SDX65 platform and MTP board from
Qualcomm. The SDX65 platform features an ARM Cortex A7 CPU which forms
the Application Processor Sub System (APSS) along with standard Qualcomm
peripherals like GCC, TLMM, BLSP, QPIC, and BAM etc... Also, there
exists the networking parts such as IPA, MHI, PCIE-EP, EMAC, and Modem
etc..
This commit adds basic devicetree support that includes GCC, RPMh clock, INTC
and Debug UART.
Signed-off-by: Vamsi Krishna Lanka <quic_vamslank@quicinc.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1635552125-16407-3-git-send-email-quic_vamslank@quicinc.com
2021-10-29 17:02:04 -07:00
|
|
|
#clock-cells = <1>;
|
|
|
|
#reset-cells = <1>;
|
|
|
|
};
|
|
|
|
|
|
|
|
blsp1_uart3: serial@831000 {
|
|
|
|
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
|
|
|
|
reg = <0x00831000 0x200>;
|
|
|
|
interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
|
clocks = <&gcc GCC_BLSP1_UART3_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
|
|
|
|
clock-names = "core", "iface";
|
|
|
|
status = "disabled";
|
|
|
|
};
|
|
|
|
|
2022-05-02 14:36:34 +05:30
|
|
|
usb_hsphy: phy@ff4000 {
|
2022-12-23 17:18:34 +01:00
|
|
|
compatible = "qcom,sdx65-usb-hs-phy",
|
|
|
|
"qcom,usb-snps-hs-7nm-phy";
|
2022-05-02 14:36:34 +05:30
|
|
|
reg = <0xff4000 0x120>;
|
|
|
|
#phy-cells = <0>;
|
|
|
|
clocks = <&rpmhcc RPMH_CXO_CLK>;
|
|
|
|
clock-names = "ref";
|
|
|
|
resets = <&gcc GCC_QUSB2PHY_BCR>;
|
2023-03-27 14:56:05 -05:00
|
|
|
status = "disabled";
|
2022-05-02 14:36:34 +05:30
|
|
|
};
|
|
|
|
|
|
|
|
usb_qmpphy: phy@ff6000 {
|
|
|
|
compatible = "qcom,sdx65-qmp-usb3-uni-phy";
|
2023-08-25 00:19:52 +03:00
|
|
|
reg = <0x00ff6000 0x2000>;
|
2022-05-02 14:36:34 +05:30
|
|
|
|
|
|
|
clocks = <&gcc GCC_USB3_PHY_AUX_CLK>,
|
2023-08-25 00:19:52 +03:00
|
|
|
<&gcc GCC_USB3_PRIM_CLKREF_EN>,
|
2022-05-02 14:36:34 +05:30
|
|
|
<&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
|
2023-08-25 00:19:52 +03:00
|
|
|
<&gcc GCC_USB3_PHY_PIPE_CLK>;
|
|
|
|
clock-names = "aux",
|
|
|
|
"ref",
|
|
|
|
"cfg_ahb",
|
|
|
|
"pipe";
|
|
|
|
clock-output-names = "usb3_uni_phy_pipe_clk_src";
|
|
|
|
#clock-cells = <0>;
|
|
|
|
#phy-cells = <0>;
|
2022-05-02 14:36:34 +05:30
|
|
|
|
2023-08-25 00:19:52 +03:00
|
|
|
resets = <&gcc GCC_USB3_PHY_BCR>,
|
|
|
|
<&gcc GCC_USB3PHY_PHY_BCR>;
|
|
|
|
reset-names = "phy",
|
|
|
|
"phy_phy";
|
2022-05-02 14:36:34 +05:30
|
|
|
|
2023-03-27 14:56:05 -05:00
|
|
|
status = "disabled";
|
|
|
|
|
2022-05-02 14:36:34 +05:30
|
|
|
};
|
|
|
|
|
2022-05-02 14:36:32 +05:30
|
|
|
system_noc: interconnect@1620000 {
|
|
|
|
compatible = "qcom,sdx65-system-noc";
|
|
|
|
reg = <0x01620000 0x31200>;
|
|
|
|
#interconnect-cells = <1>;
|
|
|
|
qcom,bcm-voters = <&apps_bcm_voter>;
|
|
|
|
};
|
|
|
|
|
2022-05-02 10:08:03 -07:00
|
|
|
qpic_bam: dma-controller@1b04000 {
|
|
|
|
compatible = "qcom,bam-v1.7.0";
|
|
|
|
reg = <0x01b04000 0x1c000>;
|
|
|
|
interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
|
clocks = <&rpmhcc RPMH_QPIC_CLK>;
|
|
|
|
clock-names = "bam_clk";
|
|
|
|
#dma-cells = <1>;
|
|
|
|
qcom,ee = <0>;
|
|
|
|
qcom,controlled-remotely;
|
|
|
|
status = "disabled";
|
|
|
|
};
|
|
|
|
|
2022-05-02 10:08:04 -07:00
|
|
|
qpic_nand: nand-controller@1b30000 {
|
|
|
|
compatible = "qcom,sdx55-nand";
|
|
|
|
reg = <0x01b30000 0x10000>;
|
|
|
|
#address-cells = <1>;
|
|
|
|
#size-cells = <0>;
|
|
|
|
clocks = <&rpmhcc RPMH_QPIC_CLK>,
