linux/tools/perf/util/python.c

1454 lines
38 KiB
C
Raw Permalink Normal View History

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 15:07:57 +01:00
// SPDX-License-Identifier: GPL-2.0
perf tools: Initial python binding First clarifying that this kind of binding is not a replacement or an equivalent to the 'perf script' way of using python with perf. The 'perf script' way is to process events and look at a given script for some python function that matches the events to pass each event for processing. This is a python module, i.e. everything is driven from the python script, that merely uses "import perf" or "from perf import". perf script is focused on tracepoints, this binding is focused on profiling as an initial target. More work is needed to make available tracepoint specific variables as event variables accessible via this binding. There is one example of such usage model, in tools/perf/python/twatch.py, a tool to watch "cycles" events together with task (fork, exit) and comm perf events. For now, due to me not being able to grok how python distutils cope with building C extensions outside the sources dir the install target just builds it, I'm using it as: [root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/ [root@emilia linux]# tools/perf/python/twatch.py cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: } cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: } cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: } cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: } cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: } cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: } cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: } cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534} cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls } cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024} The first 8 mmap events in this 8 way machine are a mistery that is still being investigated. More of the tools/perf/util/ APIs will be exposed via this python binding as the need arises. For now the focus is on creating events and processing them, symbol resolution is an obvious next step, with tracepoint variables as a close second step. Cc: Clark Williams <williams@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
#include <Python.h>
#include <structmember.h>
#include <inttypes.h>
#include <poll.h>
#include <linux/err.h>
#include <perf/cpumap.h>
perf build: Use libtraceevent from the system Remove the LIBTRACEEVENT_DYNAMIC and LIBTRACEFS_DYNAMIC make command line variables. If libtraceevent isn't installed or NO_LIBTRACEEVENT=1 is passed to the build, don't compile in libtraceevent and libtracefs support. This also disables CONFIG_TRACE that controls "perf trace". CONFIG_LIBTRACEEVENT is used to control enablement in Build/Makefiles, HAVE_LIBTRACEEVENT is used in C code. Without HAVE_LIBTRACEEVENT tracepoints are disabled and as such the commands kmem, kwork, lock, sched and timechart are removed. The majority of commands continue to work including "perf test". Committer notes: Fixed up a tools/perf/util/Build reject and added: #include <traceevent/event-parse.h> to tools/perf/util/scripting-engines/trace-event-perl.c. Committer testing: $ rpm -qi libtraceevent-devel Name : libtraceevent-devel Version : 1.5.3 Release : 2.fc36 Architecture: x86_64 Install Date: Mon 25 Jul 2022 03:20:19 PM -03 Group : Unspecified Size : 27728 License : LGPLv2+ and GPLv2+ Signature : RSA/SHA256, Fri 15 Apr 2022 02:11:58 PM -03, Key ID 999f7cbf38ab71f4 Source RPM : libtraceevent-1.5.3-2.fc36.src.rpm Build Date : Fri 15 Apr 2022 10:57:01 AM -03 Build Host : buildvm-x86-05.iad2.fedoraproject.org Packager : Fedora Project Vendor : Fedora Project URL : https://git.kernel.org/pub/scm/libs/libtrace/libtraceevent.git/ Bug URL : https://bugz.fedoraproject.org/libtraceevent Summary : Development headers of libtraceevent Description : Development headers of libtraceevent-libs $ Default build: $ ldd ~/bin/perf | grep tracee libtraceevent.so.1 => /lib64/libtraceevent.so.1 (0x00007f1dcaf8f000) $ # perf trace -e sched:* --max-events 10 0.000 migration/0/17 sched:sched_migrate_task(comm: "", pid: 1603763 (perf), prio: 120, dest_cpu: 1) 0.005 migration/0/17 sched:sched_wake_idle_without_ipi(cpu: 1) 0.011 migration/0/17 sched:sched_switch(prev_comm: "", prev_pid: 17 (migration/0), prev_state: 1, next_comm: "", next_prio: 120) 1.173 :0/0 sched:sched_wakeup(comm: "", pid: 3138 (gnome-terminal-), prio: 120) 1.180 :0/0 sched:sched_switch(prev_comm: "", prev_prio: 120, next_comm: "", next_pid: 3138 (gnome-terminal-), next_prio: 120) 0.156 migration/1/21 sched:sched_migrate_task(comm: "", pid: 1603763 (perf), prio: 120, orig_cpu: 1, dest_cpu: 2) 0.160 migration/1/21 sched:sched_wake_idle_without_ipi(cpu: 2) 0.166 migration/1/21 sched:sched_switch(prev_comm: "", prev_pid: 21 (migration/1), prev_state: 1, next_comm: "", next_prio: 120) 1.183 :0/0 sched:sched_wakeup(comm: "", pid: 1602985 (kworker/u16:0-f), prio: 120, target_cpu: 1) 1.186 :0/0 sched:sched_switch(prev_comm: "", prev_prio: 120, next_comm: "", next_pid: 1602985 (kworker/u16:0-f), next_prio: 120) # Had to tweak tools/perf/util/setup.py to make sure the python binding shared object links with libtraceevent if -DHAVE_LIBTRACEEVENT is present in CFLAGS. Building with NO_LIBTRACEEVENT=1 uncovered some more build failures: - Make building of data-convert-bt.c to CONFIG_LIBTRACEEVENT=y - perf-$(CONFIG_LIBTRACEEVENT) += scripts/ - bpf_kwork.o needs also to be dependent on CONFIG_LIBTRACEEVENT=y - The python binding needed some fixups and util/trace-event.c can't be built and linked with the python binding shared object, so remove it in tools/perf/util/setup.py and exclude it from the list of dependencies in the python/perf.so Makefile.perf target. Building without libtraceevent-devel installed uncovered more build failures: - The python binding tools/perf/util/python.c was assuming that traceevent/parse-events.h was always available, which was the case when we defaulted to using the in-kernel tools/lib/traceevent/ files, now we need to enclose it under ifdef HAVE_LIBTRACEEVENT, just like the other parts of it that deal with tracepoints. - We have to ifdef the rules in the Build files with CONFIG_LIBTRACEEVENT=y to build builtin-trace.c and tools/perf/trace/beauty/ as we only ifdef setting CONFIG_TRACE=y when setting NO_LIBTRACEEVENT=1 in the make command line, not when we don't detect libtraceevent-devel installed in the system. Simplification here to avoid these two ways of disabling builtin-trace.c and not having CONFIG_TRACE=y when libtraceevent-devel isn't installed is the clean way. From Athira: <quote> tools/perf/arch/powerpc/util/Build -perf-y += kvm-stat.o +perf-$(CONFIG_LIBTRACEEVENT) += kvm-stat.o </quote> Then, ditto for arm64 and s390, detected by container cross build tests. - s/390 uses test__checkevent_tracepoint() that is now only available if HAVE_LIBTRACEEVENT is defined, enclose the callsite with ifder HAVE_LIBTRACEEVENT. Also from Athira: <quote> With this change, I could successfully compile in these environment: - Without libtraceevent-devel installed - With libtraceevent-devel installed - With “make NO_LIBTRACEEVENT=1” </quote> Then, finally rename CONFIG_TRACEEVENT to CONFIG_LIBTRACEEVENT for consistency with other libraries detected in tools/perf/. Signed-off-by: Ian Rogers <irogers@google.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Tested-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: bpf@vger.kernel.org Link: http://lore.kernel.org/lkml/20221205225940.3079667-3-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-12-05 14:59:39 -08:00
#ifdef HAVE_LIBTRACEEVENT
#include <event-parse.h>
perf build: Use libtraceevent from the system Remove the LIBTRACEEVENT_DYNAMIC and LIBTRACEFS_DYNAMIC make command line variables. If libtraceevent isn't installed or NO_LIBTRACEEVENT=1 is passed to the build, don't compile in libtraceevent and libtracefs support. This also disables CONFIG_TRACE that controls "perf trace". CONFIG_LIBTRACEEVENT is used to control enablement in Build/Makefiles, HAVE_LIBTRACEEVENT is used in C code. Without HAVE_LIBTRACEEVENT tracepoints are disabled and as such the commands kmem, kwork, lock, sched and timechart are removed. The majority of commands continue to work including "perf test". Committer notes: Fixed up a tools/perf/util/Build reject and added: #include <traceevent/event-parse.h> to tools/perf/util/scripting-engines/trace-event-perl.c. Committer testing: $ rpm -qi libtraceevent-devel Name : libtraceevent-devel Version : 1.5.3 Release : 2.fc36 Architecture: x86_64 Install Date: Mon 25 Jul 2022 03:20:19 PM -03 Group : Unspecified Size : 27728 License : LGPLv2+ and GPLv2+ Signature : RSA/SHA256, Fri 15 Apr 2022 02:11:58 PM -03, Key ID 999f7cbf38ab71f4 Source RPM : libtraceevent-1.5.3-2.fc36.src.rpm Build Date : Fri 15 Apr 2022 10:57:01 AM -03 Build Host : buildvm-x86-05.iad2.fedoraproject.org Packager : Fedora Project Vendor : Fedora Project URL : https://git.kernel.org/pub/scm/libs/libtrace/libtraceevent.git/ Bug URL : https://bugz.fedoraproject.org/libtraceevent Summary : Development headers of libtraceevent Description : Development headers of libtraceevent-libs $ Default build: $ ldd ~/bin/perf | grep tracee libtraceevent.so.1 => /lib64/libtraceevent.so.1 (0x00007f1dcaf8f000) $ # perf trace -e sched:* --max-events 10 0.000 migration/0/17 sched:sched_migrate_task(comm: "", pid: 1603763 (perf), prio: 120, dest_cpu: 1) 0.005 migration/0/17 sched:sched_wake_idle_without_ipi(cpu: 1) 0.011 migration/0/17 sched:sched_switch(prev_comm: "", prev_pid: 17 (migration/0), prev_state: 1, next_comm: "", next_prio: 120) 1.173 :0/0 sched:sched_wakeup(comm: "", pid: 3138 (gnome-terminal-), prio: 120) 1.180 :0/0 sched:sched_switch(prev_comm: "", prev_prio: 120, next_comm: "", next_pid: 3138 (gnome-terminal-), next_prio: 120) 0.156 migration/1/21 sched:sched_migrate_task(comm: "", pid: 1603763 (perf), prio: 120, orig_cpu: 1, dest_cpu: 2) 0.160 migration/1/21 sched:sched_wake_idle_without_ipi(cpu: 2) 0.166 migration/1/21 sched:sched_switch(prev_comm: "", prev_pid: 21 (migration/1), prev_state: 1, next_comm: "", next_prio: 120) 1.183 :0/0 sched:sched_wakeup(comm: "", pid: 1602985 (kworker/u16:0-f), prio: 120, target_cpu: 1) 1.186 :0/0 sched:sched_switch(prev_comm: "", prev_prio: 120, next_comm: "", next_pid: 1602985 (kworker/u16:0-f), next_prio: 120) # Had to tweak tools/perf/util/setup.py to make sure the python binding shared object links with libtraceevent if -DHAVE_LIBTRACEEVENT is present in CFLAGS. Building with NO_LIBTRACEEVENT=1 uncovered some more build failures: - Make building of data-convert-bt.c to CONFIG_LIBTRACEEVENT=y - perf-$(CONFIG_LIBTRACEEVENT) += scripts/ - bpf_kwork.o needs also to be dependent on CONFIG_LIBTRACEEVENT=y - The python binding needed some fixups and util/trace-event.c can't be built and linked with the python binding shared object, so remove it in tools/perf/util/setup.py and exclude it from the list of dependencies in the python/perf.so Makefile.perf target. Building without libtraceevent-devel installed uncovered more build failures: - The python binding tools/perf/util/python.c was assuming that traceevent/parse-events.h was always available, which was the case when we defaulted to using the in-kernel tools/lib/traceevent/ files, now we need to enclose it under ifdef HAVE_LIBTRACEEVENT, just like the other parts of it that deal with tracepoints. - We have to ifdef the rules in the Build files with CONFIG_LIBTRACEEVENT=y to build builtin-trace.c and tools/perf/trace/beauty/ as we only ifdef setting CONFIG_TRACE=y when setting NO_LIBTRACEEVENT=1 in the make command line, not when we don't detect libtraceevent-devel installed in the system. Simplification here to avoid these two ways of disabling builtin-trace.c and not having CONFIG_TRACE=y when libtraceevent-devel isn't installed is the clean way. From Athira: <quote> tools/perf/arch/powerpc/util/Build -perf-y += kvm-stat.o +perf-$(CONFIG_LIBTRACEEVENT) += kvm-stat.o </quote> Then, ditto for arm64 and s390, detected by container cross build tests. - s/390 uses test__checkevent_tracepoint() that is now only available if HAVE_LIBTRACEEVENT is defined, enclose the callsite with ifder HAVE_LIBTRACEEVENT. Also from Athira: <quote> With this change, I could successfully compile in these environment: - Without libtraceevent-devel installed - With libtraceevent-devel installed - With “make NO_LIBTRACEEVENT=1” </quote> Then, finally rename CONFIG_TRACEEVENT to CONFIG_LIBTRACEEVENT for consistency with other libraries detected in tools/perf/. Signed-off-by: Ian Rogers <irogers@google.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Tested-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: bpf@vger.kernel.org Link: http://lore.kernel.org/lkml/20221205225940.3079667-3-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-12-05 14:59:39 -08:00
#endif
#include <perf/mmap.h>
perf tools: Initial python binding First clarifying that this kind of binding is not a replacement or an equivalent to the 'perf script' way of using python with perf. The 'perf script' way is to process events and look at a given script for some python function that matches the events to pass each event for processing. This is a python module, i.e. everything is driven from the python script, that merely uses "import perf" or "from perf import". perf script is focused on tracepoints, this binding is focused on profiling as an initial target. More work is needed to make available tracepoint specific variables as event variables accessible via this binding. There is one example of such usage model, in tools/perf/python/twatch.py, a tool to watch "cycles" events together with task (fork, exit) and comm perf events. For now, due to me not being able to grok how python distutils cope with building C extensions outside the sources dir the install target just builds it, I'm using it as: [root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/ [root@emilia linux]# tools/perf/python/twatch.py cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: } cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: } cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: } cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: } cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: } cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: } cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: } cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534} cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls } cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024} The first 8 mmap events in this 8 way machine are a mistery that is still being investigated. More of the tools/perf/util/ APIs will be exposed via this python binding as the need arises. For now the focus is on creating events and processing them, symbol resolution is an obvious next step, with tracepoint variables as a close second step. Cc: Clark Williams <williams@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
#include "evlist.h"
#include "evsel.h"
#include "event.h"
#include "print_binary.h"
perf tools: Initial python binding First clarifying that this kind of binding is not a replacement or an equivalent to the 'perf script' way of using python with perf. The 'perf script' way is to process events and look at a given script for some python function that matches the events to pass each event for processing. This is a python module, i.e. everything is driven from the python script, that merely uses "import perf" or "from perf import". perf script is focused on tracepoints, this binding is focused on profiling as an initial target. More work is needed to make available tracepoint specific variables as event variables accessible via this binding. There is one example of such usage model, in tools/perf/python/twatch.py, a tool to watch "cycles" events together with task (fork, exit) and comm perf events. For now, due to me not being able to grok how python distutils cope with building C extensions outside the sources dir the install target just builds it, I'm using it as: [root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/ [root@emilia linux]# tools/perf/python/twatch.py cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: } cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: } cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: } cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: } cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: } cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: } cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: } cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534} cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls } cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024} The first 8 mmap events in this 8 way machine are a mistery that is still being investigated. More of the tools/perf/util/ APIs will be exposed via this python binding as the need arises. For now the focus is on creating events and processing them, symbol resolution is an obvious next step, with tracepoint variables as a close second step. Cc: Clark Williams <williams@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
#include "thread_map.h"
#include "trace-event.h"
perf python: Fix pyrf_evlist__read_on_cpu() interface Jaroslav reported errors from valgrind over perf python script: # echo 0 > /sys/devices/system/cpu/cpu4/online # valgrind ./test.py ==7524== Memcheck, a memory error detector ... ==7524== Command: ./test.py ==7524== pid 7526 exited ==7524== Invalid read of size 8 ==7524== at 0xCC2C2B3: perf_mmap__read_forward (evlist.c:780) ==7524== by 0xCC2A681: pyrf_evlist__read_on_cpu (python.c:959) ... ==7524== Address 0x65c4868 is 16 bytes after a block of size 459,36.. ==7524== at 0x4C2B955: calloc (vg_replace_malloc.c:711) ==7524== by 0xCC2F484: zalloc (util.h:35) ==7524== by 0xCC2F484: perf_evlist__alloc_mmap (evlist.c:978) ... The reason for this is in the python interface, that allows a script to pass arbitrary cpu number, which is then used to access struct perf_evlist::mmap array. That's obviously wrong and works only when if all cpus are available and fails if some cpu is missing, like in the example above. This patch makes pyrf_evlist__read_on_cpu() search the evlist's maps array for the proper map to access. It's linear search at the moment. Based on the way how is the read_on_cpu used, I don't think we need to be fast in here. But we could add some hash in the middle to make it fast/er. We don't allow python interface to set write_backward event attribute, so it's safe to check only evlist's mmaps. Reported-by: Jaroslav Škarvada <jskarvad@redhat.com> Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Joe Mario <jmario@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20180817114556.28000-3-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-08-17 13:45:56 +02:00
#include "mmap.h"
perf record: Add BPF event filter support Use --filter option to set BPF filter for generic events other than the tracepoints or Intel PT. The BPF program will check the sample data and filter according to the expression. For example, the below is the typical perf record for frequency mode. The sample period started from 1 and increased gradually. $ sudo ./perf record -e cycles true $ sudo ./perf script perf-exec 2272336 546683.916875: 1 cycles: ffffffff828499b8 perf_event_exec+0x298 ([kernel.kallsyms]) perf-exec 2272336 546683.916892: 1 cycles: ffffffff828499b8 perf_event_exec+0x298 ([kernel.kallsyms]) perf-exec 2272336 546683.916899: 3 cycles: ffffffff828499b8 perf_event_exec+0x298 ([kernel.kallsyms]) perf-exec 2272336 546683.916905: 17 cycles: ffffffff828499b8 perf_event_exec+0x298 ([kernel.kallsyms]) perf-exec 2272336 546683.916911: 100 cycles: ffffffff828499b8 perf_event_exec+0x298 ([kernel.kallsyms]) perf-exec 2272336 546683.916917: 589 cycles: ffffffff828499b8 perf_event_exec+0x298 ([kernel.kallsyms]) perf-exec 2272336 546683.916924: 3470 cycles: ffffffff828499b8 perf_event_exec+0x298 ([kernel.kallsyms]) perf-exec 2272336 546683.916930: 20465 cycles: ffffffff828499b8 perf_event_exec+0x298 ([kernel.kallsyms]) true 2272336 546683.916940: 119873 cycles: ffffffff8283afdd perf_iterate_ctx+0x2d ([kernel.kallsyms]) true 2272336 546683.917003: 461349 cycles: ffffffff82892517 vma_interval_tree_insert+0x37 ([kernel.kallsyms]) true 2272336 546683.917237: 635778 cycles: ffffffff82a11400 security_mmap_file+0x20 ([kernel.kallsyms]) When you add a BPF filter to get samples having periods greater than 1000, the output would look like below: $ sudo ./perf record -e cycles --filter 'period > 1000' true $ sudo ./perf script perf-exec 2273949 546850.708501: 5029 cycles: ffffffff826f9e25 finish_wait+0x5 ([kernel.kallsyms]) perf-exec 2273949 546850.708508: 32409 cycles: ffffffff826f9e25 finish_wait+0x5 ([kernel.kallsyms]) perf-exec 2273949 546850.708526: 143369 cycles: ffffffff82b4cdbf xas_start+0x5f ([kernel.kallsyms]) perf-exec 2273949 546850.708600: 372650 cycles: ffffffff8286b8f7 __pagevec_lru_add+0x117 ([kernel.kallsyms]) perf-exec 2273949 546850.708791: 482953 cycles: ffffffff829190de __mod_memcg_lruvec_state+0x4e ([kernel.kallsyms]) true 2273949 546850.709036: 501985 cycles: ffffffff828add7c tlb_gather_mmu+0x4c ([kernel.kallsyms]) true 2273949 546850.709292: 503065 cycles: 7f2446d97c03 _dl_map_object_deps+0x973 (/usr/lib/x86_64-linux-gnu/ld-linux-x86-64.so.2) Committer notes: Add stubs for perf_bpf_filter__prepare() and perf_bpf_filter__destroy() to tools/perf/util/python.c to keep it building. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Hao Luo <haoluo@google.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: James Clark <james.clark@arm.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ravi Bangoria <ravi.bangoria@amd.com> Cc: Song Liu <song@kernel.org> Cc: Stephane Eranian <eranian@google.com> Cc: bpf@vger.kernel.org Link: https://lore.kernel.org/r/20230314234237.3008956-2-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-03-14 16:42:30 -07:00
#include "util/bpf-filter.h"
#include "util/env.h"
perf python: Switch module to linking libraries from building source setup.py was building most perf sources causing setup.py to mimic the Makefile logic as well as flex/bison code to be stubbed out, due to complexity building. By using libraries fewer functions are stubbed out, the build is faster and the Makefile logic is reused which should simplify updating. The libraries are passed through LDFLAGS to avoid complexity in python. Force the -fPIC flag for libbpf.a to ensure it is suitable for linking into the perf python module. Signed-off-by: Ian Rogers <irogers@google.com> Reviewed-by: James Clark <james.clark@arm.com> Cc: Suzuki K Poulose <suzuki.poulose@arm.com> Cc: Kees Cook <keescook@chromium.org> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Nick Terrell <terrelln@fb.com> Cc: Gary Guo <gary@garyguo.net> Cc: Alex Gaynor <alex.gaynor@gmail.com> Cc: Boqun Feng <boqun.feng@gmail.com> Cc: Wedson Almeida Filho <wedsonaf@gmail.com> Cc: Ze Gao <zegao2021@gmail.com> Cc: Alice Ryhl <aliceryhl@google.com> Cc: Andrei Vagin <avagin@google.com> Cc: Yicong Yang <yangyicong@hisilicon.com> Cc: Jonathan Cameron <jonathan.cameron@huawei.com> Cc: Guo Ren <guoren@kernel.org> Cc: Miguel Ojeda <ojeda@kernel.org> Cc: Will Deacon <will@kernel.org> Cc: Mike Leach <mike.leach@linaro.org> Cc: Leo Yan <leo.yan@linux.dev> Cc: Oliver Upton <oliver.upton@linux.dev> Cc: John Garry <john.g.garry@oracle.com> Cc: Benno Lossin <benno.lossin@proton.me> Cc: Björn Roy Baron <bjorn3_gh@protonmail.com> Cc: Andreas Hindborg <a.hindborg@samsung.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20240625214117.953777-8-irogers@google.com
2024-06-25 14:41:16 -07:00
#include "util/kvm-stat.h"
#include "util/stat.h"
perf python: Switch module to linking libraries from building source setup.py was building most perf sources causing setup.py to mimic the Makefile logic as well as flex/bison code to be stubbed out, due to complexity building. By using libraries fewer functions are stubbed out, the build is faster and the Makefile logic is reused which should simplify updating. The libraries are passed through LDFLAGS to avoid complexity in python. Force the -fPIC flag for libbpf.a to ensure it is suitable for linking into the perf python module. Signed-off-by: Ian Rogers <irogers@google.com> Reviewed-by: James Clark <james.clark@arm.com> Cc: Suzuki K Poulose <suzuki.poulose@arm.com> Cc: Kees Cook <keescook@chromium.org> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Nick Terrell <terrelln@fb.com> Cc: Gary Guo <gary@garyguo.net> Cc: Alex Gaynor <alex.gaynor@gmail.com> Cc: Boqun Feng <boqun.feng@gmail.com> Cc: Wedson Almeida Filho <wedsonaf@gmail.com> Cc: Ze Gao <zegao2021@gmail.com> Cc: Alice Ryhl <aliceryhl@google.com> Cc: Andrei Vagin <avagin@google.com> Cc: Yicong Yang <yangyicong@hisilicon.com> Cc: Jonathan Cameron <jonathan.cameron@huawei.com> Cc: Guo Ren <guoren@kernel.org> Cc: Miguel Ojeda <ojeda@kernel.org> Cc: Will Deacon <will@kernel.org> Cc: Mike Leach <mike.leach@linaro.org> Cc: Leo Yan <leo.yan@linux.dev> Cc: Oliver Upton <oliver.upton@linux.dev> Cc: John Garry <john.g.garry@oracle.com> Cc: Benno Lossin <benno.lossin@proton.me> Cc: Björn Roy Baron <bjorn3_gh@protonmail.com> Cc: Andreas Hindborg <a.hindborg@samsung.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20240625214117.953777-8-irogers@google.com
2024-06-25 14:41:16 -07:00
#include "util/kwork.h"
#include "util/sample.h"
perf python: Switch module to linking libraries from building source setup.py was building most perf sources causing setup.py to mimic the Makefile logic as well as flex/bison code to be stubbed out, due to complexity building. By using libraries fewer functions are stubbed out, the build is faster and the Makefile logic is reused which should simplify updating. The libraries are passed through LDFLAGS to avoid complexity in python. Force the -fPIC flag for libbpf.a to ensure it is suitable for linking into the perf python module. Signed-off-by: Ian Rogers <irogers@google.com> Reviewed-by: James Clark <james.clark@arm.com> Cc: Suzuki K Poulose <suzuki.poulose@arm.com> Cc: Kees Cook <keescook@chromium.org> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Nick Terrell <terrelln@fb.com> Cc: Gary Guo <gary@garyguo.net> Cc: Alex Gaynor <alex.gaynor@gmail.com> Cc: Boqun Feng <boqun.feng@gmail.com> Cc: Wedson Almeida Filho <wedsonaf@gmail.com> Cc: Ze Gao <zegao2021@gmail.com> Cc: Alice Ryhl <aliceryhl@google.com> Cc: Andrei Vagin <avagin@google.com> Cc: Yicong Yang <yangyicong@hisilicon.com> Cc: Jonathan Cameron <jonathan.cameron@huawei.com> Cc: Guo Ren <guoren@kernel.org> Cc: Miguel Ojeda <ojeda@kernel.org> Cc: Will Deacon <will@kernel.org> Cc: Mike Leach <mike.leach@linaro.org> Cc: Leo Yan <leo.yan@linux.dev> Cc: Oliver Upton <oliver.upton@linux.dev> Cc: John Garry <john.g.garry@oracle.com> Cc: Benno Lossin <benno.lossin@proton.me> Cc: Björn Roy Baron <bjorn3_gh@protonmail.com> Cc: Andreas Hindborg <a.hindborg@samsung.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20240625214117.953777-8-irogers@google.com
2024-06-25 14:41:16 -07:00
#include "util/lock-contention.h"
#include <internal/lib.h>
perf python: Switch module to linking libraries from building source setup.py was building most perf sources causing setup.py to mimic the Makefile logic as well as flex/bison code to be stubbed out, due to complexity building. By using libraries fewer functions are stubbed out, the build is faster and the Makefile logic is reused which should simplify updating. The libraries are passed through LDFLAGS to avoid complexity in python. Force the -fPIC flag for libbpf.a to ensure it is suitable for linking into the perf python module. Signed-off-by: Ian Rogers <irogers@google.com> Reviewed-by: James Clark <james.clark@arm.com> Cc: Suzuki K Poulose <suzuki.poulose@arm.com> Cc: Kees Cook <keescook@chromium.org> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Nick Terrell <terrelln@fb.com> Cc: Gary Guo <gary@garyguo.net> Cc: Alex Gaynor <alex.gaynor@gmail.com> Cc: Boqun Feng <boqun.feng@gmail.com> Cc: Wedson Almeida Filho <wedsonaf@gmail.com> Cc: Ze Gao <zegao2021@gmail.com> Cc: Alice Ryhl <aliceryhl@google.com> Cc: Andrei Vagin <avagin@google.com> Cc: Yicong Yang <yangyicong@hisilicon.com> Cc: Jonathan Cameron <jonathan.cameron@huawei.com> Cc: Guo Ren <guoren@kernel.org> Cc: Miguel Ojeda <ojeda@kernel.org> Cc: Will Deacon <will@kernel.org> Cc: Mike Leach <mike.leach@linaro.org> Cc: Leo Yan <leo.yan@linux.dev> Cc: Oliver Upton <oliver.upton@linux.dev> Cc: John Garry <john.g.garry@oracle.com> Cc: Benno Lossin <benno.lossin@proton.me> Cc: Björn Roy Baron <bjorn3_gh@protonmail.com> Cc: Andreas Hindborg <a.hindborg@samsung.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20240625214117.953777-8-irogers@google.com
2024-06-25 14:41:16 -07:00
#include "../builtin.h"
perf tools: Initial python binding First clarifying that this kind of binding is not a replacement or an equivalent to the 'perf script' way of using python with perf. The 'perf script' way is to process events and look at a given script for some python function that matches the events to pass each event for processing. This is a python module, i.e. everything is driven from the python script, that merely uses "import perf" or "from perf import". perf script is focused on tracepoints, this binding is focused on profiling as an initial target. More work is needed to make available tracepoint specific variables as event variables accessible via this binding. There is one example of such usage model, in tools/perf/python/twatch.py, a tool to watch "cycles" events together with task (fork, exit) and comm perf events. For now, due to me not being able to grok how python distutils cope with building C extensions outside the sources dir the install target just builds it, I'm using it as: [root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/ [root@emilia linux]# tools/perf/python/twatch.py cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: } cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: } cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: } cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: } cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: } cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: } cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: } cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534} cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls } cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024} The first 8 mmap events in this 8 way machine are a mistery that is still being investigated. More of the tools/perf/util/ APIs will be exposed via this python binding as the need arises. For now the focus is on creating events and processing them, symbol resolution is an obvious next step, with tracepoint variables as a close second step. Cc: Clark Williams <williams@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
perf tools: Add Python 3 support Added Python 3 support while keeping Python 2.7 compatibility. Committer notes: This doesn't make it to auto detect python 3, one has to explicitely ask it to build with python 3 devel files, here are the instructions provided by Jaroslav: --- $ cp -a tools/perf tools/python3-perf $ make V=1 prefix=/usr -C tools/perf PYTHON=/usr/bin/python2 all $ make V=1 prefix=/usr -C tools/python3-perf PYTHON=/usr/bin/python3 all $ make V=1 prefix=/usr -C tools/python3-perf PYTHON=/usr/bin/python3 DESTDIR=%{buildroot} install-python_ext $ make V=1 prefix=/usr -C tools/perf PYTHON=/usr/bin/python2 DESTDIR=%{buildroot} install-python_ext --- We need to make this automatic, just like the existing tests for checking if the python2 devel files are in place, allowing the build with python3 if available, fallbacking to python2 and then just disabling it if none are available. So, using the PYTHON variable to build it using O= we get: Before this patch: $ rpm -q python3 python3-devel python3-3.6.4-7.fc27.x86_64 python3-devel-3.6.4-7.fc27.x86_64 $ rm -rf /tmp/build/perf/ ; mkdir -p /tmp/build/perf ; make O=/tmp/build/perf PYTHON=/usr/bin/python3 -C tools/perf install-bin make: Entering directory '/home/acme/git/linux/tools/perf' <SNIP> Makefile.config:670: Python 3 is not yet supported; please set Makefile.config:671: PYTHON and/or PYTHON_CONFIG appropriately. Makefile.config:672: If you also have Python 2 installed, then Makefile.config:673: try something like: Makefile.config:674: Makefile.config:675: make PYTHON=python2 Makefile.config:676: Makefile.config:677: Otherwise, disable Python support entirely: Makefile.config:678: Makefile.config:679: make NO_LIBPYTHON=1 Makefile.config:680: Makefile.config:681: *** . Stop. make[1]: *** [Makefile.perf:212: sub-make] Error 2 make: *** [Makefile:110: install-bin] Error 2 make: Leaving directory '/home/acme/git/linux/tools/perf' $ After: $ make O=/tmp/build/perf PYTHON=python3 -C tools/perf install-bin $ ldd ~/bin/perf | grep python libpython3.6m.so.1.0 => /lib64/libpython3.6m.so.1.0 (0x00007f58a31e8000) $ rpm -qf /lib64/libpython3.6m.so.1.0 python3-libs-3.6.4-7.fc27.x86_64 $ Now verify that when using the binding the right ELF file is loaded, using perf trace: $ perf trace -e open* perf test python 0.051 ( 0.016 ms): perf/3927 openat(dfd: CWD, filename: /etc/ld.so.cache, flags: CLOEXEC ) = 3 <SNIP> 18: 'import perf' in python : 8.849 ( 0.013 ms): sh/3929 openat(dfd: CWD, filename: /etc/ld.so.cache, flags: CLOEXEC ) = 3 <SNIP> 25.572 ( 0.008 ms): python3/3931 openat(dfd: CWD, filename: /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so, flags: CLOEXEC) = 3 <SNIP> Ok <SNIP> $ And using tools/perf/python/twatch.py, to show PERF_RECORD_ metaevents: $ python3 tools/perf/python/twatch.py cpu: 3, pid: 16060, tid: 16060 { type: fork, pid: 5207, ppid: 16060, tid: 5207, ptid: 16060, time: 10798513015459} cpu: 3, pid: 16060, tid: 16060 { type: fork, pid: 5208, ppid: 16060, tid: 5208, ptid: 16060, time: 10798513562503} cpu: 0, pid: 5208, tid: 5208 { type: comm, pid: 5208, tid: 5208, comm: grep } cpu: 2, pid: 5207, tid: 5207 { type: comm, pid: 5207, tid: 5207, comm: ps } cpu: 2, pid: 5207, tid: 5207 { type: exit, pid: 5207, ppid: 5207, tid: 5207, ptid: 5207, time: 10798551337484} cpu: 3, pid: 5208, tid: 5208 { type: exit, pid: 5208, ppid: 5208, tid: 5208, ptid: 5208, time: 10798551292153} cpu: 3, pid: 601, tid: 601 { type: fork, pid: 5209, ppid: 601, tid: 5209, ptid: 601, time: 10801779977324} ^CTraceback (most recent call last): File "tools/perf/python/twatch.py", line 68, in <module> main() File "tools/perf/python/twatch.py", line 40, in main evlist.poll(timeout = -1) KeyboardInterrupt $ # ps ax|grep twatch 5197 pts/8 S+ 0:00 python3 tools/perf/python/twatch.py # ls -la /proc/5197/smaps -r--r--r--. 1 acme acme 0 Feb 19 13:14 /proc/5197/smaps # grep python /proc/5197/smaps 558111307000-558111309000 r-xp 00000000 fd:00 3151710 /usr/bin/python3.6 558111508000-558111509000 r--p 00001000 fd:00 3151710 /usr/bin/python3.6 558111509000-55811150a000 rw-p 00002000 fd:00 3151710 /usr/bin/python3.6 7ffad6fc1000-7ffad7008000 r-xp 00000000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so 7ffad7008000-7ffad7207000 ---p 00047000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so 7ffad7207000-7ffad7208000 r--p 00046000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so 7ffad7208000-7ffad7215000 rw-p 00047000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so 7ffadea77000-7ffaded3d000 r-xp 00000000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0 7ffaded3d000-7ffadef3c000 ---p 002c6000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0 7ffadef3c000-7ffadef42000 r--p 002c5000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0 7ffadef42000-7ffadefa5000 rw-p 002cb000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0 # And with this patch, but building normally, without specifying the PYTHON=python3 part, which will make it use python2 if its devel files are available, like in this test: $ make O=/tmp/build/perf -C tools/perf install-bin $ ldd ~/bin/perf | grep python libpython2.7.so.1.0 => /lib64/libpython2.7.so.1.0 (0x00007f6a44410000) $ ldd /tmp/build/perf/python_ext_build/lib/perf.so | grep python libpython2.7.so.1.0 => /lib64/libpython2.7.so.1.0 (0x00007fed28a2c000) $ [acme@jouet perf]$ tools/perf/python/twatch.py cpu: 0, pid: 2817, tid: 2817 { type: fork, pid: 2817, ppid: 2817, tid: 8910, ptid: 2817, time: 11126454335306} cpu: 0, pid: 2817, tid: 2817 { type: comm, pid: 2817, tid: 8910, comm: worker } $ ps ax | grep twatch.py 8909 pts/8 S+ 0:00 /usr/bin/python tools/perf/python/twatch.py $ grep python /proc/8909/smaps 5579de658000-5579de659000 r-xp 00000000 fd:00 3156044 /usr/bin/python2.7 5579de858000-5579de859000 r--p 00000000 fd:00 3156044 /usr/bin/python2.7 5579de859000-5579de85a000 rw-p 00001000 fd:00 3156044 /usr/bin/python2.7 7f0de01f7000-7f0de023e000 r-xp 00000000 00:2d 230695 /tmp/build/perf/python/perf.so 7f0de023e000-7f0de043d000 ---p 00047000 00:2d 230695 /tmp/build/perf/python/perf.so 7f0de043d000-7f0de043e000 r--p 00046000 00:2d 230695 /tmp/build/perf/python/perf.so 7f0de043e000-7f0de044b000 rw-p 00047000 00:2d 230695 /tmp/build/perf/python/perf.so 7f0de6f0f000-7f0de6f13000 r-xp 00000000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so 7f0de6f13000-7f0de7113000 ---p 00004000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so 7f0de7113000-7f0de7114000 r--p 00004000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so 7f0de7114000-7f0de7115000 rw-p 00005000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so 7f0de7e73000-7f0de8052000 r-xp 00000000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0 7f0de8052000-7f0de8251000 ---p 001df000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0 7f0de8251000-7f0de8255000 r--p 001de000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0 7f0de8255000-7f0de8291000 rw-p 001e2000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0 $ Signed-off-by: Jaroslav Škarvada <jskarvad@redhat.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> LPU-Reference: 20180119205641.24242-1-jskarvad@redhat.com Link: https://lkml.kernel.org/n/tip-8d7dt9kqp83vsz25hagug8fu@git.kernel.org [ Removed explicit check for python version, allowing it to really build with python3 ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-01-19 21:56:41 +01:00
#if PY_MAJOR_VERSION < 3
#define _PyUnicode_FromString(arg) \
PyString_FromString(arg)
#define _PyUnicode_AsString(arg) \
PyString_AsString(arg)
#define _PyUnicode_FromFormat(...) \
PyString_FromFormat(__VA_ARGS__)
#define _PyLong_FromLong(arg) \
PyInt_FromLong(arg)
#else
#define _PyUnicode_FromString(arg) \
PyUnicode_FromString(arg)
#define _PyUnicode_FromFormat(...) \
PyUnicode_FromFormat(__VA_ARGS__)
#define _PyLong_FromLong(arg) \
PyLong_FromLong(arg)
#endif
#ifndef Py_TYPE
#define Py_TYPE(ob) (((PyObject*)(ob))->ob_type)
#endif
perf: Fix undefined PyVarObject_HEAD_INIT in python 2.5 PyVarObject_HEAD_INIT is undefined in python 2.5, resulting in a build crash: util/python.c:81: attention : déclaration implicite de la fonction « «PyVarObject_HEAD_INIT» » util/python.c:82: erreur: request for member «tp_name» in something not a structure or union util/python.c:117: erreur: request for member «tp_name» in something not a structure or union util/python.c:146: erreur: request for member «tp_name» in something not a structure or union util/python.c:177: erreur: request for member «tp_name» in something not a structure or union util/python.c:290: erreur: request for member «tp_name» in something not a structure or union util/python.c:359: erreur: request for member «tp_name» in something not a structure or union util/python.c:532: erreur: request for member «tp_name» in something not a structure or union util/python.c:761: erreur: request for member «tp_name» in something not a structure or union error: command 'gcc' failed with exit status 1 make: *** [python/perf.so] Erreur 1 We can fix that by defining PyVarObject_HEAD_INIT as a wrapper on PyObject_HEAD_INIT, thanks to a trick found on biopython: https://github.com/biopython/biopython/commit/d4eaf57946c7b4c32eca8d18821edf32f83e300d Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-02-25 21:30:16 +01:00
/* Define PyVarObject_HEAD_INIT for python 2.5 */
#ifndef PyVarObject_HEAD_INIT
# define PyVarObject_HEAD_INIT(type, size) PyObject_HEAD_INIT(type) size,
#endif
perf tools: Add Python 3 support Added Python 3 support while keeping Python 2.7 compatibility. Committer notes: This doesn't make it to auto detect python 3, one has to explicitely ask it to build with python 3 devel files, here are the instructions provided by Jaroslav: --- $ cp -a tools/perf tools/python3-perf $ make V=1 prefix=/usr -C tools/perf PYTHON=/usr/bin/python2 all $ make V=1 prefix=/usr -C tools/python3-perf PYTHON=/usr/bin/python3 all $ make V=1 prefix=/usr -C tools/python3-perf PYTHON=/usr/bin/python3 DESTDIR=%{buildroot} install-python_ext $ make V=1 prefix=/usr -C tools/perf PYTHON=/usr/bin/python2 DESTDIR=%{buildroot} install-python_ext --- We need to make this automatic, just like the existing tests for checking if the python2 devel files are in place, allowing the build with python3 if available, fallbacking to python2 and then just disabling it if none are available. So, using the PYTHON variable to build it using O= we get: Before this patch: $ rpm -q python3 python3-devel python3-3.6.4-7.fc27.x86_64 python3-devel-3.6.4-7.fc27.x86_64 $ rm -rf /tmp/build/perf/ ; mkdir -p /tmp/build/perf ; make O=/tmp/build/perf PYTHON=/usr/bin/python3 -C tools/perf install-bin make: Entering directory '/home/acme/git/linux/tools/perf' <SNIP> Makefile.config:670: Python 3 is not yet supported; please set Makefile.config:671: PYTHON and/or PYTHON_CONFIG appropriately. Makefile.config:672: If you also have Python 2 installed, then Makefile.config:673: try something like: Makefile.config:674: Makefile.config:675: make PYTHON=python2 Makefile.config:676: Makefile.config:677: Otherwise, disable Python support entirely: Makefile.config:678: Makefile.config:679: make NO_LIBPYTHON=1 Makefile.config:680: Makefile.config:681: *** . Stop. make[1]: *** [Makefile.perf:212: sub-make] Error 2 make: *** [Makefile:110: install-bin] Error 2 make: Leaving directory '/home/acme/git/linux/tools/perf' $ After: $ make O=/tmp/build/perf PYTHON=python3 -C tools/perf install-bin $ ldd ~/bin/perf | grep python libpython3.6m.so.1.0 => /lib64/libpython3.6m.so.1.0 (0x00007f58a31e8000) $ rpm -qf /lib64/libpython3.6m.so.1.0 python3-libs-3.6.4-7.fc27.x86_64 $ Now verify that when using the binding the right ELF file is loaded, using perf trace: $ perf trace -e open* perf test python 0.051 ( 0.016 ms): perf/3927 openat(dfd: CWD, filename: /etc/ld.so.cache, flags: CLOEXEC ) = 3 <SNIP> 18: 'import perf' in python : 8.849 ( 0.013 ms): sh/3929 openat(dfd: CWD, filename: /etc/ld.so.cache, flags: CLOEXEC ) = 3 <SNIP> 25.572 ( 0.008 ms): python3/3931 openat(dfd: CWD, filename: /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so, flags: CLOEXEC) = 3 <SNIP> Ok <SNIP> $ And using tools/perf/python/twatch.py, to show PERF_RECORD_ metaevents: $ python3 tools/perf/python/twatch.py cpu: 3, pid: 16060, tid: 16060 { type: fork, pid: 5207, ppid: 16060, tid: 5207, ptid: 16060, time: 10798513015459} cpu: 3, pid: 16060, tid: 16060 { type: fork, pid: 5208, ppid: 16060, tid: 5208, ptid: 16060, time: 10798513562503} cpu: 0, pid: 5208, tid: 5208 { type: comm, pid: 5208, tid: 5208, comm: grep } cpu: 2, pid: 5207, tid: 5207 { type: comm, pid: 5207, tid: 5207, comm: ps } cpu: 2, pid: 5207, tid: 5207 { type: exit, pid: 5207, ppid: 5207, tid: 5207, ptid: 5207, time: 10798551337484} cpu: 3, pid: 5208, tid: 5208 { type: exit, pid: 5208, ppid: 5208, tid: 5208, ptid: 5208, time: 10798551292153} cpu: 3, pid: 601, tid: 601 { type: fork, pid: 5209, ppid: 601, tid: 5209, ptid: 601, time: 10801779977324} ^CTraceback (most recent call last): File "tools/perf/python/twatch.py", line 68, in <module> main() File "tools/perf/python/twatch.py", line 40, in main evlist.poll(timeout = -1) KeyboardInterrupt $ # ps ax|grep twatch 5197 pts/8 S+ 0:00 python3 tools/perf/python/twatch.py # ls -la /proc/5197/smaps -r--r--r--. 1 acme acme 0 Feb 19 13:14 /proc/5197/smaps # grep python /proc/5197/smaps 558111307000-558111309000 r-xp 00000000 fd:00 3151710 /usr/bin/python3.6 558111508000-558111509000 r--p 00001000 fd:00 3151710 /usr/bin/python3.6 558111509000-55811150a000 rw-p 00002000 fd:00 3151710 /usr/bin/python3.6 7ffad6fc1000-7ffad7008000 r-xp 00000000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so 7ffad7008000-7ffad7207000 ---p 00047000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so 7ffad7207000-7ffad7208000 r--p 00046000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so 7ffad7208000-7ffad7215000 rw-p 00047000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so 7ffadea77000-7ffaded3d000 r-xp 00000000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0 7ffaded3d000-7ffadef3c000 ---p 002c6000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0 7ffadef3c000-7ffadef42000 r--p 002c5000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0 7ffadef42000-7ffadefa5000 rw-p 002cb000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0 # And with this patch, but building normally, without specifying the PYTHON=python3 part, which will make it use python2 if its devel files are available, like in this test: $ make O=/tmp/build/perf -C tools/perf install-bin $ ldd ~/bin/perf | grep python libpython2.7.so.1.0 => /lib64/libpython2.7.so.1.0 (0x00007f6a44410000) $ ldd /tmp/build/perf/python_ext_build/lib/perf.so | grep python libpython2.7.so.1.0 => /lib64/libpython2.7.so.1.0 (0x00007fed28a2c000) $ [acme@jouet perf]$ tools/perf/python/twatch.py cpu: 0, pid: 2817, tid: 2817 { type: fork, pid: 2817, ppid: 2817, tid: 8910, ptid: 2817, time: 11126454335306} cpu: 0, pid: 2817, tid: 2817 { type: comm, pid: 2817, tid: 8910, comm: worker } $ ps ax | grep twatch.py 8909 pts/8 S+ 0:00 /usr/bin/python tools/perf/python/twatch.py $ grep python /proc/8909/smaps 5579de658000-5579de659000 r-xp 00000000 fd:00 3156044 /usr/bin/python2.7 5579de858000-5579de859000 r--p 00000000 fd:00 3156044 /usr/bin/python2.7 5579de859000-5579de85a000 rw-p 00001000 fd:00 3156044 /usr/bin/python2.7 7f0de01f7000-7f0de023e000 r-xp 00000000 00:2d 230695 /tmp/build/perf/python/perf.so 7f0de023e000-7f0de043d000 ---p 00047000 00:2d 230695 /tmp/build/perf/python/perf.so 7f0de043d000-7f0de043e000 r--p 00046000 00:2d 230695 /tmp/build/perf/python/perf.so 7f0de043e000-7f0de044b000 rw-p 00047000 00:2d 230695 /tmp/build/perf/python/perf.so 7f0de6f0f000-7f0de6f13000 r-xp 00000000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so 7f0de6f13000-7f0de7113000 ---p 00004000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so 7f0de7113000-7f0de7114000 r--p 00004000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so 7f0de7114000-7f0de7115000 rw-p 00005000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so 7f0de7e73000-7f0de8052000 r-xp 00000000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0 7f0de8052000-7f0de8251000 ---p 001df000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0 7f0de8251000-7f0de8255000 r--p 001de000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0 7f0de8255000-7f0de8291000 rw-p 001e2000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0 $ Signed-off-by: Jaroslav Škarvada <jskarvad@redhat.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> LPU-Reference: 20180119205641.24242-1-jskarvad@redhat.com Link: https://lkml.kernel.org/n/tip-8d7dt9kqp83vsz25hagug8fu@git.kernel.org [ Removed explicit check for python version, allowing it to really build with python3 ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-01-19 21:56:41 +01:00
#if PY_MAJOR_VERSION < 3
PyMODINIT_FUNC initperf(void);
perf tools: Add Python 3 support Added Python 3 support while keeping Python 2.7 compatibility. Committer notes: This doesn't make it to auto detect python 3, one has to explicitely ask it to build with python 3 devel files, here are the instructions provided by Jaroslav: --- $ cp -a tools/perf tools/python3-perf $ make V=1 prefix=/usr -C tools/perf PYTHON=/usr/bin/python2 all $ make V=1 prefix=/usr -C tools/python3-perf PYTHON=/usr/bin/python3 all $ make V=1 prefix=/usr -C tools/python3-perf PYTHON=/usr/bin/python3 DESTDIR=%{buildroot} install-python_ext $ make V=1 prefix=/usr -C tools/perf PYTHON=/usr/bin/python2 DESTDIR=%{buildroot} install-python_ext --- We need to make this automatic, just like the existing tests for checking if the python2 devel files are in place, allowing the build with python3 if available, fallbacking to python2 and then just disabling it if none are available. So, using the PYTHON variable to build it using O= we get: Before this patch: $ rpm -q python3 python3-devel python3-3.6.4-7.fc27.x86_64 python3-devel-3.6.4-7.fc27.x86_64 $ rm -rf /tmp/build/perf/ ; mkdir -p /tmp/build/perf ; make O=/tmp/build/perf PYTHON=/usr/bin/python3 -C tools/perf install-bin make: Entering directory '/home/acme/git/linux/tools/perf' <SNIP> Makefile.config:670: Python 3 is not yet supported; please set Makefile.config:671: PYTHON and/or PYTHON_CONFIG appropriately. Makefile.config:672: If you also have Python 2 installed, then Makefile.config:673: try something like: Makefile.config:674: Makefile.config:675: make PYTHON=python2 Makefile.config:676: Makefile.config:677: Otherwise, disable Python support entirely: Makefile.config:678: Makefile.config:679: make NO_LIBPYTHON=1 Makefile.config:680: Makefile.config:681: *** . Stop. make[1]: *** [Makefile.perf:212: sub-make] Error 2 make: *** [Makefile:110: install-bin] Error 2 make: Leaving directory '/home/acme/git/linux/tools/perf' $ After: $ make O=/tmp/build/perf PYTHON=python3 -C tools/perf install-bin $ ldd ~/bin/perf | grep python libpython3.6m.so.1.0 => /lib64/libpython3.6m.so.1.0 (0x00007f58a31e8000) $ rpm -qf /lib64/libpython3.6m.so.1.0 python3-libs-3.6.4-7.fc27.x86_64 $ Now verify that when using the binding the right ELF file is loaded, using perf trace: $ perf trace -e open* perf test python 0.051 ( 0.016 ms): perf/3927 openat(dfd: CWD, filename: /etc/ld.so.cache, flags: CLOEXEC ) = 3 <SNIP> 18: 'import perf' in python : 8.849 ( 0.013 ms): sh/3929 openat(dfd: CWD, filename: /etc/ld.so.cache, flags: CLOEXEC ) = 3 <SNIP> 25.572 ( 0.008 ms): python3/3931 openat(dfd: CWD, filename: /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so, flags: CLOEXEC) = 3 <SNIP> Ok <SNIP> $ And using tools/perf/python/twatch.py, to show PERF_RECORD_ metaevents: $ python3 tools/perf/python/twatch.py cpu: 3, pid: 16060, tid: 16060 { type: fork, pid: 5207, ppid: 16060, tid: 5207, ptid: 16060, time: 10798513015459} cpu: 3, pid: 16060, tid: 16060 { type: fork, pid: 5208, ppid: 16060, tid: 5208, ptid: 16060, time: 10798513562503} cpu: 0, pid: 5208, tid: 5208 { type: comm, pid: 5208, tid: 5208, comm: grep } cpu: 2, pid: 5207, tid: 5207 { type: comm, pid: 5207, tid: 5207, comm: ps } cpu: 2, pid: 5207, tid: 5207 { type: exit, pid: 5207, ppid: 5207, tid: 5207, ptid: 5207, time: 10798551337484} cpu: 3, pid: 5208, tid: 5208 { type: exit, pid: 5208, ppid: 5208, tid: 5208, ptid: 5208, time: 10798551292153} cpu: 3, pid: 601, tid: 601 { type: fork, pid: 5209, ppid: 601, tid: 5209, ptid: 601, time: 10801779977324} ^CTraceback (most recent call last): File "tools/perf/python/twatch.py", line 68, in <module> main() File "tools/perf/python/twatch.py", line 40, in main evlist.poll(timeout = -1) KeyboardInterrupt $ # ps ax|grep twatch 5197 pts/8 S+ 0:00 python3 tools/perf/python/twatch.py # ls -la /proc/5197/smaps -r--r--r--. 1 acme acme 0 Feb 19 13:14 /proc/5197/smaps # grep python /proc/5197/smaps 558111307000-558111309000 r-xp 00000000 fd:00 3151710 /usr/bin/python3.6 558111508000-558111509000 r--p 00001000 fd:00 3151710 /usr/bin/python3.6 558111509000-55811150a000 rw-p 00002000 fd:00 3151710 /usr/bin/python3.6 7ffad6fc1000-7ffad7008000 r-xp 00000000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so 7ffad7008000-7ffad7207000 ---p 00047000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so 7ffad7207000-7ffad7208000 r--p 00046000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so 7ffad7208000-7ffad7215000 rw-p 00047000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so 7ffadea77000-7ffaded3d000 r-xp 00000000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0 7ffaded3d000-7ffadef3c000 ---p 002c6000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0 7ffadef3c000-7ffadef42000 r--p 002c5000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0 7ffadef42000-7ffadefa5000 rw-p 002cb000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0 # And with this patch, but building normally, without specifying the PYTHON=python3 part, which will make it use python2 if its devel files are available, like in this test: $ make O=/tmp/build/perf -C tools/perf install-bin $ ldd ~/bin/perf | grep python libpython2.7.so.1.0 => /lib64/libpython2.7.so.1.0 (0x00007f6a44410000) $ ldd /tmp/build/perf/python_ext_build/lib/perf.so | grep python libpython2.7.so.1.0 => /lib64/libpython2.7.so.1.0 (0x00007fed28a2c000) $ [acme@jouet perf]$ tools/perf/python/twatch.py cpu: 0, pid: 2817, tid: 2817 { type: fork, pid: 2817, ppid: 2817, tid: 8910, ptid: 2817, time: 11126454335306} cpu: 0, pid: 2817, tid: 2817 { type: comm, pid: 2817, tid: 8910, comm: worker } $ ps ax | grep twatch.py 8909 pts/8 S+ 0:00 /usr/bin/python tools/perf/python/twatch.py $ grep python /proc/8909/smaps 5579de658000-5579de659000 r-xp 00000000 fd:00 3156044 /usr/bin/python2.7 5579de858000-5579de859000 r--p 00000000 fd:00 3156044 /usr/bin/python2.7 5579de859000-5579de85a000 rw-p 00001000 fd:00 3156044 /usr/bin/python2.7 7f0de01f7000-7f0de023e000 r-xp 00000000 00:2d 230695 /tmp/build/perf/python/perf.so 7f0de023e000-7f0de043d000 ---p 00047000 00:2d 230695 /tmp/build/perf/python/perf.so 7f0de043d000-7f0de043e000 r--p 00046000 00:2d 230695 /tmp/build/perf/python/perf.so 7f0de043e000-7f0de044b000 rw-p 00047000 00:2d 230695 /tmp/build/perf/python/perf.so 7f0de6f0f000-7f0de6f13000 r-xp 00000000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so 7f0de6f13000-7f0de7113000 ---p 00004000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so 7f0de7113000-7f0de7114000 r--p 00004000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so 7f0de7114000-7f0de7115000 rw-p 00005000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so 7f0de7e73000-7f0de8052000 r-xp 00000000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0 7f0de8052000-7f0de8251000 ---p 001df000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0 7f0de8251000-7f0de8255000 r--p 001de000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0 7f0de8255000-7f0de8291000 rw-p 001e2000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0 $ Signed-off-by: Jaroslav Škarvada <jskarvad@redhat.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> LPU-Reference: 20180119205641.24242-1-jskarvad@redhat.com Link: https://lkml.kernel.org/n/tip-8d7dt9kqp83vsz25hagug8fu@git.kernel.org [ Removed explicit check for python version, allowing it to really build with python3 ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-01-19 21:56:41 +01:00
#else
PyMODINIT_FUNC PyInit_perf(void);
#endif
perf tools: Initial python binding First clarifying that this kind of binding is not a replacement or an equivalent to the 'perf script' way of using python with perf. The 'perf script' way is to process events and look at a given script for some python function that matches the events to pass each event for processing. This is a python module, i.e. everything is driven from the python script, that merely uses "import perf" or "from perf import". perf script is focused on tracepoints, this binding is focused on profiling as an initial target. More work is needed to make available tracepoint specific variables as event variables accessible via this binding. There is one example of such usage model, in tools/perf/python/twatch.py, a tool to watch "cycles" events together with task (fork, exit) and comm perf events. For now, due to me not being able to grok how python distutils cope with building C extensions outside the sources dir the install target just builds it, I'm using it as: [root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/ [root@emilia linux]# tools/perf/python/twatch.py cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: } cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: } cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: } cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: } cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: } cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: } cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: } cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534} cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls } cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024} The first 8 mmap events in this 8 way machine are a mistery that is still being investigated. More of the tools/perf/util/ APIs will be exposed via this python binding as the need arises. For now the focus is on creating events and processing them, symbol resolution is an obvious next step, with tracepoint variables as a close second step. Cc: Clark Williams <williams@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
#define member_def(type, member, ptype, help) \
{ #member, ptype, \
offsetof(struct pyrf_event, event) + offsetof(struct type, member), \
0, help }
#define sample_member_def(name, member, ptype, help) \
{ #name, ptype, \
offsetof(struct pyrf_event, sample) + offsetof(struct perf_sample, member), \
0, help }
struct pyrf_event {
PyObject_HEAD
struct evsel *evsel;
perf tools: Initial python binding First clarifying that this kind of binding is not a replacement or an equivalent to the 'perf script' way of using python with perf. The 'perf script' way is to process events and look at a given script for some python function that matches the events to pass each event for processing. This is a python module, i.e. everything is driven from the python script, that merely uses "import perf" or "from perf import". perf script is focused on tracepoints, this binding is focused on profiling as an initial target. More work is needed to make available tracepoint specific variables as event variables accessible via this binding. There is one example of such usage model, in tools/perf/python/twatch.py, a tool to watch "cycles" events together with task (fork, exit) and comm perf events. For now, due to me not being able to grok how python distutils cope with building C extensions outside the sources dir the install target just builds it, I'm using it as: [root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/ [root@emilia linux]# tools/perf/python/twatch.py cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: } cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: } cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: } cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: } cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: } cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: } cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: } cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534} cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls } cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024} The first 8 mmap events in this 8 way machine are a mistery that is still being investigated. More of the tools/perf/util/ APIs will be exposed via this python binding as the need arises. For now the focus is on creating events and processing them, symbol resolution is an obvious next step, with tracepoint variables as a close second step. Cc: Clark Williams <williams@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
struct perf_sample sample;
union perf_event event;
};
#define sample_members \
sample_member_def(sample_ip, ip, T_ULONGLONG, "event type"), \
perf tools: Initial python binding First clarifying that this kind of binding is not a replacement or an equivalent to the 'perf script' way of using python with perf. The 'perf script' way is to process events and look at a given script for some python function that matches the events to pass each event for processing. This is a python module, i.e. everything is driven from the python script, that merely uses "import perf" or "from perf import". perf script is focused on tracepoints, this binding is focused on profiling as an initial target. More work is needed to make available tracepoint specific variables as event variables accessible via this binding. There is one example of such usage model, in tools/perf/python/twatch.py, a tool to watch "cycles" events together with task (fork, exit) and comm perf events. For now, due to me not being able to grok how python distutils cope with building C extensions outside the sources dir the install target just builds it, I'm using it as: [root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/ [root@emilia linux]# tools/perf/python/twatch.py cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: } cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: } cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: } cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: } cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: } cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: } cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: } cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534} cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls } cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024} The first 8 mmap events in this 8 way machine are a mistery that is still being investigated. More of the tools/perf/util/ APIs will be exposed via this python binding as the need arises. For now the focus is on creating events and processing them, symbol resolution is an obvious next step, with tracepoint variables as a close second step. Cc: Clark Williams <williams@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
sample_member_def(sample_pid, pid, T_INT, "event pid"), \
sample_member_def(sample_tid, tid, T_INT, "event tid"), \
sample_member_def(sample_time, time, T_ULONGLONG, "event timestamp"), \
sample_member_def(sample_addr, addr, T_ULONGLONG, "event addr"), \
sample_member_def(sample_id, id, T_ULONGLONG, "event id"), \
sample_member_def(sample_stream_id, stream_id, T_ULONGLONG, "event stream id"), \
sample_member_def(sample_period, period, T_ULONGLONG, "event period"), \
perf tools: Initial python binding First clarifying that this kind of binding is not a replacement or an equivalent to the 'perf script' way of using python with perf. The 'perf script' way is to process events and look at a given script for some python function that matches the events to pass each event for processing. This is a python module, i.e. everything is driven from the python script, that merely uses "import perf" or "from perf import". perf script is focused on tracepoints, this binding is focused on profiling as an initial target. More work is needed to make available tracepoint specific variables as event variables accessible via this binding. There is one example of such usage model, in tools/perf/python/twatch.py, a tool to watch "cycles" events together with task (fork, exit) and comm perf events. For now, due to me not being able to grok how python distutils cope with building C extensions outside the sources dir the install target just builds it, I'm using it as: [root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/ [root@emilia linux]# tools/perf/python/twatch.py cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: } cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: } cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: } cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: } cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: } cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: } cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: } cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534} cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls } cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024} The first 8 mmap events in this 8 way machine are a mistery that is still being investigated. More of the tools/perf/util/ APIs will be exposed via this python binding as the need arises. For now the focus is on creating events and processing them, symbol resolution is an obvious next step, with tracepoint variables as a close second step. Cc: Clark Williams <williams@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
sample_member_def(sample_cpu, cpu, T_UINT, "event cpu"),
static char pyrf_mmap_event__doc[] = PyDoc_STR("perf mmap event object.");
static PyMemberDef pyrf_mmap_event__members[] = {
sample_members
member_def(perf_event_header, type, T_UINT, "event type"),
perf python: Support the PERF_RECORD_SWITCH event To test it check tools/perf/python/twatch.py, after following the instructions there to enable context_switch, output looks like: [root@zoo linux]# tools/perf/python/twatch.py cpu: 1, pid: 31463, tid: 31463 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31463, switch_out: 0 } cpu: 2, pid: 31463, tid: 31496 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31496, switch_out: 0 } cpu: 2, pid: 31463, tid: 31496 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31496, switch_out: 1 } cpu: 3, pid: 31463, tid: 31527 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31527, switch_out: 0 } cpu: 1, pid: 31463, tid: 31463 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31463, switch_out: 1 } cpu: 3, pid: 31463, tid: 31527 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31527, switch_out: 1 } cpu: 1, pid: 31463, tid: 31463 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31463, switch_out: 0 } ^CTraceback (most recent call last): File "tools/perf/python/twatch.py", line 67, in <module> main(context_switch = 1, thread = 31463) File "tools/perf/python/twatch.py", line 40, in main evlist.poll(timeout = -1) KeyboardInterrupt [root@zoo linux]# Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Guy Streeter <streeter@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-1ukistmpamc5z717k80ctcp2@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-10-06 17:46:46 -03:00
member_def(perf_event_header, misc, T_UINT, "event misc"),
member_def(perf_record_mmap, pid, T_UINT, "event pid"),
member_def(perf_record_mmap, tid, T_UINT, "event tid"),
member_def(perf_record_mmap, start, T_ULONGLONG, "start of the map"),
member_def(perf_record_mmap, len, T_ULONGLONG, "map length"),
member_def(perf_record_mmap, pgoff, T_ULONGLONG, "page offset"),
member_def(perf_record_mmap, filename, T_STRING_INPLACE, "backing store"),
{ .name = NULL, },
perf tools: Initial python binding First clarifying that this kind of binding is not a replacement or an equivalent to the 'perf script' way of using python with perf. The 'perf script' way is to process events and look at a given script for some python function that matches the events to pass each event for processing. This is a python module, i.e. everything is driven from the python script, that merely uses "import perf" or "from perf import". perf script is focused on tracepoints, this binding is focused on profiling as an initial target. More work is needed to make available tracepoint specific variables as event variables accessible via this binding. There is one example of such usage model, in tools/perf/python/twatch.py, a tool to watch "cycles" events together with task (fork, exit) and comm perf events. For now, due to me not being able to grok how python distutils cope with building C extensions outside the sources dir the install target just builds it, I'm using it as: [root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/ [root@emilia linux]# tools/perf/python/twatch.py cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: } cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: } cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: } cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: } cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: } cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: } cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: } cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534} cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls } cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024} The first 8 mmap events in this 8 way machine are a mistery that is still being investigated. More of the tools/perf/util/ APIs will be exposed via this python binding as the need arises. For now the focus is on creating events and processing them, symbol resolution is an obvious next step, with tracepoint variables as a close second step. Cc: Clark Williams <williams@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
};
static PyObject *pyrf_mmap_event__repr(struct pyrf_event *pevent)
{
PyObject *ret;
char *s;
if (asprintf(&s, "{ type: mmap, pid: %u, tid: %u, start: %#" PRI_lx64 ", "
"length: %#" PRI_lx64 ", offset: %#" PRI_lx64 ", "
perf tools: Initial python binding First clarifying that this kind of binding is not a replacement or an equivalent to the 'perf script' way of using python with perf. The 'perf script' way is to process events and look at a given script for some python function that matches the events to pass each event for processing. This is a python module, i.e. everything is driven from the python script, that merely uses "import perf" or "from perf import". perf script is focused on tracepoints, this binding is focused on profiling as an initial target. More work is needed to make available tracepoint specific variables as event variables accessible via this binding. There is one example of such usage model, in tools/perf/python/twatch.py, a tool to watch "cycles" events together with task (fork, exit) and comm perf events. For now, due to me not being able to grok how python distutils cope with building C extensions outside the sources dir the install target just builds it, I'm using it as: [root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/ [root@emilia linux]# tools/perf/python/twatch.py cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: } cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: } cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: } cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: } cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: } cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: } cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: } cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534} cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls } cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024} The first 8 mmap events in this 8 way machine are a mistery that is still being investigated. More of the tools/perf/util/ APIs will be exposed via this python binding as the need arises. For now the focus is on creating events and processing them, symbol resolution is an obvious next step, with tracepoint variables as a close second step. Cc: Clark Williams <williams@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
"filename: %s }",
pevent->event.mmap.pid, pevent->event.mmap.tid,
pevent->event.mmap.start, pevent->event.mmap.len,
pevent->event.mmap.pgoff, pevent->event.mmap.filename) < 0) {
ret = PyErr_NoMemory();
} else {