|
|
|
|
<&nand_clk_dummy>;
|
|
|
|
clock-names = "core", "aon";
|
|
|
|
|
|
|
|
dmas = <&qpic_bam 0>,
|
|
|
|
<&qpic_bam 1>,
|
|
|
|
<&qpic_bam 2>;
|
|
|
|
dma-names = "tx", "rx", "cmd";
|
|
|
|
status = "disabled";
|
|
|
|
};
|
|
|
|
|
2023-05-18 23:17:51 +05:30
|
|
|
pcie_ep: pcie-ep@1c00000 {
|
|
|
|
compatible = "qcom,sdx65-pcie-ep", "qcom,sdx55-pcie-ep";
|
|
|
|
reg = <0x01c00000 0x3000>,
|
|
|
|
<0x40000000 0xf1d>,
|
|
|
|
<0x40000f20 0xa8>,
|
|
|
|
<0x40001000 0x1000>,
|
|
|
|
<0x40200000 0x100000>,
|
|
|
|
<0x01c03000 0x3000>;
|
|
|
|
reg-names = "parf",
|
|
|
|
"dbi",
|
|
|
|
"elbi",
|
|
|
|
"atu",
|
|
|
|
"addr_space",
|
|
|
|
"mmio";
|
|
|
|
|
|
|
|
qcom,perst-regs = <&tcsr 0xb258 0xb270>;
|
|
|
|
|
|
|
|
clocks = <&gcc GCC_PCIE_AUX_CLK>,
|
|
|
|
<&gcc GCC_PCIE_CFG_AHB_CLK>,
|
|
|
|
<&gcc GCC_PCIE_MSTR_AXI_CLK>,
|
|
|
|
<&gcc GCC_PCIE_SLV_AXI_CLK>,
|
|
|
|
<&gcc GCC_PCIE_SLV_Q2A_AXI_CLK>,
|
|
|
|
<&gcc GCC_PCIE_SLEEP_CLK>,
|
|
|
|
<&gcc GCC_PCIE_0_CLKREF_EN>;
|
|
|
|
clock-names = "aux",
|
|
|
|
"cfg",
|
|
|
|
"bus_master",
|
|
|
|
"bus_slave",
|
|
|
|
"slave_q2a",
|
|
|
|
"sleep",
|
|
|
|
"ref";
|
|
|
|
|
|
|
|
interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
|
|
|
|
<GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
|
interrupt-names = "global", "doorbell";
|
|
|
|
|
2023-07-19 12:50:16 +05:30
|
|
|
interconnects = <&system_noc MASTER_PCIE_0 &mc_virt SLAVE_EBI1>,
|
|
|
|
<&mem_noc MASTER_APPSS_PROC &system_noc SLAVE_PCIE_0>;
|
|
|
|
interconnect-names = "pcie-mem", "cpu-pcie";
|
|
|
|
|
2023-05-18 23:17:51 +05:30
|
|
|
resets = <&gcc GCC_PCIE_BCR>;
|
|
|
|
reset-names = "core";
|
|
|
|
|
|
|
|
power-domains = <&gcc PCIE_GDSC>;
|
|
|
|
|
|
|
|
phys = <&pcie_phy>;
|
2023-09-24 20:31:01 +02:00
|
|
|
phy-names = "pciephy";
|
2023-05-18 23:17:51 +05:30
|
|
|
|
|
|
|
max-link-speed = <3>;
|
|
|
|
num-lanes = <2>;
|
2024-08-28 21:16:18 +05:30
|
|
|
linux,pci-domain = <0>;
|
2023-05-18 23:17:51 +05:30
|
|
|
|
|
|
|
status = "disabled";
|
|
|
|
};
|
|
|
|
|
2023-05-18 23:17:50 +05:30
|
|
|
pcie_phy: phy@1c06000 {
|
|
|
|
compatible = "qcom,sdx65-qmp-gen4x2-pcie-phy";
|
|
|
|
reg = <0x01c06000 0x2000>;
|
|
|
|
|
|
|
|
clocks = <&gcc GCC_PCIE_AUX_PHY_CLK_SRC>,
|
|
|
|
<&gcc GCC_PCIE_CFG_AHB_CLK>,
|
|
|
|
<&gcc GCC_PCIE_0_CLKREF_EN>,
|
|
|
|
<&gcc GCC_PCIE_RCHNG_PHY_CLK>,
|
|
|
|
<&gcc GCC_PCIE_PIPE_CLK>;
|
|
|
|
clock-names = "aux",
|
|
|
|
"cfg_ahb",
|
|
|
|
"ref",
|
|
|
|
"rchng",
|
|
|
|
"pipe";
|
|
|
|
|
|
|
|
resets = <&gcc GCC_PCIE_PHY_BCR>;
|
|
|
|
reset-names = "phy";
|
|
|
|
|
|
|
|
assigned-clocks = <&gcc GCC_PCIE_RCHNG_PHY_CLK>;
|
|
|
|
assigned-clock-rates = <100000000>;
|
|
|
|
|
|
|
|
power-domains = <&gcc PCIE_GDSC>;
|
|
|
|
|
|
|
|
#clock-cells = <0>;
|
|
|
|
clock-output-names = "pcie_pipe_clk";
|
|
|
|
|
|
|
|
#phy-cells = <0>;
|
|
|
|
|
|
|
|
status = "disabled";
|
|
|
|
};
|
|
|
|
|
2022-04-11 15:20:14 +05:30
|
|
|
tcsr_mutex: hwlock@1f40000 {
|
|
|
|
compatible = "qcom,tcsr-mutex";
|
|
|
|
reg = <0x01f40000 0x40000>;
|
|
|
|
#hwlock-cells = <1>;
|
|
|
|
};
|
|
|
|
|
2023-05-18 23:17:51 +05:30
|
|
|
tcsr: syscon@1fcb000 {
|
|
|
|
compatible = "qcom,sdx65-tcsr", "syscon";
|
|
|
|
reg = <0x01fc0000 0x1000>;
|
|
|
|
};
|
|
|
|
|
2023-03-27 14:56:04 -05:00
|
|
|
ipa: ipa@3f40000 {
|
|
|
|
compatible = "qcom,sdx65-ipa";
|
|
|
|
|
|
|
|
reg = <0x03f40000 0x10000>,
|
|
|
|
<0x03f50000 0x5000>,
|
|
|
|
<0x03e04000 0xfc000>;
|
|
|
|
reg-names = "ipa-reg",
|
|
|
|
"ipa-shared",
|
|
|
|
"gsi";
|
|
|
|
|
|
|
|
interrupts-extended = <&intc GIC_SPI 241 IRQ_TYPE_EDGE_RISING>,
|
|
|
|
<&intc GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
|
|
|
|
<&ipa_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
|
|
|
|
<&ipa_smp2p_in 1 IRQ_TYPE_EDGE_RISING>;
|
|
|
|
interrupt-names = "ipa",
|
|
|
|
"gsi",
|
|
|
|
"ipa-clock-query",
|
|
|
|
"ipa-setup-ready";
|
|
|
|
|
|
|
|
iommus = <&apps_smmu 0x5e0 0x0>,
|
|
|
|
<&apps_smmu 0x5e2 0x0>;
|
|
|
|
|
|
|
|
clocks = <&rpmhcc RPMH_IPA_CLK>;
|
|
|
|
clock-names = "core";
|
|
|
|
|
|
|
|
interconnects = <&system_noc MASTER_IPA &mc_virt SLAVE_EBI1>,
|
|
|
|
<&mem_noc MASTER_APPSS_PROC &system_noc SLAVE_IPA_CFG>;
|
|
|
|
interconnect-names = "memory",
|
|
|
|
"config";
|
|
|
|
|
|
|
|
qcom,smem-states = <&ipa_smp2p_out 0>,
|
|
|
|
<&ipa_smp2p_out 1>;
|
|
|
|
qcom,smem-state-names = "ipa-clock-enabled-valid",
|
|
|
|
"ipa-clock-enabled";
|
|
|
|
|
|
|
|
status = "disabled";
|
|
|
|
};
|
|
|
|
|
2022-06-01 16:15:07 +05:30
|
|
|
remoteproc_mpss: remoteproc@4080000 {
|
|
|
|
compatible = "qcom,sdx55-mpss-pas";
|
|
|
|
reg = <0x04080000 0x4040>;
|
|
|
|
|
|
|
|
interrupts-extended = <&intc GIC_SPI 250 IRQ_TYPE_EDGE_RISING>,
|
|
|
|
<&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
|
|
|
|
<&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
|
|
|
|
<&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
|
|
|
|
<&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>,
|
|
|
|
<&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>;
|
|
|
|
interrupt-names = "wdog", "fatal", "ready", "handover",
|
|
|
|
"stop-ack", "shutdown-ack";
|
|
|
|
|
|
|
|
clocks = <&rpmhcc RPMH_CXO_CLK>;
|
|
|
|
clock-names = "xo";
|
|
|
|
|
|
|
|
power-domains = <&rpmhpd SDX65_CX>,
|
|
|
|
<&rpmhpd SDX65_MSS>;
|
|
|
|
power-domain-names = "cx", "mss";
|
|
|
|
|
|
|
|
qcom,smem-states = <&modem_smp2p_out 0>;
|
|
|
|
qcom,smem-state-names = "stop";
|
|
|
|
|
|
|
|
status = "disabled";
|
|
|
|
|
|
|
|
glink-edge {
|
|
|
|
interrupts = <GIC_SPI 114 IRQ_TYPE_EDGE_RISING>;
|
|
|
|
label = "mpss";
|
|
|
|
qcom,remote-pid = <1>;
|
|
|
|
mboxes = <&apcs 15>;
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
2022-05-15 03:24:19 +05:30
|
|
|
sdhc_1: mmc@8804000 {
|
2022-04-11 15:20:11 +05:30
|
|
|
compatible = "qcom,sdx65-sdhci", "qcom,sdhci-msm-v5";
|
|
|
|
reg = <0x08804000 0x1000>;
|
2022-07-12 16:42:44 +02:00
|
|
|
reg-names = "hc";
|
2022-04-11 15:20:11 +05:30
|
|
|
interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
|
|
|
|
<GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
|
interrupt-names = "hc_irq", "pwr_irq";
|
2023-09-24 20:33:35 +02:00
|
|
|
clocks = <&gcc GCC_SDCC1_AHB_CLK>,
|
|
|
|
<&gcc GCC_SDCC1_APPS_CLK>;
|
|
|
|
clock-names = "iface", "core";
|
2022-04-11 15:20:11 +05:30
|
|
|
status = "disabled";
|
|
|
|
};
|
|
|
|
|
2022-05-02 14:36:32 +05:30
|
|
|
mem_noc: interconnect@9680000 {
|
|
|
|
compatible = "qcom,sdx65-mem-noc";
|
|
|
|
reg = <0x09680000 0x27200>;
|
|
|
|
#interconnect-cells = <1>;
|
|
|
|
qcom,bcm-voters = <&apps_bcm_voter>;
|
|
|
|
};
|
|
|
|
|
2022-05-02 14:36:34 +05:30
|
|
|
usb: usb@a6f8800 {
|
|
|
|
compatible = "qcom,sdx65-dwc3", "qcom,dwc3";
|
|
|
|
reg = <0x0a6f8800 0x400>;
|
|
|
|
#address-cells = <1>;
|
|
|
|
#size-cells = <1>;
|
|
|
|
ranges;
|
|
|
|
|
|
|
|