perf tools: Add Python 3 support Added Python 3 support while keeping Python 2.7 compatibility. Committer notes: This doesn't make it to auto detect python 3, one has to explicitely ask it to build with python 3 devel files, here are the instructions provided by Jaroslav: --- $ cp -a tools/perf tools/python3-perf $ make V=1 prefix=/usr -C tools/perf PYTHON=/usr/bin/python2 all $ make V=1 prefix=/usr -C tools/python3-perf PYTHON=/usr/bin/python3 all $ make V=1 prefix=/usr -C tools/python3-perf PYTHON=/usr/bin/python3 DESTDIR=%{buildroot} install-python_ext $ make V=1 prefix=/usr -C tools/perf PYTHON=/usr/bin/python2 DESTDIR=%{buildroot} install-python_ext --- We need to make this automatic, just like the existing tests for checking if the python2 devel files are in place, allowing the build with python3 if available, fallbacking to python2 and then just disabling it if none are available. So, using the PYTHON variable to build it using O= we get: Before this patch: $ rpm -q python3 python3-devel python3-3.6.4-7.fc27.x86_64 python3-devel-3.6.4-7.fc27.x86_64 $ rm -rf /tmp/build/perf/ ; mkdir -p /tmp/build/perf ; make O=/tmp/build/perf PYTHON=/usr/bin/python3 -C tools/perf install-bin make: Entering directory '/home/acme/git/linux/tools/perf' <SNIP> Makefile.config:670: Python 3 is not yet supported; please set Makefile.config:671: PYTHON and/or PYTHON_CONFIG appropriately. Makefile.config:672: If you also have Python 2 installed, then Makefile.config:673: try something like: Makefile.config:674: Makefile.config:675: make PYTHON=python2 Makefile.config:676: Makefile.config:677: Otherwise, disable Python support entirely: Makefile.config:678: Makefile.config:679: make NO_LIBPYTHON=1 Makefile.config:680: Makefile.config:681: *** . Stop. make[1]: *** [Makefile.perf:212: sub-make] Error 2 make: *** [Makefile:110: install-bin] Error 2 make: Leaving directory '/home/acme/git/linux/tools/perf' $ After: $ make O=/tmp/build/perf PYTHON=python3 -C tools/perf install-bin $ ldd ~/bin/perf | grep python libpython3.6m.so.1.0 => /lib64/libpython3.6m.so.1.0 (0x00007f58a31e8000) $ rpm -qf /lib64/libpython3.6m.so.1.0 python3-libs-3.6.4-7.fc27.x86_64 $ Now verify that when using the binding the right ELF file is loaded, using perf trace: $ perf trace -e open* perf test python 0.051 ( 0.016 ms): perf/3927 openat(dfd: CWD, filename: /etc/ld.so.cache, flags: CLOEXEC ) = 3 <SNIP> 18: 'import perf' in python : 8.849 ( 0.013 ms): sh/3929 openat(dfd: CWD, filename: /etc/ld.so.cache, flags: CLOEXEC ) = 3 <SNIP> 25.572 ( 0.008 ms): python3/3931 openat(dfd: CWD, filename: /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so, flags: CLOEXEC) = 3 <SNIP> Ok <SNIP> $ And using tools/perf/python/twatch.py, to show PERF_RECORD_ metaevents: $ python3 tools/perf/python/twatch.py cpu: 3, pid: 16060, tid: 16060 { type: fork, pid: 5207, ppid: 16060, tid: 5207, ptid: 16060, time: 10798513015459} cpu: 3, pid: 16060, tid: 16060 { type: fork, pid: 5208, ppid: 16060, tid: 5208, ptid: 16060, time: 10798513562503} cpu: 0, pid: 5208, tid: 5208 { type: comm, pid: 5208, tid: 5208, comm: grep } cpu: 2, pid: 5207, tid: 5207 { type: comm, pid: 5207, tid: 5207, comm: ps } cpu: 2, pid: 5207, tid: 5207 { type: exit, pid: 5207, ppid: 5207, tid: 5207, ptid: 5207, time: 10798551337484} cpu: 3, pid: 5208, tid: 5208 { type: exit, pid: 5208, ppid: 5208, tid: 5208, ptid: 5208, time: 10798551292153} cpu: 3, pid: 601, tid: 601 { type: fork, pid: 5209, ppid: 601, tid: 5209, ptid: 601, time: 10801779977324} ^CTraceback (most recent call last): File "tools/perf/python/twatch.py", line 68, in <module> main() File "tools/perf/python/twatch.py", line 40, in main evlist.poll(timeout = -1) KeyboardInterrupt $ # ps ax|grep twatch 5197 pts/8 S+ 0:00 python3 tools/perf/python/twatch.py # ls -la /proc/5197/smaps -r--r--r--. 1 acme acme 0 Feb 19 13:14 /proc/5197/smaps # grep python /proc/5197/smaps 558111307000-558111309000 r-xp 00000000 fd:00 3151710 /usr/bin/python3.6 558111508000-558111509000 r--p 00001000 fd:00 3151710 /usr/bin/python3.6 558111509000-55811150a000 rw-p 00002000 fd:00 3151710 /usr/bin/python3.6 7ffad6fc1000-7ffad7008000 r-xp 00000000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so 7ffad7008000-7ffad7207000 ---p 00047000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so 7ffad7207000-7ffad7208000 r--p 00046000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so 7ffad7208000-7ffad7215000 rw-p 00047000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so 7ffadea77000-7ffaded3d000 r-xp 00000000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0 7ffaded3d000-7ffadef3c000 ---p 002c6000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0 7ffadef3c000-7ffadef42000 r--p 002c5000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0 7ffadef42000-7ffadefa5000 rw-p 002cb000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0 # And with this patch, but building normally, without specifying the PYTHON=python3 part, which will make it use python2 if its devel files are available, like in this test: $ make O=/tmp/build/perf -C tools/perf install-bin $ ldd ~/bin/perf | grep python libpython2.7.so.1.0 => /lib64/libpython2.7.so.1.0 (0x00007f6a44410000) $ ldd /tmp/build/perf/python_ext_build/lib/perf.so | grep python libpython2.7.so.1.0 => /lib64/libpython2.7.so.1.0 (0x00007fed28a2c000) $ [acme@jouet perf]$ tools/perf/python/twatch.py cpu: 0, pid: 2817, tid: 2817 { type: fork, pid: 2817, ppid: 2817, tid: 8910, ptid: 2817, time: 11126454335306} cpu: 0, pid: 2817, tid: 2817 { type: comm, pid: 2817, tid: 8910, comm: worker } $ ps ax | grep twatch.py 8909 pts/8 S+ 0:00 /usr/bin/python tools/perf/python/twatch.py $ grep python /proc/8909/smaps 5579de658000-5579de659000 r-xp 00000000 fd:00 3156044 /usr/bin/python2.7 5579de858000-5579de859000 r--p 00000000 fd:00 3156044 /usr/bin/python2.7 5579de859000-5579de85a000 rw-p 00001000 fd:00 3156044 /usr/bin/python2.7 7f0de01f7000-7f0de023e000 r-xp 00000000 00:2d 230695 /tmp/build/perf/python/perf.so 7f0de023e000-7f0de043d000 ---p 00047000 00:2d 230695 /tmp/build/perf/python/perf.so 7f0de043d000-7f0de043e000 r--p 00046000 00:2d 230695 /tmp/build/perf/python/perf.so 7f0de043e000-7f0de044b000 rw-p 00047000 00:2d 230695 /tmp/build/perf/python/perf.so 7f0de6f0f000-7f0de6f13000 r-xp 00000000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so 7f0de6f13000-7f0de7113000 ---p 00004000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so 7f0de7113000-7f0de7114000 r--p 00004000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so 7f0de7114000-7f0de7115000 rw-p 00005000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so 7f0de7e73000-7f0de8052000 r-xp 00000000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0 7f0de8052000-7f0de8251000 ---p 001df000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0 7f0de8251000-7f0de8255000 r--p 001de000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0 7f0de8255000-7f0de8291000 rw-p 001e2000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0 $ Signed-off-by: Jaroslav Škarvada <jskarvad@redhat.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> LPU-Reference: 20180119205641.24242-1-jskarvad@redhat.com Link: https://lkml.kernel.org/n/tip-8d7dt9kqp83vsz25hagug8fu@git.kernel.org [ Removed explicit check for python version, allowing it to really build with python3 ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-01-19 21:56:41 +01:00
ret = _PyUnicode_FromString(s);
perf tools: Initial python binding First clarifying that this kind of binding is not a replacement or an equivalent to the 'perf script' way of using python with perf. The 'perf script' way is to process events and look at a given script for some python function that matches the events to pass each event for processing. This is a python module, i.e. everything is driven from the python script, that merely uses "import perf" or "from perf import". perf script is focused on tracepoints, this binding is focused on profiling as an initial target. More work is needed to make available tracepoint specific variables as event variables accessible via this binding. There is one example of such usage model, in tools/perf/python/twatch.py, a tool to watch "cycles" events together with task (fork, exit) and comm perf events. For now, due to me not being able to grok how python distutils cope with building C extensions outside the sources dir the install target just builds it, I'm using it as: [root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/ [root@emilia linux]# tools/perf/python/twatch.py cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: } cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: } cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: } cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: } cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: } cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: } cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: } cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534} cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls } cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024} The first 8 mmap events in this 8 way machine are a mistery that is still being investigated. More of the tools/perf/util/ APIs will be exposed via this python binding as the need arises. For now the focus is on creating events and processing them, symbol resolution is an obvious next step, with tracepoint variables as a close second step. Cc: Clark Williams <williams@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
free(s);
}
return ret;
}
static PyTypeObject pyrf_mmap_event__type = {
PyVarObject_HEAD_INIT(NULL, 0)
.tp_name = "perf.mmap_event",
.tp_basicsize = sizeof(struct pyrf_event),
.tp_flags = Py_TPFLAGS_DEFAULT|Py_TPFLAGS_BASETYPE,
.tp_doc = pyrf_mmap_event__doc,
.tp_members = pyrf_mmap_event__members,
.tp_repr = (reprfunc)pyrf_mmap_event__repr,
};
static char pyrf_task_event__doc[] = PyDoc_STR("perf task (fork/exit) event object.");
static PyMemberDef pyrf_task_event__members[] = {
sample_members
member_def(perf_event_header, type, T_UINT, "event type"),
member_def(perf_record_fork, pid, T_UINT, "event pid"),
member_def(perf_record_fork, ppid, T_UINT, "event ppid"),
member_def(perf_record_fork, tid, T_UINT, "event tid"),
member_def(perf_record_fork, ptid, T_UINT, "event ptid"),
member_def(perf_record_fork, time, T_ULONGLONG, "timestamp"),
{ .name = NULL, },
perf tools: Initial python binding First clarifying that this kind of binding is not a replacement or an equivalent to the 'perf script' way of using python with perf. The 'perf script' way is to process events and look at a given script for some python function that matches the events to pass each event for processing. This is a python module, i.e. everything is driven from the python script, that merely uses "import perf" or "from perf import". perf script is focused on tracepoints, this binding is focused on profiling as an initial target. More work is needed to make available tracepoint specific variables as event variables accessible via this binding. There is one example of such usage model, in tools/perf/python/twatch.py, a tool to watch "cycles" events together with task (fork, exit) and comm perf events. For now, due to me not being able to grok how python distutils cope with building C extensions outside the sources dir the install target just builds it, I'm using it as: [root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/ [root@emilia linux]# tools/perf/python/twatch.py cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: } cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: } cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: } cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: } cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: } cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: } cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: } cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534} cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls } cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024} The first 8 mmap events in this 8 way machine are a mistery that is still being investigated. More of the tools/perf/util/ APIs will be exposed via this python binding as the need arises. For now the focus is on creating events and processing them, symbol resolution is an obvious next step, with tracepoint variables as a close second step. Cc: Clark Williams <williams@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
};
static PyObject *pyrf_task_event__repr(struct pyrf_event *pevent)
{
perf tools: Add Python 3 support Added Python 3 support while keeping Python 2.7 compatibility. Committer notes: This doesn't make it to auto detect python 3, one has to explicitely ask it to build with python 3 devel files, here are the instructions provided by Jaroslav: --- $ cp -a tools/perf tools/python3-perf $ make V=1 prefix=/usr -C tools/perf PYTHON=/usr/bin/python2 all $ make V=1 prefix=/usr -C tools/python3-perf PYTHON=/usr/bin/python3 all $ make V=1 prefix=/usr -C tools/python3-perf PYTHON=/usr/bin/python3 DESTDIR=%{buildroot} install-python_ext $ make V=1 prefix=/usr -C tools/perf PYTHON=/usr/bin/python2 DESTDIR=%{buildroot} install-python_ext --- We need to make this automatic, just like the existing tests for checking if the python2 devel files are in place, allowing the build with python3 if available, fallbacking to python2 and then just disabling it if none are available. So, using the PYTHON variable to build it using O= we get: Before this patch: $ rpm -q python3 python3-devel python3-3.6.4-7.fc27.x86_64 python3-devel-3.6.4-7.fc27.x86_64 $ rm -rf /tmp/build/perf/ ; mkdir -p /tmp/build/perf ; make O=/tmp/build/perf PYTHON=/usr/bin/python3 -C tools/perf install-bin make: Entering directory '/home/acme/git/linux/tools/perf' <SNIP> Makefile.config:670: Python 3 is not yet supported; please set Makefile.config:671: PYTHON and/or PYTHON_CONFIG appropriately. Makefile.config:672: If you also have Python 2 installed, then Makefile.config:673: try something like: Makefile.config:674: Makefile.config:675: make PYTHON=python2 Makefile.config:676: Makefile.config:677: Otherwise, disable Python support entirely: Makefile.config:678: Makefile.config:679: make NO_LIBPYTHON=1 Makefile.config:680: Makefile.config:681: *** . Stop. make[1]: *** [Makefile.perf:212: sub-make] Error 2 make: *** [Makefile:110: install-bin] Error 2 make: Leaving directory '/home/acme/git/linux/tools/perf' $ After: $ make O=/tmp/build/perf PYTHON=python3 -C tools/perf install-bin $ ldd ~/bin/perf | grep python libpython3.6m.so.1.0 => /lib64/libpython3.6m.so.1.0 (0x00007f58a31e8000) $ rpm -qf /lib64/libpython3.6m.so.1.0 python3-libs-3.6.4-7.fc27.x86_64 $ Now verify that when using the binding the right ELF file is loaded, using perf trace: $ perf trace -e open* perf test python 0.051 ( 0.016 ms): perf/3927 openat(dfd: CWD, filename: /etc/ld.so.cache, flags: CLOEXEC ) = 3 <SNIP> 18: 'import perf' in python : 8.849 ( 0.013 ms): sh/3929 openat(dfd: CWD, filename: /etc/ld.so.cache, flags: CLOEXEC ) = 3 <SNIP> 25.572 ( 0.008 ms): python3/3931 openat(dfd: CWD, filename: /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so, flags: CLOEXEC) = 3 <SNIP> Ok <SNIP> $ And using tools/perf/python/twatch.py, to show PERF_RECORD_ metaevents: $ python3 tools/perf/python/twatch.py cpu: 3, pid: 16060, tid: 16060 { type: fork, pid: 5207, ppid: 16060, tid: 5207, ptid: 16060, time: 10798513015459} cpu: 3, pid: 16060, tid: 16060 { type: fork, pid: 5208, ppid: 16060, tid: 5208, ptid: 16060, time: 10798513562503} cpu: 0, pid: 5208, tid: 5208 { type: comm, pid: 5208, tid: 5208, comm: grep } cpu: 2, pid: 5207, tid: 5207 { type: comm, pid: 5207, tid: 5207, comm: ps } cpu: 2, pid: 5207, tid: 5207 { type: exit, pid: 5207, ppid: 5207, tid: 5207, ptid: 5207, time: 10798551337484} cpu: 3, pid: 5208, tid: 5208 { type: exit, pid: 5208, ppid: 5208, tid: 5208, ptid: 5208, time: 10798551292153} cpu: 3, pid: 601, tid: 601 { type: fork, pid: 5209, ppid: 601, tid: 5209, ptid: 601, time: 10801779977324} ^CTraceback (most recent call last): File "tools/perf/python/twatch.py", line 68, in <module> main() File "tools/perf/python/twatch.py", line 40, in main evlist.poll(timeout = -1) KeyboardInterrupt $ # ps ax|grep twatch 5197 pts/8 S+ 0:00 python3 tools/perf/python/twatch.py # ls -la /proc/5197/smaps -r--r--r--. 1 acme acme 0 Feb 19 13:14 /proc/5197/smaps # grep python /proc/5197/smaps 558111307000-558111309000 r-xp 00000000 fd:00 3151710 /usr/bin/python3.6 558111508000-558111509000 r--p 00001000 fd:00 3151710 /usr/bin/python3.6 558111509000-55811150a000 rw-p 00002000 fd:00 3151710 /usr/bin/python3.6 7ffad6fc1000-7ffad7008000 r-xp 00000000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so 7ffad7008000-7ffad7207000 ---p 00047000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so 7ffad7207000-7ffad7208000 r--p 00046000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so 7ffad7208000-7ffad7215000 rw-p 00047000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so 7ffadea77000-7ffaded3d000 r-xp 00000000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0 7ffaded3d000-7ffadef3c000 ---p 002c6000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0 7ffadef3c000-7ffadef42000 r--p 002c5000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0 7ffadef42000-7ffadefa5000 rw-p 002cb000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0 # And with this patch, but building normally, without specifying the PYTHON=python3 part, which will make it use python2 if its devel files are available, like in this test: $ make O=/tmp/build/perf -C tools/perf install-bin $ ldd ~/bin/perf | grep python libpython2.7.so.1.0 => /lib64/libpython2.7.so.1.0 (0x00007f6a44410000) $ ldd /tmp/build/perf/python_ext_build/lib/perf.so | grep python libpython2.7.so.1.0 => /lib64/libpython2.7.so.1.0 (0x00007fed28a2c000) $ [acme@jouet perf]$ tools/perf/python/twatch.py cpu: 0, pid: 2817, tid: 2817 { type: fork, pid: 2817, ppid: 2817, tid: 8910, ptid: 2817, time: 11126454335306} cpu: 0, pid: 2817, tid: 2817 { type: comm, pid: 2817, tid: 8910, comm: worker } $ ps ax | grep twatch.py 8909 pts/8 S+ 0:00 /usr/bin/python tools/perf/python/twatch.py $ grep python /proc/8909/smaps 5579de658000-5579de659000 r-xp 00000000 fd:00 3156044 /usr/bin/python2.7 5579de858000-5579de859000 r--p 00000000 fd:00 3156044 /usr/bin/python2.7 5579de859000-5579de85a000 rw-p 00001000 fd:00 3156044 /usr/bin/python2.7 7f0de01f7000-7f0de023e000 r-xp 00000000 00:2d 230695 /tmp/build/perf/python/perf.so 7f0de023e000-7f0de043d000 ---p 00047000 00:2d 230695 /tmp/build/perf/python/perf.so 7f0de043d000-7f0de043e000 r--p 00046000 00:2d 230695 /tmp/build/perf/python/perf.so 7f0de043e000-7f0de044b000 rw-p 00047000 00:2d 230695 /tmp/build/perf/python/perf.so 7f0de6f0f000-7f0de6f13000 r-xp 00000000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so 7f0de6f13000-7f0de7113000 ---p 00004000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so 7f0de7113000-7f0de7114000 r--p 00004000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so 7f0de7114000-7f0de7115000 rw-p 00005000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so 7f0de7e73000-7f0de8052000 r-xp 00000000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0 7f0de8052000-7f0de8251000 ---p 001df000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0 7f0de8251000-7f0de8255000 r--p 001de000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0 7f0de8255000-7f0de8291000 rw-p 001e2000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0 $ Signed-off-by: Jaroslav Škarvada <jskarvad@redhat.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> LPU-Reference: 20180119205641.24242-1-jskarvad@redhat.com Link: https://lkml.kernel.org/n/tip-8d7dt9kqp83vsz25hagug8fu@git.kernel.org [ Removed explicit check for python version, allowing it to really build with python3 ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-01-19 21:56:41 +01:00
return _PyUnicode_FromFormat("{ type: %s, pid: %u, ppid: %u, tid: %u, "
"ptid: %u, time: %" PRI_lu64 "}",
perf tools: Initial python binding First clarifying that this kind of binding is not a replacement or an equivalent to the 'perf script' way of using python with perf. The 'perf script' way is to process events and look at a given script for some python function that matches the events to pass each event for processing. This is a python module, i.e. everything is driven from the python script, that merely uses "import perf" or "from perf import". perf script is focused on tracepoints, this binding is focused on profiling as an initial target. More work is needed to make available tracepoint specific variables as event variables accessible via this binding. There is one example of such usage model, in tools/perf/python/twatch.py, a tool to watch "cycles" events together with task (fork, exit) and comm perf events. For now, due to me not being able to grok how python distutils cope with building C extensions outside the sources dir the install target just builds it, I'm using it as: [root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/ [root@emilia linux]# tools/perf/python/twatch.py cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: } cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: } cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: } cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: } cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: } cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: } cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: } cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534} cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls } cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024} The first 8 mmap events in this 8 way machine are a mistery that is still being investigated. More of the tools/perf/util/ APIs will be exposed via this python binding as the need arises. For now the focus is on creating events and processing them, symbol resolution is an obvious next step, with tracepoint variables as a close second step. Cc: Clark Williams <williams@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
pevent->event.header.type == PERF_RECORD_FORK ? "fork" : "exit",
pevent->event.fork.pid,
pevent->event.fork.ppid,
pevent->event.fork.tid,
pevent->event.fork.ptid,
pevent->event.fork.time);
}
static PyTypeObject pyrf_task_event__type = {
PyVarObject_HEAD_INIT(NULL, 0)
.tp_name = "perf.task_event",
.tp_basicsize = sizeof(struct pyrf_event),
.tp_flags = Py_TPFLAGS_DEFAULT|Py_TPFLAGS_BASETYPE,
.tp_doc = pyrf_task_event__doc,
.tp_members = pyrf_task_event__members,
.tp_repr = (reprfunc)pyrf_task_event__repr,
};
static char pyrf_comm_event__doc[] = PyDoc_STR("perf comm event object.");
static PyMemberDef pyrf_comm_event__members[] = {
sample_members
member_def(perf_event_header, type, T_UINT, "event type"),
member_def(perf_record_comm, pid, T_UINT, "event pid"),
member_def(perf_record_comm, tid, T_UINT, "event tid"),
member_def(perf_record_comm, comm, T_STRING_INPLACE, "process name"),
{ .name = NULL, },
perf tools: Initial python binding First clarifying that this kind of binding is not a replacement or an equivalent to the 'perf script' way of using python with perf. The 'perf script' way is to process events and look at a given script for some python function that matches the events to pass each event for processing. This is a python module, i.e. everything is driven from the python script, that merely uses "import perf" or "from perf import". perf script is focused on tracepoints, this binding is focused on profiling as an initial target. More work is needed to make available tracepoint specific variables as event variables accessible via this binding. There is one example of such usage model, in tools/perf/python/twatch.py, a tool to watch "cycles" events together with task (fork, exit) and comm perf events. For now, due to me not being able to grok how python distutils cope with building C extensions outside the sources dir the install target just builds it, I'm using it as: [root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/ [root@emilia linux]# tools/perf/python/twatch.py cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: } cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: } cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: } cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: } cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: } cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: } cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: } cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534} cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls } cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024} The first 8 mmap events in this 8 way machine are a mistery that is still being investigated. More of the tools/perf/util/ APIs will be exposed via this python binding as the need arises. For now the focus is on creating events and processing them, symbol resolution is an obvious next step, with tracepoint variables as a close second step. Cc: Clark Williams <williams@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
};
static PyObject *pyrf_comm_event__repr(struct pyrf_event *pevent)
{
perf tools: Add Python 3 support Added Python 3 support while keeping Python 2.7 compatibility. Committer notes: This doesn't make it to auto detect python 3, one has to explicitely ask it to build with python 3 devel files, here are the instructions provided by Jaroslav: --- $ cp -a tools/perf tools/python3-perf $ make V=1 prefix=/usr -C tools/perf PYTHON=/usr/bin/python2 all $ make V=1 prefix=/usr -C tools/python3-perf PYTHON=/usr/bin/python3 all $ make V=1 prefix=/usr -C tools/python3-perf PYTHON=/usr/bin/python3 DESTDIR=%{buildroot} install-python_ext $ make V=1 prefix=/usr -C tools/perf PYTHON=/usr/bin/python2 DESTDIR=%{buildroot} install-python_ext --- We need to make this automatic, just like the existing tests for checking if the python2 devel files are in place, allowing the build with python3 if available, fallbacking to python2 and then just disabling it if none are available. So, using the PYTHON variable to build it using O= we get: Before this patch: $ rpm -q python3 python3-devel python3-3.6.4-7.fc27.x86_64 python3-devel-3.6.4-7.fc27.x86_64 $ rm -rf /tmp/build/perf/ ; mkdir -p /tmp/build/perf ; make O=/tmp/build/perf PYTHON=/usr/bin/python3 -C tools/perf install-bin make: Entering directory '/home/acme/git/linux/tools/perf' <SNIP> Makefile.config:670: Python 3 is not yet supported; please set Makefile.config:671: PYTHON and/or PYTHON_CONFIG appropriately. Makefile.config:672: If you also have Python 2 installed, then Makefile.config:673: try something like: Makefile.config:674: Makefile.config:675: make PYTHON=python2 Makefile.config:676: Makefile.config:677: Otherwise, disable Python support entirely: Makefile.config:678: Makefile.config:679: make NO_LIBPYTHON=1 Makefile.config:680: Makefile.config:681: *** . Stop. make[1]: *** [Makefile.perf:212: sub-make] Error 2 make: *** [Makefile:110: install-bin] Error 2 make: Leaving directory '/home/acme/git/linux/tools/perf' $ After: $ make O=/tmp/build/perf PYTHON=python3 -C tools/perf install-bin $ ldd ~/bin/perf | grep python libpython3.6m.so.1.0 => /lib64/libpython3.6m.so.1.0 (0x00007f58a31e8000) $ rpm -qf /lib64/libpython3.6m.so.1.0 python3-libs-3.6.4-7.fc27.x86_64 $ Now verify that when using the binding the right ELF file is loaded, using perf trace: $ perf trace -e open* perf test python 0.051 ( 0.016 ms): perf/3927 openat(dfd: CWD, filename: /etc/ld.so.cache, flags: CLOEXEC ) = 3 <SNIP> 18: 'import perf' in python : 8.849 ( 0.013 ms): sh/3929 openat(dfd: CWD, filename: /etc/ld.so.cache, flags: CLOEXEC ) = 3 <SNIP> 25.572 ( 0.008 ms): python3/3931 openat(dfd: CWD, filename: /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so, flags: CLOEXEC) = 3 <SNIP> Ok <SNIP> $ And using tools/perf/python/twatch.py, to show PERF_RECORD_ metaevents: $ python3 tools/perf/python/twatch.py cpu: 3, pid: 16060, tid: 16060 { type: fork, pid: 5207, ppid: 16060, tid: 5207, ptid: 16060, time: 10798513015459} cpu: 3, pid: 16060, tid: 16060 { type: fork, pid: 5208, ppid: 16060, tid: 5208, ptid: 16060, time: 10798513562503} cpu: 0, pid: 5208, tid: 5208 { type: comm, pid: 5208, tid: 5208, comm: grep } cpu: 2, pid: 5207, tid: 5207 { type: comm, pid: 5207, tid: 5207, comm: ps } cpu: 2, pid: 5207, tid: 5207 { type: exit, pid: 5207, ppid: 5207, tid: 5207, ptid: 5207, time: 10798551337484} cpu: 3, pid: 5208, tid: 5208 { type: exit, pid: 5208, ppid: 5208, tid: 5208, ptid: 5208, time: 10798551292153} cpu: 3, pid: 601, tid: 601 { type: fork, pid: 5209, ppid: 601, tid: 5209, ptid: 601, time: 10801779977324} ^CTraceback (most recent call last): File "tools/perf/python/twatch.py", line 68, in <module> main() File "tools/perf/python/twatch.py", line 40, in main evlist.poll(timeout = -1) KeyboardInterrupt $ # ps ax|grep twatch 5197 pts/8 S+ 0:00 python3 tools/perf/python/twatch.py # ls -la /proc/5197/smaps -r--r--r--. 1 acme acme 0 Feb 19 13:14 /proc/5197/smaps # grep python /proc/5197/smaps 558111307000-558111309000 r-xp 00000000 fd:00 3151710 /usr/bin/python3.6 558111508000-558111509000 r--p 00001000 fd:00 3151710 /usr/bin/python3.6 558111509000-55811150a000 rw-p 00002000 fd:00 3151710 /usr/bin/python3.6 7ffad6fc1000-7ffad7008000 r-xp 00000000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so 7ffad7008000-7ffad7207000 ---p 00047000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so 7ffad7207000-7ffad7208000 r--p 00046000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so 7ffad7208000-7ffad7215000 rw-p 00047000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so 7ffadea77000-7ffaded3d000 r-xp 00000000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0 7ffaded3d000-7ffadef3c000 ---p 002c6000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0 7ffadef3c000-7ffadef42000 r--p 002c5000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0 7ffadef42000-7ffadefa5000 rw-p 002cb000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0 # And with this patch, but building normally, without specifying the PYTHON=python3 part, which will make it use python2 if its devel files are available, like in this test: $ make O=/tmp/build/perf -C tools/perf install-bin $ ldd ~/bin/perf | grep python libpython2.7.so.1.0 => /lib64/libpython2.7.so.1.0 (0x00007f6a44410000) $ ldd /tmp/build/perf/python_ext_build/lib/perf.so | grep python libpython2.7.so.1.0 => /lib64/libpython2.7.so.1.0 (0x00007fed28a2c000) $ [acme@jouet perf]$ tools/perf/python/twatch.py cpu: 0, pid: 2817, tid: 2817 { type: fork, pid: 2817, ppid: 2817, tid: 8910, ptid: 2817, time: 11126454335306} cpu: 0, pid: 2817, tid: 2817 { type: comm, pid: 2817, tid: 8910, comm: worker } $ ps ax | grep twatch.py 8909 pts/8 S+ 0:00 /usr/bin/python tools/perf/python/twatch.py $ grep python /proc/8909/smaps 5579de658000-5579de659000 r-xp 00000000 fd:00 3156044 /usr/bin/python2.7 5579de858000-5579de859000 r--p 00000000 fd:00 3156044 /usr/bin/python2.7 5579de859000-5579de85a000 rw-p 00001000 fd:00 3156044 /usr/bin/python2.7 7f0de01f7000-7f0de023e000 r-xp 00000000 00:2d 230695 /tmp/build/perf/python/perf.so 7f0de023e000-7f0de043d000 ---p 00047000 00:2d 230695 /tmp/build/perf/python/perf.so 7f0de043d000-7f0de043e000 r--p 00046000 00:2d 230695 /tmp/build/perf/python/perf.so 7f0de043e000-7f0de044b000 rw-p 00047000 00:2d 230695 /tmp/build/perf/python/perf.so 7f0de6f0f000-7f0de6f13000 r-xp 00000000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so 7f0de6f13000-7f0de7113000 ---p 00004000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so 7f0de7113000-7f0de7114000 r--p 00004000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so 7f0de7114000-7f0de7115000 rw-p 00005000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so 7f0de7e73000-7f0de8052000 r-xp 00000000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0 7f0de8052000-7f0de8251000 ---p 001df000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0 7f0de8251000-7f0de8255000 r--p 001de000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0 7f0de8255000-7f0de8291000 rw-p 001e2000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0 $ Signed-off-by: Jaroslav Škarvada <jskarvad@redhat.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> LPU-Reference: 20180119205641.24242-1-jskarvad@redhat.com Link: https://lkml.kernel.org/n/tip-8d7dt9kqp83vsz25hagug8fu@git.kernel.org [ Removed explicit check for python version, allowing it to really build with python3 ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-01-19 21:56:41 +01:00
return _PyUnicode_FromFormat("{ type: comm, pid: %u, tid: %u, comm: %s }",
perf tools: Initial python binding First clarifying that this kind of binding is not a replacement or an equivalent to the 'perf script' way of using python with perf. The 'perf script' way is to process events and look at a given script for some python function that matches the events to pass each event for processing. This is a python module, i.e. everything is driven from the python script, that merely uses "import perf" or "from perf import". perf script is focused on tracepoints, this binding is focused on profiling as an initial target. More work is needed to make available tracepoint specific variables as event variables accessible via this binding. There is one example of such usage model, in tools/perf/python/twatch.py, a tool to watch "cycles" events together with task (fork, exit) and comm perf events. For now, due to me not being able to grok how python distutils cope with building C extensions outside the sources dir the install target just builds it, I'm using it as: [root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/ [root@emilia linux]# tools/perf/python/twatch.py cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: } cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: } cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: } cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: } cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: } cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: } cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: } cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534} cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls } cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024} The first 8 mmap events in this 8 way machine are a mistery that is still being investigated. More of the tools/perf/util/ APIs will be exposed via this python binding as the need arises. For now the focus is on creating events and processing them, symbol resolution is an obvious next step, with tracepoint variables as a close second step. Cc: Clark Williams <williams@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
pevent->event.comm.pid,
pevent->event.comm.tid,
pevent->event.comm.comm);
}
static PyTypeObject pyrf_comm_event__type = {
PyVarObject_HEAD_INIT(NULL, 0)
.tp_name = "perf.comm_event",
.tp_basicsize = sizeof(struct pyrf_event),
.tp_flags = Py_TPFLAGS_DEFAULT|Py_TPFLAGS_BASETYPE,
.tp_doc = pyrf_comm_event__doc,
.tp_members = pyrf_comm_event__members,
.tp_repr = (reprfunc)pyrf_comm_event__repr,
};
static char pyrf_throttle_event__doc[] = PyDoc_STR("perf throttle event object.");
static PyMemberDef pyrf_throttle_event__members[] = {
sample_members
member_def(perf_event_header, type, T_UINT, "event type"),
member_def(perf_record_throttle, time, T_ULONGLONG, "timestamp"),
member_def(perf_record_throttle, id, T_ULONGLONG, "event id"),
member_def(perf_record_throttle, stream_id, T_ULONGLONG, "event stream id"),
{ .name = NULL, },
perf tools: Initial python binding First clarifying that this kind of binding is not a replacement or an equivalent to the 'perf script' way of using python with perf. The 'perf script' way is to process events and look at a given script for some python function that matches the events to pass each event for processing. This is a python module, i.e. everything is driven from the python script, that merely uses "import perf" or "from perf import". perf script is focused on tracepoints, this binding is focused on profiling as an initial target. More work is needed to make available tracepoint specific variables as event variables accessible via this binding. There is one example of such usage model, in tools/perf/python/twatch.py, a tool to watch "cycles" events together with task (fork, exit) and comm perf events. For now, due to me not being able to grok how python distutils cope with building C extensions outside the sources dir the install target just builds it, I'm using it as: [root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/ [root@emilia linux]# tools/perf/python/twatch.py cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: } cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: } cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: } cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: } cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: } cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: } cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: } cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534} cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls } cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024} The first 8 mmap events in this 8 way machine are a mistery that is still being investigated. More of the tools/perf/util/ APIs will be exposed via this python binding as the need arises. For now the focus is on creating events and processing them, symbol resolution is an obvious next step, with tracepoint variables as a close second step. Cc: Clark Williams <williams@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
};
static PyObject *pyrf_throttle_event__repr(struct pyrf_event *pevent)
{
struct perf_record_throttle *te = (struct perf_record_throttle *)(&pevent->event.header + 1);
perf tools: Initial python binding First clarifying that this kind of binding is not a replacement or an equivalent to the 'perf script' way of using python with perf. The 'perf script' way is to process events and look at a given script for some python function that matches the events to pass each event for processing. This is a python module, i.e. everything is driven from the python script, that merely uses "import perf" or "from perf import". perf script is focused on tracepoints, this binding is focused on profiling as an initial target. More work is needed to make available tracepoint specific variables as event variables accessible via this binding. There is one example of such usage model, in tools/perf/python/twatch.py, a tool to watch "cycles" events together with task (fork, exit) and comm perf events. For now, due to me not being able to grok how python distutils cope with building C extensions outside the sources dir the install target just builds it, I'm using it as: [root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/ [root@emilia linux]# tools/perf/python/twatch.py cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: } cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: } cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: } cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: } cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: } cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: } cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: } cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534} cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls } cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024} The first 8 mmap events in this 8 way machine are a mistery that is still being investigated. More of the tools/perf/util/ APIs will be exposed via this python binding as the need arises. For now the focus is on creating events and processing them, symbol resolution is an obvious next step, with tracepoint variables as a close second step. Cc: Clark Williams <williams@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
return _PyUnicode_FromFormat("{ type: %sthrottle, time: %" PRI_lu64 ", id: %" PRI_lu64
", stream_id: %" PRI_lu64 " }",
perf tools: Initial python binding First clarifying that this kind of binding is not a replacement or an equivalent to the 'perf script' way of using python with perf. The 'perf script' way is to process events and look at a given script for some python function that matches the events to pass each event for processing. This is a python module, i.e. everything is driven from the python script, that merely uses "import perf" or "from perf import". perf script is focused on tracepoints, this binding is focused on profiling as an initial target. More work is needed to make available tracepoint specific variables as event variables accessible via this binding. There is one example of such usage model, in tools/perf/python/twatch.py, a tool to watch "cycles" events together with task (fork, exit) and comm perf events. For now, due to me not being able to grok how python distutils cope with building C extensions outside the sources dir the install target just builds it, I'm using it as: [root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/ [root@emilia linux]# tools/perf/python/twatch.py cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: } cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: } cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: } cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: } cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: } cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: } cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: } cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534} cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls } cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024} The first 8 mmap events in this 8 way machine are a mistery that is still being investigated. More of the tools/perf/util/ APIs will be exposed via this python binding as the need arises. For now the focus is on creating events and processing them, symbol resolution is an obvious next step, with tracepoint variables as a close second step. Cc: Clark Williams <williams@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
pevent->event.header.type == PERF_RECORD_THROTTLE ? "" : "un",
te->time, te->id, te->stream_id);
}
static PyTypeObject pyrf_throttle_event__type = {
PyVarObject_HEAD_INIT(NULL, 0)
.tp_name = "perf.throttle_event",
.tp_basicsize = sizeof(struct pyrf_event),
.tp_flags = Py_TPFLAGS_DEFAULT|Py_TPFLAGS_BASETYPE,
.tp_doc = pyrf_throttle_event__doc,
.tp_members = pyrf_throttle_event__members,
.tp_repr = (reprfunc)pyrf_throttle_event__repr,
};
static char pyrf_lost_event__doc[] = PyDoc_STR("perf lost event object.");
static PyMemberDef pyrf_lost_event__members[] = {
sample_members
member_def(perf_record_lost, id, T_ULONGLONG, "event id"),
member_def(perf_record_lost, lost, T_ULONGLONG, "number of lost events"),
{ .name = NULL, },
};
static PyObject *pyrf_lost_event__repr(struct pyrf_event *pevent)
{
PyObject *ret;
char *s;
if (asprintf(&s, "{ type: lost, id: %#" PRI_lx64 ", "
"lost: %#" PRI_lx64 " }",
pevent->event.lost.id, pevent->event.lost.lost) < 0) {
ret = PyErr_NoMemory();
} else {
perf tools: Add Python 3 support Added Python 3 support while keeping Python 2.7 compatibility. Committer notes: This doesn't make it to auto detect python 3, one has to explicitely ask it to build with python 3 devel files, here are the instructions provided by Jaroslav: --- $ cp -a tools/perf tools/python3-perf $ make V=1 prefix=/usr -C tools/perf PYTHON=/usr/bin/python2 all $ make V=1 prefix=/usr -C tools/python3-perf PYTHON=/usr/bin/python3 all $ make V=1 prefix=/usr -C tools/python3-perf PYTHON=/usr/bin/python3 DESTDIR=%{buildroot} install-python_ext $ make V=1 prefix=/usr -C tools/perf PYTHON=/usr/bin/python2 DESTDIR=%{buildroot} install-python_ext --- We need to make this automatic, just like the existing tests for checking if the python2 devel files are in place, allowing the build with python3 if available, fallbacking to python2 and then just disabling it if none are available. So, using the PYTHON variable to build it using O= we get: Before this patch: $ rpm -q python3 python3-devel python3-3.6.4-7.fc27.x86_64 python3-devel-3.6.4-7.fc27.x86_64 $ rm -rf /tmp/build/perf/ ; mkdir -p /tmp/build/perf ; make O=/tmp/build/perf PYTHON=/usr/bin/python3 -C tools/perf install-bin make: Entering directory '/home/acme/git/linux/tools/perf' <SNIP> Makefile.config:670: Python 3 is not yet supported; please set Makefile.config:671: PYTHON and/or PYTHON_CONFIG appropriately. Makefile.config:672: If you also have Python 2 installed, then Makefile.config:673: try something like: Makefile.config:674: Makefile.config:675: make PYTHON=python2 Makefile.config:676: Makefile.config:677: Otherwise, disable Python support entirely: Makefile.config:678: Makefile.config:679: make NO_LIBPYTHON=1 Makefile.config:680: Makefile.config:681: *** . Stop. make[1]: *** [Makefile.perf:212: sub-make] Error 2 make: *** [Makefile:110: install-bin] Error 2 make: Leaving directory '/home/acme/git/linux/tools/perf' $ After: $ make O=/tmp/build/perf PYTHON=python3 -C tools/perf install-bin $ ldd ~/bin/perf | grep python libpython3.6m.so.1.0 => /lib64/libpython3.6m.so.1.0 (0x00007f58a31e8000) $ rpm -qf /lib64/libpython3.6m.so.1.0 python3-libs-3.6.4-7.fc27.x86_64 $ Now verify that when using the binding the right ELF file is loaded, using perf trace: $ perf trace -e open* perf test python 0.051 ( 0.016 ms): perf/3927 openat(dfd: CWD, filename: /etc/ld.so.cache, flags: CLOEXEC ) = 3 <SNIP> 18: 'import perf' in python : 8.849 ( 0.013 ms): sh/3929 openat(dfd: CWD, filename: /etc/ld.so.cache, flags: CLOEXEC ) = 3 <SNIP> 25.572 ( 0.008 ms): python3/3931 openat(dfd: CWD, filename: /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so, flags: CLOEXEC) = 3 <SNIP> Ok <SNIP> $ And using tools/perf/python/twatch.py, to show PERF_RECORD_ metaevents: $ python3 tools/perf/python/twatch.py cpu: 3, pid: 16060, tid: 16060 { type: fork, pid: 5207, ppid: 16060, tid: 5207, ptid: 16060, time: 10798513015459} cpu: 3, pid: 16060, tid: 16060 { type: fork, pid: 5208, ppid: 16060, tid: 5208, ptid: 16060, time: 10798513562503} cpu: 0, pid: 5208, tid: 5208 { type: comm, pid: 5208, tid: 5208, comm: grep } cpu: 2, pid: 5207, tid: 5207 { type: comm, pid: 5207, tid: 5207, comm: ps } cpu: 2, pid: 5207, tid: 5207 { type: exit, pid: 5207, ppid: 5207, tid: 5207, ptid: 5207, time: 10798551337484} cpu: 3, pid: 5208, tid: 5208 { type: exit, pid: 5208, ppid: 5208, tid: 5208, ptid: 5208, time: 10798551292153} cpu: 3, pid: 601, tid: 601 { type: fork, pid: 5209, ppid: 601, tid: 5209, ptid: 601, time: 10801779977324} ^CTraceback (most recent call last): File "tools/perf/python/twatch.py", line 68, in <module> main() File "tools/perf/python/twatch.py", line 40, in main evlist.poll(timeout = -1) KeyboardInterrupt $ # ps ax|grep twatch 5197 pts/8 S+ 0:00 python3 tools/perf/python/twatch.py # ls -la /proc/5197/smaps -r--r--r--. 1 acme acme 0 Feb 19 13:14 /proc/5197/smaps # grep python /proc/5197/smaps 558111307000-558111309000 r-xp 00000000 fd:00 3151710 /usr/bin/python3.6 558111508000-558111509000 r--p 00001000 fd:00 3151710 /usr/bin/python3.6 558111509000-55811150a000 rw-p 00002000 fd:00 3151710 /usr/bin/python3.6 7ffad6fc1000-7ffad7008000 r-xp 00000000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so 7ffad7008000-7ffad7207000 ---p 00047000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so 7ffad7207000-7ffad7208000 r--p 00046000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so 7ffad7208000-7ffad7215000 rw-p 00047000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so 7ffadea77000-7ffaded3d000 r-xp 00000000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0 7ffaded3d000-7ffadef3c000 ---p 002c6000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0 7ffadef3c000-7ffadef42000 r--p 002c5000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0 7ffadef42000-7ffadefa5000 rw-p 002cb000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0 # And with this patch, but building normally, without specifying the PYTHON=python3 part, which will make it use python2 if its devel files are available, like in this test: $ make O=/tmp/build/perf -C tools/perf install-bin $ ldd ~/bin/perf | grep python libpython2.7.so.1.0 => /lib64/libpython2.7.so.1.0 (0x00007f6a44410000) $ ldd /tmp/build/perf/python_ext_build/lib/perf.so | grep python libpython2.7.so.1.0 => /lib64/libpython2.7.so.1.0 (0x00007fed28a2c000) $ [acme@jouet perf]$ tools/perf/python/twatch.py cpu: 0, pid: 2817, tid: 2817 { type: fork, pid: 2817, ppid: 2817, tid: 8910, ptid: 2817, time: 11126454335306} cpu: 0, pid: 2817, tid: 2817 { type: comm, pid: 2817, tid: 8910, comm: worker } $ ps ax | grep twatch.py 8909 pts/8 S+ 0:00 /usr/bin/python tools/perf/python/twatch.py $ grep python /proc/8909/smaps 5579de658000-5579de659000 r-xp 00000000 fd:00 3156044 /usr/bin/python2.7 5579de858000-5579de859000 r--p 00000000 fd:00 3156044 /usr/bin/python2.7 5579de859000-5579de85a000 rw-p 00001000 fd:00 3156044 /usr/bin/python2.7 7f0de01f7000-7f0de023e000 r-xp 00000000 00:2d 230695 /tmp/build/perf/python/perf.so 7f0de023e000-7f0de043d000 ---p 00047000 00:2d 230695 /tmp/build/perf/python/perf.so 7f0de043d000-7f0de043e000 r--p 00046000 00:2d 230695 /tmp/build/perf/python/perf.so 7f0de043e000-7f0de044b000 rw-p 00047000 00:2d 230695 /tmp/build/perf/python/perf.so 7f0de6f0f000-7f0de6f13000 r-xp 00000000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so 7f0de6f13000-7f0de7113000 ---p 00004000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so 7f0de7113000-7f0de7114000 r--p 00004000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so 7f0de7114000-7f0de7115000 rw-p 00005000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so 7f0de7e73000-7f0de8052000 r-xp 00000000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0 7f0de8052000-7f0de8251000 ---p 001df000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0 7f0de8251000-7f0de8255000 r--p 001de000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0 7f0de8255000-7f0de8291000 rw-p 001e2000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0 $ Signed-off-by: Jaroslav Škarvada <jskarvad@redhat.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> LPU-Reference: 20180119205641.24242-1-jskarvad@redhat.com Link: https://lkml.kernel.org/n/tip-8d7dt9kqp83vsz25hagug8fu@git.kernel.org [ Removed explicit check for python version, allowing it to really build with python3 ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-01-19 21:56:41 +01:00
ret = _PyUnicode_FromString(s);
free(s);
}
return ret;
}
static PyTypeObject pyrf_lost_event__type = {
PyVarObject_HEAD_INIT(NULL, 0)
.tp_name = "perf.lost_event",
.tp_basicsize = sizeof(struct pyrf_event),
.tp_flags = Py_TPFLAGS_DEFAULT|Py_TPFLAGS_BASETYPE,
.tp_doc = pyrf_lost_event__doc,
.tp_members = pyrf_lost_event__members,
.tp_repr = (reprfunc)pyrf_lost_event__repr,
};
static char pyrf_read_event__doc[] = PyDoc_STR("perf read event object.");
static PyMemberDef pyrf_read_event__members[] = {
sample_members
member_def(perf_record_read, pid, T_UINT, "event pid"),
member_def(perf_record_read, tid, T_UINT, "event tid"),
{ .name = NULL, },
};
static PyObject *pyrf_read_event__repr(struct pyrf_event *pevent)
{
perf tools: Add Python 3 support Added Python 3 support while keeping Python 2.7 compatibility. Committer notes: This doesn't make it to auto detect python 3, one has to explicitely ask it to build with python 3 devel files, here are the instructions provided by Jaroslav: --- $ cp -a tools/perf tools/python3-perf $ make V=1 prefix=/usr -C tools/perf PYTHON=/usr/bin/python2 all $ make V=1 prefix=/usr -C tools/python3-perf PYTHON=/usr/bin/python3 all $ make V=1 prefix=/usr -C tools/python3-perf PYTHON=/usr/bin/python3 DESTDIR=%{buildroot} install-python_ext $ make V=1 prefix=/usr -C tools/perf PYTHON=/usr/bin/python2 DESTDIR=%{buildroot} install-python_ext --- We need to make this automatic, just like the existing tests for checking if the python2 devel files are in place, allowing the build with python3 if available, fallbacking to python2 and then just disabling it if none are available. So, using the PYTHON variable to build it using O= we get: Before this patch: $ rpm -q python3 python3-devel python3-3.6.4-7.fc27.x86_64 python3-devel-3.6.4-7.fc27.x86_64 $ rm -rf /tmp/build/perf/ ; mkdir -p /tmp/build/perf ; make O=/tmp/build/perf PYTHON=/usr/bin/python3 -C tools/perf install-bin make: Entering directory '/home/acme/git/linux/tools/perf' <SNIP> Makefile.config:670: Python 3 is not yet supported; please set Makefile.config:671: PYTHON and/or PYTHON_CONFIG appropriately. Makefile.config:672: If you also have Python 2 installed, then Makefile.config:673: try something like: Makefile.config:674: Makefile.config:675: make PYTHON=python2 Makefile.config:676: Makefile.config:677: Otherwise, disable Python support entirely: Makefile.config:678: Makefile.config:679: make NO_LIBPYTHON=1 Makefile.config:680: Makefile.config:681: *** . Stop. make[1]: *** [Makefile.perf:212: sub-make] Error 2 make: *** [Makefile:110: install-bin] Error 2 make: Leaving directory '/home/acme/git/linux/tools/perf' $ After: $ make O=/tmp/build/perf PYTHON=python3 -C tools/perf install-bin $ ldd ~/bin/perf | grep python libpython3.6m.so.1.0 => /lib64/libpython3.6m.so.1.0 (0x00007f58a31e8000) $ rpm -qf /lib64/libpython3.6m.so.1.0 python3-libs-3.6.4-7.fc27.x86_64 $ Now verify that when using the binding the right ELF file is loaded, using perf trace: $ perf trace -e open* perf test python 0.051 ( 0.016 ms): perf/3927 openat(dfd: CWD, filename: /etc/ld.so.cache, flags: CLOEXEC ) = 3 <SNIP> 18: 'import perf' in python : 8.849 ( 0.013 ms): sh/3929 openat(dfd: CWD, filename: /etc/ld.so.cache, flags: CLOEXEC ) = 3 <SNIP> 25.572 ( 0.008 ms): python3/3931 openat(dfd: CWD, filename: /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so, flags: CLOEXEC) = 3 <SNIP> Ok <SNIP> $ And using tools/perf/python/twatch.py, to show PERF_RECORD_ metaevents: $ python3 tools/perf/python/twatch.py cpu: 3, pid: 16060, tid: 16060 { type: fork, pid: 5207, ppid: 16060, tid: 5207, ptid: 16060, time: 10798513015459} cpu: 3, pid: 16060, tid: 16060 { type: fork, pid: 5208, ppid: 16060, tid: 5208, ptid: 16060, time: 10798513562503} cpu: 0, pid: 5208, tid: 5208 { type: comm, pid: 5208, tid: 5208, comm: grep } cpu: 2, pid: 5207, tid: 5207 { type: comm, pid: 5207, tid: 5207, comm: ps } cpu: 2, pid: 5207, tid: 5207 { type: exit, pid: 5207, ppid: 5207, tid: 5207, ptid: 5207, time: 10798551337484} cpu: 3, pid: 5208, tid: 5208 { type: exit, pid: 5208, ppid: 5208, tid: 5208, ptid: 5208, time: 10798551292153} cpu: 3, pid: 601, tid: 601 { type: fork, pid: 5209, ppid: 601, tid: 5209, ptid: 601, time: 10801779977324} ^CTraceback (most recent call last): File "tools/perf/python/twatch.py", line 68, in <module> main() File "tools/perf/python/twatch.py", line 40, in main evlist.poll(timeout = -1) KeyboardInterrupt $ # ps ax|grep twatch 5197 pts/8 S+ 0:00 python3 tools/perf/python/twatch.py # ls -la /proc/5197/smaps -r--r--r--. 1 acme acme 0 Feb 19 13:14 /proc/5197/smaps # grep python /proc/5197/smaps 558111307000-558111309000 r-xp 00000000 fd:00 3151710 /usr/bin/python3.6 558111508000-558111509000 r--p 00001000 fd:00 3151710 /usr/bin/python3.6 558111509000-55811150a000 rw-p 00002000 fd:00 3151710 /usr/bin/python3.6 7ffad6fc1000-7ffad7008000 r-xp 00000000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so 7ffad7008000-7ffad7207000 ---p 00047000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so 7ffad7207000-7ffad7208000 r--p 00046000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so 7ffad7208000-7ffad7215000 rw-p 00047000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so 7ffadea77000-7ffaded3d000 r-xp 00000000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0 7ffaded3d000-7ffadef3c000 ---p 002c6000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0 7ffadef3c000-7ffadef42000 r--p 002c5000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0 7ffadef42000-7ffadefa5000 rw-p 002cb000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0 # And with this patch, but building normally, without specifying the PYTHON=python3 part, which will make it use python2 if its devel files are available, like in this test: $ make O=/tmp/build/perf -C tools/perf install-bin $ ldd ~/bin/perf | grep python libpython2.7.so.1.0 => /lib64/libpython2.7.so.1.0 (0x00007f6a44410000) $ ldd /tmp/build/perf/python_ext_build/lib/perf.so | grep python libpython2.7.so.1.0 => /lib64/libpython2.7.so.1.0 (0x00007fed28a2c000) $ [acme@jouet perf]$ tools/perf/python/twatch.py cpu: 0, pid: 2817, tid: 2817 { type: fork, pid: 2817, ppid: 2817, tid: 8910, ptid: 2817, time: 11126454335306} cpu: 0, pid: 2817, tid: 2817 { type: comm, pid: 2817, tid: 8910, comm: worker } $ ps ax | grep twatch.py 8909 pts/8 S+ 0:00 /usr/bin/python tools/perf/python/twatch.py $ grep python /proc/8909/smaps 5579de658000-5579de659000 r-xp 00000000 fd:00 3156044 /usr/bin/python2.7 5579de858000-5579de859000 r--p 00000000 fd:00 3156044 /usr/bin/python2.7 5579de859000-5579de85a000 rw-p 00001000 fd:00 3156044 /usr/bin/python2.7 7f0de01f7000-7f0de023e000 r-xp 00000000 00:2d 230695 /tmp/build/perf/python/perf.so 7f0de023e000-7f0de043d000 ---p 00047000 00:2d 230695 /tmp/build/perf/python/perf.so 7f0de043d000-7f0de043e000 r--p 00046000 00:2d 230695 /tmp/build/perf/python/perf.so 7f0de043e000-7f0de044b000 rw-p 00047000 00:2d 230695 /tmp/build/perf/python/perf.so 7f0de6f0f000-7f0de6f13000 r-xp 00000000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so 7f0de6f13000-7f0de7113000 ---p 00004000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so 7f0de7113000-7f0de7114000 r--p 00004000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so 7f0de7114000-7f0de7115000 rw-p 00005000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so 7f0de7e73000-7f0de8052000 r-xp 00000000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0 7f0de8052000-7f0de8251000 ---p 001df000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0 7f0de8251000-7f0de8255000 r--p 001de000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0 7f0de8255000-7f0de8291000 rw-p 001e2000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0 $ Signed-off-by: Jaroslav Škarvada <jskarvad@redhat.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> LPU-Reference: 20180119205641.24242-1-jskarvad@redhat.com Link: https://lkml.kernel.org/n/tip-8d7dt9kqp83vsz25hagug8fu@git.kernel.org [ Removed explicit check for python version, allowing it to really build with python3 ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-01-19 21:56:41 +01:00
return _PyUnicode_FromFormat("{ type: read, pid: %u, tid: %u }",
pevent->event.read.pid,
pevent->event.read.tid);
/*
* FIXME: return the array of read values,
* making this method useful ;-)
*/
}
static PyTypeObject pyrf_read_event__type = {
PyVarObject_HEAD_INIT(NULL, 0)
.tp_name = "perf.read_event",
.tp_basicsize = sizeof(struct pyrf_event),
.tp_flags = Py_TPFLAGS_DEFAULT|Py_TPFLAGS_BASETYPE,
.tp_doc = pyrf_read_event__doc,
.tp_members = pyrf_read_event__members,
.tp_repr = (reprfunc)pyrf_read_event__repr,
};
static char pyrf_sample_event__doc[] = PyDoc_STR("perf sample event object.");
static PyMemberDef pyrf_sample_event__members[] = {
sample_members
member_def(perf_event_header, type, T_UINT, "event type"),
{ .name = NULL, },
};
static PyObject *pyrf_sample_event__repr(struct pyrf_event *pevent)
{
PyObject *ret;
char *s;
if (asprintf(&s, "{ type: sample }") < 0) {
ret = PyErr_NoMemory();
} else {
perf tools: Add Python 3 support Added Python 3 support while keeping Python 2.7 compatibility. Committer notes: This doesn't make it to auto detect python 3, one has to explicitely ask it to build with python 3 devel files, here are the instructions provided by Jaroslav: --- $ cp -a tools/perf tools/python3-perf $ make V=1 prefix=/usr -C tools/perf PYTHON=/usr/bin/python2 all $ make V=1 prefix=/usr -C tools/python3-perf PYTHON=/usr/bin/python3 all $ make V=1 prefix=/usr -C tools/python3-perf PYTHON=/usr/bin/python3 DESTDIR=%{buildroot} install-python_ext $ make V=1 prefix=/usr -C tools/perf PYTHON=/usr/bin/python2 DESTDIR=%{buildroot} install-python_ext --- We need to make this automatic, just like the existing tests for checking if the python2 devel files are in place, allowing the build with python3 if available, fallbacking to python2 and then just disabling it if none are available. So, using the PYTHON variable to build it using O= we get: Before this patch: $ rpm -q python3 python3-devel python3-3.6.4-7.fc27.x86_64 python3-devel-3.6.4-7.fc27.x86_64 $ rm -rf /tmp/build/perf/ ; mkdir -p /tmp/build/perf ; make O=/tmp/build/perf PYTHON=/usr/bin/python3 -C tools/perf install-bin make: Entering directory '/home/acme/git/linux/tools/perf' <SNIP> Makefile.config:670: Python 3 is not yet supported; please set Makefile.config:671: PYTHON and/or PYTHON_CONFIG appropriately. Makefile.config:672: If you also have Python 2 installed, then Makefile.config:673: try something like: Makefile.config:674: Makefile.config:675: make PYTHON=python2 Makefile.config:676: Makefile.config:677: Otherwise, disable Python support entirely: Makefile.config:678: Makefile.config:679: make NO_LIBPYTHON=1 Makefile.config:680: Makefile.config:681: *** . Stop. make[1]: *** [Makefile.perf:212: sub-make] Error 2 make: *** [Makefile:110: install-bin] Error 2 make: Leaving directory '/home/acme/git/linux/tools/perf' $ After: $ make O=/tmp/build/perf PYTHON=python3 -C tools/perf install-bin $ ldd ~/bin/perf | grep python libpython3.6m.so.1.0 => /lib64/libpython3.6m.so.1.0 (0x00007f58a31e8000) $ rpm -qf /lib64/libpython3.6m.so.1.0 python3-libs-3.6.4-7.fc27.x86_64 $ Now verify that when using the binding the right ELF file is loaded, using perf trace: $ perf trace -e open* perf test python 0.051 ( 0.016 ms): perf/3927 openat(dfd: CWD, filename: /etc/ld.so.cache, flags: CLOEXEC ) = 3 <SNIP> 18: 'import perf' in python : 8.849 ( 0.013 ms): sh/3929 openat(dfd: CWD, filename: /etc/ld.so.cache, flags: CLOEXEC ) = 3 <SNIP> 25.572 ( 0.008 ms): python3/3931 openat(dfd: CWD, filename: /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so, flags: CLOEXEC) = 3 <SNIP> Ok <SNIP> $ And using tools/perf/python/twatch.py, to show PERF_RECORD_ metaevents: $ python3 tools/perf/python/twatch.py cpu: 3, pid: 16060, tid: 16060 { type: fork, pid: 5207, ppid: 16060, tid: 5207, ptid: 16060, time: 10798513015459} cpu: 3, pid: 16060, tid: 16060 { type: fork, pid: 5208, ppid: 16060, tid: 5208, ptid: 16060, time: 10798513562503} cpu: 0, pid: 5208, tid: 5208 { type: comm, pid: 5208, tid: 5208, comm: grep } cpu: 2, pid: 5207, tid: 5207 { type: comm, pid: 5207, tid: 5207, comm: ps } cpu: 2, pid: 5207, tid: 5207 { type: exit, pid: 5207, ppid: 5207, tid: 5207, ptid: 5207, time: 10798551337484} cpu: 3, pid: 5208, tid: 5208 { type: exit, pid: 5208, ppid: 5208, tid: 5208, ptid: 5208, time: 10798551292153} cpu: 3, pid: 601, tid: 601 { type: fork, pid: 5209, ppid: 601, tid: 5209, ptid: 601, time: 10801779977324} ^CTraceback (most recent call last): File "tools/perf/python/twatch.py", line 68, in <module> main() File "tools/perf/python/twatch.py", line 40, in main evlist.poll(timeout = -1) KeyboardInterrupt $ # ps ax|grep twatch 5197 pts/8 S+ 0:00 python3 tools/perf/python/twatch.py # ls -la /proc/5197/smaps -r--r--r--. 1 acme acme 0 Feb 19 13:14 /proc/5197/smaps # grep python /proc/5197/smaps 558111307000-558111309000 r-xp 00000000 fd:00 3151710 /usr/bin/python3.6 558111508000-558111509000 r--p 00001000 fd:00 3151710 /usr/bin/python3.6 558111509000-55811150a000 rw-p 00002000 fd:00 3151710 /usr/bin/python3.6 7ffad6fc1000-7ffad7008000 r-xp 00000000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so 7ffad7008000-7ffad7207000 ---p 00047000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so 7ffad7207000-7ffad7208000 r--p 00046000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so 7ffad7208000-7ffad7215000 rw-p 00047000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so 7ffadea77000-7ffaded3d000 r-xp 00000000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0 7ffaded3d000-7ffadef3c000 ---p 002c6000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0 7ffadef3c000-7ffadef42000 r--p 002c5000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0 7ffadef42000-7ffadefa5000 rw-p 002cb000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0 # And with this patch, but building normally, without specifying the PYTHON=python3 part, which will make it use python2 if its devel files are available, like in this test: $ make O=/tmp/build/perf -C tools/perf install-bin $ ldd ~/bin/perf | grep python libpython2.7.so.1.0 => /lib64/libpython2.7.so.1.0 (0x00007f6a44410000) $ ldd /tmp/build/perf/python_ext_build/lib/perf.so | grep python libpython2.7.so.1.0 => /lib64/libpython2.7.so.1.0 (0x00007fed28a2c000) $ [acme@jouet perf]$ tools/perf/python/twatch.py cpu: 0, pid: 2817, tid: 2817 { type: fork, pid: 2817, ppid: 2817, tid: 8910, ptid: 2817, time: 11126454335306} cpu: 0, pid: 2817, tid: 2817 { type: comm, pid: 2817, tid: 8910, comm: worker } $ ps ax | grep twatch.py 8909 pts/8 S+ 0:00 /usr/bin/python tools/perf/python/twatch.py $ grep python /proc/8909/smaps 5579de658000-5579de659000 r-xp 00000000 fd:00 3156044 /usr/bin/python2.7 5579de858000-5579de859000 r--p 00000000 fd:00 3156044 /usr/bin/python2.7 5579de859000-5579de85a000 rw-p 00001000 fd:00 3156044 /usr/bin/python2.7 7f0de01f7000-7f0de023e000 r-xp 00000000 00:2d 230695 /tmp/build/perf/python/perf.so 7f0de023e000-7f0de043d000 ---p 00047000 00:2d 230695 /tmp/build/perf/python/perf.so 7f0de043d000-7f0de043e000 r--p 00046000 00:2d 230695 /tmp/build/perf/python/perf.so 7f0de043e000-7f0de044b000 rw-p 00047000 00:2d 230695 /tmp/build/perf/python/perf.so 7f0de6f0f000-7f0de6f13000 r-xp 00000000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so 7f0de6f13000-7f0de7113000 ---p 00004000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so 7f0de7113000-7f0de7114000 r--p 00004000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so 7f0de7114000-7f0de7115000 rw-p 00005000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so 7f0de7e73000-7f0de8052000 r-xp 00000000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0 7f0de8052000-7f0de8251000 ---p 001df000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0 7f0de8251000-7f0de8255000 r--p 001de000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0 7f0de8255000-7f0de8291000 rw-p 001e2000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0 $ Signed-off-by: Jaroslav Škarvada <jskarvad@redhat.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> LPU-Reference: 20180119205641.24242-1-jskarvad@redhat.com Link: https://lkml.kernel.org/n/tip-8d7dt9kqp83vsz25hagug8fu@git.kernel.org [ Removed explicit check for python version, allowing it to really build with python3 ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-01-19 21:56:41 +01:00
ret = _PyUnicode_FromString(s);
free(s);
}
return ret;
}
perf build: Use libtraceevent from the system Remove the LIBTRACEEVENT_DYNAMIC and LIBTRACEFS_DYNAMIC make command line variables. If libtraceevent isn't installed or NO_LIBTRACEEVENT=1 is passed to the build, don't compile in libtraceevent and libtracefs support. This also disables CONFIG_TRACE that controls "perf trace". CONFIG_LIBTRACEEVENT is used to control enablement in Build/Makefiles, HAVE_LIBTRACEEVENT is used in C code. Without HAVE_LIBTRACEEVENT tracepoints are disabled and as such the commands kmem, kwork, lock, sched and timechart are removed. The majority of commands continue to work including "perf test". Committer notes: Fixed up a tools/perf/util/Build reject and added: #include <traceevent/event-parse.h> to tools/perf/util/scripting-engines/trace-event-perl.c. Committer testing: $ rpm -qi libtraceevent-devel Name : libtraceevent-devel Version : 1.5.3 Release : 2.fc36 Architecture: x86_64 Install Date: Mon 25 Jul 2022 03:20:19 PM -03 Group : Unspecified Size : 27728 License : LGPLv2+ and GPLv2+ Signature : RSA/SHA256, Fri 15 Apr 2022 02:11:58 PM -03, Key ID 999f7cbf38ab71f4 Source RPM : libtraceevent-1.5.3-2.fc36.src.rpm Build Date : Fri 15 Apr 2022 10:57:01 AM -03 Build Host : buildvm-x86-05.iad2.fedoraproject.org Packager : Fedora Project Vendor : Fedora Project URL : https://git.kernel.org/pub/scm/libs/libtrace/libtraceevent.git/ Bug URL : https://bugz.fedoraproject.org/libtraceevent Summary : Development headers of libtraceevent Description : Development headers of libtraceevent-libs $ Default build: $ ldd ~/bin/perf | grep tracee libtraceevent.so.1 => /lib64/libtraceevent.so.1 (0x00007f1dcaf8f000) $ # perf trace -e sched:* --max-events 10 0.000 migration/0/17 sched:sched_migrate_task(comm: "", pid: 1603763 (perf), prio: 120, dest_cpu: 1) 0.005 migration/0/17 sched:sched_wake_idle_without_ipi(cpu: 1) 0.011 migration/0/17 sched:sched_switch(prev_comm: "", prev_pid: 17 (migration/0), prev_state: 1, next_comm: "", next_prio: 120) 1.173 :0/0 sched:sched_wakeup(comm: "", pid: 3138 (gnome-terminal-), prio: 120) 1.180 :0/0 sched:sched_switch(prev_comm: "", prev_prio: 120, next_comm: "", next_pid: 3138 (gnome-terminal-), next_prio: 120) 0.156 migration/1/21 sched:sched_migrate_task(comm: "", pid: 1603763 (perf), prio: 120, orig_cpu: 1, dest_cpu: 2) 0.160 migration/1/21 sched:sched_wake_idle_without_ipi(cpu: 2) 0.166 migration/1/21 sched:sched_switch(prev_comm: "", prev_pid: 21 (migration/1), prev_state: 1, next_comm: "", next_prio: 120) 1.183 :0/0 sched:sched_wakeup(comm: "", pid: 1602985 (kworker/u16:0-f), prio: 120, target_cpu: 1) 1.186 :0/0 sched:sched_switch(prev_comm: "", prev_prio: 120, next_comm: "", next_pid: 1602985 (kworker/u16:0-f), next_prio: 120) # Had to tweak tools/perf/util/setup.py to make sure the python binding shared object links with libtraceevent if -DHAVE_LIBTRACEEVENT is present in CFLAGS. Building with NO_LIBTRACEEVENT=1 uncovered some more build failures: - Make building of data-convert-bt.c to CONFIG_LIBTRACEEVENT=y - perf-$(CONFIG_LIBTRACEEVENT) += scripts/ - bpf_kwork.o needs also to be dependent on CONFIG_LIBTRACEEVENT=y - The python binding needed some fixups and util/trace-event.c can't be built and linked with the python binding shared object, so remove it in tools/perf/util/setup.py and exclude it from the list of dependencies in the python/perf.so Makefile.perf target. Building without libtraceevent-devel installed uncovered more build failures: - The python binding tools/perf/util/python.c was assuming that traceevent/parse-events.h was always available, which was the case when we defaulted to using the in-kernel tools/lib/traceevent/ files, now we need to enclose it under ifdef HAVE_LIBTRACEEVENT, just like the other parts of it that deal with tracepoints. - We have to ifdef the rules in the Build files with CONFIG_LIBTRACEEVENT=y to build builtin-trace.c and tools/perf/trace/beauty/ as we only ifdef setting CONFIG_TRACE=y when setting NO_LIBTRACEEVENT=1 in the make command line, not when we don't detect libtraceevent-devel installed in the system. Simplification here to avoid these two ways of disabling builtin-trace.c and not having CONFIG_TRACE=y when libtraceevent-devel isn't installed is the clean way. From Athira: <quote> tools/perf/arch/powerpc/util/Build -perf-y += kvm-stat.o +perf-$(CONFIG_LIBTRACEEVENT) += kvm-stat.o </quote> Then, ditto for arm64 and s390, detected by container cross build tests. - s/390 uses test__checkevent_tracepoint() that is now only available if HAVE_LIBTRACEEVENT is defined, enclose the callsite with ifder HAVE_LIBTRACEEVENT. Also from Athira: <quote> With this change, I could successfully compile in these environment: - Without libtraceevent-devel installed - With libtraceevent-devel installed - With “make NO_LIBTRACEEVENT=1” </quote> Then, finally rename CONFIG_TRACEEVENT to CONFIG_LIBTRACEEVENT for consistency with other libraries detected in tools/perf/. Signed-off-by: Ian Rogers <irogers@google.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Tested-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: bpf@vger.kernel.org Link: http://lore.kernel.org/lkml/20221205225940.3079667-3-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-12-05 14:59:39 -08:00