clocks = <&gcc GCC_USB30_SLV_AHB_CLK>,
|
|
|
|
<&gcc GCC_USB30_MASTER_CLK>,
|
|
|
|
<&gcc GCC_USB30_MSTR_AXI_CLK>,
|
2023-11-12 09:01:35 +01:00
|
|
|
<&gcc GCC_USB30_SLEEP_CLK>,
|
|
|
|
<&gcc GCC_USB30_MOCK_UTMI_CLK>;
|
|
|
|
clock-names = "cfg_noc", "core", "iface", "sleep",
|
|
|
|
"mock_utmi";
|
2022-05-02 14:36:34 +05:30
|
|
|
|
|
|
|
assigned-clocks = <&gcc GCC_USB30_MOCK_UTMI_CLK>,
|
|
|
|
<&gcc GCC_USB30_MASTER_CLK>;
|
|
|
|
assigned-clock-rates = <19200000>, <200000000>;
|
|
|
|
|
2024-01-26 00:29:19 +05:30
|
|
|
interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
|
|
|
|
<&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
|
|
|
|
<&pdc 19 IRQ_TYPE_EDGE_BOTH>,
|
2022-07-15 09:02:48 +02:00
|
|
|
<&pdc 18 IRQ_TYPE_EDGE_BOTH>,
|
2024-01-26 00:29:19 +05:30
|
|
|
<&pdc 76 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
|
interrupt-names = "pwr_event",
|
|
|
|
"hs_phy_irq",
|
|
|
|
"dp_hs_phy_irq",
|
2022-07-15 09:02:48 +02:00
|
|
|
"dm_hs_phy_irq",
|
2024-01-26 00:29:19 +05:30
|
|
|
"ss_phy_irq";
|
2022-05-02 14:36:34 +05:30
|
|
|
|
|
|
|
power-domains = <&gcc USB30_GDSC>;
|
|
|
|
|
|
|
|
resets = <&gcc GCC_USB30_BCR>;
|
|
|
|
|
2023-03-27 14:56:05 -05:00
|
|
|
status = "disabled";
|
|
|
|
|
2022-05-02 14:36:34 +05:30
|
|
|
usb_dwc3: usb@a600000 {
|
|
|
|
compatible = "snps,dwc3";
|
|
|
|
reg = <0x0a600000 0xcd00>;
|
|
|
|
interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
|
iommus = <&apps_smmu 0x1a0 0x0>;
|
|
|
|
snps,dis_u2_susphy_quirk;
|
|
|
|
snps,dis_enblslpm_quirk;
|
2024-12-31 13:39:31 +05:30
|
|
|
snps,dis-u1-entry-quirk;
|
|
|
|
snps,dis-u2-entry-quirk;
|
2023-08-25 00:19:52 +03:00
|
|
|
phys = <&usb_hsphy>, <&usb_qmpphy>;
|
2022-05-02 14:36:34 +05:30
|
|
|
phy-names = "usb2-phy", "usb3-phy";
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
2022-06-01 16:15:12 +05:30
|
|
|
restart@c264000 {
|
|
|
|
compatible = "qcom,pshold";
|
|
|
|
reg = <0x0c264000 0x1000>;
|
|
|
|
};
|
|
|
|
|
2023-09-24 20:31:03 +02:00
|
|
|
spmi_bus: spmi@c440000 {
|
2022-03-16 11:47:22 +05:30
|
|
|
compatible = "qcom,spmi-pmic-arb";
|
|
|
|
reg = <0xc440000 0xd00>,
|
|
|
|
<0xc600000 0x2000000>,
|
|
|
|
<0xe600000 0x100000>,
|
|
|
|
<0xe700000 0xa0000>,
|
|
|
|
<0xc40a000 0x26000>;
|
|
|
|
reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
|
|
|
|
interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
|
interrupt-names = "periph_irq";
|
|
|
|
interrupt-controller;
|
|
|
|
#interrupt-cells = <4>;
|
|
|
|
#address-cells = <2>;
|
|
|
|
#size-cells = <0>;
|
|
|
|
qcom,channel = <0>;
|
|
|
|
qcom,ee = <0>;
|
|
|
|
};
|
|
|
|
|
2021-10-29 17:02:05 -07:00
|
|
|
tlmm: pinctrl@f100000 {
|
|
|
|
compatible = "qcom,sdx65-tlmm";
|
|
|
|
reg = <0xf100000 0x300000>;
|
|
|
|
interrupts = <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
|
gpio-controller;
|
|
|
|
#gpio-cells = <2>;
|
|
|
|
gpio-ranges = <&tlmm 0 0 109>;
|
|
|
|
interrupt-controller;
|
|
|
|
interrupt-parent = <&intc>;
|
|
|
|
#interrupt-cells = <2>;
|
|
|
|
};
|
|
|
|
|
ARM: dts: qcom: Add SDX65 platform and MTP board support
Add basic devicetree support for SDX65 platform and MTP board from
Qualcomm. The SDX65 platform features an ARM Cortex A7 CPU which forms
the Application Processor Sub System (APSS) along with standard Qualcomm
peripherals like GCC, TLMM, BLSP, QPIC, and BAM etc... Also, there
exists the networking parts such as IPA, MHI, PCIE-EP, EMAC, and Modem
etc..
This commit adds basic devicetree support that includes GCC, RPMh clock, INTC
and Debug UART.
Signed-off-by: Vamsi Krishna Lanka <quic_vamslank@quicinc.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1635552125-16407-3-git-send-email-quic_vamslank@quicinc.com
2021-10-29 17:02:04 -07:00
|
|
|
pdc: interrupt-controller@b210000 {
|
|
|
|
compatible = "qcom,sdx65-pdc", "qcom,pdc";
|
|
|
|
reg = <0xb210000 0x10000>;
|
|
|
|
qcom,pdc-ranges = <0 147 52>, <52 266 32>;
|
|
|
|
#interrupt-cells = <2>;
|
|
|
|
interrupt-parent = <&intc>;
|
|
|
|
interrupt-controller;
|
|
|
|
};
|
|
|
|
|
2022-11-04 15:08:40 -04:00
|
|
|
sram@1468f000 {
|
|
|
|
compatible = "qcom,sdx65-imem", "syscon", "simple-mfd";
|
2022-06-01 16:15:04 +05:30
|
|
|
reg = <0x1468f000 0x1000>;
|
|
|
|
ranges = <0x0 0x1468f000 0x1000>;
|
|
|
|
#address-cells = <1>;
|
|
|
|
#size-cells = <1>;
|
|
|
|
|
|
|
|
pil-reloc@94c {
|
|
|
|
compatible = "qcom,pil-reloc-info";
|
|
|
|
reg = <0x94c 0xc8>;
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
2022-04-11 15:20:13 +05:30
|
|
|
apps_smmu: iommu@15000000 {
|
2023-01-23 18:49:31 +05:30
|
|
|
compatible = "qcom,sdx65-smmu-500", "qcom,smmu-500", "arm,mmu-500";
|
2022-04-11 15:20:13 +05:30
|
|
|
reg = <0x15000000 0x40000>;
|
|
|
|
#iommu-cells = <2>;
|
|
|
|
#global-interrupts = <1>;
|
2024-09-05 17:46:54 +02:00
|
|
|
interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
|
|
|
|
<GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
|
|
|
|
<GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>,
|
|
|
|
<GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
|
|
|
|
<GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
|
|
|
|
<GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
|
|
|
|
<GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
|
|
|
|
<GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
|
|
|
|
<GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
|
|
|
|
<GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
|
|
|
|
<GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
|
|
|
|
<GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
|
|
|
|
<GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
|
|
|
|
<GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
|
|
|
|
<GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
|
|
|
|
<GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
|
|
|
|
<GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
|
|
|
|
<GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
|
|
|
|
<GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
|
|
|
|
<GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
|
|
|
|
<GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
|
|
|
|
<GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
|
|
|
|
<GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>,
|
|
|
|
<GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>,
|
|
|
|
<GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>,
|
|
|
|
<GIC_SPI 301 IRQ_TYPE_LEVEL_HIGH>,
|
|
|
|
<GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>,
|
|
|
|
<GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>,
|
|
|
|
<GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
|
|
|
|
<GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>,
|
|
|
|
<GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>,
|
|
|
|
<GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>,
|
|
|
|
<GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>;
|
2022-04-11 15:20:13 +05:30
|
|
|
};
|
|
|
|
|
ARM: dts: qcom: Add SDX65 platform and MTP board support
Add basic devicetree support for SDX65 platform and MTP board from
Qualcomm. The SDX65 platform features an ARM Cortex A7 CPU which forms
the Application Processor Sub System (APSS) along with standard Qualcomm
peripherals like GCC, TLMM, BLSP, QPIC, and BAM etc... Also, there
exists the networking parts such as IPA, MHI, PCIE-EP, EMAC, and Modem
etc..
This commit adds basic devicetree support that includes GCC, RPMh clock, INTC
and Debug UART.
Signed-off-by: Vamsi Krishna Lanka <quic_vamslank@quicinc.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1635552125-16407-3-git-send-email-quic_vamslank@quicinc.com
2021-10-29 17:02:04 -07:00
|
|
|
intc: interrupt-controller@17800000 {
|
|
|
|
compatible = "qcom,msm-qgic2";
|
|
|
|
interrupt-controller;
|
|
|
|
interrupt-parent = <&intc>;
|
|
|
|
#interrupt-cells = <3>;
|
|
|
|
reg = <0x17800000 0x1000>,
|
|
|
|
<0x17802000 0x1000>;
|
|
|
|
};
|
|
|
|
|
2022-02-22 10:26:23 +05:30
|
|
|
a7pll: clock@17808000 {
|
|
|
|
compatible = "qcom,sdx55-a7pll";
|
|
|
|
reg = <0x17808000 0x1000>;
|
|
|
|
clocks = <&rpmhcc RPMH_CXO_CLK>;
|
|
|
|
clock-names = "bi_tcxo";
|
|
|
|
#clock-cells = <0>;
|
|
|
|
};
|
|
|
|
|
2022-02-22 10:26:24 +05:30
|
|
|
apcs: mailbox@17810000 {
|
|
|
|
compatible = "qcom,sdx55-apcs-gcc", "syscon";
|
|
|
|
reg = <0x17810000 0x2000>;
|
|
|
|
#mbox-cells = <1>;
|
|
|
|
clocks = <&rpmhcc RPMH_CXO_CLK>, <&a7pll>, <&gcc GPLL0>;
|
|
|
|
clock-names = "ref", "pll", "aux";
|
|
|
|
#clock-cells = <0>;
|
|
|
|
};
|
|
|
|
|
2022-06-01 16:15:11 +05:30
|
|
|
watchdog@17817000 {
|
|
|
|
compatible = "qcom,apss-wdt-sdx65", "qcom,kpss-wdt";
|
|
|
|
reg = <0x17817000 0x1000>;
|
|
|
|
clocks = <&sleep_clk>;
|
|
|
|
};
|
|
|
|
|
ARM: dts: qcom: Add SDX65 platform and MTP board support
Add basic devicetree support for SDX65 platform and MTP board from
Qualcomm. The SDX65 platform features an ARM Cortex A7 CPU which forms
the Application Processor Sub System (APSS) along with standard Qualcomm
peripherals like GCC, TLMM, BLSP, QPIC, and BAM etc... Also, there
exists the networking parts such as IPA, MHI, PCIE-EP, EMAC, and Modem
etc..