#ifdef HAVE_LIBTRACEEVENT
static bool is_tracepoint(struct pyrf_event *pevent)
{
libperf: Move perf_event_attr field from perf's evsel to libperf's perf_evsel Move the perf_event_attr struct fron 'struct evsel' to 'struct perf_evsel'. Committer notes: Fixed up these: tools/perf/arch/arm/util/auxtrace.c tools/perf/arch/arm/util/cs-etm.c tools/perf/arch/arm64/util/arm-spe.c tools/perf/arch/s390/util/auxtrace.c tools/perf/util/cs-etm.c Also cc1: warnings being treated as errors tests/sample-parsing.c: In function 'do_test': tests/sample-parsing.c:162: error: missing initializer tests/sample-parsing.c:162: error: (near initialization for 'evsel.core.cpus') struct evsel evsel = { .needs_swap = false, - .core.attr = { - .sample_type = sample_type, - .read_format = read_format, + .core = { + . attr = { + .sample_type = sample_type, + .read_format = read_format, + }, [perfbuilder@a70e4eeb5549 /]$ gcc --version |& head -1 gcc (GCC) 4.4.7 Also we don't need to include perf_event.h in tools/perf/lib/include/perf/evsel.h, forward declaring 'struct perf_event_attr' is enough. And this even fixes the build in some systems where things are used somewhere down the include path from perf_event.h without defining __always_inline. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20190721112506.12306-43-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-07-21 13:24:29 +02:00
return pevent->evsel->core.attr.type == PERF_TYPE_TRACEPOINT;
}
static PyObject*
tracepoint_field(struct pyrf_event *pe, struct tep_format_field *field)
{
struct tep_handle *pevent = field->event->tep;
void *data = pe->sample.raw_data;
PyObject *ret = NULL;
unsigned long long val;
unsigned int offset, len;
if (field->flags & TEP_FIELD_IS_ARRAY) {
offset = field->offset;
len = field->size;
if (field->flags & TEP_FIELD_IS_DYNAMIC) {
val = tep_read_number(pevent, data + offset, len);
offset = val;
len = offset >> 16;
offset &= 0xffff;
if (tep_field_is_relative(field->flags))
offset += field->offset + field->size;
}
if (field->flags & TEP_FIELD_IS_STRING &&
is_printable_array(data + offset, len)) {
perf tools: Add Python 3 support Added Python 3 support while keeping Python 2.7 compatibility. Committer notes: This doesn't make it to auto detect python 3, one has to explicitely ask it to build with python 3 devel files, here are the instructions provided by Jaroslav: --- $ cp -a tools/perf tools/python3-perf $ make V=1 prefix=/usr -C tools/perf PYTHON=/usr/bin/python2 all $ make V=1 prefix=/usr -C tools/python3-perf PYTHON=/usr/bin/python3 all $ make V=1 prefix=/usr -C tools/python3-perf PYTHON=/usr/bin/python3 DESTDIR=%{buildroot} install-python_ext $ make V=1 prefix=/usr -C tools/perf PYTHON=/usr/bin/python2 DESTDIR=%{buildroot} install-python_ext --- We need to make this automatic, just like the existing tests for checking if the python2 devel files are in place, allowing the build with python3 if available, fallbacking to python2 and then just disabling it if none are available. So, using the PYTHON variable to build it using O= we get: Before this patch: $ rpm -q python3 python3-devel python3-3.6.4-7.fc27.x86_64 python3-devel-3.6.4-7.fc27.x86_64 $ rm -rf /tmp/build/perf/ ; mkdir -p /tmp/build/perf ; make O=/tmp/build/perf PYTHON=/usr/bin/python3 -C tools/perf install-bin make: Entering directory '/home/acme/git/linux/tools/perf' <SNIP> Makefile.config:670: Python 3 is not yet supported; please set Makefile.config:671: PYTHON and/or PYTHON_CONFIG appropriately. Makefile.config:672: If you also have Python 2 installed, then Makefile.config:673: try something like: Makefile.config:674: Makefile.config:675: make PYTHON=python2 Makefile.config:676: Makefile.config:677: Otherwise, disable Python support entirely: Makefile.config:678: Makefile.config:679: make NO_LIBPYTHON=1 Makefile.config:680: Makefile.config:681: *** . Stop. make[1]: *** [Makefile.perf:212: sub-make] Error 2 make: *** [Makefile:110: install-bin] Error 2 make: Leaving directory '/home/acme/git/linux/tools/perf' $ After: $ make O=/tmp/build/perf PYTHON=python3 -C tools/perf install-bin $ ldd ~/bin/perf | grep python libpython3.6m.so.1.0 => /lib64/libpython3.6m.so.1.0 (0x00007f58a31e8000) $ rpm -qf /lib64/libpython3.6m.so.1.0 python3-libs-3.6.4-7.fc27.x86_64 $ Now verify that when using the binding the right ELF file is loaded, using perf trace: $ perf trace -e open* perf test python 0.051 ( 0.016 ms): perf/3927 openat(dfd: CWD, filename: /etc/ld.so.cache, flags: CLOEXEC ) = 3 <SNIP> 18: 'import perf' in python : 8.849 ( 0.013 ms): sh/3929 openat(dfd: CWD, filename: /etc/ld.so.cache, flags: CLOEXEC ) = 3 <SNIP> 25.572 ( 0.008 ms): python3/3931 openat(dfd: CWD, filename: /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so, flags: CLOEXEC) = 3 <SNIP> Ok <SNIP> $ And using tools/perf/python/twatch.py, to show PERF_RECORD_ metaevents: $ python3 tools/perf/python/twatch.py cpu: 3, pid: 16060, tid: 16060 { type: fork, pid: 5207, ppid: 16060, tid: 5207, ptid: 16060, time: 10798513015459} cpu: 3, pid: 16060, tid: 16060 { type: fork, pid: 5208, ppid: 16060, tid: 5208, ptid: 16060, time: 10798513562503} cpu: 0, pid: 5208, tid: 5208 { type: comm, pid: 5208, tid: 5208, comm: grep } cpu: 2, pid: 5207, tid: 5207 { type: comm, pid: 5207, tid: 5207, comm: ps } cpu: 2, pid: 5207, tid: 5207 { type: exit, pid: 5207, ppid: 5207, tid: 5207, ptid: 5207, time: 10798551337484} cpu: 3, pid: 5208, tid: 5208 { type: exit, pid: 5208, ppid: 5208, tid: 5208, ptid: 5208, time: 10798551292153} cpu: 3, pid: 601, tid: 601 { type: fork, pid: 5209, ppid: 601, tid: 5209, ptid: 601, time: 10801779977324} ^CTraceback (most recent call last): File "tools/perf/python/twatch.py", line 68, in <module> main() File "tools/perf/python/twatch.py", line 40, in main evlist.poll(timeout = -1) KeyboardInterrupt $ # ps ax|grep twatch 5197 pts/8 S+ 0:00 python3 tools/perf/python/twatch.py # ls -la /proc/5197/smaps -r--r--r--. 1 acme acme 0 Feb 19 13:14 /proc/5197/smaps # grep python /proc/5197/smaps 558111307000-558111309000 r-xp 00000000 fd:00 3151710 /usr/bin/python3.6 558111508000-558111509000 r--p 00001000 fd:00 3151710 /usr/bin/python3.6 558111509000-55811150a000 rw-p 00002000 fd:00 3151710 /usr/bin/python3.6 7ffad6fc1000-7ffad7008000 r-xp 00000000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so 7ffad7008000-7ffad7207000 ---p 00047000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so 7ffad7207000-7ffad7208000 r--p 00046000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so 7ffad7208000-7ffad7215000 rw-p 00047000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so 7ffadea77000-7ffaded3d000 r-xp 00000000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0 7ffaded3d000-7ffadef3c000 ---p 002c6000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0 7ffadef3c000-7ffadef42000 r--p 002c5000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0 7ffadef42000-7ffadefa5000 rw-p 002cb000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0 # And with this patch, but building normally, without specifying the PYTHON=python3 part, which will make it use python2 if its devel files are available, like in this test: $ make O=/tmp/build/perf -C tools/perf install-bin $ ldd ~/bin/perf | grep python libpython2.7.so.1.0 => /lib64/libpython2.7.so.1.0 (0x00007f6a44410000) $ ldd /tmp/build/perf/python_ext_build/lib/perf.so | grep python libpython2.7.so.1.0 => /lib64/libpython2.7.so.1.0 (0x00007fed28a2c000) $ [acme@jouet perf]$ tools/perf/python/twatch.py cpu: 0, pid: 2817, tid: 2817 { type: fork, pid: 2817, ppid: 2817, tid: 8910, ptid: 2817, time: 11126454335306} cpu: 0, pid: 2817, tid: 2817 { type: comm, pid: 2817, tid: 8910, comm: worker } $ ps ax | grep twatch.py 8909 pts/8 S+ 0:00 /usr/bin/python tools/perf/python/twatch.py $ grep python /proc/8909/smaps 5579de658000-5579de659000 r-xp 00000000 fd:00 3156044 /usr/bin/python2.7 5579de858000-5579de859000 r--p 00000000 fd:00 3156044 /usr/bin/python2.7 5579de859000-5579de85a000 rw-p 00001000 fd:00 3156044 /usr/bin/python2.7 7f0de01f7000-7f0de023e000 r-xp 00000000 00:2d 230695 /tmp/build/perf/python/perf.so 7f0de023e000-7f0de043d000 ---p 00047000 00:2d 230695 /tmp/build/perf/python/perf.so 7f0de043d000-7f0de043e000 r--p 00046000 00:2d 230695 /tmp/build/perf/python/perf.so 7f0de043e000-7f0de044b000 rw-p 00047000 00:2d 230695 /tmp/build/perf/python/perf.so 7f0de6f0f000-7f0de6f13000 r-xp 00000000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so 7f0de6f13000-7f0de7113000 ---p 00004000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so 7f0de7113000-7f0de7114000 r--p 00004000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so 7f0de7114000-7f0de7115000 rw-p 00005000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so 7f0de7e73000-7f0de8052000 r-xp 00000000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0 7f0de8052000-7f0de8251000 ---p 001df000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0 7f0de8251000-7f0de8255000 r--p 001de000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0 7f0de8255000-7f0de8291000 rw-p 001e2000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0 $ Signed-off-by: Jaroslav Škarvada <jskarvad@redhat.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> LPU-Reference: 20180119205641.24242-1-jskarvad@redhat.com Link: https://lkml.kernel.org/n/tip-8d7dt9kqp83vsz25hagug8fu@git.kernel.org [ Removed explicit check for python version, allowing it to really build with python3 ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-01-19 21:56:41 +01:00
ret = _PyUnicode_FromString((char *)data + offset);
} else {
ret = PyByteArray_FromStringAndSize((const char *) data + offset, len);
field->flags &= ~TEP_FIELD_IS_STRING;
}
} else {
val = tep_read_number(pevent, data + field->offset,
field->size);
if (field->flags & TEP_FIELD_IS_POINTER)
ret = PyLong_FromUnsignedLong((unsigned long) val);
else if (field->flags & TEP_FIELD_IS_SIGNED)
ret = PyLong_FromLong((long) val);
else
ret = PyLong_FromUnsignedLong((unsigned long) val);
}
return ret;
}
static PyObject*
get_tracepoint_field(struct pyrf_event *pevent, PyObject *attr_name)
{
perf tools: Add Python 3 support Added Python 3 support while keeping Python 2.7 compatibility. Committer notes: This doesn't make it to auto detect python 3, one has to explicitely ask it to build with python 3 devel files, here are the instructions provided by Jaroslav: --- $ cp -a tools/perf tools/python3-perf $ make V=1 prefix=/usr -C tools/perf PYTHON=/usr/bin/python2 all $ make V=1 prefix=/usr -C tools/python3-perf PYTHON=/usr/bin/python3 all $ make V=1 prefix=/usr -C tools/python3-perf PYTHON=/usr/bin/python3 DESTDIR=%{buildroot} install-python_ext $ make V=1 prefix=/usr -C tools/perf PYTHON=/usr/bin/python2 DESTDIR=%{buildroot} install-python_ext --- We need to make this automatic, just like the existing tests for checking if the python2 devel files are in place, allowing the build with python3 if available, fallbacking to python2 and then just disabling it if none are available. So, using the PYTHON variable to build it using O= we get: Before this patch: $ rpm -q python3 python3-devel python3-3.6.4-7.fc27.x86_64 python3-devel-3.6.4-7.fc27.x86_64 $ rm -rf /tmp/build/perf/ ; mkdir -p /tmp/build/perf ; make O=/tmp/build/perf PYTHON=/usr/bin/python3 -C tools/perf install-bin make: Entering directory '/home/acme/git/linux/tools/perf' <SNIP> Makefile.config:670: Python 3 is not yet supported; please set Makefile.config:671: PYTHON and/or PYTHON_CONFIG appropriately. Makefile.config:672: If you also have Python 2 installed, then Makefile.config:673: try something like: Makefile.config:674: Makefile.config:675: make PYTHON=python2 Makefile.config:676: Makefile.config:677: Otherwise, disable Python support entirely: Makefile.config:678: Makefile.config:679: make NO_LIBPYTHON=1 Makefile.config:680: Makefile.config:681: *** . Stop. make[1]: *** [Makefile.perf:212: sub-make] Error 2 make: *** [Makefile:110: install-bin] Error 2 make: Leaving directory '/home/acme/git/linux/tools/perf' $ After: $ make O=/tmp/build/perf PYTHON=python3 -C tools/perf install-bin $ ldd ~/bin/perf | grep python libpython3.6m.so.1.0 => /lib64/libpython3.6m.so.1.0 (0x00007f58a31e8000) $ rpm -qf /lib64/libpython3.6m.so.1.0 python3-libs-3.6.4-7.fc27.x86_64 $ Now verify that when using the binding the right ELF file is loaded, using perf trace: $ perf trace -e open* perf test python 0.051 ( 0.016 ms): perf/3927 openat(dfd: CWD, filename: /etc/ld.so.cache, flags: CLOEXEC ) = 3 <SNIP> 18: 'import perf' in python : 8.849 ( 0.013 ms): sh/3929 openat(dfd: CWD, filename: /etc/ld.so.cache, flags: CLOEXEC ) = 3 <SNIP> 25.572 ( 0.008 ms): python3/3931 openat(dfd: CWD, filename: /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so, flags: CLOEXEC) = 3 <SNIP> Ok <SNIP> $ And using tools/perf/python/twatch.py, to show PERF_RECORD_ metaevents: $ python3 tools/perf/python/twatch.py cpu: 3, pid: 16060, tid: 16060 { type: fork, pid: 5207, ppid: 16060, tid: 5207, ptid: 16060, time: 10798513015459} cpu: 3, pid: 16060, tid: 16060 { type: fork, pid: 5208, ppid: 16060, tid: 5208, ptid: 16060, time: 10798513562503} cpu: 0, pid: 5208, tid: 5208 { type: comm, pid: 5208, tid: 5208, comm: grep } cpu: 2, pid: 5207, tid: 5207 { type: comm, pid: 5207, tid: 5207, comm: ps } cpu: 2, pid: 5207, tid: 5207 { type: exit, pid: 5207, ppid: 5207, tid: 5207, ptid: 5207, time: 10798551337484} cpu: 3, pid: 5208, tid: 5208 { type: exit, pid: 5208, ppid: 5208, tid: 5208, ptid: 5208, time: 10798551292153} cpu: 3, pid: 601, tid: 601 { type: fork, pid: 5209, ppid: 601, tid: 5209, ptid: 601, time: 10801779977324} ^CTraceback (most recent call last): File "tools/perf/python/twatch.py", line 68, in <module> main() File "tools/perf/python/twatch.py", line 40, in main evlist.poll(timeout = -1) KeyboardInterrupt $ # ps ax|grep twatch 5197 pts/8 S+ 0:00 python3 tools/perf/python/twatch.py # ls -la /proc/5197/smaps -r--r--r--. 1 acme acme 0 Feb 19 13:14 /proc/5197/smaps # grep python /proc/5197/smaps 558111307000-558111309000 r-xp 00000000 fd:00 3151710 /usr/bin/python3.6 558111508000-558111509000 r--p 00001000 fd:00 3151710 /usr/bin/python3.6 558111509000-55811150a000 rw-p 00002000 fd:00 3151710 /usr/bin/python3.6 7ffad6fc1000-7ffad7008000 r-xp 00000000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so 7ffad7008000-7ffad7207000 ---p 00047000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so 7ffad7207000-7ffad7208000 r--p 00046000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so 7ffad7208000-7ffad7215000 rw-p 00047000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so 7ffadea77000-7ffaded3d000 r-xp 00000000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0 7ffaded3d000-7ffadef3c000 ---p 002c6000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0 7ffadef3c000-7ffadef42000 r--p 002c5000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0 7ffadef42000-7ffadefa5000 rw-p 002cb000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0 # And with this patch, but building normally, without specifying the PYTHON=python3 part, which will make it use python2 if its devel files are available, like in this test: $ make O=/tmp/build/perf -C tools/perf install-bin $ ldd ~/bin/perf | grep python libpython2.7.so.1.0 => /lib64/libpython2.7.so.1.0 (0x00007f6a44410000) $ ldd /tmp/build/perf/python_ext_build/lib/perf.so | grep python libpython2.7.so.1.0 => /lib64/libpython2.7.so.1.0 (0x00007fed28a2c000) $ [acme@jouet perf]$ tools/perf/python/twatch.py cpu: 0, pid: 2817, tid: 2817 { type: fork, pid: 2817, ppid: 2817, tid: 8910, ptid: 2817, time: 11126454335306} cpu: 0, pid: 2817, tid: 2817 { type: comm, pid: 2817, tid: 8910, comm: worker } $ ps ax | grep twatch.py 8909 pts/8 S+ 0:00 /usr/bin/python tools/perf/python/twatch.py $ grep python /proc/8909/smaps 5579de658000-5579de659000 r-xp 00000000 fd:00 3156044 /usr/bin/python2.7 5579de858000-5579de859000 r--p 00000000 fd:00 3156044 /usr/bin/python2.7 5579de859000-5579de85a000 rw-p 00001000 fd:00 3156044 /usr/bin/python2.7 7f0de01f7000-7f0de023e000 r-xp 00000000 00:2d 230695 /tmp/build/perf/python/perf.so 7f0de023e000-7f0de043d000 ---p 00047000 00:2d 230695 /tmp/build/perf/python/perf.so 7f0de043d000-7f0de043e000 r--p 00046000 00:2d 230695 /tmp/build/perf/python/perf.so 7f0de043e000-7f0de044b000 rw-p 00047000 00:2d 230695 /tmp/build/perf/python/perf.so 7f0de6f0f000-7f0de6f13000 r-xp 00000000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so 7f0de6f13000-7f0de7113000 ---p 00004000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so 7f0de7113000-7f0de7114000 r--p 00004000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so 7f0de7114000-7f0de7115000 rw-p 00005000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so 7f0de7e73000-7f0de8052000 r-xp 00000000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0 7f0de8052000-7f0de8251000 ---p 001df000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0 7f0de8251000-7f0de8255000 r--p 001de000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0 7f0de8255000-7f0de8291000 rw-p 001e2000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0 $ Signed-off-by: Jaroslav Škarvada <jskarvad@redhat.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> LPU-Reference: 20180119205641.24242-1-jskarvad@redhat.com Link: https://lkml.kernel.org/n/tip-8d7dt9kqp83vsz25hagug8fu@git.kernel.org [ Removed explicit check for python version, allowing it to really build with python3 ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-01-19 21:56:41 +01:00
const char *str = _PyUnicode_AsString(PyObject_Str(attr_name));
struct evsel *evsel = pevent->evsel;
struct tep_format_field *field;
if (!evsel->tp_format) {
struct tep_event *tp_format;
libperf: Move perf_event_attr field from perf's evsel to libperf's perf_evsel Move the perf_event_attr struct fron 'struct evsel' to 'struct perf_evsel'. Committer notes: Fixed up these: tools/perf/arch/arm/util/auxtrace.c tools/perf/arch/arm/util/cs-etm.c tools/perf/arch/arm64/util/arm-spe.c tools/perf/arch/s390/util/auxtrace.c tools/perf/util/cs-etm.c Also cc1: warnings being treated as errors tests/sample-parsing.c: In function 'do_test': tests/sample-parsing.c:162: error: missing initializer tests/sample-parsing.c:162: error: (near initialization for 'evsel.core.cpus') struct evsel evsel = { .needs_swap = false, - .core.attr = { - .sample_type = sample_type, - .read_format = read_format, + .core = { + . attr = { + .sample_type = sample_type, + .read_format = read_format, + }, [perfbuilder@a70e4eeb5549 /]$ gcc --version |& head -1 gcc (GCC) 4.4.7 Also we don't need to include perf_event.h in tools/perf/lib/include/perf/evsel.h, forward declaring 'struct perf_event_attr' is enough. And this even fixes the build in some systems where things are used somewhere down the include path from perf_event.h without defining __always_inline. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20190721112506.12306-43-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-07-21 13:24:29 +02:00
tp_format = trace_event__tp_format_id(evsel->core.attr.config);
if (IS_ERR_OR_NULL(tp_format))
return NULL;
evsel->tp_format = tp_format;
}
field = tep_find_any_field(evsel->tp_format, str);
if (!field)
return NULL;
return tracepoint_field(pevent, field);
}
perf build: Use libtraceevent from the system Remove the LIBTRACEEVENT_DYNAMIC and LIBTRACEFS_DYNAMIC make command line variables. If libtraceevent isn't installed or NO_LIBTRACEEVENT=1 is passed to the build, don't compile in libtraceevent and libtracefs support. This also disables CONFIG_TRACE that controls "perf trace". CONFIG_LIBTRACEEVENT is used to control enablement in Build/Makefiles, HAVE_LIBTRACEEVENT is used in C code. Without HAVE_LIBTRACEEVENT tracepoints are disabled and as such the commands kmem, kwork, lock, sched and timechart are removed. The majority of commands continue to work including "perf test". Committer notes: Fixed up a tools/perf/util/Build reject and added: #include <traceevent/event-parse.h> to tools/perf/util/scripting-engines/trace-event-perl.c. Committer testing: $ rpm -qi libtraceevent-devel Name : libtraceevent-devel Version : 1.5.3 Release : 2.fc36 Architecture: x86_64 Install Date: Mon 25 Jul 2022 03:20:19 PM -03 Group : Unspecified Size : 27728 License : LGPLv2+ and GPLv2+ Signature : RSA/SHA256, Fri 15 Apr 2022 02:11:58 PM -03, Key ID 999f7cbf38ab71f4 Source RPM : libtraceevent-1.5.3-2.fc36.src.rpm Build Date : Fri 15 Apr 2022 10:57:01 AM -03 Build Host : buildvm-x86-05.iad2.fedoraproject.org Packager : Fedora Project Vendor : Fedora Project URL : https://git.kernel.org/pub/scm/libs/libtrace/libtraceevent.git/ Bug URL : https://bugz.fedoraproject.org/libtraceevent Summary : Development headers of libtraceevent Description : Development headers of libtraceevent-libs $ Default build: $ ldd ~/bin/perf | grep tracee libtraceevent.so.1 => /lib64/libtraceevent.so.1 (0x00007f1dcaf8f000) $ # perf trace -e sched:* --max-events 10 0.000 migration/0/17 sched:sched_migrate_task(comm: "", pid: 1603763 (perf), prio: 120, dest_cpu: 1) 0.005 migration/0/17 sched:sched_wake_idle_without_ipi(cpu: 1) 0.011 migration/0/17 sched:sched_switch(prev_comm: "", prev_pid: 17 (migration/0), prev_state: 1, next_comm: "", next_prio: 120) 1.173 :0/0 sched:sched_wakeup(comm: "", pid: 3138 (gnome-terminal-), prio: 120) 1.180 :0/0 sched:sched_switch(prev_comm: "", prev_prio: 120, next_comm: "", next_pid: 3138 (gnome-terminal-), next_prio: 120) 0.156 migration/1/21 sched:sched_migrate_task(comm: "", pid: 1603763 (perf), prio: 120, orig_cpu: 1, dest_cpu: 2) 0.160 migration/1/21 sched:sched_wake_idle_without_ipi(cpu: 2) 0.166 migration/1/21 sched:sched_switch(prev_comm: "", prev_pid: 21 (migration/1), prev_state: 1, next_comm: "", next_prio: 120) 1.183 :0/0 sched:sched_wakeup(comm: "", pid: 1602985 (kworker/u16:0-f), prio: 120, target_cpu: 1) 1.186 :0/0 sched:sched_switch(prev_comm: "", prev_prio: 120, next_comm: "", next_pid: 1602985 (kworker/u16:0-f), next_prio: 120) # Had to tweak tools/perf/util/setup.py to make sure the python binding shared object links with libtraceevent if -DHAVE_LIBTRACEEVENT is present in CFLAGS. Building with NO_LIBTRACEEVENT=1 uncovered some more build failures: - Make building of data-convert-bt.c to CONFIG_LIBTRACEEVENT=y - perf-$(CONFIG_LIBTRACEEVENT) += scripts/ - bpf_kwork.o needs also to be dependent on CONFIG_LIBTRACEEVENT=y - The python binding needed some fixups and util/trace-event.c can't be built and linked with the python binding shared object, so remove it in tools/perf/util/setup.py and exclude it from the list of dependencies in the python/perf.so Makefile.perf target. Building without libtraceevent-devel installed uncovered more build failures: - The python binding tools/perf/util/python.c was assuming that traceevent/parse-events.h was always available, which was the case when we defaulted to using the in-kernel tools/lib/traceevent/ files, now we need to enclose it under ifdef HAVE_LIBTRACEEVENT, just like the other parts of it that deal with tracepoints. - We have to ifdef the rules in the Build files with CONFIG_LIBTRACEEVENT=y to build builtin-trace.c and tools/perf/trace/beauty/ as we only ifdef setting CONFIG_TRACE=y when setting NO_LIBTRACEEVENT=1 in the make command line, not when we don't detect libtraceevent-devel installed in the system. Simplification here to avoid these two ways of disabling builtin-trace.c and not having CONFIG_TRACE=y when libtraceevent-devel isn't installed is the clean way. From Athira: <quote> tools/perf/arch/powerpc/util/Build -perf-y += kvm-stat.o +perf-$(CONFIG_LIBTRACEEVENT) += kvm-stat.o </quote> Then, ditto for arm64 and s390, detected by container cross build tests. - s/390 uses test__checkevent_tracepoint() that is now only available if HAVE_LIBTRACEEVENT is defined, enclose the callsite with ifder HAVE_LIBTRACEEVENT. Also from Athira: <quote> With this change, I could successfully compile in these environment: - Without libtraceevent-devel installed - With libtraceevent-devel installed - With “make NO_LIBTRACEEVENT=1” </quote> Then, finally rename CONFIG_TRACEEVENT to CONFIG_LIBTRACEEVENT for consistency with other libraries detected in tools/perf/. Signed-off-by: Ian Rogers <irogers@google.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Tested-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: bpf@vger.kernel.org Link: http://lore.kernel.org/lkml/20221205225940.3079667-3-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-12-05 14:59:39 -08:00
#endif /* HAVE_LIBTRACEEVENT */
static PyObject*
pyrf_sample_event__getattro(struct pyrf_event *pevent, PyObject *attr_name)
{
PyObject *obj = NULL;
perf build: Use libtraceevent from the system Remove the LIBTRACEEVENT_DYNAMIC and LIBTRACEFS_DYNAMIC make command line variables. If libtraceevent isn't installed or NO_LIBTRACEEVENT=1 is passed to the build, don't compile in libtraceevent and libtracefs support. This also disables CONFIG_TRACE that controls "perf trace". CONFIG_LIBTRACEEVENT is used to control enablement in Build/Makefiles, HAVE_LIBTRACEEVENT is used in C code. Without HAVE_LIBTRACEEVENT tracepoints are disabled and as such the commands kmem, kwork, lock, sched and timechart are removed. The majority of commands continue to work including "perf test". Committer notes: Fixed up a tools/perf/util/Build reject and added: #include <traceevent/event-parse.h> to tools/perf/util/scripting-engines/trace-event-perl.c. Committer testing: $ rpm -qi libtraceevent-devel Name : libtraceevent-devel Version : 1.5.3 Release : 2.fc36 Architecture: x86_64 Install Date: Mon 25 Jul 2022 03:20:19 PM -03 Group : Unspecified Size : 27728 License : LGPLv2+ and GPLv2+ Signature : RSA/SHA256, Fri 15 Apr 2022 02:11:58 PM -03, Key ID 999f7cbf38ab71f4 Source RPM : libtraceevent-1.5.3-2.fc36.src.rpm Build Date : Fri 15 Apr 2022 10:57:01 AM -03 Build Host : buildvm-x86-05.iad2.fedoraproject.org Packager : Fedora Project Vendor : Fedora Project URL : https://git.kernel.org/pub/scm/libs/libtrace/libtraceevent.git/ Bug URL : https://bugz.fedoraproject.org/libtraceevent Summary : Development headers of libtraceevent Description : Development headers of libtraceevent-libs $ Default build: $ ldd ~/bin/perf | grep tracee libtraceevent.so.1 => /lib64/libtraceevent.so.1 (0x00007f1dcaf8f000) $ # perf trace -e sched:* --max-events 10 0.000 migration/0/17 sched:sched_migrate_task(comm: "", pid: 1603763 (perf), prio: 120, dest_cpu: 1) 0.005 migration/0/17 sched:sched_wake_idle_without_ipi(cpu: 1) 0.011 migration/0/17 sched:sched_switch(prev_comm: "", prev_pid: 17 (migration/0), prev_state: 1, next_comm: "", next_prio: 120) 1.173 :0/0 sched:sched_wakeup(comm: "", pid: 3138 (gnome-terminal-), prio: 120) 1.180 :0/0 sched:sched_switch(prev_comm: "", prev_prio: 120, next_comm: "", next_pid: 3138 (gnome-terminal-), next_prio: 120) 0.156 migration/1/21 sched:sched_migrate_task(comm: "", pid: 1603763 (perf), prio: 120, orig_cpu: 1, dest_cpu: 2) 0.160 migration/1/21 sched:sched_wake_idle_without_ipi(cpu: 2) 0.166 migration/1/21 sched:sched_switch(prev_comm: "", prev_pid: 21 (migration/1), prev_state: 1, next_comm: "", next_prio: 120) 1.183 :0/0 sched:sched_wakeup(comm: "", pid: 1602985 (kworker/u16:0-f), prio: 120, target_cpu: 1) 1.186 :0/0 sched:sched_switch(prev_comm: "", prev_prio: 120, next_comm: "", next_pid: 1602985 (kworker/u16:0-f), next_prio: 120) # Had to tweak tools/perf/util/setup.py to make sure the python binding shared object links with libtraceevent if -DHAVE_LIBTRACEEVENT is present in CFLAGS. Building with NO_LIBTRACEEVENT=1 uncovered some more build failures: - Make building of data-convert-bt.c to CONFIG_LIBTRACEEVENT=y - perf-$(CONFIG_LIBTRACEEVENT) += scripts/ - bpf_kwork.o needs also to be dependent on CONFIG_LIBTRACEEVENT=y - The python binding needed some fixups and util/trace-event.c can't be built and linked with the python binding shared object, so remove it in tools/perf/util/setup.py and exclude it from the list of dependencies in the python/perf.so Makefile.perf target. Building without libtraceevent-devel installed uncovered more build failures: - The python binding tools/perf/util/python.c was assuming that traceevent/parse-events.h was always available, which was the case when we defaulted to using the in-kernel tools/lib/traceevent/ files, now we need to enclose it under ifdef HAVE_LIBTRACEEVENT, just like the other parts of it that deal with tracepoints. - We have to ifdef the rules in the Build files with CONFIG_LIBTRACEEVENT=y to build builtin-trace.c and tools/perf/trace/beauty/ as we only ifdef setting CONFIG_TRACE=y when setting NO_LIBTRACEEVENT=1 in the make command line, not when we don't detect libtraceevent-devel installed in the system. Simplification here to avoid these two ways of disabling builtin-trace.c and not having CONFIG_TRACE=y when libtraceevent-devel isn't installed is the clean way. From Athira: <quote> tools/perf/arch/powerpc/util/Build -perf-y += kvm-stat.o +perf-$(CONFIG_LIBTRACEEVENT) += kvm-stat.o </quote> Then, ditto for arm64 and s390, detected by container cross build tests. - s/390 uses test__checkevent_tracepoint() that is now only available if HAVE_LIBTRACEEVENT is defined, enclose the callsite with ifder HAVE_LIBTRACEEVENT. Also from Athira: <quote> With this change, I could successfully compile in these environment: - Without libtraceevent-devel installed - With libtraceevent-devel installed - With “make NO_LIBTRACEEVENT=1” </quote> Then, finally rename CONFIG_TRACEEVENT to CONFIG_LIBTRACEEVENT for consistency with other libraries detected in tools/perf/. Signed-off-by: Ian Rogers <irogers@google.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Tested-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: bpf@vger.kernel.org Link: http://lore.kernel.org/lkml/20221205225940.3079667-3-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-12-05 14:59:39 -08:00
#ifdef HAVE_LIBTRACEEVENT
if (is_tracepoint(pevent))
obj = get_tracepoint_field(pevent, attr_name);
perf build: Use libtraceevent from the system Remove the LIBTRACEEVENT_DYNAMIC and LIBTRACEFS_DYNAMIC make command line variables. If libtraceevent isn't installed or NO_LIBTRACEEVENT=1 is passed to the build, don't compile in libtraceevent and libtracefs support. This also disables CONFIG_TRACE that controls "perf trace". CONFIG_LIBTRACEEVENT is used to control enablement in Build/Makefiles, HAVE_LIBTRACEEVENT is used in C code. Without HAVE_LIBTRACEEVENT tracepoints are disabled and as such the commands kmem, kwork, lock, sched and timechart are removed. The majority of commands continue to work including "perf test". Committer notes: Fixed up a tools/perf/util/Build reject and added: #include <traceevent/event-parse.h> to tools/perf/util/scripting-engines/trace-event-perl.c. Committer testing: $ rpm -qi libtraceevent-devel Name : libtraceevent-devel Version : 1.5.3 Release : 2.fc36 Architecture: x86_64 Install Date: Mon 25 Jul 2022 03:20:19 PM -03 Group : Unspecified Size : 27728 License : LGPLv2+ and GPLv2+ Signature : RSA/SHA256, Fri 15 Apr 2022 02:11:58 PM -03, Key ID 999f7cbf38ab71f4 Source RPM : libtraceevent-1.5.3-2.fc36.src.rpm Build Date : Fri 15 Apr 2022 10:57:01 AM -03 Build Host : buildvm-x86-05.iad2.fedoraproject.org Packager : Fedora Project Vendor : Fedora Project URL : https://git.kernel.org/pub/scm/libs/libtrace/libtraceevent.git/ Bug URL : https://bugz.fedoraproject.org/libtraceevent Summary : Development headers of libtraceevent Description : Development headers of libtraceevent-libs $ Default build: $ ldd ~/bin/perf | grep tracee libtraceevent.so.1 => /lib64/libtraceevent.so.1 (0x00007f1dcaf8f000) $ # perf trace -e sched:* --max-events 10 0.000 migration/0/17 sched:sched_migrate_task(comm: "", pid: 1603763 (perf), prio: 120, dest_cpu: 1) 0.005 migration/0/17 sched:sched_wake_idle_without_ipi(cpu: 1) 0.011 migration/0/17 sched:sched_switch(prev_comm: "", prev_pid: 17 (migration/0), prev_state: 1, next_comm: "", next_prio: 120) 1.173 :0/0 sched:sched_wakeup(comm: "", pid: 3138 (gnome-terminal-), prio: 120) 1.180 :0/0 sched:sched_switch(prev_comm: "", prev_prio: 120, next_comm: "", next_pid: 3138 (gnome-terminal-), next_prio: 120) 0.156 migration/1/21 sched:sched_migrate_task(comm: "", pid: 1603763 (perf), prio: 120, orig_cpu: 1, dest_cpu: 2) 0.160 migration/1/21 sched:sched_wake_idle_without_ipi(cpu: 2) 0.166 migration/1/21 sched:sched_switch(prev_comm: "", prev_pid: 21 (migration/1), prev_state: 1, next_comm: "", next_prio: 120) 1.183 :0/0 sched:sched_wakeup(comm: "", pid: 1602985 (kworker/u16:0-f), prio: 120, target_cpu: 1) 1.186 :0/0 sched:sched_switch(prev_comm: "", prev_prio: 120, next_comm: "", next_pid: 1602985 (kworker/u16:0-f), next_prio: 120) # Had to tweak tools/perf/util/setup.py to make sure the python binding shared object links with libtraceevent if -DHAVE_LIBTRACEEVENT is present in CFLAGS. Building with NO_LIBTRACEEVENT=1 uncovered some more build failures: - Make building of data-convert-bt.c to CONFIG_LIBTRACEEVENT=y - perf-$(CONFIG_LIBTRACEEVENT) += scripts/ - bpf_kwork.o needs also to be dependent on CONFIG_LIBTRACEEVENT=y - The python binding needed some fixups and util/trace-event.c can't be built and linked with the python binding shared object, so remove it in tools/perf/util/setup.py and exclude it from the list of dependencies in the python/perf.so Makefile.perf target. Building without libtraceevent-devel installed uncovered more build failures: - The python binding tools/perf/util/python.c was assuming that traceevent/parse-events.h was always available, which was the case when we defaulted to using the in-kernel tools/lib/traceevent/ files, now we need to enclose it under ifdef HAVE_LIBTRACEEVENT, just like the other parts of it that deal with tracepoints. - We have to ifdef the rules in the Build files with CONFIG_LIBTRACEEVENT=y to build builtin-trace.c and tools/perf/trace/beauty/ as we only ifdef setting CONFIG_TRACE=y when setting NO_LIBTRACEEVENT=1 in the make command line, not when we don't detect libtraceevent-devel installed in the system. Simplification here to avoid these two ways of disabling builtin-trace.c and not having CONFIG_TRACE=y when libtraceevent-devel isn't installed is the clean way. From Athira: <quote> tools/perf/arch/powerpc/util/Build -perf-y += kvm-stat.o +perf-$(CONFIG_LIBTRACEEVENT) += kvm-stat.o </quote> Then, ditto for arm64 and s390, detected by container cross build tests. - s/390 uses test__checkevent_tracepoint() that is now only available if HAVE_LIBTRACEEVENT is defined, enclose the callsite with ifder HAVE_LIBTRACEEVENT. Also from Athira: <quote> With this change, I could successfully compile in these environment: - Without libtraceevent-devel installed - With libtraceevent-devel installed - With “make NO_LIBTRACEEVENT=1” </quote> Then, finally rename CONFIG_TRACEEVENT to CONFIG_LIBTRACEEVENT for consistency with other libraries detected in tools/perf/. Signed-off-by: Ian Rogers <irogers@google.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Tested-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: bpf@vger.kernel.org Link: http://lore.kernel.org/lkml/20221205225940.3079667-3-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-12-05 14:59:39 -08:00
#endif
return obj ?: PyObject_GenericGetAttr((PyObject *) pevent, attr_name);
}
static PyTypeObject pyrf_sample_event__type = {
PyVarObject_HEAD_INIT(NULL, 0)
.tp_name = "perf.sample_event",
.tp_basicsize = sizeof(struct pyrf_event),
.tp_flags = Py_TPFLAGS_DEFAULT|Py_TPFLAGS_BASETYPE,
.tp_doc = pyrf_sample_event__doc,
.tp_members = pyrf_sample_event__members,
.tp_repr = (reprfunc)pyrf_sample_event__repr,
.tp_getattro = (getattrofunc) pyrf_sample_event__getattro,
};
perf python: Support the PERF_RECORD_SWITCH event To test it check tools/perf/python/twatch.py, after following the instructions there to enable context_switch, output looks like: [root@zoo linux]# tools/perf/python/twatch.py cpu: 1, pid: 31463, tid: 31463 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31463, switch_out: 0 } cpu: 2, pid: 31463, tid: 31496 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31496, switch_out: 0 } cpu: 2, pid: 31463, tid: 31496 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31496, switch_out: 1 } cpu: 3, pid: 31463, tid: 31527 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31527, switch_out: 0 } cpu: 1, pid: 31463, tid: 31463 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31463, switch_out: 1 } cpu: 3, pid: 31463, tid: 31527 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31527, switch_out: 1 } cpu: 1, pid: 31463, tid: 31463 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31463, switch_out: 0 } ^CTraceback (most recent call last): File "tools/perf/python/twatch.py", line 67, in <module> main(context_switch = 1, thread = 31463) File "tools/perf/python/twatch.py", line 40, in main evlist.poll(timeout = -1) KeyboardInterrupt [root@zoo linux]# Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Guy Streeter <streeter@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-1ukistmpamc5z717k80ctcp2@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-10-06 17:46:46 -03:00
static char pyrf_context_switch_event__doc[] = PyDoc_STR("perf context_switch event object.");
static PyMemberDef pyrf_context_switch_event__members[] = {
sample_members
member_def(perf_event_header, type, T_UINT, "event type"),
member_def(perf_record_switch, next_prev_pid, T_UINT, "next/prev pid"),
member_def(perf_record_switch, next_prev_tid, T_UINT, "next/prev tid"),
perf python: Support the PERF_RECORD_SWITCH event To test it check tools/perf/python/twatch.py, after following the instructions there to enable context_switch, output looks like: [root@zoo linux]# tools/perf/python/twatch.py cpu: 1, pid: 31463, tid: 31463 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31463, switch_out: 0 } cpu: 2, pid: 31463, tid: 31496 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31496, switch_out: 0 } cpu: 2, pid: 31463, tid: 31496 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31496, switch_out: 1 } cpu: 3, pid: 31463, tid: 31527 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31527, switch_out: 0 } cpu: 1, pid: 31463, tid: 31463 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31463, switch_out: 1 } cpu: 3, pid: 31463, tid: 31527 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31527, switch_out: 1 } cpu: 1, pid: 31463, tid: 31463 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31463, switch_out: 0 } ^CTraceback (most recent call last): File "tools/perf/python/twatch.py", line 67, in <module> main(context_switch = 1, thread = 31463) File "tools/perf/python/twatch.py", line 40, in main evlist.poll(timeout = -1) KeyboardInterrupt [root@zoo linux]# Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Guy Streeter <streeter@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-1ukistmpamc5z717k80ctcp2@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-10-06 17:46:46 -03:00
{ .name = NULL, },
};
static PyObject *pyrf_context_switch_event__repr(struct pyrf_event *pevent)
{
PyObject *ret;
char *s;
if (asprintf(&s, "{ type: context_switch, next_prev_pid: %u, next_prev_tid: %u, switch_out: %u }",
pevent->event.context_switch.next_prev_pid,
pevent->event.context_switch.next_prev_tid,
!!(pevent->event.header.misc & PERF_RECORD_MISC_SWITCH_OUT)) < 0) {
ret = PyErr_NoMemory();
} else {
perf tools: Add Python 3 support Added Python 3 support while keeping Python 2.7 compatibility. Committer notes: This doesn't make it to auto detect python 3, one has to explicitely ask it to build with python 3 devel files, here are the instructions provided by Jaroslav: --- $ cp -a tools/perf tools/python3-perf $ make V=1 prefix=/usr -C tools/perf PYTHON=/usr/bin/python2 all $ make V=1 prefix=/usr -C tools/python3-perf PYTHON=/usr/bin/python3 all $ make V=1 prefix=/usr -C tools/python3-perf PYTHON=/usr/bin/python3 DESTDIR=%{buildroot} install-python_ext $ make V=1 prefix=/usr -C tools/perf PYTHON=/usr/bin/python2 DESTDIR=%{buildroot} install-python_ext --- We need to make this automatic, just like the existing tests for checking if the python2 devel files are in place, allowing the build with python3 if available, fallbacking to python2 and then just disabling it if none are available. So, using the PYTHON variable to build it using O= we get: Before this patch: $ rpm -q python3 python3-devel python3-3.6.4-7.fc27.x86_64 python3-devel-3.6.4-7.fc27.x86_64 $ rm -rf /tmp/build/perf/ ; mkdir -p /tmp/build/perf ; make O=/tmp/build/perf PYTHON=/usr/bin/python3 -C tools/perf install-bin make: Entering directory '/home/acme/git/linux/tools/perf' <SNIP> Makefile.config:670: Python 3 is not yet supported; please set Makefile.config:671: PYTHON and/or PYTHON_CONFIG appropriately. Makefile.config:672: If you also have Python 2 installed, then Makefile.config:673: try something like: Makefile.config:674: Makefile.config:675: make PYTHON=python2 Makefile.config:676: Makefile.config:677: Otherwise, disable Python support entirely: Makefile.config:678: Makefile.config:679: make NO_LIBPYTHON=1 Makefile.config:680: Makefile.config:681: *** . Stop. make[1]: *** [Makefile.perf:212: sub-make] Error 2 make: *** [Makefile:110: install-bin] Error 2 make: Leaving directory '/home/acme/git/linux/tools/perf' $ After: $ make O=/tmp/build/perf PYTHON=python3 -C tools/perf install-bin $ ldd ~/bin/perf | grep python libpython3.6m.so.1.0 => /lib64/libpython3.6m.so.1.0 (0x00007f58a31e8000) $ rpm -qf /lib64/libpython3.6m.so.1.0 python3-libs-3.6.4-7.fc27.x86_64 $ Now verify that when using the binding the right ELF file is loaded, using perf trace: $ perf trace -e open* perf test python 0.051 ( 0.016 ms): perf/3927 openat(dfd: CWD, filename: /etc/ld.so.cache, flags: CLOEXEC ) = 3 <SNIP> 18: 'import perf' in python : 8.849 ( 0.013 ms): sh/3929 openat(dfd: CWD, filename: /etc/ld.so.cache, flags: CLOEXEC ) = 3 <SNIP> 25.572 ( 0.008 ms): python3/3931 openat(dfd: CWD, filename: /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so, flags: CLOEXEC) = 3 <SNIP> Ok <SNIP> $ And using tools/perf/python/twatch.py, to show PERF_RECORD_ metaevents: $ python3 tools/perf/python/twatch.py cpu: 3, pid: 16060, tid: 16060 { type: fork, pid: 5207, ppid: 16060, tid: 5207, ptid: 16060, time: 10798513015459} cpu: 3, pid: 16060, tid: 16060 { type: fork, pid: 5208, ppid: 16060, tid: 5208, ptid: 16060, time: 10798513562503} cpu: 0, pid: 5208, tid: 5208 { type: comm, pid: 5208, tid: 5208, comm: grep } cpu: 2, pid: 5207, tid: 5207 { type: comm, pid: 5207, tid: 5207, comm: ps } cpu: 2, pid: 5207, tid: 5207 { type: exit, pid: 5207, ppid: 5207, tid: 5207, ptid: 5207, time: 10798551337484} cpu: 3, pid: 5208, tid: 5208 { type: exit, pid: 5208, ppid: 5208, tid: 5208, ptid: 5208, time: 10798551292153} cpu: 3, pid: 601, tid: 601 { type: fork, pid: 5209, ppid: 601, tid: 5209, ptid: 601, time: 10801779977324} ^CTraceback (most recent call last): File "tools/perf/python/twatch.py", line 68, in <module> main() File "tools/perf/python/twatch.py", line 40, in main evlist.poll(timeout = -1) KeyboardInterrupt $ # ps ax|grep twatch 5197 pts/8 S+ 0:00 python3 tools/perf/python/twatch.py # ls -la /proc/5197/smaps -r--r--r--. 1 acme acme 0 Feb 19 13:14 /proc/5197/smaps # grep python /proc/5197/smaps 558111307000-558111309000 r-xp 00000000 fd:00 3151710 /usr/bin/python3.6 558111508000-558111509000 r--p 00001000 fd:00 3151710 /usr/bin/python3.6 558111509000-55811150a000 rw-p 00002000 fd:00 3151710 /usr/bin/python3.6 7ffad6fc1000-7ffad7008000 r-xp 00000000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so 7ffad7008000-7ffad7207000 ---p 00047000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so 7ffad7207000-7ffad7208000 r--p 00046000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so 7ffad7208000-7ffad7215000 rw-p 00047000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so 7ffadea77000-7ffaded3d000 r-xp 00000000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0 7ffaded3d000-7ffadef3c000 ---p 002c6000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0 7ffadef3c000-7ffadef42000 r--p 002c5000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0 7ffadef42000-7ffadefa5000 rw-p 002cb000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0 # And with this patch, but building normally, without specifying the PYTHON=python3 part, which will make it use python2 if its devel files are available, like in this test: $ make O=/tmp/build/perf -C tools/perf install-bin $ ldd ~/bin/perf | grep python libpython2.7.so.1.0 => /lib64/libpython2.7.so.1.0 (0x00007f6a44410000) $ ldd /tmp/build/perf/python_ext_build/lib/perf.so | grep python libpython2.7.so.1.0 => /lib64/libpython2.7.so.1.0 (0x00007fed28a2c000) $ [acme@jouet perf]$ tools/perf/python/twatch.py cpu: 0, pid: 2817, tid: 2817 { type: fork, pid: 2817, ppid: 2817, tid: 8910, ptid: 2817, time: 11126454335306} cpu: 0, pid: 2817, tid: 2817 { type: comm, pid: 2817, tid: 8910, comm: worker } $ ps ax | grep twatch.py 8909 pts/8 S+ 0:00 /usr/bin/python tools/perf/python/twatch.py $ grep python /proc/8909/smaps 5579de658000-5579de659000 r-xp 00000000 fd:00 3156044 /usr/bin/python2.7 5579de858000-5579de859000 r--p 00000000 fd:00 3156044 /usr/bin/python2.7 5579de859000-5579de85a000 rw-p 00001000 fd:00 3156044 /usr/bin/python2.7 7f0de01f7000-7f0de023e000 r-xp 00000000 00:2d 230695 /tmp/build/perf/python/perf.so 7f0de023e000-7f0de043d000 ---p 00047000 00:2d 230695 /tmp/build/perf/python/perf.so 7f0de043d000-7f0de043e000 r--p 00046000 00:2d 230695 /tmp/build/perf/python/perf.so 7f0de043e000-7f0de044b000 rw-p 00047000 00:2d 230695 /tmp/build/perf/python/perf.so 7f0de6f0f000-7f0de6f13000 r-xp 00000000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so 7f0de6f13000-7f0de7113000 ---p 00004000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so 7f0de7113000-7f0de7114000 r--p 00004000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so 7f0de7114000-7f0de7115000 rw-p 00005000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so 7f0de7e73000-7f0de8052000 r-xp 00000000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0 7f0de8052000-7f0de8251000 ---p 001df000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0 7f0de8251000-7f0de8255000 r--p 001de000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0 7f0de8255000-7f0de8291000 rw-p 001e2000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0 $ Signed-off-by: Jaroslav Škarvada <jskarvad@redhat.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> LPU-Reference: 20180119205641.24242-1-jskarvad@redhat.com Link: https://lkml.kernel.org/n/tip-8d7dt9kqp83vsz25hagug8fu@git.kernel.org [ Removed explicit check for python version, allowing it to really build with python3 ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-01-19 21:56:41 +01:00
ret = _PyUnicode_FromString(s);
perf python: Support the PERF_RECORD_SWITCH event To test it check tools/perf/python/twatch.py, after following the instructions there to enable context_switch, output looks like: [root@zoo linux]# tools/perf/python/twatch.py cpu: 1, pid: 31463, tid: 31463 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31463, switch_out: 0 } cpu: 2, pid: 31463, tid: 31496 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31496, switch_out: 0 } cpu: 2, pid: 31463, tid: 31496 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31496, switch_out: 1 } cpu: 3, pid: 31463, tid: 31527 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31527, switch_out: 0 } cpu: 1, pid: 31463, tid: 31463 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31463, switch_out: 1 } cpu: 3, pid: 31463, tid: 31527 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31527, switch_out: 1 } cpu: 1, pid: 31463, tid: 31463 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31463, switch_out: 0 } ^CTraceback (most recent call last): File "tools/perf/python/twatch.py", line 67, in <module> main(context_switch = 1, thread = 31463) File "tools/perf/python/twatch.py", line 40, in main evlist.poll(timeout = -1) KeyboardInterrupt [root@zoo linux]# Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Guy Streeter <streeter@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-1ukistmpamc5z717k80ctcp2@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-10-06 17:46:46 -03:00
free(s);
}
return ret;
}
static PyTypeObject pyrf_context_switch_event__type = {
PyVarObject_HEAD_INIT(NULL, 0)
.tp_name = "perf.context_switch_event",
.tp_basicsize = sizeof(struct pyrf_event),
.tp_flags = Py_TPFLAGS_DEFAULT|Py_TPFLAGS_BASETYPE,
.tp_doc = pyrf_context_switch_event__doc,
.tp_members = pyrf_context_switch_event__members,
.tp_repr = (reprfunc)pyrf_context_switch_event__repr,
};
perf tools: Initial python binding First clarifying that this kind of binding is not a replacement or an equivalent to the 'perf script' way of using python with perf. The 'perf script' way is to process events and look at a given script for some python function that matches the events to pass each event for processing. This is a python module, i.e. everything is driven from the python script, that merely uses "import perf" or "from perf import". perf script is focused on tracepoints, this binding is focused on profiling as an initial target. More work is needed to make available tracepoint specific variables as event variables accessible via this binding. There is one example of such usage model, in tools/perf/python/twatch.py, a tool to watch "cycles" events together with task (fork, exit) and comm perf events. For now, due to me not being able to grok how python distutils cope with building C extensions outside the sources dir the install target just builds it, I'm using it as: [root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/ [root@emilia linux]# tools/perf/python/twatch.py cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: } cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: } cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: } cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: } cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: } cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: } cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: } cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534} cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls } cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024} The first 8 mmap events in this 8 way machine are a mistery that is still being investigated. More of the tools/perf/util/ APIs will be exposed via this python binding as the need arises. For now the focus is on creating events and processing them, symbol resolution is an obvious next step, with tracepoint variables as a close second step. Cc: Clark Williams <williams@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
static int pyrf_event__setup_types(void)
{
int err;
pyrf_mmap_event__type.tp_new =
pyrf_task_event__type.tp_new =
pyrf_comm_event__type.tp_new =
pyrf_lost_event__type.tp_new =
pyrf_read_event__type.tp_new =
pyrf_sample_event__type.tp_new =
perf python: Support the PERF_RECORD_SWITCH event To test it check tools/perf/python/twatch.py, after following the instructions there to enable context_switch, output looks like: [root@zoo linux]# tools/perf/python/twatch.py cpu: 1, pid: 31463, tid: 31463 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31463, switch_out: 0 } cpu: 2, pid: 31463, tid: 31496 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31496, switch_out: 0 } cpu: 2, pid: 31463, tid: 31496 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31496, switch_out: 1 } cpu: 3, pid: 31463, tid: 31527 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31527, switch_out: 0 } cpu: 1, pid: 31463, tid: 31463 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31463, switch_out: 1 } cpu: 3, pid: 31463, tid: 31527 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31527, switch_out: 1 } cpu: 1, pid: 31463, tid: 31463 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31463, switch_out: 0 } ^CTraceback (most recent call last): File "tools/perf/python/twatch.py", line 67, in <module> main(context_switch = 1, thread = 31463) File "tools/perf/python/twatch.py", line 40, in main evlist.poll(timeout = -1) KeyboardInterrupt [root@zoo linux]# Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Guy Streeter <streeter@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-1ukistmpamc5z717k80ctcp2@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-10-06 17:46:46 -03:00
pyrf_context_switch_event__type.tp_new =
perf tools: Initial python binding First clarifying that this kind of binding is not a replacement or an equivalent to the 'perf script' way of using python with perf. The 'perf script' way is to process events and look at a given script for some python function that matches the events to pass each event for processing. This is a python module, i.e. everything is driven from the python script, that merely uses "import perf" or "from perf import". perf script is focused on tracepoints, this binding is focused on profiling as an initial target. More work is needed to make available tracepoint specific variables as event variables accessible via this binding. There is one example of such usage model, in tools/perf/python/twatch.py, a tool to watch "cycles" events together with task (fork, exit) and comm perf events. For now, due to me not being able to grok how python distutils cope with building C extensions outside the sources dir the install target just builds it, I'm using it as: [root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/ [root@emilia linux]# tools/perf/python/twatch.py cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: } cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: } cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: } cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: } cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: } cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: } cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: } cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534} cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls } cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024} The first 8 mmap events in this 8 way machine are a mistery that is still being investigated. More of the tools/perf/util/ APIs will be exposed via this python binding as the need arises. For now the focus is on creating events and processing them, symbol resolution is an obvious next step, with tracepoint variables as a close second step. Cc: Clark Williams <williams@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
pyrf_throttle_event__type.tp_new = PyType_GenericNew;
err = PyType_Ready(&pyrf_mmap_event__type);
if (err < 0)
goto out;
err = PyType_Ready(&pyrf_lost_event__type);
perf tools: Initial python binding First clarifying that this kind of binding is not a replacement or an equivalent to the 'perf script' way of using python with perf. The 'perf script' way is to process events and look at a given script for some python function that matches the events to pass each event for processing. This is a python module, i.e. everything is driven from the python script, that merely uses "import perf" or "from perf import". perf script is focused on tracepoints, this binding is focused on profiling as an initial target. More work is needed to make available tracepoint specific variables as event variables accessible via this binding. There is one example of such usage model, in tools/perf/python/twatch.py, a tool to watch "cycles" events together with task (fork, exit) and comm perf events. For now, due to me not being able to grok how python distutils cope with building C extensions outside the sources dir the install target just builds it, I'm using it as: [root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/ [root@emilia linux]# tools/perf/python/twatch.py cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: } cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: } cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: } cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: } cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: } cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: } cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: } cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534} cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls } cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024} The first 8 mmap events in this 8 way machine are a mistery that is still being investigated. More of the tools/perf/util/ APIs will be exposed via this python binding as the need arises. For now the focus is on creating events and processing them, symbol resolution is an obvious next step, with tracepoint variables as a close second step. Cc: Clark Williams <williams@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
if (err < 0)
goto out;
err = PyType_Ready(&pyrf_task_event__type);
if (err < 0)
goto out;
err = PyType_Ready(&pyrf_comm_event__type);
if (err < 0)
goto out;
err = PyType_Ready(&pyrf_throttle_event__type);
if (err < 0)
goto out;
err = PyType_Ready(&pyrf_read_event__type);
if (err < 0)
goto out;
err = PyType_Ready(&pyrf_sample_event__type);
if (err < 0)
goto out;
perf python: Support the PERF_RECORD_SWITCH event To test it check tools/perf/python/twatch.py, after following the instructions there to enable context_switch, output looks like: [root@zoo linux]# tools/perf/python/twatch.py cpu: 1, pid: 31463, tid: 31463 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31463, switch_out: 0 } cpu: 2, pid: 31463, tid: 31496 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31496, switch_out: 0 } cpu: 2, pid: 31463, tid: 31496 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31496, switch_out: 1 } cpu: 3, pid: 31463, tid: 31527 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31527, switch_out: 0 } cpu: 1, pid: 31463, tid: 31463 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31463, switch_out: 1 } cpu: 3, pid: 31463, tid: 31527 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31527, switch_out: 1 } cpu: 1, pid: 31463, tid: 31463 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31463, switch_out: 0 } ^CTraceback (most recent call last): File "tools/perf/python/twatch.py", line 67, in <module> main(context_switch = 1, thread = 31463) File "tools/perf/python/twatch.py", line 40, in main evlist.poll(timeout = -1) KeyboardInterrupt [root@zoo linux]# Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Guy Streeter <streeter@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-1ukistmpamc5z717k80ctcp2@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-10-06 17:46:46 -03:00
err = PyType_Ready(&pyrf_context_switch_event__type);
if (err < 0)
goto out;
perf tools: Initial python binding First clarifying that this kind of binding is not a replacement or an equivalent to the 'perf script' way of using python with perf. The 'perf script' way is to process events and look at a given script for some python function that matches the events to pass each event for processing. This is a python module, i.e. everything is driven from the python script, that merely uses "import perf" or "from perf import". perf script is focused on tracepoints, this binding is focused on profiling as an initial target. More work is needed to make available tracepoint specific variables as event variables accessible via this binding. There is one example of such usage model, in tools/perf/python/twatch.py, a tool to watch "cycles" events together with task (fork, exit) and comm perf events. For now, due to me not being able to grok how python distutils cope with building C extensions outside the sources dir the install target just builds it, I'm using it as: [root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/ [root@emilia linux]# tools/perf/python/twatch.py cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: } cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: } cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: } cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: } cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: } cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: } cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: } cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534} cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls } cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024} The first 8 mmap events in this 8 way machine are a mistery that is still being investigated. More of the tools/perf/util/ APIs will be exposed via this python binding as the need arises. For now the focus is on creating events and processing them, symbol resolution is an obvious next step, with tracepoint variables as a close second step. Cc: Clark Williams <williams@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
out:
return err;
}
static PyTypeObject *pyrf_event__type[] = {
[PERF_RECORD_MMAP] = &pyrf_mmap_event__type,
[PERF_RECORD_LOST] = &pyrf_lost_event__type,
perf tools: Initial python binding First clarifying that this kind of binding is not a replacement or an equivalent to the 'perf script' way of using python with perf. The 'perf script' way is to process events and look at a given script for some python function that matches the events to pass each event for processing. This is a python module, i.e. everything is driven from the python script, that merely uses "import perf" or "from perf import". perf script is focused on tracepoints, this binding is focused on profiling as an initial target. More work is needed to make available tracepoint specific variables as event variables accessible via this binding. There is one example of such usage model, in tools/perf/python/twatch.py, a tool to watch "cycles" events together with task (fork, exit) and comm perf events. For now, due to me not being able to grok how python distutils cope with building C extensions outside the sources dir the install target just builds it, I'm using it as: [root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/ [root@emilia linux]# tools/perf/python/twatch.py cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: } cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: } cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: } cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: } cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: } cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: } cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: } cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534} cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls } cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024} The first 8 mmap events in this 8 way machine are a mistery that is still being investigated. More of the tools/perf/util/ APIs will be exposed via this python binding as the need arises. For now the focus is on creating events and processing them, symbol resolution is an obvious next step, with tracepoint variables as a close second step. Cc: Clark Williams <williams@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
[PERF_RECORD_COMM] = &pyrf_comm_event__type,
[PERF_RECORD_EXIT] = &pyrf_task_event__type,
[PERF_RECORD_THROTTLE] = &pyrf_throttle_event__type,
[PERF_RECORD_UNTHROTTLE] = &pyrf_throttle_event__type,
[PERF_RECORD_FORK] = &pyrf_task_event__type,
[PERF_RECORD_READ] = &pyrf_read_event__type,
[PERF_RECORD_SAMPLE] = &pyrf_sample_event__type,
perf python: Support the PERF_RECORD_SWITCH event To test it check tools/perf/python/twatch.py, after following the instructions there to enable context_switch, output looks like: [root@zoo linux]# tools/perf/python/twatch.py cpu: 1, pid: 31463, tid: 31463 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31463, switch_out: 0 } cpu: 2, pid: 31463, tid: 31496 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31496, switch_out: 0 } cpu: 2, pid: 31463, tid: 31496 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31496, switch_out: 1 } cpu: 3, pid: 31463, tid: 31527 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31527, switch_out: 0 } cpu: 1, pid: 31463, tid: 31463 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31463, switch_out: 1 } cpu: 3, pid: 31463, tid: 31527 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31527, switch_out: 1 } cpu: 1, pid: 31463, tid: 31463 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31463, switch_out: 0 } ^CTraceback (most recent call last): File "tools/perf/python/twatch.py", line 67, in <module> main(context_switch = 1, thread = 31463) File "tools/perf/python/twatch.py", line 40, in main evlist.poll(timeout = -1) KeyboardInterrupt [root@zoo linux]# Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Guy Streeter <streeter@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-1ukistmpamc5z717k80ctcp2@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-10-06 17:46:46 -03:00
[PERF_RECORD_SWITCH] = &pyrf_context_switch_event__type,
[PERF_RECORD_SWITCH_CPU_WIDE] = &pyrf_context_switch_event__type,
perf tools: Initial python binding First clarifying that this kind of binding is not a replacement or an equivalent to the 'perf script' way of using python with perf. The 'perf script' way is to process events and look at a given script for some python function that matches the events to pass each event for processing. This is a python module, i.e. everything is driven from the python script, that merely uses "import perf" or "from perf import". perf script is focused on tracepoints, this binding is focused on profiling as an initial target. More work is needed to make available tracepoint specific variables as event variables accessible via this binding. There is one example of such usage model, in tools/perf/python/twatch.py, a tool to watch "cycles" events together with task (fork, exit) and comm perf events. For now, due to me not being able to grok how python distutils cope with building C extensions outside the sources dir the install target just builds it, I'm using it as: [root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/ [root@emilia linux]# tools/perf/python/twatch.py cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: } cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: } cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: } cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: } cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: } cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: } cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: } cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534} cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls } cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024} The first 8 mmap events in this 8 way machine are a mistery that is still being investigated. More of the tools/perf/util/ APIs will be exposed via this python binding as the need arises. For now the focus is on creating events and processing them, symbol resolution is an obvious next step, with tracepoint variables as a close second step. Cc: Clark Williams <williams@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
};
static PyObject *pyrf_event__new(union perf_event *event)
{
struct pyrf_event *pevent;
PyTypeObject *ptype;
perf python: Support the PERF_RECORD_SWITCH event To test it check tools/perf/python/twatch.py, after following the instructions there to enable context_switch, output looks like: [root@zoo linux]# tools/perf/python/twatch.py cpu: 1, pid: 31463, tid: 31463 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31463, switch_out: 0 } cpu: 2, pid: 31463, tid: 31496 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31496, switch_out: 0 } cpu: 2, pid: 31463, tid: 31496 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31496, switch_out: 1 } cpu: 3, pid: 31463, tid: 31527 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31527, switch_out: 0 } cpu: 1, pid: 31463, tid: 31463 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31463, switch_out: 1 } cpu: 3, pid: 31463, tid: 31527 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31527, switch_out: 1 } cpu: 1, pid: 31463, tid: 31463 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31463, switch_out: 0 } ^CTraceback (most recent call last): File "tools/perf/python/twatch.py", line 67, in <module> main(context_switch = 1, thread = 31463) File "tools/perf/python/twatch.py", line 40, in main evlist.poll(timeout = -1) KeyboardInterrupt [root@zoo linux]# Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Guy Streeter <streeter@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-1ukistmpamc5z717k80ctcp2@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-10-06 17:46:46 -03:00
if ((event->header.type < PERF_RECORD_MMAP ||
event->header.type > PERF_RECORD_SAMPLE) &&
!(event->header.type == PERF_RECORD_SWITCH ||
event->header.type == PERF_RECORD_SWITCH_CPU_WIDE))
perf tools: Initial python binding First clarifying that this kind of binding is not a replacement or an equivalent to the 'perf script' way of using python with perf. The 'perf script' way is to process events and look at a given script for some python function that matches the events to pass each event for processing. This is a python module, i.e. everything is driven from the python script, that merely uses "import perf" or "from perf import". perf script is focused on tracepoints, this binding is focused on profiling as an initial target. More work is needed to make available tracepoint specific variables as event variables accessible via this binding. There is one example of such usage model, in tools/perf/python/twatch.py, a tool to watch "cycles" events together with task (fork, exit) and comm perf events. For now, due to me not being able to grok how python distutils cope with building C extensions outside the sources dir the install target just builds it, I'm using it as: [root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/ [root@emilia linux]# tools/perf/python/twatch.py cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: } cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: } cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: } cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: } cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: } cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: } cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: } cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534} cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls } cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024} The first 8 mmap events in this 8 way machine are a mistery that is still being investigated. More of the tools/perf/util/ APIs will be exposed via this python binding as the need arises. For now the focus is on creating events and processing them, symbol resolution is an obvious next step, with tracepoint variables as a close second step. Cc: Clark Williams <williams@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
return NULL;
ptype = pyrf_event__type[event->header.type];
pevent = PyObject_New(struct pyrf_event, ptype);
if (pevent != NULL)
memcpy(&pevent->event, event, event->header.size);
return (PyObject *)pevent;
}
struct pyrf_cpu_map {
PyObject_HEAD
struct perf_cpu_map *cpus;