This commit adds basic devicetree support that includes GCC, RPMh clock, INTC
and Debug UART.
Signed-off-by: Vamsi Krishna Lanka <quic_vamslank@quicinc.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1635552125-16407-3-git-send-email-quic_vamslank@quicinc.com
2021-10-29 17:02:04 -07:00
|
|
|
timer@17820000 {
|
|
|
|
#address-cells = <1>;
|
|
|
|
#size-cells = <1>;
|
|
|
|
ranges;
|
|
|
|
compatible = "arm,armv7-timer-mem";
|
|
|
|
reg = <0x17820000 0x1000>;
|
|
|
|
clock-frequency = <19200000>;
|
|
|
|
|
|
|
|
frame@17821000 {
|
|
|
|
frame-number = <0>;
|
2023-12-05 16:33:17 +01:00
|
|
|
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
|
|
|
|
<GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
|
ARM: dts: qcom: Add SDX65 platform and MTP board support
Add basic devicetree support for SDX65 platform and MTP board from
Qualcomm. The SDX65 platform features an ARM Cortex A7 CPU which forms
the Application Processor Sub System (APSS) along with standard Qualcomm
peripherals like GCC, TLMM, BLSP, QPIC, and BAM etc... Also, there
exists the networking parts such as IPA, MHI, PCIE-EP, EMAC, and Modem
etc..
This commit adds basic devicetree support that includes GCC, RPMh clock, INTC
and Debug UART.
Signed-off-by: Vamsi Krishna Lanka <quic_vamslank@quicinc.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1635552125-16407-3-git-send-email-quic_vamslank@quicinc.com
2021-10-29 17:02:04 -07:00
|
|
|
reg = <0x17821000 0x1000>,
|
|
|
|
<0x17822000 0x1000>;
|
|
|
|
};
|
|
|
|
|
|
|
|
frame@17823000 {
|
|
|
|
frame-number = <1>;
|
2023-12-05 16:33:17 +01:00
|
|
|
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
|
ARM: dts: qcom: Add SDX65 platform and MTP board support
Add basic devicetree support for SDX65 platform and MTP board from
Qualcomm. The SDX65 platform features an ARM Cortex A7 CPU which forms
the Application Processor Sub System (APSS) along with standard Qualcomm
peripherals like GCC, TLMM, BLSP, QPIC, and BAM etc... Also, there
exists the networking parts such as IPA, MHI, PCIE-EP, EMAC, and Modem
etc..
This commit adds basic devicetree support that includes GCC, RPMh clock, INTC
and Debug UART.
Signed-off-by: Vamsi Krishna Lanka <quic_vamslank@quicinc.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1635552125-16407-3-git-send-email-quic_vamslank@quicinc.com
2021-10-29 17:02:04 -07:00
|
|
|
reg = <0x17823000 0x1000>;
|
|
|
|
status = "disabled";
|
|
|
|
};
|
|
|
|
|
|
|
|
frame@17824000 {
|
|
|
|
frame-number = <2>;
|
2023-12-05 16:33:17 +01:00
|
|
|
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
|
ARM: dts: qcom: Add SDX65 platform and MTP board support
Add basic devicetree support for SDX65 platform and MTP board from
Qualcomm. The SDX65 platform features an ARM Cortex A7 CPU which forms
the Application Processor Sub System (APSS) along with standard Qualcomm
peripherals like GCC, TLMM, BLSP, QPIC, and BAM etc... Also, there
exists the networking parts such as IPA, MHI, PCIE-EP, EMAC, and Modem
etc..
This commit adds basic devicetree support that includes GCC, RPMh clock, INTC
and Debug UART.
Signed-off-by: Vamsi Krishna Lanka <quic_vamslank@quicinc.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1635552125-16407-3-git-send-email-quic_vamslank@quicinc.com
2021-10-29 17:02:04 -07:00
|
|
|
reg = <0x17824000 0x1000>;
|
|
|
|
status = "disabled";
|
|
|
|
};
|
|
|
|
|
|
|
|
frame@17825000 {
|
|
|
|
frame-number = <3>;
|
2023-12-05 16:33:17 +01:00
|
|
|
interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
|
ARM: dts: qcom: Add SDX65 platform and MTP board support
Add basic devicetree support for SDX65 platform and MTP board from
Qualcomm. The SDX65 platform features an ARM Cortex A7 CPU which forms
the Application Processor Sub System (APSS) along with standard Qualcomm
peripherals like GCC, TLMM, BLSP, QPIC, and BAM etc... Also, there
exists the networking parts such as IPA, MHI, PCIE-EP, EMAC, and Modem
etc..
This commit adds basic devicetree support that includes GCC, RPMh clock, INTC
and Debug UART.
Signed-off-by: Vamsi Krishna Lanka <quic_vamslank@quicinc.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1635552125-16407-3-git-send-email-quic_vamslank@quicinc.com
2021-10-29 17:02:04 -07:00
|
|
|
reg = <0x17825000 0x1000>;
|
|
|
|
status = "disabled";
|
|
|
|
};
|
|
|
|
|
|
|
|
frame@17826000 {
|
|
|
|
frame-number = <4>;
|
2023-12-05 16:33:17 +01:00
|
|
|
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
|
ARM: dts: qcom: Add SDX65 platform and MTP board support
Add basic devicetree support for SDX65 platform and MTP board from
Qualcomm. The SDX65 platform features an ARM Cortex A7 CPU which forms
the Application Processor Sub System (APSS) along with standard Qualcomm
peripherals like GCC, TLMM, BLSP, QPIC, and BAM etc... Also, there
exists the networking parts such as IPA, MHI, PCIE-EP, EMAC, and Modem
etc..
This commit adds basic devicetree support that includes GCC, RPMh clock, INTC
and Debug UART.
Signed-off-by: Vamsi Krishna Lanka <quic_vamslank@quicinc.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1635552125-16407-3-git-send-email-quic_vamslank@quicinc.com
2021-10-29 17:02:04 -07:00
|
|
|
reg = <0x17826000 0x1000>;
|
|
|
|
status = "disabled";
|
|
|
|
};
|
|
|
|
|
|
|
|
frame@17827000 {
|
|
|
|
frame-number = <5>;
|
2023-12-05 16:33:17 +01:00
|
|
|
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
|
ARM: dts: qcom: Add SDX65 platform and MTP board support
Add basic devicetree support for SDX65 platform and MTP board from
Qualcomm. The SDX65 platform features an ARM Cortex A7 CPU which forms
the Application Processor Sub System (APSS) along with standard Qualcomm
peripherals like GCC, TLMM, BLSP, QPIC, and BAM etc... Also, there
exists the networking parts such as IPA, MHI, PCIE-EP, EMAC, and Modem
etc..
This commit adds basic devicetree support that includes GCC, RPMh clock, INTC
and Debug UART.
Signed-off-by: Vamsi Krishna Lanka <quic_vamslank@quicinc.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1635552125-16407-3-git-send-email-quic_vamslank@quicinc.com
2021-10-29 17:02:04 -07:00
|
|
|
reg = <0x17827000 0x1000>;
|
|
|
|
status = "disabled";
|
|
|
|
};
|
|
|
|
|
|
|
|
frame@17828000 {
|
|
|
|
frame-number = <6>;
|
2023-12-05 16:33:17 +01:00
|
|
|
interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
|
ARM: dts: qcom: Add SDX65 platform and MTP board support
Add basic devicetree support for SDX65 platform and MTP board from
Qualcomm. The SDX65 platform features an ARM Cortex A7 CPU which forms
the Application Processor Sub System (APSS) along with standard Qualcomm
peripherals like GCC, TLMM, BLSP, QPIC, and BAM etc... Also, there
exists the networking parts such as IPA, MHI, PCIE-EP, EMAC, and Modem
etc..
This commit adds basic devicetree support that includes GCC, RPMh clock, INTC
and Debug UART.
Signed-off-by: Vamsi Krishna Lanka <quic_vamslank@quicinc.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1635552125-16407-3-git-send-email-quic_vamslank@quicinc.com
2021-10-29 17:02:04 -07:00
|
|
|
reg = <0x17828000 0x1000>;
|
|
|
|
status = "disabled";
|
|
|
|
};
|
|
|
|
|
|
|
|
frame@17829000 {
|
|
|
|
frame-number = <7>;
|
2023-12-05 16:33:17 +01:00
|
|
|
interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
|
ARM: dts: qcom: Add SDX65 platform and MTP board support
Add basic devicetree support for SDX65 platform and MTP board from
Qualcomm. The SDX65 platform features an ARM Cortex A7 CPU which forms
the Application Processor Sub System (APSS) along with standard Qualcomm
peripherals like GCC, TLMM, BLSP, QPIC, and BAM etc... Also, there
exists the networking parts such as IPA, MHI, PCIE-EP, EMAC, and Modem
etc..
This commit adds basic devicetree support that includes GCC, RPMh clock, INTC
and Debug UART.
Signed-off-by: Vamsi Krishna Lanka <quic_vamslank@quicinc.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1635552125-16407-3-git-send-email-quic_vamslank@quicinc.com
2021-10-29 17:02:04 -07:00
|
|
|
reg = <0x17829000 0x1000>;
|
|
|
|
status = "disabled";
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
|
|
|
apps_rsc: rsc@17830000 {
|
|
|
|
label = "apps_rsc";
|
|
|
|
compatible = "qcom,rpmh-rsc";
|
|
|
|
reg = <0x17830000 0x10000>,
|
|
|
|
<0x17840000 0x10000>;
|
|
|
|
reg-names = "drv-0", "drv-1";
|
|
|
|
interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
|
|
|
|
<GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
|
qcom,tcs-offset = <0xd00>;
|
|
|
|
qcom,drv-id = <1>;
|
|
|
|
qcom,tcs-config = <ACTIVE_TCS 2>,
|
|
|
|
<SLEEP_TCS 2>,
|
|
|
|
<WAKE_TCS 2>,
|
|
|
|
<CONTROL_TCS 1>;
|
|
|
|
|
2022-04-11 10:59:33 +02:00
|
|
|
rpmhcc: clock-controller {
|
ARM: dts: qcom: Add SDX65 platform and MTP board support
Add basic devicetree support for SDX65 platform and MTP board from
Qualcomm. The SDX65 platform features an ARM Cortex A7 CPU which forms
the Application Processor Sub System (APSS) along with standard Qualcomm
peripherals like GCC, TLMM, BLSP, QPIC, and BAM etc... Also, there
exists the networking parts such as IPA, MHI, PCIE-EP, EMAC, and Modem
etc..