perf tools: Initial python binding First clarifying that this kind of binding is not a replacement or an equivalent to the 'perf script' way of using python with perf. The 'perf script' way is to process events and look at a given script for some python function that matches the events to pass each event for processing. This is a python module, i.e. everything is driven from the python script, that merely uses "import perf" or "from perf import". perf script is focused on tracepoints, this binding is focused on profiling as an initial target. More work is needed to make available tracepoint specific variables as event variables accessible via this binding. There is one example of such usage model, in tools/perf/python/twatch.py, a tool to watch "cycles" events together with task (fork, exit) and comm perf events. For now, due to me not being able to grok how python distutils cope with building C extensions outside the sources dir the install target just builds it, I'm using it as: [root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/ [root@emilia linux]# tools/perf/python/twatch.py cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: } cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: } cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: } cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: } cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: } cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: } cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: } cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534} cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls } cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024} The first 8 mmap events in this 8 way machine are a mistery that is still being investigated. More of the tools/perf/util/ APIs will be exposed via this python binding as the need arises. For now the focus is on creating events and processing them, symbol resolution is an obvious next step, with tracepoint variables as a close second step. Cc: Clark Williams <williams@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
};
static int pyrf_cpu_map__init(struct pyrf_cpu_map *pcpus,
PyObject *args, PyObject *kwargs)
{
static char *kwlist[] = { "cpustr", NULL };
perf tools: Initial python binding First clarifying that this kind of binding is not a replacement or an equivalent to the 'perf script' way of using python with perf. The 'perf script' way is to process events and look at a given script for some python function that matches the events to pass each event for processing. This is a python module, i.e. everything is driven from the python script, that merely uses "import perf" or "from perf import". perf script is focused on tracepoints, this binding is focused on profiling as an initial target. More work is needed to make available tracepoint specific variables as event variables accessible via this binding. There is one example of such usage model, in tools/perf/python/twatch.py, a tool to watch "cycles" events together with task (fork, exit) and comm perf events. For now, due to me not being able to grok how python distutils cope with building C extensions outside the sources dir the install target just builds it, I'm using it as: [root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/ [root@emilia linux]# tools/perf/python/twatch.py cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: } cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: } cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: } cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: } cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: } cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: } cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: } cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534} cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls } cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024} The first 8 mmap events in this 8 way machine are a mistery that is still being investigated. More of the tools/perf/util/ APIs will be exposed via this python binding as the need arises. For now the focus is on creating events and processing them, symbol resolution is an obvious next step, with tracepoint variables as a close second step. Cc: Clark Williams <williams@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
char *cpustr = NULL;
if (!PyArg_ParseTupleAndKeywords(args, kwargs, "|s",
kwlist, &cpustr))
return -1;
pcpus->cpus = perf_cpu_map__new(cpustr);
perf tools: Initial python binding First clarifying that this kind of binding is not a replacement or an equivalent to the 'perf script' way of using python with perf. The 'perf script' way is to process events and look at a given script for some python function that matches the events to pass each event for processing. This is a python module, i.e. everything is driven from the python script, that merely uses "import perf" or "from perf import". perf script is focused on tracepoints, this binding is focused on profiling as an initial target. More work is needed to make available tracepoint specific variables as event variables accessible via this binding. There is one example of such usage model, in tools/perf/python/twatch.py, a tool to watch "cycles" events together with task (fork, exit) and comm perf events. For now, due to me not being able to grok how python distutils cope with building C extensions outside the sources dir the install target just builds it, I'm using it as: [root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/ [root@emilia linux]# tools/perf/python/twatch.py cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: } cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: } cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: } cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: } cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: } cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: } cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: } cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534} cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls } cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024} The first 8 mmap events in this 8 way machine are a mistery that is still being investigated. More of the tools/perf/util/ APIs will be exposed via this python binding as the need arises. For now the focus is on creating events and processing them, symbol resolution is an obvious next step, with tracepoint variables as a close second step. Cc: Clark Williams <williams@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
if (pcpus->cpus == NULL)
return -1;
return 0;
}
static void pyrf_cpu_map__delete(struct pyrf_cpu_map *pcpus)
{
perf_cpu_map__put(pcpus->cpus);
perf tools: Add Python 3 support Added Python 3 support while keeping Python 2.7 compatibility. Committer notes: This doesn't make it to auto detect python 3, one has to explicitely ask it to build with python 3 devel files, here are the instructions provided by Jaroslav: --- $ cp -a tools/perf tools/python3-perf $ make V=1 prefix=/usr -C tools/perf PYTHON=/usr/bin/python2 all $ make V=1 prefix=/usr -C tools/python3-perf PYTHON=/usr/bin/python3 all $ make V=1 prefix=/usr -C tools/python3-perf PYTHON=/usr/bin/python3 DESTDIR=%{buildroot} install-python_ext $ make V=1 prefix=/usr -C tools/perf PYTHON=/usr/bin/python2 DESTDIR=%{buildroot} install-python_ext --- We need to make this automatic, just like the existing tests for checking if the python2 devel files are in place, allowing the build with python3 if available, fallbacking to python2 and then just disabling it if none are available. So, using the PYTHON variable to build it using O= we get: Before this patch: $ rpm -q python3 python3-devel python3-3.6.4-7.fc27.x86_64 python3-devel-3.6.4-7.fc27.x86_64 $ rm -rf /tmp/build/perf/ ; mkdir -p /tmp/build/perf ; make O=/tmp/build/perf PYTHON=/usr/bin/python3 -C tools/perf install-bin make: Entering directory '/home/acme/git/linux/tools/perf' <SNIP> Makefile.config:670: Python 3 is not yet supported; please set Makefile.config:671: PYTHON and/or PYTHON_CONFIG appropriately. Makefile.config:672: If you also have Python 2 installed, then Makefile.config:673: try something like: Makefile.config:674: Makefile.config:675: make PYTHON=python2 Makefile.config:676: Makefile.config:677: Otherwise, disable Python support entirely: Makefile.config:678: Makefile.config:679: make NO_LIBPYTHON=1 Makefile.config:680: Makefile.config:681: *** . Stop. make[1]: *** [Makefile.perf:212: sub-make] Error 2 make: *** [Makefile:110: install-bin] Error 2 make: Leaving directory '/home/acme/git/linux/tools/perf' $ After: $ make O=/tmp/build/perf PYTHON=python3 -C tools/perf install-bin $ ldd ~/bin/perf | grep python libpython3.6m.so.1.0 => /lib64/libpython3.6m.so.1.0 (0x00007f58a31e8000) $ rpm -qf /lib64/libpython3.6m.so.1.0 python3-libs-3.6.4-7.fc27.x86_64 $ Now verify that when using the binding the right ELF file is loaded, using perf trace: $ perf trace -e open* perf test python 0.051 ( 0.016 ms): perf/3927 openat(dfd: CWD, filename: /etc/ld.so.cache, flags: CLOEXEC ) = 3 <SNIP> 18: 'import perf' in python : 8.849 ( 0.013 ms): sh/3929 openat(dfd: CWD, filename: /etc/ld.so.cache, flags: CLOEXEC ) = 3 <SNIP> 25.572 ( 0.008 ms): python3/3931 openat(dfd: CWD, filename: /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so, flags: CLOEXEC) = 3 <SNIP> Ok <SNIP> $ And using tools/perf/python/twatch.py, to show PERF_RECORD_ metaevents: $ python3 tools/perf/python/twatch.py cpu: 3, pid: 16060, tid: 16060 { type: fork, pid: 5207, ppid: 16060, tid: 5207, ptid: 16060, time: 10798513015459} cpu: 3, pid: 16060, tid: 16060 { type: fork, pid: 5208, ppid: 16060, tid: 5208, ptid: 16060, time: 10798513562503} cpu: 0, pid: 5208, tid: 5208 { type: comm, pid: 5208, tid: 5208, comm: grep } cpu: 2, pid: 5207, tid: 5207 { type: comm, pid: 5207, tid: 5207, comm: ps } cpu: 2, pid: 5207, tid: 5207 { type: exit, pid: 5207, ppid: 5207, tid: 5207, ptid: 5207, time: 10798551337484} cpu: 3, pid: 5208, tid: 5208 { type: exit, pid: 5208, ppid: 5208, tid: 5208, ptid: 5208, time: 10798551292153} cpu: 3, pid: 601, tid: 601 { type: fork, pid: 5209, ppid: 601, tid: 5209, ptid: 601, time: 10801779977324} ^CTraceback (most recent call last): File "tools/perf/python/twatch.py", line 68, in <module> main() File "tools/perf/python/twatch.py", line 40, in main evlist.poll(timeout = -1) KeyboardInterrupt $ # ps ax|grep twatch 5197 pts/8 S+ 0:00 python3 tools/perf/python/twatch.py # ls -la /proc/5197/smaps -r--r--r--. 1 acme acme 0 Feb 19 13:14 /proc/5197/smaps # grep python /proc/5197/smaps 558111307000-558111309000 r-xp 00000000 fd:00 3151710 /usr/bin/python3.6 558111508000-558111509000 r--p 00001000 fd:00 3151710 /usr/bin/python3.6 558111509000-55811150a000 rw-p 00002000 fd:00 3151710 /usr/bin/python3.6 7ffad6fc1000-7ffad7008000 r-xp 00000000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so 7ffad7008000-7ffad7207000 ---p 00047000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so 7ffad7207000-7ffad7208000 r--p 00046000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so 7ffad7208000-7ffad7215000 rw-p 00047000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so 7ffadea77000-7ffaded3d000 r-xp 00000000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0 7ffaded3d000-7ffadef3c000 ---p 002c6000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0 7ffadef3c000-7ffadef42000 r--p 002c5000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0 7ffadef42000-7ffadefa5000 rw-p 002cb000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0 # And with this patch, but building normally, without specifying the PYTHON=python3 part, which will make it use python2 if its devel files are available, like in this test: $ make O=/tmp/build/perf -C tools/perf install-bin $ ldd ~/bin/perf | grep python libpython2.7.so.1.0 => /lib64/libpython2.7.so.1.0 (0x00007f6a44410000) $ ldd /tmp/build/perf/python_ext_build/lib/perf.so | grep python libpython2.7.so.1.0 => /lib64/libpython2.7.so.1.0 (0x00007fed28a2c000) $ [acme@jouet perf]$ tools/perf/python/twatch.py cpu: 0, pid: 2817, tid: 2817 { type: fork, pid: 2817, ppid: 2817, tid: 8910, ptid: 2817, time: 11126454335306} cpu: 0, pid: 2817, tid: 2817 { type: comm, pid: 2817, tid: 8910, comm: worker } $ ps ax | grep twatch.py 8909 pts/8 S+ 0:00 /usr/bin/python tools/perf/python/twatch.py $ grep python /proc/8909/smaps 5579de658000-5579de659000 r-xp 00000000 fd:00 3156044 /usr/bin/python2.7 5579de858000-5579de859000 r--p 00000000 fd:00 3156044 /usr/bin/python2.7 5579de859000-5579de85a000 rw-p 00001000 fd:00 3156044 /usr/bin/python2.7 7f0de01f7000-7f0de023e000 r-xp 00000000 00:2d 230695 /tmp/build/perf/python/perf.so 7f0de023e000-7f0de043d000 ---p 00047000 00:2d 230695 /tmp/build/perf/python/perf.so 7f0de043d000-7f0de043e000 r--p 00046000 00:2d 230695 /tmp/build/perf/python/perf.so 7f0de043e000-7f0de044b000 rw-p 00047000 00:2d 230695 /tmp/build/perf/python/perf.so 7f0de6f0f000-7f0de6f13000 r-xp 00000000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so 7f0de6f13000-7f0de7113000 ---p 00004000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so 7f0de7113000-7f0de7114000 r--p 00004000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so 7f0de7114000-7f0de7115000 rw-p 00005000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so 7f0de7e73000-7f0de8052000 r-xp 00000000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0 7f0de8052000-7f0de8251000 ---p 001df000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0 7f0de8251000-7f0de8255000 r--p 001de000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0 7f0de8255000-7f0de8291000 rw-p 001e2000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0 $ Signed-off-by: Jaroslav Škarvada <jskarvad@redhat.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> LPU-Reference: 20180119205641.24242-1-jskarvad@redhat.com Link: https://lkml.kernel.org/n/tip-8d7dt9kqp83vsz25hagug8fu@git.kernel.org [ Removed explicit check for python version, allowing it to really build with python3 ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-01-19 21:56:41 +01:00
Py_TYPE(pcpus)->tp_free((PyObject*)pcpus);
perf tools: Initial python binding First clarifying that this kind of binding is not a replacement or an equivalent to the 'perf script' way of using python with perf. The 'perf script' way is to process events and look at a given script for some python function that matches the events to pass each event for processing. This is a python module, i.e. everything is driven from the python script, that merely uses "import perf" or "from perf import". perf script is focused on tracepoints, this binding is focused on profiling as an initial target. More work is needed to make available tracepoint specific variables as event variables accessible via this binding. There is one example of such usage model, in tools/perf/python/twatch.py, a tool to watch "cycles" events together with task (fork, exit) and comm perf events. For now, due to me not being able to grok how python distutils cope with building C extensions outside the sources dir the install target just builds it, I'm using it as: [root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/ [root@emilia linux]# tools/perf/python/twatch.py cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: } cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: } cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: } cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: } cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: } cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: } cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: } cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534} cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls } cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024} The first 8 mmap events in this 8 way machine are a mistery that is still being investigated. More of the tools/perf/util/ APIs will be exposed via this python binding as the need arises. For now the focus is on creating events and processing them, symbol resolution is an obvious next step, with tracepoint variables as a close second step. Cc: Clark Williams <williams@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
}
static Py_ssize_t pyrf_cpu_map__length(PyObject *obj)
{
struct pyrf_cpu_map *pcpus = (void *)obj;
perf python: Fix cpu_map__item() building Value should be built as an integer. Switch some uses of perf_cpu_map to use the library API. Fixes: 6d18804b963b78dc ("perf cpumap: Give CPUs their own type") Signed-off-by: Ian Rogers <irogers@google.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: André Almeida <andrealmeid@collabora.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Darren Hart <dvhart@infradead.org> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Dmitriy Vyukov <dvyukov@google.com> Cc: Eric Dumazet <edumazet@google.com> Cc: German Gomez <german.gomez@arm.com> Cc: Ian Rogers <irogers@google.com> Cc: James Clark <james.clark@arm.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: John Garry <john.garry@huawei.com> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Madhavan Srinivasan <maddy@linux.ibm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Miaoqian Lin <linmq006@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Riccardo Mancini <rickyman7@gmail.com> Cc: Shunsuke Nakamura <nakamura.shun@fujitsu.com> Cc: Song Liu <song@kernel.org> Cc: Stephane Eranian <eranian@google.com> Cc: Stephen Brennan <stephen.s.brennan@oracle.com> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Thomas Richter <tmricht@linux.ibm.com> Cc: Yury Norov <yury.norov@gmail.com> Link: http://lore.kernel.org/lkml/20220122045811.3402706-2-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-01-21 20:58:09 -08:00
return perf_cpu_map__nr(pcpus->cpus);
perf tools: Initial python binding First clarifying that this kind of binding is not a replacement or an equivalent to the 'perf script' way of using python with perf. The 'perf script' way is to process events and look at a given script for some python function that matches the events to pass each event for processing. This is a python module, i.e. everything is driven from the python script, that merely uses "import perf" or "from perf import". perf script is focused on tracepoints, this binding is focused on profiling as an initial target. More work is needed to make available tracepoint specific variables as event variables accessible via this binding. There is one example of such usage model, in tools/perf/python/twatch.py, a tool to watch "cycles" events together with task (fork, exit) and comm perf events. For now, due to me not being able to grok how python distutils cope with building C extensions outside the sources dir the install target just builds it, I'm using it as: [root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/ [root@emilia linux]# tools/perf/python/twatch.py cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: } cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: } cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: } cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: } cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: } cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: } cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: } cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534} cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls } cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024} The first 8 mmap events in this 8 way machine are a mistery that is still being investigated. More of the tools/perf/util/ APIs will be exposed via this python binding as the need arises. For now the focus is on creating events and processing them, symbol resolution is an obvious next step, with tracepoint variables as a close second step. Cc: Clark Williams <williams@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
}
static PyObject *pyrf_cpu_map__item(PyObject *obj, Py_ssize_t i)
{
struct pyrf_cpu_map *pcpus = (void *)obj;
perf python: Fix cpu_map__item() building Value should be built as an integer. Switch some uses of perf_cpu_map to use the library API. Fixes: 6d18804b963b78dc ("perf cpumap: Give CPUs their own type") Signed-off-by: Ian Rogers <irogers@google.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: André Almeida <andrealmeid@collabora.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Darren Hart <dvhart@infradead.org> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Dmitriy Vyukov <dvyukov@google.com> Cc: Eric Dumazet <edumazet@google.com> Cc: German Gomez <german.gomez@arm.com> Cc: Ian Rogers <irogers@google.com> Cc: James Clark <james.clark@arm.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: John Garry <john.garry@huawei.com> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Madhavan Srinivasan <maddy@linux.ibm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Miaoqian Lin <linmq006@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Riccardo Mancini <rickyman7@gmail.com> Cc: Shunsuke Nakamura <nakamura.shun@fujitsu.com> Cc: Song Liu <song@kernel.org> Cc: Stephane Eranian <eranian@google.com> Cc: Stephen Brennan <stephen.s.brennan@oracle.com> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Thomas Richter <tmricht@linux.ibm.com> Cc: Yury Norov <yury.norov@gmail.com> Link: http://lore.kernel.org/lkml/20220122045811.3402706-2-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-01-21 20:58:09 -08:00
if (i >= perf_cpu_map__nr(pcpus->cpus))
perf tools: Initial python binding First clarifying that this kind of binding is not a replacement or an equivalent to the 'perf script' way of using python with perf. The 'perf script' way is to process events and look at a given script for some python function that matches the events to pass each event for processing. This is a python module, i.e. everything is driven from the python script, that merely uses "import perf" or "from perf import". perf script is focused on tracepoints, this binding is focused on profiling as an initial target. More work is needed to make available tracepoint specific variables as event variables accessible via this binding. There is one example of such usage model, in tools/perf/python/twatch.py, a tool to watch "cycles" events together with task (fork, exit) and comm perf events. For now, due to me not being able to grok how python distutils cope with building C extensions outside the sources dir the install target just builds it, I'm using it as: [root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/ [root@emilia linux]# tools/perf/python/twatch.py cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: } cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: } cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: } cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: } cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: } cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: } cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: } cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534} cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls } cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024} The first 8 mmap events in this 8 way machine are a mistery that is still being investigated. More of the tools/perf/util/ APIs will be exposed via this python binding as the need arises. For now the focus is on creating events and processing them, symbol resolution is an obvious next step, with tracepoint variables as a close second step. Cc: Clark Williams <williams@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
return NULL;
perf python: Fix cpu_map__item() building Value should be built as an integer. Switch some uses of perf_cpu_map to use the library API. Fixes: 6d18804b963b78dc ("perf cpumap: Give CPUs their own type") Signed-off-by: Ian Rogers <irogers@google.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: André Almeida <andrealmeid@collabora.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Darren Hart <dvhart@infradead.org> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Dmitriy Vyukov <dvyukov@google.com> Cc: Eric Dumazet <edumazet@google.com> Cc: German Gomez <german.gomez@arm.com> Cc: Ian Rogers <irogers@google.com> Cc: James Clark <james.clark@arm.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: John Garry <john.garry@huawei.com> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Madhavan Srinivasan <maddy@linux.ibm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Miaoqian Lin <linmq006@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Riccardo Mancini <rickyman7@gmail.com> Cc: Shunsuke Nakamura <nakamura.shun@fujitsu.com> Cc: Song Liu <song@kernel.org> Cc: Stephane Eranian <eranian@google.com> Cc: Stephen Brennan <stephen.s.brennan@oracle.com> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Thomas Richter <tmricht@linux.ibm.com> Cc: Yury Norov <yury.norov@gmail.com> Link: http://lore.kernel.org/lkml/20220122045811.3402706-2-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-01-21 20:58:09 -08:00
return Py_BuildValue("i", perf_cpu_map__cpu(pcpus->cpus, i).cpu);
perf tools: Initial python binding First clarifying that this kind of binding is not a replacement or an equivalent to the 'perf script' way of using python with perf. The 'perf script' way is to process events and look at a given script for some python function that matches the events to pass each event for processing. This is a python module, i.e. everything is driven from the python script, that merely uses "import perf" or "from perf import". perf script is focused on tracepoints, this binding is focused on profiling as an initial target. More work is needed to make available tracepoint specific variables as event variables accessible via this binding. There is one example of such usage model, in tools/perf/python/twatch.py, a tool to watch "cycles" events together with task (fork, exit) and comm perf events. For now, due to me not being able to grok how python distutils cope with building C extensions outside the sources dir the install target just builds it, I'm using it as: [root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/ [root@emilia linux]# tools/perf/python/twatch.py cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: } cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: } cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: } cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: } cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: } cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: } cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: } cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534} cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls } cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024} The first 8 mmap events in this 8 way machine are a mistery that is still being investigated. More of the tools/perf/util/ APIs will be exposed via this python binding as the need arises. For now the focus is on creating events and processing them, symbol resolution is an obvious next step, with tracepoint variables as a close second step. Cc: Clark Williams <williams@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
}
static PySequenceMethods pyrf_cpu_map__sequence_methods = {
.sq_length = pyrf_cpu_map__length,
.sq_item = pyrf_cpu_map__item,
};
static char pyrf_cpu_map__doc[] = PyDoc_STR("cpu map object.");
static PyTypeObject pyrf_cpu_map__type = {
PyVarObject_HEAD_INIT(NULL, 0)
.tp_name = "perf.cpu_map",
.tp_basicsize = sizeof(struct pyrf_cpu_map),
.tp_dealloc = (destructor)pyrf_cpu_map__delete,
.tp_flags = Py_TPFLAGS_DEFAULT|Py_TPFLAGS_BASETYPE,
.tp_doc = pyrf_cpu_map__doc,
.tp_as_sequence = &pyrf_cpu_map__sequence_methods,
.tp_init = (initproc)pyrf_cpu_map__init,
};
static int pyrf_cpu_map__setup_types(void)
{
pyrf_cpu_map__type.tp_new = PyType_GenericNew;
return PyType_Ready(&pyrf_cpu_map__type);
}
struct pyrf_thread_map {
PyObject_HEAD
struct perf_thread_map *threads;
perf tools: Initial python binding First clarifying that this kind of binding is not a replacement or an equivalent to the 'perf script' way of using python with perf. The 'perf script' way is to process events and look at a given script for some python function that matches the events to pass each event for processing. This is a python module, i.e. everything is driven from the python script, that merely uses "import perf" or "from perf import". perf script is focused on tracepoints, this binding is focused on profiling as an initial target. More work is needed to make available tracepoint specific variables as event variables accessible via this binding. There is one example of such usage model, in tools/perf/python/twatch.py, a tool to watch "cycles" events together with task (fork, exit) and comm perf events. For now, due to me not being able to grok how python distutils cope with building C extensions outside the sources dir the install target just builds it, I'm using it as: [root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/ [root@emilia linux]# tools/perf/python/twatch.py cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: } cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: } cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: } cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: } cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: } cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: } cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: } cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534} cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls } cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024} The first 8 mmap events in this 8 way machine are a mistery that is still being investigated. More of the tools/perf/util/ APIs will be exposed via this python binding as the need arises. For now the focus is on creating events and processing them, symbol resolution is an obvious next step, with tracepoint variables as a close second step. Cc: Clark Williams <williams@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
};
static int pyrf_thread_map__init(struct pyrf_thread_map *pthreads,
PyObject *args, PyObject *kwargs)
{
static char *kwlist[] = { "pid", "tid", "uid", NULL };
int pid = -1, tid = -1, uid = UINT_MAX;
perf tools: Initial python binding First clarifying that this kind of binding is not a replacement or an equivalent to the 'perf script' way of using python with perf. The 'perf script' way is to process events and look at a given script for some python function that matches the events to pass each event for processing. This is a python module, i.e. everything is driven from the python script, that merely uses "import perf" or "from perf import". perf script is focused on tracepoints, this binding is focused on profiling as an initial target. More work is needed to make available tracepoint specific variables as event variables accessible via this binding. There is one example of such usage model, in tools/perf/python/twatch.py, a tool to watch "cycles" events together with task (fork, exit) and comm perf events. For now, due to me not being able to grok how python distutils cope with building C extensions outside the sources dir the install target just builds it, I'm using it as: [root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/ [root@emilia linux]# tools/perf/python/twatch.py cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: } cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: } cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: } cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: } cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: } cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: } cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: } cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534} cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls } cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024} The first 8 mmap events in this 8 way machine are a mistery that is still being investigated. More of the tools/perf/util/ APIs will be exposed via this python binding as the need arises. For now the focus is on creating events and processing them, symbol resolution is an obvious next step, with tracepoint variables as a close second step. Cc: Clark Williams <williams@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
if (!PyArg_ParseTupleAndKeywords(args, kwargs, "|iii",
kwlist, &pid, &tid, &uid))
perf tools: Initial python binding First clarifying that this kind of binding is not a replacement or an equivalent to the 'perf script' way of using python with perf. The 'perf script' way is to process events and look at a given script for some python function that matches the events to pass each event for processing. This is a python module, i.e. everything is driven from the python script, that merely uses "import perf" or "from perf import". perf script is focused on tracepoints, this binding is focused on profiling as an initial target. More work is needed to make available tracepoint specific variables as event variables accessible via this binding. There is one example of such usage model, in tools/perf/python/twatch.py, a tool to watch "cycles" events together with task (fork, exit) and comm perf events. For now, due to me not being able to grok how python distutils cope with building C extensions outside the sources dir the install target just builds it, I'm using it as: [root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/ [root@emilia linux]# tools/perf/python/twatch.py cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: } cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: } cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: } cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: } cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: } cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: } cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: } cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534} cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls } cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024} The first 8 mmap events in this 8 way machine are a mistery that is still being investigated. More of the tools/perf/util/ APIs will be exposed via this python binding as the need arises. For now the focus is on creating events and processing them, symbol resolution is an obvious next step, with tracepoint variables as a close second step. Cc: Clark Williams <williams@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
return -1;
pthreads->threads = thread_map__new(pid, tid, uid);
perf tools: Initial python binding First clarifying that this kind of binding is not a replacement or an equivalent to the 'perf script' way of using python with perf. The 'perf script' way is to process events and look at a given script for some python function that matches the events to pass each event for processing. This is a python module, i.e. everything is driven from the python script, that merely uses "import perf" or "from perf import". perf script is focused on tracepoints, this binding is focused on profiling as an initial target. More work is needed to make available tracepoint specific variables as event variables accessible via this binding. There is one example of such usage model, in tools/perf/python/twatch.py, a tool to watch "cycles" events together with task (fork, exit) and comm perf events. For now, due to me not being able to grok how python distutils cope with building C extensions outside the sources dir the install target just builds it, I'm using it as: [root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/ [root@emilia linux]# tools/perf/python/twatch.py cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: } cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: } cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: } cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: } cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: } cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: } cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: } cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534} cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls } cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024} The first 8 mmap events in this 8 way machine are a mistery that is still being investigated. More of the tools/perf/util/ APIs will be exposed via this python binding as the need arises. For now the focus is on creating events and processing them, symbol resolution is an obvious next step, with tracepoint variables as a close second step. Cc: Clark Williams <williams@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
if (pthreads->threads == NULL)
return -1;
return 0;
}
static void pyrf_thread_map__delete(struct pyrf_thread_map *pthreads)
{
perf_thread_map__put(pthreads->threads);
perf tools: Add Python 3 support Added Python 3 support while keeping Python 2.7 compatibility. Committer notes: This doesn't make it to auto detect python 3, one has to explicitely ask it to build with python 3 devel files, here are the instructions provided by Jaroslav: --- $ cp -a tools/perf tools/python3-perf $ make V=1 prefix=/usr -C tools/perf PYTHON=/usr/bin/python2 all $ make V=1 prefix=/usr -C tools/python3-perf PYTHON=/usr/bin/python3 all $ make V=1 prefix=/usr -C tools/python3-perf PYTHON=/usr/bin/python3 DESTDIR=%{buildroot} install-python_ext $ make V=1 prefix=/usr -C tools/perf PYTHON=/usr/bin/python2 DESTDIR=%{buildroot} install-python_ext --- We need to make this automatic, just like the existing tests for checking if the python2 devel files are in place, allowing the build with python3 if available, fallbacking to python2 and then just disabling it if none are available. So, using the PYTHON variable to build it using O= we get: Before this patch: $ rpm -q python3 python3-devel python3-3.6.4-7.fc27.x86_64 python3-devel-3.6.4-7.fc27.x86_64 $ rm -rf /tmp/build/perf/ ; mkdir -p /tmp/build/perf ; make O=/tmp/build/perf PYTHON=/usr/bin/python3 -C tools/perf install-bin make: Entering directory '/home/acme/git/linux/tools/perf' <SNIP> Makefile.config:670: Python 3 is not yet supported; please set Makefile.config:671: PYTHON and/or PYTHON_CONFIG appropriately. Makefile.config:672: If you also have Python 2 installed, then Makefile.config:673: try something like: Makefile.config:674: Makefile.config:675: make PYTHON=python2 Makefile.config:676: Makefile.config:677: Otherwise, disable Python support entirely: Makefile.config:678: Makefile.config:679: make NO_LIBPYTHON=1 Makefile.config:680: Makefile.config:681: *** . Stop. make[1]: *** [Makefile.perf:212: sub-make] Error 2 make: *** [Makefile:110: install-bin] Error 2 make: Leaving directory '/home/acme/git/linux/tools/perf' $ After: $ make O=/tmp/build/perf PYTHON=python3 -C tools/perf install-bin $ ldd ~/bin/perf | grep python libpython3.6m.so.1.0 => /lib64/libpython3.6m.so.1.0 (0x00007f58a31e8000) $ rpm -qf /lib64/libpython3.6m.so.1.0 python3-libs-3.6.4-7.fc27.x86_64 $ Now verify that when using the binding the right ELF file is loaded, using perf trace: $ perf trace -e open* perf test python 0.051 ( 0.016 ms): perf/3927 openat(dfd: CWD, filename: /etc/ld.so.cache, flags: CLOEXEC ) = 3 <SNIP> 18: 'import perf' in python : 8.849 ( 0.013 ms): sh/3929 openat(dfd: CWD, filename: /etc/ld.so.cache, flags: CLOEXEC ) = 3 <SNIP> 25.572 ( 0.008 ms): python3/3931 openat(dfd: CWD, filename: /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so, flags: CLOEXEC) = 3 <SNIP> Ok <SNIP> $ And using tools/perf/python/twatch.py, to show PERF_RECORD_ metaevents: $ python3 tools/perf/python/twatch.py cpu: 3, pid: 16060, tid: 16060 { type: fork, pid: 5207, ppid: 16060, tid: 5207, ptid: 16060, time: 10798513015459} cpu: 3, pid: 16060, tid: 16060 { type: fork, pid: 5208, ppid: 16060, tid: 5208, ptid: 16060, time: 10798513562503} cpu: 0, pid: 5208, tid: 5208 { type: comm, pid: 5208, tid: 5208, comm: grep } cpu: 2, pid: 5207, tid: 5207 { type: comm, pid: 5207, tid: 5207, comm: ps } cpu: 2, pid: 5207, tid: 5207 { type: exit, pid: 5207, ppid: 5207, tid: 5207, ptid: 5207, time: 10798551337484} cpu: 3, pid: 5208, tid: 5208 { type: exit, pid: 5208, ppid: 5208, tid: 5208, ptid: 5208, time: 10798551292153} cpu: 3, pid: 601, tid: 601 { type: fork, pid: 5209, ppid: 601, tid: 5209, ptid: 601, time: 10801779977324} ^CTraceback (most recent call last): File "tools/perf/python/twatch.py", line 68, in <module> main() File "tools/perf/python/twatch.py", line 40, in main evlist.poll(timeout = -1) KeyboardInterrupt $ # ps ax|grep twatch 5197 pts/8 S+ 0:00 python3 tools/perf/python/twatch.py # ls -la /proc/5197/smaps -r--r--r--. 1 acme acme 0 Feb 19 13:14 /proc/5197/smaps # grep python /proc/5197/smaps 558111307000-558111309000 r-xp 00000000 fd:00 3151710 /usr/bin/python3.6 558111508000-558111509000 r--p 00001000 fd:00 3151710 /usr/bin/python3.6 558111509000-55811150a000 rw-p 00002000 fd:00 3151710 /usr/bin/python3.6 7ffad6fc1000-7ffad7008000 r-xp 00000000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so 7ffad7008000-7ffad7207000 ---p 00047000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so 7ffad7207000-7ffad7208000 r--p 00046000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so 7ffad7208000-7ffad7215000 rw-p 00047000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so 7ffadea77000-7ffaded3d000 r-xp 00000000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0 7ffaded3d000-7ffadef3c000 ---p 002c6000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0 7ffadef3c000-7ffadef42000 r--p 002c5000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0 7ffadef42000-7ffadefa5000 rw-p 002cb000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0 # And with this patch, but building normally, without specifying the PYTHON=python3 part, which will make it use python2 if its devel files are available, like in this test: $ make O=/tmp/build/perf -C tools/perf install-bin $ ldd ~/bin/perf | grep python libpython2.7.so.1.0 => /lib64/libpython2.7.so.1.0 (0x00007f6a44410000) $ ldd /tmp/build/perf/python_ext_build/lib/perf.so | grep python libpython2.7.so.1.0 => /lib64/libpython2.7.so.1.0 (0x00007fed28a2c000) $ [acme@jouet perf]$ tools/perf/python/twatch.py cpu: 0, pid: 2817, tid: 2817 { type: fork, pid: 2817, ppid: 2817, tid: 8910, ptid: 2817, time: 11126454335306} cpu: 0, pid: 2817, tid: 2817 { type: comm, pid: 2817, tid: 8910, comm: worker } $ ps ax | grep twatch.py 8909 pts/8 S+ 0:00 /usr/bin/python tools/perf/python/twatch.py $ grep python /proc/8909/smaps 5579de658000-5579de659000 r-xp 00000000 fd:00 3156044 /usr/bin/python2.7 5579de858000-5579de859000 r--p 00000000 fd:00 3156044 /usr/bin/python2.7 5579de859000-5579de85a000 rw-p 00001000 fd:00 3156044 /usr/bin/python2.7 7f0de01f7000-7f0de023e000 r-xp 00000000 00:2d 230695 /tmp/build/perf/python/perf.so 7f0de023e000-7f0de043d000 ---p 00047000 00:2d 230695 /tmp/build/perf/python/perf.so 7f0de043d000-7f0de043e000 r--p 00046000 00:2d 230695 /tmp/build/perf/python/perf.so 7f0de043e000-7f0de044b000 rw-p 00047000 00:2d 230695 /tmp/build/perf/python/perf.so 7f0de6f0f000-7f0de6f13000 r-xp 00000000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so 7f0de6f13000-7f0de7113000 ---p 00004000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so 7f0de7113000-7f0de7114000 r--p 00004000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so 7f0de7114000-7f0de7115000 rw-p 00005000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so 7f0de7e73000-7f0de8052000 r-xp 00000000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0 7f0de8052000-7f0de8251000 ---p 001df000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0 7f0de8251000-7f0de8255000 r--p 001de000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0 7f0de8255000-7f0de8291000 rw-p 001e2000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0 $ Signed-off-by: Jaroslav Škarvada <jskarvad@redhat.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> LPU-Reference: 20180119205641.24242-1-jskarvad@redhat.com Link: https://lkml.kernel.org/n/tip-8d7dt9kqp83vsz25hagug8fu@git.kernel.org [ Removed explicit check for python version, allowing it to really build with python3 ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-01-19 21:56:41 +01:00
Py_TYPE(pthreads)->tp_free((PyObject*)pthreads);
perf tools: Initial python binding First clarifying that this kind of binding is not a replacement or an equivalent to the 'perf script' way of using python with perf. The 'perf script' way is to process events and look at a given script for some python function that matches the events to pass each event for processing. This is a python module, i.e. everything is driven from the python script, that merely uses "import perf" or "from perf import". perf script is focused on tracepoints, this binding is focused on profiling as an initial target. More work is needed to make available tracepoint specific variables as event variables accessible via this binding. There is one example of such usage model, in tools/perf/python/twatch.py, a tool to watch "cycles" events together with task (fork, exit) and comm perf events. For now, due to me not being able to grok how python distutils cope with building C extensions outside the sources dir the install target just builds it, I'm using it as: [root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/ [root@emilia linux]# tools/perf/python/twatch.py cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: } cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: } cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: } cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: } cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: } cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: } cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: } cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534} cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls } cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024} The first 8 mmap events in this 8 way machine are a mistery that is still being investigated. More of the tools/perf/util/ APIs will be exposed via this python binding as the need arises. For now the focus is on creating events and processing them, symbol resolution is an obvious next step, with tracepoint variables as a close second step. Cc: Clark Williams <williams@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
}
static Py_ssize_t pyrf_thread_map__length(PyObject *obj)
{
struct pyrf_thread_map *pthreads = (void *)obj;
return perf_thread_map__nr(pthreads->threads);
perf tools: Initial python binding First clarifying that this kind of binding is not a replacement or an equivalent to the 'perf script' way of using python with perf. The 'perf script' way is to process events and look at a given script for some python function that matches the events to pass each event for processing. This is a python module, i.e. everything is driven from the python script, that merely uses "import perf" or "from perf import". perf script is focused on tracepoints, this binding is focused on profiling as an initial target. More work is needed to make available tracepoint specific variables as event variables accessible via this binding. There is one example of such usage model, in tools/perf/python/twatch.py, a tool to watch "cycles" events together with task (fork, exit) and comm perf events. For now, due to me not being able to grok how python distutils cope with building C extensions outside the sources dir the install target just builds it, I'm using it as: [root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/ [root@emilia linux]# tools/perf/python/twatch.py cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: } cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: } cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: } cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: } cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: } cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: } cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: } cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534} cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls } cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024} The first 8 mmap events in this 8 way machine are a mistery that is still being investigated. More of the tools/perf/util/ APIs will be exposed via this python binding as the need arises. For now the focus is on creating events and processing them, symbol resolution is an obvious next step, with tracepoint variables as a close second step. Cc: Clark Williams <williams@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
}
static PyObject *pyrf_thread_map__item(PyObject *obj, Py_ssize_t i)
{
struct pyrf_thread_map *pthreads = (void *)obj;
if (i >= perf_thread_map__nr(pthreads->threads))
perf tools: Initial python binding First clarifying that this kind of binding is not a replacement or an equivalent to the 'perf script' way of using python with perf. The 'perf script' way is to process events and look at a given script for some python function that matches the events to pass each event for processing. This is a python module, i.e. everything is driven from the python script, that merely uses "import perf" or "from perf import". perf script is focused on tracepoints, this binding is focused on profiling as an initial target. More work is needed to make available tracepoint specific variables as event variables accessible via this binding. There is one example of such usage model, in tools/perf/python/twatch.py, a tool to watch "cycles" events together with task (fork, exit) and comm perf events. For now, due to me not being able to grok how python distutils cope with building C extensions outside the sources dir the install target just builds it, I'm using it as: [root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/ [root@emilia linux]# tools/perf/python/twatch.py cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: } cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: } cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: } cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: } cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: } cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: } cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: } cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534} cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls } cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024} The first 8 mmap events in this 8 way machine are a mistery that is still being investigated. More of the tools/perf/util/ APIs will be exposed via this python binding as the need arises. For now the focus is on creating events and processing them, symbol resolution is an obvious next step, with tracepoint variables as a close second step. Cc: Clark Williams <williams@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
return NULL;
return Py_BuildValue("i", perf_thread_map__pid(pthreads->threads, i));
perf tools: Initial python binding First clarifying that this kind of binding is not a replacement or an equivalent to the 'perf script' way of using python with perf. The 'perf script' way is to process events and look at a given script for some python function that matches the events to pass each event for processing. This is a python module, i.e. everything is driven from the python script, that merely uses "import perf" or "from perf import". perf script is focused on tracepoints, this binding is focused on profiling as an initial target. More work is needed to make available tracepoint specific variables as event variables accessible via this binding. There is one example of such usage model, in tools/perf/python/twatch.py, a tool to watch "cycles" events together with task (fork, exit) and comm perf events. For now, due to me not being able to grok how python distutils cope with building C extensions outside the sources dir the install target just builds it, I'm using it as: [root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/ [root@emilia linux]# tools/perf/python/twatch.py cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: } cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: } cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: } cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: } cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: } cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: } cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: } cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534} cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls } cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024} The first 8 mmap events in this 8 way machine are a mistery that is still being investigated. More of the tools/perf/util/ APIs will be exposed via this python binding as the need arises. For now the focus is on creating events and processing them, symbol resolution is an obvious next step, with tracepoint variables as a close second step. Cc: Clark Williams <williams@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
}
static PySequenceMethods pyrf_thread_map__sequence_methods = {
.sq_length = pyrf_thread_map__length,
.sq_item = pyrf_thread_map__item,
};
static char pyrf_thread_map__doc[] = PyDoc_STR("thread map object.");
static PyTypeObject pyrf_thread_map__type = {
PyVarObject_HEAD_INIT(NULL, 0)
.tp_name = "perf.thread_map",
.tp_basicsize = sizeof(struct pyrf_thread_map),
.tp_dealloc = (destructor)pyrf_thread_map__delete,
.tp_flags = Py_TPFLAGS_DEFAULT|Py_TPFLAGS_BASETYPE,
.tp_doc = pyrf_thread_map__doc,
.tp_as_sequence = &pyrf_thread_map__sequence_methods,
.tp_init = (initproc)pyrf_thread_map__init,
};
static int pyrf_thread_map__setup_types(void)
{
pyrf_thread_map__type.tp_new = PyType_GenericNew;
return PyType_Ready(&pyrf_thread_map__type);
}
struct pyrf_evsel {
PyObject_HEAD
struct evsel evsel;
perf tools: Initial python binding First clarifying that this kind of binding is not a replacement or an equivalent to the 'perf script' way of using python with perf. The 'perf script' way is to process events and look at a given script for some python function that matches the events to pass each event for processing. This is a python module, i.e. everything is driven from the python script, that merely uses "import perf" or "from perf import". perf script is focused on tracepoints, this binding is focused on profiling as an initial target. More work is needed to make available tracepoint specific variables as event variables accessible via this binding. There is one example of such usage model, in tools/perf/python/twatch.py, a tool to watch "cycles" events together with task (fork, exit) and comm perf events. For now, due to me not being able to grok how python distutils cope with building C extensions outside the sources dir the install target just builds it, I'm using it as: [root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/ [root@emilia linux]# tools/perf/python/twatch.py cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: } cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: } cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: } cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: } cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: } cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: } cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: } cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534} cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls } cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024} The first 8 mmap events in this 8 way machine are a mistery that is still being investigated. More of the tools/perf/util/ APIs will be exposed via this python binding as the need arises. For now the focus is on creating events and processing them, symbol resolution is an obvious next step, with tracepoint variables as a close second step. Cc: Clark Williams <williams@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
};
static int pyrf_evsel__init(struct pyrf_evsel *pevsel,
PyObject *args, PyObject *kwargs)
{
struct perf_event_attr attr = {
.type = PERF_TYPE_HARDWARE,
.config = PERF_COUNT_HW_CPU_CYCLES,
.sample_type = PERF_SAMPLE_PERIOD | PERF_SAMPLE_TID,
};
static char *kwlist[] = {
"type",
"config",
"sample_freq",
"sample_period",
"sample_type",
"read_format",
"disabled",
"inherit",
"pinned",
"exclusive",
"exclude_user",
"exclude_kernel",
"exclude_hv",
"exclude_idle",
"mmap",
perf python: Support the PERF_RECORD_SWITCH event To test it check tools/perf/python/twatch.py, after following the instructions there to enable context_switch, output looks like: [root@zoo linux]# tools/perf/python/twatch.py cpu: 1, pid: 31463, tid: 31463 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31463, switch_out: 0 } cpu: 2, pid: 31463, tid: 31496 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31496, switch_out: 0 } cpu: 2, pid: 31463, tid: 31496 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31496, switch_out: 1 } cpu: 3, pid: 31463, tid: 31527 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31527, switch_out: 0 } cpu: 1, pid: 31463, tid: 31463 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31463, switch_out: 1 } cpu: 3, pid: 31463, tid: 31527 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31527, switch_out: 1 } cpu: 1, pid: 31463, tid: 31463 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31463, switch_out: 0 } ^CTraceback (most recent call last): File "tools/perf/python/twatch.py", line 67, in <module> main(context_switch = 1, thread = 31463) File "tools/perf/python/twatch.py", line 40, in main evlist.poll(timeout = -1) KeyboardInterrupt [root@zoo linux]# Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Guy Streeter <streeter@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-1ukistmpamc5z717k80ctcp2@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-10-06 17:46:46 -03:00
"context_switch",
perf tools: Initial python binding First clarifying that this kind of binding is not a replacement or an equivalent to the 'perf script' way of using python with perf. The 'perf script' way is to process events and look at a given script for some python function that matches the events to pass each event for processing. This is a python module, i.e. everything is driven from the python script, that merely uses "import perf" or "from perf import". perf script is focused on tracepoints, this binding is focused on profiling as an initial target. More work is needed to make available tracepoint specific variables as event variables accessible via this binding. There is one example of such usage model, in tools/perf/python/twatch.py, a tool to watch "cycles" events together with task (fork, exit) and comm perf events. For now, due to me not being able to grok how python distutils cope with building C extensions outside the sources dir the install target just builds it, I'm using it as: [root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/ [root@emilia linux]# tools/perf/python/twatch.py cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: } cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: } cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: } cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: } cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: } cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: } cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: } cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534} cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls } cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024} The first 8 mmap events in this 8 way machine are a mistery that is still being investigated. More of the tools/perf/util/ APIs will be exposed via this python binding as the need arises. For now the focus is on creating events and processing them, symbol resolution is an obvious next step, with tracepoint variables as a close second step. Cc: Clark Williams <williams@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
"comm",
"freq",
"inherit_stat",
"enable_on_exec",
"task",
"watermark",
"precise_ip",
"mmap_data",
"sample_id_all",
"wakeup_events",
"bp_type",
"bp_addr",
"bp_len",
NULL
};
perf tools: Initial python binding First clarifying that this kind of binding is not a replacement or an equivalent to the 'perf script' way of using python with perf. The 'perf script' way is to process events and look at a given script for some python function that matches the events to pass each event for processing. This is a python module, i.e. everything is driven from the python script, that merely uses "import perf" or "from perf import". perf script is focused on tracepoints, this binding is focused on profiling as an initial target. More work is needed to make available tracepoint specific variables as event variables accessible via this binding. There is one example of such usage model, in tools/perf/python/twatch.py, a tool to watch "cycles" events together with task (fork, exit) and comm perf events. For now, due to me not being able to grok how python distutils cope with building C extensions outside the sources dir the install target just builds it, I'm using it as: [root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/ [root@emilia linux]# tools/perf/python/twatch.py cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: } cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: } cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: } cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: } cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: } cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: } cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: } cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534} cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls } cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024} The first 8 mmap events in this 8 way machine are a mistery that is still being investigated. More of the tools/perf/util/ APIs will be exposed via this python binding as the need arises. For now the focus is on creating events and processing them, symbol resolution is an obvious next step, with tracepoint variables as a close second step. Cc: Clark Williams <williams@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
u64 sample_period = 0;
u32 disabled = 0,
inherit = 0,
pinned = 0,
exclusive = 0,
exclude_user = 0,
exclude_kernel = 0,
exclude_hv = 0,
exclude_idle = 0,
mmap = 0,
perf python: Support the PERF_RECORD_SWITCH event To test it check tools/perf/python/twatch.py, after following the instructions there to enable context_switch, output looks like: [root@zoo linux]# tools/perf/python/twatch.py cpu: 1, pid: 31463, tid: 31463 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31463, switch_out: 0 } cpu: 2, pid: 31463, tid: 31496 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31496, switch_out: 0 } cpu: 2, pid: 31463, tid: 31496 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31496, switch_out: 1 } cpu: 3, pid: 31463, tid: 31527 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31527, switch_out: 0 } cpu: 1, pid: 31463, tid: 31463 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31463, switch_out: 1 } cpu: 3, pid: 31463, tid: 31527 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31527, switch_out: 1 } cpu: 1, pid: 31463, tid: 31463 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31463, switch_out: 0 } ^CTraceback (most recent call last): File "tools/perf/python/twatch.py", line 67, in <module> main(context_switch = 1, thread = 31463) File "tools/perf/python/twatch.py", line 40, in main evlist.poll(timeout = -1) KeyboardInterrupt [root@zoo linux]# Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Guy Streeter <streeter@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-1ukistmpamc5z717k80ctcp2@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-10-06 17:46:46 -03:00
context_switch = 0,
perf tools: Initial python binding First clarifying that this kind of binding is not a replacement or an equivalent to the 'perf script' way of using python with perf. The 'perf script' way is to process events and look at a given script for some python function that matches the events to pass each event for processing. This is a python module, i.e. everything is driven from the python script, that merely uses "import perf" or "from perf import". perf script is focused on tracepoints, this binding is focused on profiling as an initial target. More work is needed to make available tracepoint specific variables as event variables accessible via this binding. There is one example of such usage model, in tools/perf/python/twatch.py, a tool to watch "cycles" events together with task (fork, exit) and comm perf events. For now, due to me not being able to grok how python distutils cope with building C extensions outside the sources dir the install target just builds it, I'm using it as: [root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/ [root@emilia linux]# tools/perf/python/twatch.py cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: } cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: } cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: } cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: } cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: } cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: } cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: } cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534} cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls } cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024} The first 8 mmap events in this 8 way machine are a mistery that is still being investigated. More of the tools/perf/util/ APIs will be exposed via this python binding as the need arises. For now the focus is on creating events and processing them, symbol resolution is an obvious next step, with tracepoint variables as a close second step. Cc: Clark Williams <williams@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
comm = 0,
freq = 1,
inherit_stat = 0,
enable_on_exec = 0,
task = 0,
watermark = 0,
precise_ip = 0,
mmap_data = 0,
sample_id_all = 1;
int idx = 0;
if (!PyArg_ParseTupleAndKeywords(args, kwargs,
perf python: Support the PERF_RECORD_SWITCH event To test it check tools/perf/python/twatch.py, after following the instructions there to enable context_switch, output looks like: [root@zoo linux]# tools/perf/python/twatch.py cpu: 1, pid: 31463, tid: 31463 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31463, switch_out: 0 } cpu: 2, pid: 31463, tid: 31496 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31496, switch_out: 0 } cpu: 2, pid: 31463, tid: 31496 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31496, switch_out: 1 } cpu: 3, pid: 31463, tid: 31527 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31527, switch_out: 0 } cpu: 1, pid: 31463, tid: 31463 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31463, switch_out: 1 } cpu: 3, pid: 31463, tid: 31527 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31527, switch_out: 1 } cpu: 1, pid: 31463, tid: 31463 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31463, switch_out: 0 } ^CTraceback (most recent call last): File "tools/perf/python/twatch.py", line 67, in <module> main(context_switch = 1, thread = 31463) File "tools/perf/python/twatch.py", line 40, in main evlist.poll(timeout = -1) KeyboardInterrupt [root@zoo linux]# Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Guy Streeter <streeter@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-1ukistmpamc5z717k80ctcp2@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-10-06 17:46:46 -03:00
"|iKiKKiiiiiiiiiiiiiiiiiiiiiiKK", kwlist,
perf tools: Initial python binding First clarifying that this kind of binding is not a replacement or an equivalent to the 'perf script' way of using python with perf. The 'perf script' way is to process events and look at a given script for some python function that matches the events to pass each event for processing. This is a python module, i.e. everything is driven from the python script, that merely uses "import perf" or "from perf import". perf script is focused on tracepoints, this binding is focused on profiling as an initial target. More work is needed to make available tracepoint specific variables as event variables accessible via this binding. There is one example of such usage model, in tools/perf/python/twatch.py, a tool to watch "cycles" events together with task (fork, exit) and comm perf events. For now, due to me not being able to grok how python distutils cope with building C extensions outside the sources dir the install target just builds it, I'm using it as: [root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/ [root@emilia linux]# tools/perf/python/twatch.py cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: } cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: } cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: } cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: } cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: } cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: } cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: } cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534} cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls } cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024} The first 8 mmap events in this 8 way machine are a mistery that is still being investigated. More of the tools/perf/util/ APIs will be exposed via this python binding as the need arises. For now the focus is on creating events and processing them, symbol resolution is an obvious next step, with tracepoint variables as a close second step. Cc: Clark Williams <williams@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
&attr.type, &attr.config, &attr.sample_freq,
&sample_period, &attr.sample_type,
&attr.read_format, &disabled, &inherit,
&pinned, &exclusive, &exclude_user,
&exclude_kernel, &exclude_hv, &exclude_idle,
perf python: Support the PERF_RECORD_SWITCH event To test it check tools/perf/python/twatch.py, after following the instructions there to enable context_switch, output looks like: [root@zoo linux]# tools/perf/python/twatch.py cpu: 1, pid: 31463, tid: 31463 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31463, switch_out: 0 } cpu: 2, pid: 31463, tid: 31496 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31496, switch_out: 0 } cpu: 2, pid: 31463, tid: 31496 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31496, switch_out: 1 } cpu: 3, pid: 31463, tid: 31527 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31527, switch_out: 0 } cpu: 1, pid: 31463, tid: 31463 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31463, switch_out: 1 } cpu: 3, pid: 31463, tid: 31527 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31527, switch_out: 1 } cpu: 1, pid: 31463, tid: 31463 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31463, switch_out: 0 } ^CTraceback (most recent call last): File "tools/perf/python/twatch.py", line 67, in <module> main(context_switch = 1, thread = 31463) File "tools/perf/python/twatch.py", line 40, in main evlist.poll(timeout = -1) KeyboardInterrupt [root@zoo linux]# Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Guy Streeter <streeter@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-1ukistmpamc5z717k80ctcp2@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-10-06 17:46:46 -03:00
&mmap, &context_switch, &comm, &freq, &inherit_stat,
perf tools: Initial python binding First clarifying that this kind of binding is not a replacement or an equivalent to the 'perf script' way of using python with perf. The 'perf script' way is to process events and look at a given script for some python function that matches the events to pass each event for processing. This is a python module, i.e. everything is driven from the python script, that merely uses "import perf" or "from perf import". perf script is focused on tracepoints, this binding is focused on profiling as an initial target. More work is needed to make available tracepoint specific variables as event variables accessible via this binding. There is one example of such usage model, in tools/perf/python/twatch.py, a tool to watch "cycles" events together with task (fork, exit) and comm perf events. For now, due to me not being able to grok how python distutils cope with building C extensions outside the sources dir the install target just builds it, I'm using it as: [root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/ [root@emilia linux]# tools/perf/python/twatch.py cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: } cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: } cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: } cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: } cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: } cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: } cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: } cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534} cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls } cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024} The first 8 mmap events in this 8 way machine are a mistery that is still being investigated. More of the tools/perf/util/ APIs will be exposed via this python binding as the need arises. For now the focus is on creating events and processing them, symbol resolution is an obvious next step, with tracepoint variables as a close second step. Cc: Clark Williams <williams@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
&enable_on_exec, &task, &watermark,
&precise_ip, &mmap_data, &sample_id_all,
&attr.wakeup_events, &attr.bp_type,
&attr.bp_addr, &attr.bp_len, &idx))
return -1;
/* union... */
if (sample_period != 0) {
if (attr.sample_freq != 0)
return -1; /* FIXME: throw right exception */
attr.sample_period = sample_period;
}
/* Bitfields */
attr.disabled = disabled;
attr.inherit = inherit;
attr.pinned = pinned;
attr.exclusive = exclusive;
attr.exclude_user = exclude_user;
attr.exclude_kernel = exclude_kernel;
attr.exclude_hv = exclude_hv;
attr.exclude_idle = exclude_idle;
attr.mmap = mmap;
perf python: Support the PERF_RECORD_SWITCH event To test it check tools/perf/python/twatch.py, after following the instructions there to enable context_switch, output looks like: [root@zoo linux]# tools/perf/python/twatch.py cpu: 1, pid: 31463, tid: 31463 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31463, switch_out: 0 } cpu: 2, pid: 31463, tid: 31496 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31496, switch_out: 0 } cpu: 2, pid: 31463, tid: 31496 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31496, switch_out: 1 } cpu: 3, pid: 31463, tid: 31527 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31527, switch_out: 0 } cpu: 1, pid: 31463, tid: 31463 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31463, switch_out: 1 } cpu: 3, pid: 31463, tid: 31527 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31527, switch_out: 1 } cpu: 1, pid: 31463, tid: 31463 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31463, switch_out: 0 } ^CTraceback (most recent call last): File "tools/perf/python/twatch.py", line 67, in <module> main(context_switch = 1, thread = 31463) File "tools/perf/python/twatch.py", line 40, in main evlist.poll(timeout = -1) KeyboardInterrupt [root@zoo linux]# Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Guy Streeter <streeter@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-1ukistmpamc5z717k80ctcp2@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-10-06 17:46:46 -03:00
attr.context_switch = context_switch;
perf tools: Initial python binding First clarifying that this kind of binding is not a replacement or an equivalent to the 'perf script' way of using python with perf. The 'perf script' way is to process events and look at a given script for some python function that matches the events to pass each event for processing. This is a python module, i.e. everything is driven from the python script, that merely uses "import perf" or "from perf import". perf script is focused on tracepoints, this binding is focused on profiling as an initial target. More work is needed to make available tracepoint specific variables as event variables accessible via this binding. There is one example of such usage model, in tools/perf/python/twatch.py, a tool to watch "cycles" events together with task (fork, exit) and comm perf events. For now, due to me not being able to grok how python distutils cope with building C extensions outside the sources dir the install target just builds it, I'm using it as: [root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/ [root@emilia linux]# tools/perf/python/twatch.py cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: } cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: } cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: } cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: } cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: } cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: } cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: } cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534} cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls } cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024} The first 8 mmap events in this 8 way machine are a mistery that is still being investigated. More of the tools/perf/util/ APIs will be exposed via this python binding as the need arises. For now the focus is on creating events and processing them, symbol resolution is an obvious next step, with tracepoint variables as a close second step. Cc: Clark Williams <williams@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
attr.comm = comm;
attr.freq = freq;
attr.inherit_stat = inherit_stat;
attr.enable_on_exec = enable_on_exec;
attr.task = task;
attr.watermark = watermark;
attr.precise_ip = precise_ip;
attr.mmap_data = mmap_data;
attr.sample_id_all = sample_id_all;
attr.size = sizeof(attr);
perf tools: Initial python binding First clarifying that this kind of binding is not a replacement or an equivalent to the 'perf script' way of using python with perf. The 'perf script' way is to process events and look at a given script for some python function that matches the events to pass each event for processing. This is a python module, i.e. everything is driven from the python script, that merely uses "import perf" or "from perf import". perf script is focused on tracepoints, this binding is focused on profiling as an initial target. More work is needed to make available tracepoint specific variables as event variables accessible via this binding. There is one example of such usage model, in tools/perf/python/twatch.py, a tool to watch "cycles" events together with task (fork, exit) and comm perf events. For now, due to me not being able to grok how python distutils cope with building C extensions outside the sources dir the install target just builds it, I'm using it as: [root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/ [root@emilia linux]# tools/perf/python/twatch.py cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: } cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: } cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: } cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: } cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: } cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: } cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: } cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534} cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls } cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024} The first 8 mmap events in this 8 way machine are a mistery that is still being investigated. More of the tools/perf/util/ APIs will be exposed via this python binding as the need arises. For now the focus is on creating events and processing them, symbol resolution is an obvious next step, with tracepoint variables as a close second step. Cc: Clark Williams <williams@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
evsel__init(&pevsel->evsel, &attr, idx);
perf tools: Initial python binding First clarifying that this kind of binding is not a replacement or an equivalent to the 'perf script' way of using python with perf. The 'perf script' way is to process events and look at a given script for some python function that matches the events to pass each event for processing. This is a python module, i.e. everything is driven from the python script, that merely uses "import perf" or "from perf import". perf script is focused on tracepoints, this binding is focused on profiling as an initial target. More work is needed to make available tracepoint specific variables as event variables accessible via this binding. There is one example of such usage model, in tools/perf/python/twatch.py, a tool to watch "cycles" events together with task (fork, exit) and comm perf events. For now, due to me not being able to grok how python distutils cope with building C extensions outside the sources dir the install target just builds it, I'm using it as: [root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/ [root@emilia linux]# tools/perf/python/twatch.py cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: } cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: } cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: } cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: } cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: } cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: } cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: } cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534} cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls } cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024} The first 8 mmap events in this 8 way machine are a mistery that is still being investigated. More of the tools/perf/util/ APIs will be exposed via this python binding as the need arises. For now the focus is on creating events and processing them, symbol resolution is an obvious next step, with tracepoint variables as a close second step. Cc: Clark Williams <williams@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
return 0;
}
static void pyrf_evsel__delete(struct pyrf_evsel *pevsel)
{
evsel__exit(&pevsel->evsel);
perf tools: Add Python 3 support Added Python 3 support while keeping Python 2.7 compatibility. Committer notes: This doesn't make it to auto detect python 3, one has to explicitely ask it to build with python 3 devel files, here are the instructions provided by Jaroslav: --- $ cp -a tools/perf tools/python3-perf $ make V=1 prefix=/usr -C tools/perf PYTHON=/usr/bin/python2 all $ make V=1 prefix=/usr -C tools/python3-perf PYTHON=/usr/bin/python3 all $ make V=1 prefix=/usr -C tools/python3-perf PYTHON=/usr/bin/python3 DESTDIR=%{buildroot} install-python_ext $ make V=1 prefix=/usr -C tools/perf PYTHON=/usr/bin/python2 DESTDIR=%{buildroot} install-python_ext --- We need to make this automatic, just like the existing tests for checking if the python2 devel files are in place, allowing the build with python3 if available, fallbacking to python2 and then just disabling it if none are available. So, using the PYTHON variable to build it using O= we get: Before this patch: $ rpm -q python3 python3-devel python3-3.6.4-7.fc27.x86_64 python3-devel-3.6.4-7.fc27.x86_64 $ rm -rf /tmp/build/perf/ ; mkdir -p /tmp/build/perf ; make O=/tmp/build/perf PYTHON=/usr/bin/python3 -C tools/perf install-bin make: Entering directory '/home/acme/git/linux/tools/perf' <SNIP> Makefile.config:670: Python 3 is not yet supported; please set Makefile.config:671: PYTHON and/or PYTHON_CONFIG appropriately. Makefile.config:672: If you also have Python 2 installed, then Makefile.config:673: try something like: Makefile.config:674: Makefile.config:675: make PYTHON=python2 Makefile.config:676: Makefile.config:677: Otherwise, disable Python support entirely: Makefile.config:678: Makefile.config:679: make NO_LIBPYTHON=1 Makefile.config:680: Makefile.config:681: *** . Stop. make[1]: *** [Makefile.perf:212: sub-make] Error 2 make: *** [Makefile:110: install-bin] Error 2 make: Leaving directory '/home/acme/git/linux/tools/perf' $ After: $ make O=/tmp/build/perf PYTHON=python3 -C tools/perf install-bin $ ldd ~/bin/perf | grep python libpython3.6m.so.1.0 => /lib64/libpython3.6m.so.1.0 (0x00007f58a31e8000) $ rpm -qf /lib64/libpython3.6m.so.1.0 python3-libs-3.6.4-7.fc27.x86_64 $ Now verify that when using the binding the right ELF file is loaded, using perf trace: $ perf trace -e open* perf test python 0.051 ( 0.016 ms): perf/3927 openat(dfd: CWD, filename: /etc/ld.so.cache, flags: CLOEXEC ) = 3 <SNIP> 18: 'import perf' in python : 8.849 ( 0.013 ms): sh/3929 openat(dfd: CWD, filename: /etc/ld.so.cache, flags: CLOEXEC ) = 3 <SNIP> 25.572 ( 0.008 ms): python3/3931 openat(dfd: CWD, filename: /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so, flags: CLOEXEC) = 3 <SNIP> Ok <SNIP> $ And using tools/perf/python/twatch.py, to show PERF_RECORD_ metaevents: $ python3 tools/perf/python/twatch.py cpu: 3, pid: 16060, tid: 16060 { type: fork, pid: 5207, ppid: 16060, tid: 5207, ptid: 16060, time: 10798513015459} cpu: 3, pid: 16060, tid: 16060 { type: fork, pid: 5208, ppid: 16060, tid: 5208, ptid: 16060, time: 10798513562503} cpu: 0, pid: 5208, tid: 5208 { type: comm, pid: 5208, tid: 5208, comm: grep } cpu: 2, pid: 5207, tid: 5207 { type: comm, pid: 5207, tid: 5207, comm: ps } cpu: 2, pid: 5207, tid: 5207 { type: exit, pid: 5207, ppid: 5207, tid: 5207, ptid: 5207, time: 10798551337484} cpu: 3, pid: 5208, tid: 5208 { type: exit, pid: 5208, ppid: 5208, tid: 5208, ptid: 5208, time: 10798551292153} cpu: 3, pid: 601, tid: 601 { type: fork, pid: 5209, ppid: 601, tid: 5209, ptid: 601, time: 10801779977324} ^CTraceback (most recent call last): File "tools/perf/python/twatch.py", line 68, in <module> main() File "tools/perf/python/twatch.py", line 40, in main evlist.poll(timeout = -1) KeyboardInterrupt $ # ps ax|grep twatch 5197 pts/8 S+ 0:00 python3 tools/perf/python/twatch.py # ls -la /proc/5197/smaps -r--r--r--. 1 acme acme 0 Feb 19 13:14 /proc/5197/smaps # grep python /proc/5197/smaps 558111307000-558111309000 r-xp 00000000 fd:00 3151710 /usr/bin/python3.6 558111508000-558111509000 r--p 00001000 fd:00 3151710 /usr/bin/python3.6 558111509000-55811150a000 rw-p 00002000 fd:00 3151710 /usr/bin/python3.6 7ffad6fc1000-7ffad7008000 r-xp 00000000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so 7ffad7008000-7ffad7207000 ---p 00047000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so 7ffad7207000-7ffad7208000 r--p 00046000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so 7ffad7208000-7ffad7215000 rw-p 00047000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so 7ffadea77000-7ffaded3d000 r-xp 00000000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0 7ffaded3d000-7ffadef3c000 ---p 002c6000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0 7ffadef3c000-7ffadef42000 r--p 002c5000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0 7ffadef42000-7ffadefa5000 rw-p 002cb000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0 # And with this patch, but building normally, without specifying the PYTHON=python3 part, which will make it use python2 if its devel files are available, like in this test: $ make O=/tmp/build/perf -C tools/perf install-bin $ ldd ~/bin/perf | grep python libpython2.7.so.1.0 => /lib64/libpython2.7.so.1.0 (0x00007f6a44410000) $ ldd /tmp/build/perf/python_ext_build/lib/perf.so | grep python libpython2.7.so.1.0 => /lib64/libpython2.7.so.1.0 (0x00007fed28a2c000) $ [acme@jouet perf]$ tools/perf/python/twatch.py cpu: 0, pid: 2817, tid: 2817 { type: fork, pid: 2817, ppid: 2817, tid: 8910, ptid: 2817, time: 11126454335306} cpu: 0, pid: 2817, tid: 2817 { type: comm, pid: 2817, tid: 8910, comm: worker } $ ps ax | grep twatch.py 8909 pts/8 S+ 0:00 /usr/bin/python tools/perf/python/twatch.py $ grep python /proc/8909/smaps 5579de658000-5579de659000 r-xp 00000000 fd:00 3156044 /usr/bin/python2.7 5579de858000-5579de859000 r--p 00000000 fd:00 3156044 /usr/bin/python2.7 5579de859000-5579de85a000 rw-p 00001000 fd:00 3156044 /usr/bin/python2.7 7f0de01f7000-7f0de023e000 r-xp 00000000 00:2d 230695 /tmp/build/perf/python/perf.so 7f0de023e000-7f0de043d000 ---p 00047000 00:2d 230695 /tmp/build/perf/python/perf.so 7f0de043d000-7f0de043e000 r--p 00046000 00:2d 230695 /tmp/build/perf/python/perf.so 7f0de043e000-7f0de044b000 rw-p 00047000 00:2d 230695 /tmp/build/perf/python/perf.so 7f0de6f0f000-7f0de6f13000 r-xp 00000000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so 7f0de6f13000-7f0de7113000 ---p 00004000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so 7f0de7113000-7f0de7114000 r--p 00004000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so 7f0de7114000-7f0de7115000 rw-p 00005000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so 7f0de7e73000-7f0de8052000 r-xp 00000000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0 7f0de8052000-7f0de8251000 ---p 001df000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0 7f0de8251000-7f0de8255000 r--p 001de000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0 7f0de8255000-7f0de8291000 rw-p 001e2000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0 $ Signed-off-by: Jaroslav Škarvada <jskarvad@redhat.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> LPU-Reference: 20180119205641.24242-1-jskarvad@redhat.com Link: https://lkml.kernel.org/n/tip-8d7dt9kqp83vsz25hagug8fu@git.kernel.org [ Removed explicit check for python version, allowing it to really build with python3 ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-01-19 21:56:41 +01:00
Py_TYPE(pevsel)->tp_free((PyObject*)pevsel);
perf tools: Initial python binding First clarifying that this kind of binding is not a replacement or an equivalent to the 'perf script' way of using python with perf. The 'perf script' way is to process events and look at a given script for some python function that matches the events to pass each event for processing. This is a python module, i.e. everything is driven from the python script, that merely uses "import perf" or "from perf import". perf script is focused on tracepoints, this binding is focused on profiling as an initial target. More work is needed to make available tracepoint specific variables as event variables accessible via this binding. There is one example of such usage model, in tools/perf/python/twatch.py, a tool to watch "cycles" events together with task (fork, exit) and comm perf events. For now, due to me not being able to grok how python distutils cope with building C extensions outside the sources dir the install target just builds it, I'm using it as: [root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/ [root@emilia linux]# tools/perf/python/twatch.py cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: } cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: } cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: } cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: } cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: } cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: } cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: } cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534} cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls } cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024} The first 8 mmap events in this 8 way machine are a mistery that is still being investigated. More of the tools/perf/util/ APIs will be exposed via this python binding as the need arises. For now the focus is on creating events and processing them, symbol resolution is an obvious next step, with tracepoint variables as a close second step. Cc: Clark Williams <williams@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
}
static PyObject *pyrf_evsel__open(struct pyrf_evsel *pevsel,
PyObject *args, PyObject *kwargs)
{
struct evsel *evsel = &pevsel->evsel;
struct perf_cpu_map *cpus = NULL;
struct perf_thread_map *threads = NULL;
perf tools: Initial python binding First clarifying that this kind of binding is not a replacement or an equivalent to the 'perf script' way of using python with perf. The 'perf script' way is to process events and look at a given script for some python function that matches the events to pass each event for processing. This is a python module, i.e. everything is driven from the python script, that merely uses "import perf" or "from perf import". perf script is focused on tracepoints, this binding is focused on profiling as an initial target. More work is needed to make available tracepoint specific variables as event variables accessible via this binding. There is one example of such usage model, in tools/perf/python/twatch.py, a tool to watch "cycles" events together with task (fork, exit) and comm perf events. For now, due to me not being able to grok how python distutils cope with building C extensions outside the sources dir the install target just builds it, I'm using it as: [root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/ [root@emilia linux]# tools/perf/python/twatch.py cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: } cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: } cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: } cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: } cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: } cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: } cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: } cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534} cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls } cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024} The first 8 mmap events in this 8 way machine are a mistery that is still being investigated. More of the tools/perf/util/ APIs will be exposed via this python binding as the need arises. For now the focus is on creating events and processing them, symbol resolution is an obvious next step, with tracepoint variables as a close second step. Cc: Clark Williams <williams@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
PyObject *pcpus = NULL, *pthreads = NULL;
int group = 0, inherit = 0;
static char *kwlist[] = { "cpus", "threads", "group", "inherit", NULL };
perf tools: Initial python binding First clarifying that this kind of binding is not a replacement or an equivalent to the 'perf script' way of using python with perf. The 'perf script' way is to process events and look at a given script for some python function that matches the events to pass each event for processing. This is a python module, i.e. everything is driven from the python script, that merely uses "import perf" or "from perf import". perf script is focused on tracepoints, this binding is focused on profiling as an initial target. More work is needed to make available tracepoint specific variables as event variables accessible via this binding. There is one example of such usage model, in tools/perf/python/twatch.py, a tool to watch "cycles" events together with task (fork, exit) and comm perf events. For now, due to me not being able to grok how python distutils cope with building C extensions outside the sources dir the install target just builds it, I'm using it as: [root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/ [root@emilia linux]# tools/perf/python/twatch.py cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: } cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: } cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: } cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: } cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: } cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: } cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: } cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534} cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls } cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024} The first 8 mmap events in this 8 way machine are a mistery that is still being investigated. More of the tools/perf/util/ APIs will be exposed via this python binding as the need arises. For now the focus is on creating events and processing them, symbol resolution is an obvious next step, with tracepoint variables as a close second step. Cc: Clark Williams <williams@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
if (!PyArg_ParseTupleAndKeywords(args, kwargs, "|OOii", kwlist,
&pcpus, &pthreads, &group, &inherit))
perf tools: Initial python binding First clarifying that this kind of binding is not a replacement or an equivalent to the 'perf script' way of using python with perf. The 'perf script' way is to process events and look at a given script for some python function that matches the events to pass each event for processing. This is a python module, i.e. everything is driven from the python script, that merely uses "import perf" or "from perf import". perf script is focused on tracepoints, this binding is focused on profiling as an initial target. More work is needed to make available tracepoint specific variables as event variables accessible via this binding. There is one example of such usage model, in tools/perf/python/twatch.py, a tool to watch "cycles" events together with task (fork, exit) and comm perf events. For now, due to me not being able to grok how python distutils cope with building C extensions outside the sources dir the install target just builds it, I'm using it as: [root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/ [root@emilia linux]# tools/perf/python/twatch.py cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: } cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: } cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: } cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: } cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: } cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: } cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: } cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534} cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls } cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024} The first 8 mmap events in this 8 way machine are a mistery that is still being investigated. More of the tools/perf/util/ APIs will be exposed via this python binding as the need arises. For now the focus is on creating events and processing them, symbol resolution is an obvious next step, with tracepoint variables as a close second step. Cc: Clark Williams <williams@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
return NULL;
if (pthreads != NULL)
threads = ((struct pyrf_thread_map *)pthreads)->threads;
if (pcpus != NULL)
cpus = ((struct pyrf_cpu_map *)pcpus)->cpus;
libperf: Move perf_event_attr field from perf's evsel to libperf's perf_evsel Move the perf_event_attr struct fron 'struct evsel' to 'struct perf_evsel'. Committer notes: Fixed up these: tools/perf/arch/arm/util/auxtrace.c tools/perf/arch/arm/util/cs-etm.c tools/perf/arch/arm64/util/arm-spe.c tools/perf/arch/s390/util/auxtrace.c tools/perf/util/cs-etm.c Also cc1: warnings being treated as errors tests/sample-parsing.c: In function 'do_test': tests/sample-parsing.c:162: error: missing initializer tests/sample-parsing.c:162: error: (near initialization for 'evsel.core.cpus') struct evsel evsel = { .needs_swap = false, - .core.attr = { - .sample_type = sample_type, - .read_format = read_format, + .core = { + . attr = { + .sample_type = sample_type, + .read_format = read_format, + }, [perfbuilder@a70e4eeb5549 /]$ gcc --version |& head -1 gcc (GCC) 4.4.7 Also we don't need to include perf_event.h in tools/perf/lib/include/perf/evsel.h, forward declaring 'struct perf_event_attr' is enough. And this even fixes the build in some systems where things are used somewhere down the include path from perf_event.h without defining __always_inline. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20190721112506.12306-43-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-07-21 13:24:29 +02:00
evsel->core.attr.inherit = inherit;
/*
* This will group just the fds for this single evsel, to group
* multiple events, use evlist.open().
*/
if (evsel__open(evsel, cpus, threads) < 0) {
perf tools: Initial python binding First clarifying that this kind of binding is not a replacement or an equivalent to the 'perf script' way of using python with perf. The 'perf script' way is to process events and look at a given script for some python function that matches the events to pass each event for processing. This is a python module, i.e. everything is driven from the python script, that merely uses "import perf" or "from perf import". perf script is focused on tracepoints, this binding is focused on profiling as an initial target. More work is needed to make available tracepoint specific variables as event variables accessible via this binding. There is one example of such usage model, in tools/perf/python/twatch.py, a tool to watch "cycles" events together with task (fork, exit) and comm perf events. For now, due to me not being able to grok how python distutils cope with building C extensions outside the sources dir the install target just builds it, I'm using it as: [root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/ [root@emilia linux]# tools/perf/python/twatch.py cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: } cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: } cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: } cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: } cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: } cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: } cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: } cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534} cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls } cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024} The first 8 mmap events in this 8 way machine are a mistery that is still being investigated. More of the tools/perf/util/ APIs will be exposed via this python binding as the need arises. For now the focus is on creating events and processing them, symbol resolution is an obvious next step, with tracepoint variables as a close second step. Cc: Clark Williams <williams@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
PyErr_SetFromErrno(PyExc_OSError);
return NULL;
}
Py_INCREF(Py_None);
return Py_None;
}
static PyMethodDef pyrf_evsel__methods[] = {
{
.ml_name = "open",
.ml_meth = (PyCFunction)pyrf_evsel__open,
.ml_flags = METH_VARARGS | METH_KEYWORDS,
.ml_doc = PyDoc_STR("open the event selector file descriptor table.")
},
{ .ml_name = NULL, }
perf tools: Initial python binding First clarifying that this kind of binding is not a replacement or an equivalent to the 'perf script' way of using python with perf. The 'perf script' way is to process events and look at a given script for some python function that matches the events to pass each event for processing. This is a python module, i.e. everything is driven from the python script, that merely uses "import perf" or "from perf import". perf script is focused on tracepoints, this binding is focused on profiling as an initial target. More work is needed to make available tracepoint specific variables as event variables accessible via this binding. There is one example of such usage model, in tools/perf/python/twatch.py, a tool to watch "cycles" events together with task (fork, exit) and comm perf events. For now, due to me not being able to grok how python distutils cope with building C extensions outside the sources dir the install target just builds it, I'm using it as: [root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/ [root@emilia linux]# tools/perf/python/twatch.py cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: } cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: } cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: } cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: } cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: } cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: } cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: } cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534} cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls } cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024} The first 8 mmap events in this 8 way machine are a mistery that is still being investigated. More of the tools/perf/util/ APIs will be exposed via this python binding as the need arises. For now the focus is on creating events and processing them, symbol resolution is an obvious next step, with tracepoint variables as a close second step. Cc: Clark Williams <williams@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
};
static char pyrf_evsel__doc[] = PyDoc_STR("perf event selector list object.");
static PyTypeObject pyrf_evsel__type = {
PyVarObject_HEAD_INIT(NULL, 0)
.tp_name = "perf.evsel",
.tp_basicsize = sizeof(struct pyrf_evsel),
.tp_dealloc = (destructor)pyrf_evsel__delete,
.tp_flags = Py_TPFLAGS_DEFAULT|Py_TPFLAGS_BASETYPE,
.tp_doc = pyrf_evsel__doc,
.tp_methods = pyrf_evsel__methods,
.tp_init = (initproc)pyrf_evsel__init,
};
static int pyrf_evsel__setup_types(void)
{
pyrf_evsel__type.tp_new = PyType_GenericNew;
return PyType_Ready(&pyrf_evsel__type);
}
struct pyrf_evlist {
PyObject_HEAD
struct evlist evlist;
perf tools: Initial python binding First clarifying that this kind of binding is not a replacement or an equivalent to the 'perf script' way of using python with perf. The 'perf script' way is to process events and look at a given script for some python function that matches the events to pass each event for processing. This is a python module, i.e. everything is driven from the python script, that merely uses "import perf" or "from perf import". perf script is focused on tracepoints, this binding is focused on profiling as an initial target. More work is needed to make available tracepoint specific variables as event variables accessible via this binding. There is one example of such usage model, in tools/perf/python/twatch.py, a tool to watch "cycles" events together with task (fork, exit) and comm perf events. For now, due to me not being able to grok how python distutils cope with building C extensions outside the sources dir the install target just builds it, I'm using it as: [root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/ [root@emilia linux]# tools/perf/python/twatch.py cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: } cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: } cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: } cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: } cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: } cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: } cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: } cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534} cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls } cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024} The first 8 mmap events in this 8 way machine are a mistery that is still being investigated. More of the tools/perf/util/ APIs will be exposed via this python binding as the need arises. For now the focus is on creating events and processing them, symbol resolution is an obvious next step, with tracepoint variables as a close second step. Cc: Clark Williams <williams@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
};
static int pyrf_evlist__init(struct pyrf_evlist *pevlist,
perf tools: Use __maybe_used for unused variables perf defines both __used and __unused variables to use for marking unused variables. The variable __used is defined to __attribute__((__unused__)), which contradicts the kernel definition to __attribute__((__used__)) for new gcc versions. On Android, __used is also defined in system headers and this leads to warnings like: warning: '__used__' attribute ignored __unused is not defined in the kernel and is not a standard definition. If __unused is included everywhere instead of __used, this leads to conflicts with glibc headers, since glibc has a variables with this name in its headers. The best approach is to use __maybe_unused, the definition used in the kernel for __attribute__((unused)). In this way there is only one definition in perf sources (instead of 2 definitions that point to the same thing: __used and __unused) and it works on both Linux and Android. This patch simply replaces all instances of __used and __unused with __maybe_unused. Signed-off-by: Irina Tirdea <irina.tirdea@intel.com> Acked-by: Pekka Enberg <penberg@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/1347315303-29906-7-git-send-email-irina.tirdea@intel.com [ committer note: fixed up conflict with a116e05 in builtin-sched.c ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-11 01:15:03 +03:00
PyObject *args, PyObject *kwargs __maybe_unused)
perf tools: Initial python binding First clarifying that this kind of binding is not a replacement or an equivalent to the 'perf script' way of using python with perf. The 'perf script' way is to process events and look at a given script for some python function that matches the events to pass each event for processing. This is a python module, i.e. everything is driven from the python script, that merely uses "import perf" or "from perf import". perf script is focused on tracepoints, this binding is focused on profiling as an initial target. More work is needed to make available tracepoint specific variables as event variables accessible via this binding. There is one example of such usage model, in tools/perf/python/twatch.py, a tool to watch "cycles" events together with task (fork, exit) and comm perf events. For now, due to me not being able to grok how python distutils cope with building C extensions outside the sources dir the install target just builds it, I'm using it as: [root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/ [root@emilia linux]# tools/perf/python/twatch.py cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: } cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: } cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: } cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: } cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: } cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: } cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: } cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534} cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls } cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024} The first 8 mmap events in this 8 way machine are a mistery that is still being investigated. More of the tools/perf/util/ APIs will be exposed via this python binding as the need arises. For now the focus is on creating events and processing them, symbol resolution is an obvious next step, with tracepoint variables as a close second step. Cc: Clark Williams <williams@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
{
PyObject *pcpus = NULL, *pthreads = NULL;
struct perf_cpu_map *cpus;
struct perf_thread_map *threads;
if (!PyArg_ParseTuple(args, "OO", &pcpus, &pthreads))
return -1;
threads = ((struct pyrf_thread_map *)pthreads)->threads;
cpus = ((struct pyrf_cpu_map *)pcpus)->cpus;
evlist__init(&pevlist->evlist, cpus, threads);
perf tools: Initial python binding First clarifying that this kind of binding is not a replacement or an equivalent to the 'perf script' way of using python with perf. The 'perf script' way is to process events and look at a given script for some python function that matches the events to pass each event for processing. This is a python module, i.e. everything is driven from the python script, that merely uses "import perf" or "from perf import". perf script is focused on tracepoints, this binding is focused on profiling as an initial target. More work is needed to make available tracepoint specific variables as event variables accessible via this binding. There is one example of such usage model, in tools/perf/python/twatch.py, a tool to watch "cycles" events together with task (fork, exit) and comm perf events. For now, due to me not being able to grok how python distutils cope with building C extensions outside the sources dir the install target just builds it, I'm using it as: [root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/ [root@emilia linux]# tools/perf/python/twatch.py cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: } cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: } cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: } cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: } cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: } cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: } cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: } cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534} cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls } cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024} The first 8 mmap events in this 8 way machine are a mistery that is still being investigated. More of the tools/perf/util/ APIs will be exposed via this python binding as the need arises. For now the focus is on creating events and processing them, symbol resolution is an obvious next step, with tracepoint variables as a close second step. Cc: Clark Williams <williams@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
return 0;
}
static void pyrf_evlist__delete(struct pyrf_evlist *pevlist)
{
evlist__exit(&pevlist->evlist);
perf tools: Add Python 3 support Added Python 3 support while keeping Python 2.7 compatibility. Committer notes: This doesn't make it to auto detect python 3, one has to explicitely ask it to build with python 3 devel files, here are the instructions provided by Jaroslav: --- $ cp -a tools/perf tools/python3-perf $ make V=1 prefix=/usr -C tools/perf PYTHON=/usr/bin/python2 all $ make V=1 prefix=/usr -C tools/python3-perf PYTHON=/usr/bin/python3 all $ make V=1 prefix=/usr -C tools/python3-perf PYTHON=/usr/bin/python3 DESTDIR=%{buildroot} install-python_ext $ make V=1 prefix=/usr -C tools/perf PYTHON=/usr/bin/python2 DESTDIR=%{buildroot} install-python_ext --- We need to make this automatic, just like the existing tests for checking if the python2 devel files are in place, allowing the build with python3 if available, fallbacking to python2 and then just disabling it if none are available. So, using the PYTHON variable to build it using O= we get: Before this patch: $ rpm -q python3 python3-devel python3-3.6.4-7.fc27.x86_64 python3-devel-3.6.4-7.fc27.x86_64 $ rm -rf /tmp/build/perf/ ; mkdir -p /tmp/build/perf ; make O=/tmp/build/perf PYTHON=/usr/bin/python3 -C tools/perf install-bin make: Entering directory '/home/acme/git/linux/tools/perf' <SNIP> Makefile.config:670: Python 3 is not yet supported; please set Makefile.config:671: PYTHON and/or PYTHON_CONFIG appropriately. Makefile.config:672: If you also have Python 2 installed, then Makefile.config:673: try something like: Makefile.config:674: Makefile.config:675: make PYTHON=python2 Makefile.config:676: Makefile.config:677: Otherwise, disable Python support entirely: Makefile.config:678: Makefile.config:679: make NO_LIBPYTHON=1 Makefile.config:680: Makefile.config:681: *** . Stop. make[1]: *** [Makefile.perf:212: sub-make] Error 2 make: *** [Makefile:110: install-bin] Error 2 make: Leaving directory '/home/acme/git/linux/tools/perf' $ After: $ make O=/tmp/build/perf PYTHON=python3 -C tools/perf install-bin $ ldd ~/bin/perf | grep python libpython3.6m.so.1.0 => /lib64/libpython3.6m.so.1.0 (0x00007f58a31e8000) $ rpm -qf /lib64/libpython3.6m.so.1.0 python3-libs-3.6.4-7.fc27.x86_64 $ Now verify that when using the binding the right ELF file is loaded, using perf trace: $ perf trace -e open* perf test python 0.051 ( 0.016 ms): perf/3927 openat(dfd: CWD, filename: /etc/ld.so.cache, flags: CLOEXEC ) = 3 <SNIP> 18: 'import perf' in python : 8.849 ( 0.013 ms): sh/3929 openat(dfd: CWD, filename: /etc/ld.so.cache, flags: CLOEXEC ) = 3 <SNIP> 25.572 ( 0.008 ms): python3/3931 openat(dfd: CWD, filename: /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so, flags: CLOEXEC) = 3 <SNIP> Ok <SNIP> $ And using tools/perf/python/twatch.py, to show PERF_RECORD_ metaevents: $ python3 tools/perf/python/twatch.py cpu: 3, pid: 16060, tid: 16060 { type: fork, pid: 5207, ppid: 16060, tid: 5207, ptid: 16060, time: 10798513015459} cpu: 3, pid: 16060, tid: 16060 { type: fork, pid: 5208, ppid: 16060, tid: 5208, ptid: 16060, time: 10798513562503} cpu: 0, pid: 5208, tid: 5208 { type: comm, pid: 5208, tid: 5208, comm: grep } cpu: 2, pid: 5207, tid: 5207 { type: comm, pid: 5207, tid: 5207, comm: ps } cpu: 2, pid: 5207, tid: 5207 { type: exit, pid: 5207, ppid: 5207, tid: 5207, ptid: 5207, time: 10798551337484} cpu: 3, pid: 5208, tid: 5208 { type: exit, pid: 5208, ppid: 5208, tid: 5208, ptid: 5208, time: 10798551292153} cpu: 3, pid: 601, tid: 601 { type: fork, pid: 5209, ppid: 601, tid: 5209, ptid: 601, time: 10801779977324} ^CTraceback (most recent call last): File "tools/perf/python/twatch.py", line 68, in <module> main() File "tools/perf/python/twatch.py", line 40, in main evlist.poll(timeout = -1) KeyboardInterrupt $ # ps ax|grep twatch 5197 pts/8 S+ 0:00 python3 tools/perf/python/twatch.py # ls -la /proc/5197/smaps -r--r--r--. 1 acme acme 0 Feb 19 13:14 /proc/5197/smaps # grep python /proc/5197/smaps 558111307000-558111309000 r-xp 00000000 fd:00 3151710 /usr/bin/python3.6 558111508000-558111509000 r--p 00001000 fd:00 3151710 /usr/bin/python3.6 558111509000-55811150a000 rw-p 00002000 fd:00 3151710 /usr/bin/python3.6 7ffad6fc1000-7ffad7008000 r-xp 00000000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so 7ffad7008000-7ffad7207000 ---p 00047000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so 7ffad7207000-7ffad7208000 r--p 00046000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so 7ffad7208000-7ffad7215000 rw-p 00047000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so 7ffadea77000-7ffaded3d000 r-xp 00000000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0 7ffaded3d000-7ffadef3c000 ---p 002c6000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0 7ffadef3c000-7ffadef42000 r--p 002c5000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0 7ffadef42000-7ffadefa5000 rw-p 002cb000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0 # And with this patch, but building normally, without specifying the PYTHON=python3 part, which will make it use python2 if its devel files are available, like in this test: $ make O=/tmp/build/perf -C tools/perf install-bin $ ldd ~/bin/perf | grep python libpython2.7.so.1.0 => /lib64/libpython2.7.so.1.0 (0x00007f6a44410000) $ ldd /tmp/build/perf/python_ext_build/lib/perf.so | grep python libpython2.7.so.1.0 => /lib64/libpython2.7.so.1.0 (0x00007fed28a2c000) $ [acme@jouet perf]$ tools/perf/python/twatch.py cpu: 0, pid: 2817, tid: 2817 { type: fork, pid: 2817, ppid: 2817, tid: 8910, ptid: 2817, time: 11126454335306} cpu: 0, pid: 2817, tid: 2817 { type: comm, pid: 2817, tid: 8910, comm: worker } $ ps ax | grep twatch.py 8909 pts/8 S+ 0:00 /usr/bin/python tools/perf/python/twatch.py $ grep python /proc/8909/smaps 5579de658000-5579de659000 r-xp 00000000 fd:00 3156044 /usr/bin/python2.7 5579de858000-5579de859000 r--p 00000000 fd:00 3156044 /usr/bin/python2.7 5579de859000-5579de85a000 rw-p 00001000 fd:00 3156044 /usr/bin/python2.7 7f0de01f7000-7f0de023e000 r-xp 00000000 00:2d 230695 /tmp/build/perf/python/perf.so 7f0de023e000-7f0de043d000 ---p 00047000 00:2d 230695 /tmp/build/perf/python/perf.so 7f0de043d000-7f0de043e000 r--p 00046000 00:2d 230695 /tmp/build/perf/python/perf.so 7f0de043e000-7f0de044b000 rw-p 00047000 00:2d 230695 /tmp/build/perf/python/perf.so 7f0de6f0f000-7f0de6f13000 r-xp 00000000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so 7f0de6f13000-7f0de7113000 ---p 00004000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so 7f0de7113000-7f0de7114000 r--p 00004000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so 7f0de7114000-7f0de7115000 rw-p 00005000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so 7f0de7e73000-7f0de8052000 r-xp 00000000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0 7f0de8052000-7f0de8251000 ---p 001df000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0 7f0de8251000-7f0de8255000 r--p 001de000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0 7f0de8255000-7f0de8291000 rw-p 001e2000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0 $ Signed-off-by: Jaroslav Škarvada <jskarvad@redhat.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> LPU-Reference: 20180119205641.24242-1-jskarvad@redhat.com Link: https://lkml.kernel.org/n/tip-8d7dt9kqp83vsz25hagug8fu@git.kernel.org [ Removed explicit check for python version, allowing it to really build with python3 ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-01-19 21:56:41 +01:00
Py_TYPE(pevlist)->tp_free((PyObject*)pevlist);
perf tools: Initial python binding First clarifying that this kind of binding is not a replacement or an equivalent to the 'perf script' way of using python with perf. The 'perf script' way is to process events and look at a given script for some python function that matches the events to pass each event for processing. This is a python module, i.e. everything is driven from the python script, that merely uses "import perf" or "from perf import". perf script is focused on tracepoints, this binding is focused on profiling as an initial target. More work is needed to make available tracepoint specific variables as event variables accessible via this binding. There is one example of such usage model, in tools/perf/python/twatch.py, a tool to watch "cycles" events together with task (fork, exit) and comm perf events. For now, due to me not being able to grok how python distutils cope with building C extensions outside the sources dir the install target just builds it, I'm using it as: [root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/ [root@emilia linux]# tools/perf/python/twatch.py cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: } cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: } cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: } cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: } cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: } cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: } cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: } cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534} cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls } cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024} The first 8 mmap events in this 8 way machine are a mistery that is still being investigated. More of the tools/perf/util/ APIs will be exposed via this python binding as the need arises. For now the focus is on creating events and processing them, symbol resolution is an obvious next step, with tracepoint variables as a close second step. Cc: Clark Williams <williams@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
}
static PyObject *pyrf_evlist__mmap(struct pyrf_evlist *pevlist,
PyObject *args, PyObject *kwargs)
{
struct evlist *evlist = &pevlist->evlist;
static char *kwlist[] = { "pages", "overwrite", NULL };
perf tools: Initial python binding First clarifying that this kind of binding is not a replacement or an equivalent to the 'perf script' way of using python with perf. The 'perf script' way is to process events and look at a given script for some python function that matches the events to pass each event for processing. This is a python module, i.e. everything is driven from the python script, that merely uses "import perf" or "from perf import". perf script is focused on tracepoints, this binding is focused on profiling as an initial target. More work is needed to make available tracepoint specific variables as event variables accessible via this binding. There is one example of such usage model, in tools/perf/python/twatch.py, a tool to watch "cycles" events together with task (fork, exit) and comm perf events. For now, due to me not being able to grok how python distutils cope with building C extensions outside the sources dir the install target just builds it, I'm using it as: [root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/ [root@emilia linux]# tools/perf/python/twatch.py cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: } cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: } cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: } cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: } cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: } cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: } cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: } cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534} cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls } cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024} The first 8 mmap events in this 8 way machine are a mistery that is still being investigated. More of the tools/perf/util/ APIs will be exposed via this python binding as the need arises. For now the focus is on creating events and processing them, symbol resolution is an obvious next step, with tracepoint variables as a close second step. Cc: Clark Williams <williams@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
int pages = 128, overwrite = false;
if (!PyArg_ParseTupleAndKeywords(args, kwargs, "|ii", kwlist,
&pages, &overwrite))
perf tools: Initial python binding First clarifying that this kind of binding is not a replacement or an equivalent to the 'perf script' way of using python with perf. The 'perf script' way is to process events and look at a given script for some python function that matches the events to pass each event for processing. This is a python module, i.e. everything is driven from the python script, that merely uses "import perf" or "from perf import". perf script is focused on tracepoints, this binding is focused on profiling as an initial target. More work is needed to make available tracepoint specific variables as event variables accessible via this binding. There is one example of such usage model, in tools/perf/python/twatch.py, a tool to watch "cycles" events together with task (fork, exit) and comm perf events. For now, due to me not being able to grok how python distutils cope with building C extensions outside the sources dir the install target just builds it, I'm using it as: [root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/ [root@emilia linux]# tools/perf/python/twatch.py cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: } cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: } cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: } cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: } cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: } cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: } cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: } cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534} cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls } cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024} The first 8 mmap events in this 8 way machine are a mistery that is still being investigated. More of the tools/perf/util/ APIs will be exposed via this python binding as the need arises. For now the focus is on creating events and processing them, symbol resolution is an obvious next step, with tracepoint variables as a close second step. Cc: Clark Williams <williams@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
return NULL;
if (evlist__mmap(evlist, pages) < 0) {
perf tools: Initial python binding First clarifying that this kind of binding is not a replacement or an equivalent to the 'perf script' way of using python with perf. The 'perf script' way is to process events and look at a given script for some python function that matches the events to pass each event for processing. This is a python module, i.e. everything is driven from the python script, that merely uses "import perf" or "from perf import". perf script is focused on tracepoints, this binding is focused on profiling as an initial target. More work is needed to make available tracepoint specific variables as event variables accessible via this binding. There is one example of such usage model, in tools/perf/python/twatch.py, a tool to watch "cycles" events together with task (fork, exit) and comm perf events. For now, due to me not being able to grok how python distutils cope with building C extensions outside the sources dir the install target just builds it, I'm using it as: [root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/ [root@emilia linux]# tools/perf/python/twatch.py cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: } cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: } cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: } cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: } cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: } cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: } cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: } cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534} cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls } cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024} The first 8 mmap events in this 8 way machine are a mistery that is still being investigated. More of the tools/perf/util/ APIs will be exposed via this python binding as the need arises. For now the focus is on creating events and processing them, symbol resolution is an obvious next step, with tracepoint variables as a close second step. Cc: Clark Williams <williams@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
PyErr_SetFromErrno(PyExc_OSError);
return NULL;
}
Py_INCREF(Py_None);
return Py_None;
}
static PyObject *pyrf_evlist__poll(struct pyrf_evlist *pevlist,
PyObject *args, PyObject *kwargs)
{
struct evlist *evlist = &pevlist->evlist;
static char *kwlist[] = { "timeout", NULL };
perf tools: Initial python binding First clarifying that this kind of binding is not a replacement or an equivalent to the 'perf script' way of using python with perf. The 'perf script' way is to process events and look at a given script for some python function that matches the events to pass each event for processing. This is a python module, i.e. everything is driven from the python script, that merely uses "import perf" or "from perf import". perf script is focused on tracepoints, this binding is focused on profiling as an initial target. More work is needed to make available tracepoint specific variables as event variables accessible via this binding. There is one example of such usage model, in tools/perf/python/twatch.py, a tool to watch "cycles" events together with task (fork, exit) and comm perf events. For now, due to me not being able to grok how python distutils cope with building C extensions outside the sources dir the install target just builds it, I'm using it as: [root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/ [root@emilia linux]# tools/perf/python/twatch.py cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: } cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: } cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: } cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: } cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: } cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: } cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: } cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534} cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls } cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024} The first 8 mmap events in this 8 way machine are a mistery that is still being investigated. More of the tools/perf/util/ APIs will be exposed via this python binding as the need arises. For now the focus is on creating events and processing them, symbol resolution is an obvious next step, with tracepoint variables as a close second step. Cc: Clark Williams <williams@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
int timeout = -1, n;
if (!PyArg_ParseTupleAndKeywords(args, kwargs, "|i", kwlist, &timeout))
return NULL;
n = evlist__poll(evlist, timeout);
perf tools: Initial python binding First clarifying that this kind of binding is not a replacement or an equivalent to the 'perf script' way of using python with perf. The 'perf script' way is to process events and look at a given script for some python function that matches the events to pass each event for processing. This is a python module, i.e. everything is driven from the python script, that merely uses "import perf" or "from perf import". perf script is focused on tracepoints, this binding is focused on profiling as an initial target. More work is needed to make available tracepoint specific variables as event variables accessible via this binding. There is one example of such usage model, in tools/perf/python/twatch.py, a tool to watch "cycles" events together with task (fork, exit) and comm perf events. For now, due to me not being able to grok how python distutils cope with building C extensions outside the sources dir the install target just builds it, I'm using it as: [root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/ [root@emilia linux]# tools/perf/python/twatch.py cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: } cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: } cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: } cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: } cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: } cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: } cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: } cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534} cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls } cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024} The first 8 mmap events in this 8 way machine are a mistery that is still being investigated. More of the tools/perf/util/ APIs will be exposed via this python binding as the need arises. For now the focus is on creating events and processing them, symbol resolution is an obvious next step, with tracepoint variables as a close second step. Cc: Clark Williams <williams@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
if (n < 0) {
PyErr_SetFromErrno(PyExc_OSError);
return NULL;
}
return Py_BuildValue("i", n);
}
static PyObject *pyrf_evlist__get_pollfd(struct pyrf_evlist *pevlist,
perf tools: Use __maybe_used for unused variables perf defines both __used and __unused variables to use for marking unused variables. The variable __used is defined to __attribute__((__unused__)), which contradicts the kernel definition to __attribute__((__used__)) for new gcc versions. On Android, __used is also defined in system headers and this leads to warnings like: warning: '__used__' attribute ignored __unused is not defined in the kernel and is not a standard definition. If __unused is included everywhere instead of __used, this leads to conflicts with glibc headers, since glibc has a variables with this name in its headers. The best approach is to use __maybe_unused, the definition used in the kernel for __attribute__((unused)). In this way there is only one definition in perf sources (instead of 2 definitions that point to the same thing: __used and __unused) and it works on both Linux and Android. This patch simply replaces all instances of __used and __unused with __maybe_unused. Signed-off-by: Irina Tirdea <irina.tirdea@intel.com> Acked-by: Pekka Enberg <penberg@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/1347315303-29906-7-git-send-email-irina.tirdea@intel.com [ committer note: fixed up conflict with a116e05 in builtin-sched.c ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-11 01:15:03 +03:00
PyObject *args __maybe_unused,
PyObject *kwargs __maybe_unused)
perf tools: Initial python binding First clarifying that this kind of binding is not a replacement or an equivalent to the 'perf script' way of using python with perf. The 'perf script' way is to process events and look at a given script for some python function that matches the events to pass each event for processing. This is a python module, i.e. everything is driven from the python script, that merely uses "import perf" or "from perf import". perf script is focused on tracepoints, this binding is focused on profiling as an initial target. More work is needed to make available tracepoint specific variables as event variables accessible via this binding. There is one example of such usage model, in tools/perf/python/twatch.py, a tool to watch "cycles" events together with task (fork, exit) and comm perf events. For now, due to me not being able to grok how python distutils cope with building C extensions outside the sources dir the install target just builds it, I'm using it as: [root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/ [root@emilia linux]# tools/perf/python/twatch.py cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: } cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: } cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: } cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: } cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: } cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: } cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: } cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534} cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls } cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024} The first 8 mmap events in this 8 way machine are a mistery that is still being investigated. More of the tools/perf/util/ APIs will be exposed via this python binding as the need arises. For now the focus is on creating events and processing them, symbol resolution is an obvious next step, with tracepoint variables as a close second step. Cc: Clark Williams <williams@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
{
struct evlist *evlist = &pevlist->evlist;
perf tools: Initial python binding First clarifying that this kind of binding is not a replacement or an equivalent to the 'perf script' way of using python with perf. The 'perf script' way is to process events and look at a given script for some python function that matches the events to pass each event for processing. This is a python module, i.e. everything is driven from the python script, that merely uses "import perf" or "from perf import". perf script is focused on tracepoints, this binding is focused on profiling as an initial target. More work is needed to make available tracepoint specific variables as event variables accessible via this binding. There is one example of such usage model, in tools/perf/python/twatch.py, a tool to watch "cycles" events together with task (fork, exit) and comm perf events. For now, due to me not being able to grok how python distutils cope with building C extensions outside the sources dir the install target just builds it, I'm using it as: [root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/ [root@emilia linux]# tools/perf/python/twatch.py cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: } cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: } cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: } cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: } cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: } cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: } cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: } cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534} cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls } cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024} The first 8 mmap events in this 8 way machine are a mistery that is still being investigated. More of the tools/perf/util/ APIs will be exposed via this python binding as the need arises. For now the focus is on creating events and processing them, symbol resolution is an obvious next step, with tracepoint variables as a close second step. Cc: Clark Williams <williams@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
PyObject *list = PyList_New(0);
int i;
for (i = 0; i < evlist->core.pollfd.nr; ++i) {
perf tools: Initial python binding First clarifying that this kind of binding is not a replacement or an equivalent to the 'perf script' way of using python with perf. The 'perf script' way is to process events and look at a given script for some python function that matches the events to pass each event for processing. This is a python module, i.e. everything is driven from the python script, that merely uses "import perf" or "from perf import". perf script is focused on tracepoints, this binding is focused on profiling as an initial target. More work is needed to make available tracepoint specific variables as event variables accessible via this binding. There is one example of such usage model, in tools/perf/python/twatch.py, a tool to watch "cycles" events together with task (fork, exit) and comm perf events. For now, due to me not being able to grok how python distutils cope with building C extensions outside the sources dir the install target just builds it, I'm using it as: [root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/ [root@emilia linux]# tools/perf/python/twatch.py cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: } cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: } cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: } cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: } cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: } cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: } cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: } cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534} cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls } cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024} The first 8 mmap events in this 8 way machine are a mistery that is still being investigated. More of the tools/perf/util/ APIs will be exposed via this python binding as the need arises. For now the focus is on creating events and processing them, symbol resolution is an obvious next step, with tracepoint variables as a close second step. Cc: Clark Williams <williams@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
PyObject *file;