This commit adds basic devicetree support that includes GCC, RPMh clock, INTC
and Debug UART.
Signed-off-by: Vamsi Krishna Lanka <quic_vamslank@quicinc.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1635552125-16407-3-git-send-email-quic_vamslank@quicinc.com
2021-10-29 17:02:04 -07:00
|
|
|
compatible = "qcom,sdx65-rpmh-clk";
|
|
|
|
#clock-cells = <1>;
|
|
|
|
clock-names = "xo";
|
|
|
|
clocks = <&xo_board>;
|
|
|
|
};
|
2022-03-16 11:47:25 +05:30
|
|
|
|
|
|
|
rpmhpd: power-controller {
|
|
|
|
compatible = "qcom,sdx65-rpmhpd";
|
|
|
|
#power-domain-cells = <1>;
|
|
|
|
operating-points-v2 = <&rpmhpd_opp_table>;
|
|
|
|
|
|
|
|
rpmhpd_opp_table: opp-table {
|
|
|
|
compatible = "operating-points-v2";
|
|
|
|
|
|
|
|
rpmhpd_opp_ret: opp1 {
|
|
|
|
opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
|
|
|
|
};
|
|
|
|
|
|
|
|
rpmhpd_opp_min_svs: opp2 {
|
|
|
|
opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
|
|
|
|
};
|
|
|
|
|
|
|
|
rpmhpd_opp_low_svs: opp3 {
|
|
|
|
opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
|
|
|
|
};
|
|
|
|
|
|
|
|
rpmhpd_opp_svs: opp4 {
|
|
|
|
opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
|
|
|
|
};
|
|
|
|
|
|
|
|
rpmhpd_opp_svs_l1: opp5 {
|
|
|
|
opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
|
|
|
|
};
|
|
|
|
|
|
|
|
rpmhpd_opp_nom: opp6 {
|
|
|
|
opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
|
|
|
|
};
|
|
|
|
|
|
|
|
rpmhpd_opp_nom_l1: opp7 {
|
|
|
|
opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
|
|
|
|
};
|
|
|
|
|
|
|
|
rpmhpd_opp_nom_l2: opp8 {
|
|
|
|
opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
|
|
|
|
};
|
|
|
|
|
|
|
|
rpmhpd_opp_turbo: opp9 {
|
|
|
|
opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
|
|
|
|
};
|
|
|
|
|
|
|
|
rpmhpd_opp_turbo_l1: opp10 {
|
|
|
|
opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
|
|
|
|
};
|
|
|
|
};
|
|
|
|
};
|
2022-05-02 14:36:32 +05:30
|
|
|
|
|
|
|
apps_bcm_voter: bcm-voter {
|
|
|
|
compatible = "qcom,bcm-voter";
|
|
|
|
};
|
|
|
|
|
ARM: dts: qcom: Add SDX65 platform and MTP board support
Add basic devicetree support for SDX65 platform and MTP board from
Qualcomm. The SDX65 platform features an ARM Cortex A7 CPU which forms
the Application Processor Sub System (APSS) along with standard Qualcomm
peripherals like GCC, TLMM, BLSP, QPIC, and BAM etc... Also, there
exists the networking parts such as IPA, MHI, PCIE-EP, EMAC, and Modem
etc..
This commit adds basic devicetree support that includes GCC, RPMh clock, INTC
and Debug UART.
Signed-off-by: Vamsi Krishna Lanka <quic_vamslank@quicinc.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1635552125-16407-3-git-send-email-quic_vamslank@quicinc.com
2021-10-29 17:02:04 -07:00
|
|
|
};
|
|
|
|
};
|
|
|
|
|
|
|
|
timer {
|
|
|
|
compatible = "arm,armv7-timer";
|
2023-12-05 16:33:17 +01:00
|
|
|
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
|
|
|
|
<GIC_PPI 12 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
|
|
|
|
<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
|
|
|
|
<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
|
ARM: dts: qcom: Add SDX65 platform and MTP board support
Add basic devicetree support for SDX65 platform and MTP board from
Qualcomm. The SDX65 platform features an ARM Cortex A7 CPU which forms
the Application Processor Sub System (APSS) along with standard Qualcomm
peripherals like GCC, TLMM, BLSP, QPIC, and BAM etc... Also, there
exists the networking parts such as IPA, MHI, PCIE-EP, EMAC, and Modem
etc..
This commit adds basic devicetree support that includes GCC, RPMh clock, INTC
and Debug UART.
Signed-off-by: Vamsi Krishna Lanka <quic_vamslank@quicinc.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1635552125-16407-3-git-send-email-quic_vamslank@quicinc.com
2021-10-29 17:02:04 -07:00
|
|
|
clock-frequency = <19200000>;
|
|
|
|
};
|
|
|
|
};
|