perf tools: Add Python 3 support Added Python 3 support while keeping Python 2.7 compatibility. Committer notes: This doesn't make it to auto detect python 3, one has to explicitely ask it to build with python 3 devel files, here are the instructions provided by Jaroslav: --- $ cp -a tools/perf tools/python3-perf $ make V=1 prefix=/usr -C tools/perf PYTHON=/usr/bin/python2 all $ make V=1 prefix=/usr -C tools/python3-perf PYTHON=/usr/bin/python3 all $ make V=1 prefix=/usr -C tools/python3-perf PYTHON=/usr/bin/python3 DESTDIR=%{buildroot} install-python_ext $ make V=1 prefix=/usr -C tools/perf PYTHON=/usr/bin/python2 DESTDIR=%{buildroot} install-python_ext --- We need to make this automatic, just like the existing tests for checking if the python2 devel files are in place, allowing the build with python3 if available, fallbacking to python2 and then just disabling it if none are available. So, using the PYTHON variable to build it using O= we get: Before this patch: $ rpm -q python3 python3-devel python3-3.6.4-7.fc27.x86_64 python3-devel-3.6.4-7.fc27.x86_64 $ rm -rf /tmp/build/perf/ ; mkdir -p /tmp/build/perf ; make O=/tmp/build/perf PYTHON=/usr/bin/python3 -C tools/perf install-bin make: Entering directory '/home/acme/git/linux/tools/perf' <SNIP> Makefile.config:670: Python 3 is not yet supported; please set Makefile.config:671: PYTHON and/or PYTHON_CONFIG appropriately. Makefile.config:672: If you also have Python 2 installed, then Makefile.config:673: try something like: Makefile.config:674: Makefile.config:675: make PYTHON=python2 Makefile.config:676: Makefile.config:677: Otherwise, disable Python support entirely: Makefile.config:678: Makefile.config:679: make NO_LIBPYTHON=1 Makefile.config:680: Makefile.config:681: *** . Stop. make[1]: *** [Makefile.perf:212: sub-make] Error 2 make: *** [Makefile:110: install-bin] Error 2 make: Leaving directory '/home/acme/git/linux/tools/perf' $ After: $ make O=/tmp/build/perf PYTHON=python3 -C tools/perf install-bin $ ldd ~/bin/perf | grep python libpython3.6m.so.1.0 => /lib64/libpython3.6m.so.1.0 (0x00007f58a31e8000) $ rpm -qf /lib64/libpython3.6m.so.1.0 python3-libs-3.6.4-7.fc27.x86_64 $ Now verify that when using the binding the right ELF file is loaded, using perf trace: $ perf trace -e open* perf test python 0.051 ( 0.016 ms): perf/3927 openat(dfd: CWD, filename: /etc/ld.so.cache, flags: CLOEXEC ) = 3 <SNIP> 18: 'import perf' in python : 8.849 ( 0.013 ms): sh/3929 openat(dfd: CWD, filename: /etc/ld.so.cache, flags: CLOEXEC ) = 3 <SNIP> 25.572 ( 0.008 ms): python3/3931 openat(dfd: CWD, filename: /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so, flags: CLOEXEC) = 3 <SNIP> Ok <SNIP> $ And using tools/perf/python/twatch.py, to show PERF_RECORD_ metaevents: $ python3 tools/perf/python/twatch.py cpu: 3, pid: 16060, tid: 16060 { type: fork, pid: 5207, ppid: 16060, tid: 5207, ptid: 16060, time: 10798513015459} cpu: 3, pid: 16060, tid: 16060 { type: fork, pid: 5208, ppid: 16060, tid: 5208, ptid: 16060, time: 10798513562503} cpu: 0, pid: 5208, tid: 5208 { type: comm, pid: 5208, tid: 5208, comm: grep } cpu: 2, pid: 5207, tid: 5207 { type: comm, pid: 5207, tid: 5207, comm: ps } cpu: 2, pid: 5207, tid: 5207 { type: exit, pid: 5207, ppid: 5207, tid: 5207, ptid: 5207, time: 10798551337484} cpu: 3, pid: 5208, tid: 5208 { type: exit, pid: 5208, ppid: 5208, tid: 5208, ptid: 5208, time: 10798551292153} cpu: 3, pid: 601, tid: 601 { type: fork, pid: 5209, ppid: 601, tid: 5209, ptid: 601, time: 10801779977324} ^CTraceback (most recent call last): File "tools/perf/python/twatch.py", line 68, in <module> main() File "tools/perf/python/twatch.py", line 40, in main evlist.poll(timeout = -1) KeyboardInterrupt $ # ps ax|grep twatch 5197 pts/8 S+ 0:00 python3 tools/perf/python/twatch.py # ls -la /proc/5197/smaps -r--r--r--. 1 acme acme 0 Feb 19 13:14 /proc/5197/smaps # grep python /proc/5197/smaps 558111307000-558111309000 r-xp 00000000 fd:00 3151710 /usr/bin/python3.6 558111508000-558111509000 r--p 00001000 fd:00 3151710 /usr/bin/python3.6 558111509000-55811150a000 rw-p 00002000 fd:00 3151710 /usr/bin/python3.6 7ffad6fc1000-7ffad7008000 r-xp 00000000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so 7ffad7008000-7ffad7207000 ---p 00047000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so 7ffad7207000-7ffad7208000 r--p 00046000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so 7ffad7208000-7ffad7215000 rw-p 00047000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so 7ffadea77000-7ffaded3d000 r-xp 00000000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0 7ffaded3d000-7ffadef3c000 ---p 002c6000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0 7ffadef3c000-7ffadef42000 r--p 002c5000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0 7ffadef42000-7ffadefa5000 rw-p 002cb000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0 # And with this patch, but building normally, without specifying the PYTHON=python3 part, which will make it use python2 if its devel files are available, like in this test: $ make O=/tmp/build/perf -C tools/perf install-bin $ ldd ~/bin/perf | grep python libpython2.7.so.1.0 => /lib64/libpython2.7.so.1.0 (0x00007f6a44410000) $ ldd /tmp/build/perf/python_ext_build/lib/perf.so | grep python libpython2.7.so.1.0 => /lib64/libpython2.7.so.1.0 (0x00007fed28a2c000) $ [acme@jouet perf]$ tools/perf/python/twatch.py cpu: 0, pid: 2817, tid: 2817 { type: fork, pid: 2817, ppid: 2817, tid: 8910, ptid: 2817, time: 11126454335306} cpu: 0, pid: 2817, tid: 2817 { type: comm, pid: 2817, tid: 8910, comm: worker } $ ps ax | grep twatch.py 8909 pts/8 S+ 0:00 /usr/bin/python tools/perf/python/twatch.py $ grep python /proc/8909/smaps 5579de658000-5579de659000 r-xp 00000000 fd:00 3156044 /usr/bin/python2.7 5579de858000-5579de859000 r--p 00000000 fd:00 3156044 /usr/bin/python2.7 5579de859000-5579de85a000 rw-p 00001000 fd:00 3156044 /usr/bin/python2.7 7f0de01f7000-7f0de023e000 r-xp 00000000 00:2d 230695 /tmp/build/perf/python/perf.so 7f0de023e000-7f0de043d000 ---p 00047000 00:2d 230695 /tmp/build/perf/python/perf.so 7f0de043d000-7f0de043e000 r--p 00046000 00:2d 230695 /tmp/build/perf/python/perf.so 7f0de043e000-7f0de044b000 rw-p 00047000 00:2d 230695 /tmp/build/perf/python/perf.so 7f0de6f0f000-7f0de6f13000 r-xp 00000000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so 7f0de6f13000-7f0de7113000 ---p 00004000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so 7f0de7113000-7f0de7114000 r--p 00004000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so 7f0de7114000-7f0de7115000 rw-p 00005000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so 7f0de7e73000-7f0de8052000 r-xp 00000000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0 7f0de8052000-7f0de8251000 ---p 001df000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0 7f0de8251000-7f0de8255000 r--p 001de000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0 7f0de8255000-7f0de8291000 rw-p 001e2000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0 $ Signed-off-by: Jaroslav Škarvada <jskarvad@redhat.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> LPU-Reference: 20180119205641.24242-1-jskarvad@redhat.com Link: https://lkml.kernel.org/n/tip-8d7dt9kqp83vsz25hagug8fu@git.kernel.org [ Removed explicit check for python version, allowing it to really build with python3 ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-01-19 21:56:41 +01:00
#if PY_MAJOR_VERSION < 3
FILE *fp = fdopen(evlist->core.pollfd.entries[i].fd, "r");
perf tools: Initial python binding First clarifying that this kind of binding is not a replacement or an equivalent to the 'perf script' way of using python with perf. The 'perf script' way is to process events and look at a given script for some python function that matches the events to pass each event for processing. This is a python module, i.e. everything is driven from the python script, that merely uses "import perf" or "from perf import". perf script is focused on tracepoints, this binding is focused on profiling as an initial target. More work is needed to make available tracepoint specific variables as event variables accessible via this binding. There is one example of such usage model, in tools/perf/python/twatch.py, a tool to watch "cycles" events together with task (fork, exit) and comm perf events. For now, due to me not being able to grok how python distutils cope with building C extensions outside the sources dir the install target just builds it, I'm using it as: [root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/ [root@emilia linux]# tools/perf/python/twatch.py cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: } cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: } cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: } cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: } cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: } cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: } cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: } cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534} cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls } cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024} The first 8 mmap events in this 8 way machine are a mistery that is still being investigated. More of the tools/perf/util/ APIs will be exposed via this python binding as the need arises. For now the focus is on creating events and processing them, symbol resolution is an obvious next step, with tracepoint variables as a close second step. Cc: Clark Williams <williams@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
if (fp == NULL)
goto free_list;
file = PyFile_FromFile(fp, "perf", "r", NULL);
perf tools: Add Python 3 support Added Python 3 support while keeping Python 2.7 compatibility. Committer notes: This doesn't make it to auto detect python 3, one has to explicitely ask it to build with python 3 devel files, here are the instructions provided by Jaroslav: --- $ cp -a tools/perf tools/python3-perf $ make V=1 prefix=/usr -C tools/perf PYTHON=/usr/bin/python2 all $ make V=1 prefix=/usr -C tools/python3-perf PYTHON=/usr/bin/python3 all $ make V=1 prefix=/usr -C tools/python3-perf PYTHON=/usr/bin/python3 DESTDIR=%{buildroot} install-python_ext $ make V=1 prefix=/usr -C tools/perf PYTHON=/usr/bin/python2 DESTDIR=%{buildroot} install-python_ext --- We need to make this automatic, just like the existing tests for checking if the python2 devel files are in place, allowing the build with python3 if available, fallbacking to python2 and then just disabling it if none are available. So, using the PYTHON variable to build it using O= we get: Before this patch: $ rpm -q python3 python3-devel python3-3.6.4-7.fc27.x86_64 python3-devel-3.6.4-7.fc27.x86_64 $ rm -rf /tmp/build/perf/ ; mkdir -p /tmp/build/perf ; make O=/tmp/build/perf PYTHON=/usr/bin/python3 -C tools/perf install-bin make: Entering directory '/home/acme/git/linux/tools/perf' <SNIP> Makefile.config:670: Python 3 is not yet supported; please set Makefile.config:671: PYTHON and/or PYTHON_CONFIG appropriately. Makefile.config:672: If you also have Python 2 installed, then Makefile.config:673: try something like: Makefile.config:674: Makefile.config:675: make PYTHON=python2 Makefile.config:676: Makefile.config:677: Otherwise, disable Python support entirely: Makefile.config:678: Makefile.config:679: make NO_LIBPYTHON=1 Makefile.config:680: Makefile.config:681: *** . Stop. make[1]: *** [Makefile.perf:212: sub-make] Error 2 make: *** [Makefile:110: install-bin] Error 2 make: Leaving directory '/home/acme/git/linux/tools/perf' $ After: $ make O=/tmp/build/perf PYTHON=python3 -C tools/perf install-bin $ ldd ~/bin/perf | grep python libpython3.6m.so.1.0 => /lib64/libpython3.6m.so.1.0 (0x00007f58a31e8000) $ rpm -qf /lib64/libpython3.6m.so.1.0 python3-libs-3.6.4-7.fc27.x86_64 $ Now verify that when using the binding the right ELF file is loaded, using perf trace: $ perf trace -e open* perf test python 0.051 ( 0.016 ms): perf/3927 openat(dfd: CWD, filename: /etc/ld.so.cache, flags: CLOEXEC ) = 3 <SNIP> 18: 'import perf' in python : 8.849 ( 0.013 ms): sh/3929 openat(dfd: CWD, filename: /etc/ld.so.cache, flags: CLOEXEC ) = 3 <SNIP> 25.572 ( 0.008 ms): python3/3931 openat(dfd: CWD, filename: /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so, flags: CLOEXEC) = 3 <SNIP> Ok <SNIP> $ And using tools/perf/python/twatch.py, to show PERF_RECORD_ metaevents: $ python3 tools/perf/python/twatch.py cpu: 3, pid: 16060, tid: 16060 { type: fork, pid: 5207, ppid: 16060, tid: 5207, ptid: 16060, time: 10798513015459} cpu: 3, pid: 16060, tid: 16060 { type: fork, pid: 5208, ppid: 16060, tid: 5208, ptid: 16060, time: 10798513562503} cpu: 0, pid: 5208, tid: 5208 { type: comm, pid: 5208, tid: 5208, comm: grep } cpu: 2, pid: 5207, tid: 5207 { type: comm, pid: 5207, tid: 5207, comm: ps } cpu: 2, pid: 5207, tid: 5207 { type: exit, pid: 5207, ppid: 5207, tid: 5207, ptid: 5207, time: 10798551337484} cpu: 3, pid: 5208, tid: 5208 { type: exit, pid: 5208, ppid: 5208, tid: 5208, ptid: 5208, time: 10798551292153} cpu: 3, pid: 601, tid: 601 { type: fork, pid: 5209, ppid: 601, tid: 5209, ptid: 601, time: 10801779977324} ^CTraceback (most recent call last): File "tools/perf/python/twatch.py", line 68, in <module> main() File "tools/perf/python/twatch.py", line 40, in main evlist.poll(timeout = -1) KeyboardInterrupt $ # ps ax|grep twatch 5197 pts/8 S+ 0:00 python3 tools/perf/python/twatch.py # ls -la /proc/5197/smaps -r--r--r--. 1 acme acme 0 Feb 19 13:14 /proc/5197/smaps # grep python /proc/5197/smaps 558111307000-558111309000 r-xp 00000000 fd:00 3151710 /usr/bin/python3.6 558111508000-558111509000 r--p 00001000 fd:00 3151710 /usr/bin/python3.6 558111509000-55811150a000 rw-p 00002000 fd:00 3151710 /usr/bin/python3.6 7ffad6fc1000-7ffad7008000 r-xp 00000000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so 7ffad7008000-7ffad7207000 ---p 00047000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so 7ffad7207000-7ffad7208000 r--p 00046000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so 7ffad7208000-7ffad7215000 rw-p 00047000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so 7ffadea77000-7ffaded3d000 r-xp 00000000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0 7ffaded3d000-7ffadef3c000 ---p 002c6000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0 7ffadef3c000-7ffadef42000 r--p 002c5000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0 7ffadef42000-7ffadefa5000 rw-p 002cb000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0 # And with this patch, but building normally, without specifying the PYTHON=python3 part, which will make it use python2 if its devel files are available, like in this test: $ make O=/tmp/build/perf -C tools/perf install-bin $ ldd ~/bin/perf | grep python libpython2.7.so.1.0 => /lib64/libpython2.7.so.1.0 (0x00007f6a44410000) $ ldd /tmp/build/perf/python_ext_build/lib/perf.so | grep python libpython2.7.so.1.0 => /lib64/libpython2.7.so.1.0 (0x00007fed28a2c000) $ [acme@jouet perf]$ tools/perf/python/twatch.py cpu: 0, pid: 2817, tid: 2817 { type: fork, pid: 2817, ppid: 2817, tid: 8910, ptid: 2817, time: 11126454335306} cpu: 0, pid: 2817, tid: 2817 { type: comm, pid: 2817, tid: 8910, comm: worker } $ ps ax | grep twatch.py 8909 pts/8 S+ 0:00 /usr/bin/python tools/perf/python/twatch.py $ grep python /proc/8909/smaps 5579de658000-5579de659000 r-xp 00000000 fd:00 3156044 /usr/bin/python2.7 5579de858000-5579de859000 r--p 00000000 fd:00 3156044 /usr/bin/python2.7 5579de859000-5579de85a000 rw-p 00001000 fd:00 3156044 /usr/bin/python2.7 7f0de01f7000-7f0de023e000 r-xp 00000000 00:2d 230695 /tmp/build/perf/python/perf.so 7f0de023e000-7f0de043d000 ---p 00047000 00:2d 230695 /tmp/build/perf/python/perf.so 7f0de043d000-7f0de043e000 r--p 00046000 00:2d 230695 /tmp/build/perf/python/perf.so 7f0de043e000-7f0de044b000 rw-p 00047000 00:2d 230695 /tmp/build/perf/python/perf.so 7f0de6f0f000-7f0de6f13000 r-xp 00000000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so 7f0de6f13000-7f0de7113000 ---p 00004000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so 7f0de7113000-7f0de7114000 r--p 00004000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so 7f0de7114000-7f0de7115000 rw-p 00005000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so 7f0de7e73000-7f0de8052000 r-xp 00000000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0 7f0de8052000-7f0de8251000 ---p 001df000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0 7f0de8251000-7f0de8255000 r--p 001de000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0 7f0de8255000-7f0de8291000 rw-p 001e2000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0 $ Signed-off-by: Jaroslav Škarvada <jskarvad@redhat.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> LPU-Reference: 20180119205641.24242-1-jskarvad@redhat.com Link: https://lkml.kernel.org/n/tip-8d7dt9kqp83vsz25hagug8fu@git.kernel.org [ Removed explicit check for python version, allowing it to really build with python3 ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-01-19 21:56:41 +01:00
#else
file = PyFile_FromFd(evlist->core.pollfd.entries[i].fd, "perf", "r", -1,
NULL, NULL, NULL, 0);
perf tools: Add Python 3 support Added Python 3 support while keeping Python 2.7 compatibility. Committer notes: This doesn't make it to auto detect python 3, one has to explicitely ask it to build with python 3 devel files, here are the instructions provided by Jaroslav: --- $ cp -a tools/perf tools/python3-perf $ make V=1 prefix=/usr -C tools/perf PYTHON=/usr/bin/python2 all $ make V=1 prefix=/usr -C tools/python3-perf PYTHON=/usr/bin/python3 all $ make V=1 prefix=/usr -C tools/python3-perf PYTHON=/usr/bin/python3 DESTDIR=%{buildroot} install-python_ext $ make V=1 prefix=/usr -C tools/perf PYTHON=/usr/bin/python2 DESTDIR=%{buildroot} install-python_ext --- We need to make this automatic, just like the existing tests for checking if the python2 devel files are in place, allowing the build with python3 if available, fallbacking to python2 and then just disabling it if none are available. So, using the PYTHON variable to build it using O= we get: Before this patch: $ rpm -q python3 python3-devel python3-3.6.4-7.fc27.x86_64 python3-devel-3.6.4-7.fc27.x86_64 $ rm -rf /tmp/build/perf/ ; mkdir -p /tmp/build/perf ; make O=/tmp/build/perf PYTHON=/usr/bin/python3 -C tools/perf install-bin make: Entering directory '/home/acme/git/linux/tools/perf' <SNIP> Makefile.config:670: Python 3 is not yet supported; please set Makefile.config:671: PYTHON and/or PYTHON_CONFIG appropriately. Makefile.config:672: If you also have Python 2 installed, then Makefile.config:673: try something like: Makefile.config:674: Makefile.config:675: make PYTHON=python2 Makefile.config:676: Makefile.config:677: Otherwise, disable Python support entirely: Makefile.config:678: Makefile.config:679: make NO_LIBPYTHON=1 Makefile.config:680: Makefile.config:681: *** . Stop. make[1]: *** [Makefile.perf:212: sub-make] Error 2 make: *** [Makefile:110: install-bin] Error 2 make: Leaving directory '/home/acme/git/linux/tools/perf' $ After: $ make O=/tmp/build/perf PYTHON=python3 -C tools/perf install-bin $ ldd ~/bin/perf | grep python libpython3.6m.so.1.0 => /lib64/libpython3.6m.so.1.0 (0x00007f58a31e8000) $ rpm -qf /lib64/libpython3.6m.so.1.0 python3-libs-3.6.4-7.fc27.x86_64 $ Now verify that when using the binding the right ELF file is loaded, using perf trace: $ perf trace -e open* perf test python 0.051 ( 0.016 ms): perf/3927 openat(dfd: CWD, filename: /etc/ld.so.cache, flags: CLOEXEC ) = 3 <SNIP> 18: 'import perf' in python : 8.849 ( 0.013 ms): sh/3929 openat(dfd: CWD, filename: /etc/ld.so.cache, flags: CLOEXEC ) = 3 <SNIP> 25.572 ( 0.008 ms): python3/3931 openat(dfd: CWD, filename: /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so, flags: CLOEXEC) = 3 <SNIP> Ok <SNIP> $ And using tools/perf/python/twatch.py, to show PERF_RECORD_ metaevents: $ python3 tools/perf/python/twatch.py cpu: 3, pid: 16060, tid: 16060 { type: fork, pid: 5207, ppid: 16060, tid: 5207, ptid: 16060, time: 10798513015459} cpu: 3, pid: 16060, tid: 16060 { type: fork, pid: 5208, ppid: 16060, tid: 5208, ptid: 16060, time: 10798513562503} cpu: 0, pid: 5208, tid: 5208 { type: comm, pid: 5208, tid: 5208, comm: grep } cpu: 2, pid: 5207, tid: 5207 { type: comm, pid: 5207, tid: 5207, comm: ps } cpu: 2, pid: 5207, tid: 5207 { type: exit, pid: 5207, ppid: 5207, tid: 5207, ptid: 5207, time: 10798551337484} cpu: 3, pid: 5208, tid: 5208 { type: exit, pid: 5208, ppid: 5208, tid: 5208, ptid: 5208, time: 10798551292153} cpu: 3, pid: 601, tid: 601 { type: fork, pid: 5209, ppid: 601, tid: 5209, ptid: 601, time: 10801779977324} ^CTraceback (most recent call last): File "tools/perf/python/twatch.py", line 68, in <module> main() File "tools/perf/python/twatch.py", line 40, in main evlist.poll(timeout = -1) KeyboardInterrupt $ # ps ax|grep twatch 5197 pts/8 S+ 0:00 python3 tools/perf/python/twatch.py # ls -la /proc/5197/smaps -r--r--r--. 1 acme acme 0 Feb 19 13:14 /proc/5197/smaps # grep python /proc/5197/smaps 558111307000-558111309000 r-xp 00000000 fd:00 3151710 /usr/bin/python3.6 558111508000-558111509000 r--p 00001000 fd:00 3151710 /usr/bin/python3.6 558111509000-55811150a000 rw-p 00002000 fd:00 3151710 /usr/bin/python3.6 7ffad6fc1000-7ffad7008000 r-xp 00000000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so 7ffad7008000-7ffad7207000 ---p 00047000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so 7ffad7207000-7ffad7208000 r--p 00046000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so 7ffad7208000-7ffad7215000 rw-p 00047000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so 7ffadea77000-7ffaded3d000 r-xp 00000000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0 7ffaded3d000-7ffadef3c000 ---p 002c6000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0 7ffadef3c000-7ffadef42000 r--p 002c5000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0 7ffadef42000-7ffadefa5000 rw-p 002cb000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0 # And with this patch, but building normally, without specifying the PYTHON=python3 part, which will make it use python2 if its devel files are available, like in this test: $ make O=/tmp/build/perf -C tools/perf install-bin $ ldd ~/bin/perf | grep python libpython2.7.so.1.0 => /lib64/libpython2.7.so.1.0 (0x00007f6a44410000) $ ldd /tmp/build/perf/python_ext_build/lib/perf.so | grep python libpython2.7.so.1.0 => /lib64/libpython2.7.so.1.0 (0x00007fed28a2c000) $ [acme@jouet perf]$ tools/perf/python/twatch.py cpu: 0, pid: 2817, tid: 2817 { type: fork, pid: 2817, ppid: 2817, tid: 8910, ptid: 2817, time: 11126454335306} cpu: 0, pid: 2817, tid: 2817 { type: comm, pid: 2817, tid: 8910, comm: worker } $ ps ax | grep twatch.py 8909 pts/8 S+ 0:00 /usr/bin/python tools/perf/python/twatch.py $ grep python /proc/8909/smaps 5579de658000-5579de659000 r-xp 00000000 fd:00 3156044 /usr/bin/python2.7 5579de858000-5579de859000 r--p 00000000 fd:00 3156044 /usr/bin/python2.7 5579de859000-5579de85a000 rw-p 00001000 fd:00 3156044 /usr/bin/python2.7 7f0de01f7000-7f0de023e000 r-xp 00000000 00:2d 230695 /tmp/build/perf/python/perf.so 7f0de023e000-7f0de043d000 ---p 00047000 00:2d 230695 /tmp/build/perf/python/perf.so 7f0de043d000-7f0de043e000 r--p 00046000 00:2d 230695 /tmp/build/perf/python/perf.so 7f0de043e000-7f0de044b000 rw-p 00047000 00:2d 230695 /tmp/build/perf/python/perf.so 7f0de6f0f000-7f0de6f13000 r-xp 00000000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so 7f0de6f13000-7f0de7113000 ---p 00004000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so 7f0de7113000-7f0de7114000 r--p 00004000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so 7f0de7114000-7f0de7115000 rw-p 00005000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so 7f0de7e73000-7f0de8052000 r-xp 00000000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0 7f0de8052000-7f0de8251000 ---p 001df000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0 7f0de8251000-7f0de8255000 r--p 001de000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0 7f0de8255000-7f0de8291000 rw-p 001e2000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0 $ Signed-off-by: Jaroslav Škarvada <jskarvad@redhat.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> LPU-Reference: 20180119205641.24242-1-jskarvad@redhat.com Link: https://lkml.kernel.org/n/tip-8d7dt9kqp83vsz25hagug8fu@git.kernel.org [ Removed explicit check for python version, allowing it to really build with python3 ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-01-19 21:56:41 +01:00
#endif
perf tools: Initial python binding First clarifying that this kind of binding is not a replacement or an equivalent to the 'perf script' way of using python with perf. The 'perf script' way is to process events and look at a given script for some python function that matches the events to pass each event for processing. This is a python module, i.e. everything is driven from the python script, that merely uses "import perf" or "from perf import". perf script is focused on tracepoints, this binding is focused on profiling as an initial target. More work is needed to make available tracepoint specific variables as event variables accessible via this binding. There is one example of such usage model, in tools/perf/python/twatch.py, a tool to watch "cycles" events together with task (fork, exit) and comm perf events. For now, due to me not being able to grok how python distutils cope with building C extensions outside the sources dir the install target just builds it, I'm using it as: [root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/ [root@emilia linux]# tools/perf/python/twatch.py cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: } cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: } cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: } cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: } cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: } cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: } cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: } cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534} cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls } cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024} The first 8 mmap events in this 8 way machine are a mistery that is still being investigated. More of the tools/perf/util/ APIs will be exposed via this python binding as the need arises. For now the focus is on creating events and processing them, symbol resolution is an obvious next step, with tracepoint variables as a close second step. Cc: Clark Williams <williams@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
if (file == NULL)
goto free_list;
if (PyList_Append(list, file) != 0) {
Py_DECREF(file);
goto free_list;
}
perf tools: Initial python binding First clarifying that this kind of binding is not a replacement or an equivalent to the 'perf script' way of using python with perf. The 'perf script' way is to process events and look at a given script for some python function that matches the events to pass each event for processing. This is a python module, i.e. everything is driven from the python script, that merely uses "import perf" or "from perf import". perf script is focused on tracepoints, this binding is focused on profiling as an initial target. More work is needed to make available tracepoint specific variables as event variables accessible via this binding. There is one example of such usage model, in tools/perf/python/twatch.py, a tool to watch "cycles" events together with task (fork, exit) and comm perf events. For now, due to me not being able to grok how python distutils cope with building C extensions outside the sources dir the install target just builds it, I'm using it as: [root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/ [root@emilia linux]# tools/perf/python/twatch.py cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: } cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: } cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: } cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: } cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: } cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: } cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: } cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534} cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls } cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024} The first 8 mmap events in this 8 way machine are a mistery that is still being investigated. More of the tools/perf/util/ APIs will be exposed via this python binding as the need arises. For now the focus is on creating events and processing them, symbol resolution is an obvious next step, with tracepoint variables as a close second step. Cc: Clark Williams <williams@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
Py_DECREF(file);
}
return list;
free_list:
return PyErr_NoMemory();
}
static PyObject *pyrf_evlist__add(struct pyrf_evlist *pevlist,
perf tools: Use __maybe_used for unused variables perf defines both __used and __unused variables to use for marking unused variables. The variable __used is defined to __attribute__((__unused__)), which contradicts the kernel definition to __attribute__((__used__)) for new gcc versions. On Android, __used is also defined in system headers and this leads to warnings like: warning: '__used__' attribute ignored __unused is not defined in the kernel and is not a standard definition. If __unused is included everywhere instead of __used, this leads to conflicts with glibc headers, since glibc has a variables with this name in its headers. The best approach is to use __maybe_unused, the definition used in the kernel for __attribute__((unused)). In this way there is only one definition in perf sources (instead of 2 definitions that point to the same thing: __used and __unused) and it works on both Linux and Android. This patch simply replaces all instances of __used and __unused with __maybe_unused. Signed-off-by: Irina Tirdea <irina.tirdea@intel.com> Acked-by: Pekka Enberg <penberg@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/1347315303-29906-7-git-send-email-irina.tirdea@intel.com [ committer note: fixed up conflict with a116e05 in builtin-sched.c ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-11 01:15:03 +03:00
PyObject *args,
PyObject *kwargs __maybe_unused)
perf tools: Initial python binding First clarifying that this kind of binding is not a replacement or an equivalent to the 'perf script' way of using python with perf. The 'perf script' way is to process events and look at a given script for some python function that matches the events to pass each event for processing. This is a python module, i.e. everything is driven from the python script, that merely uses "import perf" or "from perf import". perf script is focused on tracepoints, this binding is focused on profiling as an initial target. More work is needed to make available tracepoint specific variables as event variables accessible via this binding. There is one example of such usage model, in tools/perf/python/twatch.py, a tool to watch "cycles" events together with task (fork, exit) and comm perf events. For now, due to me not being able to grok how python distutils cope with building C extensions outside the sources dir the install target just builds it, I'm using it as: [root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/ [root@emilia linux]# tools/perf/python/twatch.py cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: } cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: } cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: } cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: } cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: } cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: } cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: } cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534} cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls } cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024} The first 8 mmap events in this 8 way machine are a mistery that is still being investigated. More of the tools/perf/util/ APIs will be exposed via this python binding as the need arises. For now the focus is on creating events and processing them, symbol resolution is an obvious next step, with tracepoint variables as a close second step. Cc: Clark Williams <williams@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
{
struct evlist *evlist = &pevlist->evlist;
perf tools: Initial python binding First clarifying that this kind of binding is not a replacement or an equivalent to the 'perf script' way of using python with perf. The 'perf script' way is to process events and look at a given script for some python function that matches the events to pass each event for processing. This is a python module, i.e. everything is driven from the python script, that merely uses "import perf" or "from perf import". perf script is focused on tracepoints, this binding is focused on profiling as an initial target. More work is needed to make available tracepoint specific variables as event variables accessible via this binding. There is one example of such usage model, in tools/perf/python/twatch.py, a tool to watch "cycles" events together with task (fork, exit) and comm perf events. For now, due to me not being able to grok how python distutils cope with building C extensions outside the sources dir the install target just builds it, I'm using it as: [root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/ [root@emilia linux]# tools/perf/python/twatch.py cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: } cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: } cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: } cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: } cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: } cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: } cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: } cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534} cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls } cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024} The first 8 mmap events in this 8 way machine are a mistery that is still being investigated. More of the tools/perf/util/ APIs will be exposed via this python binding as the need arises. For now the focus is on creating events and processing them, symbol resolution is an obvious next step, with tracepoint variables as a close second step. Cc: Clark Williams <williams@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
PyObject *pevsel;
struct evsel *evsel;
perf tools: Initial python binding First clarifying that this kind of binding is not a replacement or an equivalent to the 'perf script' way of using python with perf. The 'perf script' way is to process events and look at a given script for some python function that matches the events to pass each event for processing. This is a python module, i.e. everything is driven from the python script, that merely uses "import perf" or "from perf import". perf script is focused on tracepoints, this binding is focused on profiling as an initial target. More work is needed to make available tracepoint specific variables as event variables accessible via this binding. There is one example of such usage model, in tools/perf/python/twatch.py, a tool to watch "cycles" events together with task (fork, exit) and comm perf events. For now, due to me not being able to grok how python distutils cope with building C extensions outside the sources dir the install target just builds it, I'm using it as: [root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/ [root@emilia linux]# tools/perf/python/twatch.py cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: } cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: } cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: } cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: } cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: } cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: } cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: } cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534} cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls } cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024} The first 8 mmap events in this 8 way machine are a mistery that is still being investigated. More of the tools/perf/util/ APIs will be exposed via this python binding as the need arises. For now the focus is on creating events and processing them, symbol resolution is an obvious next step, with tracepoint variables as a close second step. Cc: Clark Williams <williams@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
if (!PyArg_ParseTuple(args, "O", &pevsel))
return NULL;
Py_INCREF(pevsel);
evsel = &((struct pyrf_evsel *)pevsel)->evsel;
evsel->core.idx = evlist->core.nr_entries;
evlist__add(evlist, evsel);
perf tools: Initial python binding First clarifying that this kind of binding is not a replacement or an equivalent to the 'perf script' way of using python with perf. The 'perf script' way is to process events and look at a given script for some python function that matches the events to pass each event for processing. This is a python module, i.e. everything is driven from the python script, that merely uses "import perf" or "from perf import". perf script is focused on tracepoints, this binding is focused on profiling as an initial target. More work is needed to make available tracepoint specific variables as event variables accessible via this binding. There is one example of such usage model, in tools/perf/python/twatch.py, a tool to watch "cycles" events together with task (fork, exit) and comm perf events. For now, due to me not being able to grok how python distutils cope with building C extensions outside the sources dir the install target just builds it, I'm using it as: [root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/ [root@emilia linux]# tools/perf/python/twatch.py cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: } cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: } cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: } cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: } cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: } cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: } cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: } cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534} cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls } cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024} The first 8 mmap events in this 8 way machine are a mistery that is still being investigated. More of the tools/perf/util/ APIs will be exposed via this python binding as the need arises. For now the focus is on creating events and processing them, symbol resolution is an obvious next step, with tracepoint variables as a close second step. Cc: Clark Williams <williams@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
return Py_BuildValue("i", evlist->core.nr_entries);
perf tools: Initial python binding First clarifying that this kind of binding is not a replacement or an equivalent to the 'perf script' way of using python with perf. The 'perf script' way is to process events and look at a given script for some python function that matches the events to pass each event for processing. This is a python module, i.e. everything is driven from the python script, that merely uses "import perf" or "from perf import". perf script is focused on tracepoints, this binding is focused on profiling as an initial target. More work is needed to make available tracepoint specific variables as event variables accessible via this binding. There is one example of such usage model, in tools/perf/python/twatch.py, a tool to watch "cycles" events together with task (fork, exit) and comm perf events. For now, due to me not being able to grok how python distutils cope with building C extensions outside the sources dir the install target just builds it, I'm using it as: [root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/ [root@emilia linux]# tools/perf/python/twatch.py cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: } cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: } cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: } cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: } cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: } cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: } cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: } cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534} cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls } cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024} The first 8 mmap events in this 8 way machine are a mistery that is still being investigated. More of the tools/perf/util/ APIs will be exposed via this python binding as the need arises. For now the focus is on creating events and processing them, symbol resolution is an obvious next step, with tracepoint variables as a close second step. Cc: Clark Williams <williams@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
}
static struct mmap *get_md(struct evlist *evlist, int cpu)
perf python: Fix pyrf_evlist__read_on_cpu() interface Jaroslav reported errors from valgrind over perf python script: # echo 0 > /sys/devices/system/cpu/cpu4/online # valgrind ./test.py ==7524== Memcheck, a memory error detector ... ==7524== Command: ./test.py ==7524== pid 7526 exited ==7524== Invalid read of size 8 ==7524== at 0xCC2C2B3: perf_mmap__read_forward (evlist.c:780) ==7524== by 0xCC2A681: pyrf_evlist__read_on_cpu (python.c:959) ... ==7524== Address 0x65c4868 is 16 bytes after a block of size 459,36.. ==7524== at 0x4C2B955: calloc (vg_replace_malloc.c:711) ==7524== by 0xCC2F484: zalloc (util.h:35) ==7524== by 0xCC2F484: perf_evlist__alloc_mmap (evlist.c:978) ... The reason for this is in the python interface, that allows a script to pass arbitrary cpu number, which is then used to access struct perf_evlist::mmap array. That's obviously wrong and works only when if all cpus are available and fails if some cpu is missing, like in the example above. This patch makes pyrf_evlist__read_on_cpu() search the evlist's maps array for the proper map to access. It's linear search at the moment. Based on the way how is the read_on_cpu used, I don't think we need to be fast in here. But we could add some hash in the middle to make it fast/er. We don't allow python interface to set write_backward event attribute, so it's safe to check only evlist's mmaps. Reported-by: Jaroslav Škarvada <jskarvad@redhat.com> Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Joe Mario <jmario@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20180817114556.28000-3-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-08-17 13:45:56 +02:00
{
int i;
for (i = 0; i < evlist->core.nr_mmaps; i++) {
struct mmap *md = &evlist->mmap[i];
perf python: Fix pyrf_evlist__read_on_cpu() interface Jaroslav reported errors from valgrind over perf python script: # echo 0 > /sys/devices/system/cpu/cpu4/online # valgrind ./test.py ==7524== Memcheck, a memory error detector ... ==7524== Command: ./test.py ==7524== pid 7526 exited ==7524== Invalid read of size 8 ==7524== at 0xCC2C2B3: perf_mmap__read_forward (evlist.c:780) ==7524== by 0xCC2A681: pyrf_evlist__read_on_cpu (python.c:959) ... ==7524== Address 0x65c4868 is 16 bytes after a block of size 459,36.. ==7524== at 0x4C2B955: calloc (vg_replace_malloc.c:711) ==7524== by 0xCC2F484: zalloc (util.h:35) ==7524== by 0xCC2F484: perf_evlist__alloc_mmap (evlist.c:978) ... The reason for this is in the python interface, that allows a script to pass arbitrary cpu number, which is then used to access struct perf_evlist::mmap array. That's obviously wrong and works only when if all cpus are available and fails if some cpu is missing, like in the example above. This patch makes pyrf_evlist__read_on_cpu() search the evlist's maps array for the proper map to access. It's linear search at the moment. Based on the way how is the read_on_cpu used, I don't think we need to be fast in here. But we could add some hash in the middle to make it fast/er. We don't allow python interface to set write_backward event attribute, so it's safe to check only evlist's mmaps. Reported-by: Jaroslav Škarvada <jskarvad@redhat.com> Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Joe Mario <jmario@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20180817114556.28000-3-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-08-17 13:45:56 +02:00
perf cpumap: Give CPUs their own type A common problem is confusing CPU map indices with the CPU, by wrapping the CPU with a struct then this is avoided. This approach is similar to atomic_t. Committer notes: To make it build with BUILD_BPF_SKEL=1 these files needed the conversions to 'struct perf_cpu' usage: tools/perf/util/bpf_counter.c tools/perf/util/bpf_counter_cgroup.c tools/perf/util/bpf_ftrace.c Also perf_env__get_cpu() was removed back in "perf cpumap: Switch cpu_map__build_map to cpu function". Additionally these needed to be fixed for the ARM builds to complete: tools/perf/arch/arm/util/cs-etm.c tools/perf/arch/arm64/util/pmu.c Suggested-by: John Garry <john.garry@huawei.com> Signed-off-by: Ian Rogers <irogers@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Clark <james.clark@arm.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Mike Leach <mike.leach@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Clarke <pc@us.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Riccardo Mancini <rickyman7@gmail.com> Cc: Stephane Eranian <eranian@google.com> Cc: Suzuki Poulouse <suzuki.poulose@arm.com> Cc: Vineet Singh <vineet.singh@intel.com> Cc: coresight@lists.linaro.org Cc: linux-arm-kernel@lists.infradead.org Cc: zhengjun.xing@intel.com Link: https://lore.kernel.org/r/20220105061351.120843-49-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-01-04 22:13:51 -08:00
if (md->core.cpu.cpu == cpu)
perf python: Fix pyrf_evlist__read_on_cpu() interface Jaroslav reported errors from valgrind over perf python script: # echo 0 > /sys/devices/system/cpu/cpu4/online # valgrind ./test.py ==7524== Memcheck, a memory error detector ... ==7524== Command: ./test.py ==7524== pid 7526 exited ==7524== Invalid read of size 8 ==7524== at 0xCC2C2B3: perf_mmap__read_forward (evlist.c:780) ==7524== by 0xCC2A681: pyrf_evlist__read_on_cpu (python.c:959) ... ==7524== Address 0x65c4868 is 16 bytes after a block of size 459,36.. ==7524== at 0x4C2B955: calloc (vg_replace_malloc.c:711) ==7524== by 0xCC2F484: zalloc (util.h:35) ==7524== by 0xCC2F484: perf_evlist__alloc_mmap (evlist.c:978) ... The reason for this is in the python interface, that allows a script to pass arbitrary cpu number, which is then used to access struct perf_evlist::mmap array. That's obviously wrong and works only when if all cpus are available and fails if some cpu is missing, like in the example above. This patch makes pyrf_evlist__read_on_cpu() search the evlist's maps array for the proper map to access. It's linear search at the moment. Based on the way how is the read_on_cpu used, I don't think we need to be fast in here. But we could add some hash in the middle to make it fast/er. We don't allow python interface to set write_backward event attribute, so it's safe to check only evlist's mmaps. Reported-by: Jaroslav Škarvada <jskarvad@redhat.com> Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Joe Mario <jmario@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20180817114556.28000-3-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-08-17 13:45:56 +02:00
return md;
}
return NULL;
}
perf tools: Initial python binding First clarifying that this kind of binding is not a replacement or an equivalent to the 'perf script' way of using python with perf. The 'perf script' way is to process events and look at a given script for some python function that matches the events to pass each event for processing. This is a python module, i.e. everything is driven from the python script, that merely uses "import perf" or "from perf import". perf script is focused on tracepoints, this binding is focused on profiling as an initial target. More work is needed to make available tracepoint specific variables as event variables accessible via this binding. There is one example of such usage model, in tools/perf/python/twatch.py, a tool to watch "cycles" events together with task (fork, exit) and comm perf events. For now, due to me not being able to grok how python distutils cope with building C extensions outside the sources dir the install target just builds it, I'm using it as: [root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/ [root@emilia linux]# tools/perf/python/twatch.py cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: } cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: } cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: } cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: } cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: } cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: } cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: } cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534} cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls } cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024} The first 8 mmap events in this 8 way machine are a mistery that is still being investigated. More of the tools/perf/util/ APIs will be exposed via this python binding as the need arises. For now the focus is on creating events and processing them, symbol resolution is an obvious next step, with tracepoint variables as a close second step. Cc: Clark Williams <williams@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
static PyObject *pyrf_evlist__read_on_cpu(struct pyrf_evlist *pevlist,
PyObject *args, PyObject *kwargs)
{
struct evlist *evlist = &pevlist->evlist;
perf tools: Initial python binding First clarifying that this kind of binding is not a replacement or an equivalent to the 'perf script' way of using python with perf. The 'perf script' way is to process events and look at a given script for some python function that matches the events to pass each event for processing. This is a python module, i.e. everything is driven from the python script, that merely uses "import perf" or "from perf import". perf script is focused on tracepoints, this binding is focused on profiling as an initial target. More work is needed to make available tracepoint specific variables as event variables accessible via this binding. There is one example of such usage model, in tools/perf/python/twatch.py, a tool to watch "cycles" events together with task (fork, exit) and comm perf events. For now, due to me not being able to grok how python distutils cope with building C extensions outside the sources dir the install target just builds it, I'm using it as: [root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/ [root@emilia linux]# tools/perf/python/twatch.py cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: } cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: } cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: } cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: } cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: } cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: } cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: } cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534} cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls } cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024} The first 8 mmap events in this 8 way machine are a mistery that is still being investigated. More of the tools/perf/util/ APIs will be exposed via this python binding as the need arises. For now the focus is on creating events and processing them, symbol resolution is an obvious next step, with tracepoint variables as a close second step. Cc: Clark Williams <williams@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
union perf_event *event;
int sample_id_all = 1, cpu;
static char *kwlist[] = { "cpu", "sample_id_all", NULL };
struct mmap *md;
int err;
perf tools: Initial python binding First clarifying that this kind of binding is not a replacement or an equivalent to the 'perf script' way of using python with perf. The 'perf script' way is to process events and look at a given script for some python function that matches the events to pass each event for processing. This is a python module, i.e. everything is driven from the python script, that merely uses "import perf" or "from perf import". perf script is focused on tracepoints, this binding is focused on profiling as an initial target. More work is needed to make available tracepoint specific variables as event variables accessible via this binding. There is one example of such usage model, in tools/perf/python/twatch.py, a tool to watch "cycles" events together with task (fork, exit) and comm perf events. For now, due to me not being able to grok how python distutils cope with building C extensions outside the sources dir the install target just builds it, I'm using it as: [root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/ [root@emilia linux]# tools/perf/python/twatch.py cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: } cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: } cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: } cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: } cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: } cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: } cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: } cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534} cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls } cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024} The first 8 mmap events in this 8 way machine are a mistery that is still being investigated. More of the tools/perf/util/ APIs will be exposed via this python binding as the need arises. For now the focus is on creating events and processing them, symbol resolution is an obvious next step, with tracepoint variables as a close second step. Cc: Clark Williams <williams@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
if (!PyArg_ParseTupleAndKeywords(args, kwargs, "i|i", kwlist,
&cpu, &sample_id_all))
return NULL;
perf python: Fix pyrf_evlist__read_on_cpu() interface Jaroslav reported errors from valgrind over perf python script: # echo 0 > /sys/devices/system/cpu/cpu4/online # valgrind ./test.py ==7524== Memcheck, a memory error detector ... ==7524== Command: ./test.py ==7524== pid 7526 exited ==7524== Invalid read of size 8 ==7524== at 0xCC2C2B3: perf_mmap__read_forward (evlist.c:780) ==7524== by 0xCC2A681: pyrf_evlist__read_on_cpu (python.c:959) ... ==7524== Address 0x65c4868 is 16 bytes after a block of size 459,36.. ==7524== at 0x4C2B955: calloc (vg_replace_malloc.c:711) ==7524== by 0xCC2F484: zalloc (util.h:35) ==7524== by 0xCC2F484: perf_evlist__alloc_mmap (evlist.c:978) ... The reason for this is in the python interface, that allows a script to pass arbitrary cpu number, which is then used to access struct perf_evlist::mmap array. That's obviously wrong and works only when if all cpus are available and fails if some cpu is missing, like in the example above. This patch makes pyrf_evlist__read_on_cpu() search the evlist's maps array for the proper map to access. It's linear search at the moment. Based on the way how is the read_on_cpu used, I don't think we need to be fast in here. But we could add some hash in the middle to make it fast/er. We don't allow python interface to set write_backward event attribute, so it's safe to check only evlist's mmaps. Reported-by: Jaroslav Škarvada <jskarvad@redhat.com> Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Joe Mario <jmario@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20180817114556.28000-3-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-08-17 13:45:56 +02:00
md = get_md(evlist, cpu);
if (!md)
return NULL;
if (perf_mmap__read_init(&md->core) < 0)
goto end;
event = perf_mmap__read_event(&md->core);
perf tools: Initial python binding First clarifying that this kind of binding is not a replacement or an equivalent to the 'perf script' way of using python with perf. The 'perf script' way is to process events and look at a given script for some python function that matches the events to pass each event for processing. This is a python module, i.e. everything is driven from the python script, that merely uses "import perf" or "from perf import". perf script is focused on tracepoints, this binding is focused on profiling as an initial target. More work is needed to make available tracepoint specific variables as event variables accessible via this binding. There is one example of such usage model, in tools/perf/python/twatch.py, a tool to watch "cycles" events together with task (fork, exit) and comm perf events. For now, due to me not being able to grok how python distutils cope with building C extensions outside the sources dir the install target just builds it, I'm using it as: [root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/ [root@emilia linux]# tools/perf/python/twatch.py cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: } cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: } cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: } cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: } cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: } cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: } cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: } cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534} cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls } cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024} The first 8 mmap events in this 8 way machine are a mistery that is still being investigated. More of the tools/perf/util/ APIs will be exposed via this python binding as the need arises. For now the focus is on creating events and processing them, symbol resolution is an obvious next step, with tracepoint variables as a close second step. Cc: Clark Williams <williams@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
if (event != NULL) {
PyObject *pyevent = pyrf_event__new(event);
struct pyrf_event *pevent = (struct pyrf_event *)pyevent;
struct evsel *evsel;
perf tools: Initial python binding First clarifying that this kind of binding is not a replacement or an equivalent to the 'perf script' way of using python with perf. The 'perf script' way is to process events and look at a given script for some python function that matches the events to pass each event for processing. This is a python module, i.e. everything is driven from the python script, that merely uses "import perf" or "from perf import". perf script is focused on tracepoints, this binding is focused on profiling as an initial target. More work is needed to make available tracepoint specific variables as event variables accessible via this binding. There is one example of such usage model, in tools/perf/python/twatch.py, a tool to watch "cycles" events together with task (fork, exit) and comm perf events. For now, due to me not being able to grok how python distutils cope with building C extensions outside the sources dir the install target just builds it, I'm using it as: [root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/ [root@emilia linux]# tools/perf/python/twatch.py cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: } cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: } cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: } cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: } cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: } cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: } cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: } cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534} cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls } cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024} The first 8 mmap events in this 8 way machine are a mistery that is still being investigated. More of the tools/perf/util/ APIs will be exposed via this python binding as the need arises. For now the focus is on creating events and processing them, symbol resolution is an obvious next step, with tracepoint variables as a close second step. Cc: Clark Williams <williams@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
if (pyevent == NULL)
return PyErr_NoMemory();
evsel = evlist__event2evsel(evlist, event);
if (!evsel) {
Py_INCREF(Py_None);
return Py_None;
}
pevent->evsel = evsel;
err = evsel__parse_sample(evsel, event, &pevent->sample);
/* Consume the even only after we parsed it out. */
perf_mmap__consume(&md->core);
if (err)
return PyErr_Format(PyExc_OSError,
"perf: can't parse sample, err=%d", err);
perf tools: Initial python binding First clarifying that this kind of binding is not a replacement or an equivalent to the 'perf script' way of using python with perf. The 'perf script' way is to process events and look at a given script for some python function that matches the events to pass each event for processing. This is a python module, i.e. everything is driven from the python script, that merely uses "import perf" or "from perf import". perf script is focused on tracepoints, this binding is focused on profiling as an initial target. More work is needed to make available tracepoint specific variables as event variables accessible via this binding. There is one example of such usage model, in tools/perf/python/twatch.py, a tool to watch "cycles" events together with task (fork, exit) and comm perf events. For now, due to me not being able to grok how python distutils cope with building C extensions outside the sources dir the install target just builds it, I'm using it as: [root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/ [root@emilia linux]# tools/perf/python/twatch.py cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: } cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: } cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: } cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: } cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: } cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: } cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: } cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534} cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls } cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024} The first 8 mmap events in this 8 way machine are a mistery that is still being investigated. More of the tools/perf/util/ APIs will be exposed via this python binding as the need arises. For now the focus is on creating events and processing them, symbol resolution is an obvious next step, with tracepoint variables as a close second step. Cc: Clark Williams <williams@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
return pyevent;
}
end:
perf tools: Initial python binding First clarifying that this kind of binding is not a replacement or an equivalent to the 'perf script' way of using python with perf. The 'perf script' way is to process events and look at a given script for some python function that matches the events to pass each event for processing. This is a python module, i.e. everything is driven from the python script, that merely uses "import perf" or "from perf import". perf script is focused on tracepoints, this binding is focused on profiling as an initial target. More work is needed to make available tracepoint specific variables as event variables accessible via this binding. There is one example of such usage model, in tools/perf/python/twatch.py, a tool to watch "cycles" events together with task (fork, exit) and comm perf events. For now, due to me not being able to grok how python distutils cope with building C extensions outside the sources dir the install target just builds it, I'm using it as: [root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/ [root@emilia linux]# tools/perf/python/twatch.py cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: } cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: } cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: } cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: } cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: } cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: } cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: } cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534} cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls } cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024} The first 8 mmap events in this 8 way machine are a mistery that is still being investigated. More of the tools/perf/util/ APIs will be exposed via this python binding as the need arises. For now the focus is on creating events and processing them, symbol resolution is an obvious next step, with tracepoint variables as a close second step. Cc: Clark Williams <williams@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
Py_INCREF(Py_None);
return Py_None;
}
static PyObject *pyrf_evlist__open(struct pyrf_evlist *pevlist,
PyObject *args, PyObject *kwargs)
{
struct evlist *evlist = &pevlist->evlist;
perf tools: Enable grouping logic for parsed events This patch adds a functionality that allows to create event groups based on the way they are specified on the command line. Adding functionality to the '{}' group syntax introduced in earlier patch. The current '--group/-g' option behaviour remains intact. If you specify it for record/stat/top command, all the specified events become members of a single group with the first event as a group leader. With the new '{}' group syntax you can create group like: # perf record -e '{cycles,faults}' ls resulting in single event group containing 'cycles' and 'faults' events, with cycles event as group leader. All groups are created with regards to threads and cpus. Thus recording an event group within a 2 threads on server with 4 CPUs will create 8 separate groups. Examples (first event in brackets is group leader): # 1 group (cpu-clock,task-clock) perf record --group -e cpu-clock,task-clock ls perf record -e '{cpu-clock,task-clock}' ls # 2 groups (cpu-clock,task-clock) (minor-faults,major-faults) perf record -e '{cpu-clock,task-clock},{minor-faults,major-faults}' ls # 1 group (cpu-clock,task-clock,minor-faults,major-faults) perf record --group -e cpu-clock,task-clock -e minor-faults,major-faults ls perf record -e '{cpu-clock,task-clock,minor-faults,major-faults}' ls # 2 groups (cpu-clock,task-clock) (minor-faults,major-faults) perf record -e '{cpu-clock,task-clock} -e '{minor-faults,major-faults}' \ -e instructions ls # 1 group # (cpu-clock,task-clock,minor-faults,major-faults,instructions) perf record --group -e cpu-clock,task-clock \ -e minor-faults,major-faults -e instructions ls perf record -e '{cpu-clock,task-clock,minor-faults,major-faults,instructions}' ls It's possible to use standard event modifier for a group, which spans over all events in the group and updates each event modifier settings, for example: # perf record -r '{faults:k,cache-references}:p' resulting in ':kp' modifier being used for 'faults' and ':p' modifier being used for 'cache-references' event. Reviewed-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Jiri Olsa <jolsa@redhat.com> Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: Andi Kleen <andi@firstfloor.org> Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ulrich Drepper <drepper@gmail.com> Link: http://lkml.kernel.org/n/tip-ho42u0wcr8mn1otkalqi13qp@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-08-08 12:22:36 +02:00
if (evlist__open(evlist) < 0) {
PyErr_SetFromErrno(PyExc_OSError);
return NULL;
}
Py_INCREF(Py_None);
return Py_None;
}
perf tools: Initial python binding First clarifying that this kind of binding is not a replacement or an equivalent to the 'perf script' way of using python with perf. The 'perf script' way is to process events and look at a given script for some python function that matches the events to pass each event for processing. This is a python module, i.e. everything is driven from the python script, that merely uses "import perf" or "from perf import". perf script is focused on tracepoints, this binding is focused on profiling as an initial target. More work is needed to make available tracepoint specific variables as event variables accessible via this binding. There is one example of such usage model, in tools/perf/python/twatch.py, a tool to watch "cycles" events together with task (fork, exit) and comm perf events. For now, due to me not being able to grok how python distutils cope with building C extensions outside the sources dir the install target just builds it, I'm using it as: [root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/ [root@emilia linux]# tools/perf/python/twatch.py cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: } cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: } cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: } cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: } cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: } cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: } cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: } cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534} cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls } cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024} The first 8 mmap events in this 8 way machine are a mistery that is still being investigated. More of the tools/perf/util/ APIs will be exposed via this python binding as the need arises. For now the focus is on creating events and processing them, symbol resolution is an obvious next step, with tracepoint variables as a close second step. Cc: Clark Williams <williams@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
static PyMethodDef pyrf_evlist__methods[] = {
{
.ml_name = "mmap",
.ml_meth = (PyCFunction)pyrf_evlist__mmap,
.ml_flags = METH_VARARGS | METH_KEYWORDS,
.ml_doc = PyDoc_STR("mmap the file descriptor table.")
},
{
.ml_name = "open",
.ml_meth = (PyCFunction)pyrf_evlist__open,
.ml_flags = METH_VARARGS | METH_KEYWORDS,
.ml_doc = PyDoc_STR("open the file descriptors.")
},
perf tools: Initial python binding First clarifying that this kind of binding is not a replacement or an equivalent to the 'perf script' way of using python with perf. The 'perf script' way is to process events and look at a given script for some python function that matches the events to pass each event for processing. This is a python module, i.e. everything is driven from the python script, that merely uses "import perf" or "from perf import". perf script is focused on tracepoints, this binding is focused on profiling as an initial target. More work is needed to make available tracepoint specific variables as event variables accessible via this binding. There is one example of such usage model, in tools/perf/python/twatch.py, a tool to watch "cycles" events together with task (fork, exit) and comm perf events. For now, due to me not being able to grok how python distutils cope with building C extensions outside the sources dir the install target just builds it, I'm using it as: [root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/ [root@emilia linux]# tools/perf/python/twatch.py cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: } cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: } cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: } cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: } cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: } cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: } cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: } cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534} cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls } cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024} The first 8 mmap events in this 8 way machine are a mistery that is still being investigated. More of the tools/perf/util/ APIs will be exposed via this python binding as the need arises. For now the focus is on creating events and processing them, symbol resolution is an obvious next step, with tracepoint variables as a close second step. Cc: Clark Williams <williams@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
{
.ml_name = "poll",
.ml_meth = (PyCFunction)pyrf_evlist__poll,
.ml_flags = METH_VARARGS | METH_KEYWORDS,
.ml_doc = PyDoc_STR("poll the file descriptor table.")
},
{
.ml_name = "get_pollfd",
.ml_meth = (PyCFunction)pyrf_evlist__get_pollfd,
.ml_flags = METH_VARARGS | METH_KEYWORDS,
.ml_doc = PyDoc_STR("get the poll file descriptor table.")
},
{
.ml_name = "add",
.ml_meth = (PyCFunction)pyrf_evlist__add,
.ml_flags = METH_VARARGS | METH_KEYWORDS,
.ml_doc = PyDoc_STR("adds an event selector to the list.")
},
{
.ml_name = "read_on_cpu",
.ml_meth = (PyCFunction)pyrf_evlist__read_on_cpu,
.ml_flags = METH_VARARGS | METH_KEYWORDS,
.ml_doc = PyDoc_STR("reads an event.")
},
{ .ml_name = NULL, }
perf tools: Initial python binding First clarifying that this kind of binding is not a replacement or an equivalent to the 'perf script' way of using python with perf. The 'perf script' way is to process events and look at a given script for some python function that matches the events to pass each event for processing. This is a python module, i.e. everything is driven from the python script, that merely uses "import perf" or "from perf import". perf script is focused on tracepoints, this binding is focused on profiling as an initial target. More work is needed to make available tracepoint specific variables as event variables accessible via this binding. There is one example of such usage model, in tools/perf/python/twatch.py, a tool to watch "cycles" events together with task (fork, exit) and comm perf events. For now, due to me not being able to grok how python distutils cope with building C extensions outside the sources dir the install target just builds it, I'm using it as: [root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/ [root@emilia linux]# tools/perf/python/twatch.py cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: } cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: } cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: } cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: } cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: } cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: } cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: } cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534} cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls } cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024} The first 8 mmap events in this 8 way machine are a mistery that is still being investigated. More of the tools/perf/util/ APIs will be exposed via this python binding as the need arises. For now the focus is on creating events and processing them, symbol resolution is an obvious next step, with tracepoint variables as a close second step. Cc: Clark Williams <williams@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
};
static Py_ssize_t pyrf_evlist__length(PyObject *obj)
{
struct pyrf_evlist *pevlist = (void *)obj;
return pevlist->evlist.core.nr_entries;
perf tools: Initial python binding First clarifying that this kind of binding is not a replacement or an equivalent to the 'perf script' way of using python with perf. The 'perf script' way is to process events and look at a given script for some python function that matches the events to pass each event for processing. This is a python module, i.e. everything is driven from the python script, that merely uses "import perf" or "from perf import". perf script is focused on tracepoints, this binding is focused on profiling as an initial target. More work is needed to make available tracepoint specific variables as event variables accessible via this binding. There is one example of such usage model, in tools/perf/python/twatch.py, a tool to watch "cycles" events together with task (fork, exit) and comm perf events. For now, due to me not being able to grok how python distutils cope with building C extensions outside the sources dir the install target just builds it, I'm using it as: [root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/ [root@emilia linux]# tools/perf/python/twatch.py cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: } cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: } cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: } cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: } cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: } cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: } cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: } cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534} cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls } cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024} The first 8 mmap events in this 8 way machine are a mistery that is still being investigated. More of the tools/perf/util/ APIs will be exposed via this python binding as the need arises. For now the focus is on creating events and processing them, symbol resolution is an obvious next step, with tracepoint variables as a close second step. Cc: Clark Williams <williams@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
}
static PyObject *pyrf_evlist__item(PyObject *obj, Py_ssize_t i)
{
struct pyrf_evlist *pevlist = (void *)obj;
struct evsel *pos;
perf tools: Initial python binding First clarifying that this kind of binding is not a replacement or an equivalent to the 'perf script' way of using python with perf. The 'perf script' way is to process events and look at a given script for some python function that matches the events to pass each event for processing. This is a python module, i.e. everything is driven from the python script, that merely uses "import perf" or "from perf import". perf script is focused on tracepoints, this binding is focused on profiling as an initial target. More work is needed to make available tracepoint specific variables as event variables accessible via this binding. There is one example of such usage model, in tools/perf/python/twatch.py, a tool to watch "cycles" events together with task (fork, exit) and comm perf events. For now, due to me not being able to grok how python distutils cope with building C extensions outside the sources dir the install target just builds it, I'm using it as: [root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/ [root@emilia linux]# tools/perf/python/twatch.py cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: } cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: } cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: } cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: } cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: } cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: } cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: } cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534} cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls } cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024} The first 8 mmap events in this 8 way machine are a mistery that is still being investigated. More of the tools/perf/util/ APIs will be exposed via this python binding as the need arises. For now the focus is on creating events and processing them, symbol resolution is an obvious next step, with tracepoint variables as a close second step. Cc: Clark Williams <williams@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
if (i >= pevlist->evlist.core.nr_entries)
perf tools: Initial python binding First clarifying that this kind of binding is not a replacement or an equivalent to the 'perf script' way of using python with perf. The 'perf script' way is to process events and look at a given script for some python function that matches the events to pass each event for processing. This is a python module, i.e. everything is driven from the python script, that merely uses "import perf" or "from perf import". perf script is focused on tracepoints, this binding is focused on profiling as an initial target. More work is needed to make available tracepoint specific variables as event variables accessible via this binding. There is one example of such usage model, in tools/perf/python/twatch.py, a tool to watch "cycles" events together with task (fork, exit) and comm perf events. For now, due to me not being able to grok how python distutils cope with building C extensions outside the sources dir the install target just builds it, I'm using it as: [root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/ [root@emilia linux]# tools/perf/python/twatch.py cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: } cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: } cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: } cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: } cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: } cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: } cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: } cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534} cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls } cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024} The first 8 mmap events in this 8 way machine are a mistery that is still being investigated. More of the tools/perf/util/ APIs will be exposed via this python binding as the need arises. For now the focus is on creating events and processing them, symbol resolution is an obvious next step, with tracepoint variables as a close second step. Cc: Clark Williams <williams@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
return NULL;
evlist__for_each_entry(&pevlist->evlist, pos) {
perf tools: Initial python binding First clarifying that this kind of binding is not a replacement or an equivalent to the 'perf script' way of using python with perf. The 'perf script' way is to process events and look at a given script for some python function that matches the events to pass each event for processing. This is a python module, i.e. everything is driven from the python script, that merely uses "import perf" or "from perf import". perf script is focused on tracepoints, this binding is focused on profiling as an initial target. More work is needed to make available tracepoint specific variables as event variables accessible via this binding. There is one example of such usage model, in tools/perf/python/twatch.py, a tool to watch "cycles" events together with task (fork, exit) and comm perf events. For now, due to me not being able to grok how python distutils cope with building C extensions outside the sources dir the install target just builds it, I'm using it as: [root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/ [root@emilia linux]# tools/perf/python/twatch.py cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: } cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: } cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: } cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: } cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: } cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: } cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: } cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534} cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls } cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024} The first 8 mmap events in this 8 way machine are a mistery that is still being investigated. More of the tools/perf/util/ APIs will be exposed via this python binding as the need arises. For now the focus is on creating events and processing them, symbol resolution is an obvious next step, with tracepoint variables as a close second step. Cc: Clark Williams <williams@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
if (i-- == 0)
break;
}
perf tools: Initial python binding First clarifying that this kind of binding is not a replacement or an equivalent to the 'perf script' way of using python with perf. The 'perf script' way is to process events and look at a given script for some python function that matches the events to pass each event for processing. This is a python module, i.e. everything is driven from the python script, that merely uses "import perf" or "from perf import". perf script is focused on tracepoints, this binding is focused on profiling as an initial target. More work is needed to make available tracepoint specific variables as event variables accessible via this binding. There is one example of such usage model, in tools/perf/python/twatch.py, a tool to watch "cycles" events together with task (fork, exit) and comm perf events. For now, due to me not being able to grok how python distutils cope with building C extensions outside the sources dir the install target just builds it, I'm using it as: [root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/ [root@emilia linux]# tools/perf/python/twatch.py cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: } cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: } cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: } cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: } cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: } cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: } cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: } cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534} cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls } cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024} The first 8 mmap events in this 8 way machine are a mistery that is still being investigated. More of the tools/perf/util/ APIs will be exposed via this python binding as the need arises. For now the focus is on creating events and processing them, symbol resolution is an obvious next step, with tracepoint variables as a close second step. Cc: Clark Williams <williams@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
return Py_BuildValue("O", container_of(pos, struct pyrf_evsel, evsel));
}
static PySequenceMethods pyrf_evlist__sequence_methods = {
.sq_length = pyrf_evlist__length,
.sq_item = pyrf_evlist__item,
};
static char pyrf_evlist__doc[] = PyDoc_STR("perf event selector list object.");
static PyTypeObject pyrf_evlist__type = {
PyVarObject_HEAD_INIT(NULL, 0)
.tp_name = "perf.evlist",
.tp_basicsize = sizeof(struct pyrf_evlist),
.tp_dealloc = (destructor)pyrf_evlist__delete,
.tp_flags = Py_TPFLAGS_DEFAULT|Py_TPFLAGS_BASETYPE,
.tp_as_sequence = &pyrf_evlist__sequence_methods,
.tp_doc = pyrf_evlist__doc,
.tp_methods = pyrf_evlist__methods,
.tp_init = (initproc)pyrf_evlist__init,
};
static int pyrf_evlist__setup_types(void)
{
pyrf_evlist__type.tp_new = PyType_GenericNew;
return PyType_Ready(&pyrf_evlist__type);
}
#define PERF_CONST(name) { #name, PERF_##name }
perf tools: Initial python binding First clarifying that this kind of binding is not a replacement or an equivalent to the 'perf script' way of using python with perf. The 'perf script' way is to process events and look at a given script for some python function that matches the events to pass each event for processing. This is a python module, i.e. everything is driven from the python script, that merely uses "import perf" or "from perf import". perf script is focused on tracepoints, this binding is focused on profiling as an initial target. More work is needed to make available tracepoint specific variables as event variables accessible via this binding. There is one example of such usage model, in tools/perf/python/twatch.py, a tool to watch "cycles" events together with task (fork, exit) and comm perf events. For now, due to me not being able to grok how python distutils cope with building C extensions outside the sources dir the install target just builds it, I'm using it as: [root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/ [root@emilia linux]# tools/perf/python/twatch.py cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: } cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: } cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: } cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: } cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: } cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: } cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: } cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534} cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls } cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024} The first 8 mmap events in this 8 way machine are a mistery that is still being investigated. More of the tools/perf/util/ APIs will be exposed via this python binding as the need arises. For now the focus is on creating events and processing them, symbol resolution is an obvious next step, with tracepoint variables as a close second step. Cc: Clark Williams <williams@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
static struct {
const char *name;
int value;
} perf__constants[] = {
PERF_CONST(TYPE_HARDWARE),
PERF_CONST(TYPE_SOFTWARE),
PERF_CONST(TYPE_TRACEPOINT),
PERF_CONST(TYPE_HW_CACHE),
PERF_CONST(TYPE_RAW),
PERF_CONST(TYPE_BREAKPOINT),
PERF_CONST(COUNT_HW_CPU_CYCLES),
PERF_CONST(COUNT_HW_INSTRUCTIONS),
PERF_CONST(COUNT_HW_CACHE_REFERENCES),
PERF_CONST(COUNT_HW_CACHE_MISSES),
PERF_CONST(COUNT_HW_BRANCH_INSTRUCTIONS),
PERF_CONST(COUNT_HW_BRANCH_MISSES),
PERF_CONST(COUNT_HW_BUS_CYCLES),
PERF_CONST(COUNT_HW_CACHE_L1D),
PERF_CONST(COUNT_HW_CACHE_L1I),
PERF_CONST(COUNT_HW_CACHE_LL),
PERF_CONST(COUNT_HW_CACHE_DTLB),
PERF_CONST(COUNT_HW_CACHE_ITLB),
PERF_CONST(COUNT_HW_CACHE_BPU),
PERF_CONST(COUNT_HW_CACHE_OP_READ),
PERF_CONST(COUNT_HW_CACHE_OP_WRITE),
PERF_CONST(COUNT_HW_CACHE_OP_PREFETCH),
PERF_CONST(COUNT_HW_CACHE_RESULT_ACCESS),
PERF_CONST(COUNT_HW_CACHE_RESULT_MISS),
PERF_CONST(COUNT_HW_STALLED_CYCLES_FRONTEND),
PERF_CONST(COUNT_HW_STALLED_CYCLES_BACKEND),
PERF_CONST(COUNT_SW_CPU_CLOCK),
PERF_CONST(COUNT_SW_TASK_CLOCK),
PERF_CONST(COUNT_SW_PAGE_FAULTS),
PERF_CONST(COUNT_SW_CONTEXT_SWITCHES),
PERF_CONST(COUNT_SW_CPU_MIGRATIONS),
PERF_CONST(COUNT_SW_PAGE_FAULTS_MIN),
PERF_CONST(COUNT_SW_PAGE_FAULTS_MAJ),
PERF_CONST(COUNT_SW_ALIGNMENT_FAULTS),
PERF_CONST(COUNT_SW_EMULATION_FAULTS),
PERF_CONST(COUNT_SW_DUMMY),
PERF_CONST(SAMPLE_IP),
PERF_CONST(SAMPLE_TID),
PERF_CONST(SAMPLE_TIME),
PERF_CONST(SAMPLE_ADDR),
PERF_CONST(SAMPLE_READ),
PERF_CONST(SAMPLE_CALLCHAIN),
PERF_CONST(SAMPLE_ID),
PERF_CONST(SAMPLE_CPU),
PERF_CONST(SAMPLE_PERIOD),
PERF_CONST(SAMPLE_STREAM_ID),
PERF_CONST(SAMPLE_RAW),
PERF_CONST(FORMAT_TOTAL_TIME_ENABLED),
PERF_CONST(FORMAT_TOTAL_TIME_RUNNING),
PERF_CONST(FORMAT_ID),
PERF_CONST(FORMAT_GROUP),
PERF_CONST(RECORD_MMAP),
PERF_CONST(RECORD_LOST),
PERF_CONST(RECORD_COMM),
PERF_CONST(RECORD_EXIT),
PERF_CONST(RECORD_THROTTLE),
PERF_CONST(RECORD_UNTHROTTLE),
PERF_CONST(RECORD_FORK),
PERF_CONST(RECORD_READ),
PERF_CONST(RECORD_SAMPLE),
PERF_CONST(RECORD_MMAP2),
PERF_CONST(RECORD_AUX),
PERF_CONST(RECORD_ITRACE_START),
PERF_CONST(RECORD_LOST_SAMPLES),
PERF_CONST(RECORD_SWITCH),
PERF_CONST(RECORD_SWITCH_CPU_WIDE),
perf python: Support the PERF_RECORD_SWITCH event To test it check tools/perf/python/twatch.py, after following the instructions there to enable context_switch, output looks like: [root@zoo linux]# tools/perf/python/twatch.py cpu: 1, pid: 31463, tid: 31463 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31463, switch_out: 0 } cpu: 2, pid: 31463, tid: 31496 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31496, switch_out: 0 } cpu: 2, pid: 31463, tid: 31496 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31496, switch_out: 1 } cpu: 3, pid: 31463, tid: 31527 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31527, switch_out: 0 } cpu: 1, pid: 31463, tid: 31463 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31463, switch_out: 1 } cpu: 3, pid: 31463, tid: 31527 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31527, switch_out: 1 } cpu: 1, pid: 31463, tid: 31463 { type: context_switch, next_prev_pid: 31463, next_prev_tid: 31463, switch_out: 0 } ^CTraceback (most recent call last): File "tools/perf/python/twatch.py", line 67, in <module> main(context_switch = 1, thread = 31463) File "tools/perf/python/twatch.py", line 40, in main evlist.poll(timeout = -1) KeyboardInterrupt [root@zoo linux]# Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Guy Streeter <streeter@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-1ukistmpamc5z717k80ctcp2@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-10-06 17:46:46 -03:00
PERF_CONST(RECORD_MISC_SWITCH_OUT),
{ .name = NULL, },
perf tools: Initial python binding First clarifying that this kind of binding is not a replacement or an equivalent to the 'perf script' way of using python with perf. The 'perf script' way is to process events and look at a given script for some python function that matches the events to pass each event for processing. This is a python module, i.e. everything is driven from the python script, that merely uses "import perf" or "from perf import". perf script is focused on tracepoints, this binding is focused on profiling as an initial target. More work is needed to make available tracepoint specific variables as event variables accessible via this binding. There is one example of such usage model, in tools/perf/python/twatch.py, a tool to watch "cycles" events together with task (fork, exit) and comm perf events. For now, due to me not being able to grok how python distutils cope with building C extensions outside the sources dir the install target just builds it, I'm using it as: [root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/ [root@emilia linux]# tools/perf/python/twatch.py cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: } cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: } cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: } cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: } cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: } cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: } cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: } cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534} cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls } cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024} The first 8 mmap events in this 8 way machine are a mistery that is still being investigated. More of the tools/perf/util/ APIs will be exposed via this python binding as the need arises. For now the focus is on creating events and processing them, symbol resolution is an obvious next step, with tracepoint variables as a close second step. Cc: Clark Williams <williams@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
};
static PyObject *pyrf__tracepoint(struct pyrf_evsel *pevsel,
PyObject *args, PyObject *kwargs)
{
perf build: Use libtraceevent from the system Remove the LIBTRACEEVENT_DYNAMIC and LIBTRACEFS_DYNAMIC make command line variables. If libtraceevent isn't installed or NO_LIBTRACEEVENT=1 is passed to the build, don't compile in libtraceevent and libtracefs support. This also disables CONFIG_TRACE that controls "perf trace". CONFIG_LIBTRACEEVENT is used to control enablement in Build/Makefiles, HAVE_LIBTRACEEVENT is used in C code. Without HAVE_LIBTRACEEVENT tracepoints are disabled and as such the commands kmem, kwork, lock, sched and timechart are removed. The majority of commands continue to work including "perf test". Committer notes: Fixed up a tools/perf/util/Build reject and added: #include <traceevent/event-parse.h> to tools/perf/util/scripting-engines/trace-event-perl.c. Committer testing: $ rpm -qi libtraceevent-devel Name : libtraceevent-devel Version : 1.5.3 Release : 2.fc36 Architecture: x86_64 Install Date: Mon 25 Jul 2022 03:20:19 PM -03 Group : Unspecified Size : 27728 License : LGPLv2+ and GPLv2+ Signature : RSA/SHA256, Fri 15 Apr 2022 02:11:58 PM -03, Key ID 999f7cbf38ab71f4 Source RPM : libtraceevent-1.5.3-2.fc36.src.rpm Build Date : Fri 15 Apr 2022 10:57:01 AM -03 Build Host : buildvm-x86-05.iad2.fedoraproject.org Packager : Fedora Project Vendor : Fedora Project URL : https://git.kernel.org/pub/scm/libs/libtrace/libtraceevent.git/ Bug URL : https://bugz.fedoraproject.org/libtraceevent Summary : Development headers of libtraceevent Description : Development headers of libtraceevent-libs $ Default build: $ ldd ~/bin/perf | grep tracee libtraceevent.so.1 => /lib64/libtraceevent.so.1 (0x00007f1dcaf8f000) $ # perf trace -e sched:* --max-events 10 0.000 migration/0/17 sched:sched_migrate_task(comm: "", pid: 1603763 (perf), prio: 120, dest_cpu: 1) 0.005 migration/0/17 sched:sched_wake_idle_without_ipi(cpu: 1) 0.011 migration/0/17 sched:sched_switch(prev_comm: "", prev_pid: 17 (migration/0), prev_state: 1, next_comm: "", next_prio: 120) 1.173 :0/0 sched:sched_wakeup(comm: "", pid: 3138 (gnome-terminal-), prio: 120) 1.180 :0/0 sched:sched_switch(prev_comm: "", prev_prio: 120, next_comm: "", next_pid: 3138 (gnome-terminal-), next_prio: 120) 0.156 migration/1/21 sched:sched_migrate_task(comm: "", pid: 1603763 (perf), prio: 120, orig_cpu: 1, dest_cpu: 2) 0.160 migration/1/21 sched:sched_wake_idle_without_ipi(cpu: 2) 0.166 migration/1/21 sched:sched_switch(prev_comm: "", prev_pid: 21 (migration/1), prev_state: 1, next_comm: "", next_prio: 120) 1.183 :0/0 sched:sched_wakeup(comm: "", pid: 1602985 (kworker/u16:0-f), prio: 120, target_cpu: 1) 1.186 :0/0 sched:sched_switch(prev_comm: "", prev_prio: 120, next_comm: "", next_pid: 1602985 (kworker/u16:0-f), next_prio: 120) # Had to tweak tools/perf/util/setup.py to make sure the python binding shared object links with libtraceevent if -DHAVE_LIBTRACEEVENT is present in CFLAGS. Building with NO_LIBTRACEEVENT=1 uncovered some more build failures: - Make building of data-convert-bt.c to CONFIG_LIBTRACEEVENT=y - perf-$(CONFIG_LIBTRACEEVENT) += scripts/ - bpf_kwork.o needs also to be dependent on CONFIG_LIBTRACEEVENT=y - The python binding needed some fixups and util/trace-event.c can't be built and linked with the python binding shared object, so remove it in tools/perf/util/setup.py and exclude it from the list of dependencies in the python/perf.so Makefile.perf target. Building without libtraceevent-devel installed uncovered more build failures: - The python binding tools/perf/util/python.c was assuming that traceevent/parse-events.h was always available, which was the case when we defaulted to using the in-kernel tools/lib/traceevent/ files, now we need to enclose it under ifdef HAVE_LIBTRACEEVENT, just like the other parts of it that deal with tracepoints. - We have to ifdef the rules in the Build files with CONFIG_LIBTRACEEVENT=y to build builtin-trace.c and tools/perf/trace/beauty/ as we only ifdef setting CONFIG_TRACE=y when setting NO_LIBTRACEEVENT=1 in the make command line, not when we don't detect libtraceevent-devel installed in the system. Simplification here to avoid these two ways of disabling builtin-trace.c and not having CONFIG_TRACE=y when libtraceevent-devel isn't installed is the clean way. From Athira: <quote> tools/perf/arch/powerpc/util/Build -perf-y += kvm-stat.o +perf-$(CONFIG_LIBTRACEEVENT) += kvm-stat.o </quote> Then, ditto for arm64 and s390, detected by container cross build tests. - s/390 uses test__checkevent_tracepoint() that is now only available if HAVE_LIBTRACEEVENT is defined, enclose the callsite with ifder HAVE_LIBTRACEEVENT. Also from Athira: <quote> With this change, I could successfully compile in these environment: - Without libtraceevent-devel installed - With libtraceevent-devel installed - With “make NO_LIBTRACEEVENT=1” </quote> Then, finally rename CONFIG_TRACEEVENT to CONFIG_LIBTRACEEVENT for consistency with other libraries detected in tools/perf/. Signed-off-by: Ian Rogers <irogers@google.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Tested-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: bpf@vger.kernel.org Link: http://lore.kernel.org/lkml/20221205225940.3079667-3-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-12-05 14:59:39 -08:00
#ifndef HAVE_LIBTRACEEVENT
return NULL;
#else
struct tep_event *tp_format;
static char *kwlist[] = { "sys", "name", NULL };
char *sys = NULL;
char *name = NULL;
if (!PyArg_ParseTupleAndKeywords(args, kwargs, "|ss", kwlist,
&sys, &name))
return NULL;
tp_format = trace_event__tp_format(sys, name);
if (IS_ERR(tp_format))
perf tools: Add Python 3 support Added Python 3 support while keeping Python 2.7 compatibility. Committer notes: This doesn't make it to auto detect python 3, one has to explicitely ask it to build with python 3 devel files, here are the instructions provided by Jaroslav: --- $ cp -a tools/perf tools/python3-perf $ make V=1 prefix=/usr -C tools/perf PYTHON=/usr/bin/python2 all $ make V=1 prefix=/usr -C tools/python3-perf PYTHON=/usr/bin/python3 all $ make V=1 prefix=/usr -C tools/python3-perf PYTHON=/usr/bin/python3 DESTDIR=%{buildroot} install-python_ext $ make V=1 prefix=/usr -C tools/perf PYTHON=/usr/bin/python2 DESTDIR=%{buildroot} install-python_ext --- We need to make this automatic, just like the existing tests for checking if the python2 devel files are in place, allowing the build with python3 if available, fallbacking to python2 and then just disabling it if none are available. So, using the PYTHON variable to build it using O= we get: Before this patch: $ rpm -q python3 python3-devel python3-3.6.4-7.fc27.x86_64 python3-devel-3.6.4-7.fc27.x86_64 $ rm -rf /tmp/build/perf/ ; mkdir -p /tmp/build/perf ; make O=/tmp/build/perf PYTHON=/usr/bin/python3 -C tools/perf install-bin make: Entering directory '/home/acme/git/linux/tools/perf' <SNIP> Makefile.config:670: Python 3 is not yet supported; please set Makefile.config:671: PYTHON and/or PYTHON_CONFIG appropriately. Makefile.config:672: If you also have Python 2 installed, then Makefile.config:673: try something like: Makefile.config:674: Makefile.config:675: make PYTHON=python2 Makefile.config:676: Makefile.config:677: Otherwise, disable Python support entirely: Makefile.config:678: Makefile.config:679: make NO_LIBPYTHON=1 Makefile.config:680: Makefile.config:681: *** . Stop. make[1]: *** [Makefile.perf:212: sub-make] Error 2 make: *** [Makefile:110: install-bin] Error 2 make: Leaving directory '/home/acme/git/linux/tools/perf' $ After: $ make O=/tmp/build/perf PYTHON=python3 -C tools/perf install-bin $ ldd ~/bin/perf | grep python libpython3.6m.so.1.0 => /lib64/libpython3.6m.so.1.0 (0x00007f58a31e8000) $ rpm -qf /lib64/libpython3.6m.so.1.0 python3-libs-3.6.4-7.fc27.x86_64 $ Now verify that when using the binding the right ELF file is loaded, using perf trace: $ perf trace -e open* perf test python 0.051 ( 0.016 ms): perf/3927 openat(dfd: CWD, filename: /etc/ld.so.cache, flags: CLOEXEC ) = 3 <SNIP> 18: 'import perf' in python : 8.849 ( 0.013 ms): sh/3929 openat(dfd: CWD, filename: /etc/ld.so.cache, flags: CLOEXEC ) = 3 <SNIP> 25.572 ( 0.008 ms): python3/3931 openat(dfd: CWD, filename: /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so, flags: CLOEXEC) = 3 <SNIP> Ok <SNIP> $ And using tools/perf/python/twatch.py, to show PERF_RECORD_ metaevents: $ python3 tools/perf/python/twatch.py cpu: 3, pid: 16060, tid: 16060 { type: fork, pid: 5207, ppid: 16060, tid: 5207, ptid: 16060, time: 10798513015459} cpu: 3, pid: 16060, tid: 16060 { type: fork, pid: 5208, ppid: 16060, tid: 5208, ptid: 16060, time: 10798513562503} cpu: 0, pid: 5208, tid: 5208 { type: comm, pid: 5208, tid: 5208, comm: grep } cpu: 2, pid: 5207, tid: 5207 { type: comm, pid: 5207, tid: 5207, comm: ps } cpu: 2, pid: 5207, tid: 5207 { type: exit, pid: 5207, ppid: 5207, tid: 5207, ptid: 5207, time: 10798551337484} cpu: 3, pid: 5208, tid: 5208 { type: exit, pid: 5208, ppid: 5208, tid: 5208, ptid: 5208, time: 10798551292153} cpu: 3, pid: 601, tid: 601 { type: fork, pid: 5209, ppid: 601, tid: 5209, ptid: 601, time: 10801779977324} ^CTraceback (most recent call last): File "tools/perf/python/twatch.py", line 68, in <module> main() File "tools/perf/python/twatch.py", line 40, in main evlist.poll(timeout = -1) KeyboardInterrupt $ # ps ax|grep twatch 5197 pts/8 S+ 0:00 python3 tools/perf/python/twatch.py # ls -la /proc/5197/smaps -r--r--r--. 1 acme acme 0 Feb 19 13:14 /proc/5197/smaps # grep python /proc/5197/smaps 558111307000-558111309000 r-xp 00000000 fd:00 3151710 /usr/bin/python3.6 558111508000-558111509000 r--p 00001000 fd:00 3151710 /usr/bin/python3.6 558111509000-55811150a000 rw-p 00002000 fd:00 3151710 /usr/bin/python3.6 7ffad6fc1000-7ffad7008000 r-xp 00000000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so 7ffad7008000-7ffad7207000 ---p 00047000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so 7ffad7207000-7ffad7208000 r--p 00046000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so 7ffad7208000-7ffad7215000 rw-p 00047000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so 7ffadea77000-7ffaded3d000 r-xp 00000000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0 7ffaded3d000-7ffadef3c000 ---p 002c6000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0 7ffadef3c000-7ffadef42000 r--p 002c5000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0 7ffadef42000-7ffadefa5000 rw-p 002cb000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0 # And with this patch, but building normally, without specifying the PYTHON=python3 part, which will make it use python2 if its devel files are available, like in this test: $ make O=/tmp/build/perf -C tools/perf install-bin $ ldd ~/bin/perf | grep python libpython2.7.so.1.0 => /lib64/libpython2.7.so.1.0 (0x00007f6a44410000) $ ldd /tmp/build/perf/python_ext_build/lib/perf.so | grep python libpython2.7.so.1.0 => /lib64/libpython2.7.so.1.0 (0x00007fed28a2c000) $ [acme@jouet perf]$ tools/perf/python/twatch.py cpu: 0, pid: 2817, tid: 2817 { type: fork, pid: 2817, ppid: 2817, tid: 8910, ptid: 2817, time: 11126454335306} cpu: 0, pid: 2817, tid: 2817 { type: comm, pid: 2817, tid: 8910, comm: worker } $ ps ax | grep twatch.py 8909 pts/8 S+ 0:00 /usr/bin/python tools/perf/python/twatch.py $ grep python /proc/8909/smaps 5579de658000-5579de659000 r-xp 00000000 fd:00 3156044 /usr/bin/python2.7 5579de858000-5579de859000 r--p 00000000 fd:00 3156044 /usr/bin/python2.7 5579de859000-5579de85a000 rw-p 00001000 fd:00 3156044 /usr/bin/python2.7 7f0de01f7000-7f0de023e000 r-xp 00000000 00:2d 230695 /tmp/build/perf/python/perf.so 7f0de023e000-7f0de043d000 ---p 00047000 00:2d 230695 /tmp/build/perf/python/perf.so 7f0de043d000-7f0de043e000 r--p 00046000 00:2d 230695 /tmp/build/perf/python/perf.so 7f0de043e000-7f0de044b000 rw-p 00047000 00:2d 230695 /tmp/build/perf/python/perf.so 7f0de6f0f000-7f0de6f13000 r-xp 00000000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so 7f0de6f13000-7f0de7113000 ---p 00004000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so 7f0de7113000-7f0de7114000 r--p 00004000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so 7f0de7114000-7f0de7115000 rw-p 00005000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so 7f0de7e73000-7f0de8052000 r-xp 00000000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0 7f0de8052000-7f0de8251000 ---p 001df000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0 7f0de8251000-7f0de8255000 r--p 001de000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0 7f0de8255000-7f0de8291000 rw-p 001e2000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0 $ Signed-off-by: Jaroslav Škarvada <jskarvad@redhat.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> LPU-Reference: 20180119205641.24242-1-jskarvad@redhat.com Link: https://lkml.kernel.org/n/tip-8d7dt9kqp83vsz25hagug8fu@git.kernel.org [ Removed explicit check for python version, allowing it to really build with python3 ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-01-19 21:56:41 +01:00
return _PyLong_FromLong(-1);
perf tools: Add Python 3 support Added Python 3 support while keeping Python 2.7 compatibility. Committer notes: This doesn't make it to auto detect python 3, one has to explicitely ask it to build with python 3 devel files, here are the instructions provided by Jaroslav: --- $ cp -a tools/perf tools/python3-perf $ make V=1 prefix=/usr -C tools/perf PYTHON=/usr/bin/python2 all $ make V=1 prefix=/usr -C tools/python3-perf PYTHON=/usr/bin/python3 all $ make V=1 prefix=/usr -C tools/python3-perf PYTHON=/usr/bin/python3 DESTDIR=%{buildroot} install-python_ext $ make V=1 prefix=/usr -C tools/perf PYTHON=/usr/bin/python2 DESTDIR=%{buildroot} install-python_ext --- We need to make this automatic, just like the existing tests for checking if the python2 devel files are in place, allowing the build with python3 if available, fallbacking to python2 and then just disabling it if none are available. So, using the PYTHON variable to build it using O= we get: Before this patch: $ rpm -q python3 python3-devel python3-3.6.4-7.fc27.x86_64 python3-devel-3.6.4-7.fc27.x86_64 $ rm -rf /tmp/build/perf/ ; mkdir -p /tmp/build/perf ; make O=/tmp/build/perf PYTHON=/usr/bin/python3 -C tools/perf install-bin make: Entering directory '/home/acme/git/linux/tools/perf' <SNIP> Makefile.config:670: Python 3 is not yet supported; please set Makefile.config:671: PYTHON and/or PYTHON_CONFIG appropriately. Makefile.config:672: If you also have Python 2 installed, then Makefile.config:673: try something like: Makefile.config:674: Makefile.config:675: make PYTHON=python2 Makefile.config:676: Makefile.config:677: Otherwise, disable Python support entirely: Makefile.config:678: Makefile.config:679: make NO_LIBPYTHON=1 Makefile.config:680: Makefile.config:681: *** . Stop. make[1]: *** [Makefile.perf:212: sub-make] Error 2 make: *** [Makefile:110: install-bin] Error 2 make: Leaving directory '/home/acme/git/linux/tools/perf' $ After: $ make O=/tmp/build/perf PYTHON=python3 -C tools/perf install-bin $ ldd ~/bin/perf | grep python libpython3.6m.so.1.0 => /lib64/libpython3.6m.so.1.0 (0x00007f58a31e8000) $ rpm -qf /lib64/libpython3.6m.so.1.0 python3-libs-3.6.4-7.fc27.x86_64 $ Now verify that when using the binding the right ELF file is loaded, using perf trace: $ perf trace -e open* perf test python 0.051 ( 0.016 ms): perf/3927 openat(dfd: CWD, filename: /etc/ld.so.cache, flags: CLOEXEC ) = 3 <SNIP> 18: 'import perf' in python : 8.849 ( 0.013 ms): sh/3929 openat(dfd: CWD, filename: /etc/ld.so.cache, flags: CLOEXEC ) = 3 <SNIP> 25.572 ( 0.008 ms): python3/3931 openat(dfd: CWD, filename: /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so, flags: CLOEXEC) = 3 <SNIP> Ok <SNIP> $ And using tools/perf/python/twatch.py, to show PERF_RECORD_ metaevents: $ python3 tools/perf/python/twatch.py cpu: 3, pid: 16060, tid: 16060 { type: fork, pid: 5207, ppid: 16060, tid: 5207, ptid: 16060, time: 10798513015459} cpu: 3, pid: 16060, tid: 16060 { type: fork, pid: 5208, ppid: 16060, tid: 5208, ptid: 16060, time: 10798513562503} cpu: 0, pid: 5208, tid: 5208 { type: comm, pid: 5208, tid: 5208, comm: grep } cpu: 2, pid: 5207, tid: 5207 { type: comm, pid: 5207, tid: 5207, comm: ps } cpu: 2, pid: 5207, tid: 5207 { type: exit, pid: 5207, ppid: 5207, tid: 5207, ptid: 5207, time: 10798551337484} cpu: 3, pid: 5208, tid: 5208 { type: exit, pid: 5208, ppid: 5208, tid: 5208, ptid: 5208, time: 10798551292153} cpu: 3, pid: 601, tid: 601 { type: fork, pid: 5209, ppid: 601, tid: 5209, ptid: 601, time: 10801779977324} ^CTraceback (most recent call last): File "tools/perf/python/twatch.py", line 68, in <module> main() File "tools/perf/python/twatch.py", line 40, in main evlist.poll(timeout = -1) KeyboardInterrupt $ # ps ax|grep twatch 5197 pts/8 S+ 0:00 python3 tools/perf/python/twatch.py # ls -la /proc/5197/smaps -r--r--r--. 1 acme acme 0 Feb 19 13:14 /proc/5197/smaps # grep python /proc/5197/smaps 558111307000-558111309000 r-xp 00000000 fd:00 3151710 /usr/bin/python3.6 558111508000-558111509000 r--p 00001000 fd:00 3151710 /usr/bin/python3.6 558111509000-55811150a000 rw-p 00002000 fd:00 3151710 /usr/bin/python3.6 7ffad6fc1000-7ffad7008000 r-xp 00000000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so 7ffad7008000-7ffad7207000 ---p 00047000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so 7ffad7207000-7ffad7208000 r--p 00046000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so 7ffad7208000-7ffad7215000 rw-p 00047000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so 7ffadea77000-7ffaded3d000 r-xp 00000000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0 7ffaded3d000-7ffadef3c000 ---p 002c6000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0 7ffadef3c000-7ffadef42000 r--p 002c5000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0 7ffadef42000-7ffadefa5000 rw-p 002cb000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0 # And with this patch, but building normally, without specifying the PYTHON=python3 part, which will make it use python2 if its devel files are available, like in this test: $ make O=/tmp/build/perf -C tools/perf install-bin $ ldd ~/bin/perf | grep python libpython2.7.so.1.0 => /lib64/libpython2.7.so.1.0 (0x00007f6a44410000) $ ldd /tmp/build/perf/python_ext_build/lib/perf.so | grep python libpython2.7.so.1.0 => /lib64/libpython2.7.so.1.0 (0x00007fed28a2c000) $ [acme@jouet perf]$ tools/perf/python/twatch.py cpu: 0, pid: 2817, tid: 2817 { type: fork, pid: 2817, ppid: 2817, tid: 8910, ptid: 2817, time: 11126454335306} cpu: 0, pid: 2817, tid: 2817 { type: comm, pid: 2817, tid: 8910, comm: worker } $ ps ax | grep twatch.py 8909 pts/8 S+ 0:00 /usr/bin/python tools/perf/python/twatch.py $ grep python /proc/8909/smaps 5579de658000-5579de659000 r-xp 00000000 fd:00 3156044 /usr/bin/python2.7 5579de858000-5579de859000 r--p 00000000 fd:00 3156044 /usr/bin/python2.7 5579de859000-5579de85a000 rw-p 00001000 fd:00 3156044 /usr/bin/python2.7 7f0de01f7000-7f0de023e000 r-xp 00000000 00:2d 230695 /tmp/build/perf/python/perf.so 7f0de023e000-7f0de043d000 ---p 00047000 00:2d 230695 /tmp/build/perf/python/perf.so 7f0de043d000-7f0de043e000 r--p 00046000 00:2d 230695 /tmp/build/perf/python/perf.so 7f0de043e000-7f0de044b000 rw-p 00047000 00:2d 230695 /tmp/build/perf/python/perf.so 7f0de6f0f000-7f0de6f13000 r-xp 00000000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so 7f0de6f13000-7f0de7113000 ---p 00004000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so 7f0de7113000-7f0de7114000 r--p 00004000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so 7f0de7114000-7f0de7115000 rw-p 00005000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so 7f0de7e73000-7f0de8052000 r-xp 00000000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0 7f0de8052000-7f0de8251000 ---p 001df000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0 7f0de8251000-7f0de8255000 r--p 001de000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0 7f0de8255000-7f0de8291000 rw-p 001e2000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0 $ Signed-off-by: Jaroslav Škarvada <jskarvad@redhat.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> LPU-Reference: 20180119205641.24242-1-jskarvad@redhat.com Link: https://lkml.kernel.org/n/tip-8d7dt9kqp83vsz25hagug8fu@git.kernel.org [ Removed explicit check for python version, allowing it to really build with python3 ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-01-19 21:56:41 +01:00
return _PyLong_FromLong(tp_format->id);
perf build: Use libtraceevent from the system Remove the LIBTRACEEVENT_DYNAMIC and LIBTRACEFS_DYNAMIC make command line variables. If libtraceevent isn't installed or NO_LIBTRACEEVENT=1 is passed to the build, don't compile in libtraceevent and libtracefs support. This also disables CONFIG_TRACE that controls "perf trace". CONFIG_LIBTRACEEVENT is used to control enablement in Build/Makefiles, HAVE_LIBTRACEEVENT is used in C code. Without HAVE_LIBTRACEEVENT tracepoints are disabled and as such the commands kmem, kwork, lock, sched and timechart are removed. The majority of commands continue to work including "perf test". Committer notes: Fixed up a tools/perf/util/Build reject and added: #include <traceevent/event-parse.h> to tools/perf/util/scripting-engines/trace-event-perl.c. Committer testing: $ rpm -qi libtraceevent-devel Name : libtraceevent-devel Version : 1.5.3 Release : 2.fc36 Architecture: x86_64 Install Date: Mon 25 Jul 2022 03:20:19 PM -03 Group : Unspecified Size : 27728 License : LGPLv2+ and GPLv2+ Signature : RSA/SHA256, Fri 15 Apr 2022 02:11:58 PM -03, Key ID 999f7cbf38ab71f4 Source RPM : libtraceevent-1.5.3-2.fc36.src.rpm Build Date : Fri 15 Apr 2022 10:57:01 AM -03 Build Host : buildvm-x86-05.iad2.fedoraproject.org Packager : Fedora Project Vendor : Fedora Project URL : https://git.kernel.org/pub/scm/libs/libtrace/libtraceevent.git/ Bug URL : https://bugz.fedoraproject.org/libtraceevent Summary : Development headers of libtraceevent Description : Development headers of libtraceevent-libs $ Default build: $ ldd ~/bin/perf | grep tracee libtraceevent.so.1 => /lib64/libtraceevent.so.1 (0x00007f1dcaf8f000) $ # perf trace -e sched:* --max-events 10 0.000 migration/0/17 sched:sched_migrate_task(comm: "", pid: 1603763 (perf), prio: 120, dest_cpu: 1) 0.005 migration/0/17 sched:sched_wake_idle_without_ipi(cpu: 1) 0.011 migration/0/17 sched:sched_switch(prev_comm: "", prev_pid: 17 (migration/0), prev_state: 1, next_comm: "", next_prio: 120) 1.173 :0/0 sched:sched_wakeup(comm: "", pid: 3138 (gnome-terminal-), prio: 120) 1.180 :0/0 sched:sched_switch(prev_comm: "", prev_prio: 120, next_comm: "", next_pid: 3138 (gnome-terminal-), next_prio: 120) 0.156 migration/1/21 sched:sched_migrate_task(comm: "", pid: 1603763 (perf), prio: 120, orig_cpu: 1, dest_cpu: 2) 0.160 migration/1/21 sched:sched_wake_idle_without_ipi(cpu: 2) 0.166 migration/1/21 sched:sched_switch(prev_comm: "", prev_pid: 21 (migration/1), prev_state: 1, next_comm: "", next_prio: 120) 1.183 :0/0 sched:sched_wakeup(comm: "", pid: 1602985 (kworker/u16:0-f), prio: 120, target_cpu: 1) 1.186 :0/0 sched:sched_switch(prev_comm: "", prev_prio: 120, next_comm: "", next_pid: 1602985 (kworker/u16:0-f), next_prio: 120) # Had to tweak tools/perf/util/setup.py to make sure the python binding shared object links with libtraceevent if -DHAVE_LIBTRACEEVENT is present in CFLAGS. Building with NO_LIBTRACEEVENT=1 uncovered some more build failures: - Make building of data-convert-bt.c to CONFIG_LIBTRACEEVENT=y - perf-$(CONFIG_LIBTRACEEVENT) += scripts/ - bpf_kwork.o needs also to be dependent on CONFIG_LIBTRACEEVENT=y - The python binding needed some fixups and util/trace-event.c can't be built and linked with the python binding shared object, so remove it in tools/perf/util/setup.py and exclude it from the list of dependencies in the python/perf.so Makefile.perf target. Building without libtraceevent-devel installed uncovered more build failures: - The python binding tools/perf/util/python.c was assuming that traceevent/parse-events.h was always available, which was the case when we defaulted to using the in-kernel tools/lib/traceevent/ files, now we need to enclose it under ifdef HAVE_LIBTRACEEVENT, just like the other parts of it that deal with tracepoints. - We have to ifdef the rules in the Build files with CONFIG_LIBTRACEEVENT=y to build builtin-trace.c and tools/perf/trace/beauty/ as we only ifdef setting CONFIG_TRACE=y when setting NO_LIBTRACEEVENT=1 in the make command line, not when we don't detect libtraceevent-devel installed in the system. Simplification here to avoid these two ways of disabling builtin-trace.c and not having CONFIG_TRACE=y when libtraceevent-devel isn't installed is the clean way. From Athira: <quote> tools/perf/arch/powerpc/util/Build -perf-y += kvm-stat.o +perf-$(CONFIG_LIBTRACEEVENT) += kvm-stat.o </quote> Then, ditto for arm64 and s390, detected by container cross build tests. - s/390 uses test__checkevent_tracepoint() that is now only available if HAVE_LIBTRACEEVENT is defined, enclose the callsite with ifder HAVE_LIBTRACEEVENT. Also from Athira: <quote> With this change, I could successfully compile in these environment: - Without libtraceevent-devel installed - With libtraceevent-devel installed - With “make NO_LIBTRACEEVENT=1” </quote> Then, finally rename CONFIG_TRACEEVENT to CONFIG_LIBTRACEEVENT for consistency with other libraries detected in tools/perf/. Signed-off-by: Ian Rogers <irogers@google.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Tested-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: bpf@vger.kernel.org Link: http://lore.kernel.org/lkml/20221205225940.3079667-3-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-12-05 14:59:39 -08:00
#endif // HAVE_LIBTRACEEVENT
}
perf tools: Initial python binding First clarifying that this kind of binding is not a replacement or an equivalent to the 'perf script' way of using python with perf. The 'perf script' way is to process events and look at a given script for some python function that matches the events to pass each event for processing. This is a python module, i.e. everything is driven from the python script, that merely uses "import perf" or "from perf import". perf script is focused on tracepoints, this binding is focused on profiling as an initial target. More work is needed to make available tracepoint specific variables as event variables accessible via this binding. There is one example of such usage model, in tools/perf/python/twatch.py, a tool to watch "cycles" events together with task (fork, exit) and comm perf events. For now, due to me not being able to grok how python distutils cope with building C extensions outside the sources dir the install target just builds it, I'm using it as: [root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/ [root@emilia linux]# tools/perf/python/twatch.py cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: } cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: } cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: } cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: } cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: } cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: } cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: } cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534} cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls } cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024} The first 8 mmap events in this 8 way machine are a mistery that is still being investigated. More of the tools/perf/util/ APIs will be exposed via this python binding as the need arises. For now the focus is on creating events and processing them, symbol resolution is an obvious next step, with tracepoint variables as a close second step. Cc: Clark Williams <williams@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
static PyMethodDef perf__methods[] = {
{
.ml_name = "tracepoint",
.ml_meth = (PyCFunction) pyrf__tracepoint,
.ml_flags = METH_VARARGS | METH_KEYWORDS,
.ml_doc = PyDoc_STR("Get tracepoint config.")
},
{ .ml_name = NULL, }
perf tools: Initial python binding First clarifying that this kind of binding is not a replacement or an equivalent to the 'perf script' way of using python with perf. The 'perf script' way is to process events and look at a given script for some python function that matches the events to pass each event for processing. This is a python module, i.e. everything is driven from the python script, that merely uses "import perf" or "from perf import". perf script is focused on tracepoints, this binding is focused on profiling as an initial target. More work is needed to make available tracepoint specific variables as event variables accessible via this binding. There is one example of such usage model, in tools/perf/python/twatch.py, a tool to watch "cycles" events together with task (fork, exit) and comm perf events. For now, due to me not being able to grok how python distutils cope with building C extensions outside the sources dir the install target just builds it, I'm using it as: [root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/ [root@emilia linux]# tools/perf/python/twatch.py cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: } cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: } cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: } cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: } cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: } cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: } cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: } cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534} cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls } cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024} The first 8 mmap events in this 8 way machine are a mistery that is still being investigated. More of the tools/perf/util/ APIs will be exposed via this python binding as the need arises. For now the focus is on creating events and processing them, symbol resolution is an obvious next step, with tracepoint variables as a close second step. Cc: Clark Williams <williams@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
};
perf tools: Add Python 3 support Added Python 3 support while keeping Python 2.7 compatibility. Committer notes: This doesn't make it to auto detect python 3, one has to explicitely ask it to build with python 3 devel files, here are the instructions provided by Jaroslav: --- $ cp -a tools/perf tools/python3-perf $ make V=1 prefix=/usr -C tools/perf PYTHON=/usr/bin/python2 all $ make V=1 prefix=/usr -C tools/python3-perf PYTHON=/usr/bin/python3 all $ make V=1 prefix=/usr -C tools/python3-perf PYTHON=/usr/bin/python3 DESTDIR=%{buildroot} install-python_ext $ make V=1 prefix=/usr -C tools/perf PYTHON=/usr/bin/python2 DESTDIR=%{buildroot} install-python_ext --- We need to make this automatic, just like the existing tests for checking if the python2 devel files are in place, allowing the build with python3 if available, fallbacking to python2 and then just disabling it if none are available. So, using the PYTHON variable to build it using O= we get: Before this patch: $ rpm -q python3 python3-devel python3-3.6.4-7.fc27.x86_64 python3-devel-3.6.4-7.fc27.x86_64 $ rm -rf /tmp/build/perf/ ; mkdir -p /tmp/build/perf ; make O=/tmp/build/perf PYTHON=/usr/bin/python3 -C tools/perf install-bin make: Entering directory '/home/acme/git/linux/tools/perf' <SNIP> Makefile.config:670: Python 3 is not yet supported; please set Makefile.config:671: PYTHON and/or PYTHON_CONFIG appropriately. Makefile.config:672: If you also have Python 2 installed, then Makefile.config:673: try something like: Makefile.config:674: Makefile.config:675: make PYTHON=python2 Makefile.config:676: Makefile.config:677: Otherwise, disable Python support entirely: Makefile.config:678: Makefile.config:679: make NO_LIBPYTHON=1 Makefile.config:680: Makefile.config:681: *** . Stop. make[1]: *** [Makefile.perf:212: sub-make] Error 2 make: *** [Makefile:110: install-bin] Error 2 make: Leaving directory '/home/acme/git/linux/tools/perf' $ After: $ make O=/tmp/build/perf PYTHON=python3 -C tools/perf install-bin $ ldd ~/bin/perf | grep python libpython3.6m.so.1.0 => /lib64/libpython3.6m.so.1.0 (0x00007f58a31e8000) $ rpm -qf /lib64/libpython3.6m.so.1.0 python3-libs-3.6.4-7.fc27.x86_64 $ Now verify that when using the binding the right ELF file is loaded, using perf trace: $ perf trace -e open* perf test python 0.051 ( 0.016 ms): perf/3927 openat(dfd: CWD, filename: /etc/ld.so.cache, flags: CLOEXEC ) = 3 <SNIP> 18: 'import perf' in python : 8.849 ( 0.013 ms): sh/3929 openat(dfd: CWD, filename: /etc/ld.so.cache, flags: CLOEXEC ) = 3 <SNIP> 25.572 ( 0.008 ms): python3/3931 openat(dfd: CWD, filename: /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so, flags: CLOEXEC) = 3 <SNIP> Ok <SNIP> $ And using tools/perf/python/twatch.py, to show PERF_RECORD_ metaevents: $ python3 tools/perf/python/twatch.py cpu: 3, pid: 16060, tid: 16060 { type: fork, pid: 5207, ppid: 16060, tid: 5207, ptid: 16060, time: 10798513015459} cpu: 3, pid: 16060, tid: 16060 { type: fork, pid: 5208, ppid: 16060, tid: 5208, ptid: 16060, time: 10798513562503} cpu: 0, pid: 5208, tid: 5208 { type: comm, pid: 5208, tid: 5208, comm: grep } cpu: 2, pid: 5207, tid: 5207 { type: comm, pid: 5207, tid: 5207, comm: ps } cpu: 2, pid: 5207, tid: 5207 { type: exit, pid: 5207, ppid: 5207, tid: 5207, ptid: 5207, time: 10798551337484} cpu: 3, pid: 5208, tid: 5208 { type: exit, pid: 5208, ppid: 5208, tid: 5208, ptid: 5208, time: 10798551292153} cpu: 3, pid: 601, tid: 601 { type: fork, pid: 5209, ppid: 601, tid: 5209, ptid: 601, time: 10801779977324} ^CTraceback (most recent call last): File "tools/perf/python/twatch.py", line 68, in <module> main() File "tools/perf/python/twatch.py", line 40, in main evlist.poll(timeout = -1) KeyboardInterrupt $ # ps ax|grep twatch 5197 pts/8 S+ 0:00 python3 tools/perf/python/twatch.py # ls -la /proc/5197/smaps -r--r--r--. 1 acme acme 0 Feb 19 13:14 /proc/5197/smaps # grep python /proc/5197/smaps 558111307000-558111309000 r-xp 00000000 fd:00 3151710 /usr/bin/python3.6 558111508000-558111509000 r--p 00001000 fd:00 3151710 /usr/bin/python3.6 558111509000-55811150a000 rw-p 00002000 fd:00 3151710 /usr/bin/python3.6 7ffad6fc1000-7ffad7008000 r-xp 00000000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so 7ffad7008000-7ffad7207000 ---p 00047000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so 7ffad7207000-7ffad7208000 r--p 00046000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so 7ffad7208000-7ffad7215000 rw-p 00047000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so 7ffadea77000-7ffaded3d000 r-xp 00000000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0 7ffaded3d000-7ffadef3c000 ---p 002c6000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0 7ffadef3c000-7ffadef42000 r--p 002c5000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0 7ffadef42000-7ffadefa5000 rw-p 002cb000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0 # And with this patch, but building normally, without specifying the PYTHON=python3 part, which will make it use python2 if its devel files are available, like in this test: $ make O=/tmp/build/perf -C tools/perf install-bin $ ldd ~/bin/perf | grep python libpython2.7.so.1.0 => /lib64/libpython2.7.so.1.0 (0x00007f6a44410000) $ ldd /tmp/build/perf/python_ext_build/lib/perf.so | grep python libpython2.7.so.1.0 => /lib64/libpython2.7.so.1.0 (0x00007fed28a2c000) $ [acme@jouet perf]$ tools/perf/python/twatch.py cpu: 0, pid: 2817, tid: 2817 { type: fork, pid: 2817, ppid: 2817, tid: 8910, ptid: 2817, time: 11126454335306} cpu: 0, pid: 2817, tid: 2817 { type: comm, pid: 2817, tid: 8910, comm: worker } $ ps ax | grep twatch.py 8909 pts/8 S+ 0:00 /usr/bin/python tools/perf/python/twatch.py $ grep python /proc/8909/smaps 5579de658000-5579de659000 r-xp 00000000 fd:00 3156044 /usr/bin/python2.7 5579de858000-5579de859000 r--p 00000000 fd:00 3156044 /usr/bin/python2.7 5579de859000-5579de85a000 rw-p 00001000 fd:00 3156044 /usr/bin/python2.7 7f0de01f7000-7f0de023e000 r-xp 00000000 00:2d 230695 /tmp/build/perf/python/perf.so 7f0de023e000-7f0de043d000 ---p 00047000 00:2d 230695 /tmp/build/perf/python/perf.so 7f0de043d000-7f0de043e000 r--p 00046000 00:2d 230695 /tmp/build/perf/python/perf.so 7f0de043e000-7f0de044b000 rw-p 00047000 00:2d 230695 /tmp/build/perf/python/perf.so 7f0de6f0f000-7f0de6f13000 r-xp 00000000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so 7f0de6f13000-7f0de7113000 ---p 00004000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so 7f0de7113000-7f0de7114000 r--p 00004000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so 7f0de7114000-7f0de7115000 rw-p 00005000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so 7f0de7e73000-7f0de8052000 r-xp 00000000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0 7f0de8052000-7f0de8251000 ---p 001df000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0 7f0de8251000-7f0de8255000 r--p 001de000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0 7f0de8255000-7f0de8291000 rw-p 001e2000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0 $ Signed-off-by: Jaroslav Škarvada <jskarvad@redhat.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> LPU-Reference: 20180119205641.24242-1-jskarvad@redhat.com Link: https://lkml.kernel.org/n/tip-8d7dt9kqp83vsz25hagug8fu@git.kernel.org [ Removed explicit check for python version, allowing it to really build with python3 ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-01-19 21:56:41 +01:00
#if PY_MAJOR_VERSION < 3
perf tools: Initial python binding First clarifying that this kind of binding is not a replacement or an equivalent to the 'perf script' way of using python with perf. The 'perf script' way is to process events and look at a given script for some python function that matches the events to pass each event for processing. This is a python module, i.e. everything is driven from the python script, that merely uses "import perf" or "from perf import". perf script is focused on tracepoints, this binding is focused on profiling as an initial target. More work is needed to make available tracepoint specific variables as event variables accessible via this binding. There is one example of such usage model, in tools/perf/python/twatch.py, a tool to watch "cycles" events together with task (fork, exit) and comm perf events. For now, due to me not being able to grok how python distutils cope with building C extensions outside the sources dir the install target just builds it, I'm using it as: [root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/ [root@emilia linux]# tools/perf/python/twatch.py cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: } cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: } cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: } cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: } cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: } cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: } cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: } cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534} cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls } cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024} The first 8 mmap events in this 8 way machine are a mistery that is still being investigated. More of the tools/perf/util/ APIs will be exposed via this python binding as the need arises. For now the focus is on creating events and processing them, symbol resolution is an obvious next step, with tracepoint variables as a close second step. Cc: Clark Williams <williams@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
PyMODINIT_FUNC initperf(void)
perf tools: Add Python 3 support Added Python 3 support while keeping Python 2.7 compatibility. Committer notes: This doesn't make it to auto detect python 3, one has to explicitely ask it to build with python 3 devel files, here are the instructions provided by Jaroslav: --- $ cp -a tools/perf tools/python3-perf $ make V=1 prefix=/usr -C tools/perf PYTHON=/usr/bin/python2 all $ make V=1 prefix=/usr -C tools/python3-perf PYTHON=/usr/bin/python3 all $ make V=1 prefix=/usr -C tools/python3-perf PYTHON=/usr/bin/python3 DESTDIR=%{buildroot} install-python_ext $ make V=1 prefix=/usr -C tools/perf PYTHON=/usr/bin/python2 DESTDIR=%{buildroot} install-python_ext --- We need to make this automatic, just like the existing tests for checking if the python2 devel files are in place, allowing the build with python3 if available, fallbacking to python2 and then just disabling it if none are available. So, using the PYTHON variable to build it using O= we get: Before this patch: $ rpm -q python3 python3-devel python3-3.6.4-7.fc27.x86_64 python3-devel-3.6.4-7.fc27.x86_64 $ rm -rf /tmp/build/perf/ ; mkdir -p /tmp/build/perf ; make O=/tmp/build/perf PYTHON=/usr/bin/python3 -C tools/perf install-bin make: Entering directory '/home/acme/git/linux/tools/perf' <SNIP> Makefile.config:670: Python 3 is not yet supported; please set Makefile.config:671: PYTHON and/or PYTHON_CONFIG appropriately. Makefile.config:672: If you also have Python 2 installed, then Makefile.config:673: try something like: Makefile.config:674: Makefile.config:675: make PYTHON=python2 Makefile.config:676: Makefile.config:677: Otherwise, disable Python support entirely: Makefile.config:678: Makefile.config:679: make NO_LIBPYTHON=1 Makefile.config:680: Makefile.config:681: *** . Stop. make[1]: *** [Makefile.perf:212: sub-make] Error 2 make: *** [Makefile:110: install-bin] Error 2 make: Leaving directory '/home/acme/git/linux/tools/perf' $ After: $ make O=/tmp/build/perf PYTHON=python3 -C tools/perf install-bin $ ldd ~/bin/perf | grep python libpython3.6m.so.1.0 => /lib64/libpython3.6m.so.1.0 (0x00007f58a31e8000) $ rpm -qf /lib64/libpython3.6m.so.1.0 python3-libs-3.6.4-7.fc27.x86_64 $ Now verify that when using the binding the right ELF file is loaded, using perf trace: $ perf trace -e open* perf test python 0.051 ( 0.016 ms): perf/3927 openat(dfd: CWD, filename: /etc/ld.so.cache, flags: CLOEXEC ) = 3 <SNIP> 18: 'import perf' in python : 8.849 ( 0.013 ms): sh/3929 openat(dfd: CWD, filename: /etc/ld.so.cache, flags: CLOEXEC ) = 3 <SNIP> 25.572 ( 0.008 ms): python3/3931 openat(dfd: CWD, filename: /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so, flags: CLOEXEC) = 3 <SNIP> Ok <SNIP> $ And using tools/perf/python/twatch.py, to show PERF_RECORD_ metaevents: $ python3 tools/perf/python/twatch.py cpu: 3, pid: 16060, tid: 16060 { type: fork, pid: 5207, ppid: 16060, tid: 5207, ptid: 16060, time: 10798513015459} cpu: 3, pid: 16060, tid: 16060 { type: fork, pid: 5208, ppid: 16060, tid: 5208, ptid: 16060, time: 10798513562503} cpu: 0, pid: 5208, tid: 5208 { type: comm, pid: 5208, tid: 5208, comm: grep } cpu: 2, pid: 5207, tid: 5207 { type: comm, pid: 5207, tid: 5207, comm: ps } cpu: 2, pid: 5207, tid: 5207 { type: exit, pid: 5207, ppid: 5207, tid: 5207, ptid: 5207, time: 10798551337484} cpu: 3, pid: 5208, tid: 5208 { type: exit, pid: 5208, ppid: 5208, tid: 5208, ptid: 5208, time: 10798551292153} cpu: 3, pid: 601, tid: 601 { type: fork, pid: 5209, ppid: 601, tid: 5209, ptid: 601, time: 10801779977324} ^CTraceback (most recent call last): File "tools/perf/python/twatch.py", line 68, in <module> main() File "tools/perf/python/twatch.py", line 40, in main evlist.poll(timeout = -1) KeyboardInterrupt $ # ps ax|grep twatch 5197 pts/8 S+ 0:00 python3 tools/perf/python/twatch.py # ls -la /proc/5197/smaps -r--r--r--. 1 acme acme 0 Feb 19 13:14 /proc/5197/smaps # grep python /proc/5197/smaps 558111307000-558111309000 r-xp 00000000 fd:00 3151710 /usr/bin/python3.6 558111508000-558111509000 r--p 00001000 fd:00 3151710 /usr/bin/python3.6 558111509000-55811150a000 rw-p 00002000 fd:00 3151710 /usr/bin/python3.6 7ffad6fc1000-7ffad7008000 r-xp 00000000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so 7ffad7008000-7ffad7207000 ---p 00047000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so 7ffad7207000-7ffad7208000 r--p 00046000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so 7ffad7208000-7ffad7215000 rw-p 00047000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so 7ffadea77000-7ffaded3d000 r-xp 00000000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0 7ffaded3d000-7ffadef3c000 ---p 002c6000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0 7ffadef3c000-7ffadef42000 r--p 002c5000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0 7ffadef42000-7ffadefa5000 rw-p 002cb000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0 # And with this patch, but building normally, without specifying the PYTHON=python3 part, which will make it use python2 if its devel files are available, like in this test: $ make O=/tmp/build/perf -C tools/perf install-bin $ ldd ~/bin/perf | grep python libpython2.7.so.1.0 => /lib64/libpython2.7.so.1.0 (0x00007f6a44410000) $ ldd /tmp/build/perf/python_ext_build/lib/perf.so | grep python libpython2.7.so.1.0 => /lib64/libpython2.7.so.1.0 (0x00007fed28a2c000) $ [acme@jouet perf]$ tools/perf/python/twatch.py cpu: 0, pid: 2817, tid: 2817 { type: fork, pid: 2817, ppid: 2817, tid: 8910, ptid: 2817, time: 11126454335306} cpu: 0, pid: 2817, tid: 2817 { type: comm, pid: 2817, tid: 8910, comm: worker } $ ps ax | grep twatch.py 8909 pts/8 S+ 0:00 /usr/bin/python tools/perf/python/twatch.py $ grep python /proc/8909/smaps 5579de658000-5579de659000 r-xp 00000000 fd:00 3156044 /usr/bin/python2.7 5579de858000-5579de859000 r--p 00000000 fd:00 3156044 /usr/bin/python2.7 5579de859000-5579de85a000 rw-p 00001000 fd:00 3156044 /usr/bin/python2.7 7f0de01f7000-7f0de023e000 r-xp 00000000 00:2d 230695 /tmp/build/perf/python/perf.so 7f0de023e000-7f0de043d000 ---p 00047000 00:2d 230695 /tmp/build/perf/python/perf.so 7f0de043d000-7f0de043e000 r--p 00046000 00:2d 230695 /tmp/build/perf/python/perf.so 7f0de043e000-7f0de044b000 rw-p 00047000 00:2d 230695 /tmp/build/perf/python/perf.so 7f0de6f0f000-7f0de6f13000 r-xp 00000000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so 7f0de6f13000-7f0de7113000 ---p 00004000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so 7f0de7113000-7f0de7114000 r--p 00004000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so 7f0de7114000-7f0de7115000 rw-p 00005000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so 7f0de7e73000-7f0de8052000 r-xp 00000000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0 7f0de8052000-7f0de8251000 ---p 001df000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0 7f0de8251000-7f0de8255000 r--p 001de000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0 7f0de8255000-7f0de8291000 rw-p 001e2000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0 $ Signed-off-by: Jaroslav Škarvada <jskarvad@redhat.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> LPU-Reference: 20180119205641.24242-1-jskarvad@redhat.com Link: https://lkml.kernel.org/n/tip-8d7dt9kqp83vsz25hagug8fu@git.kernel.org [ Removed explicit check for python version, allowing it to really build with python3 ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-01-19 21:56:41 +01:00
#else
PyMODINIT_FUNC PyInit_perf(void)
#endif
perf tools: Initial python binding First clarifying that this kind of binding is not a replacement or an equivalent to the 'perf script' way of using python with perf. The 'perf script' way is to process events and look at a given script for some python function that matches the events to pass each event for processing. This is a python module, i.e. everything is driven from the python script, that merely uses "import perf" or "from perf import". perf script is focused on tracepoints, this binding is focused on profiling as an initial target. More work is needed to make available tracepoint specific variables as event variables accessible via this binding. There is one example of such usage model, in tools/perf/python/twatch.py, a tool to watch "cycles" events together with task (fork, exit) and comm perf events. For now, due to me not being able to grok how python distutils cope with building C extensions outside the sources dir the install target just builds it, I'm using it as: [root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/ [root@emilia linux]# tools/perf/python/twatch.py cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: } cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: } cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: } cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: } cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: } cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: } cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: } cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534} cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls } cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024} The first 8 mmap events in this 8 way machine are a mistery that is still being investigated. More of the tools/perf/util/ APIs will be exposed via this python binding as the need arises. For now the focus is on creating events and processing them, symbol resolution is an obvious next step, with tracepoint variables as a close second step. Cc: Clark Williams <williams@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
{
PyObject *obj;
int i;
perf tools: Add Python 3 support Added Python 3 support while keeping Python 2.7 compatibility. Committer notes: This doesn't make it to auto detect python 3, one has to explicitely ask it to build with python 3 devel files, here are the instructions provided by Jaroslav: --- $ cp -a tools/perf tools/python3-perf $ make V=1 prefix=/usr -C tools/perf PYTHON=/usr/bin/python2 all $ make V=1 prefix=/usr -C tools/python3-perf PYTHON=/usr/bin/python3 all $ make V=1 prefix=/usr -C tools/python3-perf PYTHON=/usr/bin/python3 DESTDIR=%{buildroot} install-python_ext $ make V=1 prefix=/usr -C tools/perf PYTHON=/usr/bin/python2 DESTDIR=%{buildroot} install-python_ext --- We need to make this automatic, just like the existing tests for checking if the python2 devel files are in place, allowing the build with python3 if available, fallbacking to python2 and then just disabling it if none are available. So, using the PYTHON variable to build it using O= we get: Before this patch: $ rpm -q python3 python3-devel python3-3.6.4-7.fc27.x86_64 python3-devel-3.6.4-7.fc27.x86_64 $ rm -rf /tmp/build/perf/ ; mkdir -p /tmp/build/perf ; make O=/tmp/build/perf PYTHON=/usr/bin/python3 -C tools/perf install-bin make: Entering directory '/home/acme/git/linux/tools/perf' <SNIP> Makefile.config:670: Python 3 is not yet supported; please set Makefile.config:671: PYTHON and/or PYTHON_CONFIG appropriately. Makefile.config:672: If you also have Python 2 installed, then Makefile.config:673: try something like: Makefile.config:674: Makefile.config:675: make PYTHON=python2 Makefile.config:676: Makefile.config:677: Otherwise, disable Python support entirely: Makefile.config:678: Makefile.config:679: make NO_LIBPYTHON=1 Makefile.config:680: Makefile.config:681: *** . Stop. make[1]: *** [Makefile.perf:212: sub-make] Error 2 make: *** [Makefile:110: install-bin] Error 2 make: Leaving directory '/home/acme/git/linux/tools/perf' $ After: $ make O=/tmp/build/perf PYTHON=python3 -C tools/perf install-bin $ ldd ~/bin/perf | grep python libpython3.6m.so.1.0 => /lib64/libpython3.6m.so.1.0 (0x00007f58a31e8000) $ rpm -qf /lib64/libpython3.6m.so.1.0 python3-libs-3.6.4-7.fc27.x86_64 $ Now verify that when using the binding the right ELF file is loaded, using perf trace: $ perf trace -e open* perf test python 0.051 ( 0.016 ms): perf/3927 openat(dfd: CWD, filename: /etc/ld.so.cache, flags: CLOEXEC ) = 3 <SNIP> 18: 'import perf' in python : 8.849 ( 0.013 ms): sh/3929 openat(dfd: CWD, filename: /etc/ld.so.cache, flags: CLOEXEC ) = 3 <SNIP> 25.572 ( 0.008 ms): python3/3931 openat(dfd: CWD, filename: /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so, flags: CLOEXEC) = 3 <SNIP> Ok <SNIP> $ And using tools/perf/python/twatch.py, to show PERF_RECORD_ metaevents: $ python3 tools/perf/python/twatch.py cpu: 3, pid: 16060, tid: 16060 { type: fork, pid: 5207, ppid: 16060, tid: 5207, ptid: 16060, time: 10798513015459} cpu: 3, pid: 16060, tid: 16060 { type: fork, pid: 5208, ppid: 16060, tid: 5208, ptid: 16060, time: 10798513562503} cpu: 0, pid: 5208, tid: 5208 { type: comm, pid: 5208, tid: 5208, comm: grep } cpu: 2, pid: 5207, tid: 5207 { type: comm, pid: 5207, tid: 5207, comm: ps } cpu: 2, pid: 5207, tid: 5207 { type: exit, pid: 5207, ppid: 5207, tid: 5207, ptid: 5207, time: 10798551337484} cpu: 3, pid: 5208, tid: 5208 { type: exit, pid: 5208, ppid: 5208, tid: 5208, ptid: 5208, time: 10798551292153} cpu: 3, pid: 601, tid: 601 { type: fork, pid: 5209, ppid: 601, tid: 5209, ptid: 601, time: 10801779977324} ^CTraceback (most recent call last): File "tools/perf/python/twatch.py", line 68, in <module> main() File "tools/perf/python/twatch.py", line 40, in main evlist.poll(timeout = -1) KeyboardInterrupt $ # ps ax|grep twatch 5197 pts/8 S+ 0:00 python3 tools/perf/python/twatch.py # ls -la /proc/5197/smaps -r--r--r--. 1 acme acme 0 Feb 19 13:14 /proc/5197/smaps # grep python /proc/5197/smaps 558111307000-558111309000 r-xp 00000000 fd:00 3151710 /usr/bin/python3.6 558111508000-558111509000 r--p 00001000 fd:00 3151710 /usr/bin/python3.6 558111509000-55811150a000 rw-p 00002000 fd:00 3151710 /usr/bin/python3.6 7ffad6fc1000-7ffad7008000 r-xp 00000000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so 7ffad7008000-7ffad7207000 ---p 00047000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so 7ffad7207000-7ffad7208000 r--p 00046000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so 7ffad7208000-7ffad7215000 rw-p 00047000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so 7ffadea77000-7ffaded3d000 r-xp 00000000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0 7ffaded3d000-7ffadef3c000 ---p 002c6000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0 7ffadef3c000-7ffadef42000 r--p 002c5000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0 7ffadef42000-7ffadefa5000 rw-p 002cb000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0 # And with this patch, but building normally, without specifying the PYTHON=python3 part, which will make it use python2 if its devel files are available, like in this test: $ make O=/tmp/build/perf -C tools/perf install-bin $ ldd ~/bin/perf | grep python libpython2.7.so.1.0 => /lib64/libpython2.7.so.1.0 (0x00007f6a44410000) $ ldd /tmp/build/perf/python_ext_build/lib/perf.so | grep python libpython2.7.so.1.0 => /lib64/libpython2.7.so.1.0 (0x00007fed28a2c000) $ [acme@jouet perf]$ tools/perf/python/twatch.py cpu: 0, pid: 2817, tid: 2817 { type: fork, pid: 2817, ppid: 2817, tid: 8910, ptid: 2817, time: 11126454335306} cpu: 0, pid: 2817, tid: 2817 { type: comm, pid: 2817, tid: 8910, comm: worker } $ ps ax | grep twatch.py 8909 pts/8 S+ 0:00 /usr/bin/python tools/perf/python/twatch.py $ grep python /proc/8909/smaps 5579de658000-5579de659000 r-xp 00000000 fd:00 3156044 /usr/bin/python2.7 5579de858000-5579de859000 r--p 00000000 fd:00 3156044 /usr/bin/python2.7 5579de859000-5579de85a000 rw-p 00001000 fd:00 3156044 /usr/bin/python2.7 7f0de01f7000-7f0de023e000 r-xp 00000000 00:2d 230695 /tmp/build/perf/python/perf.so 7f0de023e000-7f0de043d000 ---p 00047000 00:2d 230695 /tmp/build/perf/python/perf.so 7f0de043d000-7f0de043e000 r--p 00046000 00:2d 230695 /tmp/build/perf/python/perf.so 7f0de043e000-7f0de044b000 rw-p 00047000 00:2d 230695 /tmp/build/perf/python/perf.so 7f0de6f0f000-7f0de6f13000 r-xp 00000000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so 7f0de6f13000-7f0de7113000 ---p 00004000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so 7f0de7113000-7f0de7114000 r--p 00004000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so 7f0de7114000-7f0de7115000 rw-p 00005000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so 7f0de7e73000-7f0de8052000 r-xp 00000000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0 7f0de8052000-7f0de8251000 ---p 001df000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0 7f0de8251000-7f0de8255000 r--p 001de000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0 7f0de8255000-7f0de8291000 rw-p 001e2000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0 $ Signed-off-by: Jaroslav Škarvada <jskarvad@redhat.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> LPU-Reference: 20180119205641.24242-1-jskarvad@redhat.com Link: https://lkml.kernel.org/n/tip-8d7dt9kqp83vsz25hagug8fu@git.kernel.org [ Removed explicit check for python version, allowing it to really build with python3 ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-01-19 21:56:41 +01:00
PyObject *dict;
#if PY_MAJOR_VERSION < 3
PyObject *module = Py_InitModule("perf", perf__methods);
#else
static struct PyModuleDef moduledef = {
PyModuleDef_HEAD_INIT,
"perf", /* m_name */
"", /* m_doc */
-1, /* m_size */
perf__methods, /* m_methods */
NULL, /* m_reload */
NULL, /* m_traverse */
NULL, /* m_clear */
NULL, /* m_free */
};
PyObject *module = PyModule_Create(&moduledef);
#endif
perf tools: Initial python binding First clarifying that this kind of binding is not a replacement or an equivalent to the 'perf script' way of using python with perf. The 'perf script' way is to process events and look at a given script for some python function that matches the events to pass each event for processing. This is a python module, i.e. everything is driven from the python script, that merely uses "import perf" or "from perf import". perf script is focused on tracepoints, this binding is focused on profiling as an initial target. More work is needed to make available tracepoint specific variables as event variables accessible via this binding. There is one example of such usage model, in tools/perf/python/twatch.py, a tool to watch "cycles" events together with task (fork, exit) and comm perf events. For now, due to me not being able to grok how python distutils cope with building C extensions outside the sources dir the install target just builds it, I'm using it as: [root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/ [root@emilia linux]# tools/perf/python/twatch.py cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: } cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: } cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: } cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: } cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: } cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: } cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: } cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534} cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls } cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024} The first 8 mmap events in this 8 way machine are a mistery that is still being investigated. More of the tools/perf/util/ APIs will be exposed via this python binding as the need arises. For now the focus is on creating events and processing them, symbol resolution is an obvious next step, with tracepoint variables as a close second step. Cc: Clark Williams <williams@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
if (module == NULL ||
pyrf_event__setup_types() < 0 ||
pyrf_evlist__setup_types() < 0 ||
pyrf_evsel__setup_types() < 0 ||
pyrf_thread_map__setup_types() < 0 ||
pyrf_cpu_map__setup_types() < 0)
perf tools: Add Python 3 support Added Python 3 support while keeping Python 2.7 compatibility. Committer notes: This doesn't make it to auto detect python 3, one has to explicitely ask it to build with python 3 devel files, here are the instructions provided by Jaroslav: --- $ cp -a tools/perf tools/python3-perf $ make V=1 prefix=/usr -C tools/perf PYTHON=/usr/bin/python2 all $ make V=1 prefix=/usr -C tools/python3-perf PYTHON=/usr/bin/python3 all $ make V=1 prefix=/usr -C tools/python3-perf PYTHON=/usr/bin/python3 DESTDIR=%{buildroot} install-python_ext $ make V=1 prefix=/usr -C tools/perf PYTHON=/usr/bin/python2 DESTDIR=%{buildroot} install-python_ext --- We need to make this automatic, just like the existing tests for checking if the python2 devel files are in place, allowing the build with python3 if available, fallbacking to python2 and then just disabling it if none are available. So, using the PYTHON variable to build it using O= we get: Before this patch: $ rpm -q python3 python3-devel python3-3.6.4-7.fc27.x86_64 python3-devel-3.6.4-7.fc27.x86_64 $ rm -rf /tmp/build/perf/ ; mkdir -p /tmp/build/perf ; make O=/tmp/build/perf PYTHON=/usr/bin/python3 -C tools/perf install-bin make: Entering directory '/home/acme/git/linux/tools/perf' <SNIP> Makefile.config:670: Python 3 is not yet supported; please set Makefile.config:671: PYTHON and/or PYTHON_CONFIG appropriately. Makefile.config:672: If you also have Python 2 installed, then Makefile.config:673: try something like: Makefile.config:674: Makefile.config:675: make PYTHON=python2 Makefile.config:676: Makefile.config:677: Otherwise, disable Python support entirely: Makefile.config:678: Makefile.config:679: make NO_LIBPYTHON=1 Makefile.config:680: Makefile.config:681: *** . Stop. make[1]: *** [Makefile.perf:212: sub-make] Error 2 make: *** [Makefile:110: install-bin] Error 2 make: Leaving directory '/home/acme/git/linux/tools/perf' $ After: $ make O=/tmp/build/perf PYTHON=python3 -C tools/perf install-bin $ ldd ~/bin/perf | grep python libpython3.6m.so.1.0 => /lib64/libpython3.6m.so.1.0 (0x00007f58a31e8000) $ rpm -qf /lib64/libpython3.6m.so.1.0 python3-libs-3.6.4-7.fc27.x86_64 $ Now verify that when using the binding the right ELF file is loaded, using perf trace: $ perf trace -e open* perf test python 0.051 ( 0.016 ms): perf/3927 openat(dfd: CWD, filename: /etc/ld.so.cache, flags: CLOEXEC ) = 3 <SNIP> 18: 'import perf' in python : 8.849 ( 0.013 ms): sh/3929 openat(dfd: CWD, filename: /etc/ld.so.cache, flags: CLOEXEC ) = 3 <SNIP> 25.572 ( 0.008 ms): python3/3931 openat(dfd: CWD, filename: /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so, flags: CLOEXEC) = 3 <SNIP> Ok <SNIP> $ And using tools/perf/python/twatch.py, to show PERF_RECORD_ metaevents: $ python3 tools/perf/python/twatch.py cpu: 3, pid: 16060, tid: 16060 { type: fork, pid: 5207, ppid: 16060, tid: 5207, ptid: 16060, time: 10798513015459} cpu: 3, pid: 16060, tid: 16060 { type: fork, pid: 5208, ppid: 16060, tid: 5208, ptid: 16060, time: 10798513562503} cpu: 0, pid: 5208, tid: 5208 { type: comm, pid: 5208, tid: 5208, comm: grep } cpu: 2, pid: 5207, tid: 5207 { type: comm, pid: 5207, tid: 5207, comm: ps } cpu: 2, pid: 5207, tid: 5207 { type: exit, pid: 5207, ppid: 5207, tid: 5207, ptid: 5207, time: 10798551337484} cpu: 3, pid: 5208, tid: 5208 { type: exit, pid: 5208, ppid: 5208, tid: 5208, ptid: 5208, time: 10798551292153} cpu: 3, pid: 601, tid: 601 { type: fork, pid: 5209, ppid: 601, tid: 5209, ptid: 601, time: 10801779977324} ^CTraceback (most recent call last): File "tools/perf/python/twatch.py", line 68, in <module> main() File "tools/perf/python/twatch.py", line 40, in main evlist.poll(timeout = -1) KeyboardInterrupt $ # ps ax|grep twatch 5197 pts/8 S+ 0:00 python3 tools/perf/python/twatch.py # ls -la /proc/5197/smaps -r--r--r--. 1 acme acme 0 Feb 19 13:14 /proc/5197/smaps # grep python /proc/5197/smaps 558111307000-558111309000 r-xp 00000000 fd:00 3151710 /usr/bin/python3.6 558111508000-558111509000 r--p 00001000 fd:00 3151710 /usr/bin/python3.6 558111509000-55811150a000 rw-p 00002000 fd:00 3151710 /usr/bin/python3.6 7ffad6fc1000-7ffad7008000 r-xp 00000000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so 7ffad7008000-7ffad7207000 ---p 00047000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so 7ffad7207000-7ffad7208000 r--p 00046000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so 7ffad7208000-7ffad7215000 rw-p 00047000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so 7ffadea77000-7ffaded3d000 r-xp 00000000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0 7ffaded3d000-7ffadef3c000 ---p 002c6000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0 7ffadef3c000-7ffadef42000 r--p 002c5000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0 7ffadef42000-7ffadefa5000 rw-p 002cb000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0 # And with this patch, but building normally, without specifying the PYTHON=python3 part, which will make it use python2 if its devel files are available, like in this test: $ make O=/tmp/build/perf -C tools/perf install-bin $ ldd ~/bin/perf | grep python libpython2.7.so.1.0 => /lib64/libpython2.7.so.1.0 (0x00007f6a44410000) $ ldd /tmp/build/perf/python_ext_build/lib/perf.so | grep python libpython2.7.so.1.0 => /lib64/libpython2.7.so.1.0 (0x00007fed28a2c000) $ [acme@jouet perf]$ tools/perf/python/twatch.py cpu: 0, pid: 2817, tid: 2817 { type: fork, pid: 2817, ppid: 2817, tid: 8910, ptid: 2817, time: 11126454335306} cpu: 0, pid: 2817, tid: 2817 { type: comm, pid: 2817, tid: 8910, comm: worker } $ ps ax | grep twatch.py 8909 pts/8 S+ 0:00 /usr/bin/python tools/perf/python/twatch.py $ grep python /proc/8909/smaps 5579de658000-5579de659000 r-xp 00000000 fd:00 3156044 /usr/bin/python2.7 5579de858000-5579de859000 r--p 00000000 fd:00 3156044 /usr/bin/python2.7 5579de859000-5579de85a000 rw-p 00001000 fd:00 3156044 /usr/bin/python2.7 7f0de01f7000-7f0de023e000 r-xp 00000000 00:2d 230695 /tmp/build/perf/python/perf.so 7f0de023e000-7f0de043d000 ---p 00047000 00:2d 230695 /tmp/build/perf/python/perf.so 7f0de043d000-7f0de043e000 r--p 00046000 00:2d 230695 /tmp/build/perf/python/perf.so 7f0de043e000-7f0de044b000 rw-p 00047000 00:2d 230695 /tmp/build/perf/python/perf.so 7f0de6f0f000-7f0de6f13000 r-xp 00000000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so 7f0de6f13000-7f0de7113000 ---p 00004000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so 7f0de7113000-7f0de7114000 r--p 00004000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so 7f0de7114000-7f0de7115000 rw-p 00005000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so 7f0de7e73000-7f0de8052000 r-xp 00000000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0 7f0de8052000-7f0de8251000 ---p 001df000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0 7f0de8251000-7f0de8255000 r--p 001de000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0 7f0de8255000-7f0de8291000 rw-p 001e2000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0 $ Signed-off-by: Jaroslav Škarvada <jskarvad@redhat.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> LPU-Reference: 20180119205641.24242-1-jskarvad@redhat.com Link: https://lkml.kernel.org/n/tip-8d7dt9kqp83vsz25hagug8fu@git.kernel.org [ Removed explicit check for python version, allowing it to really build with python3 ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-01-19 21:56:41 +01:00
#if PY_MAJOR_VERSION < 3
perf tools: Initial python binding First clarifying that this kind of binding is not a replacement or an equivalent to the 'perf script' way of using python with perf. The 'perf script' way is to process events and look at a given script for some python function that matches the events to pass each event for processing. This is a python module, i.e. everything is driven from the python script, that merely uses "import perf" or "from perf import". perf script is focused on tracepoints, this binding is focused on profiling as an initial target. More work is needed to make available tracepoint specific variables as event variables accessible via this binding. There is one example of such usage model, in tools/perf/python/twatch.py, a tool to watch "cycles" events together with task (fork, exit) and comm perf events. For now, due to me not being able to grok how python distutils cope with building C extensions outside the sources dir the install target just builds it, I'm using it as: [root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/ [root@emilia linux]# tools/perf/python/twatch.py cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: } cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: } cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: } cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: } cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: } cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: } cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: } cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534} cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls } cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024} The first 8 mmap events in this 8 way machine are a mistery that is still being investigated. More of the tools/perf/util/ APIs will be exposed via this python binding as the need arises. For now the focus is on creating events and processing them, symbol resolution is an obvious next step, with tracepoint variables as a close second step. Cc: Clark Williams <williams@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
return;
perf tools: Add Python 3 support Added Python 3 support while keeping Python 2.7 compatibility. Committer notes: This doesn't make it to auto detect python 3, one has to explicitely ask it to build with python 3 devel files, here are the instructions provided by Jaroslav: --- $ cp -a tools/perf tools/python3-perf $ make V=1 prefix=/usr -C tools/perf PYTHON=/usr/bin/python2 all $ make V=1 prefix=/usr -C tools/python3-perf PYTHON=/usr/bin/python3 all $ make V=1 prefix=/usr -C tools/python3-perf PYTHON=/usr/bin/python3 DESTDIR=%{buildroot} install-python_ext $ make V=1 prefix=/usr -C tools/perf PYTHON=/usr/bin/python2 DESTDIR=%{buildroot} install-python_ext --- We need to make this automatic, just like the existing tests for checking if the python2 devel files are in place, allowing the build with python3 if available, fallbacking to python2 and then just disabling it if none are available. So, using the PYTHON variable to build it using O= we get: Before this patch: $ rpm -q python3 python3-devel python3-3.6.4-7.fc27.x86_64 python3-devel-3.6.4-7.fc27.x86_64 $ rm -rf /tmp/build/perf/ ; mkdir -p /tmp/build/perf ; make O=/tmp/build/perf PYTHON=/usr/bin/python3 -C tools/perf install-bin make: Entering directory '/home/acme/git/linux/tools/perf' <SNIP> Makefile.config:670: Python 3 is not yet supported; please set Makefile.config:671: PYTHON and/or PYTHON_CONFIG appropriately. Makefile.config:672: If you also have Python 2 installed, then Makefile.config:673: try something like: Makefile.config:674: Makefile.config:675: make PYTHON=python2 Makefile.config:676: Makefile.config:677: Otherwise, disable Python support entirely: Makefile.config:678: Makefile.config:679: make NO_LIBPYTHON=1 Makefile.config:680: Makefile.config:681: *** . Stop. make[1]: *** [Makefile.perf:212: sub-make] Error 2 make: *** [Makefile:110: install-bin] Error 2 make: Leaving directory '/home/acme/git/linux/tools/perf' $ After: $ make O=/tmp/build/perf PYTHON=python3 -C tools/perf install-bin $ ldd ~/bin/perf | grep python libpython3.6m.so.1.0 => /lib64/libpython3.6m.so.1.0 (0x00007f58a31e8000) $ rpm -qf /lib64/libpython3.6m.so.1.0 python3-libs-3.6.4-7.fc27.x86_64 $ Now verify that when using the binding the right ELF file is loaded, using perf trace: $ perf trace -e open* perf test python 0.051 ( 0.016 ms): perf/3927 openat(dfd: CWD, filename: /etc/ld.so.cache, flags: CLOEXEC ) = 3 <SNIP> 18: 'import perf' in python : 8.849 ( 0.013 ms): sh/3929 openat(dfd: CWD, filename: /etc/ld.so.cache, flags: CLOEXEC ) = 3 <SNIP> 25.572 ( 0.008 ms): python3/3931 openat(dfd: CWD, filename: /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so, flags: CLOEXEC) = 3 <SNIP> Ok <SNIP> $ And using tools/perf/python/twatch.py, to show PERF_RECORD_ metaevents: $ python3 tools/perf/python/twatch.py cpu: 3, pid: 16060, tid: 16060 { type: fork, pid: 5207, ppid: 16060, tid: 5207, ptid: 16060, time: 10798513015459} cpu: 3, pid: 16060, tid: 16060 { type: fork, pid: 5208, ppid: 16060, tid: 5208, ptid: 16060, time: 10798513562503} cpu: 0, pid: 5208, tid: 5208 { type: comm, pid: 5208, tid: 5208, comm: grep } cpu: 2, pid: 5207, tid: 5207 { type: comm, pid: 5207, tid: 5207, comm: ps } cpu: 2, pid: 5207, tid: 5207 { type: exit, pid: 5207, ppid: 5207, tid: 5207, ptid: 5207, time: 10798551337484} cpu: 3, pid: 5208, tid: 5208 { type: exit, pid: 5208, ppid: 5208, tid: 5208, ptid: 5208, time: 10798551292153} cpu: 3, pid: 601, tid: 601 { type: fork, pid: 5209, ppid: 601, tid: 5209, ptid: 601, time: 10801779977324} ^CTraceback (most recent call last): File "tools/perf/python/twatch.py", line 68, in <module> main() File "tools/perf/python/twatch.py", line 40, in main evlist.poll(timeout = -1) KeyboardInterrupt $ # ps ax|grep twatch 5197 pts/8 S+ 0:00 python3 tools/perf/python/twatch.py # ls -la /proc/5197/smaps -r--r--r--. 1 acme acme 0 Feb 19 13:14 /proc/5197/smaps # grep python /proc/5197/smaps 558111307000-558111309000 r-xp 00000000 fd:00 3151710 /usr/bin/python3.6 558111508000-558111509000 r--p 00001000 fd:00 3151710 /usr/bin/python3.6 558111509000-55811150a000 rw-p 00002000 fd:00 3151710 /usr/bin/python3.6 7ffad6fc1000-7ffad7008000 r-xp 00000000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so 7ffad7008000-7ffad7207000 ---p 00047000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so 7ffad7207000-7ffad7208000 r--p 00046000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so 7ffad7208000-7ffad7215000 rw-p 00047000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so 7ffadea77000-7ffaded3d000 r-xp 00000000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0 7ffaded3d000-7ffadef3c000 ---p 002c6000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0 7ffadef3c000-7ffadef42000 r--p 002c5000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0 7ffadef42000-7ffadefa5000 rw-p 002cb000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0 # And with this patch, but building normally, without specifying the PYTHON=python3 part, which will make it use python2 if its devel files are available, like in this test: $ make O=/tmp/build/perf -C tools/perf install-bin $ ldd ~/bin/perf | grep python libpython2.7.so.1.0 => /lib64/libpython2.7.so.1.0 (0x00007f6a44410000) $ ldd /tmp/build/perf/python_ext_build/lib/perf.so | grep python libpython2.7.so.1.0 => /lib64/libpython2.7.so.1.0 (0x00007fed28a2c000) $ [acme@jouet perf]$ tools/perf/python/twatch.py cpu: 0, pid: 2817, tid: 2817 { type: fork, pid: 2817, ppid: 2817, tid: 8910, ptid: 2817, time: 11126454335306} cpu: 0, pid: 2817, tid: 2817 { type: comm, pid: 2817, tid: 8910, comm: worker } $ ps ax | grep twatch.py 8909 pts/8 S+ 0:00 /usr/bin/python tools/perf/python/twatch.py $ grep python /proc/8909/smaps 5579de658000-5579de659000 r-xp 00000000 fd:00 3156044 /usr/bin/python2.7 5579de858000-5579de859000 r--p 00000000 fd:00 3156044 /usr/bin/python2.7 5579de859000-5579de85a000 rw-p 00001000 fd:00 3156044 /usr/bin/python2.7 7f0de01f7000-7f0de023e000 r-xp 00000000 00:2d 230695 /tmp/build/perf/python/perf.so 7f0de023e000-7f0de043d000 ---p 00047000 00:2d 230695 /tmp/build/perf/python/perf.so 7f0de043d000-7f0de043e000 r--p 00046000 00:2d 230695 /tmp/build/perf/python/perf.so 7f0de043e000-7f0de044b000 rw-p 00047000 00:2d 230695 /tmp/build/perf/python/perf.so 7f0de6f0f000-7f0de6f13000 r-xp 00000000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so 7f0de6f13000-7f0de7113000 ---p 00004000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so 7f0de7113000-7f0de7114000 r--p 00004000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so 7f0de7114000-7f0de7115000 rw-p 00005000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so 7f0de7e73000-7f0de8052000 r-xp 00000000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0 7f0de8052000-7f0de8251000 ---p 001df000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0 7f0de8251000-7f0de8255000 r--p 001de000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0 7f0de8255000-7f0de8291000 rw-p 001e2000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0 $ Signed-off-by: Jaroslav Škarvada <jskarvad@redhat.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> LPU-Reference: 20180119205641.24242-1-jskarvad@redhat.com Link: https://lkml.kernel.org/n/tip-8d7dt9kqp83vsz25hagug8fu@git.kernel.org [ Removed explicit check for python version, allowing it to really build with python3 ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-01-19 21:56:41 +01:00
#else
return module;
#endif
perf tools: Initial python binding First clarifying that this kind of binding is not a replacement or an equivalent to the 'perf script' way of using python with perf. The 'perf script' way is to process events and look at a given script for some python function that matches the events to pass each event for processing. This is a python module, i.e. everything is driven from the python script, that merely uses "import perf" or "from perf import". perf script is focused on tracepoints, this binding is focused on profiling as an initial target. More work is needed to make available tracepoint specific variables as event variables accessible via this binding. There is one example of such usage model, in tools/perf/python/twatch.py, a tool to watch "cycles" events together with task (fork, exit) and comm perf events. For now, due to me not being able to grok how python distutils cope with building C extensions outside the sources dir the install target just builds it, I'm using it as: [root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/ [root@emilia linux]# tools/perf/python/twatch.py cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: } cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: } cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: } cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: } cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: } cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: } cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: } cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534} cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls } cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024} The first 8 mmap events in this 8 way machine are a mistery that is still being investigated. More of the tools/perf/util/ APIs will be exposed via this python binding as the need arises. For now the focus is on creating events and processing them, symbol resolution is an obvious next step, with tracepoint variables as a close second step. Cc: Clark Williams <williams@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
/* The page_size is placed in util object. */
page_size = sysconf(_SC_PAGE_SIZE);
perf tools: Initial python binding First clarifying that this kind of binding is not a replacement or an equivalent to the 'perf script' way of using python with perf. The 'perf script' way is to process events and look at a given script for some python function that matches the events to pass each event for processing. This is a python module, i.e. everything is driven from the python script, that merely uses "import perf" or "from perf import". perf script is focused on tracepoints, this binding is focused on profiling as an initial target. More work is needed to make available tracepoint specific variables as event variables accessible via this binding. There is one example of such usage model, in tools/perf/python/twatch.py, a tool to watch "cycles" events together with task (fork, exit) and comm perf events. For now, due to me not being able to grok how python distutils cope with building C extensions outside the sources dir the install target just builds it, I'm using it as: [root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/ [root@emilia linux]# tools/perf/python/twatch.py cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: } cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: } cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: } cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: } cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: } cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: } cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: } cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534} cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls } cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024} The first 8 mmap events in this 8 way machine are a mistery that is still being investigated. More of the tools/perf/util/ APIs will be exposed via this python binding as the need arises. For now the focus is on creating events and processing them, symbol resolution is an obvious next step, with tracepoint variables as a close second step. Cc: Clark Williams <williams@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
Py_INCREF(&pyrf_evlist__type);
PyModule_AddObject(module, "evlist", (PyObject*)&pyrf_evlist__type);
Py_INCREF(&pyrf_evsel__type);
PyModule_AddObject(module, "evsel", (PyObject*)&pyrf_evsel__type);
Py_INCREF(&pyrf_mmap_event__type);
PyModule_AddObject(module, "mmap_event", (PyObject *)&pyrf_mmap_event__type);
Py_INCREF(&pyrf_lost_event__type);
PyModule_AddObject(module, "lost_event", (PyObject *)&pyrf_lost_event__type);
Py_INCREF(&pyrf_comm_event__type);
PyModule_AddObject(module, "comm_event", (PyObject *)&pyrf_comm_event__type);
Py_INCREF(&pyrf_task_event__type);
PyModule_AddObject(module, "task_event", (PyObject *)&pyrf_task_event__type);
Py_INCREF(&pyrf_throttle_event__type);
PyModule_AddObject(module, "throttle_event", (PyObject *)&pyrf_throttle_event__type);
Py_INCREF(&pyrf_task_event__type);
PyModule_AddObject(module, "task_event", (PyObject *)&pyrf_task_event__type);
Py_INCREF(&pyrf_read_event__type);
PyModule_AddObject(module, "read_event", (PyObject *)&pyrf_read_event__type);
Py_INCREF(&pyrf_sample_event__type);
PyModule_AddObject(module, "sample_event", (PyObject *)&pyrf_sample_event__type);
Py_INCREF(&pyrf_context_switch_event__type);
PyModule_AddObject(module, "switch_event", (PyObject *)&pyrf_context_switch_event__type);
perf tools: Initial python binding First clarifying that this kind of binding is not a replacement or an equivalent to the 'perf script' way of using python with perf. The 'perf script' way is to process events and look at a given script for some python function that matches the events to pass each event for processing. This is a python module, i.e. everything is driven from the python script, that merely uses "import perf" or "from perf import". perf script is focused on tracepoints, this binding is focused on profiling as an initial target. More work is needed to make available tracepoint specific variables as event variables accessible via this binding. There is one example of such usage model, in tools/perf/python/twatch.py, a tool to watch "cycles" events together with task (fork, exit) and comm perf events. For now, due to me not being able to grok how python distutils cope with building C extensions outside the sources dir the install target just builds it, I'm using it as: [root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/ [root@emilia linux]# tools/perf/python/twatch.py cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: } cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: } cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: } cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: } cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: } cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: } cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: } cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534} cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls } cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024} The first 8 mmap events in this 8 way machine are a mistery that is still being investigated. More of the tools/perf/util/ APIs will be exposed via this python binding as the need arises. For now the focus is on creating events and processing them, symbol resolution is an obvious next step, with tracepoint variables as a close second step. Cc: Clark Williams <williams@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
Py_INCREF(&pyrf_thread_map__type);
PyModule_AddObject(module, "thread_map", (PyObject*)&pyrf_thread_map__type);
Py_INCREF(&pyrf_cpu_map__type);
PyModule_AddObject(module, "cpu_map", (PyObject*)&pyrf_cpu_map__type);
dict = PyModule_GetDict(module);
if (dict == NULL)
goto error;
for (i = 0; perf__constants[i].name != NULL; i++) {
perf tools: Add Python 3 support Added Python 3 support while keeping Python 2.7 compatibility. Committer notes: This doesn't make it to auto detect python 3, one has to explicitely ask it to build with python 3 devel files, here are the instructions provided by Jaroslav: --- $ cp -a tools/perf tools/python3-perf $ make V=1 prefix=/usr -C tools/perf PYTHON=/usr/bin/python2 all $ make V=1 prefix=/usr -C tools/python3-perf PYTHON=/usr/bin/python3 all $ make V=1 prefix=/usr -C tools/python3-perf PYTHON=/usr/bin/python3 DESTDIR=%{buildroot} install-python_ext $ make V=1 prefix=/usr -C tools/perf PYTHON=/usr/bin/python2 DESTDIR=%{buildroot} install-python_ext --- We need to make this automatic, just like the existing tests for checking if the python2 devel files are in place, allowing the build with python3 if available, fallbacking to python2 and then just disabling it if none are available. So, using the PYTHON variable to build it using O= we get: Before this patch: $ rpm -q python3 python3-devel python3-3.6.4-7.fc27.x86_64 python3-devel-3.6.4-7.fc27.x86_64 $ rm -rf /tmp/build/perf/ ; mkdir -p /tmp/build/perf ; make O=/tmp/build/perf PYTHON=/usr/bin/python3 -C tools/perf install-bin make: Entering directory '/home/acme/git/linux/tools/perf' <SNIP> Makefile.config:670: Python 3 is not yet supported; please set Makefile.config:671: PYTHON and/or PYTHON_CONFIG appropriately. Makefile.config:672: If you also have Python 2 installed, then Makefile.config:673: try something like: Makefile.config:674: Makefile.config:675: make PYTHON=python2 Makefile.config:676: Makefile.config:677: Otherwise, disable Python support entirely: Makefile.config:678: Makefile.config:679: make NO_LIBPYTHON=1 Makefile.config:680: Makefile.config:681: *** . Stop. make[1]: *** [Makefile.perf:212: sub-make] Error 2 make: *** [Makefile:110: install-bin] Error 2 make: Leaving directory '/home/acme/git/linux/tools/perf' $ After: $ make O=/tmp/build/perf PYTHON=python3 -C tools/perf install-bin $ ldd ~/bin/perf | grep python libpython3.6m.so.1.0 => /lib64/libpython3.6m.so.1.0 (0x00007f58a31e8000) $ rpm -qf /lib64/libpython3.6m.so.1.0 python3-libs-3.6.4-7.fc27.x86_64 $ Now verify that when using the binding the right ELF file is loaded, using perf trace: $ perf trace -e open* perf test python 0.051 ( 0.016 ms): perf/3927 openat(dfd: CWD, filename: /etc/ld.so.cache, flags: CLOEXEC ) = 3 <SNIP> 18: 'import perf' in python : 8.849 ( 0.013 ms): sh/3929 openat(dfd: CWD, filename: /etc/ld.so.cache, flags: CLOEXEC ) = 3 <SNIP> 25.572 ( 0.008 ms): python3/3931 openat(dfd: CWD, filename: /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so, flags: CLOEXEC) = 3 <SNIP> Ok <SNIP> $ And using tools/perf/python/twatch.py, to show PERF_RECORD_ metaevents: $ python3 tools/perf/python/twatch.py cpu: 3, pid: 16060, tid: 16060 { type: fork, pid: 5207, ppid: 16060, tid: 5207, ptid: 16060, time: 10798513015459} cpu: 3, pid: 16060, tid: 16060 { type: fork, pid: 5208, ppid: 16060, tid: 5208, ptid: 16060, time: 10798513562503} cpu: 0, pid: 5208, tid: 5208 { type: comm, pid: 5208, tid: 5208, comm: grep } cpu: 2, pid: 5207, tid: 5207 { type: comm, pid: 5207, tid: 5207, comm: ps } cpu: 2, pid: 5207, tid: 5207 { type: exit, pid: 5207, ppid: 5207, tid: 5207, ptid: 5207, time: 10798551337484} cpu: 3, pid: 5208, tid: 5208 { type: exit, pid: 5208, ppid: 5208, tid: 5208, ptid: 5208, time: 10798551292153} cpu: 3, pid: 601, tid: 601 { type: fork, pid: 5209, ppid: 601, tid: 5209, ptid: 601, time: 10801779977324} ^CTraceback (most recent call last): File "tools/perf/python/twatch.py", line 68, in <module> main() File "tools/perf/python/twatch.py", line 40, in main evlist.poll(timeout = -1) KeyboardInterrupt $ # ps ax|grep twatch 5197 pts/8 S+ 0:00 python3 tools/perf/python/twatch.py # ls -la /proc/5197/smaps -r--r--r--. 1 acme acme 0 Feb 19 13:14 /proc/5197/smaps # grep python /proc/5197/smaps 558111307000-558111309000 r-xp 00000000 fd:00 3151710 /usr/bin/python3.6 558111508000-558111509000 r--p 00001000 fd:00 3151710 /usr/bin/python3.6 558111509000-55811150a000 rw-p 00002000 fd:00 3151710 /usr/bin/python3.6 7ffad6fc1000-7ffad7008000 r-xp 00000000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so 7ffad7008000-7ffad7207000 ---p 00047000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so 7ffad7207000-7ffad7208000 r--p 00046000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so 7ffad7208000-7ffad7215000 rw-p 00047000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so 7ffadea77000-7ffaded3d000 r-xp 00000000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0 7ffaded3d000-7ffadef3c000 ---p 002c6000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0 7ffadef3c000-7ffadef42000 r--p 002c5000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0 7ffadef42000-7ffadefa5000 rw-p 002cb000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0 # And with this patch, but building normally, without specifying the PYTHON=python3 part, which will make it use python2 if its devel files are available, like in this test: $ make O=/tmp/build/perf -C tools/perf install-bin $ ldd ~/bin/perf | grep python libpython2.7.so.1.0 => /lib64/libpython2.7.so.1.0 (0x00007f6a44410000) $ ldd /tmp/build/perf/python_ext_build/lib/perf.so | grep python libpython2.7.so.1.0 => /lib64/libpython2.7.so.1.0 (0x00007fed28a2c000) $ [acme@jouet perf]$ tools/perf/python/twatch.py cpu: 0, pid: 2817, tid: 2817 { type: fork, pid: 2817, ppid: 2817, tid: 8910, ptid: 2817, time: 11126454335306} cpu: 0, pid: 2817, tid: 2817 { type: comm, pid: 2817, tid: 8910, comm: worker } $ ps ax | grep twatch.py 8909 pts/8 S+ 0:00 /usr/bin/python tools/perf/python/twatch.py $ grep python /proc/8909/smaps 5579de658000-5579de659000 r-xp 00000000 fd:00 3156044 /usr/bin/python2.7 5579de858000-5579de859000 r--p 00000000 fd:00 3156044 /usr/bin/python2.7 5579de859000-5579de85a000 rw-p 00001000 fd:00 3156044 /usr/bin/python2.7 7f0de01f7000-7f0de023e000 r-xp 00000000 00:2d 230695 /tmp/build/perf/python/perf.so 7f0de023e000-7f0de043d000 ---p 00047000 00:2d 230695 /tmp/build/perf/python/perf.so 7f0de043d000-7f0de043e000 r--p 00046000 00:2d 230695 /tmp/build/perf/python/perf.so 7f0de043e000-7f0de044b000 rw-p 00047000 00:2d 230695 /tmp/build/perf/python/perf.so 7f0de6f0f000-7f0de6f13000 r-xp 00000000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so 7f0de6f13000-7f0de7113000 ---p 00004000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so 7f0de7113000-7f0de7114000 r--p 00004000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so 7f0de7114000-7f0de7115000 rw-p 00005000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so 7f0de7e73000-7f0de8052000 r-xp 00000000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0 7f0de8052000-7f0de8251000 ---p 001df000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0 7f0de8251000-7f0de8255000 r--p 001de000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0 7f0de8255000-7f0de8291000 rw-p 001e2000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0 $ Signed-off-by: Jaroslav Škarvada <jskarvad@redhat.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> LPU-Reference: 20180119205641.24242-1-jskarvad@redhat.com Link: https://lkml.kernel.org/n/tip-8d7dt9kqp83vsz25hagug8fu@git.kernel.org [ Removed explicit check for python version, allowing it to really build with python3 ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-01-19 21:56:41 +01:00
obj = _PyLong_FromLong(perf__constants[i].value);
perf tools: Initial python binding First clarifying that this kind of binding is not a replacement or an equivalent to the 'perf script' way of using python with perf. The 'perf script' way is to process events and look at a given script for some python function that matches the events to pass each event for processing. This is a python module, i.e. everything is driven from the python script, that merely uses "import perf" or "from perf import". perf script is focused on tracepoints, this binding is focused on profiling as an initial target. More work is needed to make available tracepoint specific variables as event variables accessible via this binding. There is one example of such usage model, in tools/perf/python/twatch.py, a tool to watch "cycles" events together with task (fork, exit) and comm perf events. For now, due to me not being able to grok how python distutils cope with building C extensions outside the sources dir the install target just builds it, I'm using it as: [root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/ [root@emilia linux]# tools/perf/python/twatch.py cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: } cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: } cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: } cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: } cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: } cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: } cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: } cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534} cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls } cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024} The first 8 mmap events in this 8 way machine are a mistery that is still being investigated. More of the tools/perf/util/ APIs will be exposed via this python binding as the need arises. For now the focus is on creating events and processing them, symbol resolution is an obvious next step, with tracepoint variables as a close second step. Cc: Clark Williams <williams@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
if (obj == NULL)
goto error;
PyDict_SetItemString(dict, perf__constants[i].name, obj);
Py_DECREF(obj);
}
error:
if (PyErr_Occurred())
PyErr_SetString(PyExc_ImportError, "perf: Init failed!");
perf tools: Add Python 3 support Added Python 3 support while keeping Python 2.7 compatibility. Committer notes: This doesn't make it to auto detect python 3, one has to explicitely ask it to build with python 3 devel files, here are the instructions provided by Jaroslav: --- $ cp -a tools/perf tools/python3-perf $ make V=1 prefix=/usr -C tools/perf PYTHON=/usr/bin/python2 all $ make V=1 prefix=/usr -C tools/python3-perf PYTHON=/usr/bin/python3 all $ make V=1 prefix=/usr -C tools/python3-perf PYTHON=/usr/bin/python3 DESTDIR=%{buildroot} install-python_ext $ make V=1 prefix=/usr -C tools/perf PYTHON=/usr/bin/python2 DESTDIR=%{buildroot} install-python_ext --- We need to make this automatic, just like the existing tests for checking if the python2 devel files are in place, allowing the build with python3 if available, fallbacking to python2 and then just disabling it if none are available. So, using the PYTHON variable to build it using O= we get: Before this patch: $ rpm -q python3 python3-devel python3-3.6.4-7.fc27.x86_64 python3-devel-3.6.4-7.fc27.x86_64 $ rm -rf /tmp/build/perf/ ; mkdir -p /tmp/build/perf ; make O=/tmp/build/perf PYTHON=/usr/bin/python3 -C tools/perf install-bin make: Entering directory '/home/acme/git/linux/tools/perf' <SNIP> Makefile.config:670: Python 3 is not yet supported; please set Makefile.config:671: PYTHON and/or PYTHON_CONFIG appropriately. Makefile.config:672: If you also have Python 2 installed, then Makefile.config:673: try something like: Makefile.config:674: Makefile.config:675: make PYTHON=python2 Makefile.config:676: Makefile.config:677: Otherwise, disable Python support entirely: Makefile.config:678: Makefile.config:679: make NO_LIBPYTHON=1 Makefile.config:680: Makefile.config:681: *** . Stop. make[1]: *** [Makefile.perf:212: sub-make] Error 2 make: *** [Makefile:110: install-bin] Error 2 make: Leaving directory '/home/acme/git/linux/tools/perf' $ After: $ make O=/tmp/build/perf PYTHON=python3 -C tools/perf install-bin $ ldd ~/bin/perf | grep python libpython3.6m.so.1.0 => /lib64/libpython3.6m.so.1.0 (0x00007f58a31e8000) $ rpm -qf /lib64/libpython3.6m.so.1.0 python3-libs-3.6.4-7.fc27.x86_64 $ Now verify that when using the binding the right ELF file is loaded, using perf trace: $ perf trace -e open* perf test python 0.051 ( 0.016 ms): perf/3927 openat(dfd: CWD, filename: /etc/ld.so.cache, flags: CLOEXEC ) = 3 <SNIP> 18: 'import perf' in python : 8.849 ( 0.013 ms): sh/3929 openat(dfd: CWD, filename: /etc/ld.so.cache, flags: CLOEXEC ) = 3 <SNIP> 25.572 ( 0.008 ms): python3/3931 openat(dfd: CWD, filename: /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so, flags: CLOEXEC) = 3 <SNIP> Ok <SNIP> $ And using tools/perf/python/twatch.py, to show PERF_RECORD_ metaevents: $ python3 tools/perf/python/twatch.py cpu: 3, pid: 16060, tid: 16060 { type: fork, pid: 5207, ppid: 16060, tid: 5207, ptid: 16060, time: 10798513015459} cpu: 3, pid: 16060, tid: 16060 { type: fork, pid: 5208, ppid: 16060, tid: 5208, ptid: 16060, time: 10798513562503} cpu: 0, pid: 5208, tid: 5208 { type: comm, pid: 5208, tid: 5208, comm: grep } cpu: 2, pid: 5207, tid: 5207 { type: comm, pid: 5207, tid: 5207, comm: ps } cpu: 2, pid: 5207, tid: 5207 { type: exit, pid: 5207, ppid: 5207, tid: 5207, ptid: 5207, time: 10798551337484} cpu: 3, pid: 5208, tid: 5208 { type: exit, pid: 5208, ppid: 5208, tid: 5208, ptid: 5208, time: 10798551292153} cpu: 3, pid: 601, tid: 601 { type: fork, pid: 5209, ppid: 601, tid: 5209, ptid: 601, time: 10801779977324} ^CTraceback (most recent call last): File "tools/perf/python/twatch.py", line 68, in <module> main() File "tools/perf/python/twatch.py", line 40, in main evlist.poll(timeout = -1) KeyboardInterrupt $ # ps ax|grep twatch 5197 pts/8 S+ 0:00 python3 tools/perf/python/twatch.py # ls -la /proc/5197/smaps -r--r--r--. 1 acme acme 0 Feb 19 13:14 /proc/5197/smaps # grep python /proc/5197/smaps 558111307000-558111309000 r-xp 00000000 fd:00 3151710 /usr/bin/python3.6 558111508000-558111509000 r--p 00001000 fd:00 3151710 /usr/bin/python3.6 558111509000-55811150a000 rw-p 00002000 fd:00 3151710 /usr/bin/python3.6 7ffad6fc1000-7ffad7008000 r-xp 00000000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so 7ffad7008000-7ffad7207000 ---p 00047000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so 7ffad7207000-7ffad7208000 r--p 00046000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so 7ffad7208000-7ffad7215000 rw-p 00047000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so 7ffadea77000-7ffaded3d000 r-xp 00000000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0 7ffaded3d000-7ffadef3c000 ---p 002c6000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0 7ffadef3c000-7ffadef42000 r--p 002c5000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0 7ffadef42000-7ffadefa5000 rw-p 002cb000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0 # And with this patch, but building normally, without specifying the PYTHON=python3 part, which will make it use python2 if its devel files are available, like in this test: $ make O=/tmp/build/perf -C tools/perf install-bin $ ldd ~/bin/perf | grep python libpython2.7.so.1.0 => /lib64/libpython2.7.so.1.0 (0x00007f6a44410000) $ ldd /tmp/build/perf/python_ext_build/lib/perf.so | grep python libpython2.7.so.1.0 => /lib64/libpython2.7.so.1.0 (0x00007fed28a2c000) $ [acme@jouet perf]$ tools/perf/python/twatch.py cpu: 0, pid: 2817, tid: 2817 { type: fork, pid: 2817, ppid: 2817, tid: 8910, ptid: 2817, time: 11126454335306} cpu: 0, pid: 2817, tid: 2817 { type: comm, pid: 2817, tid: 8910, comm: worker } $ ps ax | grep twatch.py 8909 pts/8 S+ 0:00 /usr/bin/python tools/perf/python/twatch.py $ grep python /proc/8909/smaps 5579de658000-5579de659000 r-xp 00000000 fd:00 3156044 /usr/bin/python2.7 5579de858000-5579de859000 r--p 00000000 fd:00 3156044 /usr/bin/python2.7 5579de859000-5579de85a000 rw-p 00001000 fd:00 3156044 /usr/bin/python2.7 7f0de01f7000-7f0de023e000 r-xp 00000000 00:2d 230695 /tmp/build/perf/python/perf.so 7f0de023e000-7f0de043d000 ---p 00047000 00:2d 230695 /tmp/build/perf/python/perf.so 7f0de043d000-7f0de043e000 r--p 00046000 00:2d 230695 /tmp/build/perf/python/perf.so 7f0de043e000-7f0de044b000 rw-p 00047000 00:2d 230695 /tmp/build/perf/python/perf.so 7f0de6f0f000-7f0de6f13000 r-xp 00000000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so 7f0de6f13000-7f0de7113000 ---p 00004000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so 7f0de7113000-7f0de7114000 r--p 00004000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so 7f0de7114000-7f0de7115000 rw-p 00005000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so 7f0de7e73000-7f0de8052000 r-xp 00000000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0 7f0de8052000-7f0de8251000 ---p 001df000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0 7f0de8251000-7f0de8255000 r--p 001de000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0 7f0de8255000-7f0de8291000 rw-p 001e2000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0 $ Signed-off-by: Jaroslav Škarvada <jskarvad@redhat.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> LPU-Reference: 20180119205641.24242-1-jskarvad@redhat.com Link: https://lkml.kernel.org/n/tip-8d7dt9kqp83vsz25hagug8fu@git.kernel.org [ Removed explicit check for python version, allowing it to really build with python3 ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-01-19 21:56:41 +01:00
#if PY_MAJOR_VERSION >= 3
return module;
#endif
perf tools: Initial python binding First clarifying that this kind of binding is not a replacement or an equivalent to the 'perf script' way of using python with perf. The 'perf script' way is to process events and look at a given script for some python function that matches the events to pass each event for processing. This is a python module, i.e. everything is driven from the python script, that merely uses "import perf" or "from perf import". perf script is focused on tracepoints, this binding is focused on profiling as an initial target. More work is needed to make available tracepoint specific variables as event variables accessible via this binding. There is one example of such usage model, in tools/perf/python/twatch.py, a tool to watch "cycles" events together with task (fork, exit) and comm perf events. For now, due to me not being able to grok how python distutils cope with building C extensions outside the sources dir the install target just builds it, I'm using it as: [root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/lib.linux-x86_64-2.6/ [root@emilia linux]# tools/perf/python/twatch.py cpu: 4, pid: 30126, tid: 30126 { type: mmap, pid: 30126, tid: 30126, start: 0x4, length: 0x82e9ca03, offset: 0, filename: } cpu: 6, pid: 47, tid: 47 { type: mmap, pid: 47, tid: 47, start: 0x6, length: 0xbef87c36, offset: 0, filename: } cpu: 1, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x1, length: 0x775d1904, offset: 0, filename: } cpu: 7, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0x7, length: 0xc750aeb6, offset: 0, filename: } cpu: 5, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x5, length: 0x76669635, offset: 0, filename: } cpu: 0, pid: 0, tid: 0 { type: mmap, pid: 0, tid: 0, start: 0, length: 0x6422ef6b, offset: 0, filename: } cpu: 2, pid: 2255, tid: 2255 { type: mmap, pid: 2255, tid: 2255, start: 0x2, length: 0xe078757a, offset: 0, filename: } cpu: 1, pid: 5769, tid: 5769 { type: fork, pid: 30127, ppid: 5769, tid: 30127, ptid: 5769, time: 103893991270534} cpu: 6, pid: 30127, tid: 30127 { type: comm, pid: 30127, tid: 30127, comm: ls } cpu: 6, pid: 30127, tid: 30127 { type: exit, pid: 30127, ppid: 30127, tid: 30127, ptid: 30127, time: 103893993273024} The first 8 mmap events in this 8 way machine are a mistery that is still being investigated. More of the tools/perf/util/ APIs will be exposed via this python binding as the need arises. For now the focus is on creating events and processing them, symbol resolution is an obvious next step, with tracepoint variables as a close second step. Cc: Clark Williams <williams@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-29 15:44:29 -02:00
}
perf python: Switch module to linking libraries from building source setup.py was building most perf sources causing setup.py to mimic the Makefile logic as well as flex/bison code to be stubbed out, due to complexity building. By using libraries fewer functions are stubbed out, the build is faster and the Makefile logic is reused which should simplify updating. The libraries are passed through LDFLAGS to avoid complexity in python. Force the -fPIC flag for libbpf.a to ensure it is suitable for linking into the perf python module. Signed-off-by: Ian Rogers <irogers@google.com> Reviewed-by: James Clark <james.clark@arm.com> Cc: Suzuki K Poulose <suzuki.poulose@arm.com> Cc: Kees Cook <keescook@chromium.org> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Nick Terrell <terrelln@fb.com> Cc: Gary Guo <gary@garyguo.net> Cc: Alex Gaynor <alex.gaynor@gmail.com> Cc: Boqun Feng <boqun.feng@gmail.com> Cc: Wedson Almeida Filho <wedsonaf@gmail.com> Cc: Ze Gao <zegao2021@gmail.com> Cc: Alice Ryhl <aliceryhl@google.com> Cc: Andrei Vagin <avagin@google.com> Cc: Yicong Yang <yangyicong@hisilicon.com> Cc: Jonathan Cameron <jonathan.cameron@huawei.com> Cc: Guo Ren <guoren@kernel.org> Cc: Miguel Ojeda <ojeda@kernel.org> Cc: Will Deacon <will@kernel.org> Cc: Mike Leach <mike.leach@linaro.org> Cc: Leo Yan <leo.yan@linux.dev> Cc: Oliver Upton <oliver.upton@linux.dev> Cc: John Garry <john.g.garry@oracle.com> Cc: Benno Lossin <benno.lossin@proton.me> Cc: Björn Roy Baron <bjorn3_gh@protonmail.com> Cc: Andreas Hindborg <a.hindborg@samsung.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20240625214117.953777-8-irogers@google.com
2024-06-25 14:41:16 -07:00
/* The following are stubs to avoid dragging in builtin-* objects. */
/* TODO: move the code out of the builtin-* file into util. */
unsigned int scripting_max_stack = PERF_MAX_STACK_DEPTH;
#ifdef HAVE_KVM_STAT_SUPPORT
perf python: Switch module to linking libraries from building source setup.py was building most perf sources causing setup.py to mimic the Makefile logic as well as flex/bison code to be stubbed out, due to complexity building. By using libraries fewer functions are stubbed out, the build is faster and the Makefile logic is reused which should simplify updating. The libraries are passed through LDFLAGS to avoid complexity in python. Force the -fPIC flag for libbpf.a to ensure it is suitable for linking into the perf python module. Signed-off-by: Ian Rogers <irogers@google.com> Reviewed-by: James Clark <james.clark@arm.com> Cc: Suzuki K Poulose <suzuki.poulose@arm.com> Cc: Kees Cook <keescook@chromium.org> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Nick Terrell <terrelln@fb.com> Cc: Gary Guo <gary@garyguo.net> Cc: Alex Gaynor <alex.gaynor@gmail.com> Cc: Boqun Feng <boqun.feng@gmail.com> Cc: Wedson Almeida Filho <wedsonaf@gmail.com> Cc: Ze Gao <zegao2021@gmail.com> Cc: Alice Ryhl <aliceryhl@google.com> Cc: Andrei Vagin <avagin@google.com> Cc: Yicong Yang <yangyicong@hisilicon.com> Cc: Jonathan Cameron <jonathan.cameron@huawei.com> Cc: Guo Ren <guoren@kernel.org> Cc: Miguel Ojeda <ojeda@kernel.org> Cc: Will Deacon <will@kernel.org> Cc: Mike Leach <mike.leach@linaro.org> Cc: Leo Yan <leo.yan@linux.dev> Cc: Oliver Upton <oliver.upton@linux.dev> Cc: John Garry <john.g.garry@oracle.com> Cc: Benno Lossin <benno.lossin@proton.me> Cc: Björn Roy Baron <bjorn3_gh@protonmail.com> Cc: Andreas Hindborg <a.hindborg@samsung.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20240625214117.953777-8-irogers@google.com
2024-06-25 14:41:16 -07:00
bool kvm_entry_event(struct evsel *evsel __maybe_unused)
{
perf python: Switch module to linking libraries from building source setup.py was building most perf sources causing setup.py to mimic the Makefile logic as well as flex/bison code to be stubbed out, due to complexity building. By using libraries fewer functions are stubbed out, the build is faster and the Makefile logic is reused which should simplify updating. The libraries are passed through LDFLAGS to avoid complexity in python. Force the -fPIC flag for libbpf.a to ensure it is suitable for linking into the perf python module. Signed-off-by: Ian Rogers <irogers@google.com> Reviewed-by: James Clark <james.clark@arm.com> Cc: Suzuki K Poulose <suzuki.poulose@arm.com> Cc: Kees Cook <keescook@chromium.org> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Nick Terrell <terrelln@fb.com> Cc: Gary Guo <gary@garyguo.net> Cc: Alex Gaynor <alex.gaynor@gmail.com> Cc: Boqun Feng <boqun.feng@gmail.com> Cc: Wedson Almeida Filho <wedsonaf@gmail.com> Cc: Ze Gao <zegao2021@gmail.com> Cc: Alice Ryhl <aliceryhl@google.com> Cc: Andrei Vagin <avagin@google.com> Cc: Yicong Yang <yangyicong@hisilicon.com> Cc: Jonathan Cameron <jonathan.cameron@huawei.com> Cc: Guo Ren <guoren@kernel.org> Cc: Miguel Ojeda <ojeda@kernel.org> Cc: Will Deacon <will@kernel.org> Cc: Mike Leach <mike.leach@linaro.org> Cc: Leo Yan <leo.yan@linux.dev> Cc: Oliver Upton <oliver.upton@linux.dev> Cc: John Garry <john.g.garry@oracle.com> Cc: Benno Lossin <benno.lossin@proton.me> Cc: Björn Roy Baron <bjorn3_gh@protonmail.com> Cc: Andreas Hindborg <a.hindborg@samsung.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20240625214117.953777-8-irogers@google.com
2024-06-25 14:41:16 -07:00
return false;
}
bool kvm_exit_event(struct evsel *evsel __maybe_unused)
{
return false;
}
bool exit_event_begin(struct evsel *evsel __maybe_unused,
struct perf_sample *sample __maybe_unused,
struct event_key *key __maybe_unused)
{
return false;
}
bool exit_event_end(struct evsel *evsel __maybe_unused,
struct perf_sample *sample __maybe_unused,
struct event_key *key __maybe_unused)
{
return false;
}
void exit_event_decode_key(struct perf_kvm_stat *kvm __maybe_unused,
struct event_key *key __maybe_unused,
char *decode __maybe_unused)
{
}
#endif // HAVE_KVM_STAT_SUPPORT
perf python: Switch module to linking libraries from building source setup.py was building most perf sources causing setup.py to mimic the Makefile logic as well as flex/bison code to be stubbed out, due to complexity building. By using libraries fewer functions are stubbed out, the build is faster and the Makefile logic is reused which should simplify updating. The libraries are passed through LDFLAGS to avoid complexity in python. Force the -fPIC flag for libbpf.a to ensure it is suitable for linking into the perf python module. Signed-off-by: Ian Rogers <irogers@google.com> Reviewed-by: James Clark <james.clark@arm.com> Cc: Suzuki K Poulose <suzuki.poulose@arm.com> Cc: Kees Cook <keescook@chromium.org> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Nick Terrell <terrelln@fb.com> Cc: Gary Guo <gary@garyguo.net> Cc: Alex Gaynor <alex.gaynor@gmail.com> Cc: Boqun Feng <boqun.feng@gmail.com> Cc: Wedson Almeida Filho <wedsonaf@gmail.com> Cc: Ze Gao <zegao2021@gmail.com> Cc: Alice Ryhl <aliceryhl@google.com> Cc: Andrei Vagin <avagin@google.com> Cc: Yicong Yang <yangyicong@hisilicon.com> Cc: Jonathan Cameron <jonathan.cameron@huawei.com> Cc: Guo Ren <guoren@kernel.org> Cc: Miguel Ojeda <ojeda@kernel.org> Cc: Will Deacon <will@kernel.org> Cc: Mike Leach <mike.leach@linaro.org> Cc: Leo Yan <leo.yan@linux.dev> Cc: Oliver Upton <oliver.upton@linux.dev> Cc: John Garry <john.g.garry@oracle.com> Cc: Benno Lossin <benno.lossin@proton.me> Cc: Björn Roy Baron <bjorn3_gh@protonmail.com> Cc: Andreas Hindborg <a.hindborg@samsung.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20240625214117.953777-8-irogers@google.com
2024-06-25 14:41:16 -07:00
int find_scripts(char **scripts_array __maybe_unused, char **scripts_path_array __maybe_unused,
int num __maybe_unused, int pathlen __maybe_unused)
{
return -1;
}
void perf_stat__set_no_csv_summary(int set __maybe_unused)
{
}
void perf_stat__set_big_num(int set __maybe_unused)
{
}
int script_spec_register(const char *spec __maybe_unused, struct scripting_ops *ops __maybe_unused)
{
return -1;
}
arch_syscalls__strerrno_t *arch_syscalls__strerrno_function(const char *arch __maybe_unused)
{
return NULL;
}
struct kwork_work *perf_kwork_add_work(struct perf_kwork *kwork __maybe_unused,
struct kwork_class *class __maybe_unused,
struct kwork_work *key __maybe_unused)
{
return NULL;
}
void script_fetch_insn(struct perf_sample *sample __maybe_unused,
struct thread *thread __maybe_unused,
struct machine *machine __maybe_unused)
{
}
int perf_sample__sprintf_flags(u32 flags __maybe_unused, char *str __maybe_unused,
size_t sz __maybe_unused)
{
return -1;
}
bool match_callstack_filter(struct machine *machine __maybe_unused, u64 *callstack __maybe_unused)
{
return false;
}
struct lock_stat *lock_stat_find(u64 addr __maybe_unused)
{
return NULL;
}
struct lock_stat *lock_stat_findnew(u64 addr __maybe_unused, const char *name __maybe_unused,
int flags __maybe_unused)
{
return NULL;
}
perf evlist: Free stats in all evlist destruction There is no evsel free stats, freeing in the evlist__delete ensures memory leaks are avoided. Issues detected with "perf stat report" and leak sanitizer, perf stat uses perf_session__delete to free the evlist. Add dummy symbol for python build. Signed-off-by: Ian Rogers <irogers@google.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ali Saidi <alisaidi@amazon.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Cc: Brian Robbins <brianrob@linux.microsoft.com> Cc: Changbin Du <changbin.du@huawei.com> Cc: Dmitrii Dolgov <9erthalion6@gmail.com> Cc: Fangrui Song <maskray@google.com> Cc: German Gomez <german.gomez@arm.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Ivan Babrou <ivan@cloudflare.com> Cc: James Clark <james.clark@arm.com> Cc: Jing Zhang <renyu.zj@linux.alibaba.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: John Garry <john.g.garry@oracle.com> Cc: K Prateek Nayak <kprateek.nayak@amd.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Liam Howlett <liam.howlett@oracle.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Miguel Ojeda <ojeda@kernel.org> Cc: Mike Leach <mike.leach@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ravi Bangoria <ravi.bangoria@amd.com> Cc: Sean Christopherson <seanjc@google.com> Cc: Steinar H. Gunderson <sesse@google.com> Cc: Suzuki Poulouse <suzuki.poulose@arm.com> Cc: Wenyu Liu <liuwenyu7@huawei.com> Cc: Will Deacon <will@kernel.org> Cc: Yang Jihong <yangjihong1@huawei.com> Cc: Ye Xingchen <ye.xingchen@zte.com.cn> Cc: Yuan Can <yuancan@huawei.com> Cc: coresight@lists.linaro.org Cc: linux-arm-kernel@lists.infradead.org Link: https://lore.kernel.org/r/20230608232823.4027869-14-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-06-08 16:28:10 -07:00
perf python: Switch module to linking libraries from building source setup.py was building most perf sources causing setup.py to mimic the Makefile logic as well as flex/bison code to be stubbed out, due to complexity building. By using libraries fewer functions are stubbed out, the build is faster and the Makefile logic is reused which should simplify updating. The libraries are passed through LDFLAGS to avoid complexity in python. Force the -fPIC flag for libbpf.a to ensure it is suitable for linking into the perf python module. Signed-off-by: Ian Rogers <irogers@google.com> Reviewed-by: James Clark <james.clark@arm.com> Cc: Suzuki K Poulose <suzuki.poulose@arm.com> Cc: Kees Cook <keescook@chromium.org> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Nick Terrell <terrelln@fb.com> Cc: Gary Guo <gary@garyguo.net> Cc: Alex Gaynor <alex.gaynor@gmail.com> Cc: Boqun Feng <boqun.feng@gmail.com> Cc: Wedson Almeida Filho <wedsonaf@gmail.com> Cc: Ze Gao <zegao2021@gmail.com> Cc: Alice Ryhl <aliceryhl@google.com> Cc: Andrei Vagin <avagin@google.com> Cc: Yicong Yang <yangyicong@hisilicon.com> Cc: Jonathan Cameron <jonathan.cameron@huawei.com> Cc: Guo Ren <guoren@kernel.org> Cc: Miguel Ojeda <ojeda@kernel.org> Cc: Will Deacon <will@kernel.org> Cc: Mike Leach <mike.leach@linaro.org> Cc: Leo Yan <leo.yan@linux.dev> Cc: Oliver Upton <oliver.upton@linux.dev> Cc: John Garry <john.g.garry@oracle.com> Cc: Benno Lossin <benno.lossin@proton.me> Cc: Björn Roy Baron <bjorn3_gh@protonmail.com> Cc: Andreas Hindborg <a.hindborg@samsung.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20240625214117.953777-8-irogers@google.com
2024-06-25 14:41:16 -07:00
int cmd_inject(int argc __maybe_unused, const char *argv[] __maybe_unused)
perf evlist: Free stats in all evlist destruction There is no evsel free stats, freeing in the evlist__delete ensures memory leaks are avoided. Issues detected with "perf stat report" and leak sanitizer, perf stat uses perf_session__delete to free the evlist. Add dummy symbol for python build. Signed-off-by: Ian Rogers <irogers@google.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ali Saidi <alisaidi@amazon.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Cc: Brian Robbins <brianrob@linux.microsoft.com> Cc: Changbin Du <changbin.du@huawei.com> Cc: Dmitrii Dolgov <9erthalion6@gmail.com> Cc: Fangrui Song <maskray@google.com> Cc: German Gomez <german.gomez@arm.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Ivan Babrou <ivan@cloudflare.com> Cc: James Clark <james.clark@arm.com> Cc: Jing Zhang <renyu.zj@linux.alibaba.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: John Garry <john.g.garry@oracle.com> Cc: K Prateek Nayak <kprateek.nayak@amd.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Liam Howlett <liam.howlett@oracle.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Miguel Ojeda <ojeda@kernel.org> Cc: Mike Leach <mike.leach@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ravi Bangoria <ravi.bangoria@amd.com> Cc: Sean Christopherson <seanjc@google.com> Cc: Steinar H. Gunderson <sesse@google.com> Cc: Suzuki Poulouse <suzuki.poulose@arm.com> Cc: Wenyu Liu <liuwenyu7@huawei.com> Cc: Will Deacon <will@kernel.org> Cc: Yang Jihong <yangjihong1@huawei.com> Cc: Ye Xingchen <ye.xingchen@zte.com.cn> Cc: Yuan Can <yuancan@huawei.com> Cc: coresight@lists.linaro.org Cc: linux-arm-kernel@lists.infradead.org Link: https://lore.kernel.org/r/20230608232823.4027869-14-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-06-08 16:28:10 -07:00
{
perf python: Switch module to linking libraries from building source setup.py was building most perf sources causing setup.py to mimic the Makefile logic as well as flex/bison code to be stubbed out, due to complexity building. By using libraries fewer functions are stubbed out, the build is faster and the Makefile logic is reused which should simplify updating. The libraries are passed through LDFLAGS to avoid complexity in python. Force the -fPIC flag for libbpf.a to ensure it is suitable for linking into the perf python module. Signed-off-by: Ian Rogers <irogers@google.com> Reviewed-by: James Clark <james.clark@arm.com> Cc: Suzuki K Poulose <suzuki.poulose@arm.com> Cc: Kees Cook <keescook@chromium.org> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Nick Terrell <terrelln@fb.com> Cc: Gary Guo <gary@garyguo.net> Cc: Alex Gaynor <alex.gaynor@gmail.com> Cc: Boqun Feng <boqun.feng@gmail.com> Cc: Wedson Almeida Filho <wedsonaf@gmail.com> Cc: Ze Gao <zegao2021@gmail.com> Cc: Alice Ryhl <aliceryhl@google.com> Cc: Andrei Vagin <avagin@google.com> Cc: Yicong Yang <yangyicong@hisilicon.com> Cc: Jonathan Cameron <jonathan.cameron@huawei.com> Cc: Guo Ren <guoren@kernel.org> Cc: Miguel Ojeda <ojeda@kernel.org> Cc: Will Deacon <will@kernel.org> Cc: Mike Leach <mike.leach@linaro.org> Cc: Leo Yan <leo.yan@linux.dev> Cc: Oliver Upton <oliver.upton@linux.dev> Cc: John Garry <john.g.garry@oracle.com> Cc: Benno Lossin <benno.lossin@proton.me> Cc: Björn Roy Baron <bjorn3_gh@protonmail.com> Cc: Andreas Hindborg <a.hindborg@samsung.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20240625214117.953777-8-irogers@google.com
2024-06-25 14:41:16 -07:00
return -1;
perf evlist: Free stats in all evlist destruction There is no evsel free stats, freeing in the evlist__delete ensures memory leaks are avoided. Issues detected with "perf stat report" and leak sanitizer, perf stat uses perf_session__delete to free the evlist. Add dummy symbol for python build. Signed-off-by: Ian Rogers <irogers@google.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ali Saidi <alisaidi@amazon.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Cc: Brian Robbins <brianrob@linux.microsoft.com> Cc: Changbin Du <changbin.du@huawei.com> Cc: Dmitrii Dolgov <9erthalion6@gmail.com> Cc: Fangrui Song <maskray@google.com> Cc: German Gomez <german.gomez@arm.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Ivan Babrou <ivan@cloudflare.com> Cc: James Clark <james.clark@arm.com> Cc: Jing Zhang <renyu.zj@linux.alibaba.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: John Garry <john.g.garry@oracle.com> Cc: K Prateek Nayak <kprateek.nayak@amd.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Liam Howlett <liam.howlett@oracle.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Miguel Ojeda <ojeda@kernel.org> Cc: Mike Leach <mike.leach@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ravi Bangoria <ravi.bangoria@amd.com> Cc: Sean Christopherson <seanjc@google.com> Cc: Steinar H. Gunderson <sesse@google.com> Cc: Suzuki Poulouse <suzuki.poulose@arm.com> Cc: Wenyu Liu <liuwenyu7@huawei.com> Cc: Will Deacon <will@kernel.org> Cc: Yang Jihong <yangjihong1@huawei.com> Cc: Ye Xingchen <ye.xingchen@zte.com.cn> Cc: Yuan Can <yuancan@huawei.com> Cc: coresight@lists.linaro.org Cc: linux-arm-kernel@lists.infradead.org Link: https://lore.kernel.org/r/20230608232823.4027869-14-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-06-08 16:28:10 -07:00
}